P.O BOX: 7323, DUBAI, UAE. TEL: 04-3404000, FAX: 04 ... · PDF fileOrganization Structure and CV’s of Key ... Supervisors Asst. Safety QC Inspector Stores ... and Project co-ordination

P.O BOX: 7323, DUBAI, UAE. TEL: 04-3404000, FAX: 04-3403033 P.O BOX: 32679, ABU DHABI, UAE. TEL: 02-6712820, FAX: 02-6726566

Email: [email protected] Website: www.albanna-eng.com

AN INTRODUCTION

TO

ALBANNA ENGINEERING (ISO 9001:2008, ISO 14001:2004, OHSAS 18001:2007)

Turnkey Contractor for Industrial Projects

SPECIALIZED IN

Storage Tanks Fabrication & Installation

Pressure Vessels & Furnaces

Structural Fabrication & Installation

Piping Fabrication & Installation

Electrical & Instrumentation Works

Industrial Civil Works

Metering Skids

TABLE OF CONTENTS

Mission Statement and Scope of Services and Supplies

Introduction

Company Details

Organization Structure and CV’s of Key Personnel

Certification of Personnel & Quality Assurance

Plant, Equipment and Workshop

Project Details

Project Highlights

Appreciations

MISSION STATEMENT, OBJECTIVE AND VALUES

Albanna Engineering (ABE) is dedicated to providing timely and efficient EPC services to the oil and gas and process industries in the United Arab Emirates and abroad. Objectives: Values:

Profitability and Growth, through Customer Satisfaction

Professionalism, Dedication and Team Spirit

SCOPE OF SERVICES AND SUPPLIES Fabrication / Erection: Structural Steel Pipe Works, Pipe Racks Storage Tanks, Silos, Furnaces Pressure Vessels, Paint work including Pipes Internal Coating Pre-engineered buildings Supplies: Fire Fighting Systems Equipment Conveyor Systems Handling Equipment Wear Plates Castings Services: Engineering and Detailing Architectural Civil Mechanical E and I piping Repairs and Maintenance

INTRODUCTION

Albanna Engineering (ABE) is a member of a modern and dynamic business group

operating in the United Arab Emirates.

Albanna Engineering provides turnkey mechanical contracting services to the Oil and

Gas, Process and Engineering Industry in the United Arab Emirates and

internationally. In addition to its mechanical contractor profile, ABE provides

associated design, civil works, electrical / instrumentation services.

The company was created in 1997 in response to the growing needs for engineering

services. At the time of writing, the company has 700 qualified employees and caters

for projects such as oil storage tanks, piping, pipelines, structural steel fabrication,

erection and equipment installation.

ABE maintains a Quality Management System conforming to ISO 9001: 2008,

ISO 14001: 2004 and OHSAS 18001: 2007. The QMS has been certified to those

standards by BVQI in July 2004. ABE has also received the ASME “U” stamp for

manufacture of pressure vessels. Albanna Engineering is registering with UAE Civil

Defence as an approved contractor for Fire Fighting Systems installation and

maintenance.

COMPANY DETAILS

ADDRESS: P.O. Box 7323, Al Quoz, Dubai, UAE Tel: 04-3404000 Fax: 04-3403033 Email: [email protected] Website: www.albanna-eng.com P.O. Box 32679, Abu Dhabi, UAE Tel: 02-6712820 Fax: 02-6726566 BANKERS: First Gulf Bank P.O. Box 52053, Dubai – UAE Tel: 04-2941234 Fax: 04-2950457 Al Khaliji France S. A. P. O. Box 4207, Dubai - UAE Tel: 04-2222291 Fax: 04-2279861 AUDITOR: K.P.M.G P.O Box 3800, Dubai, UAE Tel: 04-4030300 Fax: 04-3301515 LAWYER: Ali Safar and Associates P.O. Box 2729, Dubai – UAE Tel: 04-2246800 Fax: 04-2246900 ENCLOSURES: Company Registration – Dubai Industrial & Trade License – Dubai Membership to Dubai Chamber of Commerce Trade License – Abu Dhabi Membership to Abu Dhabi Chamber of Commerce Trade License – Fujairah Location Map

TOTAL STRENGTH Total No. 700

STAFF1 GENERAL MANAGER2 DY.GENERAL MANAGER3 OPERATIONS MANAGER4 ENGINEERING MANAGER5 QA MANAGER6 PROJECT MANAGERS7 HR & ADMIN MANAGER8 PURCHASE MANAGER9 LEAD ENGINEERS

10 QC ENGINEERS11 QA AUDITORS12 ESTIMATION ENGINEERS13 DESIGN ENGINEERS14 PROJECT ENGINEERS15 SITE SUPERVISORS16 QUANTITY SURVEYOR17 DRAUGHTSMEN18 SAFETY OFFICERS19 ESTIMATORS20 ADMINISTRATION / OFFICE STAFF21 ACCOUNTS PERSONNEL22 IT SPECIALIST23 WORKSHOP IN-CHARGE24 PURCHASE STAFF

TYPES OF TRADESMEN1 FOREMAN2 CHARGEHANDS3 STOREKEEPERS4 ELECTRICIANS5 WELDERS (SMAW / GTAW / GMAW)6 FABRICATORS (STRUCTURAL / PIPING)7 RIGGERS8 PAINTERS9 BLASTERS

10 CRANE OPERATORS11 DRILLING / ROLLING MACHINE OPERATOR12 DRIVERS13 MECHANICS14 FORKLIFT OPERATORS15 CARPENTERS16 MASONS17 STEEL FITTERS18 PLUMBERS19 LABOURERS

Corporate Development

Business Development.

Manager Engineering

Manager Operations

Manager QA & HSE

Finanace Controller

ALBANNA ENGINEERING ORGANISATION STRUCTURE

CEO SAEED AHMED

ALBANNA

GENERAL MANAGER MATHEW KAVALAM

DEPUTY GENERAL MANAGER

BISWADEEP DAS

Purchase Manager

Head HR & Admin

Lead Engineer Planning

Lead Engineer Design

Lead Engineer- Commercial

Sr.Manager/ Project

Managers Works Incharge

Electrical/ Maintenance

Incharge

Lead HSE Officer

Lead Engineer QA/QC

Manager Accounts

Purchase Officers

PRO / HR Officer

Planning Engineer

Design Engineers

Estimation Engineer

Sr.Project Engineers/En

gineers

Works Engineer

Electrical/ Maintenance

Engineer

Safety Officers

QC EngineerAccountants/

Stores Incharge

Purchase Assistants

HR/ ADMIN/ IT Officer

Asst. Planning Engineer

Designers & Checkers

Quantity Surveyors

Supervisors Supervisors Supervisors Asst. Safety QC Inspector Stores

Secretarys Draftsman Foreman Foreman Foreman Foreman

Chargehands, Fabricators, Fitters, Welders, Riggers, Operators, Drivers, Blasters, Painters,Carpenters, Masons, Grinders, Steel Fixers, Gas cutters, Electrician, Mechanic,

Helpers

EDUCATION:

B Tech. Degree in Mechanical Engineering from University of Kerala, India.

HIGHLIGHTS:

27 Years of work experience in Oil & Gas/Petrochemical/Power Projects as in-charge of

detailed engineering, construction, project co-ordination and project management.

Associated with the successful completion of various mechanical/piping/pipeline

installation projects of EPPCO (Dubai), ENOC (Dubai), ADNOC (Abu Dhabi), Dubai

Drydock (Dubai), Vopak ENOC Ltd (Fujairah), Fujairah Refineries (Fujairah), Emarat

(Dubai & Sharjah), Water & Electricity Department (Abu Dhabi) and various projects in

India.

Experienced in shutdown jobs and expansion projects of oil refineries, petrochemical

plants and oil terminals.

Review and analysis of technical documents/drawings/method statements and detailing

jobs.

Familiar with execution of fast track projects.

Well conversant with international codes and standards pertaining to mechanical

installation projects (ASME, ANSI, API, etc).

WORK HISTORY:

DATE TITLE COMPANY COUNTRY 1995 – 2000 Construction Manager Mc Connell Dowell ME LLC UAE

1994 – 1995 QA/QC Engineer ABB Sae Sadelmi UAE

1990 – 1994 Project Engineer Hindustan Antibiotics Ltd India

1989 – 1990 Piping Engineer Petron Engineering Construction Ltd India

1985 – 1989 Construction Engineer Aban Constructions India

MATHEW KAVALAM Position: General Manager Since: 2000

EDUCATION:

Degree in Mechanical Engineering.

Certificate Course in Piping Design.

Training in Plant Design System (PDS) and Plant Design Management System

(PDMS).

HIGHLIGHTS:

20 Years of experience in Design and Projects in Oil & Gas Industry.

Piping Detailed Engineering in Sulfur Recovery Unit.

Detailed Engineering and Project co-ordination in Permanent Oil Tanker Berth

Detailed Engineering and Project co-ordination in Gas Oil Tank farm.

Piping Stress Analysis in Linear Alkyl Benzene Plant.

Piping Stress Analysis in Visbreaker Unit.

Lead Piping Engineer in Natural Gas Boosting Station.

Piping Engineer for Formaldehyde Technology Transfer.

WORK HISTORY: DATE TITLE COMPANY COUNTRY 2000-2002 Sr. Piping Engineer UHDE India Ltd. India 1999-2000 Sr. Piping Engineer Perstorp AB. Sweden 1995-1999 Piping Engineer UHDE India Ltd. India 1992-1995 Plant Engineer Thermolab. India

BISWADEEP DAS

Position: Dy. General Manager Since: 2002

EDUCATION:

Degree in Mechanical Engineering

Senior Certified Welding Inspector(SCWI) – AWS

Radiography Interpretation – Level II

Magnetic Particle Inspection – Level II

Liquid Penetrant Testing – Level II

Lead Auditor – IRCA Certification in ISO 9000

Lead Auditor – IRCA Certification in OSHAS 18001

Diploma in ISO 9000 & Quality Control Industrial Safety Management

HIGHLIGHTS:

Incharge of QA/QC activities of Civil & Mechanical works for Amine & Sulphur

recovery unit at Fujairah.

Incharge of QA/QC activities for Additional Tankage Works including Tanks & Piping.

QC Supervisor for Crude Oil & Sea water line.

QC Engineer for Major Oil Lines, Gas Lines and Water line projects.

Incharge of Development for Welding Procedures, Training & Qualification of

Welders, Welding Consumables Testing as per AWS standards.

Approved ISO – 9000 Internal Auditor for Bharat Earth Movers Ltd, India

Preparation of Quality Procedures and related documents.

Fabrication Engineer in the field of Pressure Vessels, Heat Exchangers and Pressure

Tanks.

WORK HISTORY:

DATE TITLE COMPANY COUNTRY 2000 – 2002 QA/QC Engineer Gecat Ltd. Co. K.S.A.

1995 - 2000 Welding Engr. Bharat Earth Movers Ltd. India

1992 – 1995 Fabrication Engineer T.E.A.M. India

A.V. MANNAVAN Position: Manager QA & HSE Since: 2002 Management Representative – Integrated Management System

EDUCATION:

B. Tech Degree in Civil Engineering

HIGHLIGHTS:

Over 20years of experience in engineering project management, engineering coordination of EPC projects in Oil & Gas, Marine, Offshore and Industrial projects.

Experienced in design, detail engineering and construction engineering. Development of engineering deliverables list, estimation of Man-hours, Cost Time

Resource, Scheduling and Control & Progress Reporting for designand drafting works.

Assign, supervise, monitor and control the activities of design engineers and draftsman.

Administer Change control over project scope and monitoring and controlling of KPI’s.

Co-ordination with project managers, Clients, Operations, Quality Control, Planning & Procurement departments.

Co-ordinate with of Sub-Consultants, Contractors, Vendors & Review of their Drawings / Documents.

Review of discipline related material requisitions, technical bid evaluation, vendor / sub-contractor selection.

Participate in estimation, costing and preparation of budgets for projects / bids. Conversant with industry standards, specifications and design codes and major

company specifications. Familiar with ISO 9001 procedures and QHSE management systems followed in

industry. WORK HISTORY:

DATE TITLE COMPANY COUNTRY

2000-2011 Lead Engineer/ Engineering Coordinator

Maritime Industrial Services (MIS)

UAE

1998-2000 1993-1998 1991-1993

Sr. Structural Engineer Sr. Structural Engineer Design Engineer

Serimer / ETPM Maritime Industrial Services (MIS) Zosel Consulting Engineers

UAE

UAE

UAE

JOBI GEORGE Position: Engineering Manager Since: 2011

EDUCATION:

Bachelor of Technology in Civil Engineering.

Year Of Passing June 1995, from M G University Kerala, India

Diploma in Management.

HIGHLIGHTS

15 years of experience in projects execution and planning in the Waterproofing and

GRC Claddings with an excellent background in construction.

Experienced in developing and implementing Project Management, Estimating, and

Project Development.

Managing and optimizing the contracts program whilst minimizing costs and ensuring

budgetary control and contract completion to deadline.

Manage the cost control of a project ensuring that projects are delivered on budget.

WORK HISTORY:


2003 – 2009 Contracts Manager Beam Engineering & UAE Construction (Gulf) Ltd 2000 – 2003 Project Manager Beam Engineering & UAE Construction (Gulf) Ltd 1997 – 2000 Sr. Projects Engineer Robodh Contracting Co UAE

1995 – 1996 Jr. Engineer Somdutt Builders India

JINOY VISWAN

Position: Business Development Manager Since: 2010

EDUCATION:

Degree in Mechanical Engineering from Kerala University, HIGHLIGHTS:

Over 33 years of experience in the construction Industry.

Long project execution experience in Oil & Gas/ Petrochemicals/ Atomic

Power/Steel Plants in India, KSA & UAE.

In-charge for several construction and maintenance contracts for the fabrication

and installation jobs related to piping, tankage, equipment, structural etc.

Was responsible for various long and short form contracts (Project management

& execution) in Rastanaura Terminal, Refinery, Jauyma Gas Plant, Abqaiq Gas

Plant, Rabiq Refinery, Riyad Refinery, Yambu Refinery and Berry Gas Plant of

Saudi-Aramco.

Familiar with International codes and standards relevant to piping, storage tanks

and vessels and inspection requirements.

WORK HISTORY:


2005– 2006 Project Manager Danam Engineering U.A.E.

1994-2002 1986-1994 1980-1986 1974-1979

Project Manager Project Engineer Construction Engineer Scientific Officer/ Engineer

Arabian Pal. Co. Oil Palm India Simon Carves India Madras Atomic Power Plant

Saudi Arabia India India India

A. JOHN THAMPY Position: Project Manager Since: 2006

EDUCATION:

Bachelor of Engineering in Mechanical Engineering HIGHLIGHTS:

Over 20 years of experience in Operations and Projects

Operations of process equipments

experience in fabrication and erection of steel structures

broad knowledge of International Standards (B.S. Standards and American

Standards)

Extensive knowledge of piping fabrication, erection, painting

Inspection of equipments, vessels, pumps, valves

Worked in the tendering section for a certain period.

WORK HISTORY:


1986 - 2006 Senior Engineer Hindustan Antibiotics Limited India

MILIND KHULE Position: Project Manager Since: 2006

EDUCATION:

DIPLOMA IN MECHANICAL ENGINEERING

HIGHLIGHTS:

Over 17 years of experience in Planning and Site Construction of API Vertical Storage Tanks, Pressure Vessels & Piping.

Review of Project Progress and implementation of necessary Action Plan for the achievement of targeted completion, Controlling Manpower, Equipment & Materials during execution of Projects. Co ordination with other departments for timely completion of projects, co-ordination of onsite activities at construction stage. Preparation of Monthly & Weekly progress reports. Co-ordination with client, consultant third party inspection agencies and statutory authorities. Implementation of client’s EHS policies at site.

Additional Tankage at EPPCO Terminal Fugairah – The project consists of construction of three vertical storage tanks (36 m Dia. X 23 m High, 28 m x 23 m High & 20 m Dia x 20.5 m High) for Turbine Aviation Fuel Storage including Civil Works.

Re-bottoming of Tanks at EPPCO Terminal at Jebel Ali.

EPCL Jebel Ali - Construction of 4 Nos Vertical storage Tanks at Jebel Ali Plant of Diameter varies from 6 m to 15 meters. Demolition & Reconstruction of 30 m diameter Tank at EPCL Jebel Ali.

ENOC Terminal Jebel Ali – Construction of 19 Nos. API 620 Vertical Storage Tanks of various diameters for their Chemical Terminal.

Dubai Air Port – Construction of 4 Nos. Jet fuel storage tanks of 22.5 mtrs. Dia. For Department of Civil Aviation, Dubai.

WORK HISTORY:


1990-1995 PROJECT ENGINEER PHILLS ENGG. CORPORATION BOMBAY

1995-2006 PROJECT ENGINEER CYLINGAS COMPANY L.L.C. UAE

BABU AMBALAKANDI Position: Project Manager Since: 2006

EDUCATION:

Bachelor of Technology Degree in Mechanical Engineering

Diploma in Advanced Computing

HIGHLIGHTS:

Experience in machinery construction processes, heat treatment

Experience n maintenance of machinery, spare parts planning, management of

construction equipment

Experience in quality surveying, estimation

Conversant with quality and safety specifications (ISO, OHSAS)

Familiar with estimation and planning of civil works projects

WORK HISTORY: DATE TITLE COMPANY COUNTRY

2000 – 2001 Maintenance Engineer Albanna Conwood U A E Estimation and Planning Engineer 1998 – 1999 Trainee Engineer Kerala Automobiles Ltd. India

ROSHAN MADHU M.K.

Position: Lead Engineer – Proposals Since: 2001

EDUCATION:

Bachelor of Technology in Mechanical Engineering. TRAINING IN SPECIAL SKILLS

Post Diploma for “PIPING DESIGN & ENGINEERING” Training of piping Design Soft Ware SP3D, Training of piping Analysis Soft Ware CAESAR-II.

HIGHLIGHTS:

Stress analysis for critical systems like Flare lines, high pressure and temperature lines

of CS, AS, SS and other Nickel alloy materials.

Performed Static analysis for various operating conditions such as Design, Operating,

Wind, Seismic, and Relief Valve.

Piping stress analysis (using CAESAR II) of Lines connected to Columns, Towers, Heat

exchangers, Pressure Vessels, Pumps, Air Coolers, Rack piping etc.

Execution of piping design through 3D modeling software.

As-Built package Preparations using 3D modeling software & Laser Scan.

Consistency checking of PID’s, Isometric checking.

Preparation of Tie point Spec, Demolition drawings.

Preparation of MTO’s & MST’s

Projects Handled:

SPE - II -The Dow Chemicals, Spain. APDC -The Dow Chemicals, Freeport, Texas. OISM -The Dow Chemicals, Freeport, Texas. TLE Exchanger Replacement, St Charles, Louisiana. INDUS -The Dow Chemicals, India. Revamp Projects for Site Operations of Dow Chemicals.

WORK HISTORY DATE TITLE COMPANY COUNTRY

2006– 2011 Piping Engineer Technip India Ltd. INDIA

VIMALRAJ SACHITHANANDAM

Position: Design Engineer-Piping Since: 2011

EDUCATION:

Diploma in Civil Engineering

Certificate in Entrepreneurship Development

HIGHLIGHTS:

Over 23 Years of experience in Civil Construction

Installation of Amine unit and Sulphur recovery unit

Hydroelectric projects & Dams, Power house, tunnel driving and survey works

110 KV and 220 KV Electrical sub stations.

Construction of LPG Bottling plants

WORK HISTORY: DATE TITLE COMPANY COUNTRY 1995 – 2002 Government Contractor Kerala State Electricity Board India 1993 – 1995 Civil Engineer Middle East Engineering Saudi Development Agency/Hyundai Arabia 1990 – 1993 Sub Engineer Kerala State Electricity Board India 1986 – 1990 Site Engineer Associated Construction Co. India 1984 – 1986 Civil Engineer Fact Engineering & Design India Organization (FEDO)

C. J. JOLLY

Position: Sr. Project Engineer Since: 2002

EDUCATION:

Diploma in Mechanical Engineering

HIGHLIGHTS:

Site Supervisor for the conversion project of vessel FPSO MYSTRAS top side piping.

QC Supervisor for Amine Unit & Sulphur Recovery Unit.

Site Supervisor of the EPC project - Inline Polyol Blending Facility.

Shop supervisor for the fabrication and painting job of approx. 1100 ton steel

structures & in charge of structural steel fabrication for different projects.

Site supervisor for piping projects.

Erection supervisor for the plant relocation project.

Construction supervisor for 2 nos. Sulphuric acid tanks.

Workshop in charge for fabrication of EOT, Lifts, Under slung cranes etc.

WORK HISTORY: DATE TITLE COMPANY COUNTRY 1996 – 1998 Work Shop In Charge M/s S. Crane Engg. Works India

JISEN M.V.


EDUCATION: Diploma in Mechanical Engineering

HIGHLIGHTS: 16 years of experience in Fabrication, Installation of Mechanical structural, pipe rack

modules, Storage tanks, Smelter Furnaces and High pressure Piping in the Oil and Gas industry.

Handled projects in the range of 10 to 50 million dollars Providing the Project Manager with support to manage the day to day affairs of the

assigned project insofar as fabrication & Mod Assembly. Assist in developing and maintaining a strong working relationship with the owner’s Project

Management Team (PMT), Construction Management Team (CMT), Engineering. Manage our projects using the established key performance indicators( KPI’s) Assist in developing and ensuring that system inputs and related processes are efficient

and consistent with the company’s business needs. Star Energy: Piping and pump station works with CBI EASTERN LTD for Star Energy.

Worked as Project Engineer in this project and was assigned for the fabrication and erection of Tank farm, Berth and Pump house Piping.

Dubai Electricity and Water Authority: Erection of two tanks of 30DiaX14mtr height for diesel storage tank. These tanks where column Supported and were erected with Hydraulic Jacking method.

Dubai Aluminum: Installation of over 15 Smelter Aluminum Furnaces including the billet Casting Machine and its auxiliary equipment.

WORK HISTORY:


2008 - 2009 Project Co-Ordinator Flint Energy Services Ltd CANADA

1997 - 2008 Sr.Project Engineer Ghantoot General Mechanical Eng U.A.E

1993 - 1997 Construction Engineer ABB Power Segment India

GIRISH MANDAPATI Position: Sr. Project Engineer Since: 2009

EDUCATION:

B Tech in Mechanical Engineering from Calicut University - India

HIGHLIGHTS:

Experience in the design of pipelines and pipeline networks in major oil installations

and oil fields

Familiar with the installation and commission of APPS / SCADA systems.

Familiar with the mechanical maintenance and marine coating projects of naval

ships and ship lifts.

Experience in the coordination and execution of complex and fast track projects.


2003 – 2004 Execution Engineer Natal Contracting and Oman Trading Co. LLC 2001 – 2003 Application Engineer Syscontrol Solutions India India Pvt. Ltd.

AJEESH E. J.


PROFESSION:

Mechanical Engineer TRAINING IN SPECIAL SKILLS:

ASNT LEVEL-II in RT,UT,MT&PT

Undergoing Graduate Program in Project Management of Oil and Gas pipe line

Projects (Distance Education –NICMAR) HIGHLIGHTS:

Project In Charge for Marine Piping projects (Fabrication and Installation) for

Drydocks, Dubai

Project Engineer, Horizon Jebel Ali Terminal Expansion – Phase 2 which was an EPC

Contract for design, fabrication, erection and commissioning of 11 Storage Tanks,

associated piping, structural and loss prevention system in live terminal.

Worked with 195 MW Steam Turbine Generator Power Plant Executions &

Commissioning Projects (Client: Bharat Heavy Electrical Ltd-India)

Handled Administration and archiving of Project QA/QC Documents for various

projects.

WORK HISTORY:


2004 - 2005 Project Engineer (Columns, Vessels, Piping,Tanks)

Newton Engineering and Chemicals Ltd India & Oman

2000 - 2004 Project Engineer (Power Plant Execution and Commissioning)

Universal Erectors Ltd. India

BINU B Position: Sr. Project Engineer Since: 2005

EDUCATION:

Bachelor of Science in Electrical Engineering

Registered Master Electrician

HIGHLIGHTS:

Skilled in industrial building wiring installation

Electrical power equipment trouble shooting and maintenance

Testing and commissioning LV/HV equipments

Design and execution of electrical contracts

WORK HISTORY:


2004 - 2006 Department Head Ever Gotesco Company Philippines

2003 – 2004 Production Engineer TASCOR Philippines

1999 – 2003 Electrical Engineer Well’s Darwin Inc Philippines

1993 – 1999 Field Supervisor

OFD Electromechanic Philippines

ONOFRE CAMORONGAN Position: Electrical Maintenance Engineer Since: 2006

EDUCATION:

Diploma in Civil Engineering. Civil Drafts man

HIGHLIGHTS:

Handling different sites of Industrial building, Industrial Shed, School Building,

Apartments.

Extensive Knowledge in guiding labourers for R.C.C., Block works, Flooring work,Steel

structure and in all the construction related work.

Co-ordinating with the queries of projects with the Client, Consultant & Site Engineers.

Worked as a Civil Engineer for various projects of different companies like Precision

Wire Pvt Ltd, Gujarat Polysol, R.R.Kabel Pvt. Ltd, Craft Corner Paper Mill Pvt Ltd, Kwality

Paper Mill Pvt Ltd, Apurva Chemical Pvt Ltd, Narendra Impex, Narendra Polyprint,

Polycab Wires Pvt ltd, Kalpana Industries pvt Ltd & Various project of Residential

Building.

Worked as a Site Supervisor for Filtration Plant in Eppco.

Worked as a Site Engineer for Industrial Shed for Palm Marine.

WORK HISTORY:


2001 - 2004 Civil Engineer P. R. Construction & Company. India

BHAVIK V. SOMPURA Position: Civil Engineer Since: 2005

EDUCATION:

Bachelor of Engineering (Mechanical) ASNT LEVEL-II in RT ASNT LEVEL-II in MPI ASNT LEVEL-II in PT Welding Inspector CSWIP

HIGHLIGHTS:

Effective implementation of quality management system. Checking and approval of site quality procedures, inspection and test plans. Administration and archiving of quality records. Familiar with various ASME, AWS, and API codes. QC documentation review of test packs. Review of welding procedure specifications, procedure qualifications for various classes

as per relevant approved procedures followed by performance tests for welders Implementation of safety aspects Surveillance on day to day erection activities including material check and visual

inspection for pipes, elbows, bends, valves and supports, check on consumables, fit up and alignment inspection, welding, preheating and post heating, visual inspection after welding and repairs.

Preparation of measurement plans for receipt inspections of pipes, fit-up inspection, weld visual inspection, hydro and pneumatic testing of pipe spools, final dimensional inspection followed by blasting and painting.

Review of WPS/PQR for materials of carbon-steel, stainless steel, and alloy steels. Interpretation of drawings Conducting performance tests for welders (WPQ) Administered in the preparation of QAP/QCP for different fabrication activities. Preparation of test packs, pre inspection prior to hydro testing

WORK HISTORY:


2004 – 2005 QA / QC Engineer INCO Intl. FZE Co. U.A.E.

2002 – 2004 QA / QC Engineer Larsen & Toubro Limited ECC Division

India

1999 – 2002 Project Executive Wel-tech Rectors India

GOPALSAMY K. Position: QA / QC Engineer Since: 2005

EDUCATION:

B.Tech in Mechanical Engineering. ASNT LEVEL-II in RT ASNT LEVEL-II in UT ASNT LEVEL-II in MPI ASNT LEVEL-II in PT

HIGHLIGHTS:

Effective implementation of quality management system. Checking and approval of site quality procedures, inspection and test plans. Administration and archiving of quality records. Familiar with various ASME, AWS, and API codes. QC documentation review of test packs. Review of welding procedure specifications, procedure qualifications for various classes

as per relevant approved procedures followed by performance tests for welders Implementation of safety aspects Surveillance on day to day erection activities including material check and visual

inspection for pipes, elbows, bends, valves and supports, check on consumables, fit up and alignment inspection, welding, preheating and post heating, visual inspection after welding and repairs.

Preparation of measurement plans for receipt inspections of pipes, fit-up inspection, weld visual inspection, hydro and pneumatic testing of pipe spools, final dimensional inspection followed by blasting and painting.

Review of WPS/PQR for materials of carbon-steel, stainless steel, and alloy steels. Interpretation of drawings Conducting performance tests for welders (WPQ) Administered in the preparation of QAP/QCP for different fabrication activities. Preparation of test packs, pre inspection prior to hydro testing

WORK HISTORY:


2005 - 2006 QA/QC Engineer Alshabia Engineering UAE

2003 - 2005 QA/QC Engineer M/S Bhageeratha Electrical&Structural Ltd

India

VINOD M. R. Position: QA/ QC ENGINEER Since: 2006

EDUCATION:

Bachelor’s Degree in Mechanical Engineering Certified on CSWIP 3.1 Welding Inspector Certified on QMS Lead Auditor/Auditor- ISO 9001-2008 Certified on BGAS Grade. 3 Painting Inspector Certified on ASNT Level II in PT, MT and RI

HIGHLIGHTS:

A dynamic professional with 7+ years of experience in Quality Control/Assurance of Incoming Material/Parts Inspection, In-process Inspection, Final Products Inspection, Process Enhancement on Site/shop Inspection pertaining to Oil& Gas Petrochemical, Power Boiler, Transmission Line Sectors.

Effective implementation of quality management system.

Performing welding inspections; involved in fabrication of Pipe Spools, Vessels, Tanks for power boilers, desalination plant equipment, oil & gas Petrochemical Sectors etc.

Witnessing inspection encompassing Raw Material, fit ups, welding, VDI, Hydro, blasting, painting, final box up of Pipe Spools, Vessels, Tanks etc.

Witness of welder’s qualification test on GTAW/SMAW welding Process.

Witness, Reviewing and monitoring of WPS, PQR and WPQR as per ASME SEC IX requirement.

Monitoring and signing of all relevant documents like MTC, ITP’s, NDE reports (PT/MPI/UT), Welding records WPS/PQR & WQT’s, PMI/HT/PWHT and review of RT films, etc.

Preparing of As- Built Dossiers for final client approval.

Maintaining co-ordination with contractors, subcontractors and vendors on work progress, drawing modifications field change, change of material, site modification, Technical Query etc.

Experienced in conducting vendor/site/shop inspection ascertaining all material supplied is as per the standards and specification.

Adequate knowledge on international codes, standards & specification such as ASME codes,

o API/ ASTM standards, SABIC specifications, etc. WORK HISTORY:


2007 - 2009 QA/QC Material Inspector Foster Wheeler Arabia Ltd KSA

2006 - 2007 QA/QC Welding Supervisor Alstom Power Centrales KSA

2004 - 2006 QA/QC Engineer Larsen and Toubro Ltd India

PRABU CHANDRASEKARAN Position: QA/QC ENGINEER Since: 2009

EDUCATION:

Bachelor of Science – Physics - Mumbai University.

Diploma in Industrial Safety - Indian Institute of Management & Technology – India NEBOSH - International General Certificate in Occupational Safety & Health passed with

Credit. IOSH Managing Safely Certified OHSAS 18001 LEAD AUDITOR COURSE -TUV Nord Middle East OSHA – Construction Industry Safety & Health – Dubai. HAZOP for Team Leader – TUV Nord Middle East

HIGHLIGHTS:

As per Health and Safety policy of company, promote a positive safety culture in the organization.

Assist higher authority in implementing and maintenance of safety system in line statutory requirement.

Investigate incident, record the findings and report the same to the management. Responsible for hazard identification, conduct environment study and submit to the

management. Induction of all level specialized training according to the need of group personnel, work

procedure, developed implementation and adherence policies for the client system. Conduct regular safety inspection / audits to all work sites, HSE training to all people,

impart training of mock drill and emergency procedure and benchmark safety performance in many perspectives.

Identify project specific requirements of statutory bodies and formulate-implement plans to comply with the same.

Organize meetings-presentation to disseminate statutory body requirements within owner contractor, subcontractor & supplier organization.

Arrange first aid training and other relevant training programme. (B.A. set, H2S gas, PTW system) as and when required.

Prepare, control and implement the project safety plan and advice on safety matters at all stages of the project.

Monitor-report safety statistics identify the trends & areas requiring more attention for risk reduction & improvement.

Review safety performance statistics, initiate actions for improvement, set safety targets & plan to enhance safety.

Prepare Monthly Safety Statistics from various sites and report to management. WORK HISTORY:

Date Title Company Country

2006 to 2011 Site Safety Manager / Sr. Safety Officer

ETA – ASCON Group of Companies. UAE

2002 to 2006 Safety Officer Voltage Engineering Ltd Qatar

2000 to 2002 Assistant Safety officer Hindustan Lever Ltd (Sewri Warehouse) India

1998 to 2000 Safety Supervisor Sunil Electric & Engineering Works India

VIKRANT R. KHADYE Position: Sr. Safety Officer Since: 2011

EDUCATION:

Bachelor of Arts

IOSH ( INSTITUTION OCCUPATIONAL SAFETY HEALTH ) ( Managing safely course. U.K. Certified.) Diploma in computer application

Safety training observation programme ( STOP )

Safety supervision workshop ( Training )

Safe Managing worksite ( Training )

HIGHLIGHTS:

Career development in the field of oil and gas

17 years overall experience. in construction of oil & gas projects

Preparation Daily safety reports weekly/ monthly

Conducting safety meeting / training at all levels

Inspection


2003 – 2005 Asst. HSE Officer Tech sharp Engineers (PVT) Sub-Contractor to PETRO FAC INTL. SHJ

India/U.A.E

1998 – 2003 Asst. HSE Officer Lloyds Insulation Let., Mumbai India

1993 - 1998 Admin. Clerk Thoufeeque Al-Quthan Trading & contracting

K.S.A.

1988 - 1993 Sales Executive Various Pvt. Companies in India India

SURENDRAN CHODON KANDY Position: H.S.E. OFFICER Since: 2006

EDUCATION

NEBOSH [IGC], UK American Society of Safety Engineers(USA) -Safety Professional PCFZC-Govt of Dubai-Registered Safety Professional First Aid-Indian Red cross 'HSE LEADERSHIP TRAINING’ from IACET, USA Computer Automated Designing& Drafting [CADD] Diploma in fire Safety Engineering Bachelor of Science in Environmental engineering from,[WCU-Central panama] USA,

final year. HIGHLIGHTS

Anticipating, monitoring, identifying &evaluating hazardous conditions and practices Documentation of safety records& inspection records. Ensuring the PTW,MS&RA for all hazardous activities & to investigate on all accidents,

incidents & near miss, to study further to avoid recurrence Inspection of fall protection equipments, lifting tackles Mechanical and Electrical

equipments. To advise on safety aspects to the concerned departments and implementing &

ensuring safe working procedures as per the site safety manual. Ensure and document Company’s compliance with mandatory HSE requirements and

bring to managements attention areas of deficiency. Conducting tool box talks, safety inductions, trainings and to review on Method

statements, Safe work plan &Rescue plan Promote safe working environment among all site personnel and to carry out Training,

Meetings and Presentations regarding site HSE Regulations to the staff To evaluate the effectiveness of the safety systems implemented on site Maintaining the required level of Communication, Co-operation, and Co-ordination for

the competent HSE maneuverings combined with the Project management. Surveillance of Health and hygiene& to carry out environmental inspections and report

on environmental aspects& impacts To record & review on environmental aspect& impact assessments and update if

necessary To design environmental plans & procedures to achieve a environment protected

scenario and to advise on environmental aspects Identify and prioritize significant aspects and impacts & to design and implement a

corrective action system To document EM system, be a part of environmental audits and to conduct

management review Design and implement an internal EHS MS review program and to train employees as

per system

WORK HISTORY DATE TITLE COMPANY COUNTRY 2006-2008 SHE Officer NBTC Kuwait 2006 Fire Engineering Tutor NIFE India 2003-2006 Fire Safety Officer Eversafe Protection India

EMMANUEL S. FERNANDEZ Position: EHS Officer Since: 2009

EDUCATION:

Diploma in Fire & safety Management Registered Safety Advisor at JAFZA OSHA Construction Training and Safety Management Bachelor of Science-Mathematics Graduate Computer Savvy

. HIGHLIGHTS:

Advice the management on measures in the interests of the Safety and Health of the employees.

Control and implementation of Company’s HSE policies plan and programmes. Conducts HSE Audits, HSE Inspection & HSE Workshops. Organize Safety Training programme, Safety campaigns, Competitions, Contests and

Tool box talks Follow necessary Safety measures to prevent accident/ incident, plant and property

damage Follow the permit to work system, Lock out and Tag out System Active participation in Risk assessment, JSA, and Risk reduction measures Implementing the Safety precautions during Hydro testing. Pneumatic testing

radiography and other NDT Testing Inspection of Electrical equipments, Distribution boards/Substations and the Cables

Management Hot work Certifications of oil tankers, pipelines, confined spaces& all other hot work

areas Inspection of Cranes, Hoists, Elevators, Derricks, Dozers, Excavators, forklifters and

Conveyors Supervision of lifting and rigging operations Co coordinating and assisting in Emergency operations Checking and Examining of all safety Equipments, tools and tackles plant and machinery

Etc

WORK HISTORY:


2006 - 2008 HSE Officer Dodsal-CCWP Qatar

2003- 2005 Safety officer GK Constructions India

2007 - 2009 QA/QC Material Inspector Foster Wheeler Arabia Ltd KSA

2006 - 2007 QA/QC Welding Supervisor Alstom Power Centrales KSA

2004 - 2006 QA/QC Engineer Larsen and Toubro Ltd India

ANISH CHACKO Position: HSE Officer Since: 2009

1 Internal AuditorsIntegrated Management System(ISO 9001, ISO 14001, OHSAS 18001) Mannavan A.V. Biswadeep Das

Manoj Vargese Roshan Madhu Binu Baby Onofre Camorongan

2 Safety Officers Vikrant R. Khadye Surendran K. Manjunath A. Emmanuel Fernandes Anish Chacko Pradeep Shantharam Vishnu Thokkana Veedu

3 QC Engineers Level Mannavan A.V. Radiography Interpretation II Ultrasonic Testing II Magnetic Particle Testing II Liquid Penetrant Testing II Certified Welding Inspector SCWI / AWS Lead Auditor – IRCA Certification in ISO 9000 Lead Auditor – IRCA Certification in OSHAS 18001

Gopalswamy K Radiographic Testing II Ultrasonic Testing II Magnetic Particle Testing II Liquid Penetrant Testing II Certified Welding Inspector CSWIP/ 3.1

Vinod M R Radiographic Testing II Ultrasonic Testing II Magnetic Particle Testing II Liquid Penetrant Testing II Certified Welding Inspector CSWIP/ 3.1

Prabu Chandrasekaran Radiographic Interpretation II Magnetic Particle Testing II Liquid Penetrant Testing II Certified Welding Inspector CSWIP/ 3.1 Certified Painting Inspector BGAS/GR3 Lead Auditor/Auditor – IRCA Certification in ISO 9001:2008

CERTIFICATION OF PERSONNEL

QC Engineers (Contd..) Anand K. P. Level Radiographic Testing II Ultrasonic Testing II Magnetic Particle Testing II

Liquid Penetrant Testing II Certified Welding Inspector CSWIP/ 3.1

Ranjith Paul Radiographic Testing II Ultrasonic Testing II Magnetic Particle Testing II Liquid Penetrant Testing II

Nidhin Devasia Radiographic Testing II Ultrasonic Testing II Magnetic Particle Testing II Liquid Penetrant Testing II

Karthikeyan R. Radiographic Testing II Ultrasonic Testing II Magnetic Particle Testing II Liquid Penetrant Testing II

John Mathew Certified Painting Inspector BGAS/GR2

4 Safety CertificationsVikrant R. Khadye NEBOSH IGC (UK) IOSH Managing Safely OHSAS 18001 LA Course HAZOP for Team Leader Diploma in Industrial Safety. OSHA - Construction Health & Safety (US)

Surendran K. IOSH-Intl.Cert

Emmanuel Fernandes NEBOSH IGC (UK) B. Sc Enviornment Engineering (US) Diploma in Safety Engineering


5 Fire Fighters 8 Scaffolders Sanojwalson Vijay Kumar Chittimuri Mustafa Muhammed Kutty Arif Muhammed Hanif Mantu Kumar Dharma Almel Srinivas Pasini Fakir Neelapu

Vinay Kumar Mishra Nageswar Rao Bondada Pitamber Chinta Balaraju Dungu Rama Rao Godigula Srinivas Chinta Balaraju Mohammed Tippu Sathya Antony Rajan Ales Miah Soranjan Dutta Sunil Kasem Miah Satheesan Paten Zaviyar Soosai Sachindra Bera Durga Shankar Prabir Kumar Maji Muhammed Kasim Ali Raj Kapil Prasad Ashutosh Kumar Yadav Niraj Kumar Hasan Muhammed Idris Mohd. Tajuddin Sentu Subhash Ramesh Kumar Ponnulal Yadav Brijesh Kumar Pal Singh Shinhasan Prasad Hasan Muhammed Idris Deepu Balchandran Upendra Singh Esak Pucha Dijoy George Kasim Ali Mohd Mojibor Rahman Ali Hossain S Rahman Satheesh Chand Md. Majadul Islam Vasudevu Rao Ramu Chidippli Pappachan Rejikutty Abdur Razak Raju Singh Gurunatha Reddy Meshack Devanbu Shipon Babu Chanzeb Mazat Rajeshwer Kunta Dalwinder Singh

Md. Bishu Dundu6 Basic First Aid Indrajeet Vidyarthi

Mathai Shiji Chengotai Dharmajeet Singh Marimuthu Elumalai Nagendra Chauhan Mathew Anto Md Jamir Ali Padmanabhan Pillai Prakash Shailesh Lakshman Ranjith Pachikaran Kunhiraman Azmal Md Ishaq Sam Poulose Md Jalil Md Abul Hasem Shibu Lekshmanan Shri Ram Pat Chauhan Simhachalam Durru Ramshankar Bishun Yadav Ajai Kumar Singh Suthari Mallanna Kazi Mohammad Saiduzzaman Bhagwan Prasad

Ashutosh Kumar Anirudh Singh.7 Operator-Competency Certificate Ramshankar Bishun Yadav

Jenson Anthony Suthari Mallanna Helaluddin


9 Banksman / Rigger Certificate Welders - 6G - SMAW (Contd..) Thomas K. Varghese Mantu Kumar Ramanand.G Gireesh Gomathy Kewal Dharam Singh Manoj D' Souza Chidipilli Ramu Vasudevu Rao

Ramarao R. K. Ali Ibrahim Madhavarao G Md. Tutul Islam Prajapathi K. M. Sajib Miah Gorakala Dandasi Abu Sayed Anga Harinarayana-P Monirul Islam Battini K Rao Rajalu K T Reddy Tulsayya Neeladri Reddy Bora Prakash Kiran Kesaba Kb Mallesham Rao Nuka Rao Bunga Rahim Uddin. K Raspal Singh Ruhul Bepari Gorakala Ramu Mohammed Rony Jaspal Singh Syamaguna Ligidu Perumallu Dharma Rao Saini Lashmi Naidu Dilli Rao Lokananandam.S Sijo Seemon Pucha Tirupathi Rao Sijo Paulose

Nageshwara Rao10 Welders - 6G - SMAW Yesupu Gorkala

Biplob Siraj Benny Joseph Partha Ray Jiku Miah Sree Swapan Nandi Foysal Molla Saiful Islam Golam Mustafa Md. Linton Ashraf Md. Abdul Miah Ibrahim Miah Selvadurai Sala Uddin Neelachalam Putcha (Chargehand) Ariful Islam Mathew Rejimoe (Chargehand) Farhadul Karim Mainuddin Rayni Alamin Abdul Maheh Yadav Masud Hossain Omprakash Avarachan Sabu (Charge Hand) Asokan Pillai Arji Dilleswara Rao Rama Rao Chalapathi Rao Tohin Miah Joga Rao Kamarul Islam Landa Krishna Jasimuddin Dharma Rao Ziar Miah Venkatesu Reddy Zia Ur Rahman Govinda Rao Duryodhana Shyam Sunder Tirupathy Rao Pappachan Rejkutty Santhosh Mathew Musafir Singh


11 Welders - TIG/SMAW 12 Power Tools Training Cert. Om Prakash Meshack Devanbu Munna Ram Mathew Rejimone Umesh Kumar Thankappan Rajesh Udistara Rao Subash Chandra

Santosh Kumar Indreajeet Kumar Dijoy George Ganga Sagar Subramanian Gorli Eswara Rao K Raraju Patel Kantilal Balubhai V Sathya Narayana Madhavarao Gorakala Konda Babu Shambu Bala Ganesan Prajapathi Krishna Murari Mathew Rejimone (Chargehand) Sanoj Valsan Chandroth Neela Chalam (Chargehand) Siddiqui Khurshed Selvadurai Vijayakumar Chittimuri Sunil Kumar Sau Mainuddin Rayni Mahesh Yadav Kazi Mohammad Saiduzzaman Rajesh Thangappan (Chargehand) Fernandes Edward Avil Debshankar Prativa George Kutty Koonathan Appala Raju Pappachan Rejikutty Ranjith Mannarakkal Dinesh Yadav Dharma Rao Ali Ibrahim Miyan Tulsayya Sajib Miah Ali Syamaguna Prakash Kiran Menon Miznur Rehman Durgiah Marathi Mallesham Dinesh Yadav Dayashankar Yadav Abu Kalam Mantu Kumar Sijo Seemon Mohd. Rony Tutul Islam Asokan Pillai Masud Hossain Faradul Karim Benny Joseph


PLANT, EQUIPMENT AND WORKSHOP

Albanna Engineering (ABE) fabrication yard is located in the Al Quoz

industrial area, within easy reach of Jebel Ali and Dubai Ports, and of the

main road network (E311 Emirates Road, Dubai / Abu Dhabi Highway).

The facilities include 2,500 m2 of covered hangars equipped with overhead

cranes and steel fabrication machinery. A separate workshop is dedicated to

painting activities. There is a hard stand of 8,000 m2 for outdoor assemblies,

for storage of raw materials and for finished products.

Typical production is made of structural steel, pipe racks, pipe spools, tanks.

NDT testing is conducted at the premises. Manufacturing is done on the

basis of PQR’s tested in independent laboratories. The production range

includes stainless steel, carbon steel, super duplex etc.

LIST OF PLANT & EQUIPMENT

SR.NO.1 STEEL FABRICATION

1.1 FORMING / SHAPING MACHINERYROLLING MACHINE 16MM X 2M, CROMPTON U.K. 1ROLLING MACHINE 35MM X 2.5M, HIMALAYA, INDIA 1HYDRAULIC PRESS 100 TON, ASINCRONO, SPAIN 1HYDRAULIC PUNCHING MACHINE 24 MM DIA, GEKA, JAPAN 1TREADING MACHINE (UP TO 4 INCH) RIGID, U.S.A. 2IRON WORKS TO SHEAR ANGLES, ROD, ETC., GEKA, SPAIN 1GRINDING MACHINE 4 INCH, ATLAS COPCO / AEG GERMANY / DEWALT 80GRINDING MACHINE 7 INCH, ATLAS COPCO / AEG GERMANY / DEWALT 55GRINDING MACHINE 9 INCH, ATLAS COPCO / AEG GERMANY / DEWALT 45BENCH GRINDER, HANNING ELECTROWORK, GERMANY 1BEVELLING MACHINE 24", KOIKE JAPAN 13JACK 5 TON (MECHANICAL), MASADA, JAPAN 11JACK 8 TON (HYDRAULIC), MASADA, JAPAN 1JACK 50 TON (HYDRAULIC), MASADA, JAPAN 2TANK ERECTION JACKS 80PIPE ROLLING MACHINE 1HYDRAULIC PIPE BENDING MACHNIE (Mannual ) 1/2" - 2" - MEGA SPAIN 1PIPE BENDING MACHINE 3/8" - 4" - POWER JACK ITALY 1

1.2 DRILLING EQUIPMENTRADIAL DRILLING MACHINE 80MM DIA, ASQUITH, U.K. 1DRILLING MACHINE WITH MAGNETIC STAND ATLAS COPCO/Rotabroach/BDS 10PORTABLE DRILLING MACHINE 13 MM DIA ATLAS COPCO, GERMANY 25HEAVY DUTY 4 SPEED DRILL 32 MM DIA, ATLAS COPCO, GERMANY 1MAGNETIC DRILLING MACHINE 2

1.3 CUTTING EQUIPMENTPLASMA CUTTING MACHINE 19mm MILLER, U.S.A. 1PLASMA CUTTING MACHINE 35mm MILLER, U.S.A. 1BAND SAW - Semi Automatic - Up to 600mm 1PUG CUTTING MACHINE, KOIKE JAPAN 4GAS CUTTING SET, VICTOR, U.S.A. 58JIG SAW MACHINE, 5PIPE CUTTER UP TO 2" DIA, RIGID, U.S.A. 2PIPE CUTTER 2" TO 4" DIA, RIGID, U.S.A. 4PIPE CUTTER 4" TO 6" DIA, RIGID, U.S.A. 2PIPE CUTTER 6" TO 8" DIA, RIGID, U.S.A. 1PIPE CUTTER 8" TO 12" DIA, RIGID, U.S.A. 1COLD CUTTING MACHINE - MANNUAL -RIGID / REED -USA 7PNEUMATIC COLD CUTTING MACHINE - CAPACITY 10-12" ( WACH ) 1

1.4 WELDING EQUIPMENTDIESEL WELDING GENERATOR MILLER/LINCOLN 400/500 AMPS. 29DIESEL WELDING GENERATOR ESSAB 500 AMPS 4WELDING RECTIFIER 400/600 AMPS MILLER/LINCOLN 85WELDING RECTIFIER 300 AMPS 1phs. MILLER, U.S.A. 1WELDING SET, MILLER, 600 AMPS. TIG 3MIG WELDING RECTIFIER ESAB 2PORTABLE WELDING RECTIFIER - Miller 10STT WELDING RECTIFIER - LINCOLN 1ELECTRODE BAKING OVEN, MITRE, UK 7ELECTRODE BAKING OVEN, PORTABLE, MITRE, UK 85HDPE - PIPE JOINING MACHINE 1" TO 6" RITMO - ITALY 1HDPE - PIPE JOINING MACHINE 8" TO 14" RITMO - ITALY 1HDPE - PIPE JOINING MACHINE 14" TO 24" RITMO - ITALY 1HDPE EXTRUTION WELDING MACHINE, RITMO - ITALY 1SAW AUTOMATIC WELDING MACHINE - LINCOLN 1

DESCRIPTION QTY

SR.NO.1.5 TESTING EQUIPMENT

HYGROMETER ELCOMETER, U.K. 4DFT - FILM THICKNESS GAUGE - ELCOMETER / Defelsco 9HARDNESS TESTER, POLDI, U.K. 1DIGITAL CLAMP METER, KYORITSU, JAPAN 2HOLIDAY DETECTOR CALTEC 1HOLIDAY DETECTOR ELCOMETRE 2HOLIDAY DETECTOR SPY 1HYDRO TESTING HANDPUMP, HIFORCE 13HYDRO TESTING PNEUMATIC, HIFORCE/HYDRATRON 4HYDRO TESTING DIESEL, 1HYDRO TESTING PETROL, 5.5 HYDRATRON UK 1PRESSURE PUMP 190 BAR / 8.5 HP 2TOTAL STATION 1AUTO LEVEL 3THEODOLITE, ZEISS, GERMANY 1PRESSURE GAUGE (0-25 BAR), WIKA, GERMANY 10PRESSURE GAUGE (0-40 BAR), WIKA, GERMANY 13PRESSURE GAUGE (0-100 BAR), WIKA, GERMANY 6PRESSURE TEMP.CHART RECORDER, BOURDEN, U.K. 6GAS DETECTOR (H2S, CO2,O22 & LEL),GASALERT 17ELECTRONIC KETTERING MACHNINE ( Engraver ) 1DIGITAL DEW POINT CALCULATOR 1RCD TESTER - Megger 1

1.6 PROTECTIVE COATING EQUIPMENTELGE FIXED COMPRESSOR 750 CFM 1AIR COMPRESSOR 825 CFM, INGERSOLRAND 3AIR COMPRESSOR 375 CFM , INGERSOLRAND 1AIR COMPRESSOR 750 CFM - COMPARE 1BLASTING ROOM WITH DUST EXTRACTION & STEEL GRIT RECYCLING 1BLASTING POT, BLASTLINE, U.K. 10AIRLESS SPRAY PAINTING SET, GRACO, BELGIUM 7AFTER AIR COOLER 2PAINTING AIR COMPRESSOR 1

1.7 HANDLING & ERECTION EQUIPMENTAUTO GRU - 1 TON TRUCK MOUNTED CRANE 1TRUCK MOUNTED CRANE 20 TON, KATO, JAPAN 1E.O.T. CRANE 10 TON, ELMECH, INDIA 1E.O.T. CRANE 5 TON, ELMECH, INDIA 1PALLET TRUCK 2 TON, LIFTEC, ITALY 1430-TON KATO CRANE 1TADANO 65 TON MOBILE CRANE 1KATO 25 TON MOBILE CRANE 1SCISSOR LIFT 1SCAFFOLDING (SET), EUROTOWER, U.K. 1LIFTING BEAM 10 TON, ALBANNA, U.A.E. 6HEAVY DUTY IMPACT WRENCH, HIFORCE, U.K. PNEUMATIC 5ELECTRICAL IMPACT WRENCH, MAKITA, JAPAN 1TIRFOR 1.6.TON, SUPER TIL, JAPAN 13TIRFOR 3.2 TON, SUPER TIL, JAPAN 8

DESCRIPTION QTY

SR.NO.2 CIVIL CONSTRUCTION EQUIPMENT

PETROL ENGINE OPERATED VIBRATOR, ROBIN, JAPAN 11PLATE COMPACTOR 5JCB SHOVEL / BACKHOE 3BOBCAT 1SCAFFOLDING SYTEM, KHK, RMD LOTSET OF FORMWORK FOR WALLS, COLUMNS 2MATERIAL HOIST 2SMALL TOOLS LOTWOOD WORKING MACHINERY LOTASPHALT / CONCRETE CUTTER 02RE BAR CUTTERS 3INTERLOCK CUTTERS 3POWER FLOAT 2POWER SCREED 2POLE SCABBLER - TAMPER UK 1TABLE WOOD CUTTER, HITACHI, JAPAN 3

3 POWER GENERATORSDIESEL POWER GENERATOR 200 KVA - GREAVES / PHOENIX 2DIESEL POWER GENERATOR 150 KVA FG WILSON, UK / PERKINS 4DIESEL POWER GENERATOR 135 KVA FG WILSON, UK 2DIESEL POWER GENERATOR 63 KVA 2DIESEL POWER GENERATOR 5 KW, VANMAR 2TOWER LIGHT 2

4 TRANSPORT (LIFTING EQUIPMENT LISTED UNDER STEELFABRICATION)PICK-UP 3 TON CAPACITY, MITSUBISHI CANTER 6PICK-UP 1 TON CAPACITY, NISSAN 10PICK-UP 7 TON CAPACITY, MITSUBISHI CANTER 1BUS 62 SEATER, LEYLAND 4MINI BUS 15 SEATER, NISSAN URVAN 44 WHEEL DRIVE, TOYOTA LAND CRUISER, MITSUBISHI, NISSAN PATH FINDER, PORSCHE 9CAR NISSAN SUNNY / LANCER / TIDA / EPICA / GALLANT 15SKID STEER LOADER / EXCAVATOR, MUSTANG 940 E 1FORKLIFT 5 TON - KOMATSU 11000 USG - DIESEL TANKER 140 TON TRAILOR - VOLVO 3

5 CYLINDER FILLING EQUIPMENTSDCP-FILLING MACHINE 1CO2-FILLING MACHINE 1CYLINDER HYDROTESTING MACHINE 1

DESCRIPTION QTY

ON-GOING PROJECTS

Sl. No. Project Client

Contract Value (AED)

1

Design & Engineering, Supply of materials, fabrication, construction, installation, testing and commissioning of Mechanical, Piping, Civil & Structural works for the Storage Terminal

Gulf Petrochem FZC

195,000,000.00

2

Supply, painting, 3LPE coating, fabrication, installation and testing of 16" SMLS Pipe (5.2 kms.) including civil works

EMAL 13,200,000.00

3

Supply, Fabrication, Painting, Erection, Testing of pipeline from Socar Aurora Terminal to POF Matrix Manifold & Matrix Manifold piping works

Socar Aurora 16,500,000.00

4 Supply & Installation of Gate Valves & Butterfly Valves including modification of Tank Header and recirculation lines

VTTI Fujairah Terminal

9,000,000.00

5 Expansion of Petroleum Products, Storage and Distribution Terminal at Fujairah

EMARAT 105,000,000.00

6

Design, Stress Analysis, preparation of fabrication drawings, supply, fabrication, erection & testing of pipeline in trestle and installation of loading arm and related E & I works

Vopak, Fujairah 38,600,000.00

7

Design, supply, installation, testing & commissioning of pipe line including E&I Works

Port of Fujairah 22,020,000.00

8 Piping Works Star Energy 1,000,000.00

Major Projects Completed In The Last 5 Years

SL. NO. PROJECT CLIENT Contract Value

(AED) Execution

Period

1 Mechanical Works for Multiple Projects

EPCL 10,500,000.00 2012

2 Pipe Fabrication and Erection Works

Dry Docks 1,600,000.00 2011

3

Fabrication, Painting, Erection, Testing & Pigging of Pipeline and associated civil & structural works\

DUGAS 1,200,000.00 2011

4 Phase 6 Expansion Works – Stage 1

Star Energy Oil Tanking

29,360,000.00 2011

5

Supply, Fabrication & Erection of pipe & fittings for ULG & Naphtha interconnecting piping and associated civil works

EPPCO International

587,200.00 2011

6

Cast house 1 - New Substation Building, Transformer Bay & Extension of roof structure including associated MEP works

Dubai Aluminium (DUBAL)

3,670,000.00 2011

7 Piping, Fabrication & Erection Work – TI Aquila

Dubai Drydocks

1,284,500.00

2011

8 Skid Fabrication Works Alderly FZE 8,495,600.00 2011

9

Design, Supply, Installation, Testing & Commissioning of Compressed Air Line & Dense Phase Pipe Line

Emirates Aluminium

(EMAL) 1,321,200.00 2011

10

Construction of new pot repair building including civil, structural, cladding & electrical works


3,670,000.00 2011

11 Supply, Fabrication & Installation of pipeline & associated Civil, E&I Works

FAL Energy Terminal

2,598,360.00 2010

12 Plant Wide Structural Access Platforms


2,385,500.00 2010

13 Design, Supply and Fabrication of Metering Skid Truck including E&I Works

Emerson Process

Management FZE

458,750.00 2010

SL. NO. PROJECT CLIENT Contract Value

(AED) Execution

Period

14

Plant Wide Underground Piping Works / STG & BOP Piping Work / BOP Large Box Piping Works

Emirates Aluminium

(EMAL) 184,000,000.00 2008 – 2010

15 Berth 9 Piping Works ENOC

Processing Company

8,991,500.00 2009

16 Piping Work – TI Asia Dubai Drydocks 5,505,000.00 2009

17 Unit 700 Revamping Project Fujairah Refinery

2,936,000.00 2009

18 Tank Bottom & Annular Plate Replacement Work

Star Energy Oil Tanking

2,596,341.50 2009

19 Alcan Degaser DUBAL 2,202,000.00 2007 – 2009

20 TTLR Augment Facility EIL 2,752,500.00 2008

21 Water Filling Station DUBAL 4,080,170.00 2008

22 Naptha Hydrotreater Reformer

EPCL 7,340,000.00 2007 – 2008

23

Tank Fabrication and Erection (11 nos)

HJATL 38,535,000.00 2006 – 2008

24 Tank farm Expansion

Star Energy

26,607,500.00 2006 – 2007

25 Cooling Water Circuit Upgrade

DUBAL

3,670,000.00 2006 – 2007

26 Fabrication of Evaporators

SIDEM / Belleli

5,505,000.00

2006 – 2007

27 Berth Piping

EMARAT

3,670,000.00 2006 – 2007

28

Diesel Fuel Pipeline at MARGHAM Est.

DUBAL 3,670,000.00 2006 – 2008

29 Furnace Fabrication and Erection

DUBAL 2,202,000.00 2008

COMPLETED PROJECTS

SL. NO. PROJECT CLIENT / MAIN

CONTRACTOR CONSULTANTS /

ARCHITECTS

EXECUTION

PERIOD

1 Gas Turbine Outage

DEWA

Siemens 2007

2

Construction of Gas Oil Distribution Facility at Mussafah

EMARAT

EMARAT

2004

3

VOPAK – Mini Finger Pier at Berth

TIDALMARINE

VOPAK

2004/2005

4 TTLR – Fire Protection

EPPCO

ENOC

2004/2005

5 HDPE Dosing Line at DUBAL

DUBAL

TEBODIN

2004

6

Pipe racks, Platforms and Miscellaneous for Tanksin Djibouti

Belleli

ENOC

2004/2005

7

Office & Fabrication Facilities at JAFZA

Lamprell Energy

Cansult

2002

8

Hazardous Chemical Warehouse Facility at Jebel Ali Phases I, II and II

Chemstore

ENOC

2005

9

Engineering, Procurement & Erection of AU/SRU Plant

Fujairah

Refinery Company Limited

Petrofac LLC

2003

10 Polyol Blending Project

Shell Chemicals

Tebodin

Middle East

2002/2003



ARCHITECTS

EXECUTION

PERIOD

11

Installation of Top Side Piping on Mystras-II Vessel (FPSO Conversion)

Dubai Dry Docks

Dubai Dry Docks

2004

12

GENOA – Mechanical Piping

EPPCO

ENOC

2000

13

Fire Protection Pipeworks & Vessel Dismantling

Emirates Gas

ENOC

2003

14

Permanent Oil Tanker Berth inside Port of Fujairah

Fujairah


FRCL

2003

15

Crude Loop Line, Barge, Filters & Pipelines

Fujairah


FRCL

2002

16 Bumper – Jebel Ali

EPPCO

WS Atkins

2001

17

Miscellaneous Steel Workers

Fujairah Refinery Company Limited

FRCL

2003

18

VOPAK ENOC Pipeline Connection


FRCL

2002

19 50 M Communication Tower

Zener

Bel-Yoahah

2004

20

Piperacks of Jet Fuel and Bitumen Lines to Fujairah Port Fence


FRCL

2001



ARCHITECTS

EXECUTION

PERIOD

21 Platinum Project – Floating Dock

Dubai Port Authority

Dubai Port Authority

2002/2003

22

Additional Tankage at EPPCO Terminal

EPPCO

ENOC

2003

23

MEP Services

EPPCO Aviation

Fujairah

EPPCO

2001

24

Piping Jobs in Terminal – 4 of Jebel Ali

EPPCO

EPPCO

2002

25 Bottom Plate Replacement

EPPCO

EPPCO

2003

26 Modification of 28” Ø pipe line

EPPCO

EPPCO

2002

27

Upgradation of Fire Fighting Facilities at Jebel Ali EMARAT Terminal

Corodex

Mott McDonald

2001

28 VOEL – Truck Loading Facility

VOPAK ENOC

Fujairah

ENOC

2001

29 Electrical Works for BMS Control

ENOC

Mott Mac Donald

2001

30

Electrical

Al Mershal Contracting

Al Maktab Al Asri

Engineering

2000

31 Helicopter & Washing Hangers

Trust Construction

– Abu Dhabi

Trust Constructions

2002

32

MEP Services

Al Mashariff Contracting

Al Emrah

Consulting Engg

2000



ARCHITECTS

EXECUTION

PERIOD

33 Electrical & Plumbing

Hamoon

Contracting

Al Mujassam Arch & Engg.

2000

34 MEP Services

Dolphin Steel Construction

Arenco

2000


Hamoon

Contracting

Dubarch Architec &

Engg.

2000

36

MEP Services

Pampa Industries

JAFZA

Apex International

2000

37 Offices & Warehouse Bldgs.

Pampa Industries

Apex International

2000

38

Office Buildings

Col. Ibrahim Ustadi,

JAFZA

MAS Consultant

1999

39

Office Buildings & Warehouses

Capsul Packing

Facility at JAFZA

MAS Consultant

1999

40

MEP Services

Mr. Abdul Noor

Kalantar

Archdome

1998

41

Plant Erection – Sulphuric Acid Plant

Falcon Chemicals

Al Wasl

Al Jadeed

2001

42

Electrical, Plumbing, Fire Fighting System

Al Masharif Contracting Co.

Design Modern Art

2000


Labour Camp

at Al Quoz

Bel-Yoahah

2000

44

MEP Services

Mr. Sulaiman Baqer Mohebi

Dubarch

1998



ARCHITECTS

EXECUTION

PERIOD

45

Electrical & Air Conditioning for Commercial Bldg.

Blue Star Limited

Fraser Nag Partnership

1999

46 Emirates Traning Center – Dubai

Emirates

Engineering

Halcrow – ENTC

1999

47

Electrical, Fire Alram & Fire Fighting System

Architectural Construction Team

Holford Associates

1999

48 Electrical Works for Warehouse

AB Bldg.

Contracting

Ziki Homsi

1999

49

Electrical Works for Labour Accom. Building

Mr Saif Salim Al Quoz

Architectural Corner

1999

50

MEP Services

Mr. Khamis

Mubarak

Circle Consult

1999

51 Offices and Warehouse Bldgs.

Abdul Razak

Mohiddin Trading

Abdulla Associates

1999

52 Warehouse Buildings

Union Paper Mills

Hadi

1998

53 Weigh Bridge, Workshop, Ramp

Scapmound International

Chawla Associates

1998

54

Sub-Station, Storage Bin, Batching Plant

Ready Mix Gulf

Al Gaith

1998

55

Office Buildings

Universal Health

Care

MAS Consultant

1998

56

Offices and Warehouse Bldgs.

Triburg

Investments JAFZA

New Arch

1998



ARCHITECTS

EXECUTION

PERIOD

57

MEP Services

Al Bakhit Gen.

Contracting

Al Maktab Al Asri

1998

58 MEP Services

Dolphin Steels

Abdulla

1998

ALBANNAPROJECT HIGHLIGHT

MECHANICAL WORKS AT TANKER BERTH -9 AT JABEL ALI FOR EPCL

Albanna Engineering was contractor for piping, structural, loading arm and pump erection works for the Berth 9 facilities for EPCL.

The scope includes installation, testing, painting and commissioning of Product pipe lines from Berth9 to Berth1 valve station with tie-ins to Berth3, and Berth7. Erection of 11 nos of loading arms and slop pumps with commissioning assistance also forms part of the scope along with Civil works for underground piping from Valve station to Berth 3 and structural supports and operating platforms

Albanna Engineering has successfully executed this 4 month project in time to the satisfaction of client.

Customer : ENOC Processing Company LLCConsultant : Tebodin Execution : 2009-2010Piping : 35,000” Ø, 30” pipe – 800M, 20”- 3KM, 16” – 2KM Painting : 12,000 m2

Wrapping : 1,600 m2

Structure : 150 Tons


HORIZON JABEL ALI TERMINAL II EXPANSION PROJECT

Albanna Engineering was EPC contractor for Tanks, piping , civil , Fire Fighting works for the Terminal II Expansion Project .

The scope include detailed design, engineering, procurement, construction, testing, painting and commissioning of 11 nos of Chemical Storage Tanks, complete SS piping for the new tank farm and to the Berth. Civil works includes construction of tank foundations, bund wall, tank farm area grading, pump foundations, substation guard house

Customer : Horizon Jabel Ali Terminals Consultant : ENOC Execution : 2007-2008Tank Capacity : 11,200 CuMPiping : 60,000 ” Ø Painting : 12,000m2

and road crossing works. The scope also includes fire fighting works for the tank and chemical shed.

Albanna Engineering has successfully executed this 13 month project in time to the satisfaction of of client.


STAR ENERGY PHASE 5 EXPANSION WORKS

Customer : STAR Energy Oil Tanking Consultant : Atkins Execution : 2007Piping : 20,000” Ø Painting : 5,500 m2

Internal Cement Lining : 1,750 m2

Albanna Engineering was the main contractor for mechanical, piping , civil , E&I works for the Terminal Expansion Project .

The scope included detailed engineering, procurement, construction, testing, painting and commissioning of complete product piping system for the new tank farm. Civil works includes construction of new bridge, extension of existing bund wall, tank farm area grading and foundations. The scope also includes fire fighting works and E & I works.

Albanna Engineering has successfully executed this 12 month project in time to the satisfaction of client.

ALBANNA

PROJECT HIGHLIGHT

DESIGN, FABRICATION AND INSTALLATION OF PRESSURE VESSEL FOR EMARAT (U Stamp)

The scope included detailed engineering, procurement, construction, testing, painting and commissioning of LPG pressure vessel. Also the scope included the related civil and structural jobs of the installation.

Customer : EMARAT Consultant : Albanna Engineering Execution : 2006 Pressure vessel : 3500 dia x 14000 long Coded : U-stamp

ALBANNA

PROJECT HIGHLIGHT

HAZARDOUS CHEMICALS WAREHOUSE FACILITY

This challenging project is interesting because of its specialized nature. The scope included the usual design and construction components, together with sophisticated fire fighting and environmentally safe drainage. Albanna Engineering completed the project in two phases, both executed in record time.

Customer : Chemstore FZCO (Jebel Ali). Consultant : ENOC Construction Period : 2005 Built up area : 9,000 m2

Tonnage : 650 tons

ALBANNA

PROJECT HIGHLIGHT

EMARAT GAS OIL STORAGE AND DISTRIBUTION FACILITY AT MUSSAFAH

Albanna Engineering was the main turnkey contractor for construction of the tank farm with 6,000 cu.m storage and distribution terminal project of EMARAT at Mussafah. The scope included detailed engineering, procurement, construction, testing, painting and commissioning of complete product piping system of the tankfarm, piping at tanker berths pipelines, fire protection system for the tankfarm and equipments. Also the scope included the related civil and structural jobs of the mechanical installation (equipment foundations, pipe trenches, firewater monitor towers, cross-over platforms, etc.)

Customer : EMARAT Consultant : Albanna Engineering Execution : 2004 Piping : 12,000” Ø Painting : 2,350 m2

Tank : 14m x 16m ( 2 nos)

ALBANNA

PROJECT HIGHLIGHT

FPSO-MYSTRAS – ON BOARD PIPING, STRUCTURAL WORKS

The timely conversion of MV MYSTRAS into a “Floating Production Storage & Offloading” facility was a stimulating challenge for all the participating companies. The scope of Albanna Engineering covered fabrication activities, painting, modules erection and hook ups, piping integration, hydraulic and pneumatic testing.

Customer : DUBAI DRYDOCKS Consultant : ABS Group Inc Execution : 2003

Piping : 26,000” Ø Painting : 3,000 m2 Technician Manhours : 120,000

ALBANNA

PROJECT HIGHLIGHT

SULPHUR RECOVERY UNIT

Albanna Engineering was the main contractor for this important turnkey project. The scope included design, manufacture, installation, commissioning of complete piping, structural, equipment, civil, electrical & instrumentation works. The construction period of 5 months, which was critical for refining operations, was successfully achieved through detailed planning, careful management and energetic execution. Albanna Engineering was the proud recipient of safety and early completion bonus for the job.

Customer : Fujairah Refinery Co. Ltd. Consultant : Petrofac Construction Period : 2002 Insulation work : 3000 m2

Piping : 20,000” Ø Tonnage : 3,000 Tons.

ALBANNA

PROJECT HIGHLIGHT POLYOLS BLENDING FACILITY

Customer : Shell Chemicals (Jebel Ali Terminal)

Based in Jebel Ali, this chemical plant consists in storage tanks, blenders, piping, pumps, loading arms and associated instrumentation. Albanna Engineering provided here the mechanical and instrumentation engineering work, including detailed design. The facility is highly automated and provides versatility of usage at minimum labour cost.

Consultant : Tebodin M. E. Ltd. Construction Period : 2002

Piping : 4,000” Ø Instrumentation : Flow meter, Motor Operating Valves,

Pressure Relief Valves, Pressure Safety, Level Transmitters, Pressure Transmitters

Instrumentation Make : Endress Hausser, SCADA & MODICON

ALBANNA

PROJECT HIGHLIGHT OFFICE & FABRICATION FACILITIES

This large facility was formally completed within 6 months of contract signature, having also successfully met two intermediate critical milestones during the execution period. The project included over 20,000 m2 of paved external areas, drainage, car parks to offer the end-user a modern self-contained and state-of-the-art manufacturing workshop combined with large and pleasing corporate offices.

End-user : Lamprell Energy FZE Customer : Thermo LLC and MMI Spectrum Int. (jointly) Consultant : Cansult Ltd. Construction Period : 2002 Structural Steel Tonnage : 900 mt Roof area : 11,000 m2

ALBANNA

PROJECT HIGHLIGHT PETROLEUM PRODUCTS STORAGE & DISTRIBUTION TERMINAL (TERMINAL – 4) OF EPPCO AT JAFZA

Albanna Engineering was the main contractor for mechanical & piping installations jobs of this 290,000 cumstorage and distribution terminal project of EPPCO (project GENOA) at Jebel Ali. The scope included detailed engineering, procurement, construction, testing, painting and commissioning of complete product piping system of the tankfarm, berth piperacks, piping at tanker berths pipelines, fire protection system for the tankfarm and equipments. Albanna Engineering has successfully executed this 7 month project in time to the satisfaction of client. Also the scope included the related civil and structural jobs of the mechanical installation (equipment foundations, pipe trenches, firewater monitor towers, cross-over platforms, etc.)

Customer : Emirates Petroleum Products Company (EPPCO)Consultant : ENOC (E&C Dept.) Execution : 2000 Piping : 50,000” Ø Painting : 7,350 m2

Coating : 1,600 m2 Internal Cement Lining : 1,900 m2 Cathodic Protection : Berth pipelines