Power Point Aplikasi Matematika (Eksponen Dan Integral)

Identitas dan prpogram matematika dengan menggunakan array

Dibuat untuk Memenuhi Tugas Akhir Mata Kuliah Program Komputer yang Diampuh oleh

Drs. Deddy Sofyan, M.PdOleh

Nolis Widiawati (09511032)2 A

PENDIDIKAN MATEMATIKASTKIP GARUT

IDENTITAS MENGGUNAKAN ARRAY

Tampilan sebelum di run

Tampilan Setelah DiRun...

LISTING PROGRAM procedure TForm1.Button1Click(Sender: TObject);vars:string;p,i:integer;No:array[1..20]of string;NoPeserta:array[1..20]of string;Lombayangdiikuti:array[1..20]of string;Nama:array[1..20]of string;JenisKelamin:array[1..20]of string;Kelahiran:array[1..20]of string;alamat:array[1..20]of string;

begin listbox1.Items.Clear; s:=inputbox('Loop','jumlah perulangan',''); p:=strtoint(s); stringgrid1.Cells[0,0]:='No'; stringgrid1.Cells[1,0]:='NoPeserta'; stringgrid1.Cells[2,0]:='Lombayangdiikuti'; stringgrid1.Cells[3,0]:='Nama'; stringgrid1.Cells[4,0]:='JenisKelamin'; stringgrid1.Cells[5,0]:='Kelahiran'; stringgrid1.Cells[6,0]:='alamat';

for i := 1 to p do begin no[i]:=inputbox('ID','No',''); nopeserta[i]:=inputbox('ID','NoPeserta','');

lombayangdiikuti[i]:=inputbox('ID','Lombayangdiikuti','');

nama[i]:=inputbox('ID','Nama','');

jeniskelamin[i]:=inputbox('ID','JenisKelamin',''); kelahiran[i]:=inputbox('ID','Kelahiran',''); alamat[i]:=inputbox('ID','alamat','');

listbox1.Items.Add(inttostr(i)+','+no[i]);

listbox1.Items.Add(inttostr(i)+','+nopeserta[i]);

listbox1.Items.Add(inttostr(i)+','+lombayangdiikuti[i]);

listbox1.Items.Add(inttostr(i)+','+nama[i]);

listbox1.Items.Add(''+jeniskelamin[i]);

listbox1.Items.Add(''+kelahiran[i]);

listbox1.Items.Add(''+alamat[i]);

stringgrid1.cells[0,i]:=no[i];

stringgrid1.cells[1,i]:=nopeserta[i];

stringgrid1.cells[2,i]:=lombayangdiikuti[i];

stringgrid1.cells[3,i]:=nama[i];

stringgrid1.cells[4,i]:=jeniskelamin[i];

stringgrid1.cells[5,i]:=kelahiran[i];

stringgrid1.cells[6,i]:=alamat[i];

end;

end;

end.

Program MatematikaMenggunakan Array

LoadingSebelum dan sesudah dirun

LISTING PROGRAMvar Form1: TForm1; b,S:real;Implementationuses MainMenu, PerkalianEksponen;{$R *.dfm}procedure TForm1.BitBtn1Click(Sender: TObject);begintimer1.Enabled:=false;label3.Visible:=false;if (edit1.Text='hamzah') or (edit1.Text='HAMZAH') then begin TIMER1.Enabled:=TRUE; end else if edit1.text='' then begin MessageBox(0,'Silahkan Masukkan Password !','Peringatan',

+mb_OK+mb_ICONINFORMATION); edit1.SetFocus; end elsebegin MessageBox(0,'Password yang Anda Masukkan Salah !‘,'Peringatan‘, +mb_OK+mb_ICONINFORMATION); edit1.Text:=''; edit1.SetFocus;end; end;if b=24 then beginlabel1.Caption:=''; b:=0; end; S:=S+1;if S=24 thenbeginform1.Hide; form2.show;End end;

procedure TForm1.Timer1Timer(Sender: TObject);beginb:=b+1;if b=1 then label1.Caption:='S';if b=2 then label1.caption:=label1.Caption+'e';if b=3 then label1.caption:=label1.Caption+'l';if b=4 then label1.caption:=label1.Caption+'a';if b=5 then label1.caption:=label1.Caption+'m';if b=6 then label1.caption:=label1.Caption+’a';if b=7 then label1.caption:=label1.Caption+‘t ';if b=8 then label1.caption:=label1.Caption+‘P';if b=9 then label1.caption:=label1.Caption+‘a';if b=10 then label1.caption:=label1.Caption+‘s';if b=11 then label1.caption:=label1.Caption+‘s';if b=12 then label1.caption:=label1.Caption+‘w';if b=13 then label1.caption:=label1.Caption+‘o';

if b=14 then label1.caption:=label1.Caption+‘rd ';if b=15 then

label1.caption:=label1.Caption+'A';if b=16 then label1.caption:=label1.Caption+'n';if b=17 then label1.caption:=label1.Caption+'d';if b=18 then label1.caption:=label1.Caption+'a ';if b=19 then label1.caption:=label1.Caption+'B';if b=20 then label1.caption:=label1.Caption+'e';if b=21 then label1.caption:=label1.Caption+'n';if b=22 then label1.caption:=label1.Caption+'a';if b=23 then label1.caption:=label1.Caption+'r';

if b=24 thenbeginlabel1.Caption:='';b:=0;end;S:=S+1;if S=24 thenbeginform1.Hide;form2.show;endend;

procedure TForm1.Timer2Timer(Sender: TObject);

beginlabel4.Visible:=true;timer3.Enabled:=true;timer2.Enabled:=false;end;

procedure TForm1.Timer3Timer(Sender: TObject);beginlabel4.Visible:=false;timer2.Enabled:=true;timer3.Enabled:=false;end;End.

Main MenuSebelum dan Sesudah Dirun

Listing Program Main menuprocedure TForm2.KaliClick(Sender: TObject);beginform3.showmodal; end;procedure TForm2.BagiClick(Sender: TObject);beginform4.showmodal; end;procedure TForm2.PangkatClick(Sender: TObject);beginform5.showmodal; end;procedure TForm2.AkarClick(Sender: TObject);beginform6.showmodal; end;procedure TForm2.tentangeksponen1Click(Sender: TObject);

begin

form7.show; end;procedure TForm2.tentangProgramAplikasi1Click(Sender: TObject);beginform8.show;end;procedure TForm2.entangProgremer1Click(Sender: TObject);beginform9.show;end;procedure TForm2.Keluar2Click(Sender: TObject);beginapplication.Terminate;end;

procedure TForm2.Timer1Timer(Sender: TObject);beginTimer1.Interval:=15;image1.Left:=image1.Left+1;if image1.Left=1 then begin image2.visible:=true; image3.visible:=false; image4.visible:=false; image5.visible:=false; image6.visible:=false; endelse if image1.Left=60 then begin image2.visible:=true; image3.visible:=true; image4.visible:=false; image5.visible:=false; image6.visible:=false; endelse if image1.Left=120 then

begin

image2.visible:=true; image3.visible:=true; image4.visible:=true; image5.visible:=false; image6.visible:=false; endelse if image1.Left=180 then begin image2.visible:=true; image3.visible:=true; image4.visible:=true; image5.visible:=true; image6.visible:=false; endelse if image1.Left=240 then begin image2.visible:=true; image3.visible:=true; image4.visible:=true; image5.visible:=true; image6.visible:=true; end

else if image1.Left=350 then begin image2.visible:=true; image3.visible:=true; image4.visible:=true; image5.visible:=true; image6.visible:=false; endelse if image1.Left=410 then begin image2.visible:=true; image3.visible:=true; image4.visible:=true; image5.visible:=false; image6.visible:=false; endelse if image1.Left=470 then begin image2.visible:=true; image3.visible:=true; image4.visible:=false; image5.visible:=false; image6.visible:=false; endelse if image1.Left=530 then begin

image2.visible:=true; image3.visible:=false; image4.visible:=false; image5.visible:=false; image6.visible:=false; endelse if image1.Left=590 then begin image2.visible:=false; image3.visible:=false; image4.visible:=false; image5.visible:=false; image6.visible:=false;

end;if image1.Left>680 thenbeginimage1.Left:=image1.Left*0;image2.visible:=false;image3.visible:=false;image4.visible:=false;image5.visible:=false;image6.visible:=false;end;end;

procedure TForm2.Timer2Timer(Sender: TObject);beginlabel7.Caption :=('====================== '+formatdatetime('dddd ',(now))+formatdatetime(' d mmmm yyyy',(now))+formatdatetime(' hh : mm : ss',(now))+' ==========');end;

procedure TForm2.Timer3Timer(Sender: TObject);beginTimer3.Interval:=15;label11.Left:=Label11.Left-1;if Label11.Left<-1320 thenbeginLabel11.Left:=Label11.Left*-1;end;end;

procedure

TForm2.Integgral1Click(Sender: TObject);beginform10.showmodal;end;

end.

• Aplikasi Sifat-sifat Ekponen yang terdiri dari:– Perkalian Eksponen– Pembagian Eksponen– Perpangkatan Eksponen– Pengakaran Eksponen

Aplikasi Integral dan sifat-sifatnya: Integral tertentu Sifat Asosiatif Penjumlahan Sifat Asosiatif Pengurangan Sifat Kekontinuan Sifat Kesimetrisan

Penampilan Biodata dan form bantuan lain

APLIKASI ISI DARI MAIN MENU

Perkalian Eksponen

Pembagian Eksponen

Perpangkatan Eksponen

Akar Eksponen

LISTING PROGRAM APLIKASI EKSPONEN

Pada Umumnya Menggunakan empat bahasa delphi yaitu :Array, if then, Timer dan Xp.

• Semua aplikasi eksponen menggunakan bahasa array yaitu code editor sebagi berikut :

Form(…): Tform(…); a,b:integer; l:array[1..100] of real; m:array[1..100] of real; n:array[1..100] of real; x:array[1..100] of real; y:array[1..100] of real; z:array[1..100] of real;Implementation{$R *.dfm}procedure

Form3: TForm3; a,b:integer; l:array[1..100] of real; m:array[1..100] of real; n:array[1..100] of real; x:array[1..100] of real; y:array[1..100] of real; z:array[1..100] of real;Implementation{$R *.dfm}procedure TForm3.FormCreate(Sender: TObject);begina:=1;edit2.Text:=inttostr(a);end;

L i s ti n g p r o g r a m u n t u k f o r m 3


procedure TForm3.FormCreate(Sender: TObject);

begina:=1;edit2.Text:=inttostr(a);end;

procedure TForm3.BitBtn2Click(Sender: TObject);

begina:=1;edit2.Text:=inttostr(a);edit1.clear; edit3.clear;edit4.clear; edit5.clear;

listbox1.Clear; edit3.SetFocus;end;

procedure TForm3.BitBtn3Click(Sender: TObject);begincloseend;

end.

• Code editor yang digunakan di semua aplikasi eksponen yaitu:


procedure TForm3.BitBtn1Click(Sender: TObject);beginb:=strtoint(edit1.Text);if a<=b then l[a]:=strtofloat(edit3.Text); m[a]:=strtofloat(edit4.Text); n[a]:=strtofloat(edit5.Text); x[a]:=exp(m[a]*ln(l[a])); y[a]:=exp(n[a]*ln(l[a])); z[a]:=exp((m[a]+n[a])*ln(l[a])); edit3.SetFocus; label7.Caption:=(floattostr(l[a])+' x

'+floattostr(l[a])+' = '+floattostr(l[a])+' = '+floattostr(z[a]));

label8.Caption:=(floattostr(m[a])); label9.Caption:=(floattostr(n[a])); label10.Caption:=('('+floattostr(m[a])

+'+'+floattostr(n[a])+')');listbox1.Items.add('==========================

==================='); listbox1.Items.add(' DATA KE

'+inttostr(a));listbox1.Items.add('==========================

==================='); listbox1.Items.add('a = '+floattostr(l[a])+', m =

'+floattostr(m[a])+', n = '+floattostr(n[a]));

listbox1.Items.add('------------------------------------------------------------------------------------------');

• Code editor yang digunakan berbeda pada aplikasi eksponen yaitu:• Perkalian:

listbox1.Items.add(' => '+floattostr(l[a])+'^'+floattostr(m[a])+' x '+floattostr(l[a])+'^'+floattostr(n[a])+'= '+floattostr(x[a])+' x '+floattostr(y[a])+' = '+floattostr(z[a])); listbox1.Items.add(' => '+floattostr(l[a])+'^('+floattostr(m[a])+' + '+floattostr(n[a])+') = '+floattostr(l[a])+'^('+floattostr(m[a]+n[a])+')'+'='+floattostr(z[a])); listbox1.Items.add('--------------------------------------------------------'); listbox1.Items.add('Maka : '+floattostr(l[a])+'^'+floattostr(m[a])+' x '+floattostr(l[a])+'^'+floattostr(n[a])+'= '+floattostr(l[a])+'^('+floattostr(m[a]+n[a])+')'); listbox1.Items.add('--------------------------------------------------------'); listbox1.Items.add('');if a<b then begin a:=a+1; edit2.Text:=inttostr(a);

endelse if a=b then messageDlg('Stop Data Bilangan Sudah '+inttostr(b)+' Buah',mtInformation,[mbYes],0);

end;procedure TForm3.BitBtn2Click(Sender: TObject);begina:=1;edit2.Text:=inttostr(a);edit1.clear;edit3.clear;edit4.clear;edit5.clear;listbox1.Clear;edit3.SetFocus;end;

procedure TForm3.BitBtn3Click(Sender: TObject);begincloseend;end.


procedure TForm4.BitBtn1Click(Sender: TObject); b:=strtoint(edit1.Text);if a<=b then l[a]:=strtofloat(edit3.Text); m[a]:=strtofloat(edit4.Text); n[a]:=strtofloat(edit5.Text); x[a]:=exp(m[a]*ln(l[a])); y[a]:=exp(n[a]*ln(l[a])); z[a]:=exp((m[a]-n[a])*ln(l[a])); edit3.SetFocus; label7.Caption:=(floattostr(l[a])+' : '+floattostr(l[a])

+' = '+floattostr(l[a])+' = '+floattostr(z[a])); label8.Caption:=(floattostr(m[a])); label9.Caption:=(floattostr(n[a])); label10.Caption:=('('+floattostr(m[a])

+'-'+floattostr(n[a])+')');

listbox1.Items.add('=============================================');

listbox1.Items.add(' DATA KE '+inttostr(a));


listbox1.Items.add('a = '+floattostr(l[a])+', m = '+floattostr(m[a])+', n = '+floattostr(n[a]));

listbox1.Items.add('-------------------------------------------------------------------------------------------');

• Code editor yang digunakan berbeda pada aplikasi eksponen yaitu:• Pembagian:

listbox1.Items.add(' => '+floattostr(l[a])+'^'+floattostr(m[a])+' : '+floattostr(l[a])+'^'+floattostr(n[a])+'= '+floattostr(x[a])+' : '+floattostr(y[a])+' = '+floattostr(z[a])); listbox1.Items.add(' => '+floattostr(l[a])+'^('+floattostr(m[a])+' - '+floattostr(n[a])+') = '+floattostr(l[a])+'^('+floattostr(m[a]-n[a])+')'+'='+floattostr(z[a])); listbox1.Items.add('-------------------------------------------------------------'); listbox1.Items.add('Maka : '+floattostr(l[a])+'^'+floattostr(m[a])+' : '+floattostr(l[a])+'^'+floattostr(n[a])+'= '+floattostr(l[a])+'^('+floattostr(m[a]-n[a])+')');

listbox1.Items.add('---------------------------------------------------------------'); listbox1.Items.add('');if a<b then begin a:=a+1;

edit2.Text:=inttostr(a); endelse if a=b then messageDlg('Stop Data Bilangan Sudah '+inttostr(b)+' Buah',mtInformation,[mbYes],0);end;


procedure TForm5.BitBtn1Click(Sender: TObject);beginb:=strtoint(edit1.Text);if a<=b then l[a]:=strtofloat(edit3.Text); m[a]:=strtofloat(edit4.Text); n[a]:=strtofloat(edit5.Text); x[a]:=exp(m[a]*ln(l[a])); y[a]:=exp(n[a]*ln(l[a])); z[a]:=exp((m[a]*n[a])*ln(l[a])); edit3.SetFocus; label7.Caption:=('('+floattostr(l[a])+' ) '+' =

'+floattostr(l[a])+' = '+floattostr(z[a])); label8.Caption:=(floattostr(m[a])); label9.Caption:=(floattostr(n[a])); label10.Caption:=('('+floattostr(m[a])

+'*'+floattostr(n[a])+')');


listbox1.Items.add(' DATA KE '+inttostr(a));




• Code editor yang digunakan berbeda pada aplikasi eksponen yaitu:• Pemangkatan:

listbox1.Items.add(' => ('+floattostr(l[a])+'^'+floattostr(m[a])+' )^ '+floattostr(n[a])+'= '+floattostr(x[a])+' ^ '+floattostr(n[a])+' = '+floattostr(z[a]));

listbox1.Items.add(' => '+floattostr(l[a])+'^('+floattostr(m[a])+' * '+floattostr(n[a])+') = '+floattostr(l[a])+'^('+floattostr(m[a]*n[a])+')'+'='+floattostr(z[a]));


listbox1.Items.add('Maka : ('+floattostr(l[a])+'^'+floattostr(m[a])+' )^ '+floattostr(n[a])+'= '+floattostr(l[a])+'^('+floattostr(m[a]*n[a])+')');


listbox1.Items.add('');if a<b then begin

a:=a+1; edit2.Text:=inttostr(a); endelse if a=b then messageDlg('Stop Data Bilangan Sudah

'+inttostr(b)+' Buah',mtInformation,[mbYes],0);

end;nd;


procedure TForm6.BitBtn1Click(Sender: TObject);beginimage2.Visible:=true;b:=strtoint(edit1.Text);if a<=b then l[a]:=strtofloat(edit3.Text); m[a]:=strtofloat(edit4.Text); n[a]:=strtofloat(edit5.Text); x[a]:=exp(m[a]*ln(l[a])); y[a]:=exp(1/n[a]*ln(l[a])); z[a]:=exp((m[a]/n[a])*ln(l[a])); edit3.SetFocus; label7.Caption:=(floattostr(l[a])+' =

'+floattostr(l[a])+' = '+floattostr(z[a])); label8.Caption:=(floattostr(m[a])); label9.Caption:=(floattostr(n[a])); label10.Caption:=('('+floattostr(m[a])

+'/'+floattostr(n[a])+')');

listbox1.Items.add('==========================

==================='); listbox1.Items.add(' DATA KE

'+inttostr(a));




• Code editor yang digunakan berbeda pada aplikasi eksponen yaitu:• Pengakaran:

listbox1.Items.add(' => '+floattostr(l[a])+'^'+floattostr(m[a])+' akar '+floattostr(n[a])+'= '+floattostr(x[a])+' ^ '+floattostr(1/n[a])+' = '+floattostr(z[a]));

listbox1.Items.add(' => '+floattostr(l[a])+'^('+floattostr(m[a])+' / '+floattostr(n[a])+') = '+floattostr(l[a])+'^('+floattostr(m[a]/n[a])+')'+' = '+floattostr(z[a]));


listbox1.Items.add('Maka : ('+floattostr(l[a])+'^'+floattostr(m[a])+' ) akar '+floattostr(n[a])+' = '+floattostr(l[a])+'^('+floattostr(m[a]*n[a])+')');


listbox1.Items.add('');if a<b then begin

a:=a+1; edit2.Text:=inttostr(a); endelse if a=b then messageDlg('Stop Data Bilangan Sudah

'+inttostr(b)+' Buah',mtInformation,[mbYes],0);

end;

Biodata Programer

Listing program Biodataprocedure TForm9.Timer1Timer(Sender:

TObject);beginlabel1.Visible:=true;label2.Visible:=FALSE;timer2.Enabled:=true;timer1.Enabled:=false;end;

procedure TForm9.Timer2Timer(Sender: TObject);

beginlabel1.Visible:=false;label2.Visible:=true;

timer1.Enabled:=true;timer2.Enabled:=false;end;

procedure TForm9.FormCreate(Sender: TObject);

begintimer2.Enabled:=false;label3.Visible:=TRUE;label2.Visible:=false;label1.Visible:=false;end;end.

Integral Tertentu

Asosiatif Penjumlahan

Asosiatif Pengurangan

Sifat Kesimetrisan

Code Editor:procedure TForm10.BitBtn3Click(Sender: TObject);beginclose;end;

procedure TForm10.BitBtn2Click(Sender: TObject);beginedit1.Clear;edit2.Clear;edit3.Clear;edit4.Clear;edit5.Clear;integral.Visible:=false;end;

procedure TForm10.BitBtn1Click(Sender: TObject);

vara,b,k,n,p:integer;x,y,h:real;begina:=strtoint(edit1.Text);b:=strtoint(edit2.Text);k:=strtoint(edit3.Text);n:=strtoint(edit4.Text);p:=n+1;x:=(k/p)*(exp(p*ln(a)));y:=(k/p)*(exp(p*ln(b)));h:=x-y;edit5.Text:=floattostr(h);integral.Visible:=true;end;

end.


procedure TForm11.BitBtn2Click(Sender: TObject);beginedit1.clear; edit2.clear; edit3.clear; edit4.clear;edit5.clear; edit6.clear;edit7.clear; edit8.clear;edit9.clear; edit10.clear;edit11.clear; edit12.clear;edit13.clear; edit14.clear;edit15.clear; edit16.clear;edit17.clear; edit18.clear;integral2.Visible:=false;end;

procedure TForm11.BitBtn1Click(Sender: TObject);var a,b,k1,k2,n1,n2,c,d:integer;e,e1,e2,f,f1,f2,h:real;begina:=strtoint(edit1.text);b:=strtoint(edit2.text);k1:=strtoint(edit3.text);

k2:=strtoint(edit4.text);n1:=strtoint(edit5.text);n2:=strtoint(edit6.text);

c:=n1+1;d:=n2+1;e1:=(k1/c)*(exp(c*ln(a)));e2:=(k1/c)*(exp(c*ln(b)));e:=e1-e2;f1:=(k2/d)*(exp(d*ln(a)));f2:=(k2/d)*(exp(d*ln(b)));f:=f1-f2;h:=e+f;edit7.Text:=floattostr(h);edit8.Text:=edit1.Text;edit9.Text:=edit2.Text;edit10.Text:=edit3.Text;edit11.Text:=edit5.Text;edit12.Text:=floattostr(e);edit13.Text:=edit1.Text;edit14.Text:=edit2.Text;edit15.Text:=edit4.Text;edit16.Text:=edit6.Text;edit17.Text:=floattostr(f);edit18.Text:=floattostr(h);integral2.Visible:=true;label19.Caption:='Hasil ruas kiri sama dengan hasil ruas kanan';end;end

Code Editor:procedure TForm12.BitBtn1Click(Sender: TObject);vara,b,k1,k2,n1,n2,c,d:integer;e,e1,e2,f,f1,f2,h:real;begina:=strtoint(edit1.text);b:=strtoint(edit2.text);k1:=strtoint(edit3.text);k2:=strtoint(edit4.text);n1:=strtoint(edit5.text);n2:=strtoint(edit6.text);c:=n1+1;d:=n2+1;e1:=(k1/c)*(exp(c*ln(a)));e2:=(k1/c)*(exp(c*ln(b)));e:=e1-e2;f1:=(k2/d)*(exp(d*ln(a)));f2:=(k2/d)*(exp(d*ln(b)));f:=f1-f2;h:=e-f;edit7.Text:=floattostr(h);edit8.Text:=edit1.Text;edit9.Text:=edit2.Text;edit10.Text:=edit3.Text;edit11.Text:=edit5.Text;edit12.Text:=floattostr(e);edit13.Text:=edit1.Text;edit14.Text:=edit2.Text;

edit15.Text:=edit4.Text;

edit16.Text:=edit6.Text;edit17.Text:=floattostr(f);edit18.Text:=floattostr(h);integral3.Visible:=true;label19.Caption:='Hasil ruas kiri sama dengan hasil ruas kanan';end;procedure TForm12.BitBtn2Click(Sender: TObject);beginedit1.clear; edit2.clear;edit3.clear; edit4.clear;edit5.clear; edit6.clear;edit7.clear; edit8.clear;edit9.clear; edit10.clear;edit11.clear; edit12.clear;edit13.clear; edit14.clear;edit15.clear; edit16.clear;edit17.clear; edit18.clear;integral3.Visible:=false;label19.Caption:=' ';end;procedure TForm12.BitBtn3Click(Sender: TObject);beginclose;end;end.

Code Editor:procedure TForm13.BitBtn1Click(Sender: TObject);varc,a,b,k,n,p:integer;x,y,h1,h2,h3,w:real;beginc:=strtoint(edit1.Text);a:=strtoint(edit2.Text);k:=strtoint(edit3.Text);n:=strtoint(edit4.Text);p:=n+1;x:=(k/p)*(exp(p*ln(c)));y:=(k/p)*(exp(p*ln(a)));h1:=x-y;edit5.Text:=floattostr(h1);integral4.Visible:=true;b:=strtoint(edit6.Text);edit7.Text:=edit2.Text;edit8.Text:=edit3.Text;edit9.Text:=edit4.Text;w:=(k/p)*(exp(p*ln(b)));h2:=w-y;edit10.Text:=floattostr(h2);edit11.Text:=edit1.Text;edit12.Text:=edit6.Text;edit13.Text:=edit3.Text;edit14.Text:=edit4.Text;h3:=x-w;

edit15.Text:=floattostr(h3);

edit16.Text:=floattostr(h1);label4.Caption:='Hasil ruas kiri sama dengan hasil ruas kanan';end;

procedure TForm13.BitBtn2Click(Sender: TObject);beginedit1.clear; edit2.clear;edit3.clear; edit4.clear;edit5.clear; edit6.clear;edit7.clear; edit8.clear;edit9.clear; edit10.clear;edit11.clear; edit12.clear;edit13.clear; edit14.clear;edit15.clear; edit16.clear;integral4.Visible:=false;label4.Caption:=' ';end;

procedure TForm13.BitBtn3Click(Sender: TObject);beginclose;end;

end.


procedure TForm14.BitBtn2Click(Sender: TObject);beginedit1.clear;edit2.clear;edit3.clear;edit4.clear;edit5.clear;edit6.clear;edit7.clear;edit8.clear;edit9.clear;edit10.clear;integral5.Visible:=false;label11.caption:=' ';end;

procedure TForm14.BitBtn1Click(Sender: TObject);vara,b,k,n,p:integer;x,h:real;begina:=strtoint(edit1.Text);b:=-1*a;

edit2.Text:=inttostr(b);k:=strtoint(edit3.Text);n:=strtoint(edit4.Text);p:=n+1;x:=(k/p)*(exp(p*ln(a)));h:=2*x;label11.Caption:='Hasil ruas kiri sama dengan hasil ruas kanan';if n mod 2=0 thenedit5.Text:=floattostr(h)elseedit5.Text:='0';edit6.Text:=edit1.Text;edit7.Text:='0';edit8.Text:=edit3.Text;edit9.Text:=edit4.Text;if n mod 2=0 thenedit10.Text:=floattostr(h)elseedit10.Text:='0';integral5.Visible:=true;end;

end.

SEKIAN DAN

TERIMA KASIH

Documents

Power Point Aplikasi Matematika (Eksponen Dan Integral)