Click here to load reader
Upload
ermusat
View
8
Download
4
Embed Size (px)
Citation preview
March 2013
Process Industry Practices Piping
PIP PNDMV003 Gate Valve Data Sheet and Standard Terms
PURPOSE AND USE OF PROCESS INDUSTRY PRACTICES In an effort to minimize the cost of process industry facilities, this Practice has been prepared from the technical requirements in the existing standards of major industrial users, contractors, or standards organizations. By harmonizing these technical requirements into a single set of Practices, administrative, application, and engineering costs to both the purchaser and the manufacturer should be reduced. While this Practice is expected to incorporate the majority of requirements of most users, individual applications may involve requirements that will be appended to and take precedence over this Practice. Determinations concerning fitness for purpose and particular matters or application of the Practice to particular project or engineering situations should not be made solely on information contained in these materials. The use of trade names from time to time should not be viewed as an expression of preference but rather recognized as normal usage in the trade. Other brands having the same specifications are equally correct and may be substituted for those named. All Practices or guidelines are intended to be consistent with applicable laws and regulations including OSHA requirements. To the extent these Practices or guidelines should conflict with OSHA or other applicable laws or regulations, such laws or regulations must be followed. Consult an appropriate professional before applying or acting on any material contained in or suggested by the Practice.
This Practice is subject to revision at any time.
© Process Industry Practices (PIP), Construction Industry Institute, The University of Texas at Austin, 3925 West Braker Lane (R4500), Austin, Texas 78759. PIP Member Companies and Subscribers may copy this Practice for their internal use. Changes or modifications of any kind are not permitted within any PIP Practice without the express written authorization of PIP. Authorized Users may attach addenda or overlays to clearly indicate modifications or exceptions to specific sections of PIP Practices. Authorized Users may provide their clients, suppliers and contractors with copies of the Practice solely for Authorized Users’ purposes. These purposes include but are not limited to the procurement process (e.g., as attachments to requests for quotation/ purchase orders or requests for proposals/contracts) and preparation and issue of design engineering deliverables for use on a specific project by Authorized User’s client. PIP’s copyright notices must be clearly indicated and unequivocally incorporated in documents where an Authorized User desires to provide any third party with copies of the Practice.
PRINTING HISTORY March 2013 Issued
Not printed with State funds
March 2013
Process Industry Practices Page 1 of 7
Process Industry Practices Piping
PIP PNDMV003 Gate Valve Data Sheet and Standard Terms
Table of Contents
1. Introduction .................................. 2 1.1 Purpose ............................................. 2 1.2 Scope ................................................. 2
2. Requirements ............................... 2
Data Form PNDMV003-D Gate Valve Data Sheet
PIP PNDMV003 Gate Valve Data Sheet and Standard Terms March 2013
Process Industry Practices Page 2 of 7
1. Introduction
1.1 Purpose This Practice provides a data sheet and standard terms used for specifying gate valves.
1.2 Scope This Practice describes, in table format, the standard terms used in the drop down menus of the PIP gate valve data sheet appended to this Practice.
1.3 Additional New Standard Terms This first issue of this Practice contains only those standard terms used in PIP Valve Description Practices. In addition to new standard terms added by PIP as required to support new valve descriptions, future publications of this Practice may also contain additional valve description terms that are in general valve industry usage but not in the PIP Valve Descriptions Practices. Additional standard terms associated with non-PIP valve descriptions may be submitted to the PIP office at [email protected] for consideration for adoption into this Practice.
2. Requirements
Table 1 provides standard terms for specifying the characteristics of a gate valve using the PIP PNDMV003-D Data Sheet. The terms are included in drop down menus for each cell in the data sheet.
Table 1 – Gate Valve Characteristics Standard Terms
Characteristic Standard Terms Valve Size Range (Min.) NPS 1/8
NPS 1/4 NPS 3/8 NPS 1/2 NPS 3/4 NPS 1 NPS 1-1/4 NPS 1-1/2 NPS 2 NPS 2-1/2 NPS 3
NPS 3-1/2 NPS 4 NPS 5 NPS 6 NPS 8 NPS 10 NPS 12 NPS 14 NPS 16 NPS 18 NPS 20
NPS 22 NPS 24 NPS 26 NPS 28 NPS 30 NPS 32 NPS 34 NPS 36 NPS 38 NPS 40
NPS 42 NPS 44 NPS 46 NPS 48 NPS 50 NPS 52 NPS 54 NPS 56 NPS 58 NPS 60
NPS 66 NPS 72 NPS 78 NPS 84 NPS 90 NPS 96 NPS 102 NPS 108 NPS 120 NPS 144
Valve Size Range (Max.) NPS 1/8 NPS 1/4 NPS 3/8 NPS 1/2 NPS 3/4 NPS 1 NPS 1-1/4 NPS 1-1/2 NPS 2 NPS 2-1/2 NPS 3
NPS 3-1/2 NPS 4 NPS 5 NPS 6 NPS 8 NPS 10 NPS 12 NPS 14 NPS 16 NPS 18 NPS 20
NPS 22 NPS 24 NPS 26 NPS 28 NPS 30 NPS 32 NPS 34 NPS 36 NPS 38 NPS 40
NPS 42 NPS 44 NPS 46 NPS 48 NPS 50 NPS 52 NPS 54 NPS 56 NPS 58 NPS 60
NPS 66 NPS 72 NPS 78 NPS 84 NPS 90 NPS 96 NPS 102 NPS 108 NPS 120 NPS 144
PIP PNDMV003 Gate Valve Data Sheet and Standard Terms March 2013
Process Industry Practices Page 3 of 7
Table 1 – Gate Valve Characteristics Standard Terms (continued) Valve Size NPS 1/8
NPS 1/4 NPS 3/8 NPS 1/2 NPS 3/4 NPS 1 NPS 1-1/4 NPS 1-1/2 NPS 2 NPS 2-1/2 NPS 3
NPS 3-1/2 NPS 4 NPS 5 NPS 6 NPS 8 NPS 10 NPS 12 NPS 14 NPS 16 NPS 18 NPS 20
NPS 22 NPS 24 NPS 26 NPS 28 NPS 30 NPS 32 NPS 34 NPS 36 NPS 38 NPS 40
NPS 42 NPS 44 NPS 46 NPS 48 NPS 50 NPS 52 NPS 54 NPS 56 NPS 58 NPS 60
NPS 66 NPS 72 NPS 78 NPS 84 NPS 90 NPS 96 NPS 102 NPS 108 NPS 120 NPS 144
Service - Class Cryogenic Flammable General or utility
High pressure High temperature Lethal
Low temperature Toxic
Service - Fluid Type Air - instrument Air - plant Ammonia - anhydrous liquid Butane - liquid Carbon Dioxide - dry Carbon Dioxide - wet Crude oil - sour Crude oil - sweet Fuel gas Fuel oil Glycol Hydrochloric acid Lube oil Nitrogen
Nitric acid LNG Oxygen Propane Sewer sanitary -
forced/gravity Steam, condensate Sulphur - liquid Water - boiler feed Water - fresh, cooling tower; Water - demineralized Water - fire - AG Water - fire - BG Water - potable Water - sea
End Connection - Type Compression Flanged
Lugged Threaded
Wafer Welded
End Connection - Style Bolt holes tapped Bolt holes untapped BW Ferrule tube FF
MJ Oversized
reducing flange Push On RF
RF, Molded Roll Grooved SW Tubing SW X THD THD
End Connection - Ends Standard
ANSI/AWWA C110/A21.10 ANSI/AWWA C111/A21.11 API 602 API 609 ASME B1.20.1 ASME B16.1 ASME B16.1 Class 125 ASME B16.11
ASME B16.25 ASME B16.47 Series A ASME B16.47 Series B ASME B16.5 ASME B16.5 Class 125 ASME B16.5 Class 150 Mfg std
Flange Face Finish Std ASME B16.5 Mfg std Other
PIP PNDMV003 Gate Valve Data Sheet and Standard Terms March 2013
Process Industry Practices Page 4 of 7
Table 1 – Gate Valve Characteristics Standard Terms (continued)
Pressure Rating - Class ASME 75 ASME 125 ASME 150 ASME 200
ASME 250 ASME 300 ASME 400 ASME 600
ASME 800 ASME 900 ASME 1500 ASME 2000
ASME 2500 ASME 4500 ASME 6000 Mfg std
Body/Bonnet Material - Body - Material
Alloy 20 Bronze Alloy B2 Alloy C CI DI
Alloy 400 CS ITCS SS 2205 Duplex SS CD4MCuN
CK3MCuN 1.1/4 Cr 1/2 Mo 2.1/4 Cr 1 Mo 5 Cr 1/2 Mo 9 Cr 1 Mo
Body/Bonnet Material - Body - ASTM Number
A105 A126-B A182-F11-CL-2 A182-F22-CL-3 A182-F304H A182-F316/316L A182-F316 A182-F316L A182-F321 A182-F321H A182-F347 A182-F347H
A182-F5 A182-F51 A182-F9 A216-WCB A217-C12 A217-C5 A217-C9 A217-WC6 A217-WC9 A350-LF2-CL-1 A351-CF3M A351-CF8C
A351-CF8M A351-CK3MCuN A351-CN7M A352-LCB A352-LCC A494-CW-12MW A494-M-35-1 A494-N-12MV A536-65-45-12 A995-1B B564-UNS-N04400 B61
Body/Bonnet Material - Body - Manufacturing Process
Annealed Cast Die formed
Forged Heat treated
Precipitation hardened
Other
Body/Bonnet Material - Bonnet - Material
Alloy 20 Bronze Alloy B2 Alloy C CI DI
Alloy 400 CS ITCS SS 2205 Duplex SS CD4MCuN
CK3MCuN 1.1/4 Cr 1/2 Mo 2.1/4 Cr 1 Mo 5 Cr 1/2 Mo 9 Cr 1 Mo
Body/Bonnet Material - Bonnet - ASTM Number
A105 A126-B A182-F11-CL-2 A182-F22-CL-3 A182-F304H A182-F316/316L A182-F316 A182-F316L A182-F321 A182-F321H A182-F347 A182-F347H
A182-F5 A182-F51 A182-F9 A216-WCB A217-C12 A217-C5 A217-C9 A217-WC6 A217-WC9 A350-LF2-CL-1 A351-CF3M A351-CF8C
A351-CF8M A351-CK3MCuN A351-CN7M A352-LCB A352-LCC A494-CW-12MW A494-M-35-1 A494-N-12MV A536-65-45-12 A995-1B B564-UNS-N04400 B61
PIP PNDMV003 Gate Valve Data Sheet and Standard Terms March 2013
Process Industry Practices Page 5 of 7
Table 1 – Gate Valve Characteristics Standard Terms (continued)
Trim Material - General Material
Alloy 20 Bronze Stellite 6 Alloy B2 Alloy C Alloy C276
Mfg std Alloy 400 SS 2205 Duplex SS 304H SS 316 SS
321 SS 321H SS 347 SS 347H SS 13 Cr
Trim Material - General ASTM Number
A182-F44 A351-CK3MCuN
Trim Material - Trim Std API 594 Trim 1 API 594 Trim 10 API 594 Trim 12 API 594 Trim 5 API 600 Trim 10 API 600 Trim 11
API 600 Trim 12 API 600 Trim 13 API 600 Trim 5 API 600 Trim 8 API 602 Trim 10
API 602 Trim 11 API 602 Trim 12 API 602 Trim 5 API 602 Trim 8 API 602 Trim 9
Trim Material - Hard facing Half Full
Trim Material - Gate CI, Rubber Coating CI, Bronze Facing
Trim Material - Seat Ring - Material
Bronze
Trim Material - Stem - Material
Bronze
Type & Design - Design Type
Double disc Parallel disc Parallel expanding disc
Parallel sliding disc Knife gate
Wedge Compact wedge
Type & Design - Wedge Type
Flexible Solid Split
Type & Design - Bonnet Type
Bolted Bonnetless Extension bonnet Integral Mfg std
Pressure seal Seal welded Threaded Threaded-in
Threaded-over Union Welded Other
Type & Design - Jacket Type
Fabricated or integrally cast Full in-line jacket - PIP PNFJ8740
Full jacket - PIP PNFJ8750 NPT(F) connections
Type & Design - Bore Port Conventional Full Full - API 608 Mfg std
Reduced Regular Regular - API 599 Regular - API 608
Single reduction Standard Venturi
Type & Design - Stem Inside screw, non-rising stem Inside screw, rising stem Mfg std Non-rising stem
OS and Y Outside screw rising stem Rising stem
PIP PNDMV003 Gate Valve Data Sheet and Standard Terms March 2013
Process Industry Practices Page 6 of 7
Table 1 – Gate Valve Characteristics Standard Terms (continued)
Operation - Manual Operator
Gear Handle Handle - T-bar Handwheel
Handwheel - oval Lever Lever - bellcrank
Lever - hi-hub with lockout
Post indicator
Operation - Provided Actuator
Electric - motor Hydraulic
Hydraulic - pneumatic Pneumatic
Stem Packing & Stem Seals - Packing Material
Asbestos-free Graphite Flexible Graphite Alloy C Buna-N EPDM
FKM - Kalrez Viton, PTFE Coating FKM PFA PFA - virgin
RTFE PTFE PTFE, Filled TFE 316 SS
Stem Packing & Stem Seals - Packing Specs
Anti-extrusion rings Corrosion inhibited
Lantern ring Packing box
purged
P energized seal
Stem Packing & Stem Seals - Packing Mfr Proc
Annealed Cast Die formed
Forged Heat treated
Precipitation hardened
Other
Stem Packing & Stem Seals - Stem Seal Matl
Asbestos-free Graphite Flexible Graphite Alloy C Buna-N EPDM
FKM - Kalrez Viton, PTFE Coating FKM PFA PFA - virgin
RTFE PTFE PTFE, Filled TFE 316 SS
Stem Packing & Stem Seals - Stem Seal Type
Bellows seal Braided rings Diaphragm
Laminated Solid
V-ring - standard V-ring - twin V-ring - vacuum
Body/Bonnet Gaskets - Gasket - Material
Asbestos-free Graphite Flexible Graphite Alloy B2 Mica
EPDM FKM RTFE PTFE
PTFE, Filled TFE 304H SS 316 SS
321 SS 321H SS 347 SS 347H SS
Body/Bonnet Gaskets - Gasket - Form
O-ring Ring
Ring Joint Solid flat
Spiral wound
Body/Bonnet Gaskets - Gasket - Standard
API 600 API 602 ASME B16.20
Body/Bonnet Gaskets - Spiral-wound Type
Material
Asbestos-free Graphite Flexible Graphite Alloy B2 Mica
EPDM FKM RTFE PTFE
PTFE, Filled TFE 304H SS 316 SS
321 SS 321H SS 347 SS 347H SS
PIP PNDMV003 Gate Valve Data Sheet and Standard Terms March 2013
Process Industry Practices Page 7 of 7
Table 1 – Gate Valve Characteristics Standard Terms (continued)
Other Seals - Body - Material
Asbestos-free Graphite Flexible Graphite Alloy C Buna-N EPDM
FKM - Kalrez Viton, PTFE Coating FKM PFA PFA - virgin
RTFE PTFE PTFE, Filled TFE 316 SS
Other Seals - Body - Type Diaphragm O-ring Solid
Other Seals - Seat - Material
Asbestos-free Graphite Flexible Graphite Alloy C Buna-N EPDM
FKM - Kalrez Viton, PTFE Coating FKM PFA PFA - virgin
RTFE PTFE PTFE, Filled TFE 316 SS
Other Seals - Seat - Type Diaphragm O-ring Solid
Body/Bonnet Bolting - Bolts - Material
CS SS
304 SS Steel Alloy
Body/Bonnet Bolting - Bolts - ASTM Number
A193 A193, as applicable
A193-B16 A193-B7
A320-L7 B408-UNS-N08811
Body/Bonnet Bolting -Nuts - Material
CS SS
304 SS Steel Alloy
Body/Bonnet Bolting - Nuts - ASTM Number
A194 A194, as applicable
A194-2H A194-3
A194-4 B564-UNS-N08811
Body/Bonnet Bolting - Nuts - Type
Heavy hex
Standards - Design API 600 API 600, as applicable API 602
ASME B16.34 AWWA C500 AWWA C509
MSS SP-70 MSS SP-80 UL - FM
Standards - Dimensions ASME B16.10 ASME B16.10 - globe pattern ASME B16.10 - long pattern
ASME B16.10 - short pattern Mfg std
Standards - Rating API 602 ASME B16.34
AWWA C500 AWWA C509
MSS SP-70 MSS SP-80
Standards - Testing API 598 API 600
API 603 API 608
Gate Valve Data Sheet PNDMV003-DRevision
PIP Valve Size Range (Min/Max)PIP Valve Size
URL Min
Class
Code
Class/Fluid Type Detailed desc.Service Temp (Min/Max)User service names
End Connection
BY
Flange Face Finish Standard Ra(LRL/URL) μm
Pressure psi g Class Remarks
ASTM NumberBody General
Trim StandardHard facing req.GateSeat insert
Bonnet Seat ringStem
Remarks Remarks
Type and Design
Design Range (Min/Max) Extended BodyWedge associated with Cavity Vent to High P Side
OR associated withRemarks
Bonnet Extended Bonnet for Cryogenic Service BodyJacket No. of Connections
RemarksBore Port Stem Trim
Operation 2" Square Operating Nut
Stem Packing and Stem Seals Mfg StdPacking
Manufacturing Process Low Emission Live Loading
Mfg Std RemarksStem Seal
Body-Bonnet Gaskets Mfg Std Gasket Standard
GasketOR
Outer Ring Windings Inner Ring Filler 3 Stage Filler - outer / middle / inner Spiral-wound Type Materials
Other Seals Mfg StdBodySeat
Body-Bonnet Bolting Mfg StdBoltsNuts
StandardsDesign & RatingDimension (face to face) Testing associated Size / Range (Min/Max)Alternative Dimension (face to face) associated Size / Range (Min/Max) Remarks
Face to Face Dimension in Valve Orientation Inclination Angle degCenterline to Operator Top ft Dry Weight lb (from horizontal)
Additional Information
Notes
Oxygen Cleaned per CGA C-4.1 and G-4.4/ASTM G-93
TypeRemarksMaterial ASTM Number
RemarksMaterial Type
RemarksMaterial Form
Manual Operator Provided Actuator Remarks
Material Specifications Remarks
Material Type
TypeValve Size
Manufacturing Process
Material ASTM Number
Pressure Rating
Body/Bonnet Material Trim MaterialMaterial ASTM Number Material
Type Style Ends Standard Remarks
PIP Line Class
Service
Pressure (Min/Max) psi
Purchaser Alternative Valve CodesSub-catalog Sub-catalog Code Sub-catalog Code Sub-catalog Code
Purchaser Line ClassesSub-catalog Sub-catalog Class Sub-catalog Class Sub-catalog Class
Recommended Manufacturer/Supplier Valve Details Valve Size / RangeCompany Name Model Number Drawing Number Size Max Approved
Owner/Role/URL Purchaser
PIP Catalog Valve Number
Catalog Name Current valve ofValve Code Number
PIP Revision
Date Remarks
°F