PMP Course Book 51-2014

EGC COURSES

BOOK

INDEX

Civil engineering courses-1

1. Construction design 2. Advanced construction design 3. Shop drawings for Concrete buildings 4. Steel building design 5. ROAD DSEIGN by civil 3d 6. SEWAGE &WATER NETWORKS DESIGN 7. CIVIL3D 8. ROAD DSEIGN by LANDDESKTOP 9. TEKLA 10. REVIT structure 11. SITE WORKS FOR BUILNG CONSTRUCTION 12. Primavera 13. Technical office 14. ARC GIS

engineering coursesArchitecture -2

1. Architectural design course 2. Architecture program course package 3. REVIT architecture

3-Mechanical courses

1. HVAC DESIGN 2. FIRE FIGHTING 3. PLUMBING 4. REVIT MEP

4-Electric courses

1. ELECTRIC DESIGN

5-Communication courses

1. CCNA 1 2. CCNA 2

6-Management courses

1. PMP 2. BID & CONTRACT 3. CERTIFIED COST ENGINEER 4. Extension of Time Request (EOT) 5. Value engineering

7-conversation language courses

1. English conversation 2. French conversation 3. German conversation

ENGINEERING CIVIL SCOURSE

1- Construction Design course

Course brief

This course is a mix between the fundamental concrete design & the software program needed in the structural design

By this course you will be able to work as junior designer in any design office

This course is a practice for all design stages which is applied in any structural design office

All the design program and excel sheets will be available during the course

Course topics

Session 1

Concrete & Steel Reinforcement fundamentals.

Session 2

Design of Slabs (Solid Slab, hollow block Slab, Flat Slab, Paneled Beam)

Typical Structure Drawing of slabs

Egyptian code limits for Design & Detailing of Slabs.

Session 3

Design of beams

Design of short columns

Egyptian code limits for Design & Detailing of Beams & Columns

Session 4

Design of long columns

Session5

Design of Stairs.

Design of retaining walls.

Session 6

Design of Foundations.

Session 7

Modeling & Design of slabs and Beams on safe program.

Session 8

Completion of Modeling & Design of slabs and Beams on safe program.

Session 9

Wind Loads & Seismic Loads on Etab Program.

Session 10

Design of Vertical elements (Columns and Shear walls) on Etab Program.

Convert the reactions form Etabs model to safe program for design of raft foundation.

No of Audience UP TO 5 Persons

Course duration 30 hours

Instructor prequalification Course instructors are senior design engineers who have professional experience

in the design of various projects

2-Advanced Construction Design course

Course brief

This course is a mix between the fundamental concrete design & the software program needed in the structural design


This course is a practice for all design stages which is applied in any structural design office


Course topics

Session 1

Design of water tanks.

Session 2

Design of Retaining walls.

Session 3

Design of precast Buildings.

Session 4

Completion Design of precast Buildings

Session 5

Introduction for design of bridges.

Session 6

Completion of design of bridges.

Session 7

Design of post tensions slabs

Session 8

Completion of design of post tension slabs

Session 9

design of post high rise buildings

Session 10

Completion of design of high rise buildings





drawings for Concrete buildings Shop -3

Course brief

By this course you will able to achieve any concrete shop drawings with bar bending schedule

Course topics

Session 1

Introductions

Session 2

Shop drawings of slabs (plans & sections).

Session 3

Design of precast Buildings.

Session 4

Shop drawings of beams and columns (Elevations & sections).

Session 5

Shop drawings of foundations (Plans & sections).

Session 6

Types of codes for presentation of shop drawings (BS & Egyptian Codes).

Session 7

Bar Bending schedule.

Session 8

Completion of Bar Bending schedule




in the design of various project

design buildingSteel -4

Course brief

By this course you will able to work as junior steel designer in any design office

Course topics

Session 1

STATICAL SYSTEMS

Session 2

LOADING

Session 3:

DESIGN OF FRAME

Session 4

DESIGN OF TRUSS

Session 5

DESIGN OF END WALL FRAMING

Session 6

DESIGN OF BRACING

Session 7

DESIGN OF JACK SYSTEMS

Session 8

DESIGN OF MEZZANINE





by civil 3design course DRoads -5

Course brief

This course is a mix between the fundamental road design & the software program needed in the roads design


This course is a practice for all design stages which is applied in any road design office


Course topics

Session 1 &2

HORIZONTAL ALIGMNET

Session 3 &4

VERTICAL ALIGNMENT

Session 5 &6

CROSS SECTIONS

INTERSECTIONS

Session 7 &8

ROUNDABOUTS





by land desktopRoads design course -6

Course brief

This course is a mix between the fundamental road design & the software program needed in the roads design


This course is a practice for all design stages which is applied in any road design office


Course topics

Session 1 &2

HORIZONTAL ALIGMNET

Session 3 &4

VERTICAL ALIGNMENT

Session 5 &6

CROSS SECTIONS

INTERSECTIONS

Session 7 &8

ROUNDABOUTS





7-Sewage & Water networks Design course using water & sewer cad program

Course brief


This course is a practice for all design stages which is applied in any utilities design office

All the design program like water & sewer cade and excel sheets will be available during the course

Course topics

Session 1 &2&3

SEWAGE PIPE LINE DESIGN

Session 4 &5&6

WATER PIPE LINE DESIGN

Session 7

SEWER CAD APPLICATION ON SEWAGE PIPE LINES

Session 8

WATER CAD APPLICATION ON SEWAGE PIPE LINES





8-CIVIL 3D Program OUTLINES

Course brief

By this course you will be able to create any quantity surveying or shop drawing related to road works by using CIVIL3D program

Course topics

Session 1

CIVIL3D PREFACE

Session 2

POINTS MENU

Session 3

ALIGMNET MENUE

Session 4

PROFILE MENUE

Session 5

ASSEMBLE & SUBASSEMBL

Session 6&7

CREATE COORRIDOR

Session 8

QUANTITY SURVYING





10-TEKLA Program OUTLINES

Course brief

By this course you will be able to make all shop dawning's related to concrete and steel works

Course topics Session 1

Introduction:

Session 2

Member commands

Session 3

Completion of member commands

Session 4

Connections:

Session 5

Completion of Connections:

Session 6

Catalog:

Session 7

Completion of Catalog:

Session 8

Project sample.





11-REVIT structure program OUTLINE

Course brief

By this course you will be able to make all shop dawning's related to concrete and steel works

Session 1

Introduction, user interface, Levels lines& foundation elements

Session 2

Superstructure modeling, structural columns

Session 3

Structural beams, framing element, on grid elements

Session 4

Beams system, floors

Session 5

Beam copying tools-copy paste-sloped framing.

Session 6

Shaft openings, framing elevation

Session 7

Dimension tools, tags and tag all method, beam annotation , symbols

Session 8

Project sample.





12-SITE WORKS FOR BUILDING CONSTRUCTION

Course brief

By This course you will be aware with all the method statement for the construction & finishing stages

During the course , you will study a housing project from the excavation stage till the turn key stage

Course topics

Session 1

INTRODUCTION , BUILDING EXCVATION& SITE PREPRATION

Session 2

FOOTING CONSTRUCTION

Session 3

COLUMNS , SHEAR WALL CONSTRUCTION

Session 4

SLABS CONSTRUCTION , PROOFING , CURING

Session 5

BRIK WORKS, REINFORCMENT & CONCRETE QUANTITY SURVYING

Session 6

Electric , plaster & Gibson works

Session 7

Carpentering & aluminum works

Session 8

Flooring works

Session 9

Plumping works

Session 10

Painting works



Instructor prequalification Course instructors are senior site engineers who have professional experience in

the construction of various projects

13-Primavera (p6)

Course brief

By This course you will be aware all the planning methodology and you can change your career to junior planner

Course topics

Session 1

Introduction

Concepts of Project Management

Objectives of Project Managing

Creating EPS and OBS hierarchy

What Is Project Methodology and Project Management

Session 2

Understanding WBS

Relationships between Activities

Defining The Critical Path of the project

Session 3

Interface

Navigating The Main Screen

Menus and Tool Bars

Activity Table and Gantt Chart

Customizing The Layout

Adding New Project

Session 4

Defining currency and units

Creating WBS

Defining Calendars

Creating Activities ID and Codes

Inserting Activities

Session 5

Working in Project

Inserting Relationships

Scheduling The Project

Adding Constraints, suspended and resuming dates

Customizing activity Table

User- defined fields

Session 6

Customizing the Gantt Chart

Customizing Time Scale

Filtering, Sorting and Grouping Activities

Using Global Change

Session 7

Working in Network Logic

Tracking the Project schedule

Creating Project Baseline(s)

Updating The Project with actual dates and percentage of work

Session 8

Comparing Baseline schedule to the current one

Analyzing the comparing results

Getting Reports

Tabular Reports

layouts Reports

Session 9

Resources

The Meaning of resources

Understanding driving recourses and how they affect the project

Resources and calendars

Creating resources and roles database

Cost Accounts

Assignment

Assigning resources to activities

Session 10

Using resource, cost and budget layouts

Working with resources

Cost account

Sorting, grouping and filtering resources

Using resource profile and resource table

Session 11

Leveling resources

Tracking the project resources

Updating Baseline(s)

Updating the project with actual resources

Comparing baseline cost to the current

Performance Control

Planned cost

Earned cost

Session 12

Actual cost

Cost and schedule variance

Project Issues and thresholds ADDING Issues Assign tracking layouts to issues Using issue navigator Thresholds Monitoring thresholds

Session 13

Risk Managing Adding Risks Calculating exposure value Calculating Risk impact Getting Reports Resources reports Cost reports Budget reports Custom reports Some Advanced Features



Instructor prequalification Course instructors are senior planner engineers who have professional

experience in the planning of various projects

OfficeTechnical -14

Course brief

By this course you will able to work as junior Technical Office in any design office

Course topics

Session 1

Introduction to the functions of the Technical Office.

Session 2

AutoCAD.

Session 3

Excel.

Session 4

.Reading Engineering Drawings and reviewing it..

Session 5

Assay and characterization of items (with Pictures).

Session 6

Work Shop Drawings

Session 7&8&9

Quantities surveying.

Session 10

Steel quantities surveying.

Session 11

Certificate of Payment & Assisting Excel sheets

No of Audience

UP TO 5 Persons


ARC GIS -15

Course brief

By this course you will able to join all the geographical date to any software program

Course topics

Session 1

Introduction.& Exploring GIS concepts.

Session 2

ESRI & GIS software.

Session 3

Spatial reference & Geo-Reference .

Session 4

Map correction.& Building Geo_ Database.

Session 5

Digitizing (Convert image to digital map) .

Session 6

Displaying data.& Querying your data.

Session 7

Working with spatial data.& Working with tables.

Session 8

Editing data .& Working with georeferenced data .& Presenting data.

Session 9

Working with layers & maps .& Labels & Annotation .

Session 10

Customize the ArcGIS interface .& Designing a GIS database .

Session 11

Populating the geodatabase .& Editing spatial & attribute data .

Session12

spatial analysis functions & geoprocessing.



Architecture engineering courses

1. Architectural design course

Course brife:-

By this course you will be able to work as junior designer in any design office.

This course is a practice for all design stages which is applied in any architecture design office.

All the design program and excel sheets will be available during the course.

Course topics:-

Session 1:-

Program

Session 2:-

Brain storm

.Session 3:-

Concept

Session 4:-

Schematic design

.Session 5:-

Presentation

Session 6:-

Design development

.Session 7:-

Working drawings +BOQ

No of Audience:-

UP TO 5 Persons Course duration:-

30 hours Instructor prequalification:-

Course instructors are senior design engineers who have professional experience in the design of various projects

2 - Architecture program course package Course brief:-

By this course you will be able to work as junior designer in any design office.

This course is a practice for all design stages which is applied in any architecture design office.

All the design program and excel sheets will be available during the course.

Course topics:-

This course will be implemented on 14 lectures

The course will include the study of the following program

Autocad

Photoshop

3d max

3-REVIT architecture Program OUTLINE

Course brief

By this course you will be able to make all the design & shop dawning's related to architecture drawings

Session 1 :

• BIM concept • Revit overview • Revit Architecture Basics • Starting a Design

Session 2:

• Working with Walls

• Adding and modifying Doors

• Adding and modifying window

• Building components

• Thin line

• Visibility / Graphics

Session 3:

Curtain walls

Dimensions

Floors

Selection filter

Join-Attach

Ceilings

Roof (foot print – roof by extrusion)

Opening by face – vertical opening – Dormer opening

Split face – paint

Plan region

View range

Object style

Project parameters ( firefighting example)

Visibility & graphics filter

View templates

Session 4:

stairs Array (kinear – polar – grouping) Ramps Shafts Railings Model in place

Session 5:

Masses Import and export Schedules – Material takeoff Project parameters ( cost example ) Interference check Select by ID - ID of selection Rooms and Areas ( room legend ) Purge unused

Session 6:

Callouts Model in text Tags Revision clouds

Drafting views Legends Sheets ( Adding sheets – Adding views to sheet – sheet

properties Title blocks ( modifying title blocks – placing title block in sheets

) Materials Rendering ( creat camera – render properties – creat

walkthrough) Project sample.





MECHNICAL ENGINEERINGSCOURSE

1-HVAC Design course outline

Course brief


All the design program and excel sheets will be available during the course Course topics

Session 1

Introduction to HVAC fundamentals.

Session 2

Types of HVAC systems

Session 3

Air Duct design.

Session 4

Air outlets types and selection

Session 5

Balancing of air side systems

Session 6

Static pressure calculation

Session 7

Equipment’s selection

Session 8

Chilled water pipes sizing

Session 9

Pump head calculations & water side balancing.

Session 10

QUANTITY SURVYING


No of Audience

UP TO 5 Persons



2-Plumbing Design outline course

Course brief



Course topics

Session 1

Introduction to plumbing systems.

Session 2

Drainage & vent system description

Session 3

Drainage Pipes sizing

Session 4

Water supply systems description

Session 5

Water pipe sizing and pressure analysis

Session 6

Water Pump head calculations & QUANTITY SURVYING





3-Firefighting design outline course

Course brief


All the design program and excel sheets will be available during the course Course topics

Session 1

Introduction to firefighting systems & NFPA.

Session 2

Hazards classification & types of systems

Session 3

Sprinklers system design

Session 4&5

Hydraulic calculations

Session 6

Standpipes system

Session 7

Pressure analysis & Firefighting Water Pump calculations

Session 8

Clean agent systems & Quantity surveying




in the design of various project

REVIT MEP Program OUTLINE

Course brief


All the design program and excel sheets will be available during the course Course topics Session 1

Building information modeling definition comparison between cad system and revit system comparison between revit 2012 & revit 2013( COMBO) Revit &family & template extensions Template definition loading template from c to revit( file location) open project with mechanical and electrical template and show difference

between them through ( views-vv-loading families)

Define families loading families from c to revit ( file location) open project with system default template Insert tab Difference between (link cad & import cad) collaborate tab ( copy & monitor) Manage links explaining project browser creating new views with new sub discipline Modify tab

Session 2

analyze tab placing spaces on a single level placing spaces in an open area and controlling for separation for that space placing spaces automatically placing a multi - level space creating a zone on a single level creating a zone on a multiple levels project information analyzing heating and cooling loads creating space and zone legend on ( plan - sections)

3

Session 3

Project unit Snaps setting Short cuts and creation for new short cut Explaining object style visibility and graphics Types of families ( system& loaded) Types of loaded families ( hosted & non hosted) and explaining difference

between them Placing hosted & non hosted families Classification of families ( category - family - type) instance and type parameters Modify instance and type parameters for a family ( ex: air terminal) Creating new duct type with editing for routing Creating new duct system Mechanical setting Adding mechanical equipments creating ductwork system for air system creating auto layout Placing fitting & accessories Creating manual duct work placing risers system inspector Duct sizing Duct pressure loss report Duct legend

session :4

1-Design of plumbing system

adding sanitary plumbing fixture creating new pipe type with editing for routing creating sanitary system creating auto layout creating manual sanitary system adding accessories & fittings creating automatic layout cold water system creating manual cold water system creating automatic layout hot water system creating manual hot water system pipe sizing

system inspector View range filters

2- Design of fire fighting system

creating new pipe type Adding sprinklers Creating automatic fire fighting layout system Complete manual fire fighting layout system Adding mechanical equipments Adding vertical piping Adding accessories

session :5

Electrical setting

Adding lighting fixtures

Modify lighting fixtures

Adding electrical equipments( panel)

Modify panel voltage

Voltage definition

Distribution system

Define new wire type

Creating automatic power circuit

Modify circuit naming

Panel schedule ( rebalance load & assign spare)

Placing switches & junction box & receptacles

Creating manual power circuit

Load calculation

Creating switch system

Light current system

Panel schedule for light current system

Modeling of cable trays and conduit

session :6

Clash detection & check interference

Check by id

Annotate tab

Creating annotations & dimensions

constraining ( lock- pin - equal)

41 | P a g e EGC ( NEW CAIRO – THIRD DISTRICT – 01000957525-01000957527)

Tag element & Tag all for single element

Modify tag and editing labels & prefix & suffix

Creating section 2d & 3d

View control bar ( isolate & hide )

Thin line

View template

Copy clipboard & paste for view

Duplicate ( duplicate - duplicate with detailing- duplicate as dependent)

Match line & view reference

Crop view & annotation crop

Difference between cloud & callout

groups & non group

Creating schedules & modify for it

Creating sheets

Modify sheet

Activation & deactivation of view

Exporting

Printing


oursesC Design ELECTRIC


1-ELECTRIC design outline course

(Power system distribution)

Outdoor & indoor

Course brief By this course you will be able to work as junior designer in any design office

All the design program will be available during the course Course topics

Session 1:

1. over view about power system

Session 2:

1. medium voltage net work

Session 3: 1. low voltage net work

Session 4: 1. strait and landscape lighting

Session 5: 1. light current net work

Session 6:

Lighting

Session 7:

Power

Session 8: Data and telephone (design and shop drawing worked at administration building madinaty project b6)

Session 9:

CCTV (closed circuit television system) (video surveillance)

Session 10: MATV (master antenna television)

Session 11: FIRE ALARM

Session 12:


Fountain (under water lighting)

Session 13: Ear thing

cable test luminaries test lux test in site



Instructor prequalification Course instructors are senior design engineers who have professional experience in the

design of various projects


Communication courses


1-CCNA 1

Course brief

CERTIFIED NETORK ASSOCIATE ( CISCO CCNA) CERTIFICATION DEMONSTRATES YOUR KNOWLEDGE TO DEPLOY, MAINTAIN, SECURE AND OPERATE A MEDIUM-SIZED NETWORK USING CISCO TECHNOLO-GIES. CISCO CCNA CERTIFIED PROFESSIONALS CAN INSTAAL, CONFIGURE, AND OPERATE LAN, WAN, AND DIAL ACCESS SERVICES FOR SMALL NETWORKS (100 NODES OR FEWER), INCLUDING BUT NOT LIM-ITED TO USE OF THESE PROTOCOLS: IP, IGRP,SERIAL,FRAME RELAY,IP RIP,VLANS,RIP,ETHERNET,ACCESS LISTS.

Course topics

Session 1

Building a Simple Network

Session 2

Ethernet Local Area Networks

Session 3

Wireless Local Area Networks

Session 4

Local Area Network Connections

Session 5

Wide Area Networks Connections

Session 6

Network Environment Management




Instructor prequalification Course instructors are senior engineers who have professional experience in the

COMMUNICATION department in various projects


1-CCNA 2

Course brief

CERTIFIED NETORK ASSOCIATE ( CISCO CCNA) CERTIFICATION DEMONSTRATES YOUR KNOWLEDGE TO DEPLOY, MAINTAIN, SECURE AND OPERATE A MEDIUM-SIZED NETWORK USING CISCO TECHNOLO-GIES. CISCO CCNA CERTIFIED PROFESSIONALS CAN INSTAAL, CONFIGURE, AND OPERATE LAN, WAN, AND DIAL ACCESS SERVICES FOR SMALL NETWORKS (100 NODES OR FEWER), INCLUDING BUT NOT LIM-ITED TO USE OF THESE PROTOCOLS: IP,IGRP,SERIAL,FRAME RELAY,IP RIP,VLANS,RIP,ETHERNET,ACCESS LISTS.

Course topics

Session 1

Small Network Implementation

Session 2

Medium-Sized Switched Network Construction

Session 3

Medium-Sized Routed Network Construction

Session 4

Single Area OSPF Implementation

Session 5

EIGRP Implementation

Session 6

Access Control Lists


Session 7

Address Space Management

Session 8

LAN Extensionin to a WAN



Instructor prequalification Course instructors are senior engineers who have professional experience in the

COMMUNICATION department in various projects


GMENT COURSESAMAN

1-PMP COURSE

Project Management, PMP

Certification

Program IMPLEMENTATION

WORKSHOPS + EXAM PREPRATION &

ASSESSMENT


Course brief

By this course you will be gain the capabilities of the professional project manger

You will ready to join the exam which set by PMI

By this course you can join easily with any multinational company

- Course topics

Session 1 :

Introduction

Project Lifecycle and Organization

Session 2 Project Scope Management

Session 3 Project time Management

Session 4 :

Project Cost Management

Session 5 : Project Quality Management

Session 6 : Project Risk Management

Session 7 : Project Communications Management

Project Human Resource Management

Session 8 : Project Procurement Management

Project Integration Management



Instructor prequalification Course instructors are senior design engineers who have professional experience in

the project management field


.

2- BID & CONTRACT COURSE

Bid & Contract Program

For Engineering Projects


Course brief By this course you will be able to evaluate the type of contracts

By this course you can join easily with any multinational company to wrk in the career of contracts which became urgently required

Course topics

PROGRAM OUTLINES Session 1

Engineering project life cycle Pre-qualification and tendering procedures

Session 2 Types of contracts Tendering evaluation and awarding the contract Important contract terms and clauses

Session 3 Commencement and completion adverse physical conditions and artificial obstructions

Delays and extension of deadline, variations and valuation

Session 4

Liquidated damages and penalty clauses, disputes and claims

Settlement of disputes Case studies

Course duration 40hours


Instructor prequalification Course instructors are have professional experience in the contract administration in

multinational companies

54 | PAGE EGC ( NEW CAIRO – THIRD DISTRICT – 01000957525-01000957527)

3-Certified Cost Engineer Consultant

Certification Program IMPLEMENTATION WORKSHOPS + EXAM PREPRATION & ASSESSMENT

Accredited by Association for the Advancement of Cost

Engineering International (AACEI) - USA


Course brief By this course you will be able to work in the field of cost administration in the any



• Cost Basics • Cost Estimating • Productivity Analysis • Engineering Economics

Session 1

• Break Even Analysis • Planning & Scheduling • Progress & Cost Control • Contract Management

Session 3

• Project Management • Total Quality Management • Value Engineering • Management & Behavioral Sciences

Session 4

• Probability & Statistics

• Technical Paper Writing




Instructor prequalification Course instructors are have professional experience in the cost administration in



4- Extension of Time


Course brief

Any Time Extension Request must be entirely on its own merit, well analyzed and emphasized, properly documented, fully substantiated that there is no question of the validity of the request. This 3-day course will provide in-depth understanding of the concepts and art of preparing and defending Time Extension Requests.

Topics will cover the basic concepts of delays, tracking delays, mitigating delays, baseline schedule as well as analyzing the effect of delay(s) on the baseline schedule. In addition, it is extended to give a detailed guide about preparing a comprehensive Extension of Time Request including the prolongation and disruption costs


Causes of Delays

Session 2

Project Baseline Schedule

Session 3

Tracking Delays

Related Contractual Issues

Session 4

Calculating Delays Effect/Impact on Schedule

Session 5

Delay Mitigation

Session 6

Acceleration Plan

Session 7

Prolongation Cost


Session 8

Disruption Session 9

Verification of Documents (Documentation)

Session 10

Defending an Extension of Time



Instructor prequalification Course instructors are have professional experience in the cost administration in



Value engineering

Course brief

By This course you will be aware with the principle of the value engineering in any projects

This course became highly required in the multinational firms

Course topics

Session 1 The basic principles and organization

Pre study Stage + information Phase.

Definitions, objectives and targets of value engineering

Principles of Value Engineering

Organization and planning of Value engineering

Stages of Value Engineering

Value Engineering Phases (information & data collection - Function Analysis- Creativity Phase- Evaluation-Development-Presentation)

Formation of a working group on value engineering

1.. Analysis of the initial requirements and specifications

benchmarking and gathering information about available solutions

V E workshop using pre-study & information phase tools and techniques.

Session 2 Function Analysis Phase + FAST Diagram

Function Identification

.Function Classification.

Levels of Abstractions.

Function Analysis system Techniques

V E workshop to learn how to use the function analysis tools and techniques .

Drawing the FAST Diagram of the case study .

Session 3


Creativity ,evaluation and Development phases

1.1 . Functional-cost analysis ( Function Analysis.)

1.3 . Techniques of group discussion and idea generation

1.1 . Development of performance indicators (financial and non-financial)

1.3 . Quality Base Selection.

V E workshop to learn how to apply the creativity, evaluation &development tools and techniques

.Session 4

. Implementation of the results of value engineering

3.1 . Simulation of life cycle costs

3.3 . Evaluation of options and proposals on the basis of the value engineering

3.. . Reporting format in value engineering

3.3 . Using the results of value engineering in projects of capital construction.

V E workshop to learn how to analyze different projects using the life cycle costing and to prepare VEP

+revision using the mind maps to be ready for the AVS exam . .Session 5 AVS exam



Instructor prequalification Course instructors are senior site engineers who have professional experience in the

construction of various projects


Conversation language COURSES


1. ENGLISH language conversation

Course Summary:

( Level I ) Intensive conversation course at the Elementary stage.

Duration (24Hours/ 8 Sessions)

( Level II ) Intensive conversation practice and discussion course intermediate stage. Duration ( 24 Hour/ 8 Sessions )

( Level III ) Intensive conversation course at the advanced stage.

Duration ( 24 Hour/ 8 Sessions)

. Course duration (Per Level )

One Day a week ( 6 Weeks )

Two Day a week ( 4 Weeks )

Condensed ( 2 Weeks )


Instructor prequalification Course instructors are have professional experience in learning English language


2. FRENCH language conversation

Course Summary:











Instructor prequalification Course instructors are have professional experience in learning French language


3. GERMAN language conversation

Course Summary:











Instructor prequalification Course instructors are have professional experience in learning GERMAN language


THANK YOU

EGC (BUSINEES DEVLOPMENT TEAM)

NEW CAIRO – THIRD DISTRICT EMAIL: [email protected] TEL: 0226182108- 01000957525-01129768957