5
DISTRIBUTION EQUIPMENT: ATEX/IECEx INCREASED SAFETY PANELBOARDS Visit our website at www.emerson.com or contact us at (800) 621-1506. © February 2020 416 PlexPower IEC Fiber Panelboard Factory Sealed. Panelboard with Fiber Patch Panel Applications The PlexPower™ IEC Fiber Panelboard provides indoor and outdoor protection and control of electrical circuits in hazardous environments such as: — Petroleum plants — Chemical plants — Refineries — Wastewater Treatment Plants — Paper and Pulp Industries — Other process facilities Ideal for placement in wet, corrosive environments or where flammable gases or vapors are likely to be present. Suitable for use on applications where both power and communication wiring is required. Features No external conduit or cable seals required thus making installations faster, easier, and less costly. The PlexPower Fiber Panelboard features a ground-breaking design that uses individual breaker housings to minimize the downtime and costs associated with servicing circuit breakers in hazardous locations. PlexPower breakers accommodate off-the-shelf Schneider breakers, making replacements readily available. The lighter weight panelboard enclosure can be quickly opened in the field for easier servicing. Standard models offer 8, 16 and 24 circuit panelboard configurations. • Supplied as standard: — Bottom entries with brass earth plate — Pre-drilled supplied with non Ex certified temporary plastic plugs — Standard hard wired, copper cables — Color coded wiring for phases; neutral (blue) and ground (yellow/green) — Internal actuators with waterproof windows — Internal wiring duct — Ground bars — External/internal ground lug — Phenolic nameplate (specify legend) Standard configuration includes internal actuators. Breaker modules supplied with captive steel bolts. Branch circuits available in single pole. — 1-pole: 120, 240 Volts, 20 Amps maximum. • Utilizes Belden MIPP TM Fiber Patch Panel. Panelboard designed for -40 °C to +50 °C (-40 °F to +122 °F) operation. Standard Materials Enclosure: fiberglass reinforced polyester (FRP) or stainless steel • Hardware: stainless steel Chassis: hot dip galvanized for wall mounting use Schneider is a registered trademark of Schneider Electric. Cutler-Hammer is a registered trademark of Eaton Corporation. Belden is a registered trademark Belden Inc. Fiber Panelboard Bus Bar Panel with Main Breaker Internal View ATEX/IECEx: Zone 1 and 2 - 21 and 22 II 2G/2D Ex db eb op pr IIB+H 2 or IIC T6 to T4 Gb Ex op pr tb IIIC Db IP66 Illustrated Features Weatherproof Window Fiber Patch Panel

PlexPower IEC Fiber Panelboard Factory Sealed. …...III EIPE EIECE x ICEE FE PEARDS iit or webite at or contact at 621-16. Febrary 418 PlexPower IEC Fiber Panelboard Factory Sealed

  • Upload
    others

  • View
    1

  • Download
    0

Embed Size (px)

Citation preview

Page 1: PlexPower IEC Fiber Panelboard Factory Sealed. …...III EIPE EIECE x ICEE FE PEARDS iit or webite at or contact at 621-16. Febrary 418 PlexPower IEC Fiber Panelboard Factory Sealed

DIST

RIBU

TION

EQUI

PMEN

T: AT

EX/I

ECEx

INCR

EASE

D SA

FETY

PAN

ELBO

ARDS

Visit our website at www.emerson.com or contact us at (800) 621-1506. © February 2020

416

PlexPower™ IEC Fiber PanelboardFactory Sealed. Panelboard with Fiber Patch Panel

Applications• The PlexPower™ IEC Fiber Panelboard provides indoor and

outdoor protection and control of electrical circuits in hazardous environments such as:

— Petroleum plants — Chemical plants —Refineries — Wastewater Treatment Plants — Paper and Pulp Industries — Other process facilities• Ideal for placement in wet, corrosive environments or where

flammablegasesorvaporsarelikelytobepresent.• Suitable for use on applications where both power and

communicationwiringisrequired.

Features• Noexternalconduitorcablesealsrequiredthusmaking

installationsfaster,easier,andlesscostly.• ThePlexPowerFiberPanelboardfeaturesaground-breaking

designthatusesindividualbreakerhousingstominimizethedowntimeandcostsassociatedwithservicingcircuitbreakersinhazardouslocations.

• PlexPowerbreakersaccommodateoff-the-shelfSchneider breakers,makingreplacementsreadilyavailable.

• Thelighterweightpanelboardenclosurecanbequicklyopenedinthefieldforeasierservicing.

• Standard models offer 8, 16 and 24 circuit panelboard configurations.

• Supplied as standard:— Bottom entries with brass earth plate—Pre-drilledsuppliedwithnonExcertifiedtemporaryplastic

plugs— Standard hard wired, copper cables—Colorcodedwiringforphases;neutral(blue)andground

(yellow/green)— Internal actuators with waterproof windows —Internalwiringduct— Ground bars—External/internalgroundlug—Phenolicnameplate(specifylegend)

• Standardconfigurationincludesinternalactuators.• Breakermodulessuppliedwithcaptivesteelbolts.• Branchcircuitsavailableinsinglepole.

—1-pole:120,240Volts,20Ampsmaximum.• Utilizes Belden MIPPTMFiberPatchPanel.• Panelboarddesignedfor-40°Cto+50°C(-40°Fto+122°F)

operation.

Standard Materials• Enclosure:fiberglassreinforcedpolyester(FRP)or

stainless steel• Hardware: stainless steel• Chassis:hotdipgalvanizedforwallmountinguse

Schneider is a registered trademark of Schneider Electric. ✢ Cutler-Hammer is a registered trademark of Eaton Corporation. Belden is a registered trademark Belden Inc.

Fiber Panelboard

Bus Bar Panel with Main BreakerInternal View

ATEX/IECEx: Zone 1 and 2 - 21 and 22

II 2G/2D Ex db eb op pr IIB+H2 or IIC T6 to T4 Gb Ex op pr tb IIIC Db IP66

Illustrated Features

Weatherproof Window Fiber Patch Panel

Page 2: PlexPower IEC Fiber Panelboard Factory Sealed. …...III EIPE EIECE x ICEE FE PEARDS iit or webite at or contact at 621-16. Febrary 418 PlexPower IEC Fiber Panelboard Factory Sealed

DISTRIBUTION EQUIPMENT: ATEX/IECEx INCREASED SAFETY PANELBOARDS

Visit our website at www.emerson.com or contact us at (800) 621-1506. © February 2020

417

ATEX/IECEx Certifications and Compliances• Type:PFPP

— Gas, Zones 1 and 2:–ConformingtoATEX2014/34/EU: II 2G–EquipmentProtectionLevel:EPLGb–TypeofProtection:ExdbebopprIIB+H2/IIC–TemperatureClass:T6toT4forTa=+50°C

— Dusts, Zones 21 and 22:–ConformingtoATEX: II 2D–EquipmentProtectionLevel:EPLDb–TypeofProtection:ExopprtbIIIC–SurfaceTemperature:+57°C to 62°CforTa=+50°C

—AmbientTemperatures:–Standardmodel:-25°Cto+50°C

• ATEXCertificate:EPS19ATEX1114• ECDeclarationofConformity:50304• IECExCertificate:IECExEPS19.0054X• IndexofProtectionaccordingEN/IEC60529:IP66• ImpactResistance:IK10

Related Products• RecommendedforusewiththeAppletonTCCableConnector.• AdditionalPlexPower™IECproducts: —PlexPower™FactorySealedIncreasedSafetyPanelboards

PlexPower™ IEC Fiber PanelboardFactory Sealed. Panelboard with Fiber Patch Panel

ATEX/IECEx: Zone 1 and 2 - 21 and 22

II 2G/2D Ex db eb op pr IIB+H2 or IIC T6 to T4 Gb Ex op pr tb IIIC Db IP66

Page 3: PlexPower IEC Fiber Panelboard Factory Sealed. …...III EIPE EIECE x ICEE FE PEARDS iit or webite at or contact at 621-16. Febrary 418 PlexPower IEC Fiber Panelboard Factory Sealed

DIST

RIBU

TION

EQUI

PMEN

T: AT

EX/I

ECEx

INCR

EASE

D SA

FETY

PAN

ELBO

ARDS

Visit our website at www.emerson.com or contact us at (800) 621-1506. © February 2020

418

PlexPower™ IEC Fiber PanelboardFactory Sealed. Panelboard with Fiber Patch Panel

ATEX/IECEx: Zone 1 and 2 - 21 and 22

II 2G/2D Ex db eb op pr IIB+H2 or IIC T6 to T4 Gb Ex op pr tb IIIC Db IP66

Catalog Numbering Guide

PF P B L 00 08 5 20 B BL ST

Step 1 Step 2Mains Selection

Step3Branches Selection

Step 4Fiber Definition

ATEX/IECExCertified

PF-PlexPower IEC Fiber Panel

MainType:L-Lug

Poles:5-1Pole+

neutral

Comm Manuf:BL-Belden

TG-Telegartner

Panel Material:P-FiberglassReinforced

Polyester(FRP)S-StainlessSteel

IncomingMainsAmpere:00-Lugs

AmpereRating:06-06AT10-10AT16-16AT20-20AT

Fiber Connect Type:

STSCLC

Number of Branches81624

BreakerType:B-TrippingCurveBC-TrippingCurveCD-TrippingCurveD

Panel Size : Select B, E, F enclosure based on number of circuits

B E F

Max.Circuits 8 16 24

Fiberglass Reinforced Polyester (FRP)

Abbreviated Standard Part Numbers Description

PFP08520CBLST Eight(8)(1P+N)20AbreakerswithBeldenpatchpanel

PFP16520CBLST Sixteen(16)(1P+N)20AbreakerswithBeldenpatchpanel

PFP24520CBLST Twenty-four(24)(1P+N)20AbreakerswithBeldenpatchpanel

Stainless Steel

Abbreviated Standard Part Numbers Description

PFS08520CBLST Eight(8)(1P+N)20AbreakerswithBeldenpatchpanel

PFS16520CBLST Sixteen(16)(1P+N)20AbreakerswithBeldenpatchpanel

PFS24520CBLST Twenty-four(24)(1P+N)20AbreakerswithBeldenpatchpanel

Page 4: PlexPower IEC Fiber Panelboard Factory Sealed. …...III EIPE EIECE x ICEE FE PEARDS iit or webite at or contact at 621-16. Febrary 418 PlexPower IEC Fiber Panelboard Factory Sealed

DISTRIBUTION EQUIPMENT: ATEX/IECEx INCREASED SAFETY PANELBOARDS

Visit our website at www.emerson.com or contact us at (800) 621-1506. © February 2020

419

PlexPower™ IEC Fiber PanelboardFactory Sealed. Panelboard with Fiber Patch Panel

ATEX/IECEx: Zone 1 and 2 - 21 and 22

II 2G/2D Ex db eb op pr IIB+H2 or IIC T6 to T4 Gb Ex op pr tb IIIC Db IP66

Dimensions in Millimeters (Inches)

8 Circuit

Front View Internal View Side View

151 (5.94)

202 (7.95)

237

(9.3

3)

186

(7.3

2)

1250

(49.

21)

339 (13.35)

298 (11.73)

1200

(47.

24)

98 (3.86)

93 (3

.66)

U

U

VV

YY

S

S

151 (5.94)

202 (7.95)

237

(9.3

3)

186

(7.3

2)

1250

(49.

21)

339 (13.35)

298 (11.73)

1200

(47.

24)

98 (3.86)

93 (3

.66)

U

U

VV

YY

S

S

151 (5.94)

202 (7.95)

237

(9.3

3)

186

(7.3

2)

1250

(49.

21)

339 (13.35)

298 (11.73)

1200

(47.

24)

98 (3.86)

93 (3

.66)

U

U

VV

YY

S

S

16 CircuitFront View Internal View Side View

(237)

(186)(2

66)

16 CKT PANEL POLYESTER

1250

(49.

21)

1200

(47.

24)

745 (29.33) 231 (9.09)

957 (37.68)

998 (39.29)

SS

UU

V

V

T

T

W W

(237)

(186)(2

66)

16 CKT PANEL POLYESTER

1250

(49.

21)

1200

(47.

24)

745 (29.33) 231 (9.09)

957 (37.68)

998 (39.29)

SS

UU

V

V

T

T

W W

(237)

(186)(2

66)

16 CKT PANEL POLYESTER

1250

(49.

21)

1200

(47.

24)

745 (29.33) 231 (9.09)

957 (37.68)

998 (39.29)

SS

UU

V

V

T

T

W W

Page 5: PlexPower IEC Fiber Panelboard Factory Sealed. …...III EIPE EIECE x ICEE FE PEARDS iit or webite at or contact at 621-16. Febrary 418 PlexPower IEC Fiber Panelboard Factory Sealed

DIST

RIBU

TION

EQUI

PMEN

T: AT

EX/I

ECEx

INCR

EASE

D SA

FETY

PAN

ELBO

ARDS

Visit our website at www.emerson.com or contact us at (800) 621-1506. © February 2020

420

PlexPower™ IEC Fiber PanelboardFactory Sealed. Panelboard with Fiber Patch Panel

ATEX/IECEx: Zone 1 and 2 - 21 and 22

II 2G/2D Ex db eb op pr IIB+H2 or IIC T6 to T4 Gb Ex op pr tb IIIC Db IP66

Dimensions in Millimeters (Inches)

24 CircuitFront View Internal View Side View

(186,3)

(237,2)

(266)

24 CKT PANEL POLYESTER

1250

(49.

21)

1200

(47.

24)

231 (9.09)

92 (3

.62)

S S

UU

V

V

T

T

WW

1329 (52.32)

1288 (50.71)

590 (23.23) 498 (19.61)

(186,3)

(237,2)

(266)

24 CKT PANEL POLYESTER

1250

(49.

21)

1200

(47.

24)

231 (9.09)

92 (3

.62)

S S

UU

V

V

T

T

WW

1329 (52.32)

1288 (50.71)

590 (23.23) 498 (19.61)

(186,3)

(237,2)

(266)

24 CKT PANEL POLYESTER

1250

(49.

21)

1200

(47.

24)

231 (9.09)

92 (3

.62)

S S

UU

V

V

T

T

WW

1329 (52.32)

1288 (50.71)

590 (23.23) 498 (19.61)

Panel Size Dimensions in Millimeters (Inches)

A4 Circuit

B8 Circuit

E16 Circuit

F24 Circuit

Polyester

Length 750(29.5) 1000(39.4) 1000(39.4) 1000(39.4)

Width 320(12.6) 320(12.6) 960(37.8) 1280(50.4)

Depth 150(5.9) 150(5.9) 230(9.1) 230(9.1)

Stainless Steel

Length 790(31.0) 1080(42.5) 1080(42.5) 1080(42.5)

Width 330(13.0) 330(13.0) 990(39.0) 1320(52.0)

Depth 150(5.9) 150(5.9) 230(9.1) 230(9.1)