Embed Size (px)
Citation preview
PLC port control AP
Port1 AP1 Port2 AP2 Port3 AP3
Common Communication Data Storage
Communication Data AP
Multi-gateway provides the transparent communication way to serve all of the APs or devices
Integration is a very important part in the automation fields. Most of the PLC lack of the communication and data storage function. Multi-gateway is becoming an assis-tant to help PLC solve the protocol conversion or data communication.
Solution 1: There are three fields want to monitor a Omron C series PLC. The Omron C series PLC lack of extension RS232 port. So we use multi-gateway to solve the problem.
Solution2: It’s difficult to fetch the data from the Modbus devices such as power meters or another special protocol devices. We use multi-gateway to integrate the Modbus devices and Omron C series PLC. We could also provide the data to two more HMI through multi-gateway.
Embedded Communication & [email protected]
http://www.opctechs.comEmbedded Communication & [email protected]
http://www.opctechs.com
PLC port control AP
Port1 AP1 Port2 AP2 Port3 AP3
Common Communication Data Storage
Communication Data AP
Multi-gateway provides the transparent communication way to serve all of the APs or devices
Integration is a very important part in the automation fields. Most of the PLC lack of the communication and data storage function. Multi-gateway is becoming an assis-tant to help PLC solve the protocol conversion or data communication.
Solution 1: There are three fields want to monitor a Omron C series PLC. The Omron C series PLC lack of extension RS232 port. So we use multi-gateway to solve the problem.
Solution2: It’s difficult to fetch the data from the Modbus devices such as power meters or another special protocol devices. We use multi-gateway to integrate the Modbus devices and Omron C series PLC. We could also provide the data to two more HMI through multi-gateway.
Embedded Communication & [email protected]
http://www.opctechs.comEmbedded Communication & [email protected]
http://www.opctechs.com
![Installation Manual Model NAVpilot-700/711/720/711C · emergency stop button, set [IN PORT1] or [IN PORT2] to [GO STBY] on the [UNIVERSAL PORT] menu (see section 3.9). ii SYSTEM CONFIGURATION](https://img.pdfslide.net/doc/110x75/5f9430a1e098772a2b193d43/installation-manual-model-navpilot-700711720711c-emergency-stop-button-set-in.jpg)
