Tutorial by

Needle and Ted

70cm

55cm

55cm

Cut 2 trapezium shapes from your fabric,

I used NOSH Denim Look organic cotton.

Attach the pocket to the front of the poncho,

centred left and right about 12cm down from

the neck openingCut hood: 2 x main fabric, 2 x lining

Join main fabric with right sides together.

Repeat for the lining.

Place lining in the hood.

Join with right sides together.

Turn right side out.

Cut the front and back neck opening.

Join at the shoulders

with right sides together.

25cm 25cm

2cm

14cm

Cut pocket. 1x main fabric

1x lining. Join with right sides together,

leaving a small gap for turning.

Turn right side out and close the gap

22cm

27cm

15cm

28cm

41cm

32cm

Match centre back of poncho to the hood seam.

Pin hood around poncho neck opening,

overlap the flaps. Join with right sides together.I left my edges raw but you can hem them if you want to.

That’s it. I told you it was easy.

Ta dah!!!