PLASMA CUTTING13 60363 Doubel poni ted spacer 14 51970 Shield cup, hand (for extended tips 51102.09 and 51095/L) 15 51971 Spacer for contact cutting, hand (for extended tips 51102/S

PLASMA CUTTING

The new series of Torcheswith High Frequency Start

LT-50LT-70LT-90LT-120LT-150

LT-81LT-101LT-141LT-151

Higher performances

Cleaner cut

Faster speed

TEC.MO. s.r.l. Via Rio Fabbiani 8 - 40067 RASTIGNANO - BOLOGNA - ITALY E-mail: [email protected]

Suitable for: CEBORA® P50

Suitable for: CEBORA® P70

Suitable for: CEBORA® CP90 - CP91

Suitable for: LINCOLN® T100

Suitable for: CEBORA® P150 - CP160

Suitable for: TRAFIMET® A80 - Ergocut A81




LLLLLTTTTT-50-50-50-50-50 Suitable for: CEBORA® P50 ________________________ page ........... 4

LLLLLTTTTT-70-70-70-70-70 Suitable for: CEBORA® P70 ________________________ page ........... 6

LLLLLTTTTT-90-90-90-90-90 Suitable for: CEBORA® CP90 - CP91 ________________ page ........... 8

LLLLLTTTTT-120-120-120-120-120 Suitable for: LINCOLN® T100 _______________________ page ......... 10

LLLLLTTTTT-150-150-150-150-150 Suitable for: CEBORA® P150 - CP160 ________________ page ......... 12

LLLLLTTTTT-81-81-81-81-81 Suitable for: TRAFIMET® A80 - Ergocut A81 ____________ page ......... 14

LLLLLTTTTT-101-101-101-101-101 Suitable for: TRAFIMET® A90 - Ergocut 101 ____________ page ......... 16

LLLLLTTTTT-141-141-141-141-141 Suitable for: TRAFIMET® A140 - Ergocut 141 ___________ page ......... 18

LLLLLTTTTT-151-151-151-151-151 Suitable for: TRAFIMET® R145 - Ergocut A151 __________ page ......... 20

Torches and Leads _______________________________________ page ......... 22

INDEX

s.r.l.

Via Rio Fabbiani 8 - 40067 RASTIGNANO - BOLOGNA - ITALY E-mail: [email protected]

The new series of Torcheswith High Frequency Start

4

2013.10.A-LT-RPTplasma cutting torches

LLLLLTTTTT-----5050505050

IEC 60974-7

Suitable for: CEBORA® P50Max Current : 50 AmpsDuty Cycle: 50 Amps- 60%Gas: AirGas Pressure: 70 psi ( 4.5-5.0 bar )Gas Flow: 250 scfh ( 120 lpm )Post Flow Time: 90 sec. recommendedPilot : Electrode to TipIgnition: HF

Standard Layout

1

22a

3

3a

49

5 5

6 7 8 10 11

12 12

13

TEC.MO. srl is in no way affiliated with CEBORA®. The parts advertised for sale are not genuine CEBORA® parts, but are parts made for and by TEC.MO.

srl. Reference to CEBORA® machine, torches and numbers are for your convenience only. We reserve the right to substitute genuine CEBORA® parts in

place of TEC.MO. srl parts.

5

plasma cutting torches

TEC.MO. s.r.l. Tel. 051 - 743.123 / Fax 051 - 743.758Via Rio Fabbiani 8 Website: http://WWW.tecmo.it40067 RASTIGNANO (BO) ITALY E-mail: [email protected]

2013.10.A-LT-RPT

LLLLLTTTTT-----5050505050Replacement Parts Suitable for: CEBORA® P50

Torch parts

Item# ref. Catalog # Description

1 01001/KIT Torch Head complete with handle

2 01001 Hand torch head

2a 01000.60 O - Ring

3 09606 Handgrip with microswitch

3a 07301.20 Switch

4 1521 52512/L Electrode - Hf.

5 60001 Swirl ring

6 1304 51100 Tip ø 1.0

1396 51095 Tip long life ø 1.0

51100/S Tip long life ø 1.1

7 51099 Flat tip ø 1.0.

8 1305 51098 Conical tip ø 1.0 (Lo - Amp.)

9 1518 52513/L Extended electrode - Hf.

10 1370 51102 Extended tip, ø 1.0

1395 51095/L Extended tip, long life ø 1.0

51102/S Extended tip, long life ø 1.1

11 1306 51101 Extended conical tip ø 1.0 (Lo - Amp.)

12 5.710.121 60320 Nozzle retaining cap

13 51965 Shield cup, hand ( for extended tips 51095/L, 51102/S and 51101 )

Accessories

166 51850 Circle cutting attachment

154 51806 Cutting guide

Torches and Leads

see page # 22

6


LLLLLTTTTT-----7070707070Suitable for: CEBORA® P70Max Current : 70 AmpsDuty Cycle: 70 Amps- 60%Gas: AirGas Pressure: 70 psi ( 4.5-5.0 bar )Gas Flow: 275 scfh ( 130 lpm )Post Flow Time: 90 sec. recommendedPilot : Electrode to TipIgnition: HF

1

22a

3

3a

2b

9

4

5

6 7 8 10

11

12 14

13

5

11

16

15

17

Standard Layout

19




IEC 60974-7

18

7



2013.10.A-LT-RPT

Replacement Parts Suitable for: CEBORA® P70

Torch partsItem# ref. Catalog # Description



2a 01000.60 O - Ring

2b 3.065204 01070.42 Diffusor


3a 07301.20 Switch

4 1402 52551 Electrode

5 60001 Swirl ring

6 1309 51100.09 Tip ø 0.9 - 35A

1396 51095 Tip long life ø 1.0 - 50A

51100/S Tip long life ø 1.1 - 60A

51096 Tip long life ø 1.2 - 70A

1308 51100.12 Tip ø 1.2 - 70A

7 51099 Flat tip ø 1.0

51099.12 Flat tip ø 1.2

8 1305 51098 Conical tip ø 1.0 (Lo - Amp.)

51098.12 Conical tip ø 1.2

9 1368 52553 Extended electrode

10 1366 51102.09 Extended tip ø 0.9 - 35A

1395 51095/L Extended tip long life ø 1.0 - 50A

51102/S Extended tip long life ø 1.1 - 60A

51096/L Extended tip long life ø 1.2 - 70A

11 5.710.171 60321 Nozzle retaining cap

12 1394 51901 Spacer spring

13 60363 Double pointed spacer

14 51970 Shield cup, hand (for extended tips 51102.09 and 51095/L)

15 51971 Spacer for contact cutting, hand (for extended tips 51102/S and 51096/L)

16 51097.10 Extended Tip, 50A, Shielded51097.11 Extended Tip, 60A, Shielded51097.12 Extended Tip, 70A, Shielded

17 60321C Shield Cup Body CW18 60503L Extended Shield Cap 50-70A19 3.045.012 Wrench for electrode

Accessories166-70 51849 Circle cutting attachment

154-70 51801 Cutting guide


8


LLLLLTTTTT-----9090909090Suitable for: CEBORA® CP90 - CP91Max Current : 90 AmpsDuty Cycle: 90 Amps- 60%Gas: AirGas Pressure: 70 psi ( 4.5-5.0 bar )Gas Flow: 340 scfh ( 160 lpm )Post Flow Time: 90 sec. recommendedPilot : Electrode to TipIgnition: HF

1

22a

3

3a

2b

9

4

67

8

10

15

5

Standard Layout




IEC 60974-7

11

12

13 14

9



2013.10.A-LT-RPT

LLLLLTTTTT-----9090909090Replacement Parts Suitable for: CEBORA® CP90 - CP91

Torch parts




2a 3.160.067 01000.60 O - Ring

2b 01090.42 Diffusor


3a 07301.20 Switch

4 1368 52553 Electrode

5 60001 Swirl ring

6 51090 Tip long life ø 1.2 -20-50A (for use with item. 9 only)

7 51092 Tip long life ø 1.2 - 50-70A (for use with item. 9-10 only)

51093 Tip long life ø 1.3 - 70-90A (for use with item. 9-10 only)

8 60322 Nozzle retaining cap

9 51972 Shield cup, hand

10 51973 Spacer for contact cutting, hand

11 51097.10 Extended Tip, 50A, Shielded

51097.11 Extended Tip, 60A, Shielded



12 60322C Shield Cup Body CCW

13 60503L Extended Shield Cap 50-70A

14 60504L Extended Shield Cap 80-100A

15 3.045.012 60368 Wrench for electrode

Accessories

163 51848 Circle cutting attachment

153 51818 Cutting guide

Torches and Leads

see page # 22

10


15

Suitable for: LINCOLN® T100Max Current : 100AmpsDuty Cycle: 100 Amps - 60%Gas: AirGas Pressure: 70 psi ( 4.5-5.0 bar )Gas Flow: 380 scfh ( 180 lpm )Post Flow Time: 90 sec. recommendedPilot : Electrode to TipIgnition: HF

1

22a

3

3a

9

4

6 7

8

10 11

5

Standard Layout

LLLLLTTTTT-----120120120120120

2b

2c

5

11

12 13 13 13 13 13 13

23 14 17 1819 19 20

21

22

24

25

26

16

27

28

TEC.MO. srl is in no way affiliated with LINCOLN®. The parts advertised for sale are not genuine LINCOLN® parts, but are parts made for and by TEC.MO.

srl. Reference to LINCOLN® machine, torches and numbers are for your convenience only. We reserve the right to substitute genuine LINCOLN® parts

in place of TEC.MO. srl parts.

IEC 60974-7

11



2013.10.A-LT-RPT

LLLLLTTTTT-----120120120120120Replacement Parts Suitable for: LINCOLN® T100


1 01201/KIT Torch Head complete with handle2 01201 Hand torch head2a W0300121 02000.60 O - Ring2b 60085 Front insulator

2c W0300122 06004 Diffusor3 09706 Handgrip with microswitch3a W0300103 07301.20 Switch4 W0300123 52540 Electrode5 W0300124 60020 Swirl ring6 51140/S Tip long life ø 1,10 ( replaces W0300125 )

W0300174 51141/S Tip long life ø 1,35 ( replaces W0300126)W0300175 51142/S Tip long life ø 1,60 ( replaces W0300127 )W0300128 51144.24 Gouging tip ø 2,4

7 W0300135 51410 Contact tip ø 1,35W0300137 51411 Contact tip ø 1,6

8 06005 Extended diffusor9 W0300133 52549 Extended electrode10 W0300134 51148 Extended tip ( for contact cutting max. 50A )11 W0300178 51148.13 Extended tip ø 1,35 - 90A - ( for 51958 + 51959 or 60380 )

W0300179 51148.16 Extended tip ø 1,6 - 120A - ( for 51958 + 51959 or 60380 )12 W0300129 60328 Nozzle retaining cap13 W0300138 60348 Contact nozzle retaining cap

60348/V Contact nozzle retaining cap, Max.life14 W0300244 51952 Spring holder protection nut15 W0300245 51911 Spacer spring for code 5195216 51953 Gouging spacer17 W0300180 51950 Spacer for contact cutting, hand18 51930 Spacer for contact cutting, hand19 W0300182 51957 Shield cup, hand ( max. 50A )20 W0300183 51958 Spacer for contact cutting, hand21 51974 Spacer for extended tips High Amp.22 W0300184 51959 Locking nut23 WO300130 51910 Spacer spring24 W0300131 60370 Double pointed spacer25 W0300177 60371 Crown spacer26 W0300132 60373 Gouging spacer27 W0300142 60369 Extractor for swirl ring28 W0300119 60368 Wrench for electrode

Accessories51851 Circle cutting attachment51807 Cutting guide

Torches and Leadssee page # 22

12


LLLLLTTTTT-----150150150150150

15

Suitable for: CEBORA® P150 - CP160Max Current : 150AmpsDuty Cycle: 150 Amps - 60%Gas: AirGas Pressure: 70 psi ( 4.5-5.0 bar )Gas Flow: 470 scfh ( 220 lpm )Post Flow Time: 90 sec. recommendedPilot : Electrode to TipIgnition: HF

1

22a

3

3a

9

4

6 7

8

10 11

5

Standard Layout

2b

2c

5

11

1213 13 13 13 13 13

2314 17 18

19 19 20

21

22

24

25

26

16

28

27




IEC 60974-7

13



2013.10.A-LT-RPT

Replacement Parts Suitable for: CEBORA® P150 - CP160


1 02001/KIT Torch Head complete with handle2 02001 Hand torch head2a 1398 02000.60 O - Ring2b 60080 Front insulator

2c 1378 05004 Diffusor3 09706 Handgrip with microswitch3a 07301.20 Switch4 1376 52540 Electrode5 1377 60020 Swirl ring6 1371 51140/S Tip long life ø 1,10

1372 51141/S Tip long life ø 1,351373 51142/S Tip long life ø 1,601374 51143/S Tip long life ø 1,801375 51144 Gouging tip ø 3.0

7 51410 Contact tip ø 1,3551411 Contact tip ø 1,651412 Contact tip ø 1,8

8 05005 Extended diffusor9 1517 52549 Extended electrode10 1369 51148 Extended tip ( for contact cutting max. 50A )11 51148.13 Extended tip ø 1,35 - 90A - ( for 51958 + 51959 or 60380 )

51148.16 Extended tip ø 1,6 - 120A - ( for 51958 + 51959 or 60380 )51148.18 Extended tip ø 1,8 - 150A - ( for 51958 + 51959 or 60380 )

12 1389 60330 Nozzle retaining cap13 60350 Contact nozzle retaining cap

60350/V Contact nozzle retaining cap, Max.life14 51952 Spring holder protection nut15 51911 Spacer spring for code 5195216 51953 Gouging spacer17 51950 Spacer for contact cutting, hand18 51930 Spacer for contact cutting, hand19 51957 Shield cup, hand ( max. 50A )20 51958 Spacer for contact cutting, hand21 51974 Spacer for extended tips High Amp.22 51959 Locking nut23 1386 51910 Spacer spring24 1408 60370 Double pointed spacer25 60371 Crown spacer26 1406 60373 Gouging spacer27 1509 60369 Extractor for swirl ring28 3.045.010 60368 Wrench for electrode

Accessories169 51851 Circle cutting attachment155 51807 Cutting guide


LLLLLTTTTT-----150150150150150

14


Suitable for: TRAFIMET® A80 - Ergocut A81Max Current : 80 AmpsDuty Cycle: 80 Amps- 60%Gas: AirGas Pressure: 70 psi ( 4.5-5.0 bar )Gas Flow: 340 scfh ( 160 lpm )Post Flow Time: 90 sec. recommendedPilot : Electrode to TipIgnition: HF

1

2

3a

3

2a

2b 7

4 8

5

69

10

12

13

11

Standard Layout

TEC.MO. srl is in no way affiliated with TRAFIMET®. The parts advertised for sale are not genuine TRAFIMET® parts, but are parts made for and by TEC.MO.

srl. Reference to TRAFIMET® machine, torches and numbers are for your convenience only. We reserve the right to substitute genuine TRAFIMET® parts


IEC 60974-7


15



2013.10.A-LT-RPT

Replacement Parts Suitable for: TRAFIMET® A80 - Ergocut A81

Torch parts


1 PF 0140 06802/KIT Hand Torch Head complete with handle


2a EA 0125 07300.60 O - Ring

2b FH 0560 06801.42 Diffusor

3 09706 Handgrip with switch

3a BX 0020 07301.20 Switch

4 PR 0109 52580/S Electrode - Maximum Life

5 PE 0107 60029 Swirl ring

6 PD 0105-10 51170 Tip 1.0

PD 0105-11 51172 Tip 1.1

PD 0105-12 51172.12 Tip 1.2

7 FH 0561 06801.43 Extended diffusor

8 PR 0115 52581/S Extended electrode - Maximum Life

9 PD 0106-10 51171.10 Extended tip 1.0

PD 0106-12 51173 Extended tip 1.2

10 PC 0115 60384 Nozzle retaining cap

11 CV 0201 51976 Spacer for contact cutting

12 CV 0033 60378 Crown spacer

13 CV 0028 51902 Spacer spring

Accessories

51861 Circle cutting attachment

51817 Cutting guide

Torches and Leads

see page # 22


16


LLLLLTTTTT-----101101101101101

15

Suitable for: TRAFIMET® A90 - Ergocut 101Max Current : 100AmpsDuty Cycle: 100 Amps - 60%Gas: AirGas Pressure: 70 psi ( 4.5-5.0 bar )Gas Flow: 380 scfh ( 180 lpm )Post Flow Time: 90 sec. recommendedPilot : Electrode to TipIgnition: HF

1

22a

3

3a

9

4

6

78

10

5

Standard Layout

2b

2c

12 13 13 13 13

11

22 14 18

19 20

21

17

23

24

16

26

25




IEC 60974-7

17



2013.10.A-LT-RPT

LLLLLTTTTT-----101101101101101Replacement Parts Suitable for: TRAFIMET® A90 - Ergocut 101


1 PF 0145 06001/KIT Torch Head complete with handle


2a EA 0131 06000.60 O - Ring

2b 60085 Front insulator

2c 06004 Diffusor


3a BX 0020 07301.20 Switch

4 PR 0101 52535 Electrode

5 PE 0101 60030 Swirl ring

6 PD 0101-11 51154 Tip ø 1.1

PD 0101-14 51155 Tip ø 1.4

PD 0101-17 51156 Tip ø 1.7

7 06005 Extended Diffusor

8 PR 0116 52530 Extended electrode

9 PE 0103 60031 Insulating spacer

10 PD 0111 51149 Extended tip ø 1.2 ( max 50A )

11 PD 0117-14 51149.14 Extended tip ø 1.4 - ( for use with item. 25+26 )

PD 0117-17 51149.17 Extended tip ø 1.7 - ( for use with item. 25+26 )


12 PC 0109/0111 60376 Nozzle retaining cap, long life

13 PC 0113/0130 60386 Contact nozzle retaining cap

PC 0113/0130 60386/V Contact nozzle retaining cap, Max.life

14 CV 0023 51940 Spacer for contact cutting

15 CV 0039 51945 Large spacer for contact cutting

16 51952 Spring holder protection nut

17 51911 Spacer spring for code 51952


19 CV 0008 51957 Shield cup, hand ( max. 50A ) ( for use with item. 21 only )

20 CV 0009 51958 Spacer for contact cutting, hand ( for use with item. 21 only )

21 51959 Locking nut

22 CV 0011 51910 Spacer spring

23 CV 0012 60370 Double pointed spacer

24 CV 0014 60371 Crown spacer

25 GR 60 60369 Extractor for swirl ring

26 60368 Wrench for electrode

Accessories51851 Circle cutting attachment

51807 Cutting guide


18


15

Suitable for: TRAFIMET® A140 - Ergocut 141Max Current : 150AmpsDuty Cycle: 150 Amps - 60%Gas: AirGas Pressure: 70 psi ( 4.5-5.0 bar )Gas Flow: 470 scfh ( 220 lpm )Post Flow Time: 90 sec. recommendedPilot : Electrode to TipIgnition: HF

1

22a

3

3a

10

4

6

7 8

11

5

Standard Layout

2b

2c

1213 13 13 13

23 14 1820 21

22

17

24

2516

27

26

LLLLLTTTTT-----141141141141141

9

18

28




IEC 60974-7

19



2013.10.A-LT-RPT

LLLLLTTTTT-----141141141141141Replacement Parts Suitable for: TRAFIMET® A140 - Ergocut 141


1 PF 0155 06201/KIT Torch Head complete with handle2 06201 Hand torch head2a EA 0131 06000.60 O - Ring2b 60080 Front insulator

2c 05004 Diffusor3 09706 Handgrip with microswitch3a BX 0020 07301.20 Switch4 PR 0101 52535 Electrode5 PE 0101 60030 Swirl ring6 PD 0101-11 51154 Tip ø 1.1

PD 0101-14 51155 Tip ø 1.4PD 0101-17 51156 Tip ø 1.7PD 0101-19 51157 Tip ø 1.9PD 0101-30 51158 Gouging tip ø 3.0

7 05005 Extended Diffusor8 PR 0116 52530 Extended electrode9 PE 0103 60031 Insulating spacer10 PD 0111 51149 Extended tip ø 1.2 ( max 50A )11 PD 0117-14 51149.14 Extended tip ø 1.4 - ( for use with item. 25+26 )

PD 0117-17 51149.17 Extended tip ø 1.7 - ( for use with item. 25+26 )PD 0117-19 51149.19 Extended tip ø 1.9 - ( for use with item. 25+26 )

12 PC 0101/0102 60375 Nozzle retaining cap, long life13 PC 0103/0131 60385 Contact nozzle retaining cap

PC 0103/0131 60385/V Contact nozzle retaining cap, Max.life14 CV 0023 51940 Spacer for contact cutting15 CV 0039 51945 Large spacer for contact cutting16 51952 Spring holder protection nut17 51911 Spacer spring for code 5195218 51953 Gouging spacer19 51950 Spacer for contact cutting, hand20 CV 0008 51957 Shield cup, hand ( max. 50A ) ( for use with item. 21 only )21 CV 0009 51958 Spacer for contact cutting, hand ( for use with item. 21 only )22 51959 Locking nut23 CV 0011 51910 Spacer spring24 CV 0012 60370 Double pointed spacer25 CV 0014 60371 Crown spacer26 CV 0013 60373 Gouging spacer27 GR 60 60369 Extractor for swirl ring28 60368 Wrench for electrode

Accessories51851 Circle cutting attachment51807 Cutting guide


20


Suitable for: TRAFIMET® R145 - Ergocut A151Max Current : 150AmpsDuty Cycle: 150 Amps - 60%Gas: AirGas Pressure: 70 psi ( 4.5-5.0 bar )Gas Flow: 470 scfh ( 220 lpm )Post Flow Time: 90 sec. recommendedPilot : Electrode to TipIgnition: HF

1

2 3a

3

2a

6

7 8

11

12

5

4

10

13

14

5

9

1519

17

18

21

14 14 14

2016

LLLLLTTTTT-----151151151151151

2b

2c

Standard Layout




IEC 60974-7

21



2013.10.A-LT-RPT

Replacement Parts Suitable for: R145 - Ergocut A151

Torch parts


1 PF 0160 06901/KIT Hand Torch Head complete with handle


2a EA 0131 06000.60 O - Ring

2b 60080 Front insulator

2c 05004 Diffusor

3 09706 Handgrip with switch

3a BX 0020 07301.20 Switch

4 PR 0111 52534 Electrode

5 PE 0103 60031 Insulating spacer

6 PD 0109-14 51241 Tip ø 1.4

PD 0109-16 51242 Tip ø 1.6

PD 0109-18 51243 Tip ø 1.8

PD 0109-30 51244 Gouging tip ø 3.0

7 05005 Extended Diffusor

8 PR 0116 52530 Extended electrode

9 PD 0111 51149 Extended tip ø 1.2 ( max 50A )

10 PD 0117-14 51149.14 Extended tip ø 1.4 - ( for use with item. 25+26 )



11 PC 0120 60387 Nozzle retaining cap

12 BW 0139 60388 Nozzle shield

13 CV 1105 60379 Cage spacer

14 PC 0103/0131 60385 Contact nozzle retaining cap

PC 0103/0131 60385/V Contact nozzle retaining cap, Max.life

15 51952 Spring holder protection nut

16 51911 Spacer spring for code 51952

17 51953 Gouging spacer


19 CV 0008 51957 Shield cup, hand ( tip max. 50A ) (for use with item. 26 only )

20 CV 0009 51958 Spacer for contact cutting, hand (for use with item. 26 only )

21 51959 Locking nut

Accessories

51851 Circle cutting attachment

51807 Cutting guide

Torches and Leads

see page # 22

LLLLLTTTTT-----151151151151151

22


LT-50 Suitable for: CEBORA® P50

ref. Catalog # Description1526 03050LT Hand torch complete with 6 mts cable ( 1/8" connection )1574 03051LT Hand torch complete with 6 mts cable ( central connector )

03150LT Hand torch complete with 12 mts cable ( 1/8" connection )03151LT Hand torch complete with 12 mts cable ( central connector )

1344 03240 Air and power cable 6 mts 1/8"03250 Air and power cable 12 mts 1/8"

LT-70 Suitable for: CEBORA® P70

ref. Catalog # Description1564 03070LTS Hand torch complete with 6 mts cable ( 1/8" connection )1573 03071LTS Hand torch complete with 6 mts cable ( central connector )

03170LTS Hand torch complete with 12 mts cable ( 1/8" connection )1573.20 03171LTS Hand torch complete with 12 mts cable ( central connector )1344 03240/S Air and power cable 6 mts 1/8"

03250/S Air and power cable 12 mts 1/8"

LT-90 Suitable for: CEBORA® CP90 - CP91

ref. Catalog # Description1215 03090LTS Hand torch complete with 6 mts cable ( 1/8" connection )1214 03091LTS Hand torch complete with 6 mts cable ( central connector )1215 03190LTS Hand torch complete with 12 mts cable ( 1/8" connection )1214.20 03191LTS Hand torch complete with 12 mts cable ( central connector )

03092/S Air and power cable 6 mts 1/8" ( 1/8" connection )03192/S Air and power cable 12 mts 1/8" ( 1/8" connection )

LT-120 Suitable for: LINCOLN® T100

ref. Catalog # DescriptionW0400052 01252LTS Hand torch complete with 6 mts cable (central connector)W0400037 01352LTS Hand torch complete with 12 mts cable (central connector)W0300140 04241/S Air and power cable 6 mts 1/8"W'0300141 04251/S Air and power cable 12 mts 1/8"

LT-150 Suitable for: CEBORA® P150 - CP160

ref. Catalog # Description1576 04051LTS Hand torch complete with 6 mts cable (central connector)1578 04151LTS Hand torch complete with 12 mts cable (central connector)1226 04053LTS Hand torch CP-160 complete with 6 mts cable (central connector)1226.20 04153LTS Hand torch CP-160 complete with 12 mts cable (central connector)

04240/S Air and power cable 6 mts 1/8"04250/S Air and power cable 12 mts 1/8"

LLLLLTTTTT-T-T-T-T-Torororororccccchesheshesheshes

23



2013.10.A-LT-RPT

LT-81 Suitable for: TRAFIMET® A80 - Ergocut A81

ref. Catalog # DescriptionPA 170/1400/1404 06820LT Hand torch 6 mts. cable ( 3/8G connection )PA 1402 06821LT Hand torch 6 mts. cable ( central connector )PH 0130/0132 06880 Air and power cable 6 mts. ( 3/8G )

04270 End Fitting (1/4G )

LT-101 Suitable for: TRAFIMET® A90 - Ergocut 101

ref. Catalog # DescriptionPA 109/1450/1454 06050LT Hand torch complete with 6 mts. cable ( M14x1)PA 1452 06051LT Hand torch complete with 6 mts. cable ( central connector )PA 209 06150LT Hand torch complete with 12 mts. cable ( M14x1)

06151LT Hand torch complete with 12 mts. cable ( central connector )04224 Air and power cable 6 mts. (M14x1)04234 Air and power cable 12 mts. (M14x1) 04270 End Fitting (1/4G )

LT-141 Suitable for: TRAFIMET® A140 - Ergocut 141

ref. Catalog # DescriptionPA 101/1500/1502 06250LT Hand torch complete with 6 mts. cable ( M14x1)PA 1504 06251LT Hand torch complete with 6 mts. cable ( central connector )PA 102/1501 06350LT Hand torch complete with 12 mts. cable ( M14x1)PA 1505 06351LT Hand torch complete with 12 mts. cable ( central connector )

04220 Air and power cable 6 mts. (M14x1)04230 Air and power cable 12 mts. (M14x1)04270 End Fitting (1/4G )

LT-151 Suitable for: TRAFIMET® R145 - Ergocut A151

ref. Catalog # DescriptionPA 129/1550/1552 06920LTS Hand torch 6 mts. cable (M14x1)PA 1554 06921LTS Hand torch 6 mts. cable ( central connector )PA 130/1551 06930LTS Hand torch 12 mts. cable (M14x1)PA 1555 06931LTS Hand torch 12 mts. cable ( central connector )

04220/S Air and power cable 6 mts. ( M14x1)04230/S Air and power cable 12 mts. (M14x1)04270 End Fitting (1/4G )

LLLLLTTTTT-T-T-T-T-Torororororccccchesheshesheshes

Torches with different cable covers available on request.

Documents

PLASMA CUTTING13 60363 Doubel poni ted spacer 14 51970 Shield cup, hand (for extended tips 51102.09 and 51095/L) 15 51971 Spacer for contact cutting, hand (for extended tips 51102/S