Embed Size (px)
Citation preview
GSC2miniPneumatic/Hydraulic Timer Based Valve-Gate Sequence Controller
INCOE® CorporationGlobal Headquarters2850 High Meadow CircleAuburn Hills, MI 48326 USAT: +1 (248) 616-0220E: [email protected]
Technical Support:T: +1 (248) 556-7790E: [email protected] Service and SalesT: +1 (248) 556-7770E: [email protected]
▪ Easy controlling and identifying the sequential status of up to 8 gates
▪ Supporting Modes A/B/B2
▪ Manual Output Function
▪ Compact Size, Lightweight
Multi-Gate Sequencing
INCOE® Global Headquarters | 2850 High Meadow Circle | Auburn Hills, MI 48326 USA | T: 248-616-0220 | E: [email protected] | www.incoe.com©2018 INCOE® 03/18
GSC2mini Pneumatic/HydraulicTimer Based Valve-Gate Sequence Controller
ECONOMICAL MULTI-GATE SEQUENCING
The GSC2mini is a compact, lightweight, timer based, pneumatically/hydraulically actuated sequencing controller. Easy controlling and identifying the sequential status of up to 8 gates. The GSC2mini is ideal for valve-gated applications that do not require sensors or linear transducer control.
FEATURES
▪ Set delay and open times ▪ 3 modes of operation ▪ Easily upgrade from 2 to 4 or 8 gates (pneumatic only)▪ Compact, lightweight controller (10 1/4” L x 7 1/2” W x 4” D)
BENEFITS
▪ Easy controlling and identifying the sequential status of up to 8 gates▪ Compact and lightweight controller
POWER - (GSC2mini controller)
▪ Main Power Input: 115/120/220 VAC▪ Signal Input Power: 24 VDC from Machine when Injection Forward▪ Solenoid Valve Output Power: 24 VDC Max 1.5A per gate
MODES OF OPERATION
▪ Mode A: Set the Delay time only for each gate. All gates will remain open during injection cycle
▪ Mode B: Set the Delay and Open time for each gate▪ Mode B2: Set (2) Delay and (2) Open times for each gate
COMPLETE PNEUMATIC PACKAGE INCLUDES:
▪ GSC2mini Controller with Power Cord▪ Pneumatic Valve Stack (2, 4 or 8 gates), Cable, Air Fittings and Airline Tubing▪ Injection Molding Machine Input Signal Cable (24VDC)
COMPLETE HYDRAULIC PACKAGE INCLUDES:
▪ GSC2mini Controller with Power Cord▪ Hydraulic Valve Stack (8 gates only), Pump (240 or 480VAC),
Tank (hydraulic power pack), Hoses▪ Injection Molding Machine Input Signal Cable (24VDC)
To learn more about INCOE’s new GSC2mini and other INCOE products, visit www.incoe.com.
GSC2mini Controller and 8 Zone Pneumatic Valve Stack (shown)
