Drawings and specifications herein are property of Advantech and shall not be reproduced or copied or used without prior written permission.

Page 1 of 13

POC-W211

Phase In New PCI-E x1 cards

ECOM Test Report

Initiated by Jada Wu Job Title Senior Engineer Release

Date 2012-9-10

Reviewed by Jessie Wu Job Title Engineer Revision V1.0

Approved by Cindy Liao Job Title Supervisor Release

Status Formal Release

Drawings and specifications herein are property of Advantech and shall not be reproduced or copied or used without prior written permission.

Page 2 of 13

RD Engineer Harry Wang PM Cynthia Tso

Request Date 2012/4/23 Released Date 2012/4/27

1. Product Configuration:

Model Name POC-W211

PCB Name PCM-8709

PCB Version A201-2

BIOS Version PCM-8709 V2.03 (01/05/2012) P/N: 1420029953

Test Operating System Windows XP Professional SP3

Others None

2. Test Environment/Peripheral:

CPU Intel® Core™ i7-2655LE @2.20Ghz

Memory Transcend 4GB DDR3 1066MHz SODIMM P/N: 93SD3-4G1066NN-TR

Storage Seagate ST9160314AS 160GB

PCI-E x1 card Uptech UTB-100 2-Ports 1394a PCI-E x1 card (P/N released)

Windows XPP Driver: 5.1.2535.0 (7/1/2001)

Uptech UTB310 2-Ports RS-232 PCI-E x1 card (P/N released)

Windows XPP Driver: 1.00.0000.14 (1/16/2008)

Test Equipment 1394 HDD, RS-232 loopback connector

Test Program Passmark Burn-In Test Pro V6, HP Fill Disk v3.01, Pcomm Pro v2.0, Serial

Device Server Configuration Utility v1.01

Drawings and specifications herein are property of Advantech and shall not be reproduced or copied or used without prior written permission.

Page 3 of 13

3. Test Purpose:

POC-W211 will phase in 2 PCI-E x1 cards, Uptech UTB-100 2-Ports 1394a PCI-E x1 card and Uptech

UTB310 2-Ports RS-232 PCI-E x1 card, in order to extend these two kinds of ports and functions

separately. The detail test methods and criteria are described as below.

4. Verification:

IEEE 1394

Basic Function Test

1. Plug the s1394 device in DUT.

2. Check the DUT can detect 1394 device.

3. Check the DUT has list 1394 device in device manager.

4. Use passmark burn in test program to test read/write for 1394 HDD.

Hot Plug Test

1. Plug the 1394 device in DUT.

2. Check the DUT can detect 1394 device.

3. Check the DUT has list 1394 device in device manager.

4. Hot plug the 1394 device for 5 cycles.

Passmark Burn-In test

1. Install Passmark Burn-In Test Pro V6

2. In main screen please click Configuration then choose Test preferences. There will pop up a dialog of

“BurnInTest Preferences”.

3. Select Disk and make sure all disk drives’ “Test this drive” has checked. Adjust the File size to 15 (%

of disk space).

4. In main screen please click Configuration then choose Test duty cycles. There will pop up a dialog of

“Test configuration and duty cycles”.

5. Select the Disk(s) tests to perform and the duty cycle set to Max load (100).

6. Fill the test period in “Auto Stop after 720 Minutes.

7. Close all power schemes and start test

File Copy Compare test (HP Fill Disk v3.01):

1. Install HP Fill Disk v3.01

2. Double click HP Fill Disk v3.0.exe

3. Choose file source and select all files.

4. Select which Destination will copy to.

5. Choose running mode in Loops or Duration.

Drawings and specifications herein are property of Advantech and shall not be reproduced or copied or used without prior written permission.

Page 4 of 13

6. Click File then save configuration.

7. Start testing by pressing Run Test button.

ACPI Test

1. Connect 1394 device to all available 1394 port.

2. Let DUT go to S1/S3/S4 mode separately.

3. Wake up the DUT and check the 1394 device can work properly.

4. Repeat the test at least 5 times.

Reboot Test

1. Connect 1394 device to all available 1394 port.

2. Reboot the DUT and check the 1394 device can work properly.

3. Repeat the test at least 5 times.

RS-232

Loopback test

1. Install Pcomm Pro v2.0 test program.

2. Plug the RS-232 loopback on each RS-232 port.

3. Perform the test program click StartProgramsPcomm Pro 2.0Terminal Emulator.

4. Open COM port test screen by clicking Port ManagerOpenCommunication Parameter.

5. Choose the port to test in COM Options. Other parameter with default setting.

6. Input some letters.

7. Press DTR button.

8. Press RTS button.

9. Connect the 15 meter cable with RS-232 loopback and repeat the steps 3 to 8.

Null Modem Cable test

1. Install Pcomm Pro v2.0 test program on two platforms. One is on PC1 and the other PC2.

2. Connect two platform’s RS-232 port through the Null Modem Cable.

3. Perform the test program on both platforms by click StartProgramsPcomm Pro 2.0Terminal

Emulator.

4. Open COM port test screen which under tested and connected on both platform by clicking Port

ManagerOpenCommunication Parameter.

5. Choose the port to test in COM Options. Other parameter with default setting.

6. Input some letters on PC1 then will be displayed on PC2. Input some letters on PC2 then will be

displayed on PC1.

7. Press DTR button on PC1 then DSR will be lighted on PC2.

8. Press RTS button on PC1 then CTS will be lighted on PC2.

Function test

1. Plug the RS-232 loopback on each RS-232 port.

Drawings and specifications herein are property of Advantech and shall not be reproduced or copied or used without prior written permission.

Page 5 of 13

2. Install Serial Device Server Configuration Utility v1.01 test program.

3. Perform the test program by clicking ToolsSimple Serial Test ToolSelect test COM portTest.

Throughput test

1. Install Pcomm Pro v2.0 test program.

2. Plug the Advantech RS-232 loopback in each RS-232 port.

3. Perform the test program on both platforms by click StartProgramsPcomm Pro 2.0

Performance Analyzer.

4. Add all RS-232 port for performance test by clicking SetupConfigPortsAdd COM portOK.

5. All RS-232 port set the same parameter to 115200 baud Rate, 8 Data Bits, None Parity, and 1 Stop

Bits.

6. Execute the performance burn in test by clicking RunStart.

ACPI Test

1. Let DUT enter into all supporting ACPI mode.

2. Wake up the DUT and check the RS-232 function.

3. Repeat the test for 5 times.

Reboot Test

1. Reboot the system.

2. Check the RS-232 function after booting to OS.

3. Repeat the test for 5 times.

5. Test Criteria:

IEEE 1394

1. Make sure 1394 device can be detected and work properly without any problem. It can’t have any

caution or question mark in device manager.

2. Verify the DUT can recognize the 1394 devices properly after hot-plugging. The hot-plug test must

pass at least 5 times.

3. Passmark burn in test can’t have any error or problem after finishing the test for 20 minutes.

4. File copy compare test for storage can’t have any error after finishing the test for 1 hour.

5. The function of 1394 device can work properly after resuming from ACPI mode.

6. The function of 1394 device can work properly after system reboot.

RS-232

1. Check typing some letters and it can be displayed what you typed on screen.

2. Check pressing DTR (Data Terminal Ready) button on test platform then DSR/RI/DCD will be

lighted.

Drawings and specifications herein are property of Advantech and shall not be reproduced or copied or used without prior written permission.

Page 6 of 13

3. Check pressing RTS (Request To Send) button on test platform then CTS (Clear To Send) will be

lighted.

4. Check above three items which connect to loopback with 15 meter cable.

5. Check typing some letters on DUT then will be displayed on PC1. On the contrary is the same.

6. Press DTR button on PC1 then DSR will be lighted on PC2. On the contrary is the same.

7. Press RTS button on PC1 then CTS will be lighted on PC2. On the contrary is the same.

8. Check all supported baud rate work properly without error or any problem.

9. Check the throughput of 115200 baud rate can meet the spec and burn-in more than 12hrs.

Drawings and specifications herein are property of Advantech and shall not be reproduced or copied or used without prior written permission.

Page 7 of 13

6. Test Result:

IEEE 1394

Note: All of the IEEE 1394 functions are on the premise that Windows XPP SP3 needs to install Windows

KB955356. It is to prevent the system stop responding while connected the external IEEE 1394 HDD.

Please refer to the hyperlink of KB955356: http://support.microsoft.com/kb/955356 and download the hot fix.

RS-232

Test Item Test Criteria Result Remark

Loopback test

(Pcomm Pro v2.0)

1. Check typing some letters and it can be displayed what you typed on

screen.

2. Check pressing DTR button on test platform then DSR/RI/DCD will

be lighted.

3. Check pressing RTS button on test platform then CTS will be lighted.

4. Check above three items which connect to loopback with 15 meter

cable.

Pass

Null Modem Cable

test

(Pcomm Pro v2.0)

1. Check typing some letters on DUT then will be displayed on PC1. On

the contrary is the same.

2. Press DTR button on PC1 then DSR will be lighted on PC2. On the

contrary is the same.

3. Press RTS button on PC1 then CTS will be lighted on PC2. On the

contrary is the same.

Pass

Test Item Description Result Remark

Basic function Check all 1394 devices can be detected and work properly without any

problem. Check the device driver and information in “Device

Management”. It cannot have any caution or other problem.

Pass Note

Hot plug Verify the 1394 device can work properly after hot plugging. Pass

Read/Write Check the SATA device can pass Passmark BurnIn test for 720 minutes

without error.

Pass

Check the SATA device can pass HP Fill Disk test for 12 hours without

error.

Pass

ACPI Check the 1394 device can work properly when resuming from ACPI

mode. The test must pass at least 5 times.

Pass

Reboot Check the 1394 device can work normally after system reboot. The test

must pass at least 5 cycles.

Pass

Drawings and specifications herein are property of Advantech and shall not be reproduced or copied or used without prior written permission.

Page 8 of 13

Function Test

(Serial Device Server

Configuration Utility

v1.01)

Check all supported baud rate work properly without error or any problem. Fail Issue: 39462

Note

Throughput Test

(Pcomm Pro v2.0)

/ Burn-In test

Check the throughput of 115200 baud rate can meet the spec. Pass

ACPI Check the RS-232 can function well when resuming from ACPI mode. The

test must pass at least 5 times.

Pass

Reboot Check the RS-232 can function well after system reboot. The test must

pass at least 5 cycles.

Pass

Note: Since Uptech UTB310 2-Ports RS-232 PCI-E x1 card with POC-W211 cannot support 921600 Baud

rate, so that RS-232 Function test will be failed. Uptech UTB310 2-Ports RS-232 PCI-E x1 card Baud rate

are generated by OXFORD OXPCIe952 PCI-e Bridge to Dual Serial & Parallel single chip, it can support

at least 3686400 Baud rate.

Drawings and specifications herein are property of Advantech and shall not be reproduced or copied or used without prior written permission.

Page 9 of 13

Appendix:

Product Picture:

POC-W211 Front View POC-W211 Rear View

POC-W211 Left View POC-W211 Right View

Drawings and specifications herein are property of Advantech and shall not be reproduced or copied or used without prior written permission.

Page 10 of 13

Uptech UTB-100 2-Ports 1394a PCI-E x1 card Uptech UTB310 2-Ports RS-232 PCI-E x1 card

Drawings and specifications herein are property of Advantech and shall not be reproduced or copied or used without prior written permission.

Page 11 of 13

Test Results:

IEEE 1394

HP Fill Disk copy & compare 12hrs

Passmark Burn-In 12hrs

Drawings and specifications herein are property of Advantech and shall not be reproduced or copied or used without prior written permission.

Page 12 of 13

RS-232

COM8 only supports Baud Rate from 75 to 460800 COM9 only supports Baud Rate from 75 to 460800

Serial Device Server Configuration Utility (COM8) Serial Device Server Configuration Utility (COM9)

Drawings and specifications herein are property of Advantech and shall not be reproduced or copied or used without prior written permission.

Page 13 of 13

Throughput Test and COM Burn-In