1
1) This device is designed for indoor use only. 2) Do not touch the device and cable with wet hands. 3) Do not use this device for other purpose. 4) Do not subject the product to physical shocks. 5) Do not disassemble the product or insert foreign object. Precautions for use EPR-101 Installation Guide Features 1) EPR-101 re-sends Data and PoE power received from PSE devices. 2) EPR-101 complies IEEE802.3af standard. 3) EPR-101 supports 10/100Mbps ethernet and extends Data & PoE distance as Max.130m. (Using 3 units as maximum, it is possible to extend the transmission distance additionally.) 4) EPR-101 supports PoE Standards and auto Detection for PoE and non-PoE Devices. 5) Plug & Play operation Overview EPR-101 is Ethernet & PoE repeater to overcom max 100m distance limitation without any configuration. Please read the installation guide carefully before product installation. Caution 1) Please install the device following the installation guide. 2) Do not touch the device and cable with wet hands. 3) Keep away from moisture and shock. 4) Do not install the device near any heat sources such as radiators, heat registers, stoves or other apparatus that produce heat. 5) If the device is defective or malfunctioning, please unplug the power immediately and contact to dealer or service senter. Precautions for Installation Installation Guide Please visit below website for more detailed information. Manufacturer : INTERCOAX CO.,LTD TEL : 031-365-3133 FAX : 031-365-3135 E-mail : [email protected] www.intercoax.com Specification Warranty EPR-101 is powered by PSE (Power Sourcing Equipment) such as PoE Switch or Injector. 2 Product Image 1 Connect UTP cable from PSE to "PoE IN" port. Data/PoE LED indicates working status 3 "PoE OUT" port is connect to PD(Powerd Device) such as IP camera. Data/PoE LED indicates working status. When connecting Non-PoE devices, please turn off the switch. 4 제품명 Cat5e DC 56V IEEE 802.3af 100Mbps 130m (Each repeater), 390m extension with 3 repeaters Green: Data, Yellow: PoE Working Temp.: 0 ~ 60°C / Storage Temp. : -20 ~ 85°C Max. 95% 118g 82x83x28(mm) EPR-101 RJ45 UTP Power Input PoE Standard Bandwidth Trans. Distance LED Indication Temperature / Humidity Weight Dimension Data & Power Input/Output PoE Injector PoE Switch PoE NVR PSE PoE Data PoE OFF ON PoE Data PoE IN PoE Data PoE OUT PoE Data PoE OFF ON This device has passed the quality control and product inspection. Please install and use according to the installation guide. The warranty period for this product is 24 months from the date of puchase. Any damages or breakage from user’s abuse, accident, modification or natural disasters will not be covered manufacturer’s warranty Applications

PoE INE-mail : [email protected] Specification Warranty EPR-101 is powered by PSE (Power Sourcing Equipment) such as PoE Switch or Injector. 2 1 Product Image Connect UTP cable from

  • Upload
    others

  • View
    1

  • Download
    0

Embed Size (px)

Citation preview

Page 1: PoE INE-mail : info@intercoax.com Specification Warranty EPR-101 is powered by PSE (Power Sourcing Equipment) such as PoE Switch or Injector. 2 1 Product Image Connect UTP cable from

1) This device is designed for indoor use only.

2) Do not touch the device and cable with wet hands.

3) Do not use this device for other purpose.

4) Do not subject the product to physical shocks.

5) Do not disassemble the product or insert foreign object.

Precautions for use

EPR-101 Installation Guide

Features

1) EPR-101 re-sends Data and PoE power received from PSE devices.

2) EPR-101 complies IEEE802.3af standard.

3) EPR-101 supports 10/100Mbps ethernet and extends Data & PoE distance as Max.130m.

(Using 3 units as maximum, it is possible to extend the transmission distance additionally.)

4) EPR-101 supports PoE Standards and auto Detection for PoE and non-PoE Devices.

5) Plug & Play operation

Overview

EPR-101 is Ethernet & PoE repeater to overcom max 100m distance limitation without

any configuration.

Please read the installation guide carefully before product installation.

Caution

1) Please install the device following the installation guide.

2) Do not touch the device and cable with wet hands.

3) Keep away from moisture and shock.

4) Do not install the device near any heat sources such as radiators, heat registers,

stoves or other apparatus that produce heat.

5) If the device is defective or malfunctioning, please unplug the power immediately and

contact to dealer or service senter.

Precautions for Installation

Installation Guide

Please visit below website for more detailed information.

Manufacturer : INTERCOAX CO.,LTD

TEL : 031-365-3133

FAX : 031-365-3135

E-mail : [email protected]

www.intercoax.com

Specification

Warranty

EPR-101 is powered by PSE (Power Sourcing Equipment) such as PoE Switch or

Injector.

2

Product Image1

Connect UTP cable from PSE to "PoE IN" port.

Data/PoE LED indicates working status

3

"PoE OUT" port is connect to PD(Powerd Device) such as IP camera.

Data/PoE LED indicates working status.

When connecting Non-PoE devices, please turn off the switch.

4

제품명

Cat5e

DC 56V

IEEE 802.3af

100Mbps

130m (Each repeater), 390m extension with 3 repeaters

Green: Data, Yellow: PoE

Working Temp.: 0 ~ 60°C / Storage Temp. : -20 ~ 85°C

Max. 95%

118g

82x83x28(mm)

EPR-101

RJ45

UTP

Power Input

PoE Standard

Bandwidth

Trans. Distance

LED Indication

Temperature /

Humidity

Weight

Dimension

Data & PowerInput/Output

PoE InjectorPoE Switch PoE NVR

PSE

PoEData

PoEOFF ON

PoEData

PoE IN

PoEData

PoE

OUTPoEData

PoEOFF ON

This device has passed the quality control and product inspection.

Please install and use according to the installation guide.

The warranty period for this product is 24 months from the date of puchase.

Any damages or breakage from user’s abuse, accident, modification

or natural disasters will not be covered manufacturer’s warranty

Applications