Upload
others
View
3
Download
0
Embed Size (px)
Citation preview
u
u
Polymeric Materials in Automotive PMA 2015 & Slovak Rubber Conference SRC 2015 1
International Conference
Polymeric Materials
in Automotive PMA 2015&
Slovak Rubber Conference 2015
PROGRAM
LIST OF PARTICIPANTS
May 26 - 28, 2015
Congress Centre Hotel Park Inn Danube
Bratislava, Slovak Republic
Organised by: Slovak University of Technology Faculty of Chemical and Food Technology Institute of Polymer Materials
Polymer Institute Slovak Academy of Sciences
2 Polymeric Materials in Automotive PMA 2015 & Slovak Rubber Conference SRC 2015
International ConferencePolymeric Materials
in Automotive PMA 2015&
Slovak Rubber Conference SRC 2015
ProgramTuesday (May 26, 2015)PMA 2015 & SRC 2015
Chairperson Ivan CHODÁK
10.00–10.15 Opening ceremony
10.15–11.00 Opening Invited Lecture
Štefan KLEIN AEROMOBILE - materials and development
11.00–11.45 Invited Main lecture Mohini M. SAIN Light-weighting for Automotive Industry
11.45–12.30 Invited Main lecture Frank CHARLES Advanced Technology of FE-SEM with Low kV Imaging for Functional Materials
12.30–14.00 Lunch
Chairperson Claus WRANA
14.00–14.45 Invited Main Lecture Toshio NISHI Polymer Nanotechnology for Advanced Elastomers
14.45–15.30 Invited Main Lecture Robert SCHUSTER
Increased Performance of speciality rubbers by Ionic Liquids
15. 30–16.00 Coffee Break
Chairperson Ulrich GIESE
16.00–16.30 Invited Lecture Joachim SUNDER Lab test procedures – valuable finding through lab tests for processing
16.30–17.00 Invited Lecture Libor HEGER Continental Matador Rubber, s.r.o. - focus R&D
17.00–17.30 Invited Lecture Tomáš DVOŘÁK Equipments for testing laboratory by JD Dvořák
17.30–18.30 Poster Session
Polymeric Materials in Automotive PMA 2015 & Slovak Rubber Conference SRC 2015 3
List of Posters
1.Kamila WITOWSKA, Jacek ANDRZEJEWSKI
THE INFLUENCE OF MALEIC ANHYDRIDE ADDITION ON THE MECHANICAL PROPERTIES OF PP/BUCKWHEAT HUSK COMPOSITES
2.
Ján BOČKAJ,RoderikPLAVEC, Leona KALIŇÁKOVÁ, Zuzana VANOVČANOVÁ,Jozef FERANC,Dagmara PERĎOCHOVÁ
INFLUENCE OF ADDITIVES ON CRYSTALLIZATION OF POLYLACTIC ACID
3.
Lenka BUŇOVÁ,Darina ONDRUŠOVÁ, Mariana PAJTÁŠOVÁ, Michaela ĎURČEKOVÁ, Slavomíra DOMČEKOVÁ
INFLUENCE OF PARTICLE SIZE OF FILLERS BASED ON CLINOPTILOLITE ON THE PROPERTIES OF POLYMERIC MATERIALS
4.
Ľudmila ČERNÁKOVÁ, Mária HNÁTOVÁ, Magdaléna WOLFOVÁ, Monika BOTOŠOVÁ
MODIFICATION OF POLYPROPYLENE NONWOVEN WITH CYCLODEXTRINS AND CITRIC ACID AS CROSSLINKING AGENT
5.
Slavomíra DOMČEKOVÁ, Darina ONDRUŠOVÁ, Mariana PAJTAŠOVÁ,Zuzana MIČICOVÁ,Michaela ĎURČEKOVÁ and Lenka BUŇOVÁ
APPLICATION OF MODIFIED ALTERNATIVE FILLER IN THE RUBBER COMPOUNDS
6.Rastislav DOSOUDIL and Mariana UŠÁKOVÁ
MAGNETIC AND MICROWAVE ABSORPTION PROPERTIES OF COMPOSITES FOR SHIELDING PURPOSES IN VEHICLES
7.Slávka ĎURKÁČOVÁ, Martin DANKO,Jaroslav MOSNÁČEK
PREPARATION OF FUNCTIONAL COPOLYMERS OF �-METHYLENE-?-BUTYROLACTONE AND ?-CAPROLACTONE
8.
Jozef FERANC,Adriana MIKULAJOVÁ, Roderik PLAVEC,Katarína TOMANOVÁ,Leona KALIŇÁKOVÁ,Zuzana VANOVČANOVÁ,Ján BOČKAJ, Pavol ALEXY and Ida VAŠKOVÁ
STUDY OF THE INFULENCE OF SLIP AGENTS ON PROPERTIES OF BIODEGRADABLE BLENDS BASED ON PLA/PHB
9.
Hidetoshi HIRAHARA,Jing SANG, Sumio AISAWA, Miura KATSUYA,Jan ORAVEC, Jozef PRETO, Jan Hronkovic and Pavol MELUS
IMPROVEMENT OF THE ADHESION OF UNVULCANIZED NR BLENDS TO CARBON-STEEL VIA SURFACE MODIFICATION
10.
Mária HNÁTOVÁ,Dagmara PERĎOCHOVÁ, Monika MICHLIKOVÁ,Dušan BAKOŠ
SURFACE MODIFICATION OF POLYURETHANE NONWOVEN LAYER BY PLASMA TREATMENT
11.
Ján HRONKOVIČ,Jozef PREŤO,Vladimír VANKO,Ivan HUDEC, Ivan CHODÁK
ANTIOXIDANT EFFECT OF LIGNOSULFONATE IN SIDEWALL RUBBER COMPOUND
4 Polymeric Materials in Automotive PMA 2015 & Slovak Rubber Conference SRC 2015
12.Ján HRONKOVIČ, Jozef PREŤO, Jan Oravec, Juraj VEREŠ and Ivan CHODÁK
THE APPROPRIATE COMPOSITION TO MODIFY RUBBER CRUMB AND ITS APPLICATION IN RUBBER COMPOUNDS
13.
Leona KALIŇÁKOVÁ, Roderik PLAVEC,Katarína TOMANOVÁ,Ján BOČKAJ,Zuzana VANOVČANOVÁ and Jozef FERANC
THE INFLUENCE OF INORGANIC FILLERS ON MECHANICAL PROPERTIES OF BIODEGRADABLE POLYMER BLENDS BASED ON POLYESTERS
14.
David MANAS, Miroslav MANAS, LenkaGAJZLEROVA,Michal STANEK, Martin OVSIK, Martin BEDNARIK, Jan NAVRATIL and Ales MIZERA
EFFECT OF LOW DOSES BETA IRRADIATION ON MECHANICAL PROPERTIES OF SURFACE LAYER OF INJECTION MOULDED POLYBUTYLENE TEREPHTHALATE (PBT)
15.
Zuzana MIČICOVÁ,Mariana PAJTÁŠOVÁ,Darina ONDRUŠOVÁ, Slavomíra DOMČEKOVÁ and Lukáš RANÍK
THE INFLUENCE OF SELECTED FILLERS ON TREAD COMPOUNDS PROPERTIES
16.Zuzana NÁDVORNÍKOVÁ, Miroslav VEČEŘA, Numan ALMONASY
THE USE OF COVALENTLY BOUND STABILIZERS IN POLYMER CHEMISTRY
17.
Jan ORAVEC, Jozef PRETO ,Pavol MELUS ,Michal ORAVEC andAlena KNAZEOVA
EVALUATION OF THERMOPLASTIC STARCHES AS COMPONENT OF RUBBER BLENDS
18. Zdeno PLEVÁKPOTENTIAL ACTIVATORS OF ADHESION OF REINFORCEMENT MATERIALS TO RUBBER
19.
Silvia PODHRADSKÁ,Matej MIČUŠÍK, Mária ŠIVOVÁ, František IVANIČ, Ivan CHODÁK
CORRELATION OF ELECTRICAL CONDUCTIVITY AND MECHANICAL PROPERTIES OF ELECTROCONDUCTIVE COMPOSITES BASED ON ELASTOMERIC OR THERMOPLASTIC MATRICES
20.
Jozef PREŤO, Ján HRONKOVIČ,Ján ORAVEC, Pavol MELUŠ,Dušan KOVÁČIK,Mirko ČERNÁK, Hidetoshi HIRAHARA and San Jing
SURFACE MODIFICATION OF CARBON-STEEL BY DCSBD PLASMA FOR IMPROVING GREEN RUBBER BLEND ADHESION
21.Franky PUYPE,Jiri SAMSONEKand David GREBENICEK
MASS SPECTRAL PROFILING OF ELEMENTS IN POLYMERS AND RUBBERS BY INDUCTIVELY COUPLED PLASMA – MASS SPECTROMETRY AND HYPHENATED SPECIATION ANALYSIS: A COMBINED ANALYTICAL AND EXPERIMENTAL STUDY
22.
Michaela SEDNIČKOVÁ, Daniela JOCHEC MOŠKOVÁ, Ivica JANIGOVÁ, Ľuboš JANKOVIČ, Zuzana NÓGELLOVÁ, Ivan CHODÁK
NATURAL RUBBER WITH MONTMORILLONITES AS THE COMPOSITES
23.
Petra SKALKOVÁ,Peter POČAROVSKÝ,Peter ČAKÁNEK,Mariana PAJTÁŠOVÁ, Eleonóra BENČÍKOVÁ
USING OF TPE WASTE IN BLENDS WITH NATURAL RUBBER
Polymeric Materials in Automotive PMA 2015 & Slovak Rubber Conference SRC 2015 5
Wednesday (May 27, 2015)Slovak Rubber Conference SRC 2015
Chairperson Wilma DIERKES
9.00 – 9.30 KL SUNDER Joachim Universal rheological tools for a better prediction of the processing behaviour of elastomers
9.30 – 10.00 KL DICK John Effects of Variation in Strain Measurements with the Extended Dynamic Range (EDR) of the RPA on the Accuracy of Shear Thinning Measurements for Rubber Compounds
10.00 – 10.20 CL WEIDENHAUPT Hermann-Josef
Vulkanol P – a new processing plasticizer
10.20 – 10.50 Coffee Break
Chairperson Winfried KUHN
10.50 – 11.20 KL DIERKES Wilma Devulcanization – short –loop recycling of passenger car tires
11.20 - 11.40 CL LIPOVSKÝ Peter Technology HOMATECH -W for processing rubber waste and tires
11.40 – 12.00 CL HASSE Andre Si 363 – Mixing and compounding strategies for maximum performance
12.00 – 12.20 CL SANG Jing Carbon-steel surface modification and special analysis of surface composition
12.30 – 14.00 Lunch
Chairperson Toshio NISHI
14.00 – 14.30 KL BREJCHA Jiří Alternative sources of Natural rubber - TKS a Guayule
14.30 – 14.50 CL VAŠKOVÁ Ida The properties of rubber composites with content of corn starch
14.50 – 15.10 CL KARL Christian Wolfgang Friction and wear of elastomer composites
15.10 - 15.40 KL DROBNÝ George Thermoplastic elastomers in automotive industry – what´s new
15.40 – 16.00 Coffee Break
Chairperson Andre HASSE
16.00 – 16.30 KL DAS Amit Commercial rubbers to sensors, actuators and self-healing rubbers
16.30 – 16.50 CL ŠPITÁLSKÝ Zdenko Electrically conductive composites based on an elastomeric matrix filled with expanded graphite as a potential oil sensing material
16.50 – 17.10 CL KRUŽELÁK Ján Sulphur and peroxide cured rubber sites with incorporated magnetic filler
17.10 - 17.30 CL SÝKORA Richard Thermo-oxidative ageing of magnetic composites based on NBR
Wednesday (May 27, 2015) Plastics in Automotive PMA 2015
Chairperson Pavol ALEXY
9.00 – 9.30 KL MAŇAS Miroslav Effect of beta irradiation on mechanical properties of surface layer of injection moulded HDPE
9.30 – 10.00 KL PRENZER Timo Innovative engineering plastics of BASF
10.00 –10.20 CL MOSNÁČKOVÁ Katarína Electrical and nanomechanical properties of poly(methyl methacrylate)/multiwalled carbon nanotubes composites as a function of preparation methods
10.20– 10.50 Coffee Break
6 Polymeric Materials in Automotive PMA 2015 & Slovak Rubber Conference SRC 2015
Chairperson Zdenko ŠPITALSKÝ
10.50 – 11.20 KL ALEXY Pavol Biopolymer blends with improved mechanical and thermal properties
11.20 – 11.40 CL HÁZ Aleš Stability of the lignin usable in production of bioplastics
11.40 – 12.00 CL VALENTÍN Marian Study of nanomechanical properties of plasma treated poly(lactic acid) samples with different crystallinity content
12.00 – 12.20 CL PLAVEC Roderik Mechanical and rheological properties of biodegradable polymer blends based on biopolyesters
12.30– 14.00 Lunch
Chairperson Dušan BAKOŠ
14.00 – 14.30
KL COLAMARTINO Savino Metal replacement by light weight plastic solutions
14.30 – 14.50 CL NOVÁK Igor Adhesive, surface and electrical properties of Ni-based composites
14.50 – 15.10 CL TIŇO Radovan Effect of low temperature atmospheric plasma with runaway electrons (ADRE plasma) on the wettability and activation of natural polymer surfaces
15.10 – 15.40 KL HAD Michal Measurement of physical properties in industry
15.40 – 16.00 Coffee break
Chairperson Miroslav MAŇAS
16.00 – 16.30 KL KHUNOVÁ Viera Biodegradable polymer nanocomposites based on natural nanotubes: effect of magnetised halloysite on structure and properties of polycaprolactone
16.30 – 16.50 CL SAMSONEK Jiří Polyester cord fabrics: influence of titanium dioxidenucleating agent quality on final mechanical properties
16.50 – 17.10 CL BUDZÁK Martin STERED® - a unique technology for material reprocessing of textile wastes originated from automotive industry
17.10 - 17.30 CL UJHÉLYIOVÁ Anna Technical polypropylene fibres with inorganic additives
Thursday (May 28, 2015)PMA 2015 & SRC 2015
Chairperson Ivan HUDEC
9.00 – 9.45 SAKURAI Satoshi(Invited Main Lecture)
Approach to Functional Materials’ Measurement with Solid State NMR
9.45 – 10.15 KL KUHN Winfried Investigation of molecular dynamics in crosslinked polymers using NMR methods - crosslinking, aging, filler-matrix interactions
10.15 – 10.45 KL PUYPE Franky The enhancement of combining reactive and non-reactive pyrolysis sample introduction methods hyphenated with gas chromatography and mass spectrometry for the composition analysis of complex polymer structures
10.45 – 11.15 Coffee break
Chairperson Robert SCHUSTER
11.15 – 12.00 WRANA Claus(Invited Main Lecture)
Advanced thermal and dynamic-mechanical methods for the characterization of tire properties
12.00 – 12.45 GIESE Ulrich(Invited Main Lecture)
Aging stability of NBR and HNBR elastomers – chemical reactions and measures
12.45 – 13.15 Wang Runguo(Invited Lecture)
Bio-based elastomers for enigneering applications for silica compounds
13.15 – 13.30 Conference Closing Ceremony
13.30 – 14.30 Lunch
CL - contributed lecture KL - key lecture