Polyurethane – PVC Free Technical Information

Polyurethane – PVC Free

GRADE 2 I 3 I 4 I 5 I 6 I 7 I 8 I 9

Polyurethane – PVC Free Grade

Castillo 3

Dot Com 3

10.15

Lesro Industries, Inc. | Bloomfield, CT 06002800.275.7545 | www.lesro.com

Fiber ContentPattern & Backing Finish Approx. Repeats Abrasion (D.R.) Light-fastness Flammability*

100% Polyurethane i-clean CALTB 117-2013,Sec.1CASTILLO 87% Polyester, Antimicrobial (none) 200,000 40 Hrs. NFPA 260 Class 1

13% Cotton Backing UFAC Class 1

100% Polyurethane i-clean CALTB 117-2013,Sec.1DOT COM 85% Polyester, Antimicrobial (none) 200,000 40 Hrs. NFPA 260 Class 1

15% Cotton Backing UFAC Class 1

*This term and any corresponding data refer to typical performance in the tests indicated and should not be construed to imply the behavior of this or any other materialunder actual fire conditions.

CAL TB 133*This term and any corresponding data refer to typical performance in the tests indicated and should not be construed to imply thebehavior of this or any other material under actual fire conditions. These patterns can be approved for California Technical Bulletin 133use when used in conjunction with other suitable components. Additional charges will apply. Please contact Lesro customer servicefor additional information.

Cleaning and Maintenance

For easy cleaning of recent soiling, promptly wash with a mild soap solution. For a previously soiled area that has not yet penetrated thepolyurethane surface, scrub with a soft brush using a mild, non-abrasive cleaner. Cleaning frequency depends on use. Clean and maintain yourfurniture regularly.

Clean all stains as quickly as possible and use the following cleaning procedure for the best results.

Step 1 Remove any excess spills with a damp cloth. Clean with a mild liquid soap and water mixture. Rinse with clear water and dry.

Step 2 Use straight application of concentrated cleaners such as Formula 409® or Fantastik®. Rinse with clear water. Wipe with a clean cloth.

Step 3 For more difficult stains, use a 5% mixture of bleach with water. Rinse with clear water and dry. Never use bleach in full strengthto clean polyurethane.

Important: Do not use alcohol based cleaning agents.

Recommendation: Please be sure to use a soft brush or cloth saturated with cleaning material. Always test cleaning methods on aninconspicuous area of the furniture. If stain persists, stain probably has set. Although these polyurethanes are resistantto most common stains, some fabric dyes and ballpoint inks can create a permanent stain.

Caution: This information is not a guarantee and does not relieve the user from the responsibility of the proper and safe use of these polyurethanes and all cleaning agents.

For memo samples, please contact:

CASTILLO GRADE 3 - CAL TB 133* (see back cover)

BATIK

CREAM WHITE

BUFF METAL

QUARRY STEELHONEY DEW CLEMENTINE

JAVA BLACKBREEZY RED

Lesro Industries, Inc www.lesro.com 800.275.7545

DOT COM GRADE 3 - CAL TB 133* (see back cover)

CLAY LAWNCOIN FAWN

CINNABAR RIVERBLACK COLA

BATIKPLATINUM HONEY

WHITE NUDE

Lesro Industries, Inc www.lesro.com 800.275.7545

Polyurethane – PVC Free Technical Information

Polyurethane – PVC Free

GRADE 2 I 3 I 4 I 5 I 6 I 7 I 8 I 9

Polyurethane – PVC Free Grade

Castillo 3

Dot Com 3

10.15

Lesro Industries, Inc. | Bloomfield, CT 06002800.275.7545 | www.lesro.com

Fiber ContentPattern & Backing Finish Approx. Repeats Abrasion (D.R.) Light-fastness Flammability*

100% Polyurethane i-clean CALTB 117-2013,Sec.1CASTILLO 87% Polyester, Antimicrobial (none) 200,000 40 Hrs. NFPA 260 Class 1

13% Cotton Backing UFAC Class 1

100% Polyurethane i-clean CALTB 117-2013,Sec.1DOT COM 85% Polyester, Antimicrobial (none) 200,000 40 Hrs. NFPA 260 Class 1

15% Cotton Backing UFAC Class 1

*This term and any corresponding data refer to typical performance in the tests indicated and should not be construed to imply the behavior of this or any other materialunder actual fire conditions.

CAL TB 133*This term and any corresponding data refer to typical performance in the tests indicated and should not be construed to imply thebehavior of this or any other material under actual fire conditions. These patterns can be approved for California Technical Bulletin 133use when used in conjunction with other suitable components. Additional charges will apply. Please contact Lesro customer servicefor additional information.

Cleaning and Maintenance

For easy cleaning of recent soiling, promptly wash with a mild soap solution. For a previously soiled area that has not yet penetrated thepolyurethane surface, scrub with a soft brush using a mild, non-abrasive cleaner. Cleaning frequency depends on use. Clean and maintain yourfurniture regularly.

Clean all stains as quickly as possible and use the following cleaning procedure for the best results.

Step 1 Remove any excess spills with a damp cloth. Clean with a mild liquid soap and water mixture. Rinse with clear water and dry.

Step 2 Use straight application of concentrated cleaners such as Formula 409® or Fantastik®. Rinse with clear water. Wipe with a clean cloth.

Step 3 For more difficult stains, use a 5% mixture of bleach with water. Rinse with clear water and dry. Never use bleach in full strengthto clean polyurethane.

Important: Do not use alcohol based cleaning agents.

Recommendation: Please be sure to use a soft brush or cloth saturated with cleaning material. Always test cleaning methods on aninconspicuous area of the furniture. If stain persists, stain probably has set. Although these polyurethanes are resistantto most common stains, some fabric dyes and ballpoint inks can create a permanent stain.

Caution: This information is not a guarantee and does not relieve the user from the responsibility of the proper and safe use of these polyurethanes and all cleaning agents.

For memo samples, please contact: