Please be aware that this document remains available for

Please be aware that thisdocument remains available for

reference purposes only.This document is outdated and

therefore any prices orinformation within should not be

relied upon.

Tel: 01273 421321Fax: 01273 421322Automated sales:

0800 328 9435Email: [email protected]

http://www.m-p.co.ukMeadows & Passmore Ltd

Quality Clockmakers' SuppliesBarometer Parts and Materials

For our current pricelist,scan QR to the right or

click here:

For our current catalogue,scan QR code to the left

or click here:

M&PM&P

An up-to-date version of this document can be found here:

http://www.m-p.co.uk/current-catalogue.pdf http://www.m-p.co.uk/current-prices.pdf

http://www.m-p.co.uk/viewcat.htm

Tools

Meadows & Passmore Ltd. Brighton BN41 1EU Tel 01273 421321 Fax 01273 421322 11/1© M&P 2003

EXTERNAL MICROMETERSMoore & Wright micrometer withratchet & locking device.Range 0-25mm in 1/100ths of a mm.0377 002515

LATHE BELTINGFor driving lathes and small motor drives. Cut to length andhold ends onto a hot surface. Before the ring that formsbegins to burn, put the ends together centrally.Sold by the metre.2mm 0613 0012153mm 0613 0013154mm 0613 0014155mm 0613 0015156mm 0613 001615

with heat plates, satin chrome thimble and sleeve. Carbidetipped faces.Metric model 0-25mm graduated in 0.001mm0377 102515Imperial model 0-1" graduated in 0.0001"0377 000115

AUTOMATIC CENTRE PUNCHDelivers a sharp blow to the required point when presseddown. Spring pressure is adjustable fordifferent materials0446 000115

CIRCULAR GLASS CUTTERCuts both straight lines and circles up to250mm diameter. Spare cuttingwheels in handle.0418 000115

HAND TOOLS

PINVICEDouble ended pintongswith reversible chucks.Capacity 0 - 2.35mm0372 000115

CLOCK DIAL CUTTERAn ingenious tool for cuttingcircles in card from 11/16" -19 1/4" diameter.Cutter complete0386 000115Spare blades0386 000215

400 DAY BEAT SET TOOLFor final adjustments to thebeat without loosening theretainer.0595 040015

POCKET SCRIBERSPocket scribers for markingwatches and clocks afterrepairs and general scribing.Steel tip 0689 000115Diamond 0689 000215

MAINSPRING CLAMPSPair of clamps for holding loopended springs whilst working onmovements. The loop ended springbehaves just as if it was held in abarrel. Suitable for most 8 dayAmerican clocks.0249 000215

CENTRE FIXING NUT KEYAdjustable key for centre fixingnuts on modern clocks. Suitable forslots.0435 000115

ENGINEERS SQUARE4" square with solid steel stock.0921 000115

NYLON VERNIER GAUGE

in durable nylon. Accurate to 1/10th mm.0419 000115STAINLESS STEEL VERNIERA pair of lower priced but

accurate Draper micrometers foreveryday use. Enamelled frame

MOVEMENT CLAMPSSet of three robust clamps to support amovement while being dismantled. Plus ahanger to assist regulating.0416 000315

An accurate vernier witheasy-to-read dialmeasurement. Swiss made,

and optional earpiece. 90mm x 140mm x 45mm high.0969 000115Replacement pickup0969 0002159v battery0349 000915

ticks to help you set a clock in beat,even in a crowded or noisy room.Simply fix the crocodile clip to anypart of the movement. Even the handshaft! Complete with integral speaker

BEAT AMPLIFIERA battery operated beat amplifier with bothmechanical and quartz pickups. This will amplify the

reading to 0.001" and 1/50mm.Fine adjustment reading. Range6" and 150mm.0419 000215

COMPASS CUTTERFor cutting card dials 10-150mmin diameter.Includes spare blades.0386 000315

Not available

£17.95 8 P&P units

£19.98 9 P&P units

£15.98 25 P&P units

£38.50 25 P&P units £10.20 12 P&P units

£6.25 5 P&P units £4.98 8 P&P units

£12.60 8 P&P units

£4.95 7 P&P units

£3.24 5 P&P units

£4.20 3 P&P units £3.90 1 P&P unit

£12.80 10 P&P units

£30.90 25 P&P units

£7.20 1 P&P unit

£13.40 9 P&P units

£1.10 3 P&P units

£16.50 8 P&P units

£4.40 1 P&P unit

£2.40 1 P&P unit

£2.40 1 P&P unit

£2.40 1 P&P unit

£2.95 1 P&P unit

£3.45 1 P&P unit

£5.95 2 P&P units

Meadows & Passmore Ltd. Brighton BN41 1EU Tel 01273 421321 Fax 01273 421322

Tools

11/2 © M&P 2003

DOUBLE ENDED PIVOT FILE AND BURNISHERExcellent for fineclock pivots.Left hand 0375 000215Right hand 0375 000315

KEY SIZING GAUGEEliminates guesswork when ordering orusing up old keys. Solid constructionwith sizes from 1.75mm - 6.00mm.0638 000115

SET OF 6 NEEDLE FILESIn plastic wallet. High qualityneedle files, 14cm long, cut 2.0382 000815

EYEGLASS3 1/2" focal length (2.8x) glass lensin non-reflective body.0371 003515

HAND TOOLS

PIERCING SAW FRAMEMetal saw with woodenhandle. Unadjustable.0421 000115

DIAMOND COATED BULLS FOOT FILEWith a pad of industrial diamond as the abrasive.The only practical way to remove surplusmaterial from a platewithout marking the surrounding material.Steel construction. Its 1/8" shaft will fit ourwooden handle.File 0384 000215Handle 0692 000315

MINIATURE NEEDLE FILESFor use on seconds hands etc. 3" long.Round 0606 000115Square 0606 000215

NEEDLE FILE HOLDERSSprung typeSpring loaded file holder will grip files andtools tightly. Capacity 3-4mm.0383 000115

Chuck typeScrew chuck file holder. Capacity 2-4mm.0383 000215

EYEGLASS WITH SPECTACLE CLIP3 1/2" focal length (2.8x) glass lens in non-reflective body and spectacle frame clip.Fits all types of frame.0371 103515

TORX COMPATIBLE SCREWDRIVERSPlastic handled screwdrivers with hardened tips.Tip Size Part number6 1.67 1025 0006157 1.99 1025 0007158 2.31 1025 0008159 2.50 1025 00091510 2.74 1025 00101515 3.27 1025 001515

SWISS PIERCING SAW BLADESPacks of 12 high quality blades. Pitch is teeth/cm.Pitch mm Part number32 0.18 0421 00181523.5 0.24 0421 00241519 0.30 0421 00301515 0.38 0421 00381511 0.50 0421 005015

screwdrivers that grip the screws whilst being placed inawkward situations. Sold as a pair.0385 000315

SCREW-HOLDINGSCREWDRIVER SETPlain slot and cross-point

WATCHMAKERS SCREWDRIVERSSet of six small plain slot screwdrivers ofquality.0379 000615

Individual cross-point screwdrivers forremoving backs from watches, calculators etc.Diameter Part number1.5mm 0964 0150152.0mm 0964 0200152.5mm 0964 025015

For work onyour LEFThand sideor beneath workon your right.

For work on yourRIGHT hand sideor beneath work onyour left.

WOODEN FILE HANDLESWith small hole for most needlefiles and other general use. Canbe used for broaches etc.

3” 0692 0003154” 0692 0004155” 0692 000515

Sets of assorted economy needle files.6 files 0382 10061512 files 1103 001215

INSPECTION MIRRORFor those hard to get toplaces. Plain mirror.Plastic 0596 000115

Quality steel mirrorsFixed 0596 000215Adjustable 0596 000315

£16.25 10 P&P units

£0.80 5 P&P units

£3.98 6 P&P units £0.95 5 P&P units

£6.98 12 P&P units £1.05 5 P&P units

£10.90 6 P&P units

£9.95 1 P&P unit

£0.80 5 P&P units

£2.08 6 P&P units

£8.20 1 P&P unit

£8.50 1 P&P unit

£26.90 8 P&P units

£27.40 8 P&P units

£3.90 5 P&P units

£3.60 5 P&P units

£4.90 7 P&P units

£17.00 4 P&P units

£4.44 12 P&P units

£14.90 18 P&P units

£9.90 18 P&P units

£1.95 1 P&P unit

£1.95 1 P&P unit

£1.95 1 P&P unit

£1.95 1 P&P unit £2.90 1 P&P unit

£1.95 1 P&P unit £3.30 1 P&P unit

£3.60 1 P&P unit

£3.60 5 P&P units

£2.40 2 P&P units

£2.40 2 P&P units

£2.40 2 P&P units

£2.40 2 P&P units

£3.30 2 P&P units

£3.90 10 P&P units Not available

2+10%

3+20%

Tools


20 4.08 100 0547 04081518 4.26 100 0547 04261516 4.44 100 0547 04441514 4.57 100 0547 04571512 4.70 100 0547 04701510 4.85 105 0547 0485158 5.00 105 0547 0500156 5.10 105 0547 0510154 5.25 105 0547 0525152 5.56 105 0547 055615A 5.94 105 0547 059415B 6.04 110 0547 060415C 6.14 110 0547 061415D 6.24 110 0547 062415E 6.35 110 0547 063515F 6.52 110 0547 065215G 6.62 115 0547 066215H 6.75 120 0547 067515I 6.90 120 0547 069015J 7.03 120 0547 070315K 7.13 120 0547 071315L 7.36 120 0547 073615M 7.49 120 0547 074915N 7.67 120 0547 076715O 8.02 125 0547 080215P 8.20 125 0547 082015Q 8.43 125 0547 084315R 8.61 130 0547 086115S 8.83 130 0547 088315T 9.09 130 0547 090915U 9.34 130 0547 093415V 9.57 130 0547 095715W 9.80 130 0547 098015X 10.08 135 0547 100815Y 10.26 135 0547 102615Z 10.48 135 0547 104815

CUTTING BROACHES5 sided cuttingbroaches, inStubbs wire gauge at about 10mm from the shoulder. Metricequivalents are approximate. 0.01 mm taper (the diameterdecreases 1mm per 100mm of length).No. Size Length Part number80 0.33 31 0547 00331578 0.38 31 0547 00381576 0.45 36 0547 00451574 0.55 40 0547 00551572 0.61 40 0547 00611570 0.68 40 0547 00681568 0.76 44 0547 00761566 0.81 44 0547 00811564 0.88 48 0547 00881562 0.94 48 0547 00941560 1.00 48 0547 01001558 1.04 52 0547 01041556 1.14 52 0547 01141554 1.39 56 0547 01391552 1.60 62 0547 01601550 1.75 62 0547 01751548 1.90 65 0547 01901546 2.00 70 0547 02001544 2.15 70 0547 02151542 2.33 75 0547 02331540 2.46 75 0547 02461538 2.56 75 0547 02561536 2.69 80 0547 02691534 2.79 80 0547 02791532 2.92 83 0547 02921530 3.22 86 0547 03221528 3.53 90 0547 03531526 3.70 95 0547 03701524 3.83 95 0547 03831522 3.98 95 0547 039815

CUTTING BROACH ASSORTMENTSAssortments of 12 of the above broaches, bygauge.Even gauge numbers.34 - 56 0381 34561558 - 80 0381 588015

SMOOTHING BROACHESAssortments of 12smoothing broaches to achieve an excellent finish. Evengauge numbers.34 - 56 0702 34561558 - 80 0702 588015

BURR REMOVERHollow centred, with four cutting edges. Insert a pin tolocate the cutter when removing excess bushing.0373 000115

BROACHES & CUTTERS

Which broaches to buy?Our Bergeon bush list shows the internal and externaldiameters. The clocks you specialise in will often needbushing in the same places, and will use similar bushes.The outside diameters rise in regular steps so selectbroaches just larger than the bushes you use.The assortments should cover most internal adjustments.

ROLLER CUTTERS OR SINKERSSet of 6 double ended roller cutters,to create oil sinks in freshly inserted bushes.0374 000615 FLAT CLOCKMAKERS STAKES

Round stake with 9 holes.0757 000115Rectangular stake with 36 holes0757 000215Adjustable brass split stake with 9 holes.0757 000315

STAKE HOLDERFor perpendicular use of broaches,cutters etc. Hole o/d 4.7mm0788 000115

UNIVERSAL STAKESteel bench stake with numerous holes,slots & grooves for rivetting etc.40mm x 40mm x 40mm.0594 404015

Measured here: Not available

£3.90 1 P&P unit

£3.90 1 P&P unit

Not available

£4.60 1 P&P unit

Not available

£5.20 1 P&P unit

£1.20 1 P&P unit £5.20 1 P&P unit

£1.20 1 P&P unit £5.20 1 P&P unit

£1.20 1 P&P unit £5.20 1 P&P unit

£1.20 1 P&P unit £4.30 1 P&P unit

£1.20 1 P&P unit Not available

£1.20 1 P&P unit £4.20 1 P&P unit


£1.20 1 P&P unit £5.40 1 P&P unit



£1.20 1 P&P unit £5.90 1 P&P unit

£1.20 1 P&P unit £5.90 1 P&P unit


£1.20 1 P&P unit £6.40 1 P&P unit

£1.20 1 P&P unit £6.40 1 P&P unit

Not available Not available

£1.80 1 P&P unit £6.90 1 P&P unit

£1.80 1 P&P unit £7.20 1 P&P unit

£1.80 1 P&P unit £7.20 1 P&P unit

£2.10 1 P&P unit £7.60 1 P&P unit

£2.10 1 P&P unit £8.20 1 P&P unit

£2.10 1 P&P unit £8.90 1 P&P unit


Not available £9.20 1 P&P unit

£2.90 1 P&P unit £9.25 1 P&P unit

£2.90 1 P&P unit £9.90 1 P&P unit


£3.60 1 P&P unit £11.30 1 P&P unit


£3.60 1 P&P unit

£13.30 1 P&P unit £14.70 1 P&P unit

£9.10 1 P&P unit £9.80 1 P&P unit

Not available

£76.80 90 P&P units

£33.20 7 P&P units

£6.20 10 P&P units

£6.20 10 P&P units

£18.40 1 P&P unit

£8.20 10 P&P units


Tools

11/4 © M&P 2003

OUTFITS

BERGEON MAINSPRING WINDERThis cast iron frame that fits in a bench vice is one of the few winders that can be consideredsuitable for inserting large springs to the left or right with safety and ease. The boxed kit comeswith 2 cranks and 8 barrels. A 9th barrel is also available for giant springs.18, 25, 30, 35, 40, 48, 57 & 65mm barrels are included.Winder complete with box:0714 000115Optional extra:85mm barrel 0714 008515

MAINSPRING WINDER FOR HOLE & LOOP-END SPRINGSCast frame with chuck to hold your winding arbors from 2.5 - 5mm.Supplied complete with 10 barrels ranging from 7/8" to 2 3/8" internaldiameter and holders for both hole and loop-ended springs.0769 000115

Spare partsRatchet spring 0769 000215Pair of hooks 0769 000315Set of 10 barrels 0769 001015

DEPTHING TOOLA well designed buteconomical tool. Includestwo pairs of runners and allparts needed to depth wheelsand pinions and check escapements. Max. opening betweenrunners 125mm. Max. pivot length 95mm. Body 185mmlong, 95mm high and 70mm deep when closed. Completewith a pair of cones and trumpets.0947 000115

GEAR CUTTERS by Bergeon-TechnoliThis range of 26 cutters enables you to cut anywheel with 25 or more teeth to any module. Fullinstructions with every set. Also available inreduced sets of 16 of the most popular. Sets areavailable for both round and flat bottom teeth.Full sets:Round 0715 000115Flat 0715 000215Reduced sets:Round 0715 000315Flat 0715 000415

Chucks for holding wheels to be cut in lathessuch as Bergeon, Boley, Star, Favorite etc.For cutters up to 3mm thick0716 000315For cutters up to 5mm thick0716 000515

The above winders have barrels to hold the springs. Any winder requiring the operator to grip the fully wound spring withpliers to insert it should be used with extreme caution. We recommend the use of strong leather gloves with all types ofwinder. Please see the index.

CLOCKMAKERS' INTERNET FORUMIf you have access to the internet, pay a visit ourForum. You can place questions, ask for help withvaluations and technical problems, and placeclassified adverts free of charge.You don't need to be a customer to use it. It's opento all involved in the repair, restoration or collectingof clocks and barometers.www.m-p.co.uk

OUR AUTOMATED CREDIT

CARD SALES LINE GIVES

YOU...Same day despatch*..................Free postage & packing**........Free 0800 phone call .................24 hour operation .....................Price & availability info ...........Technical data ...........................Details on recent orders ..........

*Call before 3pm on weekdays for same day despatch. **Free postage onlyapplies to UK orders, and not to heavy or bulky items such as books, fluids,domes etc. or very low value orders. Cannot be used in addition to otherspecial discounts.

£395.00 432 P&P units

£64.60 20 P&P units

£110.00 160 P&P units

£2.90 1 P&P unit

£9.90 1 P&P unit

£32.90 20 P&P units

£1095.0 35 P&P units

£1095.0 35 P&P units

£129.50 140 P&P units

£685.00 35 P&P units

£685.00 35 P&P units

£35.00 5 P&P units

£35.00 5 P&P units

Tools


BERGEON CLOCK BUSHING OUTFITAlthough it's quite possible to fit bushes by hand, this bushing tool enables you to fit a new bushquickly, easily and above all, accurately. When a pivot wears its hole, it generally wears it intoan elongated one. It is vital to get the replacement bush centered on the original position. Thisrobust tool is ideal for the job.Suitable for bushing plates from 50 - 220mm with a pillar height of 70mm. The tool is availableas the full outfit, or as a reduced set to make it more affordable for the smaller workshop.Both sets include main tool with 2 arms & 2 chucks. and 1 broach with hand wheelThe full set includes a wooden box containing:3 driving punches, 1 centering bit, 1 undrilled stake, 4 drilled stakes, 2 centering stakes, 10reamers, 2 chamfering tools, 5 pivot cutters & 1 jacobs chuck.The reduced set includes a cardboard box containing:3 driving punches, 1 centering bit, 1 undrilled stake, 4 drilled stakes, 1 centering stake, 10 reamersand 1 chamfering tool.

BERGEON STAKING OUTFITThis useful set can be used both on its own and also forms a most useful accessoryfor the Bergeon Bushing tool.Kit contains 24 punches. 6 flat and six convex hollow, 5 round solid, 7 pumppunches, 1 large stake, 1 punch holder and 4 hollow stakes.0717 000115

BERGEON OUTFITS

Brief instructions on use:Fit a stake in base and secure the clock plate between the chucks. Fit centering point no. 6 in the broach. Locate the position ofthe original hole and tighten. Remove the point and fit a reamer corresponding to the size of bush to fit. Slowly turn the flywheel,lifting from time to time to clear any swarf.Remove the reamer and fit a punch slightly larger than the bush. Press down on the wheel to eliminate spring-back and tap lightlywith a brass hammer.Use the plates assembled to locate the correct point for bushing an oval hole using the centering stake. Full instructions are suppliedwith the tools.Full set 0605 000115Reduced set 0605 000215

Replacement reamers:1.20mm 0605 0120151.97mm 0605 0197152.47mm 0605 0247152.97mm 0605 0297153.47mm 0605 0347154.47mm 0605 0447155.47mm 0605 0547156.47mm 0605 0647157.47mm 0605 0747158.47mm 0605 084715

Tools not included in the reduced set but available separately:Chamfering tool 10mm 0605 001015Centering stake 16mm 4mm point 0605 001615Jacobs chuck 0605 002615Pivot cutter 2.20mm 0.40mm pivot 0605 100215Pivot cutter 3.00mm 0.70mm pivot 0605 100315Pivot cutter 5.00mm 1.50mm pivot 0605 100515Pivot cutter 6.00mm 3.00mm pivot 0605 100615Pivot cutter 9.00mm 5.00mm pivot 0605 100915

KWM SIZED REAMER ASSORTMENTBoxed set containing sizes 1.78mm, 2.68mm, 4.66mm, 5.85mm & 8.64mm0605 000415

FRENCH SIZED REAMER ASSORTMENTBoxed set containing sizes 3.97mm, 4.97mm, 5.97mm, 6.97mm & 7.97mm0605 000515

£365.50 3999 P&P units

£245.50 2999 P&P units

£6.40 1 P&P unit

£6.50 1 P&P unit

£6.70 1 P&P unit

£6.80 1 P&P unit

£6.90 1 P&P unit

£7.40 1 P&P unit

£7.70 1 P&P unit

£8.10 1 P&P unit

£8.60 1 P&P unit

£9.10 1 P&P unit

£8.90 3 P&P units

£12.50 5 P&P units

£51.50 10 P&P units

£11.40 3 P&P units

£12.40 3 P&P units

£12.60 3 P&P units

£12.80 3 P&P units

£13.80 5 P&P units

£59.60 7 P&P units

£59.60 7 P&P units

£230.00 200 P&P units


Tools

11/6 © M&P 2003

ULTRA JEWELLERY CLEANING MACHINEUsing vibration, this small electronic cleaningmachine is ideal for jewellery, spectacles, opticalequipment, small clock and engineering parts etc.240v.

Includes 2 plastic baskets and transparent lid. Intendedfor use with water based cleaners.

Tank capacity 600ml. Complete with 250ml ofconcentrated cleaning solution.190 x 100 x 100mm high.Cleaning machine 0970 000315250mm concentrate 0970 000415

ULTRASONIC CLEANING TANKManufactured in the U.K by Walkers, who have over 35 years expertise in thefield. Model 80T is best suited to the low volume user who needs a good sizedtank. Its stainless steel & aluminium construction means that it will withstandthe cleaning fluids used by the clock trade. Cheaper plastic cased machinescan quickly get damaged by the drips of fluid that inevitably drop on the case.Ultrasonic Cleaners function by generating powerful sound waves in thefluid. Dirt is dislodged by this rapid movement, and you can see thecontamination and grime literally being pulled away from the movement.Many modern movements can be cleaned without the need for dismantling,because the dirt is drawn out of the tiniest places. The speed and efficiencyof cleaning using these units, even when the clock has been dismantled andput in a wire basket (optional) is amazing.

Broad tip pen 0620 000115Fine tip pen 0620 000215UV handlamp 0620 000315Replacementtube 0620 000415Scriber 0689 000115R6 battery (x4) 0349 040715

ULTRA-VIOLET MARKINGA large proportion of burglaries involve antiques, jewellery, clocks and other such items. Manyof the articles recovered by the police are never traced to their rightful owners, and yet all the policeforces in the country have access to ultra-violet lamps toshow up postcode marking.A sensible way of protecting property is by postcodemarking, in addition to any photographic recording youmay do. Likewise, the use of lamps by antique dealers canserve as a double check on vendor's claims.The range of products available to protect your valuableproperty includes the UV detector lamp, fine tipped UVfelt pen and broad tipped UV felt tip marker, plus scriber.The scriber is particularly useful on metal objects such assilver, where ordinary markings would be polished off.Takes 4 x AA batteries (not included).

Opticians, dentists and jewellers also use these machines by filling them with more gentle water based solutions.After cleaning in specialist cleaners such as Horotech, the item should be rinsed in a suitable rinse. There is noneed to use rinse in the tank. Busy workshops maintain more than one rinse bath. By initially rinsing in lastmonth's old rinse, contamination of the final rinse is minimised. An old saucepan with a lid makes a good rinsebath in the amateur workshop!

Specifications:4.7 litre capacity, 300x151x150mm deep internal.PZT transducers. Lid included. 240v. Timer.Automatic heating. No drain tap because ultrasonics eventually damage the weld, causing leaks.0713 000115

£21.50 100 P&P units

£3.60 50 P&P units

£375.00 550 P&P units

£1.90 1 P&P unit

£1.90 1 P&P unit

£24.60 15 P&P units

£8.90 21 P&P units

£3.24 5 P&P units

£1.30 6 P&P units

Tools


MINIATURE ANVILSSteelVice anvil0753 000115

3 1/2" long bench anvil.0753 000215

WATCH OILER SETSet of oilers with plastic handles. Excellent for applyingsmall but precise quantities of oil.0592 000115

BENCH VICESmooth jawed bench vice with 1 1/4"jaws. Anvil at rear for riveting.0593 000115

BLACK BRISTLE BRUSHESWooden handles, with pure blackbristles.4 rows 0597 0004026 rows 0597 000602

WASHING OUT BRUSHBone handle with 4 rows of bristles.Resistant to almost any solvent.0599 000415

OILERS & BRUSHES

CLOCKMAKERS HAMMERSSteel heads with wooden handles.Weight is hammer head.Weight Part numberRound:45gms 0754 00451555gms 0754 005515Square:100gms 1034 010015200gms 1034 020015

DUST BLOWER4" dust blower with non-return valve.0756 000115

STEEL RULER12" steel ruler with metricand inches permanentlyetched into the surface.0766 001215

HAND REMOVERScrew action hand remover that will not damagethe dial. Ideal for drum movements etc. Aprecision tool, not a cheap imitation.0378 000115

'GLASGOW' WHITE BRISTLE BRUSHESWith excellent quality hardwood handles and natural bris-tles.

Extra-soft 0598 000115Soft 0598 000215Semi-hard 0598 000315Hard 0598 000415Extra-hard 0598 000515

AUTOMATIC OILEROil is automatically releasedwhen pressure is applied to thetip of this disposable 'pen' oiler.Filled with quality Swiss oil..0591 000215

BRASS SCRATCH BRUSHStandard brush with four rows0600 000115With 6 rows of extra hard brass 'bristles'.0600 000615

ROTARY HOLE PUNCHFor making holes in leather, plastic etc.0922 000115

TOOL CLAMPAn excellent parallel jawedclamp with almost infinite usesin the workshop.2" long jaws.0752 020015

PIN HAMMER4oz. cross pein pin hammerwith drop forged and hardenedhead.0768 000415

SPIRIT LAMPHeavy glass base for safety. Safety cap.Ideal for re-waxing silvered dials.0485 000115Spare wicks0485 000615

GLASSFIBRE SCRATCH PENCILPropelling type scratch brush for removing rust andscratches.Pencil 0658 00011512 refills 0658 001215

£16.60 249 P&P units

£3.40 20 P&P units

£3.20 20 P&P units

£3.20 20 P&P units

£3.20 20 P&P units

£5.90 1 P&P unit £3.20 20 P&P units

£7.20 1 P&P unit £2.90 20 P&P units

£3.60 20 P&P units

£5.90 1 P&P unit £4.65 5 P&P units

£4.80 25 P&P units £4.80 1 P&P unit

£5.40 1 P&P unit

£1.30 1 P&P unit

£3.76 20 P&P units

£7.24 19 P&P units

£5.20 20 P&P units

£3.20 5 P&P units

£5.10 3 P&P units

£7.90 25 P&P units £2.98 2 P&P units

£8.90 50 P&P units

£9.60 10 P&P units

£10.60 12 P&P units

Not available £5.74 15 P&P units

£7.40 20 P&P units

2+10%


Tools

11/8 © M&P 2003

INDUSTRIAL GLOVESProtect your skin from strongworkshop chemicals. PVCcoated.Medium 0770 000215Large 0770 000315

DISPOSABLE PLASTIC GLOVESPrevent fingermarking polished surfaceswith these simple gloves. Will also givesome protection against water-based fluidssuch as horolene. Because of the simpledesign one size fits all hands.100 Gloves 0771 010015

MACHINERY, SAFETY & SECURITY

LET DOWN KEYSSet of six double-ended steel keys witha plastic handle for letting down thepower of wound mainsprings safely.Sizes 1-8, 10, 12, 14 & 16.0774 000115

Butterfly type that fits over most kindsof butterfly clockkey (often with a littlemodification). Only use steel keys!Handle plus one double ended keyholder.0774 000215

STRONG LEATHER GLOVESProtect your hands against the cutsand bruises associated with clockmainsprings, and from sparkswhilst grinding or cutting.Made from tough leather.

Loose fit 0772 000315

SAFETY SPECTACLESProtect your eyes when usingmachinery or fluids which, ifsplashed, could ruin your eyesight.Can be used over spectacles. Made from impact resistantpolycarbonate to BS. 2092, Grade 2, giving clear distortionfree viewing.0773 000115

COTTON GLOVES12 Pairs of disposable cotton gloves toprevent fingermarks on polishedsurfaces etc.1032 000115

PIVOT LOCATORAn excellent tool for

BOX OF 100 LATEX GLOVES100% pure latex gloves, starchpowdered for easy pull on.Ambidextrous fit. One size. Handydispenser carton.1176 010015DUST MASKS

Pack of 5 masks for protection against nontoxic dusts and powders. NOT ARESPIRATORY PROTECTIVE DEVICE,and unsuitable for fine particles, vapour etc.1174 000515

Pack of 10 lightweight masks for protectionagainst fine toxic dust, fibres and aqueousmists. Protection level 10 x OEL. Conformsto EN149-FFP2(S)1174 001015

SAFETY GOGGLESSoft lightweight frameincorporating direct ventillation,soft face flange and spectaclerecess. Polycarbonate lens. Ideal for potentially hazardousjobs involving a risk of eye injury.1175 000115

aligning pivots with their holes duringassembly. 7" long.0755 000115

BOX OF 100 NITRILE GLOVESDisposable gloves that withstand most spiritbased cleaning solutions such as Horotech.

1410 010015

The Ke Supplierto Clockmakers

£2.32 10 P&P units

£2.32 10 P&P units £35.90 25 P&P units

£3.30 10 P&P units £15.70 5 P&P units

£4.20 15 P&P units £4.50 5 P&P units

£7.90 18 P&P units

£4.72 10 P&P units

£8.40 75 P&P units

£8.14 75 P&P units

£1.68 6 P&P units

£2.90 3 P&P units

£20.40 10 P&P units

3+25%

3+25%

Tools


TWEEZERS & PLIERS

Needle nosed, smooth jaw for afirm grip in very awkward places.0941 000215

PLIERSGood quality pliers suitable for all types of clock work. Allcutting pliers are suitable for cutting small gauge hard wire.

Side cutting 0443 000115

End cutting 0442 000115

End cutting, for galvanised wire line,piano wire etc. Very strong design.0442 000215

Flat nosed, with strong smooth jaws.0433 000115

'AA' are standard clocktweezers. 'P' have extrastrong tips.

Round blunt nosed, smooth jaw for a firmgrip in awkward places0941 000115

Flat nosed, with delicate smooth jawsideal for fine adjustments etc.0433 000215

PLASTIC TWEEZERSA pair of nylon tweezers forhandling watch batteries and forworking on quartz movements ingeneral. 125mm long, with serrated jaws and fine tips for asecure grip.0380 000515

Flat nosed, with delicate smooth jaws with aright-angled tip. Ideal for fine adjustmentsinside an assembled movement etc.0433 000315

STAINLESS TWEEZERSNot the extremely highquality of Swiss watchfactory standard, but verygood value for money.Quality stainless material.'AA' style 0380 000215'P' style 0380 000315

Giant clockmakers tweezersfor moving and locatinglarge parts without touchingthem. 165mm long.0380 000415

MAGNIFYING TWEEZERSCombined eyeglass and stainlesssteel tweezers.

Easily adjusted for best focus.1096 000115

EXTRA-LARGE STAINLESS PLIERSLong nosed serratedjaw pliers. Box jointedstainless steel.200mm total length.

1097 000115STEEL TWEEZERSSatin finish with plastic coatedends. 255mm long.

0380 025515

StarBuy

STAR BUYSWhere you see the 'star', just order at leastthe quantity shown of the same item, and getthat discount off the price.

£9.95 10 P&P units

£9.95 8 P&P units

£12.75 8 P&P units

£16.06 8 P&P units

£23.70 12 P&P units Not available

£11.70 8 P&P units £9.95 8 P&P units

£3.90 1 P&P unit

£9.95 1 P&P unit

£5.90 5 P&P units

£0.80 1 P&P unit

£4.60 1 P&P unit

£3.90 1 P&P unit

£4.50 5 P&P units


Tools

11/10 © M&P 2003

GAS SOLDERINGTORCHESCompact pen torches capable ofreaching 1300C. Very easy touse with adjustable flame etc.Uses domestic gas lighter fuel.

Small model, suitable fordelicate work. Up to 40 minsper charge.0690 000215

Large model, for heavier work,even small plumbing repairs!Complete with soldering tip.0690 000315

MICRO GAS TORCHAutomatic ignition using ordinary lighterrefill. Flame temperature of 1300C. Size85 x 145 x 46mm.Runs up to 1 hour on one fill of gas!Free standing or hand held, this is anexcellent and economical torch forjewellery, clocks and model engineering.Re-introduced due to customerdemand!

0690 000115

GAS TORCHES

VICE WITH VACUUM SUCTION BASEIdeal for smaller bench or table top tasks.A. Removable soft rubber jaw covers.B. Precision machined slide rods assure equally applied jaw pressure.C. Multi-positional ball swivel.D. Powerful suction base. To work satisfactorily, it must be used on asmooth flat laminated surface or on a plastic surface such as that used onkitchen worktops.3" Jaws

1016 000115

MOVEMENT STANDCast iron stand or ‘horse’for testing movements.Adjustable feet, with twosturdy brackets to holdmovement plates.Can be used over the edgeof a table when testingwallclocks with longpendulums.0978 000115

ESCAPE WHEEL TOOTH STRAIGHTENERStraighten and align the teeth on escape wheelseasily and quickly with this ingenious tool. Bent ordeformed teeth can be put back where they belong.

Locate the wheel in the tool, set the jaws to suit theangle of a correct tooth and then adjust each one inturn.

Supplied with full instructions, and can be used onany escape wheel from 400 day to Longcase.

0934 000115

AUTOMATED SALES FREEPHONEMost orders are sent postage free and despatched the same day if placed on our interactive order line.

0800 328 9435Please call our sales office on 01273 421321 if you don't know your customer number and pin.

PENDANT DRILLA versatile flexible shaft machine.1/8 HP ball bearig motor. Comeswith a jewelers handpiece, 39"flexible shaft, and variable speedfoot pedal. 0 to 18,000 RPM.

1161 000115

24 pce accesory kit on 2.4mmarbors for above.1161 002615

£10.00 5 P&P units

£30.90 25 P&P units

£19.98 7 P&P units

£179.50 450 P&P units

£49.85 251 P&P units

£25.75 25 P&P units

£33.00 190 P&P units

£150.50 58 P&P units

Tools


DEMAGNETISER240v Unit for tweezers,screwdrivers etc. Simply pressthe button and pass the itemthrough the magnetic field 110 x60 x 30mm high.1037 000115

ENGINEERS FILE SETSet of four second cut files.200mm.Supplied complete withpolypropylene handles withhang hole.Comprising hand, halfround, round and threesquare files.1102 000415

HELPING HAND BRACKETUseful bracket suitable for electronicwork, model and jewellery making.Complete with fully adjustableholding clips and a 50mm diametermagnifying lens (x 2.5magnification). The solid cast baseimproves stability.1171 000115

TELESCOPIC MAGNETIC PICK UP TOOLA fully extendable pick up tool with magnetic end. Idealfor the retrieval of nuts, screws and objects lost in remoteplaces.1172 000115

ENGRAVERBattery-powered diamond tippedengraver suitable for engravingmost surfaces including, glass,ceramics and metals. Belt-clipand 1.75M power lead. Runs off6 x AA type batteries (notsupplied).1105 000115

COTTON APRONHeavy duty cotton withneck loop, extra longwaist ties and large frontpocket. Packed inpolythene bag withdisplay card.

1173 000115

6 PIECE MEASURING SETUseful set of precisionmeasuring instruments.

1104 000615

ILLUMINATED MULTI-ANGLE MAGNIFIERPlastic illuminated magnifierwhich can be hand-held orsurface mounted. The handle canbe converted to a stand for use ona flat surface. When used as astand the magnifying head can tiltin four positions. Main lensmagnification x 2 with the inset x4. Uses 2 x AA batteries (notsupplied).1170 000115

SAMPLES CHARGEOur catalogue should provide customers with sufficientinformation to establish if an item is suitable. Wherefurther information would be helpful, please telephoneour sales department. We will be happy to provide asmuch technical information as we can, even if this is notavailable immediately. If any description in thecatalogue is clearly insufficient, inaccurate or evenmisleading, it is not our intention. Your assistance indrawing any discrepancies to our notice is welcomed.

Customers who cannot establish the suitability of astock item may order it on the basis that items not asanticipated may be returned unused for a refund.This must be done within 7 days and the sale numberquoted. Additional postage will be charged for anyalternative requested. No credit will be given for postageon items not as anticipated, which must arrive back in asalable condition.

Those customers who send a sample for us to matchagainst our stocks will normally incur a nominalsamples charge to cover some of the cost of the skilledlabour, insurance and handling involved. Thecharge depends upon the complexity of the problem,but will normally fall within our minimum of £2.50.Return postage and packing will be charged inaddition. We regret that this service is not available tocallers.

£24.60 25 P&P units

£5.00 38 P&P units

£3.94 5 P&P units

£13.98 82 P&P units

£12.98 14 P&P units £4.72 10 P&P units

£15.30 48 P&P units

£8.98 10 P&P units


Tools

11/12 © M&P 2003

TELEPHONE ORDERING is by far the quickest and most efficient method and sophisticatedtechnology enables our staff to give you up to date prices, availability etc. almost instantly.

Each customer is given a customer number when their catalogue is despatched and from this our staff canquickly verify your name and address.

Account customers who have paid to terms need only quote the part numbers and respective quantities ofthe items they require.

Credit & debit card holders will be asked each time for the number and expiry date. We also need to knowif the name and address stored in our system is that of the card holder. We are not permitted by the cardcompanies to process an order without asking for the card information each time, so please have your cardready.

To place a credit card order all you need to do is:

1 Ask to place a credit card orderThen give us:2 Your customer number (from your address label)3 Your card number, expiry date, last 3 digits on signature strip & issue number if shown.4 The cardholders name & address5 The part numbers followed by the quantities

To place an account order all you need to do is:

1 Ask to place an account orderThen give us:2 Your customer number (from your address label)3 The part numbers followed by the quantitiesTo open an account, a few simple formalities are required. A simple account application form is availableon request.

TELEPHONE ORDERING

Our sales staff take phone orders throughout the day, and it will assist them (and reduce your phonebill) if you have all the information to hand when you ring, and provide it in the sequence shown.URGENT ORDERS must be placed on our automated system before 15.00 hrs. GMT/BST

THE AUTOMATED SYSTEM - HOW DO I USE IT?Using your telephone keypad, simply dial 0800 328 9435 and select from the menu of options you willhear.You will need to identify yourself by keying in your customer number (not your old delivery point code)and your secret pin. If you don’t know these, please call during working hours and an operator will helpyou. Using your phone keypad, simply key in the part numbers or answers to the prompts. You’ll find thesystem easy to use, and extremely friendly. If you have any problems, our trained staff are on hand to helpyou during the working day.

Tips:Hash is the ‘#’ key under the 9.

Be prepared. Write down all the information you will need before you call.

Use a tone telephone. If you hear tones when you dial (not clicks) then you have a tone phone. Manytelephones have a switch to select DTMF tone dialling. A pulse telephone will not operate the system.

Write down the confirmation number. You will hear this when the order has been accepted.

Tools


PINIONSAll dimensions as ratios of the module. M millimetres BS 978 : part 2. As Swiss Standard NHS 56703 except for*

Number of leaves 6 7 8 10 12 16Pitch circle diameter 6 x M 7 x M 8 x M 10 x M 12 x M 16 x MOutside or Tip diameter (diameter of blank) 7.71 x M 8.71 x M 9.71 x M 11.61 x M 13.61 x M 17.61 x MRoot diameter* 2.5 x M 3.3 x M 4.2 x M 5.9 x M 7.8 x M 11.8 x MLeaf thickness 1.05 x M 1.05 x M 1.05 x M * 1.25 x M 1.25 x M 1.25 x MAddendum radius 1.05 x M 1.05 x M 1.05 x M 0.82 x M 0.82 x M 0.82 x M

Form of addendum Full Ogive , profile “C” 1/3 ogive, profile “B”(r = leaf thickness) (r = 2/3 of a leaf thickness)

Angle of cutter flank 20° 17°- 9' 15° 10° - 48' 9° 6°-45'Tooth/pitch ratio 1/3 1/3 1/3 2/5 2/5 2/5Addendum 0.855 x M 0.855 x M 0.855 x M 0.805 x M 0.805 x M 0.805 x MDedendum 1.75 x M 1.85 x M 1.90 x M 2.05 x M 2.10 x M 2.10 x MFull tooth depth (depth of feed) 2.605 x M 2.705 x M 2.755 x M 2.855 x M 2.905 x M 2.905 x MLength of cutting edge or profile for M. = 1.0 6.58 x M 6.90 x M 7.11 x M 7.38 x M 7.59 x M 7.75 x M

PROFILE DIMENSIONS FOR CLOCK & WATCH WHEEL & PINION CUTTERS

PINIONS SHOULD NEVER BE CUT DRY:A copious stream of cutting oil should be used to keep thecutter cool and remove the chips. (Mobilnet 745 orequivalent).

For cutting pinions for old work with thicker leaves, usecutter 0.05 module smaller than calculated. The addendumallowance is unchanged.

RECOMMENDED CUTTING SPEEDS:For cutting carbon steel pinions with high speed steelcutters:Cutter diameter 14 mm 430-500 rpmCutter diameter 20 mm 300-350 rpmCutter diameter 24 mm 250-290 rpmCutter diameter 26 mm 230-270 rpm

For cutting brass a speed of 3-400 rpm should be used.

CALCULATION OF THE MODULEModule M = Pitch circle diameter in mm (D) / No. of teeth in wheel or leaves in the pinion (N)Also M = Twice the centre distance in mm / Sum of teeth in wheel and pinion

CALCULATION OF BLANK DIAMETERBlank diameter = Module x (N + addendum allowance from table above).

Example: for a pinion of 6 leaves and a Module of 0.7,Blank diameter = 0.7 x (6 + 1.71) = 5.397 mm.

Note that this enables the module of a wheel or pinion to be found when the centre distance is not known.For Module M = Tip diameter / N + Addendum allowance.For odd pinions of say 7 leaves use a hole gauge to measure the tip diameter

WHEEL & PINION CUTTERS

Addendum

Dedendum1.57 x moduleup to andincluding M. 0.45

Dedendum2 x module

for M. 0.5 up to andincluding M. 1.0

CYCLOIDAL CLOCK & WATCH WHEEL & PINION CUTTERS

Table of addendum allowances

No. Ogive Ratio Add to numberof leaves Tooth of teeth

space or leaves

6 Full 1/2 1.717 Full 1/2 1.718 Full 1/2 1.7110 1/3 2/3 1.6112 1/3 2/3 1.6116 1/3 2/3 1.61

Wheel - 1/1 2.76

A range of finest quality cutters made from high speed steel hardened and treble tempered under vacuum. This steel, with ahardness circa 68 Rockwell C. maintains a good cutting edge which offers long periods between sharpenings.Brass for wheels should be hard or half-hard, with a typical composition of 61-64% copper, 1-2% lead and the balance zinc.Soft brass will clog the cutter.Steel for pinions should be free cutting silver steel with a typical composition including 1% Carbon, 0.55% Manganese and0.20% Selenium

Addendum

Pitch Diameter

Dedendum1.57 x moduleup to andincluding M. 0.45

Dedendum2 x module

for M. 0.5 up to andincluding M. 1.0

Blank Diameter


Tools

11/14 © M&P 2003

WHEELSAll dimensions as ratios of the module. M millimetres BS 978 : part 2. As Swiss Standard NHS 56702 except for*:Module M. Up to and including 0.5 and up to and Short Form

0.45, and 1.1 to 1.5 including 1.0 0.2 to 1.0Number of teeth N N NPitch circle diameter N.x M N x M N x MOutside or Tip diameter(diameter of blank) (N + 2.76) x M (N + 2.76) x M (N + 2.76) x MRoot diameter (N - 3.14) x M * (N - 4) x M (N - 2.14) x MTooth thickness 1.57 x M 1.57 x M 1.57 x MAddendum radius 1.93 x M 1.93 x M 1.93 x MAngle of cutter flank 2° 2° 2°Addendum 1.38 x M 1.38 x M 1.38 x MDedendum 1.57 x M * 2 x M 1.07 x MFull tooth depth (depth of feed) 2.95 x M 3.38 x M 2.45 x MLength of cutting edge or profile for M. = 1.0 8.18 x M 9.01 x M 7.18 x M

PINION CUTTERS - 6 LeavesM. D. O. T. Part No.0.20 127 14.0 2.00 1091 2006150.25 101.6 14.0 2.00 1091 2506150.30 84.7 14.0 2.00 1091 3006150.35 72.5 14.0 2.00 1091 3506150.40 63.5 25.0 3.25 1091 4006150.45 56.4 25.0 3.25 1091 4506150.50 50.8 25.0 3.25 1091 5006150.55 46.2 25.0 3.25 1091 5506150.60 42.3 25.0 3.25 1091 6006150.65 39.1 25.0 3.25 1091 6506150.70 36.3 25.0 3.25 1091 7006150.75 33.9 25.5 4.50 1091 7506150.80 31.8 25.5 4.50 1091 8006150.85 29.9 25.5 4.50 1091 8506150.90 28.2 25.5 4.50 1091 9006150.95 26.7 25.5 4.50 1091 9506151.00 25.4 25.5 4.50 1091 1006151.10 23.09 28.0 7.00 1091 1106151.20 21.16 28.0 7.00 1091 1206151.30 19.53 28.0 7.00 1091 1306151.40 18.14 28.0 7.00 1091 1406151.50 16.93 28.0 7.00 1091 150615

PINION CUTTERS - 7 LeavesM. D. O. T. Part No.0.20 127 14.0 2.00 1091 2007150.25 101.6 14.0 2.00 1091 2507150.30 84.7 14.0 2.00 1091 3007150.35 72.5 14.0 2.00 1091 3507150.40 63.5 25.0 3.25 1091 4007150.45 56.4 25.0 3.25 1091 4507150.50 50.8 25.0 3.25 1091 5007150.55 46.2 25.0 3.25 1091 5507150.60 42.3 25.0 3.25 1091 6007150.65 39.1 25.0 3.25 1091 6507150.70 36.3 25.0 3.25 1091 7007150.75 33.9 25.5 4.50 1091 7507150.80 31.8 25.5 4.50 1091 8007150.85 29.9 25.5 4.50 1091 850715

0.90 28.2 25.5 4.50 1091 9007150.95 26.7 25.5 4.50 1091 9507151.00 25.4 25.5 4.50 1091 1007151.10 23.09 28.0 7.00 1091 1107151.20 21.16 28.0 7.00 1091 1207151.30 19.53 28.0 7.00 1091 1307151.40 18.14 28.0 7.00 1091 1407151.50 16.93 28.0 7.00 1091 150715

PINION CUTTERS - 8 LeavesM. D. O. T. Part No.0.20 127 14.0 2.00 1091 2008150.25 101.6 14.0 2.00 1091 2508150.30 84.7 14.0 2.00 1091 3008150.35 72.5 14.0 2.00 1091 3508150.40 63.5 25.0 3.25 1091 4008150.45 56.4 25.0 3.25 1091 4508150.50 50.8 25.0 3.25 1091 5008150.55 46.2 25.0 3.25 1091 5508150.60 42.3 25.0 3.25 1091 6008150.65 39.1 25.0 3.25 1091 6508150.70 36.3 25.0 3.25 1091 7008150.75 33.9 25.5 4.50 1091 7508150.80 31.8 25.5 4.50 1091 8008150.85 29.9 25.5 4.50 1091 8508150.90 28.2 25.5 4.50 1091 9008150.95 26.7 25.5 4.50 1091 9508151.00 25.4 25.5 4.50 1091 1008151.10 23.09 28.0 7.00 1091 1108151.20 21.16 28.0 7.00 1091 1208151.30 19.53 28.0 7.00 1091 1308151.40 18.14 28.0 7.00 1091 1408151.50 16.93 28.0 7.00 1091 150815

PINION CUTTERS - 10 LeavesM. D. O. T. Part No.0.20 127 14.0 2.00 1091 2010150.25 101.6 14.0 2.00 1091 2510150.30 84.7 14.0 2.00 1091 3010150.35 72.5 14.0 2.00 1091 3510150.40 63.5 25.0 3.25 1091 4010150.45 56.4 25.0 3.25 1091 4510150.50 50.8 25.0 3.25 1091 5010150.55 46.2 25.0 3.25 1091 5510150.60 42.3 25.0 3.25 1091 6010150.65 39.1 25.0 3.25 1091 6510150.70 36.3 25.0 3.25 1091 701015

DETAILS OF RANGEM. : module in mm.D. : Diametral pitch in teeth / inch.O. : Outside diameter (nominal).T. : Thickness (mm).All cutters have 12 teeth and a Bore Diameter of 7.00 mmexcept pinion cutters with a modulus smaller than or equal to0.35 mm which have a bore diameter of 3.5 mm.

PINION CUTTERS - 7 Leaves (continued)M. D. O. T. Part No.


£57.00 1 P&P unit

£57.00 1 P&P unit

£57.00 1 P&P unit

£75.00 1 P&P unit

£75.00 1 P&P unit

£75.00 1 P&P unit

£75.00 1 P&P unit

£75.00 1 P&P unit

£57.00 1 P&P unit

£57.00 1 P&P unit

£57.00 1 P&P unit

£57.00 1 P&P unit £57.00 1 P&P unit

£57.00 1 P&P unit £57.00 1 P&P unit

£57.00 1 P&P unit £57.00 1 P&P unit

£57.00 1 P&P unit £57.00 1 P&P unit

£57.00 1 P&P unit £57.00 1 P&P unit

£57.00 1 P&P unit £57.00 1 P&P unit

£57.00 1 P&P unit £57.00 1 P&P unit

£57.00 1 P&P unit £57.00 1 P&P unit

£57.00 1 P&P unit £57.00 1 P&P unit

£57.00 1 P&P unit £57.00 1 P&P unit

£57.00 1 P&P unit £57.00 1 P&P unit

£57.00 1 P&P unit £57.00 1 P&P unit

£57.00 1 P&P unit £57.00 1 P&P unit

£57.00 1 P&P unit £57.00 1 P&P unit

£75.00 1 P&P unit £57.00 1 P&P unit

£75.00 1 P&P unit £57.00 1 P&P unit

£75.00 1 P&P unit £57.00 1 P&P unit

£75.00 1 P&P unit £75.00 1 P&P unit

£75.00 1 P&P unit £75.00 1 P&P unit

£75.00 1 P&P unit

£75.00 1 P&P unit

£75.00 1 P&P unit

£57.00 1 P&P unit

£57.00 1 P&P unit

£57.00 1 P&P unit

£57.00 1 P&P unit £57.00 1 P&P unit

£57.00 1 P&P unit £57.00 1 P&P unit

£57.00 1 P&P unit £57.00 1 P&P unit

£57.00 1 P&P unit £57.00 1 P&P unit

£38.50 1 P&P unit £57.00 1 P&P unit

£57.00 1 P&P unit £57.00 1 P&P unit

£57.00 1 P&P unit £57.00 1 P&P unit

£57.00 1 P&P unit £57.00 1 P&P unit

£57.00 1 P&P unit £57.00 1 P&P unit

£57.00 1 P&P unit £57.00 1 P&P unit

£38.50 1 P&P unit £57.00 1 P&P unit

Tools


0.75 33.9 25.5 4.501091 7510150.80 31.8 25.5 4.501091 8010150.85 29.9 25.5 4.501091 8510150.90 28.2 25.5 4.501091 9010150.95 26.7 25.5 4.501091 9510151.00 25.4 25.5 4.501091 1010151.10 23.09 28.0 7.001091 1110151.20 21.16 28.0 7.001091 1210151.30 19.53 28.0 7.001091 1310151.40 18.14 28.0 7.001091 1410151.50 16.93 28.0 7.001091 151015

PINION CUTTERS - 12 LeavesM. D. O. T. Part No.0.20 127 14.0 2.001091 2012150.25 101.6 14.0 2.001091 2512150.30 84.7 14.0 2.001091 3012150.35 72.5 14.0 2.001091 3512150.40 63.5 25.0 3.251091 4012150.45 56.4 25.0 3.251091 4512150.50 50.8 25.0 3.251091 5012150.55 46.2 25.0 3.251091 5512150.60 42.3 25.0 3.251091 6012150.65 39.1 25.0 3.251091 6512150.70 36.3 25.0 3.251091 7012150.75 33.9 25.5 4.501091 7512150.80 31.8 25.5 4.501091 8012150.85 29.9 25.5 4.501091 8512150.90 28.2 25.5 4.501091 9012150.95 26.7 25.5 4.501091 9512151.00 25.4 25.5 4.501091 1012151.10 23.09 28.0 7.001091 1112151.20 21.16 28.0 7.001091 1212151.30 19.53 28.0 7.001091 1312151.40 18.14 28.0 7.001091 1412151.50 16.93 28.0 7.001091 151215

PINION CUTTERS - 16 LeavesM. D. O. T. Part No.0.20 127 14.0 2.001091 2016150.25 101.6 14.0 2.001091 2516150.30 84.7 14.0 2.001091 3016150.35 72.5 14.0 2.001091 3516150.40 63.5 25.0 3.251091 4016150.45 56.4 25.0 3.251091 4516150.50 50.8 25.0 3.251091 5016150.55 46.2 25.0 3.251091 5516150.60 42.3 25.0 3.251091 6016150.65 39.1 25.0 3.251091 6516150.70 36.3 25.0 3.251091 7016150.75 33.9 25.5 4.501091 7516150.80 31.8 25.5 4.501091 8016150.85 29.9 25.5 4.501091 8516150.90 28.2 25.5 4.501091 9016150.95 26.7 25.5 4.501091 9516151.00 25.4 25.5 4.501091 1016151.10 23.09 28.0 7.001091 1116151.20 21.16 28.0 7.001091 1216151.30 19.53 28.0 7.001091 1316151.40 18.14 28.0 7.001091 1416151.50 16.93 28.0 7.001091 151615

WHEEL CUTTERS - "W"M. D. O. T. Part No.0.20 127 14.0 2.00 1091 2021150.25 101.6 14.0 2.00 1091 2521150.30 84.7 14.0 2.00 1091 3021150.35 72.5 14.0 2.00 1091 3521150.40 63.5 25.0 3.25 1091 4021150.45 56.4 25.0 3.25 1091 4521150.50 50.8 25.0 3.25 1091 5021150.55 46.2 25.0 3.25 1091 5521150.60 42.3 25.0 3.25 1091 6021150.65 39.1 25.0 3.25 1091 6521150.70 36.3 25.0 3.25 1091 7021150.75 33.9 25.5 4.50 1091 7521150.80 31.8 25.5 4.50 1091 8021150.85 29.9 25.5 4.50 1091 8521150.90 28.2 25.5 4.50 1091 9021150.95 26.7 25.5 4.50 1091 9521151.00 25.4 25.5 4.50 1091 1021151.10 23.09 28.0 7.00 1091 1121151.20 21.16 28.0 7.00 1091 1221151.30 19.53 28.0 7.00 1091 1321151.40 18.14 28.0 7.00 1091 1421151.50 16.93 28.0 7.00 1091 152115

WHEEL CUTTERS (20 TEETH AND ABOVE)SQUARE BOTTOM N.H.S. 56702

PINION CUTTERS - 10 Leaves (continued)M. D. O. T. Part No.

WHEEL CUTTERS - SHORT FORM "S"M. D. O. T. Part No.0.20 127 14.0 2.001091 2022150.25 101.6 14.0 2.001091 2522150.30 84.7 14.0 2.001091 3022150.35 72.5 14.0 2.001091 3522150.40 63.5 25.0 3.251091 4022150.45 56.4 25.0 3.251091 4522150.50 50.8 25.0 3.251091 5022150.55 46.2 25.0 3.251091 5522150.60 42.3 25.0 3.251091 6022150.65 39.1 25.0 3.251091 6522150.70 36.3 25.0 3.251091 7022150.75 33.9 25.5 4.501091 7522150.80 31.8 25.5 4.501091 8022150.85 29.9 25.5 4.501091 8522150.90 28.2 25.5 4.501091 9022150.95 26.7 25.5 4.501091 9522151.00 25.4 25.5 4.501091 102215

WHEEL CUTTERS (20 TEETH) AND ABOVEROUND BOTTOM - "R", N.H.S. 56704M. D. O. T. Part No.0.20 127 14.0 2.001091 2023150.25 101.6 14.0 2.001091 2523150.30 84.7 14.0 2.001091 3023150.35 72.5 14.0 2.001091 3523150.40 63.5 25.0 3.251091 4023150.45 56.4 25.0 3.251091 4523150.50 50.8 25.0 3.251091 5023150.55 46.2 25.0 3.251091 5523150.60 42.3 25.0 3.251091 6023150.65 39.1 25.0 3.251091 6523150.70 36.3 25.0 3.251091 7023150.75 33.9 25.5 4.501091 7523150.80 31.8 25.5 4.501091 802315


£57.00 1 P&P unit

£57.00 1 P&P unit

£57.00 1 P&P unit £57.00 1 P&P unit

£57.00 1 P&P unit £57.00 1 P&P unit

£57.00 1 P&P unit £57.00 1 P&P unit

£57.00 1 P&P unit £57.00 1 P&P unit

£75.00 1 P&P unit £57.00 1 P&P unit

£75.00 1 P&P unit £57.00 1 P&P unit

£75.00 1 P&P unit £57.00 1 P&P unit

£75.00 1 P&P unit £57.00 1 P&P unit

£75.00 1 P&P unit £57.00 1 P&P unit

£57.00 1 P&P unit

£57.00 1 P&P unit

£57.00 1 P&P unit

£57.00 1 P&P unit £57.00 1 P&P unit

£57.00 1 P&P unit £57.00 1 P&P unit

£57.00 1 P&P unit £57.00 1 P&P unit

£57.00 1 P&P unit £57.00 1 P&P unit

£57.00 1 P&P unit £57.00 1 P&P unit

£57.00 1 P&P unit £75.00 1 P&P unit

£57.00 1 P&P unit £75.00 1 P&P unit

£57.00 1 P&P unit £75.00 1 P&P unit

£57.00 1 P&P unit £75.00 1 P&P unit

£57.00 1 P&P unit £75.00 1 P&P unit

£57.00 1 P&P unit

£57.00 1 P&P unit

£57.00 1 P&P unit

£57.00 1 P&P unit £62.50 1 P&P unit

£57.00 1 P&P unit £62.50 1 P&P unit

£57.00 1 P&P unit £62.50 1 P&P unit

£57.00 1 P&P unit £62.50 1 P&P unit

£75.00 1 P&P unit £62.50 1 P&P unit

£75.00 1 P&P unit £62.50 1 P&P unit

£75.00 1 P&P unit £62.50 1 P&P unit

£75.00 1 P&P unit £62.50 1 P&P unit

£75.00 1 P&P unit £62.50 1 P&P unit

£62.50 1 P&P unit

£62.50 1 P&P unit

£62.50 1 P&P unit

£57.00 1 P&P unit £62.50 1 P&P unit

£57.00 1 P&P unit £62.50 1 P&P unit

£57.00 1 P&P unit £62.50 1 P&P unit

£57.00 1 P&P unit £62.50 1 P&P unit

£57.00 1 P&P unit £62.50 1 P&P unit

£57.00 1 P&P unit

£57.00 1 P&P unit

£57.00 1 P&P unit

£57.00 1 P&P unit

£57.00 1 P&P unit £57.00 1 P&P unit

£57.00 1 P&P unit £57.00 1 P&P unit

£57.00 1 P&P unit £57.00 1 P&P unit

£57.00 1 P&P unit £57.00 1 P&P unit

£57.00 1 P&P unit £57.00 1 P&P unit

£57.00 1 P&P unit £57.00 1 P&P unit

£38.50 1 P&P unit £57.00 1 P&P unit

£57.00 1 P&P unit £57.00 1 P&P unit

£75.00 1 P&P unit £57.00 1 P&P unit

£75.00 1 P&P unit £57.00 1 P&P unit

£75.00 1 P&P unit £57.00 1 P&P unit

£75.00 1 P&P unit £57.00 1 P&P unit

£75.00 1 P&P unit £57.00 1 P&P unit


Tools

11/16 © M&P 2003

0.85 29.9 25.5 4.501091 8523150.90 28.2 25.5 4.501091 9023150.95 26.7 25.5 4.501091 9523151.00 25.4 25.5 4.501091 102315

M. D. O. T. Part No.

A- RECOIL ESCAPE WHEEL CUTTERSDiameter 26mm.Bore 7.00mm.No. of teeth on cutter: 60.All dimensions in mm.

ESCAPE WHEEL & RATCHET CUTTERS (FINE TOOTH)

Size Radius Pitch less Thickness Outside No. of Part No.No. tooth tip nominal diameter teeth

thickness nominal1E 3.28 1.31 1.64 26.00 60 1150 3281152E 4.10 1.64 2.05 26.00 60 1150 4101153E 5.12 2.05 2.56 26.00 60 1150 5122154E 6.40 2.50 3.20 26.00 60 1150 6402155E 8.00 3.20 4.00 26.00 60 1150 8032156E 10.00 4.00 4.50 26.00 60 1150 1040157E 12.50 5.00 5.80 26.00 60 1150 122515

B- DEAD BEAT ESCAPE WHEEL CUTTERS

To calculate the escape wheel tooth pitch in order toselect the right cutter: multiply the tip diameter D by πthen divide by the number of teeth. Example: for a tipdiameter D = 1.375" and a No. of teeth N = 29; Pitch =3.142x1.375/29 = 0.148". Use cutter size B Dead Beat.

Size O/D Pitch less Thickness Diameter No. of Part No.letter of escape tooth tip nominal nominal teeth

wheel thickness

A 1.75 0.183 0.200 1.181 60 1151 175015B 1.42 0.148 0.162 1.181 60 1151 142015C 1.08 0.113 0.123 1.181 60 1151 108015D 0.75 0.078 0.086 1.181 60 1151 075015

C- RADIUSED TOOTH RATCHET CUTTERSDiameter 26 mm. No. of teeth on cutter: 60.

Radius Diameter Thickness Diameter No. of Part No.of ratchet Nominal teeth

4.00 8.00 2.70 20.00 60 1152 0408156.00 12.00 4.00 26.00 60 1152 0612159.00 18.00 6.00 26.00 60 1152 09181513.50 27.00 9.00 26.00 60 1152 132715All dimensions in mm.

D- STRAIGHT TOOTH RATCHET CUTTER

Angle Thickness Diameter No. of Part No.nominal teeth

60 ° 7.00 28.00 12 1153 60071570 ° 7.00 28.00 12 1153 700715All dimensions in mm

Diameter 28 mm. Bore 7.00 mm. No of teeth on cutter: 12. Angles of 60° and 70°.

E- MUSICAL BOX WORM WHEEL CUTTERDiameter 25 mm. Bore 7.00 mm. No. of teeth on cutter: 12

Size Standard Standard Max Max Tip width Outside No.of Part No.No. pitch depth pitch depth of cutter diameter teeth

Nominal00 0.63 0.52 0.80 0.89 0.20 25.00 12 1154 6352150 0.82 0.67 1.04 1.15 0.26 25.00 12 1154 8267151 1.10 0.90 1.40 1.55 0.35 25.00 12 1154 1109152 1.40 1.15 1.80 1.98 0.45 25.00 12 1154 1411153 1.80 1.47 2.30 2.54 0.57 25.00 12 1154 1814154 2.30 1.88 2.90 3.24 0.73 25.00 12 1154 231815

Diameter 30 mm. Bore 7.00 mm No. of teeth on cutter: 60. All dimensions in the table are in inches.

These cutters are designed for a 30 tooth escape wheel, but pitch and number of teeth may be varied up to about 9%.

All dimensions in the table are in mm.


£57.00 1 P&P unit

£57.00 1 P&P unit

£57.00 1 P&P unit

£57.00 1 P&P unit

£53.00 1 P&P unit

£53.00 1 P&P unit

£53.00 1 P&P unit

£53.00 1 P&P unit

£53.00 1 P&P unit

£53.00 1 P&P unit

£53.00 1 P&P unit

£53.00 1 P&P unit

£53.00 1 P&P unit

£53.00 1 P&P unit

£53.00 1 P&P unit

£53.00 1 P&P unit

£53.00 1 P&P unit

£53.00 1 P&P unit

£53.00 1 P&P unit

£57.00 1 P&P unit

£57.00 1 P&P unit

£57.00 1 P&P unit

£57.00 1 P&P unit

£57.00 1 P&P unit

£57.00 1 P&P unit

£57.00 1 P&P unit

£57.00 1 P&P unit

Documents

Please be aware that this document remains available for