Upload
buitu
View
245
Download
0
Embed Size (px)
Citation preview
Plenary Lectures of EMC and Pb-Zn Conference 2015 with General Interest for all Conference Participants
European Metallurgical Conference 2015 & Lead-Zinc 2015
Monday, June 15, 2015; 9.00 am
Prof. Dr. Walter Frenz, RWTH Aachen, Lehr-und Forschungsgebiet Berg-, Umwelt- und Europarecht, Germany
Information exchange in committees and conferences – infringements of competition
law?
Monday, June 15, 2015; 9.30 am
Professor Dr. Dr. h.c. Markus A. Reuter, Outotec Oyj, Finland
Lead and Zinc: Crucial Carrier Metals for a Sustainable Society
Monday, June 15, 2015; 10.00 am
Nick Hazen, Hazen Research, Inc., USA
A Discussion of Effective Process Development
Tuesday, June 16, 2015; 8.30 am
Dr. Frank E. Goodwin, International Zinc Association, Belgium
The Zinc Industry: New Developments
Tuesday, June 16, 2015; 9.00 am
Professor Dr.-Ing. Kaixi Jiang, BGRIMM – Beijing General Research Institute of Mining & Metallurgy
The Process Improvement Researches for Zinc Hydrometallurgy
Tuesday, June 16, 2015; 9.30 am
Huw Roberts, CHR Metals Limited, United Kingdom
Changing dynamics of long-term zinc and lead supplies
Tuesday, June 16, 2015; 10.00 am
Volker Spieth, VS. Globalmetal LLC, USA
Copper-Silver-Gold Deposits: Germany`s World-Class Potential in the 21. Century
Plenary Lectures of EMC and Pb-Zn Conference 2015 with General Interest for all Conference Participants
European Metallurgical Conference 2015 & Lead-Zinc 2015
Wednesday, June 17, 2015; 8.30 am
Bush, Andy; International Lead Association, England
The Sustainability Credentials of Lead
Wednesday, June 17, 2015; 9.00 am
B. Eng. Takashi Yoshida, Hikoshima Smelting Company, Japan
The Advance of Zinc Industry in Japan – The History and the Future from the Point of
View of Mitsui Mining and Smelting Company
Wednesday, June 17, 2015; 9.30 am
Professor Paul B. Queneau, Colorado School of Mines, USA
Recycling Lead and Zinc in the United States
Wednesday, June 17, 2015; 10.00 am
Dr. Matthias Simon, Gesamtverband der Deutschen Buntmetallindustrie e.V., Germany
The Economic Situation of the German Non-Ferrous Metal Industry – Non Ferrous
Metals focused by the World of Finance
EMC/Pb-Zn 2015 – List of Papers in Sessions as of June 11 The authors printed in bold are expected to present the paper.
Authors marked with a * are candidates for the Young Scientist’s Paper Award.
The Organizing Committee has the right to change the course of the programme, especially the sequence of presentation
of papers according to the necessities, misprints and errors are reserved.
European Metallurgical Conference 2015 & Lead-Zinc 2015
Monday, June 15, 11:00 Session
Recycling / Waste
General Pyrometallurgy
Copper
Chair ŚMIESZEK, Z. WENZL, C. FILZWIESER, A. Room 1 2 3
11:00 Benedek, Laura; Montanuniversität Leoben, Lehrstuhl für Nichteisen-metallurgie, Austria
Challenges Regarding
Recycling of REEs from
Permanent magnets in a
WEEE-fraction
Bellemans, Inge *; Verbeken,
Kim; Ghent University, Department of Materials Science and Engineering, Belgium; Moelans, Nele; KU Leuven, Department of Materials Engineering, Belgium
Modelling the Mechanical
Entrainment of Metal
Droplets by Solid Particles in
Liquid Slags
De Wilde, Evelien * et al.;
Ghent University, Department of Materials Science and Engineering, Belgium
Wetting Behaviour of Spinel
with Copper to Understand
Metallic Copper Losses to
Slags
11:25 Diaz, Fabian; RWTH Aachen University, Institut für Metallurgische Prozesstechnik und Metallrecycling (IME), Germany
High Efficiency Recycling
route of WEEE
Chen, Liugang * et al.; KU Leuven, Department of Materials Engineering, Belgium
Effect of ZnO on the
Reaction between MgO and
Fe-Saturated ZnO-
Containing Fayalite Slags
Haga, Kazutoshi et al.; Akita University, Graduate School of Engineering and Resource Science, Japan
Selective Removal of Arsenic
from Enargite and
Tennantite/Tetrahedrite by
Roasting Process
11:50 Sorger, Christoph et al. Montanuniversität Leoben, Lehrstuhl für Nichteisenmetallurgie, Austria
Effects of Pyrolysis on the
Metallurgical Processing of
Waste Electrical and
Electronic Equipment
Degel, Rolf et al.; SMS Siemag AG, Germany
History and new Milestones
in Submerged Arc Furnace
Technology for Ferro Alloy
and Silicon Production
Hamuyuni, Joseph; Taskinen,
Pekka; Aalto University, School of Chemical Technology, Finland
The Liquidus in Cu-O-Al2O3
Ternary System at 1175 and
1200 °C
12:15 Zöhrer, Marlis; Montanuniversität Leoben, Lehrstuhl für Nichteisenmetallurgie, Austria
Treatment of Industrial
Waste
Friedmann, David *; RWTH Aachen University, Institut für Metallurgische Prozesstechnik und Metallrecycling (IME), Germany
Pyrometallurgical Extraction
of Valuable Metals from
Polymetallic Deap-Sea
Nodules of the German
Licensed Territory
Dianbang, Shen et al.;
Dongying Fangyuan Nonferrous Metals Co., Ltd., China
Commercialization and
Study on the Mechanisms of
Bottom Blowing Copper
Smelting Process
EMC/Pb-Zn 2015 – List of Papers in Sessions as of June 11 The authors printed in bold are expected to present the paper.
Authors marked with a * are candidates for the Young Scientist’s Paper Award.
The Organizing Committee has the right to change the course of the programme, especially the sequence of presentation
of papers according to the necessities, misprints and errors are reserved.
European Metallurgical Conference 2015 & Lead-Zinc 2015
Monday, June 15, 11:00 Session
Lead Downstream Processing and Applications
Aluminium
Process Control
Zinc Recovery from EAF Dust Treatment
Chair BÖTTCHER, B. SCHARF-BERGMANN, R. GREGUREK, D. ANTREKOWITSCH, J. Room 7 15 16 17
11:00 Hesterberg, Treávis; Ellis,
Timothy W.; Prengaman,
David; RSR Technologies Inc., USA
Future Requirements for
Lead Based Materials in the
Battery Industry
Fiorese, Elena *; Bonollo,
Franco; University of Padova, Department of Management and Engineering, Italy
Process Parameters Affecting
Quality of High-Pressure Die-
Cast Al-Si Alloy
Aula, Matti; Fabritius, Timo;
University of Oulu, Finland; Pisilä, Sauli; Outotec Finland Oy, Finland
On-Line Analysis of Process
Conditions in Ilmenite
Smelting with Optical
Emission Spectrometry
Fujioka, K.; Hatae, S.; Miike Smelting Company Limited, Japan
EAF Dust and Secondary Fly
Ash Treatment by MF
Process at Miike Smelter
11:25 Wycklendt, Brian K.; Johnson Controls, USA; Toubartz,
Frank; Johnson Controls Recycling GmbH,Germany
The Need for the Sustainable
and Responsible Recycling of
Lead
Kremmer, Thomas;
Montanuniversität Leoben, Lehrstuhl für Nichteisenmetallurgie, Austria
Impact of Microstructural
Characteristics on the
Corrosion Morphology of
High-Strength Brazing
Sheets (Aluminium)
Dutta, Abhishek;Beyers,
Lesley J. et al.; KU Leuven, Department of Materials Engineering, Belgium
Hybrid Artificial Neural
Network and Genetic
Algorithm Modelling of Slag
Properties
Geier, Bernhard *;
Raupenstrauch, Harald; Montanuniversitaet Leoben, Department of Environmental and Energy, Austria; Pilz,
Karl; voestalpine Stahl GmbH, Austria Crude Zinc Oxide Production
from Steel Mill Dusts with
the RecoDust Process
11:50
Hardy, David; PENOX SA, Germany
European Lead Oxide
Market – Market Trends and
Changes in Applications with
a View on Consequences for
the Production and Process
Technology
Smetan, Herbert; SMETAN engineering GmbH, Germany
Materials and Processing
Methods to Improve the
Properties of Aluminium
Alloy Cylinder Heads
Schüdde, Jens; Mohsler, S.; Storch, H.; Outotec GmbH, Germany
Maximizing Power
Generation from
Metallurgical Sulphuric Acid
Plants
Heegaard, Bror; ScanArc Plasma Technologies AB, Sweden
Submerged Plasma
Technology and Works
within Zn/Pb Recovery
12:15 Ma, Baozhong; Wang, Haibei
et al.; Beijing General Research Institute of Mining & Metallurgy, China
The Research and
Engineering Practice of the
Lead Oxygen-enriched Flash
Smelting
Werinos, Marion; Montanuniversität Leoben, Lehrstuhl für Nichteisenmetallurgie, Austria
Influence of Alloy Production
History on Natural Aging of
AA6061 Modified with Sn
Griffiths, Derek; Scantech, Australia
Application of on Belt
Elemental Analysis using
PGNAA on Pb, Zn Ores for
Improved Plant Performance
and Process Control
Karasawa, Seiichi; Numata,
Kenji; Toho Zinc Co., Ltd, Onahama Refinery, Japan
Improvements of the
Production Process of Zinc
Oxide from Electric Arc
Furnace Dust
EMC/Pb-Zn 2015 – List of Papers in Sessions as of June 11 The authors printed in bold are expected to present the paper.
Authors marked with a * are candidates for the Young Scientist’s Paper Award.
The Organizing Committee has the right to change the course of the programme, especially the sequence of presentation
of papers according to the necessities, misprints and errors are reserved.
European Metallurgical Conference 2015 & Lead-Zinc 2015
Monday, June 15, 14:10 Session
Recycling / Waste
General Pyrometallurgy
Copper
Chair FORSÉN, O. SCHWAB, B. PESL, J. Room 1 2 3
14:10 Coleman, Mark E.; Schenck Process UK Ltd, UK
Recycling of Process
Arising's in Furnaces Using
Pneumatic Injected Feed
Jak, Eugene; The University of Queensland, Australia
Recent Advances in Research
for Non-ferrous Smelting and
Recycling
Stelter, Michael et al.; TU Bergakademie Freiberg, Institut für NE-Metallurgie und Reinststoffe, Germany
A New Electrolyte for
Copper Electrorefining?
14:35 Prajsnar, Ryszard; Czernecki,
Józef; Institute of Non-ferrous Metals, Poland
Recovery of Zinc, Lead and
Copper from Waste Multi-
Phase Slags in Oxidation-
Reduction Smelting Process
in the Pilot TSL Furnace
Kruse, Stephanie; RWTH Aachen University, Institut für Metallurgische Prozesstechnik und Metallrecycling (IME), Germany
Recovery of Rare Earth
Elements from NdFeB Based
Grinding Slurries
Hutabarat, Imelda;
Montanuniversität Leoben, Lehrstuhl für Nichteisenmetallurgie, Austria
Charactarisation and
Thermal Behaviour of
Indonesian Copper Sulphides
for Leaching Process
15:00 Preiß, Thorsten; Aurubis AG, Germany; Strobel, Dietrich; Brauer, Ingmar; TEWS Elektronik GmbH & Co. KG, Germany
Time-Saving Moisture
Measurement System at the
Aurubis Secondary Smelter
Michels, Daniel *; Kappes,
Horst; Paul Wurth S.A., Luxembourg
Dry Slag Granulation with
Energy Recovery: Operation
of Full Scale Pilot Plant
Hanusch, Bernhard; Lux,
Timm; Andritz MAERZ, Germany
MAERZ Direct-to-Wire®
Performing Results and New
Developments
15:25 Rao, Y. K.; University of Washington, USA
Chemical Vapour Deposition
of Fe2O3(s): Fe-O-Cl-Te
System
Hassan-Pour, Siran; RWTH Aachen University, Institut für Metallurgische Prozesstechnik und Metallrecycling (IME), Germany
Optinization of Processing
Cu-Cr Alloys via
Aluminothermic Reduction
EMC/Pb-Zn 2015 – List of Papers in Sessions as of June 11 The authors printed in bold are expected to present the paper.
Authors marked with a * are candidates for the Young Scientist’s Paper Award.
The Organizing Committee has the right to change the course of the programme, especially the sequence of presentation
of papers according to the necessities, misprints and errors are reserved.
European Metallurgical Conference 2015 & Lead-Zinc 2015
Monday, June 15, 14:10 Session
Aspects of Modern Zinc Production Technologies
Aluminium
Zinc Electrowinning
Zinc Recovery from EAF Dust Treatment
Chair GRUND, S. BRUCH, K. H. HENRY, P. VON BILLERBECK, E. Room 7 15 16 17
14:10 Dorner, Ulrike; German Mineral Resources, Federal Institut for Geosciences and Natural Resources, Germany
Evaluating Supply and
Demand Trends in the Zinc
Market
Davris, Panagiotis * et al.;
School of Mining and Metallurgical Engineering, Laboratory of Metallurgy, Greece
Leaching of Bauxite Residue
Using Task Specific Ionic
Liquid HbetTf2N
Hamilton, Ernie; Brochot Group, France
Contacts, Current, Kilowatts,
Corrosion, and Coating – The
Factors Influencing Selection
of the Optimum Zinc Plant
Cathode
Komori, Shintaro et al.;
Shisaka Smelting Co., LTD., Japan
Recovering Crude Zinc
Oxide from EAF Dust at
Shisaka Smelting Co., LTD
14:35 Sugawara, Akiya; Hachinohe Smelting Company Limited, Japan
Zinc and Lead Smelting at
Hachinohe Smelter
Doppler, Thomas; Montanuniversität Leoben, Lehrstuhl für Nichteisenmetallurgie, Austria
Optimisation of the Recycling
Process for Aluminium
Scraps with High Impurities
Mahon, Michael; Alfantazi,
Akram; University of British Columbia, Canada
Seasonal Effects on the
Water Balance in a Zinc
Electrowinning Cell House
Maccagni, Massimo; Nielsen,
J.; Engitec Technologies USA, USA
The INDUTEC® Process:
How Converting a Waste in
Saleable Products
15:00 Shimizu, Yuji; Yamaguchi,
Takuhiro; Minami, Hiroyuki; Toho Zinc Co.,LTD, Annaka Refinery, Japan
Improvement of Zinc
Electrolytic Process
Kadenkin, Alexander; Feierabend, Angelika; Bohling, Christian; SECOPTA GmbH, Germany
Laser Induced Breakdown
Spectroscopy (LIBS) for
Analysis and Sorting of
Aluminium Alloys
Nakano, Hiroaki et al.;
Kyushu University, Faculty of Engineering,Department of Materials Science and Engineering, Japan
Synergistic Effect of Gelatin
and Sb on the Deposition
Behavior and Texture of Zn
from Electrowinning
Nagasaka, T.; Chairaksa-
Fujimoto, Romchat; Tohoku University, Department of Metallurgy, Graduate School of Engineering, Japan
New Approach to Recover
Metallic Zinc from EAF Dust
by CaO Treatment
15:25 Wang, Haibei;Wang,
Rongshen et al; Beijing General Research Institute of Mining and Metallurgy, Mineral processing department, China
The Mineral Processing
Study for a Cu-Pb-Zinc Ore
with Carbon
Maccagni, Massimo; Engitec Technologies S.p.A., Italy; Nielsen, J.; Engitec Technologies USA, USA
Latest Developments in STE
Process: Engitec’s Secondary
Aluminium Salt Slag
Treatment
Shibata, Etsur, Nakamura,
Takashi, Sylwia Oleszek et al.;
Tohoku University, Institute of Multidisciplinary Research for Advanced Materials (IMRAM), Japan
Recycling of EAF Dusts with
Waste Plastics
EMC/Pb-Zn 2015 – List of Papers in Sessions as of June 11 The authors printed in bold are expected to present the paper.
Authors marked with a * are candidates for the Young Scientist’s Paper Award.
The Organizing Committee has the right to change the course of the programme, especially the sequence of presentation
of papers according to the necessities, misprints and errors are reserved.
European Metallurgical Conference 2015 & Lead-Zinc 2015
Monday, June 15, 16:20 Session
Recycling / Waste
General Pyrometallurgy / Copper
Copper
Chair PREIß, T. FRIEDRICH, B. KUHN, H-A. Room 1 2 3
16:20 Radwitz, Sebastian; RWTH Aachen University, Institut für Metallurgische Prozesstechnik und Metallrecycling (IME), Germany
Influencing the Electroslag
Remelting Process by
Varying fluorine Content of
the Utilized Slag
Riedl, Elke; Brandes, Peter; Schütz, Denis; Anton Paar GmbH, Austria
Rheological Behavior of
Alloys and Metals Melts
Okura, Takahiko; Toi,
Ryutaro; Tokoro, Chiharu; Waseda University, Department of Earth, Resources and Environmental Science and Engineering, Japan
Crystallization of Magnetite
Particles in Cooper Smelting
Slag by Slow Cooling for
Recovery of Useful Metals by
Physical Separation
16:45 Bernardes, Andréa Moura; Borsa, Maria Beatriz; Pérez
Bergmann, Carlos; Universidade Federal do Rio Grande do Sul, Brazil
The Effect of Operating
Parameters on the
Electrocoagulation-flotation
of a Graphitic Forging
Effluent
So, Lily Lai Chi; Faucher,
Santiago et al.; Hatch Ltd., Canada
Recent Developments in
Commercial Scale Dry Slag
Granulation and Heat
Recovery
Steinacker, Stephan;
Montanuniversität Leoben, Lehrstuhl für Nichteisenmetallurgie, Austria
Recycling of Residues from
the Copper Industry
17:10 Stuhlpfarrer, Philipp; Montanuniversität Leoben, Lehrstuhl für Nichteisenmetallurgie, Austria
Recycling of Nd2Fe14B
Magnets
Maruyama, Toru; et al.;
Kansai University, Department of Chemistry and Materials Engineering, Japan
Effect of Alloying Elements
on Monotectic Composition
of Lead Free Bronze with
Dispersed Sulfide Particles
Saltykov, Pavel; Strecker, Jörg
J. F. et al.; Engineering Dobersek GmbH, Germany
Design & Construction of a
Copper Plant Based on
Modern & Enviromental-
Friendly Processes
17:35
Baumbach, Juliane; Bombach,
Hartmut; Stelter, Michael; TU Bergakademie Freiberg, Institut für NE-Metallurgie und, Germany
Investigations of the
Behaviour of Thiourea and
Alternative Additives in
Copper Electrorefining
EMC/Pb-Zn 2015 – List of Papers in Sessions as of June 11 The authors printed in bold are expected to present the paper.
Authors marked with a * are candidates for the Young Scientist’s Paper Award.
The Organizing Committee has the right to change the course of the programme, especially the sequence of presentation
of papers according to the necessities, misprints and errors are reserved.
European Metallurgical Conference 2015 & Lead-Zinc 2015
Monday, June 15, 16:20 Session
Aspects of Modern Zinc Production Technologies
Aluminium Zinc Electrowinning
Zinc Recovery from EAF Dust Treatment
Chair NYBERG, J. SCHMITZ, D. GEENEN, C. RÜTTEN, J. Room 7 15 16 17
16:20 Coveney, James; Wood, Jacob et al.; Outotec Pty Ltd, Australia
The Outotec® Direct Zinc
Smelting Process
Pirker, Armin; Montanuniversität Leoben, Lehrstuhl für Nichteisenmetallurgie, Austria
Recycling of Aluminium
Scrap via Salt Process
Mohammadi, Maysam;
Mahon, Michael; Alfantazi,
Akram; The University of British Columbia, Department of Materials Engineering, Canada
Electrodeposition of the
MnO2 Layer on Lead-Based
Anodes in the Zinc
Electrowinning Process
Rösler, Gernot;
Montanuniversität Leoben, Lehrstuhl für Nichteisenmetallurgie, Austria
Sustainable Recovery of
Heavy Metals from
Metallurgical Dusts – The
2SDR Process
16:45 Frias, Carlos et al.; Cobre Las Cruces S.A., Spain
Flotation and
Hydroprocessing of Bulk
Concentrates from Las
Cruces Mine
Schlögl, Carina; Montanuniversität Leoben, Lehrstuhl für Nichteisenmetallurgie, Austria
Anodising of Recycling
Aluminium
Morimitsu, Masatsugu;
Zhang, T.; Ueda, M.; Doshisha University, Department of Environmental Systems Science, Japan
Amorphous Oxide Coated
Titanium Anode, MSA®, for
Energy-Efficient Zinc
Electrowinning without
Manganese Oxide Deposition
Ruh, Andreas; Kim, Dae-Soo; Befesa Steel Services GmbH
The Waelz Process –
Worldwide Most Used
Process for the Recycling of
Zinc Containing Residues
17:10 Ajibola, Olawale Olarewaju;
Oloruntoba, Daniel T.; Federal University of Technology, Metallurgical and Materials Engineering Dept, Nigeria; Owa, Adebayo Felix; Federal University Oye Ekiti, Materials and Metallurgical Engineering Dept., Nigeria
Leach-Electrowinning of
Zinc from Abakaliki
Complex Sulphide Ore
Brocchi, E. A. et al.; Pontifical Catholic University of Rio de Janeiro, Brazil
Chemical Processing of a
Glauconite Concentrate in
Order to Produce K2SO4 and
Al2O3
Takasaki, Yasushi et al.; Akita University, Japan
The Effect of the Current
Density Change on the Beta-
PbO2 Oxide Layer Formed
on the Pb-Ag Anode for Zinc
Electrowinning
Lahtinen, Marko; Saxén,
Björn; Outotec (Finland) Oy, Finland
Hydrometallurgical Zinc
Production from Fume
Oxides
17:35 Thoraval, Marion; RWTH
Aachen University, Institut für Metallurgische Prozesstechnik und Metallrecycling (IME), Germany
Metal Entrapment in Slag
During the Aluminium
Recycling Process in Tilting
Rotary Furnace
Stubbe, Gerald; VDEh-Betriebsforschungsinstitut GmbH, Germany; Hillmann,
Carsten; DK Recycling und Roheisen, Germany; Wolf, C.; VELCO Gesellschafft für Förder-, Spritz- und Siloanlagen mbH, Germany
Zinc and Iron Recovery from
Filter Dust by Melt Bath
Injection into an Induction
Furnace
EMC/Pb-Zn 2015 – List of Papers in Sessions as of June 11 The authors printed in bold are expected to present the paper.
Authors marked with a * are candidates for the Young Scientist’s Paper Award.
The Organizing Committee has the right to change the course of the programme, especially the sequence of presentation
of papers according to the necessities, misprints and errors are reserved.
European Metallurgical Conference 2015 & Lead-Zinc 2015
Tuesday, June 16, 11:00 Session
Copper Zinc Concentrate Roasting and Leaching
Zinc Recovery from EAF Dust Treatment
Chair FILZWIESER, I. STELTER, M. N.N.. Room 3 6 7
11:00 Houngaloune, Sengpasith * et
al.; Hokkaido University, Division of Sustainable Resources Engineering, Japan
The Use of Schwertmannite
for Arsenic Immobilization in
Copper Flotation Tailings
Tamargo, Francisco; TAM 5 S.L., Spain; Bhatter, Sushil; Binani Zinc Limited, India
A New Process for the Full
Recovery of Zinc and Other
Valuable Metals from Zinc
Concentrates
Takayama, Tone; dos Santos,
Fabiano Mariel; Magalhães,
Walter; Votorantim Metais Zinco (VMZ), Brazil
Treatment of Secondary Raw
Materials at Juiz de Fora
Zinc Smelter in Brazil
11:25 Angerer, Thomas; Montanuniversität Leoben, Lehrstuhl für Nichteisenmetallurgie, Austria
Development of a Lead-free
Brass Alloy
Yoshida, Takashi; Nishiyama,
Fumihiro et al.; Hikoshima Smelting Co. Ltd., Japan
Process Modification to
Increase the Amount of Fine
Concentrates by Wet Feed
Type Roaster in Hikoshima
Zinc Smelter
Mello Da Silva, Livia et al.;
Votorantim Metais Zinco, Brazil
Mineralogic Characterization
from the Waelz Circuit – Juiz
de Fora, Brazil
11:50 Leão, Versiane A. et al.;
Universidade Federal de Ouro Preto, Department of Metallurgical and Materials Engeng., Brazil
Column Bioleaching of
Secondary Copper Sulphides
with Extreme Thermophiles
Johto, Hannu; Boliden Harjavalta, Finland; Taskinen,
Pekka; Aalto University, Department of Material Science and Engineering, Finland; Metsärinta, Maija-
Leena; Outotec (Finland) Oy, Pori Research Center, Finland
Formation of Molten Sulfide
Phase in Systems Related to
Zinc Sulfide Roasting
Kozlov, P. et al.; JSC CZP Chelyabinsk Zinc Plant, Russia
Research and Development of
Technogenic Wastes
Recycling with Recovery of
Zinc, Lead and Tin
12:15 Maccagni, Massimo; Engitec Technologies S.p.A., Italy; Nielsen, J.; Engitec Technologies USA, USA
The ECUPREX® System:
Copper Recovery from Any
Different Copper Bearing
Materials
Takebe, Hiromichi; Okano,
Satosh; Okura, Takahiko; Ehime University, Graduate School of Science and Engineering, Japan
Effect of Transition Metal
Impurities on Phase and
Microstructure during the
Oxidizing Roasting of ZnS
Powder
Arnout, Sander; Nagels, Els; Serbruyns, An; InsPyro, Belgium
Reductive Power of Different
Carbon Materials
EMC/Pb-Zn 2015 – List of Papers in Sessions as of June 11 The authors printed in bold are expected to present the paper.
Authors marked with a * are candidates for the Young Scientist’s Paper Award.
The Organizing Committee has the right to change the course of the programme, especially the sequence of presentation
of papers according to the necessities, misprints and errors are reserved.
European Metallurgical Conference 2015 & Lead-Zinc 2015
Tuesday, June 16, 11:00 Session
Minor Metals (Rare Earth, Indium, Refractory Metals)
By-product Treatment and Strategic Metals Recovery
Technologies
Lead Refining, Downstream Processing and Applications
HSE Practics
Chair HEINZE, V. KUNICKÝ, Z. GOOVAERTS, H. MARTENSSON, C. G. Room 15 16 17 18
11:00 Bourbos, Evangelos * et al.;
National Technical University of Athens, School of Mining and Metallurgical Engineering, Greece
Electrodeposition of
Lanthanum from Ionic
Liquids at Room
Temperature
Prajsnar, Ryszard;
Miczkowski, Zdzisław et al.;
Institute of Non-ferrous Metals, Poland
Recovery of Lead in Copper
Smelters of KGHM Polska
Miedź S.A.
Nishigaki, Koudai;
Nakagawara, N.; Ichiya, K.; Kosaka Smelting & Refining Co.,Ltd., Japan
Operational Improvements at
Kosaka Lead Refinery
Beran, Martin; Aurubis AG, Germany
Lead them, but don’t lead
them – Lead in analytics and
blood lead analytics at
Aurubis
11:25 Elwert, Tobias; Goldmann,
Daniel; Römer, Felix; TU Clausthal, Institute of Mineral and Waste Processing, Germany
Separation of Lanthanides
from NdFeB Magnets Using
Alkyl Phosphonic Acid PC-
88A
Pichler, Christoph;
Montanuniversität Leoben, Lehrstuhl für Nichteisenmetallurgie, Austria
Sustainable Ways to Recycle
Metallurgical Residues in the
21st Century
Hamamoto, Makoto et al.;
Mitsui Mining and Smelting CO., Ltd., Japan
The Optimization of
Takehara Lead Refinery
Operation
Lakemeyer, Margot; ArbMed, Germany
Metals – an Update on
Managing Occupational
Health Risks
11:50 Vogel, Hanno; RWTH Aachen University, Institut für Metallurgische Prozesstechnik und Metallrecycling (IME), Germany
Development and Research
Trends of the Neodymium
Electrolysis – A Literature
Review
Lv, Jianfang et al.;
Northeastern University, School of Materials and Metallurgy, China
Feasibility Study on
Recycling Lead from Lead
Glass through Lead Smelting
Process
Nakashima, Kota; Usui,
Shojiro; Sasaoka, Hidetoshi; Hitachi Works, Technology Development Center, JX Nippon Mining & Metals Corporation, Japan
Electrolytic Refining of Lead
from Secondary Material
using a Sulfamate Electrolyte
Gilles, Mik et al.; International Cadmium Association (ICdA), Belgium
Practical Solutions for
Minimizing the Cd
Occupational Exposure Risk
in the Zinc/Cadmium
Industry
12:15 Voßenkaul, Daniel et al.; RWTH Aachen University, Institut für Metallurgische Prozesstechnik und Metallrecycling (IME), Germany
Extraction of Rare Earth
Elememts from non-Chinese
Ion Adsorption Clays
Shima, Nobuhiro; Hashimoto,
Naoki; Kitano, Takayuki; Toho Zinc Co., Ltd., Chigirishima Refinery, Japan
Effect of Various Conditions
in the Lead Electrolytic
Process
Nowińska, Katarzyna;
Adamczyk, Zdzisław; Silesian University of Technology, Faculty of Mining and Geology, Poland
Mobility in Ground-Water
Envirnonment of ZnS
Contained in
Pyrometallurgical Zn-Pb
Dust
EMC/Pb-Zn 2015 – List of Papers in Sessions as of June 11 The authors printed in bold are expected to present the paper.
Authors marked with a * are candidates for the Young Scientist’s Paper Award.
The Organizing Committee has the right to change the course of the programme, especially the sequence of presentation
of papers according to the necessities, misprints and errors are reserved.
European Metallurgical Conference 2015 & Lead-Zinc 2015
Tuesday, June 16, 14:10 Session
Copper
Zinc Concentrate Roasting and Leaching
Chair HANUSCH, B ZEIDLER, O. Room 3 6
14:10 Hellstén, Niko; Finland; Hamuyuni, Joseph; Taskinen,
Pekka; Aalto University, School of Chemical Technology, Finland
High-Temperature
Solubilities in the Cu-O-MgO
System at Metallic Copper
Saturation
Jung, Jochen; Keller,
Wolfgang; EKATO Rühr- und Mischtechnik GmbH, Germany
Process and Cost Optimized
Agitator Solutions for
Hydrometallurgical Base
Metals Processing
14:35 Vickress, Dustin;Jastrzebski,
Maciej et al.; Hatch Ltd., Canada
New Technology for the
Improvement of Flash
Furnace Smelting
Performance
Aromaa, Jari; Rusanen, Lauri; Forsén, Olof; Aalto University, Department of Materials Science, Finland
Deposition of Hematite from
Zinc Sulphate Solution
15:00 Kojo, Ilkka V.; Reuter, Markus
A.; Outotec Oyj, Finland
Primary Copper Smelting
Impact
Xu, Zhifeng; Lan, Yuanjun; Jiangxi University of Science and Technology, School of Metallurgical and Chemical Engineering, China; Jiang,
Kaixi; Beijing General Research Institute of Mining and Metallurgy, China
Pressure Leaching of
Marmatite Concentrate with
Lignite Coal as Elemental
Sulfur Disperser
15:25 Kolczyk, Ewa et al.; Institute of Non-Ferrous Metals, Poland
Numerical Modelling of
Cleaning Slag from a Process
of Converting CuPbFe Alloy
Safari, Mehdi et al.; University of Cape Town, Centre for Minerals Research, South Africa
The Effects of Present Ions in
Lead Sulfate Halide Leaching
from Zinc Leaching Plant
Residual Cake
EMC/Pb-Zn 2015 – List of Papers in Sessions as of June 11 The authors printed in bold are expected to present the paper.
Authors marked with a * are candidates for the Young Scientist’s Paper Award.
The Organizing Committee has the right to change the course of the programme, especially the sequence of presentation
of papers according to the necessities, misprints and errors are reserved.
European Metallurgical Conference 2015 & Lead-Zinc 2015
Tuesday, June 16, 14:10 Session
Minor Metals (Rare Earth, Indium, Refractory Metals)
By-product Treatment and Strategic Metals Recovery
Technologies
Lead Refining, Downstream Processing and Applications /
Lead Process Fundamentals,
Modelling and New Processes
HSE Practics / Aspects of Modern Primary Lead
Smelting Technologies
Chair ROMBACH, E. PLITZKO, C. KONGOLI, F. TSONEV, R. Room 15 16 17 18
14:10 Bartosinski, Marek; RWTH Aachen University, Institut für Metallurgische Prozesstechnik und Metallrecycling (IME), Germany
Separation of Semiconductor
Layers from Thin Film Solar
Panels Using Microwave
Radiation
Penchel JR, Sérgio de A. et al.;
Votorantim Metais Zinco, Brazil
Metals Recovery of Cements
– Juiz de Fora, Brazil
Stopić, Srećko; Träger,
Thomas; Friedrich, Bernd;
RWTH Aachen University, Institut für Metallurgische Prozesstechnik und Metallrecycling (IME), Germany
Lead Oxide Battery Grade
Synthesis via Formation and
Decomposition of Lead
Citrate
Buch, Stefan; BERZELIUS Metall GmbH, Germany
Current Situation and
Development of Regulatory
Activities
14:35 Ebner, Tamara; Montanuniversität Leoben, Lehrstuhl für Nichteisenmetallurgie, Austria
Reuse of Metal Cutting Tools
by Wet Chemical Decoating
Bangs, Colton E. et al.;
Umicore Precious Metals Refining, Belgium
Outsourcing of Lead and Zinc
By-Product Treatment: A
Win-Win-Win Scenario
Maccagni, Massimo; Engitec Technologies S.p.A., Italy; Nielsen, J.; Engitec Technologies USA, USA; Hymer, T.; The Doe Run Company, USA
The FLUBOR® Process: Pilot
Tests Results
Alvear, Gerard; Burrows,
Alistair S.; Glencore Technology Pty Ltd, Australia; Azekenov, Turarbek; Zatayev,
R.; Kazzinc Ltd., Kazakhstan
Lead ISASMELTTM
Operations at Ust-
Kamenogorsk
15:00 Luidold, Stefan; Montanuniversität Leoben, Lehrstuhl für Nichteisenmetallurgie, Austria
Challenges in the field of
extractive metallurgy
oftechnological metals
Mocellin, Julien et al.; Institut National de la Recherche Scientifique, Centre Eau Terre et Environnment, Canada
Hydrometallurgical Recovery
of Manganese, Zinc and Lead
from Pyrometallurgy Sludge
Maccagni, Massimo; Engitec Technologies S.p.A., Italy; Nielsen, J.; Engitec Technologies USA, USA
The Lead Acid Battery Paste
Electrowinning with the
FAST Pb Process
Chen, Shaolong et al.; Kumera Technology Center, Finland
Drying Blended Concentrates
by Kumera Steam Dryer for
Kivcet Lead Flash Smelting
15:25
Gregurek, Dean et al.; RHI AG; TC Leoben, Austria
Wear of Refractory Linings
in the Lead and Zinc Industry
EMC/Pb-Zn 2015 – List of Papers in Sessions as of June 11 The authors printed in bold are expected to present the paper.
Authors marked with a * are candidates for the Young Scientist’s Paper Award.
The Organizing Committee has the right to change the course of the programme, especially the sequence of presentation
of papers according to the necessities, misprints and errors are reserved.
European Metallurgical Conference 2015 & Lead-Zinc 2015
Tuesday, June 16, 16:20 Session
Zinc Solvent Extraction / Zinc Downstream Processing,
Applications and Secondary
Smelting
Chair PICHLER, C. Room 6
16:20 Parra Sánchez, Raquel; Calvo
Catalan, Jaime; et al.; TECNICAS REUNIDAS, Spain
Zinc Calcine Treatment by
ZINCEXTM Solvent
Extraction Based Process
16:45 Oloruntoba, D.T.; Popoola, A
P I; Tshwane University of Technology, Department of Chemical, Metallurgical and Materials Engineering, South Africa
Zinc Phosphating for Safety
Enhancement of Carbon
Steels in Chloride
Environment
17:10 Schmitz, Daniel; Schauries,
Bodo; Metallwerk Dinslaken GmbH & Co KG, Germany
Multistage Removal of
Aluminium from Secondary
Zinc – a Challenge in Zinc
Recycling
17:35
EMC/Pb-Zn 2015 – List of Papers in Sessions as of June 11 The authors printed in bold are expected to present the paper.
Authors marked with a * are candidates for the Young Scientist’s Paper Award.
The Organizing Committee has the right to change the course of the programme, especially the sequence of presentation
of papers according to the necessities, misprints and errors are reserved.
European Metallurgical Conference 2015 & Lead-Zinc 2015
Tuesday, June 16, 16:20 Session
Minor Metals (Rare Earth, Indium, Refractory Metals)
By-product Treatment and Strategic Metals Recovery
Technologies
Lead Process Fundamentals, Modelling and New Processes
Aspects of Modern Primary Lead Smelting Technologies
Chair N.N.. TOUBARTZ, F. FISCHER, M. MEURER, U. Room 15 16 17 18
16:20 Rasenack, Kai; Goldmann,
Daniel; TU Clausthal, Institute of Mineral and Waste Processing, Germany
Recycling of Indium from
End-of-Life LCD's
Steinlechner, Stefan;
Montanuniversität Leoben, Lehrstuhl für Nichteisenmetallurgie; Austria
Recycling Potential of
Precious Metals Form Zinc,
Lead and Copper Containing
Residues
Marschall, Hans Ulrich; RHI AG Technology Center Leoben, Austria; Kreuzer, D.; Spanring, A.; RHI AG Industrial Division, Austria
Thermo Mechanical Analysis
of a Lead-Rotary Furnace
with Finite Element
Simulation
Kehaiov, Yavor;Tsonev,
Rumen et al.; KCM 2000 AD, Bulgaria
Modern Lead Smelting
Technologies: Modern Means
Resilient
16:45 Ratschbacher, Karin; Montanuniversität Leoben, Lehrstuhl für Nichteisenmetallurgie, Austria
Oxidation Kinetics of a
Molybdenum-Tantalum-
Alloy
Binz, Florian; Friedrich,
Bernd; RWTH Aachen University, IME Metallurgische Prozesstechnik und Metallrecycling, Germany
Development of Secondary
Antimony Oxides for the
Application in Plastic
Products
Moulin Silva, Wagner; Bruno
Augusto, Batista Ribeiro; Magnesita Refratários S.A., Brazil
Computer Fluid Dynamic
Simulations of the Tapping
Process in a Lead Short
Rotary Furnace
Zhang, Johnny et al.; Central South University, Department of Metallurgy, China
Direct Reduction of Molten
Lead Rich Slag using Eco-
Geen YGL Technology
17:10 Chmielarz, Andrze et al.;
Institute of Non-Ferrous Metals; Gliwice, Poland
A Case Study on Indium
Recovery from by-Product
Lead Alloy
Nagels, Els; Arnout, Sander;
InsPyro N.V., Belgium
Understanding Matte
Formation Using the
Ellingham Diagram for
Sulphides
Coleman, Mark E.; Schenck Process UK Ltd, UK
Upgrade of QSL Furnace
Pulverised Coal Feed at
Korea Zinc
17:35 Ogino, Fumihiko; Nishiwaki,
M.; Fukay, T.; Hosokura Metal Mining Co.,LTD., Japan
The Improvement of Bismuth
Recovery
Böttcher, Bernd; Bähre,
Wolfgang; Knoop, Franz
Martin; JL Goslar GmbH, Germany;
The Lead Anode in Galvano
Technique – A High Tech
Operating Resource?
EMC/Pb-Zn 2015 – List of Papers in Sessions as of June 11 The authors printed in bold are expected to present the paper.
Authors marked with a * are candidates for the Young Scientist’s Paper Award.
The Organizing Committee has the right to change the course of the programme, especially the sequence of presentation
of papers according to the necessities, misprints and errors are reserved.
European Metallurgical Conference 2015 & Lead-Zinc 2015
Wednesday, June 17, 11:00 Sessions Precious Metals Bio Leaching / Zinc Process
Fundamentals, Modelling
and New Processes
Chair KERNEY, U. DECKERS, K. Room 3 7
11:00 Schmitz, Wilfried; Otto Junker GmbH, Germany; Esser, Knut; Berzelius Stolberg GmbH, Germany
Modern Vacuum Distillation
Technology for Zinc
Recovery in Primary Silver
Production
Schlüter, Ralf; Mischo,
Helmut; TU Bergakademie Freiberg, Department of Minning and Special Civil Engineering, Germany
Innovative Conditioning
Approaches for Underground
In-situ Bioleaching
Application
11:25 Deveci, Haci et al.; Karadeniz Technical University, Department of Mining Engineering, Turkey
Pre-treatment of a Copper-
rich Gold Ore for
Elimination of Copper
Interference
Leão, Versiane Albis;
Universidade Federal de Ouro Preto, Brazil; Pina, Pablo S.; Souza, Adelson D.; Votorantim Metais Zinc, Brazil
Batch and Continuous
Bioleaching of Zinc Sulfide
Concentrates with Moderate
Thermophiles
11:50 Dianbang, Shen et al.;
Dongying Fangyuan Nonferrous Metals Co., Ltd., China
The New Development of
Copper and Gold Smelting
Together
Tokoro, Chiharu et al.;
Waseda University, Department of Earth, Resources and Environmental Science and Engineering, Japan
Surface Complexation
Modelling for Zn(II)
Removal by Aluminium
Hydroxide from AMD
12:15 Celep, Oktay et al.; Karadeniz Technical University, Department of Mining Engineering, Turkey
Characterization of
Refractoriness of an
Arsenical Silver Ore
Maccagni, Massimo; Engitec Technologies S.p.A., Italy; Nielsen, J.; Engitec Technologies USA, USA; Hymer, T.; The Doe Run Company, USA
A Hydrometallurgical
Process to Produce Zinc from
Both Primary and Secondary
Sources
EMC/Pb-Zn 2015 – List of Papers in Sessions as of June 11 The authors printed in bold are expected to present the paper.
Authors marked with a * are candidates for the Young Scientist’s Paper Award.
The Organizing Committee has the right to change the course of the programme, especially the sequence of presentation
of papers according to the necessities, misprints and errors are reserved.
European Metallurgical Conference 2015 & Lead-Zinc 2015
Wednesday, June 17, 11:00 Sessions General Hydrometallurgy By-product Treatment and
Strategic Metals Recovery
Technologies
Nickel / Cobalt / Vanadin (NCV)
Light Metals (Mg, Li, Ti)
Chair ANTREKOWITSCH, H. SIEGMUND, A. LUIDOLD, S. SCHOLEMANN, B. Room 15 16 17 18
11:00 Aromaa, Jari; Lehtiniemi, Iiro;
Forsén, Olof; Aalto University, School of Chemical Technology, Finland
Corrosion and Wear of
Mixed Metal Oxide Anodes
in Electrowinning
Pecharroman, E. et al.;
TECNICAS REUNIDAS, Proprietary Technology Development, Spain
ECOLEADTM Process: A
Clean Technology to Recover
Lead and Silver from
Residues
Leszczyńska-Sejda, Katarzyna et al.; Instytut Metali Nieźelaznych, Poland
Hydrometallurgical Method
for Production of CoWO4
Haccuria, Elien *; Hayes,
Peter C.; Jak, Evgueni; The University of Queensland, School of Chemical Engineering, Australia
Phase Chemistry Study of the
Al2O3-CaO-SiO2 System to
Support Lithium Ion Battery
Recycling
11:25 Patiño, Francisco et al.;
Universidad Autónoma del Estado de Hidalgo, Área Académica de Ciencias de la Tierra y Materiales, Mexico
Synthesis and Topology of
the Reaction of Mercury
Jarosite in NaOH Medium
Henry, Philippe;
HYDROMETAL SA, Belgium
30 Years of Recycling of Zinc
and Lead Bearing Materials
at HYDROMETAL
(Belgium)
Pietek, Grzegorz et al.; Instytut Metali Nieźelaznych, Poland
Solvent Extraction of Nickel
by Versatic 10 Extractant
Kurama, Haldun; Eskişehir Osmangazi University, Mining Engineering Department, Turkey; Hoşgün, H. L.; Bursa Technical University, Chemical Engineering Department, Turkey
Kinetics of Thermal
Decomposition and
Hydration of Magnesia
Waste 11:50
Patiño, Francisco et al.;
Universidad Autónoma del Estado de Hidalgo, Área Académica de Ciencias de la Tierra y Materiales, México
Synthesis and Nature of the
Reaction of a Solid Solution
of Ammonium-Potassium
Arsenojarosite in NaOH
medium
Chintinne, Mathias; Smets,
Steven; Metallo-Chimique N.V., Beligium
Treatment of Complex Scrap
at Metallo-Chimique
Readett, David; Mworx Pty Ltd, Australia; Sullivan, Jamie; GME Resources Ltd, Australia
Development of a Ni Laterite
Heap Leach-SX-EW
Flowsheet – GME’s NiWest
Nickel Project
Ohmann, Sven; Ditze, Andre; Scharf, Christiane; TU Clausthal, Institute of Metallurgy, Germany
Recycling of Magnesium
Chips
12:15 Lv, Jianfang; Xie, Feng et al.;
Northeastern University, School of Materials and Metallurgy Engineering, China
Extraction of Heavey Metals
from Waste Solutions by
Emulsion Liquid Membranes
Using Tributylphosphate
(TBP) as Extractant
EMC/Pb-Zn 2015 – List of Papers in Sessions as of June 11 The authors printed in bold are expected to present the paper.
Authors marked with a * are candidates for the Young Scientist’s Paper Award.
The Organizing Committee has the right to change the course of the programme, especially the sequence of presentation
of papers according to the necessities, misprints and errors are reserved.
European Metallurgical Conference 2015 & Lead-Zinc 2015
Wednesday, June 17, 14:10 Session
Precious Metals
Zinc Process Fundamentals, Modelling and New Processes
Chair BALTES, M. STOPIĆ, S.
Room 3 7
14:10 Brunelli, Katya; Cerchier, P.; Dabalà, M.; University of Padua, Department of Industrial Engineering, Italy
Ultrasound Assisted Leaching
Process for Precious Metals
Recovery from Solid
Municipal Waste
Wieckert, Christian;
Tzouganatos, Nikolaos; Paul Scherrer Institut (PSI), Solar Technology Laboratory, Switzerland
Using Concentrated Solar
Radiation in Zinc Metallurgy
14:35 Deegan, David; Johnson, Tim; Tetronics International Ltd, UK
Recovering Precious Metals
& Base Metals from Wastes
Using DC Plasma Arc
Technology
Nakamura, Hirofumi; Yamada, Koji; Aichi, Taro;
Akita Zinc Co.,Ltd., Japan
Development of the “Pb
Less” Electrolytic Zinc
Technology
15:00 Nagai, Takashi et al.; Chiba Institute of Technology, Japan
Recovery of Platinum Group
Metals from Wasted
Automobile Catalyst Using
Perovskite-type Oxide
O’Shea, Brenden; Cooper,
Ross; Hatch, Australia
Effective Front End Loading
of Projects to Support
Equipment Selection and
Flow sheet Optimisation
15:25 Yazici, Ersin Y.; Deveci, Haci; Yazici, Ridvan; Karadeniz Technical University, Department of Mining Engineering, Turkey;
Base and Precious Metal
Losses in Magnetic
Separation of Waste Printed
Circuit Boards (WPCB)
Hernandez-Ramirez, Aurelio;
Romero-Serrano, Antonio et
al.; Departamento de Ingeniería en Metalurgia y Materiales, Mexico
Process Simulation and
Control Optimization of the
Lead Sintering Roasting
Process
EMC/Pb-Zn 2015 – List of Papers in Sessions as of June 11 The authors printed in bold are expected to present the paper.
Authors marked with a * are candidates for the Young Scientist’s Paper Award.
The Organizing Committee has the right to change the course of the programme, especially the sequence of presentation
of papers according to the necessities, misprints and errors are reserved.
European Metallurgical Conference 2015 & Lead-Zinc 2015
Wednesday, June 17, 14:10 Session
Zinc and Lead Mines and Ores Aspects
Secondary Lead Production
Light Metals (Mg, Li, Ti)
Chair SALEHI, F. SCHIERLE, T. SCHARF, C.
Room 16 17 18
14:10 Hesse, Max; Lieberwirth,
Holger; TU Bergakademie Freiberg, Institute for Mineral Processing Machines, Germany
Selective Comminution for
Pre-Concentration at
Mineral Processing
Kunicky, Zdenek; Kovohute Pribram nastupnicka, a.s., Czech Republic
Development of
Polypropylene Recycling
from Lead Acid Batteries for
Blast Furnace Operation
Zhang, Rui *; Taskinen,
Pekka; Aalto University, Metallurgical Thermodynamics and Modelling, Finland
Experimental Investigation
and Thermodynamic
Modelling of the BaO-MgO
System
14:35 Safari, Mehdi; University of
Cape Town, Centre for Minerals Research, South Africa; Kashani, Masoud; Islamic Azad University, Department of Mining Engineering, Iran; Zarei,
Hossein; Ghader Sanate Zagros (GSZ) Company, Iran
Selective Flotation
Optimization of Sphalerite
from Lead and Zinc Ore
Complex (sulphide-oxide)
Maccagni, Massimo; Engitec Technologies S.p.A., Italy; Nielsen, J.; Engitec Technologies USA, USA
Improvements in Secondary
Lead Smelting
Köser, Ole; Calcom ESI SA, Switzerland; Rückert, Jürgen; ESI GmbH, Germany; Ubl,
Peter; Stihl, Germany
Modelling and Optimization
of Part Ejection in
Magnesium High Pressure
Die Casting
15:00
Fischer, Martin; Raabe, Lutz; Muldenhütten Recycling und Umwelttechnik GmbH, Germany
Energy Consideration at
MRU GmbH in Freiberg – a
Lead Recycler with
Integrated Hazardous Waste
Incinerator and Plastic
Compounding
Song, Nannan et al.; Instituto de Engenharia Mecânica e Gestão Industrial (INEGI), Portugal
The Influence of Face Coat
Material on the Ti6Al4V and
TiAl Alloys During
Investment Casting Process
15:25