Embed Size (px)
Citation preview
6
Polyamide (PA)sieve fabric.
Food compatibility Bühler NOVAPRIME.
Bühler NOVAPRIME sieve fabric is made of polyamide
(PA) plastic yarn that contains only substances recognized
as safe for use with foodstuffs.
Compliance of material supplied.
Compliance of composition: the monofi lament yarn used
to manufacture the materials supplied is composed of
substances which are according to the FDA Code of
Federal Regulations (USA), Food and Drugs, Article 21,
Part 177 (indirect food additions: Polymers), Paragraph
177.1500.
Compliance of performance: compliance with Regulations
1935/2004/CE und EU 10/2011.
7
Product catalog.
All around the plansifter.
Material Tension before gluing[N/cm]
Polyester (PET) + 2-3
Metal mesh + 3-6
Polyamide (PA) sieve fabric mesh opening [µm]
Tension before gluing[N/cm]
Min. tension after 3 hours[N/cm]
> 630 15 (+/-1) 8
600 - 465 14 (+/-1) 7
450 - 315 13 (+/-1) 7
300 - 212 12 (+/-1) 6
200 - 112 11 (+/-1) 6
< 100 10 (+/-1) 5
NOVAPRIME.High quality sieve fabric.
With NOVAPRIME, Bühler now provides its own
sieve fabric, which is optimally adapted to the
specifi cations and performances of the various
plansifter types. Made of polyamide (PA) plastic
yarn, it provides the highest accuracy in terms
of size and uniformity of meshes.
Bühler NOVAPRIME is available on rolls of 30 m
length and as cut-to-size.
Recommended tension values.
Testing conditions:18-21°C / 50-60 % rel. humidity.
The maximum tension depends on the quality of the fabric as well as on the stability of the insertion frame.
Defi nitions for technical list.
ao Open area [%]
d Yarn diameter [µm]
w Mesh opening [µm]
A Length of cut-to-size [mm]
B Width of cut-to-size [mm]
8
Product catalog.
All around the plansifter.
Tissue number Mesh opening [µm] Mesh count [n/cm] Mesh count [n/inch] Open area [%] Yarn-d [µm] Roll width [mm] Ident number
NP-12GG-1800 1800 4.4 11 61 500 1150 UNR -58220-091
NP-12GG-1800 1800 4.4 11 61 500 1580 UNR -58220-093
NP-14GG-1600 1600 5.0 13 60 450 1150 UNR -58220-094
NP-14GG-1600 1600 5.0 13 60 450 1580 UNR -58220-096
NP-15GG-1400 1400 5.4 14 59 450 1150 UNR -58220-097
NP-15GG-1400 1400 5.4 14 59 450 1580 UNR -58220-099
NP-16GG-1320 1320 5.8 15 59 400 1150 UNR -58220-100
NP-16GG-1320 1320 5.8 15 59 400 1580 UNR -58220-102
NP-17GG-1250 1250 6.1 15 58 400 1150 UNR -58220-103
NP-17GG-1250 1250 6.1 15 58 400 1580 UNR -58220-105
NP-18GG-1180 1180 6.5 17 59 350 1150 UNR -58220-106
NP-18GG-1180 1180 6.5 17 59 350 1580 UNR -58220-108
NP-19GG-1120 1120 6.7 6.7 58 350 1150 UNR -58220-109
NP-19GG-1120 1120 6.7 6.7 58 350 1580 UNR -58220-111
NP-20GG-1000 1000 7.5 19 57 320 1150 UNR -58220-112
NP-20GG-1000 1000 7.5 19 57 320 1580 UNR -58220-114
NP-22GG-950 950 8 20 57 300 1150 UNR -58220-115
NP-22GG-950 950 8 20 57 300 1580 UNR -58220-117
NP-23GG-900 900 8.3 21 56 300 1150 UNR -58220-118
NP-23GG-900 900 8.3 21 56 300 1580 UNR -58220-120
NP-24GG-850 850 8.7 22 53 300 1150 UNR -58220-121
NP-24GG-850 850 8.7 22 53 300 1580 UNR -58220-123
NP-26GG-800 800 9.4 24 53 280 1150 UNR -58220-124
NP-26GG-800 800 9.4 24 53 280 1580 UNR -58220-126
NP-27GG-750 750 9.7 25 52 280 1150 UNR -58220-127
NP-27GG-750 750 9.7 25 52 280 1580 UNR -58220-129
NP-28GG-710 710 10.5 27 53 260 1150 UNR -58220-130
NP-28GG-710 710 10.5 27 53 260 1580 UNR -58220-132
NP-30GG-670 670 10.8 27 53 260 1150 UNR -58220-133
NP-30GG-670 670 10.8 27 53 260 1580 UNR -58220-135
NP-31GG-630 630 11.5 29 53 240 1150 UNR -58220-136
NP-31GG-630 630 11.5 29 53 240 1580 UNR -58220-138
NP-32GG-600 600 11.9 30 51 240 1150 UNR -58220-139
NP-32GG-600 600 11.9 30 51 240 1580 UNR -58220-141
NP-34GG-560 560 12.3 31 49 240 1150 UNR -58220-142
NP-34GG-560 560 12.3 31 49 240 1580 UNR -58220-144
Rolls.NOVAPRIME NP-GG.
Roll length 30 m
Roll width
9
Product catalog.
All around the plansifter.
Roll length 30 m
Rolls.NOVAPRIME NP-GG.
Roll width
Tissue number Mesh opening [µm] Mesh count [n/cm] Mesh count [n/inch] Open area [%] Yarn-d [µm] Roll width [mm] Ident number
NP-36GG-530 530 13.3 34 50 220 1150 UNR -58220-145
NP-36GG-530 530 13.3 34 50 220 1580 UNR -58220-147
NP-38GG-500 500 13.7 35 47 220 1150 UNR -58220-148
NP-38GG-500 500 13.7 35 47 220 1580 UNR -58220-150
NP-40GG-475 475 15 38 48 200 1150 UNR -58220-151
NP-40GG-475 475 15 38 48 200 1580 UNR -58220-153
NP-42GG-450 450 15.4 39 48 200 1150 UNR -58220-154
NP-42GG-450 450 15.4 39 48 200 1580 UNR -58220-156
NP-44GG-425 425 16 41 46 200 1150 UNR -58220-157
NP-44GG-425 425 16 41 46 200 1580 UNR -58220-159
NP-45GG-400 400 16.8 43 47 180 1150 UNR -58220-160
NP-45GG-400 400 16.8 43 47 180 1580 UNR -58220-162
NP-47GG-375 375 17.5 44 47 180 1150 UNR -58220-163
NP-47GG-375 375 17.5 44 47 180 1580 UNR -58220-165
NP-50GG-355 355 19.4 49 48 160 1150 UNR -58220-166
NP-50GG-355 355 19.4 49 48 160 1580 UNR -58220-168
NP-52GG-335 335 20.2 51 46 160 1150 UNR -58220-184
NP-52GG-335 335 20.2 51 46 160 1580 UNR -58220-186
NP-54GG-315 315 21 53 44 160 1150 UNR -58220-187
NP-54GG-315 315 21 53 44 160 1580 UNR -58220-189
NP-62GG-275 275 24.1 61 44 140 1150 UNR -58220-190
NP-62GG-275 275 24.1 61 44 140 1580 UNR -58220-192
NP-64GG-265 265 25 64 43 140 1150 UNR -58220-193
NP-64GG-265 265 25 64 43 140 1580 UNR -58220-195
NP-68GG-243 243 28 71 44 120 1150 UNR -58220-172
NP-68GG-243 243 28 71 44 120 1580 UNR -58220-174
NP-70GG-236 236 28 71 44 120 1580 UNR -58220-175
NP-70GG-236 236 28 71 44 120 1580 UNR -58220-177
NP-72GG-224 224 29 74 42 120 1150 UNR -58220-178
NP-72GG-224 224 29 74 42 120 1580 UNR -58220-180
NP-74GG-212 212 30 76 40 120 1150 UNR -58220-181
NP-74GG-212 212 30 76 40 120 1580 UNR -58220-183
10
Product catalog.
All around the plansifter.
Rolls.NOVAPRIME NP-MF.
Roll length 30 m
Roll width
Tissue number Mesh opening [µm] Mesh count [n/cm] Mesh count [n/inch] Open area [%] Yarn-d [µm] Roll width [mm] Ident number
NP-3MF-300 300 23.5 60 51 120 1150 UNR -58220-001
NP-3MF-300 300 23.5 60 51 120 1580 UNR -58220-003
NP-4MF-280 280 25 64 51 120 1150 UNR -58220-004
NP-4MF-280 280 25 64 51 120 1580 UNR -58220-006
NP-5MF-250 250 28.5 72 51 100 1150 UNR -58220-007
NP-5MF-250 250 28.5 72 51 100 1580 UNR -58220-009
NP-7MF-200 200 32.5 83 44 100 1150 UNR -58220-010
NP-7MF-200 200 32.5 83 44 100 1580 UNR -58220-012
NP-8MF-180 180 36.5 93 43 90 1150 UNR -58220-013
NP-8MF-180 180 36.5 93 43 90 1580 UNR -58220-015
NP-8 ½ MF-160 160 40 102 42 90 1150 UNR -58220-016
NP-8 ½ MF-160 160 40 102 42 90 1580 UNR -58220-018
NP-9MF-150 150 43 109 42 80 1150 UNR -58220-019
NP-9MF-150 150 43 109 42 80 1580 UNR -58220-021
NP-9 ½ MF-140 140 45 114 41 80 1150 UNR -58220-024
NP-9 ½ MF-140 140 45 114 41 80 1580 UNR -58220-024
NP-10MF-132 132 49 124 43 70 1150 UNR -58220-025
NP-10MF-132 132 49 124 43 70 1580 UNR -58220-027
NP-10 ½ MF-125 125 51 130 41 70 1150 UNR -58220-028
NP-10 ½ MF-125 125 51 130 41 70 1580 UNR -58220-030
NP-11MF-118 118 53 135 41 70 1150 UNR -58220-031
NP-11MF-118 118 53 135 41 70 1580 UNR -58220-033
NP-12MF-112 112 57.5 146 42 60 1150 UNR -58220-034
NP-12MF-112 112 57.5 146 42 60 1580 UNR -58220-036
NP-13MF-100 100 60 152 39 60 1150 UNR -58220-037
NP-13MF-100 100 60 152 39 60 1580 UNR -58220-039
11
Product catalog.
All around the plansifter.
Rolls.NOVAPRIME NP-XXX.
Roll length 30 m
Roll width
Tissue number Mesh opening [µm] Mesh count [n/cm] Mesh count [n/inch] Open area [%] Yarn-d [µm] Roll width [mm] Ident number
NP-3XXX-300 1800 21.7 55 61 500 1150 UNR -58220-091
NP-3XXX-300 1800 21.7 55 61 500 1580 UNR -58220-093
NP-4XXX-280 1600 23.8 60 60 450 1150 UNR -58220-094
NP-4XXX-280 1600 23.8 60 60 450 1580 UNR -58220-096
NP-5XXX-250 1400 26.5 67 59 450 1150 UNR -58220-097
NP-5XXX-250 1400 26.5 67 59 450 1580 UNR -58220-099
NP-6XXX-212 1320 30 76 59 400 1150 UNR -58220-100
NP-6XXX-212 1320 30 76 59 400 1580 UNR -58220-102
NP-7XXX-200 1250 30 76 58 400 1150 UNR -58220-103
NP-7XXX-200 1250 30 76 58 400 1580 UNR -58220-105
NP-8XXX-180 1180 36 91 59 350 1150 UNR -58220-106
NP-8XXX-180 1180 36 91 59 350 1580 UNR -58220-108
NP-8 ½ XXX-160 1120 37.5 95 58 350 1150 UNR -58220-109
NP-8 ½ XXX-160 1120 37.5 95 58 350 1580 UNR -58220-111
NP-9XXX-150 1000 41 104 57 320 1150 UNR -58220-112
NP-9XXX-150 1000 41 104 57 320 1580 UNR -58220-114
NP-9 ½ XXX-140 950 44 112 57 300 1150 UNR -58220-115
NP-9 ½ XXX-140 950 44 112 57 300 1580 UNR -58220-117
NP-10XXX-132 900 45 114 56 300 1150 UNR -58220-118
NP-10XXX-132 900 45 114 56 300 1580 UNR -58220-120
NP-10 ½ XXX-125 850 48.8 124 53 300 1150 UNR -58220-121
NP-10 ½ XXX-125 850 48.8 124 53 300 1580 UNR -58220-123
NP-11XXX-118 800 49 124 53 280 1150 UNR -58220-124
NP-11XXX-118 800 49 124 53 280 1580 UNR -58220-126
NP-12XXX-112 750 55 140 52 280 1150 UNR -58220-127
NP-12XXX-112 750 55 140 52 280 1580 UNR -58220-129
NP-13XXX-100 710 57 145 53 260 1150 UNR -58220-130
NP-13XXX-100 710 57 145 53 260 1580 UNR -58220-132
NP-14XXX-95 670 60.6 154 53 260 1150 UNR -58220-133
NP-14XXX-95 670 60.6 154 53 260 1580 UNR -58220-135
NP-14 ½ XXX-90 630 67 170 53 240 1150 UNR -58220-136
NP-14 ½ XXX-90 630 67 170 53 240 1580 UNR -58220-138
NP-17XXX-80 600 68 173 51 240 1150 UNR -58220-139
NP-17XXX-80 600 68 173 51 240 1580 UNR -58220-141
12
Product catalog.
All around the plansifter.
Rolls.NOVAPRIME NP-Milling.
Roll length 30 m
Roll width
Tissue number Mesh opening [µm] Mesh count [n/cm] Mesh count [n/inch] Open area [%] Yarn-d [µm] Roll width [mm] Ident number
NP-14-95 95 61/69 155/175 38 50+2·43 1150 UNR -58210-217
NP-14-95 95 61/69 155/175 38 50+2·43 1580 UNR -58210-261
NP-14 ½ -90 90 62.5/71.5 159/182 37 50+2·43 1150 UNR -58210-218
NP-14 ½ -90 90 62.5/71.5 159/182 37 50+2·43 1580 UNR -58210-262
NP-15-85 85 65/76 165/193 34 50+2·43 1150 UNR -58210-219
NP-15-85 85 65/76 165/193 34 50+2·43 1580 UNR -58210-263
NP-17-80 80 68/81 173/206 35 50+2·43 1150 UNR -58210-220
NP-17-80 80 68/81 173/206 35 50+2·43 1580 UNR -58210-264
NP-20-75 75 70/84.7 178/215 34 50+2·43 1150 UNR -58210-221
NP-20-75 75 70/84.7 178/215 34 50+2·43 1580 UNR -58210-265
NP-21-71 71 74/87.7 188/223 33 50+2·39 1150 UNR -58210-222
NP-21-71 71 74/87.7 188/223 33 50+2·39 1580 UNR -58210-266
NP-25-63 63 78/94 198/239 30 43+2·43 1150 UNR -58210-223
NP-25-63 63 78/94 198/239 30 43+2·43 1580 UNR -58210-267
13
Product catalog.
All around the plansifter.
Cut-to-size.NOVAPRIME NP-GG.
Tissue number Mesh opening [µm] Mesh count [n/cm] Mesh count [n/inch] Open area [%] Yarn-d [µm] A [mm] B [mm] Ident number
NP-12GG-1800 1800 4.4 11 61 500 805 760 UXF -93228-031
NP-14GG-1600 1600 5 13 60 450 805 760 UXF -93228-032
NP-15GG-1400 1400 5.4 14 59 450 805 760 UXF -93228-033
NP-16GG-1320 1320 5.8 15 59 400 805 760 UXF -93228-034
NP-17GG-1250 1250 6.1 15 58 400 805 760 UXF -93228-035
NP-18GG-1180 1180 6.5 17 59 350 805 760 UXF -93228-036
NP-19GG-1120 1120 6.7 6.7 58 350 805 760 UXF -93228-037
NP-20GG-1000 1000 7.5 19 57 320 805 760 UXF -93228-038
NP-22GG-950 950 8 20 57 300 805 760 UXF -93228-039
NP-23GG-900 900 8.3 21 56 300 805 760 UXF -93228-040
NP-24GG-850 850 8.7 22 53 300 805 760 UXF -93228-041
NP-26GG-800 800 9.4 24 53 280 805 760 UXF -93228-042
NP-27GG-750 750 9.7 25 52 280 805 760 UXF -93228-043
NP-28GG-710 710 10.5 27 53 260 805 760 UXF -93228-044
NP-30GG-670 670 10.8 27 53 260 805 760 UXF -93228-045
NP-31GG-630 630 11.5 29 53 240 805 760 UXF -93228-046
NP-32GG-600 600 11.9 30 51 240 805 760 UXF -93228-047
NP-34GG-560 560 12.3 31 49 240 805 760 UXF -93228-048
NP-36GG-530 530 13.3 34 50 220 805 760 UXF -93228-049
NP-38GG-500 500 13.7 35 47 220 805 760 UXF -93228-050
NP-40GG-475 475 15 38 48 200 805 760 UXF -93228-051
NP-42GG-450 450 15.4 39 48 200 805 760 UXF -93228-052
NP-44GG-425 425 16 41 46 200 805 760 UXF -93228-053
NP-45GG-400 400 16.8 43 47 180 805 760 UXF -93228-054
NP-47GG-375 375 17.5 44 47 180 805 760 UXF -93228-055
NP-50GG-355 355 19.4 49 48 160 805 760 UXF -93228-056
NP-52GG-335 335 20.2 51 46 160 805 760 UXF -93228-061
NP-54GG-315 315 21 53 44 160 805 760 UXF -93228-062
NP-62GG-275 275 24.1 61 44 140 805 760 UXF -93228-063
NP-64GG-265 265 25 64 43 140 805 760 UXF -93228-064
NP-68GG-243 243 28 71 44 120 805 760 UXF -93228-058
NP-70GG-236 236 28 71 44 120 805 760 UXF -93228-059
NP-72GG-224 224 29 74 42 120 805 760 UXF -93228-060
NP-74GG-212 212 30 76 40 120 805 760 UXF -93228-065
14
Product catalog.
All around the plansifter.
Cut-to-size.NOVAPRIME NP-MF.
Tissue number Mesh opening [µm] Mesh count [n/cm] Mesh count [n/inch] Open area [%] Yarn-d [µm] A [mm] B [mm] Ident number
NP-3MF-300 300 23.5 23.5 51 120 805 760 UXF -93228-031
NP-4MF-280 280 25 25 51 120 805 760 UXF -93228-032
NP-5MF-250 250 28.5 28.5 51 100 805 760 UXF -93228-033
NP-7MF-200 200 32.5 32.5 44 100 805 760 UXF -93228-034
NP-8MF-180 180 36.5 36.5 43 90 805 760 UXF -93228-035
NP-8 ½ MF-160 160 40 40 42 90 805 760 UXF -93228-036
NP-9MF-150 150 43 43 42 80 805 760 UXF -93228-037
NP-9 ½ MF-140 140 45 45 41 80 805 760 UXF -93228-038
NP-10MF-132 132 49 49 43 70 805 760 UXF -93228-039
NP-10 ½ MF-125 125 51 51 41 70 805 760 UXF -93228-040
NP-11MF-118 118 53 53 41 70 805 760 UXF -93228-041
NP-12MF-112 112 57.5 57.5 42 60 805 760 UXF -93228-042
NP-13MF-100 100 60 60 39 60 805 760 UXF -93228-043
001
002
003
004
005
006
007
008
009
010
011
012
013
this page in correction process
15
Product catalog.
All around the plansifter.
Cut-to-size.NOVAPRIME NP-XXX.
Tissue number Mesh opening [µm] Mesh count [n/cm] Mesh count [n/inch] Open area [%] Yarn-d [µm] A [mm] B [mm] Ident number
NP-3XXX-300 300 21.7 55 45 140 805 760 UXF -93228-014
NP-4XXX-280 280 23.8 60 45 140 805 760 UXF -93228-015
NP-5XXX-250 250 26.5 67 46 120 805 760 UXF -93228-016
NP-6XXX-212 212 30 76 40 120 805 760 UXF -93228-017
NP-7XXX-200 200 30 76 39 120 805 760 UXF -93228-018
NP-8XXX-180 180 36 91 39 100 805 760 UXF -93228-019
NP-8 ½ XXX-160 160 37.5 95 37 100 805 760 UXF -93228-020
NP-9XXX-150 150 41 104 38 90 805 760 UXF -93228-021
NP-9 ½ XXX-140 140 44 112 37 90 805 760 UXF -93228-022
NP-10XXX-132 132 45 114 40 80 805 760 UXF -93228-023
NP-10 ½ XXX-125 125 48.8 124 37 80 805 760 UXF -93228-024
NP-11XXX-118 118 49 124 34 80 805 760 UXF -93228-025
NP-12XXX-112 112 55 140 38 70 805 760 UXF -93228-026
NP-13XXX-100 100 57 145 32 70 805 760 UXF -93228-027
NP-14XXX-95 95 60.6 154 33 70 805 760 UXF -93228-028
NP-14 ½ XXX-90 90 67 170 36 60 805 760 UXF -93228-029
NP-17XXX-80 80 68 173 35 60 805 760 UXF -93228-030
16
Product catalog.
All around the plansifter.
Cut-to-size.NOVAPRIME NP-Milling.
Tissue number Mesh opening [µm] Mesh count [n/cm] Mesh count [n/inch] Open area [%] Yarn-d [µm] A [mm] B [mm] Ident number
NP-14-95 95 61/69 155/175 38 50+2·43 805 760 UXF -93228-083
NP-14 ½ -90 90 62.5/71.5 159/182 37 50+2·43 805 760 UXF -93228-084
NP-15-85 85 65/76 165/193 34 50+2·43 805 760 UXF -93228-085
NP-17-80 80 68/81 173/206 35 50+2·43 805 760 UXF -93228-086
NP-20-75 75 70/84.7 178/215 34 50+2·43 805 760 UXF -93228-087
NP-21-71 71 74/87.7 188/223 33 50+2·39 805 760 UXF -93228-088
NP-25-63 63 78/94 198/239 30 43+2·43 805 760 UXF -93228-089
17
18
Metalmesh.
Food compatibility metal mesh.
The metal mesh comply with the following
recommendations:
FDA Code of Federal Regulations (USA), Food and Drugs,
Article 21, Section 110.40, food for human consumption,
paragraph 110, subparagraph C: Machinery.
EU Recommendation of 13.2.2002 ‘Guidelines for metals
and alloys, which are intended to come into contact with
food’.
19
Product catalog.
All around the plansifter.
Cut-to-size.Stainless steel - magnetic.
Ident number Mesh opening [µm] Open area [%] Yarn-d [µm] A [mm] B [mm]
MPAK-14016-010 125 39 75 805 760
MPAK-11997-010 160 46 75 805 760
MPAK-11996-010 180 44 90 805 760
MPAK-12208-010 190 46 90 805 760
MPAK-11995-010 200 48 90 805 760
MPAK-12049-010 212 49 90 805 760
MPAK-11994-010 224 49 95 805 760
MPAK-11993-010 250 53 95 805 760
MPAK-11992-010 280 51 112 805 760
MPAK-12077-010 300 56 100 805 760
MPAK-11991-010 315 53 100 805 760
MPAK-11990-010 335 53 125 805 760
MPAK-11989-010 355 55 125 805 760
20
Product catalog.
All around the plansifter.
Ident number Mesh opening [µm] Open area [%] Yarn-d [µm] A [mm] B [mm]
MPAK-11988-010 375 53 140 805 760
MPAK-11987-010 400 58 125 805 760
MPAK-11986-010 425 60 125 805 760
MPAK-11985-010 450 61 125 805 760
MPAK-11984-010 500 57 160 805 760
MPAK-11983-010 530 59 160 805 760
MPAK-11982-010 560 60 160 805 760
MPAK-12078-010 600 62 160 805 760
MPAK-11981-010 630 64 160 805 760
MPAK-11980-010 670 62 180 805 760
MPAK-11979-010 710 64 180 805 760
MPAK-11978-010 750 65 180 805 760
MPAK-11977-010 800 58 250 805 760
MPAK-11976-010 850 60 250 805 760
MPAK-11975-010 900 61 250 805 760
MPAK-11974-010 950 64 250 805 760
MPAK-11973-010 1000 58 315 805 760
MPAK-11972-010 1120 61 315 805 760
MPAK-12079-010 1180 62 315 805 760
MPAK-11971-010 1250 57 400 805 760
MPAK-11970-010 1400 60 400 805 760
MPAK-11969-010 1600 58 500 805 760
MPAK-11968-010 1800 61 500 805 760
MPAK-11967-010 2000 61 560 805 760
MPAK-11966-010 2240 69 450 805 760
MPAK-11965-010 2500 69 500 805 760
MPAK-11964-010 2800 72 500 805 760
MPAK-11963-010 3150 64 800 805 760
MPAK-11962-010 3550 64 900 805 760
MPAK-11961-010 4000 64 1000 805 760
MPAK-11960-010 4500 67 1000 805 760
MPAK-11959-010 5000 64 1250 805 760
MPAK-11958-010 5600 67 1250 805 760
MPAK-11957-010 6300 70 1250 805 760
MPAK-11851-010 8000 69 1600 805 760
Cut-to-size.Stainless steel - magnetic.
21
Product catalog.
All around the plansifter.
Cut-to-size.Spring steel.
Ident number Mesh opening [µm] Open area [%] Yarn-d [µm] A [mm] B [mm]
MPAK-12026-010 224 41 125 805 760
MPAK-12025-010 250 44 125 805 760
MPAK-12024-010 280 48 125 805 760
MPAK-12023-010 300 50 125 805 760
MPAK-12022-010 315 51 125 805 760
MPAK-12021-010 335 53 125 805 760
MPAK-12020-010 355 55 125 805 760
MPAK-12019-010 400 58 125 805 760
MPAK-12018-010 425 60 125 805 760
MPAK-12017-010 450 61 125 805 760
MPAK-12016-010 500 57 160 805 760
MPAK-12015-010 530 59 160 805 760
MPAK-12014-010 560 60 160 805 760
MPAK-12013-010 600 62 160 805 760
MPAK-12012-010 630 64 160 805 760
MPAK-12011-010 670 59 200 805 760
MPAK-12010-010 710 62 190 805 760
MPAK-12009-010 750 62 200 805 760
MPAK-12008-010 800 65 190 805 760
MPAK-12007-010 850 66 200 805 760
MPAK-12027-010 900 61 250 805 760
MPAK-12028-010 950 68 200 805 760
MPAK-12006-010 1000 64 250 805 760
MPAK-12005-010 1120 67 250 805 760
MPAK-12004-010 1180 71 250 805 760
MPAK-12003-010 1250 67 280 805 760
MPAK-12002-010 1320 68 280 805 760
MPAK-12001-010 1400 67 315 805 760
MPAK-12000-010 1600 70 315 805 760
MPAK-11999-010 1800 61 500 805 760
MPAK-11852-010 2000 61 560 805 760
