8/14/2019 Pool Anti-Entrapment Cert - FILLABLE FORM.pdf

1/2

Revised 7/11

Certification of Pool/Spa Anti-Entrapment Cover

Installation

On January 1, 2007, the Swimming Pool Safety Act of 2006 (Assembly Bill 2977) became

effective and will require the following:

Whenever a building permit is issued for the remodel or modification of a singlefamily home with an existing swimming pool, toddler pool, or spa, or whenever an

existing swimming pool, toddler pool, or spa, is remodeled, the permit shall requirethat the suction outlet(s) of the existing swimming pool, toddler pool or spa beupgraded so as to be equipped with an anti-entrapment cover meeting current

standards of the American Society for Testing and Materials or the American Society

of Mechanical Engineers (ASME/ANSI Al 12.19.8).

An inspection is required to verify compliance with the above noted requirement prior to finalapproval. If you do not wish to drain your pool to facilitate this inspection, you may choose to

complete and sign the certificate below attesting compliance with the above noted

requirement.

CertificationI, _________________________________ (Print Name), hereby certify that I am the owner of

the property located at ___________________________________________ (Site

Address), and that the suction outlet(s) of the existing swimming pool, toddler pool or spa isequipped with an anti-entrapment cover meeting the current standards of ASME/ANSI

Al12.19.8.

City of El CajonBuilding and Fire Safety Division200 Civic Center Way.El Cajon, CA 92020Phone: (619) 441-1726Inspection Request Line (619) 441-6210

Permit No.:________________________________ Date: ______________________

Home Owner's Name & Signature: _____________________________________

8/14/2019 Pool Anti-Entrapment Cert - FILLABLE FORM.pdf

2/2

Revised 7/11

ATTENTION POOL OWNERSRequiring Anti-Entrapment Suction Outlets Cover

Effective January 1, 2007, Swimming Pool and Safety Act of 2006 (Assembly Bill 2977)

requires the following:

Whenever a building permit is issued for the remodel or modification of a single family

home with an existing swimming pool, toddler pool, or spa, or whenever an existing

swimming pool, toddler pool, or spa, is remodeled, the permit shall require that the

suction outlet(s) of the existing swimming pool, toddler pool or spa be upgraded so as tobe equipped with an anti-entrapment cover meeting current standards of the American

Society for Testing and Materials or the American Society of Mechanical Engineers

(ASME/ANSI Al 12.19.8).

An inspection is required to verify compliance with the above noted requirement prior to finalapproval. If you do not wish to drain your pool to facilitate this inspection, you may choose to

complete and sign a certificate attesting compliance with the above noted requirement.

The City's interpretation of the wording "a building permit is issued for the remodel or

modification of a single family home" to mean any building permit issued for work on theproperty except for maintenance, replacement and/or repair permits such as water heater

replacement permit, gas line repair permit, foundation repair permit, etc.

For pool safety and product information, please visit the following websites:

The United States Consumer Product Safety Commissionhttp://wwxA,.cpsc.,-,ov/cpscpub/pLibst/chdrowii.liti-ni

The American Academy of Pediatrics

littp://www.aap.oi-g/taiiiilv/tipppool.hti-n

The California Coalition For Children's Safety and Health

littp://www.sacadvocacy.coi-n/cccsti/cccshabOLIt.iltMI