Upload
others
View
9
Download
2
Embed Size (px)
Citation preview
Sales HandbookPLEXIGLAS®
Section A
SECTION A
Films
2.1 PLEXIGLAS® Resist – Rolls – Sheets
Multi-Skin Sheets3.1 PLEXIGLAS® Alltop
3.2 PLEXIGLAS® Heatstop
3.3 PLEXIGLAS® Resist
Corrugated Sheets4.1 PLEXIGLAS® Heatstop
4.2 PLEXIGLAS® Resist
Tubes5.1 PLEXIGLAS® XT
– Clear – White
5.2 PLEXIGLAS® Satinice
5.3 PLEXIGLAS® Special programme
Rods6.1 PLEXIGLAS® GS
6.2 PLEXIGLAS® XT
6.3 PLEXIGLAS® LED
Assembly Accessories7.1 Installation of PLEXIGLAS® multi-skin sheets
7.2 Installation of PLEXIGLAS® corrugated sheets
Service Products8.1 Solvent-based adhesives
8.2 Reactive adhesives
8.3 Additives
8.4 Colorants for coloring ACRIFIX® 2R 0190 and ACRIFIX® 2R 0195
8.5 Cleaning, care and polishing agents
Solid Sheets
1.1 PLEXIGLAS® GS – Clear – White – Colored – Fluorescent – UV-transmitting – Information Section
1.2 PLEXIGLAS® XT – Clear – White – Colored – UV-transmitting – UV 100 – Information Section
1.3 PLEXIGLAS® Heatstop
1.4 PLEXIGLAS® Hi-Gloss
1.5 PLEXIGLAS® LED – For back lighting – For edge lighting – For side lighting
1.6 PLEXIGLAS® Mineral
1.7 PLEXIGLAS® Optical – High purity – Hard coated
1.8 PLEXIGLAS® Reflections
1.9 PLEXIGLAS® Resist – Extruded acrylic – Cast acrylic
1.10 PLEXIGLAS® Satinice – Cast acrylic – Extruded acrylic – Optimally light diffusing – Information section
1.11 PLEXIGLAS® Solar
1.12 PLEXIGLAS® Soundstop
1.13 PLEXIGLAS® Textures
................................... (former PLEXIGLAS® Fluorescent)...................... (former PLEXIGLAS SUNACTIVE®)
...................... (former PLEXIGLAS SUNACTIVE®).................................................... (former PLEXIGLAS Gallery®)
.......(former PLEXIGLAS HEATSTOP® XT)
......... (former PLEXIGLAS truLED® und Dual Color)
...................... (former PLEXIGLAS® EndLighten T)
............... (former PLEXICOR® FreeStyle and PLEXICOR® Xkin)
...................................... (former PLEXIGLAS® Superclear)................................................(former PLEXIGLAS® RP)
............. (former PLEXIGLAS® MIRROR)
............................... (former PLEXIGLAS RESIST®).................................... (former PLEXIGLAS RESIST® HP)
...................................... (former PLEXIGLAS SATINICE®)
........... (former PLEXIGLAS® Satin Ice)
..... (former PLEXIGLAS SOUNDSTOP®)
................... (former PLEXIGLAS® Textured)
...................... (former PLEXIGLAS ALLTOP®)
.......... (former PLEXIGLAS HEATSTOP®)
....................... (former PLEXIGLAS RESIST®)
......... (former PLEXIGLAS HEATSTOP®)
................. (former PLEXIGLAS® Satin Ice)
................. (former PLEXIGLAS® EndLighten T)
................. (former PLEXIGLAS RESIST® and PLEXIGLAS® BASIC)
2
Solid Sheets | cast acrylic
3
Solid Sheets
1.1 PLEXIGLAS® GS – Clear – White – Colored – Fluorescent – UV-transmitting – Information Section
1.2 PLEXIGLAS® XT – Clear – White – Colored – UV-transmitting – UV 100 – Information Section
1.3 PLEXIGLAS® Heatstop
1.4 PLEXIGLAS® Hi-Gloss
1.5 PLEXIGLAS® LED – For back lighting – For edge lighting – For side lighting
1.6 PLEXIGLAS® Mineral
1.7 PLEXIGLAS® Optical – High purity – Hard coated
1.8 PLEXIGLAS® Reflections
1.9 PLEXIGLAS® Resist – Extruded acrylic – Cast acrylic
1.10 PLEXIGLAS® Satinice – Cast acrylic – Extruded acrylic – Optimally light diffusing – Information section
1.11 PLEXIGLAS® Solar
1.12 PLEXIGLAS® Soundstop
1.13 PLEXIGLAS® Textures
Solid Sheets
................................... (former PLEXIGLAS® Fluorescent)...................................... (former PLEXIGLAS® Superclear).................................................(former PLEXIGLAS® RP)
............ (former PLEXIGLAS® MIRROR)
............................... (former PLEXIGLAS RESIST®).................................... (former PLEXIGLAS RESIST® HP)
...................................... (former PLEXIGLAS SATINICE®)
........... (former PLEXIGLAS® Satin Ice)
..... (former PLEXIGLAS SOUNDSTOP®)
................... (former PLEXIGLAS® Textured)
...................... (former PLEXIGLAS SUNACTIVE®)
...................... (former PLEXIGLAS SUNACTIVE®).................................................... (former PLEXIGLAS Gallery®)
....... (former PLEXIGLAS HEATSTOP® XT)
......... (former PLEXIGLAS truLED® and Dual Color)
..................... (former PLEXIGLAS® EndLighten T)
................ (former PLEXICOR® FreeStyle and PLEXICOR® Xkin)
State October 2015 4
Solid Sheets | cast acrylic
On request• smaller quantities
• other thicknesses
• Clear (245, 249) all thicknesses for aviation industry
• Other sizes 3800 × 1800 mm, 5000 × 2000 mm, 6000 × 2200 mm, 6000 × 3000 mm, 7800 × 3000 mm
1.1 PLEXIGLAS® GSClear
Sheets
Color Number Transmission τD65Number of sheets per pallet (thickness in mm, size 3050 × 2030 mm)
Color 2 3 4 5 6 8 10 12 15 20 25*
Clear UV 100 GS 0A31 TP 92 % a – ü ü ü ü – – – – – –
Clear 0F00 TP 92 % a 60 40 30 25 20 15 12 10 8 6 5
ClearGreater solvent resistance 0Z09 TP 92 % a – ü ü ü ü ü ü – – – –
ClearHighest requirements for transmission in the visible and UV wavelength range, UV-transmitting 0Z18 TP 92 % a – ü ü ü ü ü ü – – – –
* 3000 × 2000 mm
ReferenceFor further details see information section
TP transparent
a constant transmission for all thicknesses
40 items with colored background are available from stock.
ücan be manufactured. Please inquire about delivery periods and minimum order quantities for these items.
– not available
30 Year Guarantee – PLEXIGLAS® no yellowing. Applies to all products listed above.
Continuation see next page
State October 2015 5
Solid Sheets | cast acrylic
On request• smaller quantities
• other thicknesses
• Other sizes 3800 × 1800 mm, 5000 × 2000 mm, 6000 × 2200 mm, 6000 × 3000 mm, 7800 × 3000 mm
• Blocks for special applications e. g. glazing of large aquariums (with QPA certificate and Germanischer Lloyd approvals, see Chapter B3)
• Blocks with special optical properties e. g. for lenses and prisms
• Blocks with increased resistance to solvents and chemicals
• Colored blocks in thicknesses up to 100 mm transparent, translucent and fluorescent
1.1 PLEXIGLAS® GSClear
Blocks
Color Number Transmission τD65Number of sheets per pallet (thickness in mm, size 3000 × 2000 mm)
Color 30 35 40 50 60 70 80 90 100 110 120
Clear 0F00 TP > 90 % 4 3 3 2 2 1 1 ü ü ü ü
ReferenceFor further details see information section
TP transparent
40 items with colored background are available from stock.
ücan be manufactured. Please inquire about delivery periods and minimum order quantities for these items.
30 Year Guarantee – PLEXIGLAS® no yellowing. Applies to all products listed above.
State October 2015
Solid Sheets | cast acrylic
6
1.1 PLEXIGLAS® GSWhite
Sheets
Color Number Transmission τD65Number of sheets per pallet (thickness in mm, size 3050 × 2030 mm)
Color 3 4 5 6 8 10 12 15 20 25*
White WH10 TL 70 % b 40 30 25 ü ü 12 ü ü ü ü
White WH17 TL 90 % b 40 ü ü ü ü ü ü ü ü ü
White WH02 TL 44 % b 40 30 25 20 15 12 ü ü ü ü
White WH73 TL 23 % b 40 30 25 20 15 12 ü ü ü ü
White WH01 TL 3 % b 40 30 25 20 15 12 ü ü ü ü
White WM03 OP 0 % c 40 ü ü ü ü ü ü ü ü ü
* 3000 × 2000 mm
On request• smaller quantities • other colors
ReferenceFor further details see information section
TL translucent
OP opaque
b constant transmission for thicknesses of 3–10 mm
c transmission as a function of thickness
40 items with colored background are available from stock.
ücan be manufactured. Please inquire about delivery periods and minimum order quantities for these items.
State October 2015
Solid Sheets | cast acrylic
7
1.1 PLEXIGLAS® GSColored
Continuation see next page
ReferenceFor further details see information section
On request• smaller quantities • other colors
TL translucent
TP transparent
a constant transmission for all thicknesses
b constant transmission for thicknesses of 3–10 mm
40 items with colored background are available from stock.
ücan be manufactured. Please inquire about delivery periods and minimum order quantities for these items.
SheetsColor Number Color Transmission τD65
Number of sheets per pallet (thickness in mm, size 3050 × 2030 mm)
Color 3 4 5 6 8 10 12 15 20
Yellow 1C33 TP 63 % a 40 ü ü ü ü ü ü ü ü
Yellow 1H01 TL 22 % b 40 30 25 ü ü ü ü ü ü
Cream 1H02 TL 27 % b 40 ü ü ü ü ü ü ü ü
Yellow 1H20 TL 15 % b 40 ü ü ü ü ü ü ü ü
Orange 2C04 TP 39 % a 40 ü ü ü ü ü ü ü ü
Orange 2H02 TL 6 % b 40 ü ü ü ü ü ü ü ü
Red 3C01 TP 4 % a 40 ü ü ü ü ü ü ü ü
Red 3H00 TL 11 % b 40 ü ü ü ü ü ü ü ü
Red 3H01 TL 2 % b 40 ü ü ü ü ü ü ü ü
Red 3H25 TL 4 % b 40 30 25 ü ü ü ü ü ü
Red 3H55 TL 6 % b 40 ü ü ü ü ü ü ü ü
Red 3H67 TL 3 % b 40 30 25 ü ü ü ü ü ü
The colors shown here are only meant as a guideline. Please use our samples to determine the right color.
State October 2015
Solid Sheets | cast acrylic
8
1.1 PLEXIGLAS® GSColored
ReferenceFor further details see information section
On request• smaller quantities • other colors
Continuation see next page
TL translucent
TP transparent
a constant transmission for all thicknesses
b constant transmission for thicknesses of 3–10 mm
40 items with colored background are available from stock.
ücan be manufactured. Please inquire about delivery periods and minimum order quantities for these items.
Sheets
Color Number Color Transmission τD65Number of sheets per pallet (thickness in mm, size 3050 × 2030 mm)
Color 3 4 5 6 8 10 12 15 20
Blue 5C01 TP 5 % a 40 ü ü ü ü ü ü ü ü
Blue 5C18 TP 64 % a 40 ü 25 20 15 ü ü ü ü
Blue 5H01 TL 5 % b 40 ü ü ü ü ü ü ü ü
Blue 5H22 TL 8 % b 40 ü ü ü ü ü ü ü ü
Blue 5H48 TL 11 % b 40 ü ü ü ü ü ü ü ü
Blue 5H51 TL 5 % b 40 ü ü ü ü ü ü ü ü
Green (silikat) 6C03 TP 90 % a ü ü ü ü ü ü ü ü ü
Green 6C14 TP 9 % a ü ü ü ü ü ü ü ü ü
Green 6C77 TP 69 % a 40 ü 25 ü ü ü ü ü ü
Green 6H01 TL 7 % b 40 ü ü ü ü ü ü ü ü
Green 6H02 TL 12 % b 40 ü ü ü ü ü ü ü ü
Grey 7C14 TP 49 % a 40 30 25 ü ü ü ü ü ü
Umbra 7C22 TP 56% a 40 30 25 20 15 12 ü ü ü
Umbra 7C27 TP 20 % a 40 ü 25 20 15 ü ü ü ü
Grey 7C82 TP 49% a 40 30 25 20 15 ü ü ü ü
Grey 7C83 TP 21% a 40 30 25 20 15 12 ü ü ü
The colors shown here are only meant as a guideline. Please use our samples to determine the right color.
State October 2015
Solid Sheets | cast acrylic
9
1.1 PLEXIGLAS® GSColored
ReferenceFor further details see information section
On request• smaller quantities
• other thicknesses
• other colors
SheetsMinimum order quantity of sheets (thickness in mm, size 3050 × 2030 mm)
Other colors 3 4 5 6 8 10
No development necessary 45 45 45 45 45 45
Sheets
Color Number Color Transmission τD65Number of sheets per pallet (thickness in mm, size 3050 × 2030 mm)
Color 3 4 5 6 8 10 12 15 20
Grey 7H32 OP 0 % b 40 ü ü ü ü ü ü ü ü
Brown 8C01 TP 16 % a 40 ü 25 ü ü ü ü ü ü
Black (IR-transmitting) 9C20 OP 0% a 40 ü ü ü ü ü ü ü ü
Black 9H01 OP 0 % b 40 30 25 20 15 12 ü 8 6*
The colors shown here are only meant as a guideline. Please use our samples to determine the right color.* 3000 × 2000 mm
TP transparent
OP opaque
a constant transmission for all thicknesses
b constant transmission for thicknesses of 3–10 mm
40 items with colored background are available from stock.
ücan be manufactured. Please inquire about delivery periods and minimum order quantities for these items.
State October 2015
Solid Sheets | cast acrylic
10
1.1 PLEXIGLAS® GSFluorescent
ReferenceFor further details see information section
TL translucent
TP transparent
a constant transmission for all thicknesses
b constant transmission for thicknesses of 3–10 mm
ücan be manufactured. Please inquire about delivery periods and minimum order quantities for these items.
(former PLEXIGLAS® Fluorescent)
Sheets
Color Number Color Transmission τD65Number of sheets per pallet (thickness in mm, size 3050 × 2030 mm)
Color 3 4 5 6 8 10
Yellow 1C50 TP 88 % a ü ü ü ü ü ü
Orange 2C01 TP 61 % a 40 ü ü ü ü ü
Orange 2C50 TP 85 % a ü ü ü ü ü ü
Red 3C02 TP 27 % a 40 ü ü ü ü ü
Red 3C50 TP 86 % a ü ü ü ü ü ü
Blue 5C50 TP 85 % a 40 ü ü ü ü ü
Green 6C02 TP 89 % a 40 ü ü ü ü ü
The colors shown here are only meant as a guideline. Please use our samples to determine the right color.
State October 2015
Solid Sheets | cast acrylic
11
1.1 PLEXIGLAS® GSUV-transmitting(former PLEXIGLAS SUNACTIVE®)
Sheets
Color Number Transmission τD65Number of sheets per pallet (thickness in mm)
Color 3 4 5 6 8
Smooth surface
Clear 2458 TP 92% a ü ü ü ü ü
One matte surface
Clear 2458 SC TP 92% a ü ü ü ü ü
Reference• Application: Tanning bed canopies
Properties• UV-transmitting
TP transparent
a constant transmission for all thicknesses
ücan be manufactured. Please inquire about delivery periods and minimum order quantities for these items.
On request• 2458
• 3120 × 2120 mm; thickness 3 –8 mm• 2500 × 2050 mm; thickness 3 –8 mm
• 2458 SC2500 × 2050 mm; thickness 3 –8 mm
• smaller quantities
State October 2015 12
Solid Sheets | Clear, White and colored
1.1 PLEXIGLAS® GSInformation Section
PLEXIGLAS® GS clearThe figures given for light transmission are typical values that apply to all thicknesses.
The light transmission is measured according to test standard DIN 5036, Part 3. The values may vary depending on the type of measuring equipment used.
The material conforms to ISO 7823-1 and is UV-absorbing.
We supply cut-to-size sheets from size 100 × 25 mm (sheet) or 350 × 200 mm (block). Slight deviations from the ordered quantity are possible.
Special grades are made to order. The entire batch or a multiple thereof is delivered.
The delivered quantity may be less than ordered. We will be pleased to state minimum order quantities on request.Please state the required net number of sheets in your order.
PLEXIGLAS® GS whiteThe light transmission is given as a typical value for 3 mm thickness.
It is measured according to test standard DIN 5036, Part 3. The values may vary depending on the type of measuring equip-ment used.
The material conforms to ISO 7823-1 and is largely UV-absorbing; partially UV-transmitting in some grades at smaller thicknesses.
We supply cut-to-size sheets from size 100 × 25 mm. Slight deviations from the ordered quantity are possible.
The color may vary slightly from batch to batch.
The reverse side of translucent or opaque colored solid sheets may be slightly different from the controlled serviceside, which is marked with the grade.
Translucent and opaque (pigmented) grades may show slightly different bonding behavior on their top surface and on the reverse. It is recommended to perform prior tests.
Special grades are made to order. The entire batch or a multiple thereof is delivered.
Delivered quantity may be less than ordered. We will be pleased to state minimum order quantities on request.Please state the required net number of sheets in your order.
PLEXIGLAS® GS colored and fluorescentThe light transmission is given as a typical value for 3 mm thickness. It is measured according to test standard DIN 5036, Part 3. The values may vary depending on the type of measuring equip-ment used.
The material conforms to ISO 7823-1 and is largely UV- absorbing; partially UV-transmitting in some grades at smaller thicknesses.
We supply cut-to-size sheets from size 100 × 25 mm. Slight devi-ations from the ordered quantity are possible. The color may vary slightly from batch to batch.
The reverse side of translucent or opaque colored solid sheets may be slightly different from the controlled service side, which is marked with the grade.
Translucent and opaque (pigmented) grades may show slightly different bonding behavior on their top surface and on the reverse. It is recommended to perform prior tests.
Special grades are made to order. The entire batch or a multiple thereof is delivered. Delivered quantity may be less than ordered.
We will be pleased to state minimum order quantities on request. Please state the required net number of sheets in your order.
State October 2015 13
Solid Sheets | extruded acrylic
Clear
SheetsColor Number Transmission τD65
Number of sheets per pallet (thickness in mm, size 3050 × 2050 mm)
Color 1.5 2 2.5 3 4 5 6 8 10 12 15 20 25
Clear 0A000 TP 92 % a 80 60 ü 40 30 25 20 15 12 10 8 6 5
On request• smaller quantities
• hard coated on both sides
• Large sizes• extrusion width up to 2590 mm (depending on thickness)• variable lengths
• Greater lengths• up to 10 m in extrusion width 2050 mm• minimum order quantity 600 kg per length
• Untrimmed sheets (with extrusion edge)• sheet width at least 2090 mm in extrusion width 2050 mm• minimum order quantity 2 t per thickness• sheet width up to 2615 mm in large sizes (depending on thickness)
• Other thicknesses in extrusion width 2050 mm• ≤ 6 mm: minimum order quantity 5 t per thickness• > 6 to 25 mm: minimum order quantity 10 t per thickness
• HQ (High Quality)• higher optical quality (suitable for metallizing)• thicknesses 2–3 mm in extrusion width 2050 mm• minimum quantity 10 t and 5 t per thickness
• Cut-to-size sheets• possible from size 100 mm × 25 mm• Slight deviations from ordered quantity are possible
Reference• For further details see information section
Please take note of the statement in the information section on delivery of greater/smaller number of items manufactured to order!
TP transparent
a constant transmission for all thicknesses
40 items with colored background are available from stock.
ücan be manufactured. Please inquire about delivery periods and minimum order quantities for these items.
1.2 PLEXIGLAS® XT
30 Year Guarantee – PLEXIGLAS® no yellowing. Applies to all products listed above.
State October 2015 14
Solid Sheets | extruded acrylic
1.1 PLEXIGLAS® XTWhite
Sheets
Color Number Transmission τD65Number of sheets per pallet (thickness in mm, size 3050 × 2050 mm)
Color 2 2.5 3 4 5 6 8 10
White WN670 TL 78% c 60 ü 40 30 ü ü ü ü
White WN370 TL 44 % c ü ü 40 ü ü ü ü ü
White WN770 TL 45 % c 60 ü 40 30 25 ü ü ü
White WN070 TL 30 % c 60 ü 40 30 25 ü ü ü
White WN970 TL 24 % c ü ü 40 30 ü ü ü ü
White WN297 TL 3 % c ü ü 40 ü 25 ü ü ü
On request• smaller quantities
• Large sizes• extrusion width up to 2590 mm (depending on thickness)• variable lengths
• Greater lengths• up to 10 m in extrusion width 2050 mm• minimum order quantity 600 kg per length
• Untrimmed sheets (with extrusion edge)• sheet width at least 2090 mm in extrusion width 2050 mm• minimum order quantity 2 t per thickness• sheet width up to 2615 mm in large sizes can be manufactured
(depending on thickness)
• Other thicknesses in extrusion width 2050 mm2 to 10 mm: minimum order quantity 5 t per thickness
• Other white grades2 to 10 mm: minimum order quantity 10 t per grade and 5 t per thickness
• AR texture1.5 – 4 mm: in extrusion width 2050 mm from 10 t per grade and 5 t per thickness
• Cut-to-size sheets• usually possible from size 100 mm × 25 mm• Slight deviations from ordered quantity are possible.
Reference• For further details see information section
Please take note of the statement in the information section on delivery of greater/smaller number of items manufactured to order!
TL translucent
c transmission as a function of thickness
40 items with colored background are available from stock.
ücan be manufactured. Please inquire about delivery periods and minimum order quantities for these items.
State October 2015 15
Solid Sheets | extruded acrylic
1.1 PLEXIGLAS® XTColored
Sheets
Color Number Color Transmission τD65Number of sheets per pallet (thickness in mm, size 3050 × 2050 mm)
Color 2 2.5 3 4 5 6 8 10
Yellow 1N870 TL 22% c ü ü 40 ü ü ü ü ü
Yellow 1N270 TL 17 % c ü ü 40 ü ü ü ü ü
Cream 1N370 TL 28 % c ü ü ü ü ü ü ü ü
Orange 2N170 TL 6 % c ü ü 40 ü ü ü ü ü
Red 3N570 TL 2 % c ü ü 40 ü ü ü ü ü
Red 3N670 TL 2 % c ü ü 40 ü ü ü ü ü
Blue 5N870 TL 5% c ü ü 40 ü ü ü ü ü
Blue 5N370 TL 7% c ü ü 40 ü ü ü ü ü
The colors shown here are only meant as a guideline. Please use our samples to determine the right color.
On request• smaller quantities
• Greater lengths• up to 10 m in extrusion width 2050 mm• minimum order quantity 600 kg per length
• Untrimmed sheets (with extrusion edge)• sheet width at least 2090 mm in extrusion width 2050 mm• minimum order quantity 2 t per thickness• sheet width up to 2615 mm in large sizes can be manufactured
(depending on thickness)
• Other thicknesses in extrusion width 2050 mm2 to 10 mm: minimum order quantity 5 t per thickness
• Other colors2 to 10 mm: minimum order quantity 10 t per grade and 5 t per thickness
• AR texture1.5 – 4 mm: in extrusion width 2050 mm from 10 t per grade and 5 t per thickness
• Cut-to-size sheets• usually possible from size 100 mm × 25 mm• Slight deviations from ordered quantity are possible.
Reference• For further details see information section
Please take note of the statement in the information section on delivery of greater/smaller number of items manufactured to order!
Continuation see next page
TL translucent
c transmission as a function of thickness
40 items with colored background are available from stock.
ücan be manufactured. Please inquire about delivery periods and minimum order quantities for these items.
State October 2015 16
Solid Sheets | extruded acrylic
1.1 PLEXIGLAS® XTColored
Sheets
Color Number Color Transmission τD65Number of sheets per pallet (thickness in mm, size 3050 × 2050 mm)
Color 2 2.5 3 4 5 6 8 10
Green 6A112 TP 91 % c ü ü ü ü ü ü ü ü
Green 6N570 TL 19 % c ü ü 40 ü ü ü ü ü
Brown 8A470 TP 62 % c ü ü ü ü ü ü ü ü
Brown 8A570 TP 14 % c ü ü 40 ü ü ü ü ü
Brown 8A870 TP 52 % c ü ü ü ü ü ü ü ü
Grey 7A670 TP 71 % c ü ü 40 ü ü ü ü ü
Black 9N870 OP 0 % c 60 ü 40 ü 25 20 15 12
The colors shown here are only meant as a guideline. Please use our samples to determine the right color.
TP transparent
TL translucent
OP opaque
c transmission as a function of thickness
40 items with colored background are available from stock.
ücan be manufactured. Please inquire about delivery periods and minimum order quantities for these items.
On request• smaller quantities
• Greater lengths• up to 10 m in extrusion width 2050 mm• minimum order quantity 600 kg per length
• Untrimmed sheets (with extrusion edge)• sheet width at least 2090 mm in extrusion width 2050 mm• minimum order quantity 2 t per thickness• sheet width up to 2615 mm in large sizes can be manufactured
(depending on thickness)
• Other thicknesses in extrusion width 2050 mm2 to 10 mm: minimum order quantity 5 t per thickness
• Other colors2 to 10 mm: minimum order quantity 10 t per grade and 5 t per thickness
• AR texture1.5 – 4 mm: in extrusion width 2050 mm from 10 t per grade and 5 t per thickness
• Cut-to-size sheets• usually possible from size 100 mm × 25 mm• Slight deviations from ordered quantity are possible
Reference• For further details see information section
Please take note of the statement in the information section on delivery of greater/smaller number of items manufactured to order!
State October 2015 17
Solid Sheets | extruded acrylic
1.1 PLEXIGLAS® XTUV-transmitting
Reference• The entire batch is delivered; quantities of up to +/–10 %
over or under the order may be supplied.
(former PLEXIGLAS SUNACTIVE®)
Sheets
Color Number Transmission τD65Number of sheets per pallet (thickness in mm, size 3050 × 2050 mm)
Color 2 3 4 5 6 8
For tanning bed canopies
Clear 0A770 TP 92 % a ü ü – – – –
For architectural glazing
Clear 0A370 TP 92 % a – – ü ü ü ü
The light transmission is measured according to test standard DIN 5036, Part 3. The values may vary depending on the type of measuring equipment used.
TP transparent
a constant transmission for all thicknesses
ücan be manufactured. Please inquire about delivery periods and minimum order quantities for these items.
On request• minimum order quantities
State October 2015 18
Solid Sheets | Acrylic for maximum UV protection, extruded
1.1 PLEXIGLAS® XTUV 100
Sheets
Color Number Transmission τD65Number of sheets per pallet (thickness in mm, size 3050 × 2050 mm)
Color/Grade 1.5 2 2.5 3 4 5 6
Clear UV 100 0A570 TP 92 % a ü ü ü 40 ü ü ü
Clear UV 100 AR (non-glare) 0A570 AR TP 92 % a 80 60 ü 40 ü ü ü
The light transmission is measured according to test standard DIN 5036, Part 3. The values may vary depending on the type of measuring equipment used.
On request• smaller quantities
• Sheets hard coated on one side see PLEXIGLAS® Optical
• Greater lengths for UV 100 and UV 100 AR• up to 10 m in extrusion width 2050 mm• minimum order quantity 600 kg per length
• Untrimmed sheets UV 100 and UV 100 AR (with extrusion edge)• sheet width at least 2090 mm, in extrusion width 2050 mm• minimum order quantity 2 t per thickness
• Other thicknesses for UV 100 and UV 100 AR: 1.5 to 6 mm Minimum quantity 5 t per thickness (at thicknesses of 4 mm or greater, the AR’s surface is less defined)
TP transparent
a constant transmission for all thicknesses
40 items with colored background are available from stock.
ücan be manufactured. Please inquire about delivery periods and minimum order quantities for these items.
PLEXIGLAS® UV 100 is an extremely weather-resistant and transparent extruded sheet material with the highest UV-protection.
(former PLEXIGLAS Gallery®)
State October 2015 19
Solid Sheets | Clear, White and colored
1.1 PLEXIGLAS® XTInformation Section
PLEXIGLAS® XT clearThe figures given for light transmission are typical values that apply to all thicknesses. The light transmission is measured according to test standard DIN 5036, Part 3. The values may vary depending on the type of measuring equipment used.
The material conforms to ISO 7823-2, is transparent, UV-absorbing (partially UV-transmitting at less than approx. 5 mm thickness), with two smooth, high-gloss surfaces.
Special grades are made to order. The entire batch is delivered; quantities of up to +/–10 % over or under the order may be supplied.
PLEXIGLAS® XT whiteThe light transmission is given as a typical value for 3 mm thickness; sheets become more opaque with increasing thickness. The light transmission is measured according to test standard DIN 5036, Part 3. The values may vary depending on the type of measuring equipment used.
All grades conform to ISO 7823-2.
Special grades are made to order. The entire batch is delivered; quantities of up to +/–10 % over or under the order may be supplied.
Both surfaces are smooth and glossy, but degree of gloss different on reverse side due to pigment distribution.
The color may vary slightly from batch to batch. The reverse side of solid translucent or opaque colored sheets may differ slightly from the controlled service side, which is marked with the grade.
Translucent grades are light-diffusing and largely UV-absorbing; some grades are partially UV-transmitting in small thicknesses.
Opaque grades are UV-absorbing.
PLEXIGLAS® XT coloredThe light transmission is given as a typical value for 3 mm thickness; sheets become more opaque with increasing thickness. The light transmission is measured according to test standard DIN 5036, Part 3. The values may vary depending on the type of measuring equipment used.
All grades conform to ISO 7823-2.
Special grades are made to order. The entire batch is delivered; quantities of up to +/–10 % over or under the order may be supplied.
Both surfaces are smooth and glossy, but degree of gloss different on reverse side due to pigment distribution.
The color may vary slightly from batch to batch. The reverse side of solid translucent or opaque colored sheets may differ slightly from the controlled service side, which is marked with the grade.
Translucent grades are light-diffusing and largely UV-absorbing; some grades are partially UV-transmitting in small thicknesses.
Translucent and opaque grades are UV-absorbing.
State October 2015 20
Solid Sheets | Extruded acrylic for heat protection
1.3 PLEXIGLAS® Heatstop
Sheets
Color Number Transmission τD65Number of sheets per pallet (thickness in mm, size 3050 × 2050 mm)
Color 2.5 3 4 5 6 8
Opal WZ001 TL 45 % b ü 40 ü ü ü ü
The light transmission is measured according to test standard DIN 5036, Part 3. The values may vary depending on the type of measuring equipment used.
On request• smaller quantities
Reference• Greater lengths
• up to 10 m in extrusion width 2050 mm• minimum quantity 10 sheets or 600 kg per length
• Untrimmed sheets (with extrusion edge)• sheet width at least 2090 mm in extrusion width 2050 mm• minimum order quantity 2 t per thickness
• Other thicknesses in extrusion width 2050 mm2.5 to 8 mm: minimum order quantity 5 t per thickness
TL translucent
b constant transmission for thicknesses of 3–10 mm
40 items with colored background are available from stock.
ücan be manufactured. Please inquire about delivery periods and minimum order quantities for these items.
(former PLEXIGLAS HEATSTOP® XT)
State October 2015 21
Solid Sheets | Extruded acrylic
1.4 PLEXIGLAS® Hi-Gloss
On request• smaller quantities
• Greater lengths• up to 10 m in extrusion width 2050 mm• minimum quantity 600 kg per length
• Other thicknesses in extrusion width 2050 mm2 to 10 mm: minimum order quantity 5 t per thickness
• Other colors 2 to 10 mm: minimum quantity 10 t per grade and 5 t per thickness
• Cut-to-size sheets• usually possible from size 100 mm × 25 mm• Slight deviations from ordered quantity are possible
• Colors silver-black-silver (7M802 C2) or gold-black-gold (2M802 C2)
40 items with colored background are available from stock.
ücan be manufactured. Please inquire about delivery periods and minimum order quantities for these items.
– not available
Sheets
Color Number Color SampleNumber of sheets per pallet (thickness in mm, size 3050 × 2050 mm)
Color 2 3 4 5 6 8 10
White WM596 C1 – 40 ü ü 20 ü ü
Latte 1M595 C1 – ü ü ü ü ü ü
Lemon 1M800 C1 – ü ü ü 20 ü ü
Gold 2M801 C1 – ü ü ü ü ü ü
Red 3M571 C1 – ü ü ü 20 ü ü
Ocean 5M800 C1 – ü ü ü 20 ü ü
Pistachio 6M530 C1 – ü ü ü 20 ü ü
Silver-White 7M501 C1 – 40 ü ü 20 ü ü
Anthracite 7M896 C1 – ü ü ü 20 ü ü
Taupe 8M503 C1 – ü ü ü ü ü ü
Espresso 8M800 C1 – ü ü ü ü ü ü
Black 9M871 C1 – ü ü ü 20 ü ü
PLEXIGLAS® Hi-Gloss C1 grades have a colored acrylic layer on one side and a clear-transparent PLEXIGLAS® core. PLEXIGLAS® Hi-Gloss C2 grades with a colored acrylic core and a layer of clear transparent coating on both sides can be manufactured.
Both grades of acrylic sheet are obtained by a coextrusion process that permanently fuses up to three independent melt streams of high-quality PLEXIGLAS® providing a high gloss surface with an incom-parable deep-view color effect.
State October 2015 22
Solid Sheets | cast acrylic, LED-optimized
1.5 PLEXIGLAS® LEDFor back lighting
Continuation see next page
On request• smaller quantities • other colors
TL translucent
a constant transmission for all thicknesses
b constant transmission for thicknesses of 3–10 mm
c transmission as a function of thickness
40 items with colored background are available from stock.
ücan be manufactured. Please inquire about delivery periods and minimum order quantities for these items.
– not available
(former PLEXIGLAS truLED®)
Sheets
Color Number Color Transmission τD65Number of sheets per pallet (thickness in mm, size 3050 × 2030 mm)
Color 3 4 5 6 8 10
White WH72 TL 31% b 40 30 25 ü ü ü
White WH14 TL 47 % b 40 ü 25 ü ü ü
Yellow 1H74 TL 26 % b ü ü ü ü ü ü
Orange 2H41 TL 9% b 40 ü ü ü ü ü
Red 3H68 TL 7% b 40 ü ü ü ü ü
Blue 5H28 TL 12 % b 40 ü ü ü ü ü
Green 6H18 TL 19 % b 40 ü ü ü ü ü
The colors shown here are only meant as a guideline. Please use our samples to determine the right color.
Blocs for routed letters
Color Number Color Transmission τD65Number of sheets per pallet (thickness in mm, size 3050 × 2030 mm)
Color 12 15 20 25 30 * 40 *
White WM51 TL 22% c ü 8 6 ü 4 ü
White WH51 TL 22 % a ü 8 6 ü – –
The colors shown here are only meant as a guideline. Please use our samples to determine the right color.* 3000 × 2000 mm
State October 2015 23
Solid Sheets | color changing
1.1 PLEXIGLAS® LEDFor back lighting
Sheets
Color Number Color Transmission τD65Number of sheets per pallet (thickness in mm, size 3050 × 2030 mm)
Color 3 4 5 6 8 10 12 15 20
Black & White IIBlack & White Effekt (white in transmitted light, black in incident light) 9H04 SC TL 18 % b 40 ü ü ü ü ü ü ü ü
Black & White IBlack & White Effekt (white in transmitted light, black in incident light) 7H25 TL 13 % b 40 ü ü ü ü ü ü ü ü
Grey & WhiteBlack & White Effekt (white in transmitted light, grey in incident light) 7H01SC TL 21 % b ü ü ü ü ü ü ü ü ü
The colors shown here are only meant as a guideline. Please use our samples to determine the right color.
Continuation see next page
On request• smaller quantities
TL translucent
b constant transmission for thicknesses of 3–10 mm
40 items with colored background are available from stock.
ücan be manufactured. Please inquire about delivery periods and minimum order quantities for these items.
– not available
(former PLEXIGLAS® Dual Color)
State October 2015 24
Solid Sheets | LED luminaires, optimized, coextruded
1.1 PLEXIGLAS® LEDFor back lighting
Sheets
Color Number Color Transmission τD65Number of sheets per pallet (thickness in mm, size 3050 × 2050 mm)
Color 2 3 4 5 6 8 10
Clear 0M200 SC TL 58% b ü 40 ü ü ü ü ü
On request• smaller quantities
• Greater lengths• up to 10 m in extrusion width 2050 mm• minimum quantity 600 kg per length
• Untrimmed sheets (with extrusion edge)• sheet width at least 2090 mm in extrusion width 2050 mm• minimum order quantity 2 t per thickness
• Other thicknesses in extrusion width 2050 mm2 to 10 mm: minimum order quantity 5 t per thickness
• Other colors 2 to 10 mm: minimum quantity 10 t per grade and 5 t per thickness
• Impact-modified grades2 to 10 mm: minimum order quantity 10 t per grade and 5 t per thickness
• Cut-to-size sheets• usually possible from size 100 mm × 25 mm• Slight deviations from ordered quantity are possible
TL translucent
b constant transmission for thicknesses of 3–10 mm
40 items with colored background are available from stock.
ücan be manufactured. Please inquire about delivery periods and minimum order quantities for these items.
State October 2015 25
Solid Sheets | light guiding, clear, extruded
1.1 PLEXIGLAS® LEDFor edge lighting
Sheets
Color Number Transmission τD65Number of sheets per pallet (thickness in mm, size 3050 × 2050 mm)
Color 3 4 5 6 8 10 12 15
PLEXIGLAS® LED, extruded
Clear 0E010 SM TP 92 % ü 30 ü ü ü ü ü ü
Clear 0E011 L TP 92 % ü ü ü 20 15 ü ü ü
Clear 0E012 XL TP 92 % ü ü ü ü 15 12 ü ü
Clear 0E013 XXL TP 92 % ü ü ü ü ü 12 ü ü
PLEXIGLAS® LED HC, extruded, hard coated
Clear 0E010 HC TP 92 % ü ü ü ü ü ü – –
Clear 0E011 HC TP 92 % ü ü ü 20 ü ü – –
Clear 0E012 HC TP 92 % ü ü ü ü 15 12 – –
Clear 0E013 HC TP 92 % ü ü ü ü ü ü – –
The light transmission is measured according to test standard DIN 5036, Part 3. The values may vary depending on the type of measuring equipment used.
On request• other thicknesses
• smaller quantities
• Greater lengths for extruded grades• up to 6000 mm in extrusion width 2050 mm• minimum quantity 600 kg per length
• Untrimmed sheets (with extrusion edge)• sheet width at least 2090 mm in extrusion width 2050 mm• minimum order quantity 2 t per thickness
TP transparent
40 items with colored background are available from stock.
ücan be manufactured. Please inquire about delivery periods and minimum order quantities for the other items.
– not available
(former PLEXIGLAS® EndLighten T)
State October 2015 26
Solid Sheets | cast acrylic
1.1 PLEXIGLAS® LEDFor side lighting
Sheets
Color Number Transmission τD65Number of sheets per pallet (thickness in mm, size 3050 × 2030 mm)
Color 3 4 5 6 8 10
White WH46 SC TP 40% b 40 ü 25 ü ü ü
On request• smaller quantities
TP transparent
b constant transmission for thicknesses of 3–10 mm
40 items with colored background are available from stock.
ücan be manufactured. Please inquire about delivery periods and minimum order quantities for these items.
State October 2015 27
Solid Sheets | Acrylic solid surface material
1.6 PLEXIGLAS® Mineral3D-Thermo forming, for interior fittings and facade
BV
Sheets
Color NumberNumber of sheets per pallet (thickness in mm, size 3050 × 2030 mm)
Number of sheets per pallet (thickness in mm, size 2000 × 1000 mm)
Color 6 8 10 12 6 8 10 12
White WBV00 15 ü 10 ü 45 ü 30 ü
Artic White WBV03 15 10 10 ü 45 30 30 ü
Beige 1BV00 ü ü ü ü ü ü ü ü
Traffic Yellow 1BV01 ü ü ü ü ü ü ü ü
Traffic Red 3BV00 ü ü ü ü ü ü ü ü
Blue 5BV00 ü ü ü ü ü ü ü ü
Pigeon Blue 5BV01 ü ü ü ü ü ü ü ü
Light Green 6BV00 ü ü ü ü ü ü ü ü
Green 6BV01 ü ü ü ü ü ü ü ü
Grey White 7BV00 ü ü ü ü ü ü ü ü
Grey Blue 7BV25 ü ü ü ü ü ü ü ü
Black 9BV00 15 ü 10 ü 45 ü 30 ü
Standard surface SC
On request• special size 4050 × 2030 × 12 mm and colors for individual projects • smooth surface
40 items with colored background are available from stock. ü can be manufactured. Please inquire about delivery periods and minimum order quantities for these items.
Continuation see next page
(former PLEXICOR® FreeStyle and Xkin)
Reference• The back side is always smooth and is not the service side!
State October 2015 28
Solid Sheets | Acrylic solid surface material
1.1 PLEXIGLAS® Mineralfor interior fittings and facade
NF
Sheets
Color NumberNumber of sheets per pallet (thickness in mm, size 3050 × 2030 mm)
Number of sheets per pallet (thickness in mm, size 2000 × 1000 mm)
Color 6 8 10 12 6 8 10 12
White WNF00 15 ü 10 ü 45 ü 30 ü
Artic White WNF03 15 ü 10 ü 45 ü 30 ü
Beige 1NF00 ü ü ü ü ü ü ü ü
Traffic Yellow 1NF01 ü ü ü ü ü ü ü ü
Traffic Red 3NF00 ü ü ü ü ü ü ü ü
Blue 5NF00 ü ü ü ü ü ü ü ü
Pigeon Blue 5NF01 ü ü ü ü ü ü ü ü
Light Green 6NF00 ü ü ü ü ü ü ü ü
Green 6NF01 ü ü ü ü ü ü ü ü
Grey White 7NF00 ü ü ü ü ü ü ü ü
Grey Blue 7NF25 ü ü ü ü ü ü ü ü
Black 9NF00 15 ü 10 ü 45 ü 30 ü
Standard surface SC
On request• special size 4050 × 2030 × 12 mm and colors for individual projects • smooth surface
40 items with colored background are available from stock. ü can be manufactured. Please inquire about delivery periods and minimum order quantities for these items.
(former PLEXICOR® Xkin)
Reference• The back side is always smooth and is not the service side!
State October 2015 29
Solid Sheets | Extruded acrylic
1.7 PLEXIGLAS® Optical High purity
Sheets
Color Number Transmission τD65Number of sheets per pallet (thickness in mm, size 1850 × 1250 mm)
Color 0.8 1.0 1.2 1.5
Clear 0Z003 TP 92 % a ü ü ü ü
The light transmission is measured according to test standard DIN 5036, Part 3. The values may vary depending on the type of measuring equipment used.
On request• Minimum quantity/manufactured to order 5 tons
TP transparent
a constant transmission for all thicknesses
ücan be manufactured. Please inquire about delivery periods and minimum order quantities for these items.
(former PLEXIGLAS® Superclear)
State October 2015 30
Solid Sheets | Extruded acrylic
1.1 PLEXIGLAS® OpticalHard coated
Sheets
Color Number Transmission τD65Number of sheets per pallet (thickness in mm, size 3050 × 2050 mm)
Color 2 3 4 5 6 8 10 12
Clear 0A570 HC TP 92% a 60 40 – – – – – –
Clear 0A000 HC TP 92% a – – 30 25 20 15 ü ü
The light transmission is measured according to test standard DIN 5036, Part 3. The values may vary depending on the type of measuring equipment used.
On request• smaller quantities
• Greater lengths up to 6 m in extrusion width 2050 mm
• Other grades with hard coating
• Special specifications for applications in the aviation industry (dust cover for windows)
Reference• Both grades are hard coated on one side
TP transparent
a constant transmission for all thicknesses
40 items with colored background are available from stock.
ücan be manufactured. Please inquire about delivery periods and minimum order quantities for these items.
– not available
The one-side surface treatment of PLEXIGLAS® Optical hard coated (HC) offers excellent resistance to abrasion and chemicals.
State October 2015 31
Solid Sheets | mirror, extruded acrylic
1.8 PLEXIGLAS® Reflections
Sheets
Color Number Transmission τD65Number of sheets per pallet (thickness in mm, size 3050 × 2050 mm)
Color 2 3 4 5
UV-absorbing, rear surface metallized and provided with protective coating
Silver 0Z025 0% 30 30 ü ü
Silver 0Z025 HC* 0% 30 30 – –
* Hard coating on one side
On request• smaller quantities
• other colors
• other sizes more suitable for cutting to size
Reference• The sheets are oversized. Prior to cutting them to size you should
consider whether the extra margin may be of use.
– not available40 items with colored background are available from stock.
ücan be manufactured. Please inquire about delivery periods and minimum order quantities for these items.
(former PLEXIGLAS® MIRROR)
PLEXIGLAS® Reflections are extruded polymethyl metacrylate (PMMA) sheets, with a one-side reflective mirror surface coating. An opaque back paint protects the coating. PLEXIGLAS® Reflections is also available with a one-side hard coat surface.
State October 2015 32
Solid Sheets | impact resistant, extruded acrylic
1.9 PLEXIGLAS® ResistExtruded acrylic
Sheets
Color Number Transmission τD65Number of sheets per pallet (thickness in mm, size 3050 × 2050 mm)
Typ / Color 2 3 4 5 6 8 10 12 15
- 45 / Clear 0RA45 TP 91% a 60 40 30 25 20 15 ü ü ü
- 65 / Clear 0RA65 TP 91% a ü 40 30 25 20 ü ü ü ü
- 75 / Clear 0RA75 TP 91% a 60 40 30 25 20 15 ü ü ü
-100 / Clear 0RA00 TP 91% a ü ü ü ü ü ü ü ü ü
- 65 / White WRN65 TL 32% c ü 40 30 25 ü ü ü ü ü
The light transmission is measured according to test standard DIN 5036, Part 3. The values may vary depending on the type of measuring equipment used.
On request• smaller quantities
• Greater lengths• up to 10 m in extrusion width 2050 mm• minimum order quantity 600 kg per length
• Untrimmed sheets (with extrusion edge)• sheet width at least 2090 mm in extrusion width 2050 mm• minimum order quantity 2 t per thickness
• Other thicknesses in extrusion width 2050 mm• 2–6 mm Clear and standard White:
minimum order quantity 5 t per grade and 5 t per thickness• > 6 –15 mm Clear and transparent color:
minimum order quantity 10 t per grade and 10 t per thickness• > 6 –15 mm standard White:
minimum order quantity 25 t per grade and 10 t per thickness
• Other colors (colored and White)• 2– 6 mm (TP/TL/OP-colors and White):
minimum order quantity 10 t per grade and 5 t per thickness • > 6 –15 mm ( TP-color):
Mindestmenge 10 t je Sorte und 10 t je Dicke• > 6 –15 mm (TL/OP-colors and White):
minimum order quantity 25 t per grade and 10 t per thickness
• Other degrees of impact strength• 2–6 mm Clear and standard White:
minimum order quantity 5 t per grade and 5 t per thickness • 2–6 mm (TP/TL/OP-colors and White):
minimum order quantity 10 t per grade and 5 t per thickness • > 6 –15 mm Clear and TP-color:
minimum order quantity 10 t per grade and 10 t per thickness • > 6 –15 mm (TL/OP-colors and White):
minimum order quantity 25 t per grade and 10 t per thickness
• AR structur (1,5 – 4 mm)• Clear and standard White:
minimum order quantity 5 t per grade and 5 t per thickness• (TP/TL/OP-colors and White):
minimum order quantity 10 t per grade and 5 t per thickness
• Cut-to-size sheets• usually possible from size 100 mm × 25 mm• Slight deviations from ordered quantity are possible
TP transparent
a constant transmission for all thicknesses
c transmission as a function of thickness
40 items available from stock
ücan be manufactured. Please inquire about delivery periods and minimum order quantities for these items.
TL translucent
(former PLEXIGLAS RESIST®)
30 Year Guarantee – PLEXIGLAS® no yellowing. Applies to the following products:
• PLEXIGLAS® Resist – extruded acrylicClear, all types
State October 2015 33
Solid Sheets | impact resistant, cast acrylic
1.1 PLEXIGLAS® ResistCast acrylic
Sheets
Color Number Transmission τD65Number of sheets per pallet (thickness in mm, size 3050 × 2030 mm)
Typ / Color 3 4 5 6
- HP / Clear 0R01 TP 92% a ü ü ü ü
- HP / Grey 7R04 TP 27% a ü ü ü ü
- HP / Grey 7R05 TP < 1% a ü ü ü ü
-HP / Grey 7R07 TP 37 % a ü ü ü ü
The light transmission is measured according to test standard DIN 5036, Part 3. The values may vary depending on the type of measuring equipment used.
On request• minimum order quantities
• other colors
• satin surface on one side (“SC”) or both sides (“DC”)
Reference• impact-modified (impact strength to Charpy 40 kJ/m²)
• for applications in tradeshow booths and store fixtures, motorcycle windshields, signage, barrel vaults,protective glazing etc.
• chemical resistance like that of cast PMMA, greater than that of extruded (incl. impact-modified) PMMA
• large range of fabrication methods, high optical quality
• UV-absorbing
TP transparent
a constant transmission for all thicknesses
ücan be manufactured. Please inquire about delivery periods and minimum order quantities for these items.
(former PLEXIGLAS RESIST® HP)
30 Year Guarantee – PLEXIGLAS® no yellowing. Applies to the following products:
• PLEXIGLAS® Resist – cast acrylicClear
State October 2015 34
Solid Sheets | light diffusing, cast acrylic
1.10 PLEXIGLAS® SatiniceCast acrylic
On request• smaller quantities • other colors
TL translucent
TP transparent
OP opaque
a constant transmission for all thicknesses
b constant transmission for thicknesses of 3–10 mm
40 items with colored background are available from stock.
ücan be manufactured. Please inquire about delivery periods and minimum order quantities for these items.
– not available
Continuation see next page
(former PLEXIGLAS SATINICE®)
30 Year Guarantee – PLEXIGLAS® no yellowing. Applies to the following products:
• PLEXIGLAS® Satinice – cast acrylic, one satin surface Crystal
• PLEXIGLAS® Satinice – cast acrylic, two satin surfaces Crystal
Sheets
Color Number Color Transmission τD65Number of sheets per pallet (thickness in mm, size 3050 × 2030 mm)
Color 3 4 5 6 8 10 12 15 20
one satin surface
Crystal 0F00 SC TP 92 % a 40 30 25 20 15 12 – – –
Coconut WH02 SC TL 44 % b 40 ü 25 ü ü ü – – –
Black Panther 9H01 SC OP 0 % b 40 ü ü ü ü ü – – –
two satin surfaces
Crystal 0F00 DC TP 92 % a 40 30 25 20 15 12 ü 8 6
Coconut WH02 DC TL 44 % b ü ü ü 20 ü 12 ü ü ü
Snow WH10 DC TL 70 % b 40 30 25 20 15 12 ü 8 6
Sunshine 1H17 DC TL 41 % b ü ü ü 20 ü ü ü ü ü
Orange 2C02 DC TP 54 % a ü ü ü 20 ü ü ü ü ü
Mandarin 2H08 DC TL 39 % b ü ü ü 20 ü ü ü ü ü
Cherry 3C01 DC TP 4 % a ü ü ü 20 ü ü ü ü ü
Strawberry 3C04 DC TP 21 % a ü ü ü 20 ü ü ü ü ü
Indian Summer 3C13 DC TP 13 % a ü ü ü 20 ü ü ü ü ü
The colors shown here are only meant as a guideline. Please use our samples to determine the right color.
State October 2015 35
Solid Sheets | light diffusing, cast acrylic
1.1 PLEXIGLAS® SatiniceCast acrylic
On request• smaller quantities • other colors
TL translucent
TP transparent
a constant transmission for all thicknesses
b constant transmission for thicknesses of 3–10 mm
40 items with colored background are available from stock.
ücan be manufactured. Please inquire about delivery periods and minimum order quantities for these items.
(former PLEXIGLAS SATINICE®)
Sheets
Color Number Color Transmission τD65Number of sheets per pallet (thickness in mm, size 3050 × 2030 mm)
Color 3 4 5 6 8 10 12 15 20
two satin surfaces
Plum 4H01 DC TL 41 % b ü ü ü 20 ü ü ü ü ü
Lollipop 4H12 DC TL 49 % b ü ü ü ü ü ü ü ü ü
Sky Blue 5C01 DC TP 5 % a ü ü ü 20 ü ü ü ü ü
Ice Blue 5H03 DC TL 61 % b ü ü ü 20 ü ü ü ü ü
Laguna 5H74 DC TL 45 % b ü ü ü 20 ü ü ü ü ü
Ice Green 6C03 DC TP 90 % a ü ü ü 20 ü ü ü ü ü
Kiwi 6H07 DC TL 47 % b ü ü ü 20 ü ü ü ü ü
Grass 6H55 DC TL 46 % b ü ü ü 20 ü ü ü ü ü
Carbon 7C17 DC TP 2 % a ü ü ü 20 ü ü ü ü ü
Asfalto 7H08 DC TL 6 % b ü ü ü ü ü ü ü ü ü
Terra 8C01 DC TP 16 % a ü ü ü 20 ü ü ü ü ü
Graphit 9H02 DC TL 1 % b ü ü ü 20 ü ü ü ü ü
The colors shown here are only meant as a guideline. Please use our samples to determine the right color.
State October 2015 36
Solid Sheets | light diffusing, coextruded
1.1 PLEXIGLAS® SatiniceExtruded acrylic
Sheets
Color NumberTransmission τD65
Number of sheets per pallet (thickness in mm, size 3050 × 2050 mm)
Color 2 3 4 5 6 8 10
one satin surface
Crystal 0M033 SC TP 92% ü 40 ü ü ü ü ü
Snow WM513 SC TL 70% ü 40 ü ü ü ü ü
Black Panther 9M805 SC OP 0% ü 40 ü ü ü ü ü
two satin surfaces
Crystal 0M033 DC TP 92% ü ü ü ü ü ü ü
Snow WM513 DC TL 70% ü 40 ü ü ü ü ü
On request• smaller quantities
• Greater lengths• up to 10 m in extrusion width 2050 mm• minimum quantity 600 kg per length
• Untrimmed sheets (with extrusion edge)• sheet width at least 2090 mm in extrusion width 2050 mm• minimum order quantity 2 t per thickness
• Other thicknesses in extrusion width 2050 mm2 to 10 mm: minimum order quantity 5 t per thickness
• Other colors 2 to 10 mm: minimum quantity 10 t per grade and 5 t per thickness
• Impact-modified grades2 to 10 mm: minimum order quantity 10 t per grade and 5 t per thickness
• Cut-to-size sheets• generally possible from size 100 mm × 25 mm• slight deviations from ordered quantity are possible
TP transparent
TL translucent
OP opaque
40 items with colored background are available from stock.
ücan be manufactured. Please inquire about delivery periods and minimum order quantities for these items.
30 Year Guarantee – PLEXIGLAS® no yellowing. Applies to the following products:
• PLEXIGLAS® Satinice – extruded acrylic, one satin surface Crystal
• PLEXIGLAS® Satinice – extruded acrylic, two satin surfaces Crystal
State October 2015 37
Solid Sheets | extruded acrylic
1.1 PLEXIGLAS® SatiniceOptimally light diffusing
Sheets
Color Number Transmission τD65Number of sheets per pallet (thickness in mm, size 3050 × 2050 mm)
Color 1.5 2 2.5 3 4 5 6 8 10
Clear 0D010 DF TL 83 % c ü ü ü 20 ü ü ü ü ü
On request• smaller quantities
• Greater lengths• up to 10 m in extrusion width 2050 mm• minimum quantity 600 kg per length
• Untrimmed sheets (with extrusion edge)• sheet width at least 2090 mm in extrusion width 2050 mm• minimum order quantity 2 t per thickness
• Other thicknesses in extrusion width 2050 mm1.5 to 10 mm: minimum quantity 5 t per thickness
• Other colors1.5 to 10 mm: minimum quantity 10 t per grade and 5 t per thickness
• Impact-modified grades1.5 to 10 mm: minimum quantity 10 t per grade and 5 t per thickness
• Cut-to-size sheets• generally possible from size 100 mm × 25 mm• slight deviations from ordered quantity are possible
TL translucent
c transmission as a function of thickness
40 items with colored background are available from stock.
ücan be manufactured. Please inquire about delivery periods and minimum order quantities for these items.
(former PLEXIGLAS® Satin Ice)
State October 2015 38
Solid Sheets
1.1 PLEXIGLAS® SatiniceInformation section
PLEXIGLAS® Satinice – cast acrylicThe light transmission is given as a typical value for 3 mm thick-ness. Measurement is performed with the textured side facing the light source. If the textured side is turned away from the light source, the transmittance may be slightly lower due to the texture. Exact values cannot be measured for technical reasons.
The material conforms to ISO 7823-1 and is largely UV-absorbing; partially UV-transmitting in some grades at smaller thicknesses.
We supply cut-to-size sheets from size 100 × 25 mm. Slight deviations from ordered quantity are possible. The color may vary slightly from batch to batch.
The reverse side of translucent or opaquely colored solid sheets may differ slightly from the controlled service side that is marked with the grade.
Translucent and opaque (pigmented) grades may show slightly different bonding behavior on their top surface and on the reverse. It is recommended to perform prior tests.
Special grades are made to order. The entire batch or a multiple thereof is delivered.
The delivered quantity may be more than ordered.
Please state the net number of sheets required in your order. We will be pleased to state delivery periods, prices and other conditions on request.
PLEXIGLAS® Satinice – extruded acrylicThe light transmission is given as a typical value for 3 mm thickness.
It is measured according to test standard DIN 5036, Part 3. The values may vary depending on the type of measuring equipment used.
The material conforms to ISO 7823-2 and is largely UV-absorbing; partially UV-transmitting in some grades at smaller thicknesses.
We supply cut-to-size sheets from size 100 × 25 mm. Slight deviations from ordered quantity are possible. The color may vary slightly from batch to batch.
The reverse side of translucent or opaquely colored solid sheets may differ slightly from the controlled service side that is marked with the grade.
Special grades are made to order. The entire batch is delivered, quantities of up to +/–10 % over or under the order may be supplied.
Please state the net number of sheets required in your order. We will be pleased to state delivery periods, prices and other conditions on request.
(former PLEXIGLAS SATINICE® resp. PLEXIGLAS® Satin Ice)
State October 2015 39
Solid Sheets
1.11 PLEXIGLAS® Solar
PLEXIGLAS® Solar 0Z023 is an extruded acrylic sheet material (polymethyl methacrylate, PMMA) that is highly weather-resistant and transparent.
Sheets
Color Number Transmission τD65Number of sheets per pallet (thickness in mm, size 3050 × 2050 mm)
Color 3 4
Clear 0Z023 TP 92 % a ü ü
TP transparent
a constant transmission for all thicknesses
ücan be manufactured. Please inquire about delivery periods and minimum order quantities for these items.
Reference• Applications
• cover for light-weight solar thermal energy and photovoltaic modules• semi-finished material for hot embossing of radial and linear Fresnel lenses,
e. g. for concentrating photovoltaics
On request• other thicknesses • other sizes
State October 2015 40
Solid Sheets | wind and noise barrier
1.12 PLEXIGLAS® Soundstop
Properties• sound-reflecting, break-resistant, highly transparent• extruded or cast transparent grades• cast non-transparent grade • in Clear, seven transparent and five non-transparent colors• available with embedded polyamide threads for sliver retention• available with integrated bird-deterrent markings• various functional surfaces available• meet the requirements of ZTV-Lsw 06 (German regulations for
noise barriers along roads), EN 1793 and 1794
Physical formssolid sheets in 15, 20 and 25 mm (transparent elements) or 12 mm thickness (non-transparent elements)
(former PLEXIGLAS SOUNDSTOP®)
On request• special sizes • Quantities for the extruded version
State October 2015 41
Solid Sheets | textured extruded acrylic
1.13 PLEXIGLAS® Textures
Sheets
Color Number Transmission τD65 Color Sample Size in mmNumber of sheets per pallet (thickness in mm)
Decor 3 4 5 6 8
Clear Honeycomb 0A000 W TP 92 % c 2500 × 1650 40 ü ü ü ü
Clear Honeycomb 0A000 W TP 92 % c 2050 × 1650 30 ü ü ü ü
Clear Pearl 0A000 P TP 92 % c 2050 × 1650 30 ü ü ü ü
Clear Pyramid 0A000 Z TP 92 % c 2050 × 1650 30 ü ü ü ü
Clear Ribbed 0A000 R TP 92 % c 2050 × 1650 30 ü ü ü ü
Clear Raindrop/Pinspot 0A000 TK TP 92 % c 3050 × 2050 20 ü ü 10 ü
Brown Raindrop/Pinspot 8A470 TK TP 62 % c 3050 × 2050 ü ü ü ü ü
Clear Ice Crystal 0A000 E TP 92 % c 3050 × 2050 20 20 ü 10 ü
Brown Ice Crystal 8A470 E TP 62 % c 3050 × 2050 ü ü ü 10 ü
Grey Ice Crystal 7A007 E TP 75 % c 3050 × 2050 ü ü ü ü ü
Clear Bark 0A000 B TP 92 % c 3050 × 1650 ü 25 ü 20 ü
Clear Crimp 0A000 CL TP 92 % c 3050 × 1650 ü ü ü 20 ü
Brown Crimp 8A470 CL TP 44 % c 3050 × 1650 ü ü ü ü ü
The light transmission is given as a typical value for 3 mm thickness. Measurement is performed with the textured side facing the light source. If the textured side is turned away from the light source, the transmittance may be slightly lower due to the texture. Exact values cannot be measured for technical reasons. The light transmission is measured according to test standard DIN 5036, Part 3. The values may vary depending on the type of measuring equipment used. All grades conform to ISO 7823-2, are Light-diffusing, UV-absorbing, (slightly UV-transmitting at less than 3 mm thickness)
TP transparent
c transmission as a function of thickness
40 items with colored background are available from stock.
ücan be manufactured. Please inquire about delivery periods and minimum order quantities for these items.
On request• smaller quantities
• Other lengths from 1200 to 7500 mmminimum quantity 600 kg per length
• Untrimmed sheets (with extrusion edge)minimum quantity 2 t per thickness
• Other thicknesses from 3 to 8 mmminimum quantity 2 t per thickness
• Other surfaces e. g. C, T, K, Lminimum quantity 10 t per grade and 2 t per thickness
• Other colorsminimum quantity 5 t per grade and 2 t per thickness
• Other properties, e. g. impact strengthminimum quantity 5 t per grade and 2 t per thickness
(former PLEXIGLAS® Textured)
2.1 PLEXIGLAS® Resist – Rolls – Sheets
Films
Films
42
State October 2015
Films
43
2.1 PLEXIGLAS® ResistRolls
Continuation see next page
On request• Coloring • Minimum order quantity 5 t
PLEXIGLAS® Insert Film
Type Color Length Surface Masking topSurface bottom
Masking back Core Thickness Width Delivery
Packaging unit
99524 clear 1000 m gloss clear gloss blue transp. 152 mm 175 µm 1270 mm
make to order 20 rolls 1 roll
99524 clear 900 m gloss clear gloss blue transp. 152 mm 250 µm 1270 mm
make to order 15 rolls 1 roll
99524 clear 500 m gloss clear gloss blue transp. 152 mm 375 µm 1270 mm
stock product 1 roll 1 roll
99524 clear 500 m gloss clear gloss blue transp. 152 mm 500 µm 1270 mm
make to order 15 rolls 1 roll
99524 clear 200 m gloss clear gloss blue transp. 152 mm 750 µm 1270 mm
make to order 18 rolls 2 roll
99554 clear 450 m gloss clear gloss no 152 mm 125 µm 1143 mm
make to order 10 rolls 2 roll
0F003 clear 1000 m fine matt no gloss no 152 mm 250 µm 1270 mm
stock product 1 roll 1 roll
PLEXIGLAS® Light scattering Film
Type Color Length Surface Masking topSurface bottom
Masking back Core Thickness Width Delivery
Packaging unit
99547 white 500 m gloss blue transp. gloss no 152 mm 250 µm 1210 mm
stock product 2 rolls 2 rolls
State October 2015
Films
44
2.1 PLEXIGLAS® ResistRolls
On request• Coloring • Minimum order quantity 5 t
PLEXIGLAS® Lamination Film
Type Color Length Surface Masking topSurface bottom
Masking back Core Thickness Width Delivery
Packaging unit
99836 clear 2000 m gloss no gloss no 76 mm 50 µm 1340 mm
stock product 2 rolls 2 rolls
0F016 clear 1000 m gloss no gloss no 76 mm 75 µm 1270 mm
stock product 4 rolls 4 rolls
0F023CR clear 500 m CR-texture no CR-texture no 152 mm 150 µm 1060 mm
make to order 54 rolls 2 rolls
0F035T clear 500 m T-texture no T-texture no 152 mm 150 µm 1060 mm
make to order 54 rolls 2 rolls
0F008 clear 2000 m gloss no gloss no 152 mm 55 µm 1430 mm
stock product 2 rolls 2 rolls
0F011 clear 2050 m gloss no gloss no 76 mm 53 µm 1340 mm
stock product 4 rolls 4 rolls
0F014 clear 1000 m gloss no gloss no 76 mm 53 µm 1270 mm
stock product 2 rolls 2 rolls
0F016 clear 1000 m gloss no gloss no 152 mm 60 µm 1270 mm
stock product 4 rolls 4 rolls
0F032 clear 1000 m finematt no finematt no 76 mm 70 µm 1270 mm
stock product 2 rolls 2 rolls
0F032 clear 1000 m finematt no finematt no 76 mm 53 µm 1270 mm
stock product 2 rolls 2 rolls
WF002 white 1000 m gloss no gloss no 76 mm 50 µm 1270 mm
stock product 2 rolls 2 rolls
State October 2015
Films
45
2.1 PLEXIGLAS® ResistSheets
On request• Coloring • Minimum order quantity 5 t
PLEXIGLAS® Film, sheets
Type Color Length Surface Masking topSurface bottom
Masking back Core Thickness Width Delivery
Packaging unit
99524 clear1270 × 2150 mm gloss clear gloss blue transp. – 1.0 mm 1270 mm
stock product 200 sheets
200 sheets
99532 white1000 × 2050 mm gloss blue transp. gloss blue transp. – 0.5 mm 1000 mm
stock product 200 sheets
400 sheets
99532 white1000 × 2050 mm gloss blue transp. gloss blue transp. – 1.0 mm 1000 mm
make to order 5 tons
200 sheets
3.1 PLEXIGLAS® Alltop
3.2 PLEXIGLAS® Heatstop
3.3 PLEXIGLAS® Resist
Multi-Skin Sheets
Multi-Skin Sheets
......................... (former PLEXIGLAS ALLTOP®)
............. (former PLEXIGLAS HEATSTOP®)
........................... (former PLEXIGLAS RESIST®)
46
State October 2015 47
Multi-Skin Sheets | all around water-dispersing, highest light-transmission
3.1 PLEXIGLAS® Alltop
On request• Other colors
• Other lengths from 1000 mm and 10 sheets per length
• Additionally supplied in SDP 16/1053-64
• Minimum order quantities 2 tons
Reference• Alltop
In Alltop grade, the reliably water-dispersing NO DROP coating is applied to both surfaces and inside the cavities.
• The open ends of all sheets over 2000 mm long are closed by means of an adheasive PE Tape.
• PLEXIGLAS® multi-skin sheets less than 2000 mm long are supplied without end closure, but the stack of sheets on the pallet is packaged with dust-tight material
ücan be manufactured. Please inquire about delivery periods and minimum order quantities for these items.40
items with colored background are available from stock from March until October.
30 Year Guarantee – PLEXIGLAS® no yellowing. Applies to all products listed above.
(former PLEXIGLAS ALLTOP®)
Sheets
Color Number
Color Sample
NO DROP
Thick-ness (mm)
Webspacing (mm)
Width (mm)
Trans- mission τD65
Number of sheets per pallet (length in mm)
Color 2000 2500 3000 3500 4000 5000 6000 7000
SDP
Clear 29080
16 64 980 91 % ü ü 45 45 45 35 30 30
16 64 1200 91 % ü ü ü ü 35 30 25 ü
State October 2015 48
Multi-Skin Sheets | heat reflecting, extruded acrylic
3.2 PLEXIGLAS® Heatstop
On request• Other colors
• Other lengths from 1000 mm and 10 sheets per length
• Minimum order quantities 2 tons
Reference• Will be discontinued
PLEXIGLAS® Heatstop SDP 16 – Cool Blue WZ007
• The open ends of all sheets over 2000 mm long are closed by means of an adheasive PE Tape.
• PLEXIGLAS® multi-skin sheets less than 2000 mm long are supplied without end closure, but the stack of sheets on the pallet is packaged with dust-tight material.
• The color may vary slightly from batch to batch.
• AntiAlgaeApplication (AAA) The AAA coating, based on advanced nanotechnology, is a further development of the successful NO DROP coating, which has proven its worth over many years. It is directly applied to the sheet in an additional process during production. Due to the coating, algae, mosses, pollen, and other forms of soiling lose the ability to adhere to the sheet, and may even be immediately and completely decomposed, by the action of natural UV radiation from the sun. In combination with the well-known NO DROP effect, the next rainfall can almost completely rinse away the residues of the decomposed soiling.
• Opalescent Heatstop coating (Opal) The active substances are homogenously fused with the sheet material. They reduce heat buildup under the roof due to sunlight by up to 50 %. The opalescent color provides particularly uniform daylighting and has an iridescent effect. The color impression may vary according to the viewing angle and lighting conditions.
• Heatstop® Cool Blue Effect PLEXIGLAS® Heatstop Cool Blue multi-skin sheet uses a special technology for effectively reducing solar heat radiation. This effect is reinforced by a specially chosen color that people associate with pleasant temperatures, thus enhancing their well-being. The Heatstop Cool Blue coating gives the sheets an attractive golden surface sheen. Viewed from below, they have a pleasantly cool bluish tinge, as befits their function, with an iridescent effect. The color impression may vary depending on viewing angle and lighting conditions.
40 items with colored background are available from stock from March until October. ücan be manufactured. Please inquire about delivery periods and minimum order quantities for these items.
(former PLEXIGLAS HEATSTOP®)
Sheets
Color Number
Color Sample AAA
NO DROP
Thick-ness (mm)
Webspacing (mm)
Width (mm)
Trans- mission τD65
Number of sheets per pallet (length in mm)
Color 2000 2500 3000 3500 4000 5000 6000 7000
SDP 16
Cool Blue WZ007
16 32 980 20 % ü ü ü ü ü ü ü ü
16 32 1200 20 % ü ü ü ü ü ü ü ü
Cool Blue WZ030
16 64 980 20 % ü ü ü ü 45 35 30 30
16 64 1200 20 % ü ü ü ü 35 30 25 25
S5P
Opal WZ010 32 32 1230 35 % ü ü ü ü ü ü ü ü
Cool Blue WZ009 32 32 1230 18 % ü ü 20 ü 20 20 20 20
State October 2015 49
Multi-Skin Sheets | impact resistant, extruded acrylic
3.3 PLEXIGLAS® Resist
Continuation see next page
Reference• AntiAlgaeApplication (AAA)
The AAA coating, based on advanced nanotechnology, is a further development of the successful NO DROP coating, which has proven its worth over many years. It is directly applied to the sheet in an additional process during production. Due to the coating, algae, mosses, pollen, and other forms of soiling lose the ability to adhere to the sheet, and may even be immediately and completely decomposed, by the action of natural UV radiation from the sun. In combination with the well-known NO DROP effect, the next rainfall can almost completely rinse away the residues of the decomposed soiling.
• The open ends of all sheets over 2000 mm long are closed by means of an adheasive PE Tape.
• PLEXIGLAS® multi-skin sheets less than 2000 mm long are supplied without end closure, but the stack of sheets on the pallet is packaged with dust-tight materiall.
40 items with colored background are available from stock from March until October. ücan be manufactured. Please inquire about delivery periods and minimum order quantities for these items.
On request• Other colors
• Other lengths from 1000 mm and 10 sheets per length
• Minimum order quantities 2 tons
(former PLEXIGLAS RESIST®)
30 Year Guarantee – PLEXIGLAS® no yellowing. Applies to the following products:
• PLEXIGLAS® Resist SDP 16• Clear 0RS22• Clear 0RS22 C
Sheets
Color Number
Color Sample AAA
Thick-ness (mm)
Web spacing (mm)
Width (mm)
Trans- mission τD65
Number of sheets per pallet (length in mm)
Color 2000 2500 3000 3500 4000 5000 6000 7000
SDP 16
Clear 0RS22
16 32 980 83 % ü ü ü ü ü ü ü ü
16 32 1200 83 % ü ü ü ü ü ü ü ü
Clear 0RS22 C
16 32 980 83 % ü ü ü ü ü ü ü ü
16 32 1200 83 % ü ü ü ü ü ü ü ü
White WRS22
16 32 980 74 % ü ü ü ü ü ü ü ü
16 32 1200 74 % ü ü ü ü ü ü ü ü
Grey 7RS22
16 32 980 45 % ü ü ü ü ü ü ü ü
16 32 1200 45 % ü ü ü ü ü ü ü ü
State October 2015 50
Multi-Skin Sheets | impact resistant, extruded acrylic
3.1 PLEXIGLAS® Resist
Continuation see next page
Reference• AntiAlgaeApplication (AAA)
The AAA coating, based on advanced nanotechnology, is a further development of the successful NO DROP coating, which has proven its worth over many years. It is directly applied to the sheet in an additional process during production. Due to the coating, algae, mosses, pollen, and other forms of soiling lose the ability to adhere to the sheet, and may even be immediately and completely decomposed, by the action of natural UV radiation from the sun. In combination with the well-known NO DROP effect, the next rainfall can almost completely rinse away the residues of the decomposed soiling.
• The open ends of all sheets over 2000 mm long are closed by means of an adheasive PE Tape.
• PLEXIGLAS® multi-skin sheets less than 2000 mm long are supplied without end closure, but the stack of sheets on the pallet is packaged with dust-tight material.
40 items with colored background are available from stock from March until October. ücan be manufactured. Please inquire about delivery periods and minimum order quantities for these items.
On request• Other colors
• Other lengths from 1000 mm and 10 sheets per length
• Minimum order quantities 2 tons
(former PLEXIGLAS RESIST®)
30 Year Guarantee – PLEXIGLAS® no yellowing. Applies to the following products:
• PLEXIGLAS® Resist SDP 16• Clear 0RS30• Clear 0RS30 C
Sheets
Color Number
Color Sample AAA
Thick-ness (mm)
Web spacing (mm)
Width (mm)
Trans- mission τD65
Number of sheets per pallet (length in mm)
Color 2000 2500 3000 3500 4000 5000 6000 7000
SDP 16
Clear 0RS30
16 64 980 86 % 45 45 45 45 45 35 30 30
16 64 1200 86 % 45 45 40 35 35 30 25 25
Clear 0RS30 C
16 64 980 85 % ü ü ü ü 45 35 30 ü
16 64 1200 85 % ü ü ü ü 35 ü 25 ü
White WRS30
16 64 980 74 % ü ü 45 45 45 35 30 30
16 64 1200 74 % ü ü 40 35 35 30 25 25
Grey 7RS30
16 64 980 45 % ü ü ü ü ü ü ü ü
16 64 1200 45 % ü ü ü ü ü ü ü ü
State October 2015 51
Multi-Skin Sheets | impact resistant, extruded acrylic
3.1 PLEXIGLAS® Resist
Reference• NO DROP coating
This coating applied to one side causes rainwater or condensation to form a film and flow off evenly. If the NO DROP surface is installed facing inwards, the formation of water droplets is suppressed. When installed facing outwards, the sheets are more easily cleaned by the rain. The coated side is marked at the edge and on the protective masking.
• The open ends of all sheets over 2000 mm long are closed by means of an adheasive PE Tape.
• PLEXIGLAS® multi-skin sheets less than 2000 mm long are supplied without end closure, but the stack of sheets on the pallet is packaged with dust-tight material.
40 items with colored background are available from stock from March until October. ücan be manufactured. Please inquire about delivery periods and minimum order quantities for these items.
On request• Other colors
• Other lengths from 1000 mm and 10 sheets per length
• Minimum order quantities 2 tons
(former PLEXIGLAS RESIST®)
30 Year Guarantee – PLEXIGLAS® no yellowing. Applies to the following products:
• PLEXIGLAS® Resist S4P Clear 00721
• PLEXIGLAS® Resist S5P Clear 00721
Sheets
Color Number
Color Sample
NO DROP
Thick-ness (mm)
Web spacing (mm)
Width (mm)
Trans- mission τD65
Number of sheets per pallet (length in mm)
Color 2000 2500 3000 3500 4000 5000 6000 7000
S5P
Clear 00721 32 32 1230 68 % ü ü ü ü 20 20 20 20
White WRS01 32 32 1230 45 % ü ü ü ü 20 20 20 20
Grey 7RS01 32 32 1230 41 % ü ü ü ü ü ü ü ü
Corrugated Sheets
Corrugated Sheets
4.1 PLEXIGLAS® Heatstop
4.2 PLEXIGLAS® Resist
............. (former PLEXIGLAS HEATSTOP®)
...................... (former PLEXIGLAS RESIST® and PLEXIGLAS® BASIC)
52
State October 2015 53
Corrugated Sheets | heat reflecting, extruded acrylic
On request• Other colors • Minimum order quantities 2 tons
4.1 PLEXIGLAS® Heatstop
Sheets
Color Number Color Sample Width (mm)
Transmission τD65
Number of sheets per pallet (length [direction of water flow] in mm)
Color 2000 2500 3000 3500 4000 5000 6000 7000
PLEXIGLAS® Heatstop WP 76/18/3
Opal WZ002 1045 52 % ü ü ü ü ü ü ü ü
Cool Blue WZ006 1045 22 % ü ü ü 50 40 30 30 ü
Thickness approx. 3 mm
Reference• Lengths of more than 4 m are storage lengths, not installation lengths!
• The color may vary slightly from batch to batch.
• Opalescent Heatstop coating (Opal)The active sub stances are homogenously fused with the sheet material. They reduce heat buildup under the roof due to sunlight by up to 50 %. The opalescent color provides particularly uniform daylighting and has an iridescent effect. The color impression may vary according to the viewing angle and lighting conditions. The coated side is marked on the edge and the protective masking.
• Heatstop Effect and ColorPLEXIGLAS® Heatstop Cool Blue WP 76/18 sheets use a special technology for effectively reducing solar heat radiation. This effect is reinforced by a specially chosen color that people associate with pleasant temperatures, thus enhancing their well-being. The Heatstop Cool Blue coating gives the sheets an attractive golden surface sheen. Viewed from below, they have a pleasantly cool bluish tinge, as befits their function. This color has an iridescent effect. The color impression may vary depending on the viewing angle and lighting conditions. In addition to these benefits, the Heatstop Cool Blue coating makes it possible to achieve interesting design and lighting effects in many applications.
40 items with colored background are available from stock from March until October. ücan be manufactured. Please inquire about delivery periods and minimum order quantities for these items.
(former PLEXIGLAS HEATSTOP®)
State October 2015 54
Corrugated Sheets | impact resistant, extruded acrylic
4.2 PLEXIGLAS® Resist
SheetsColor Number
Color Sample
Width (mm) Transmission τD65
Number of sheets per pallet (length [direction of water flow] in mm)
Color 2000 2500 3000 3500 4000 5000 6000 7000
PLEXIGLAS® Resist WP 76/18/3
Clear0A001 Smooth 1045 up to 92 % 60 60 60 50 40 30 30 ü
Clear 0A001 W 1045 up to 92 % 60 60 60 50 40 30 30 ü
Clear 0A001 C 1045 up to 92 % ü ü ü ü ü ü 30 ü
Grey7RW01 Smooth 1045 45 % ü ü ü ü ü ü ü ü
Grey 7RW01 W 1045 45 % ü ü ü ü ü ü ü ü
Grey 7RW01 C 1045 45 % ü ü ü ü ü ü ü ü
Brown 8A001 W 1045 55 % 60 60 60 50 40 30 30 ü
Brown 8A003 C 1045 75 % ü ü ü ü ü ü 30 ü
PLEXIGLAS® Resist WP and TP 76/18/1.8 *
Clear0R005 Smooth 1045 up to 92 % 100 100 100 – 50 ü ü ü
Clear 0R005 C 1045 up to 92 % ü ü ü – ü ü ü ü
Brown8R002 Smooth 1045 70 % ü ü ü – ü ü ü ü
Brown 8R002 C 1045 65 % ü ü ü – ü ü ü ü
Thickness approx. 3 mm* Thickness of the WP and TP 76/18/1.8 is approx. 1.8 mm
Reference• Lengths of more than 4 m are storage lengths, not installation lengths!
Continuation see next page
(former PLEXIGLAS RESIST® and PLEXIGLAS® BASIC)
30 Year Guarantee – PLEXIGLAS® no yellowing. Applies to the following products:
• PLEXIGLAS® Resist WP 76/18/3Clear 0A001 Smooth/W/C
• PLEXIGLAS® Resist WP und TP 76/18/1,8Clear 0R005 Smooth/C
On request• Other colors (minimum order quantity 5 t per grade) • Other lengths from 10 sheets
40 items with colored background are available from stock from March until October.
ücan be manufactured. Please inquire about delivery periods and minimum order quantities for these items.
– not available
State October 2015 55
4.1 PLEXIGLAS® Resist
Sheets
Color Number
Color Sample
Width (mm)
Trans-mission τD65
Number of sheets per pallet (length [direction of water flow] in mm)
Color 2000 2500 3000 3100 3300 3500 4000 5000 6000 7000
PLEXIGLAS® Resist WP 130/30/3
Clear0A001 Smooth 1000
up to 92 % ü ü ü ü ü ü ü ü ü ü
Clear 0A001 W 1000up to 92 % ü ü ü ü ü ü ü ü ü ü
PLEXIGLAS® Resist WP 177/51/3
Clear0A001 Smooth 920
up to 92 % ü 50 ü ü ü ü ü ü ü ü
Clear 0A001 W 920up to 92 % ü ü ü ü ü ü ü ü ü ü
Thickness approx. 3 mm
Corrugated Sheets | impact resistant, extruded acrylic
40 items with colored background are available from stock from March until October. ücan be manufactured. Please inquire about delivery periods and minimum order quantities for these items.
(former PLEXIGLAS RESIST®)
30 Year Guarantee – PLEXIGLAS® no yellowing. Applies to the following products:
• PLEXIGLAS® Resist WP 130/30/3Clear 0A001 Smooth/W
• PLEXIGLAS® Resist WP 177/51/3Clear 0A001 Smooth/W
On request• Other colors (minimum order quantity 5 t per grade) • Other lengths from 10 sheets
Reference• Lengths of more than 4 m are storage lengths, not installation lengths!
Tubes
Tubes
5.1 PLEXIGLAS® XT – Clear – White
5.2 PLEXIGLAS® Satinice
5.3 PLEXIGLAS® Special programme
............................................. (former PLEXIGLAS® Satin Ice)
56
State October 2015 57
Tubes | extruded acrylic
5.1 PLEXIGLAS® XTClear
Continuation see next page
40 items with colored background are available from stock
30 Year Guarantee – PLEXIGLAS® no yellowing. Applies to all products listed above.
Tubes – Clear 0A070
Diameter in mm
Wallthicknessin mm
Weight at nom.dim.kg/m Tolerance in mm
Quantity delivered. units per small pack (lenght in mm)
Quantity delivered. units per large pack (lenght in mm)
outer inner Outer diameter Wall thickness Length 2000 2000
5 3 1 0.015 ± 0.3 ± 0.20 – 0/+5 50 200
6 3.5 1.25 0.022 ± 0.3 ± 0.20 – 0/+5 50 200
6.5 4 1.25 0.025 ± 0.3 ± 0.20 – 0/+5 50 200
7 5 1 0.022 ± 0.3 ± 0.20 – 0/+5 50 200
8 4 2 0.045 ± 0.3 ± 0.30 – 0/+5 50 200
10
7 1.5 0.048 ± 0.3 ± 0.20 – 0/+5 50 100
6 2 0.060 ± 0.3 ± 0.25 – 0/+5 50 100
4 3 0.078 ± 0.3 ± 0.30 – 0/+5 50 100
12
10 1 0.041 ± 0.3 ± 0.20 – 0/+5 50 100
8 2 0.075 ± 0.3 ± 0.25 – 0/+5 50 100
6 3 0.101 ± 0.3 ± 0.30 – 0/+5 50 100
13
10 1.5 0.064 ± 0.3 ± 0.25 – 0/+5 50 100
9 2 0.082 ± 0.3 ± 0.25 – 0/+5 50 100
15
13 1 0.052 ± 0.3 ± 0.20 – 0/+5 50 100
11 2 0.097 ± 0.3 ± 0.25 – 0/+5 50 100
10 2.5 0.117 ± 0.3 ± 0.30 – 0/+5 50 100
16 12 2 0.105 ± 0.3 ± 0.25 – 0/+5 50 100
20
18 1 0.071 ± 0.3 ± 0.20 – 0/+5 25 50
16 2 0.135 ± 0.3 ± 0.25 – 0/+5 25 50
14 3 0.191 ± 0.3 ± 0.30 – 0/+5 25 50
25
21 2 0.172 ± 0.3 ± 0.25 – 0/+5 25 50
19 3 0.247 ± 0.3 ± 0.30 – 0/+5 25 50
30
26 2 0.209 ± 0.5 ± 0.25 – 0/+5 10 40
24 3 0.303 ± 0.5 ± 0.30 – 0/+5 10 40
22 4 0.389 ± 0.5 ± 0.35 – 0/+5 10 40
20 5 0.467 ± 0.5 ± 0.40 – 0/+5 10 40
38 32 3 0.392 ± 0.5 ± 0.30 – 0/+5 10 40
transparent, both sides glossy, UV-transmitting
State October 2015 58
Tubes | extruded acrylic
5.1 PLEXIGLAS® XTClear
Continuation see next page
40 items with colored background are available from stock
30 Year Guarantee – PLEXIGLAS® no yellowing. Applies to all products listed above.
Tubes – Clear 0A070
Diameter in mm
Wallthicknessin mm
Weight at nom.dim.kg/m Tolerance in mm
Quantity delivered. units per small pack (lenght in mm)
Quantity delivered. units per large pack (lenght in mm)
outer inner Outer diameter Wall thickness Length 2000 2000
40
36 2 0.284 ± 0.5 ± 0.25 – 0/+5 10 40
34 3 0.415 ± 0.5 ± 0.30 – 0/+5 10 40
32 4 0.538 ± 0.5 ± 0.35 – 0/+5 10 40
30 5 0.654 ± 0.5 ± 0.40 – 0/+5 10 40
50
46 2 0.359 ± 0.5 ± 0.25 – 0/+5 8 30
44 3 0.527 ± 0.5 ± 0.30 – 0/+5 8 30
42 4 0.688 ± 0.5 ± 0.35 – 0/+5 8 30
40 5 0.841 ± 0.5 ± 0.40 – 0/+5 8 30
60
56 2 0.433 ± 0.6 ± 0.25 – 0/+5 8 30
54 3 0.639 ± 0.6 ± 0.35 – 0/+5 8 30
52 4 0.837 ± 0.6 ± 0.35 – 0/+5 8 30
50 5 1.028 ± 0.6 ± 0.40 – 0/+5 8 30
70
64 3 0.751 ± 0.7 ± 0.35 – 0/+5 8 30
62 4 0.986 ± 0.7 ± 0.40 – 0/+5 8 30
60 5 1.214 ± 0.7 ± 0.40 – 0/+5 8 30
80
74 3 0.863 ± 0.8 ± 0.35 – 0