POWER TRANSMISSION PRODUCTS - Drive Components LLC

POWER TRANSMISSION PRODUCTS

WWW.DRIVECOMPONENTSLLC.COM

www.drivecomponentsllc.com2

ordering inFormAtion

drive components online ordering progrAm is currently being upgrAded to enhAnce your web site shopping

experience.

to order in the interim, contAct your drive components sAles representAtive or our customer service desk.

drive components, llc6519 eastland road #106

brookpark, oh 44142phone: 440.234.6200FAx: 440.234.1200

email: [email protected]

customer service hoursmon.– Fri. 8:00 Am – 5:00 pm cst

www.drivecomponentsllc.com 3

Table of ConTenTs

product pAge(s)ordering inFormAtion 2A-b combinAtion groove Qd* sheAves 4-11c section Qd* sheAves (1-10 groove) 12-19no gAmble gAmble 253v Qd* sheAves (1-10 groove) 19-275v Qd* sheAves (2-10 groove) 28-348v Qd* sheAves (4-10 groove) 35-39rim speed cAlculAtion 35tAper lock bushings 37Ak-bk Fhp pulleys - Fixed bore 40,412Ak-2bk Fhp pulleys - Fixed bore 42-43Akh-bkh: 2Akh-2bkh Qd* Fhp pulleys 44-47vp-vl vAriAble pitch pulleys - Fixed bore 48,49Qd* bushings - inch And metric 50-54terms oF sAle 55

cAtAlog

* QD is a registered trademark of emerson Power Transmission.

A condensed listing of drive components products and pricing is available. request the product guide & price list brochure dc-06-11 by calling 440.234.6200 or email us at [email protected].

information on our products and on our company can be found throughout this catalog. we believe you will find these Facts useful and informative. if you have questions on any of the facts, please contact us.

FACTS

FACTS


# Weights are approximate and in some case may be calculated. Weights shown do not include bushing.

Dimensions shown are for reference purposes only and are subject to change without notice. Where space requirements are critical contact Drive Components for certified specifications.

A-b combinAtion groove Qd sheAves1 GRooVe f = 1"

PaRT no lisT PRiCe DaTUM Dia* oUTsiDeDia

QD bUsHinG DiMensions WT (lbs)a(4l)

belTsb(5l)belTs

siZe lisT PRiCe TYPe K l

1b34sH $26.00 3.00 3.40 3.75 sH $15.00 D-1 0 1 5/16 1.41b36sH $27.00 3.20 3.60 3.95 sH $15.00 D-1 0 1 5/16 1.61b38sH $28.00 3.40 3.80 4.15 sH $15.00 D-1 0 1 5/16 1.71b40sH $29.00 3.60 4.00 4.35 sH $15.00 C-1 1/16 1 5/16 1.91b42sH $30.00 3.80 4.20 4.55 sH $15.00 C-1 1/16 1 5/16 2.21b44sH $31.00 4.00 4.40 4.75 sH $15.00 C-1 1/16 1 5/16 2.51b46sDs $32.00 4.20 4.60 4.95 sDs $17.00 C-1 1/8 1 5/16 2.51b48sDs $33.00 4.40 4.80 5.15 sDs $17.00 C-1 1/8 1 5/16 2.81b50sDs $34.00 4.60 5.00 5.35 sDs $17.00 C-1 1/8 1 5/16 3.11b52sDs $35.00 4.80 5.20 5.55 sDs $17.00 C-1 1/8 1 5/16 3.31b54sDs $36.00 5.00 5.40 5.75 sDs $17.00 C-1 1/8 1 5/16 3.71b56sDs $37.00 5.20 5.60 5.95 sDs $17.00 C-1 1/8 1 5/16 4.21b58sDs $38.00 5.40 5.80 6.15 sDs $17.00 C-1 1/8 1 5/16 3.91b60sDs $40.00 5.60 6.00 6.35 sDs $17.00 C-2 1/8 1 5/16 4.01b62sDs $42.00 5.80 6.20 6.55 sDs $17.00 C-2 1/8 1 5/16 4.21b64sDs $44.00 6.00 6.40 6.75 sDs $17.00 C-2 1/8 1 5/16 4.31b66sDs $48.00 6.20 6.60 6.95 sDs $17.00 C-2 1/4 1 5/16 5.11b68sDs $50.00 6.40 6.80 7.15 sDs $17.00 C-2 1/4 1 5/16 5.31b70sDs $52.00 6.60 7.00 7.35 sDs $17.00 C-2 1/4 1 5/16 5.61b74sDs $56.00 7.00 7.40 7.75 sDs $17.00 C-2 1/4 1 5/16 6.01b80sDs $58.00 7.60 8.00 8.35 sDs $17.00 C-2 1/4 1 5/16 6.61b86sDs $62.00 8.20 8.60 8.95 sDs $17.00 C-3 1/4 1 5/16 6.81b90sDs $63.00 8.60 9.00 9.35 sDs $17.00 C-3 1/4 1 5/16 7.01b94sDs $64.00 9.00 9.40 9.75 sDs $17.00 C-3 1/4 1 5/16 7.41b110sDs $76.00 10.60 11.00 11.35 sDs $17.00 C-3 1/4 1 5/16 10.51b124sDs $90.00 12.00 12.40 12.75 sDs $17.00 C-3 1/4 1 5/16 11.51b136sDs $95.00 13.20 13.60 13.95 sDs $17.00 C-3 1/4 1 5/16 12.91b154sK $113.00 15.00 15.40 15.75 sK $27.00 f-3 1/4 1 15/16 17.11b160sK $133.00 15.60 16.00 16.35 sK $27.00 f-3 1/4 1 15/16 18.61b184sK $152.00 18.00 18.40 18.75 sK $27.00 f-3 1/4 1 15/16 23.81b200sK $225.00 19.60 20.00 20.35 sK $27.00 f-3 1/4 1 15/16 27.01b250sf $360.00 24.60 25.00 25.35 sf $33.00 f-3 1/4 1 1/4 39.01b300sf $430.00 29.60 30.00 30.35 sf $33.00 f-3 1/4 1 1/4 57.0

TYPE C

F

K

LOD PD

TYPE D

FK

L

OD PD

TYPE F

FK

L

OD PD

1 = solid2 = Web3 = arm

* Pitch Diameter• AllDimensionsareininches




A-b combinAtion groove Qd sheAves2 GRooVe f = 1 3/4"



belTsb(5l)belTs


2b34sH $38.00 3.00 3.40 3.75 sH $15.00 e-1 0 1 5/16 2.42b36sH $40.00 3.20 3.60 3.95 sH $15.00 D-1 3/16 1 5/16 2.72b38sH $42.00 3.40 3.80 4.15 sH $15.00 D-1 3/16 1 5/16 2.92b40sH $44.00 3.60 4.00 4.35 sH $15.00 a-1 11/16 1 5/16 3.22b42sH $46.00 3.80 4.20 4.55 sH $15.00 a-1 11/16 1 5/16 3.72b44sH $48.00 4.00 4.40 4.75 sH $15.00 a-1 11/16 1 5/16 4.12b46sDs $50.00 4.20 4.60 4.95 sDs $17.00 a-1 11/16 1 5/16 4.22b48sDs $52.00 4.40 4.80 5.15 sDs $17.00 a-1 11/16 1 5/16 4.62b50sDs $54.00 4.60 5.00 5.35 sDs $17.00 a-1 11/16 1 5/16 5.02b52sDs $56.00 4.80 5.20 5.55 sDs $17.00 a-1 11/16 1 5/16 5.42b54sDs $58.00 5.00 5.40 5.75 sDs $17.00 a-1 11/16 1 5/16 5.82b56sDs $60.00 5.20 5.60 5.95 sDs $17.00 a-1 11/16 1 5/16 6.12b58sDs $62.00 5.40 5.80 6.15 sDs $17.00 a-1 11/16 1 5/16 6.12b60sDs $64.00 5.60 6.00 6.35 sDs $17.00 a-2 11/16 1 5/16 6.42b62sDs $66.00 5.80 6.20 6.55 sDs $17.00 a-2 11/16 1 5/16 6.72b64sDs $68.00 6.00 6.40 6.75 sDs $17.00 a-2 11/16 1 5/16 7.12b66sDs $69.00 6.20 6.60 6.95 sDs $17.00 a-2 11/16 1 5/16 7.62b68sDs $70.00 6.40 6.80 7.15 sDs $17.00 a-2 11/16 1 5/16 7.82b70sK $72.00 6.60 7.00 7.35 sK $27.00 D-2 7/16 1 15/16 9.52b74sK $73.00 7.00 7.40 7.75 sK $27.00 D-2 7/16 1 15/16 10.22b80sK $74.00 7.60 8.00 8.35 sK $27.00 D-2 7/16 1 15/16 10.82b86sK $76.00 8.20 8.60 8.95 sK $27.00 D-3 7/16 1 15/16 11.72b90sK $77.00 8.60 9.00 9.35 sK $27.00 D-3 7/16 1 15/16 13.02b94sK $78.00 9.00 9.40 9.75 sK $27.00 D-3 7/16 1 15/16 13.22b110sK $91.00 10.60 11.00 11.35 sK $27.00 D-3 7/16 1 15/16 16.42b124sK $99.00 12.00 12.40 12.75 sK $27.00 D-3 7/16 1 15/16 18.32b136sK $119.00 13.20 13.60 13.95 sK $27.00 D-3 7/16 1 15/16 20.32b154sK $167.00 15.00 15.40 15.75 sK $27.00 D-3 7/16 1 15/16 23.82b160sK $177.00 15.60 16.00 16.35 sK $27.00 D-3 7/16 1 15/16 24.32b184sK $223.00 18.00 18.40 18.75 sK $27.00 D-3 7/16 1 15/16 31.82b200sf $259.00 19.60 20.00 20.35 sf $33.00 D-3 3/8 2 1/16 33.42b250sf $394.00 24.60 25.00 25.35 sf $33.00 D-3 3/8 2 1/16 45.02b300sf $438.00 29.60 30.00 30.35 sf $33.00 D-3 3/8 2 1/16 71.22b380sf $835.00 37.60 38.00 38.35 sf $33.00 D-3 3/8 2 1/16 103.0

TYPE A

F

K

LOD

PD

TYPE D

FK

L

OD PD

TYPE E

F K

LOD PD









belTsb(5l)belTs


3b34sH $44.00 3.00 3.40 3.75 sH $15.00 e-1 0 1 5/16 3.33b36sH $46.00 3.20 3.60 3.95 sH $15.00 D-1 3/16 1 5/16 3.63b38sH $48.00 3.40 3.80 4.15 sH $15.00 D-1 3/16 1 5/16 3.83b40sH $50.00 3.60 4.00 4.35 sH $15.00 a-1 1 1/16 1 5/16 4.23b42sH $52.00 3.80 4.20 4.55 sH $15.00 a-1 1 1/16 1 5/16 4.83b44sH $54.00 4.00 4.40 4.75 sH $15.00 a-1 1 1/16 1 5/16 5.33b46sD $56.00 4.20 4.60 4.95 sD $21.00 a-1 1 1/16 1 13/16 6.03b48sD $58.00 4.40 4.80 5.15 sD $21.00 a-1 1 1/16 1 13/16 6.53b50sD $60.00 4.60 5.00 5.35 sD $21.00 a-1 1 1/16 1 13/16 7.23b52sD $62.00 4.80 5.20 5.55 sD $21.00 a-1 1 1/16 1 13/16 7.83b54sD $64.00 5.00 5.40 5.75 sD $21.00 a-1 1 1/16 1 13/16 8.43b56sD $66.00 5.20 5.60 5.95 sD $21.00 a-1 1 1/16 1 13/16 9.03b58sD $68.00 5.40 5.80 6.15 sD $21.00 a-1 1 1/16 1 13/16 9.73b60sD $70.00 5.60 6.00 6.35 sD $21.00 a-1 1 1/16 1 13/16 8.93b62sD $72.00 5.80 6.20 6.55 sD $21.00 a-2 1 1/16 1 13/16 9.43b64sD $76.00 6.00 6.40 6.75 sD $21.00 a-2 1 1/16 1 13/16 9.73b66sD $78.00 6.20 6.60 6.95 sD $21.00 a-2 1 1/16 1 13/16 10.03b68sD $80.00 6.40 6.80 7.15 sD $21.00 a-2 1 1/16 1 13/16 11.13b70sK $82.00 6.60 7.00 7.35 sK $27.00 a-2 11/16 1 15/16 11.43b74sK $84.00 7.00 7.40 7.75 sK $27.00 a-2 11/16 1 15/16 12.53b80sK $88.00 7.60 8.00 8.35 sK $27.00 a-2 11/16 1 15/16 13.63b86sK $95.00 8.20 8.60 8.95 sK $27.00 a-3 11/16 1 15/16 14.63b90sK $100.00 8.60 9.00 9.35 sK $27.00 a-3 11/16 1 15/16 15.93b94sK $103.00 9.00 9.40 9.75 sK $27.00 a-3 11/16 1 15/16 16.63b110sK $123.00 10.60 11.00 11.35 sK $27.00 a-3 11/16 1 15/16 20.83b124sK $143.00 12.00 12.40 12.75 sK $27.00 a-3 11/16 1 15/16 22.53b136sK $155.00 13.20 13.60 13.95 sK $27.00 a-3 11/16 1 15/16 25.33b154sK $199.00 15.00 15.40 15.75 sK $27.00 a-3 11/16 1 15/16 29.83b160sK $211.00 15.60 16.00 16.35 sK $27.00 a-3 11/16 1 15/16 30.33b184sK $243.00 18.00 18.40 18.75 sK $27.00 a-3 11/16 1 15/16 39.13b200sf $322.00 19.60 20.00 20.35 sf $33.00 D-3 5/8 2 1/16 43.03b250sf $438.00 24.60 25.00 25.35 sf $33.00 D-3 5/8 2 1/16 56.03b300sf $497.00 29.60 30.00 30.35 sf $33.00 D-3 5/8 2 1/16 77.03b380e $876.00 37.60 38.00 38.35 e $69.00 D-3 5/8 2 3/4 115.0

TYPE A

F

K

LOD

PD

TYPE D

FK

L

OD PD

TYPE E

F K

LOD PD









belTsb(5l)belTs


4b34sD $64.00 3.00 3.40 3.75 sD $21.00 e-1 5/16 1 13/16 4.34b36sD $66.00 3.20 3.60 3.95 sD $21.00 e-1 5/16 1 13/16 4.84b38sD $68.00 3.40 3.80 4.15 sD $21.00 e-1 5/16 1 13/16 5.24b40sD $70.00 3.60 4.00 4.35 sD $21.00 e-1 0 1 13/16 5.64b42sD $72.00 3.80 4.20 4.55 sD $21.00 e-1 0 1 13/16 6.24b44sD $74.00 4.00 4.40 4.75 sD $21.00 e-1 0 1 13/16 6.64b46sD $76.00 4.20 4.60 4.95 sD $21.00 a-1 1 5/16 1 13/16 7.24b48sD $78.00 4.40 4.80 5.15 sD $21.00 a-1 1 5/16 1 13/16 7.94b50sD $80.00 4.60 5.00 5.35 sD $21.00 a-1 1 5/16 1 13/16 8.44b52sD $82.00 4.80 5.20 5.55 sD $21.00 a-1 1 5/16 1 13/16 9.24b54sD $84.00 5.00 5.40 5.75 sD $21.00 a-1 1 5/16 1 13/16 9.84b56sD $86.00 5.20 5.60 5.95 sD $21.00 a-1 1 5/16 1 13/16 10.74b58sD $88.00 5.40 5.80 6.15 sD $21.00 a-1 1 5/16 1 13/16 11.44b60sD $90.00 5.60 6.00 6.35 sD $21.00 a-1 1 5/16 1 13/16 10.94b62sD $91.00 5.80 6.20 6.55 sD $21.00 a-2 1 5/16 1 13/16 11.34b64sD $95.00 6.00 6.40 6.75 sD $21.00 a-2 1 5/16 1 13/16 11.74b66sD $99.00 6.20 6.60 6.95 sD $21.00 a-2 1 5/16 1 13/16 12.24b68sD $103.00 6.40 6.80 7.15 sD $21.00 a-2 1 5/16 1 13/16 13.04b70sK $107.00 6.60 7.00 7.35 sK $27.00 a-2 1 1 15/16 13.74b74sK $111.00 7.00 7.40 7.75 sK $27.00 a-2 1 1 15/16 14.84b80sK $115.00 7.60 8.00 8.35 sK $27.00 a-2 1 1 15/16 16.34b86sK $123.00 8.20 8.60 8.95 sK $27.00 a-3 1 1 15/16 17.74b90sK $130.00 8.60 9.00 9.35 sK $27.00 a-3 1 1 15/16 19.04b94sK $137.00 9.00 9.40 9.75 sK $27.00 a-3 1 1 15/16 19.74b110sK $151.00 10.60 11.00 11.35 sK $27.00 a-3 1 1 15/16 25.24b124sK $169.00 12.00 12.40 12.75 sK $27.00 a-3 1 1 15/16 28.44b136sK $203.00 13.20 13.60 13.95 sK $27.00 a-3 1 1 15/16 31.34b154sf $223.00 15.00 15.40 15.75 sf $33.00 a-3 1 2 1/16 37.64b160sf $243.00 15.60 16.00 16.35 sf $33.00 a-3 1 2 1/16 38.64b184sf $259.00 18.00 18.40 18.75 sf $33.00 a-3 1 2 1/16 45.24b200sf $362.00 19.60 20.00 20.35 sf $33.00 a-3 1 2 1/16 52.04b250e $477.00 24.60 25.00 25.35 e $69.00 a-3 1 2 3/4 72.04b300e $557.00 29.60 30.00 30.35 e $69.00 a-3 1 2 3/4 97.04b380e $975.00 37.60 38.00 38.35 e $69.00 a-3 1 2 3/4 151.1

TYPE A

F

K

LOD

PD

TYPE E

F K

LOD PD






A-b combinAtion groove Qd sheAves5 GRooVe f = 4"



belTsb(5l)belTs


5b34sD $74.00 3.00 3.40 3.75 sD $21.00 e-1 5/16 1 13/16 5.25b36sD $76.00 3.20 3.60 3.95 sD $21.00 e-1 5/16 1 13/16 5.75b38sD $78.00 3.40 3.80 4.15 sD $21.00 e-1 5/16 1 13/16 6.25b40sD $80.00 3.60 4.00 4.35 sD $21.00 e-1 0 1 13/16 6.55b42sD $82.00 3.80 4.20 4.55 sD $21.00 e-1 0 1 13/16 7.15b44sD $84.00 4.00 4.40 4.75 sD $21.00 e-1 0 1 13/16 7.85b46sD $86.00 4.20 4.60 4.95 sD $21.00 a-1 1 5/16 1 13/16 8.55b48sD $90.00 4.40 4.80 5.15 sD $21.00 a-1 1 5/16 1 13/16 9.25b50sD $91.00 4.60 5.00 5.35 sD $21.00 a-1 1 5/16 1 13/16 9.95b52sD $94.00 4.80 5.20 5.55 sD $21.00 a-1 1 5/16 1 13/16 10.95b54sK $95.00 5.00 5.40 5.75 sK $27.00 a-1 1 5/16 1 15/16 10.55b56sK $98.00 5.20 5.60 5.95 sK $27.00 a-1 1 5/16 1 15/16 11.45b58sK $99.00 5.40 5.80 6.15 sK $27.00 a-1 1 5/16 1 15/16 12.35b60sK $105.00 5.60 6.00 6.35 sK $27.00 a-1 1 5/16 1 15/16 12.85b62sK $111.00 5.80 6.20 6.55 sK $27.00 a-1 1 5/16 1 15/16 13.65b64sK $115.00 6.00 6.40 6.75 sK $27.00 a-1 1 5/16 1 15/16 14.65b66sK $119.00 6.20 6.60 6.95 sK $27.00 a-1 1 5/16 1 15/16 15.95b68sK $123.00 6.40 6.80 7.15 sK $27.00 a-1 1 5/16 1 15/16 16.75b70sf $131.00 6.60 7.00 7.35 sf $33.00 a-1 1 5/16 2 1/16 17.15b74sf $149.00 7.00 7.40 7.75 sf $33.00 a-1 1 5/16 2 1/16 18.75b80sf $153.00 7.60 8.00 8.35 sf $33.00 a-2 1 5/16 2 1/16 19.35b86sf $163.00 8.20 8.60 8.95 sf $33.00 a-2 1 5/16 2 1/16 21.65b94sf $171.00 9.00 9.40 9.75 sf $33.00 a-2 1 5/16 2 1/16 24.05b110sf $193.00 10.60 11.00 11.35 sf $33.00 a-3 1 5/16 2 1/16 28.75b124sf $207.00 12.00 12.40 12.75 sf $33.00 a-3 1 5/16 2 1/16 33.85b136sf $239.00 13.20 13.60 13.95 sf $33.00 a-3 1 5/16 2 1/16 37.05b154sf $267.00 15.00 15.40 15.75 sf $33.00 a-3 1 5/16 2 1/16 43.05b160sf $292.00 15.60 16.00 16.35 sf $33.00 a-3 1 5/16 2 1/16 48.05b184sf $314.00 18.00 18.40 18.75 sf $33.00 a-3 1 5/16 2 1/16 51.85b200e $388.00 19.60 20.00 20.35 e $69.00 a-3 1 1/4 2 3/4 62.05b250e $497.00 24.60 25.00 25.35 e $69.00 a-3 1 1/4 2 3/4 85.05b300e $692.00 29.60 30.00 30.35 e $69.00 a-3 1 1/4 2 3/4 85.05b380e $1,074.00 37.60 38.00 38.35 e $69.00 a-3 1 1/4 2 3/4 159.0

TYPE A

F

K

LOD

PD

TYPE E

F K

LOD PD









belTsb(5l)belTs


6b34sD $98.00 3.00 3.40 3.75 sD $21.00 e-1 5/16 1 13/16 5.86b36sD $99.00 3.20 3.60 3.95 sD $21.00 e-1 5/16 1 13/16 6.86b38sD $101.00 3.40 3.80 4.15 sD $21.00 e-1 5/16 1 13/16 7.16b40sD $103.00 3.60 4.00 4.35 sD $21.00 e-1 0 1 13/16 7.76b42sD $105.00 3.80 4.20 4.55 sD $21.00 e-1 0 1 13/16 8.66b44sD $109.00 4.00 4.40 4.75 sD $21.00 e-1 0 1 13/16 9.36b46sD $111.00 4.20 4.60 4.95 sD $21.00 a-1 1 3/16 1 13/16 9.86b48sD $113.00 4.40 4.80 5.15 sD $21.00 a-1 1 3/16 1 13/16 10.86b50sD $115.00 4.60 5.00 5.35 sD $21.00 a-1 1 3/16 1 13/16 11.06b52sD $117.00 4.80 5.20 5.55 sD $21.00 a-1 1 3/16 1 13/16 12.06b54sK $119.00 5.00 5.40 5.75 sK $27.00 a-1 1 5/16 1 15/16 12.56b56sK $121.00 5.20 5.60 5.95 sK $27.00 a-1 1 5/16 1 15/16 13.36b58sK $123.00 5.40 5.80 6.15 sK $27.00 a-1 1 5/16 1 15/16 14.16b60sK $125.00 5.60 6.00 6.35 sK $27.00 a-1 1 5/16 1 15/16 15.46b62sK $129.00 5.80 6.20 6.55 sK $27.00 a-1 1 5/16 1 15/16 16.46b64sK $133.00 6.00 6.40 6.75 sK $27.00 a-1 1 5/16 1 15/16 17.36b66sK $138.00 6.20 6.60 6.95 sK $27.00 a-1 1 5/16 1 15/16 17.96b68sK $141.00 6.40 6.80 7.15 sK $27.00 a-1 1 5/16 1 15/16 19.36b70sf $149.00 6.60 7.00 7.35 sf $33.00 a-1 1 11/16 2 1/16 19.86b74sf $203.00 7.00 7.40 7.75 sf $33.00 a-2 1 11/16 2 1/16 22.46b80sf $207.00 7.60 8.00 8.35 sf $33.00 a-2 1 11/16 2 1/16 25.46b86sf $219.00 8.20 8.60 8.95 sf $33.00 a-2 1 11/16 2 1/16 25.76b94sf $229.00 9.00 9.40 9.75 sf $33.00 a-2 1 11/16 2 1/16 27.96b110sf $247.00 10.60 11.00 11.35 sf $33.00 a-3 1 11/16 2 1/16 33.16b124sf $274.00 12.00 12.40 12.75 sf $33.00 a-3 1 11/16 2 1/16 37.56b136sf $278.00 13.20 13.60 13.95 sf $33.00 a-3 1 11/16 2 1/16 42.06b154sf $298.00 15.00 15.40 15.75 sf $33.00 a-3 1 11/16 2 1/16 49.06b160sf $326.00 15.60 16.00 16.35 sf $33.00 a-3 1 11/16 2 1/16 48.86b184sf $346.00 18.00 18.40 18.75 sf $33.00 a-3 1 11/16 2 1/16 60.06b200sf $462.00 19.60 20.00 20.35 e $69.00 a-3 1 3/8 2 3/4 72.06b250sf $577.00 24.60 25.00 25.35 e $69.00 a-3 1 3/8 2 3/4 94.06b300sf $776.00 29.60 30.00 30.35 e $69.00 a-3 1 3/8 2 3/4 131.06b380sf $1,094.00 37.60 38.00 38.35 e $69.00 a-3 1 3/8 2 3/4 183.0

TYPE A

F

K

LOD

PD

TYPE E

F K

LOD PD









belTsb(5l)belTs


8b54sK $179.00 5.00 5.40 5.70 sK $27.00 a-1 1 13/16 1 15/16 15.58b56sK $183.00 5.20 5.60 5.95 sK $27.00 a-1 1 13/16 1 15/16 16.68b58sK $189.00 5.40 5.80 6.15 sK $27.00 a-1 1 13/16 1 15/16 17.18b60sK $191.00 5.60 6.00 6.35 sK $27.00 a-1 1 13/16 1 15/16 18.78b62sf $199.00 5.80 6.20 6.55 sf $33.00 a-1 1 13/16 2 1/16 19.38b64sf $202.00 6.00 6.40 6.75 sf $33.00 a-1 1 13/16 2 1/16 20.38b66sf $205.00 6.20 6.60 6.95 sf $33.00 a-1 1 13/16 2 1/16 21.38b68sf $211.00 6.40 6.80 7.15 sf $33.00 a-1 1 13/16 2 1/16 22.98b70sf $268.00 6.60 7.00 7.35 sf $33.00 a-1 1 13/16 2 1/16 24.78b74sf $282.00 7.00 7.40 7.75 sf $33.00 a-1 1 13/16 2 1/16 26.58b86e $290.00 8.20 8.60 8.95 e $69.00 a-1 2 3/8 2 3/4 35.38b94e $298.00 9.00 9.40 9.75 e $69.00 a-1 2 3/8 2 3/4 41.98b110e $354.00 10.60 11.00 11.35 e $69.00 a-2 2 3/8 2 3/4 44.98b124e $370.00 12.00 12.40 12.75 e $69.00 a-3 2 3/8 2 3/4 52.08b136e $453.00 13.20 13.60 13.95 e $69.00 a-3 2 3/8 2 3/4 55.08b154e $529.00 15.00 15.40 15.75 e $69.00 a-3 2 3/8 2 3/4 61.08b160e $582.00 15.60 16.00 16.35 e $69.00 a-3 2 3/8 2 3/4 64.08b184f $633.00 18.00 18.40 18.75 f $123.00 a-3 1 5/16 3 3/4 82.08b200f $686.00 19.60 20.00 20.35 f $123.00 a-3 1 5/16 3 3/4 93.08b250f $875.00 24.60 25.00 25.35 f $123.00 a-3 1 5/16 3 3/4 116.08b300f $1,273.00 29.60 30.00 30.35 f $123.00 a-3 1 5/16 3 3/4 157.08b380f $1,731.00 37.60 38.00 38.35 f $123.00 a-3 1 5/16 3 3/4 216.0

TYPE A

F

K

LOD

PD


typicAl nomenclAture seQuence For combinAtion groove A-b Qd sheAves

8 b 54 sk

number of Grooves

belt Cross section

Datum* Diameter in inches for “b” belt (5.40")

QD bushing








belTsb(5l)belTs


10b54sK $283.00 5.00 5.40 5.75 sK $27.00 a-1 2 9/16 1 15/16 18.510b56sK $291.00 5.20 5.60 5.95 sK $27.00 a-1 2 9/16 1 15/16 19.810b58sK $299.00 5.40 5.80 6.15 sK $27.00 a-1 2 9/16 1 15/16 21.210b60sK $307.00 5.60 6.00 6.35 sK $27.00 a-1 2 9/16 1 15/16 22.310b62sf $315.00 5.80 6.20 6.55 sf $33.00 a-1 2 9/16 2 1/16 22.810b64sf $323.00 6.00 6.40 6.75 sf $33.00 a-1 2 9/16 2 1/16 24.210b66sf $335.00 6.20 6.60 6.95 sf $33.00 a-1 2 9/16 2 1/16 25.610b68sf $347.00 6.40 6.80 7.15 sf $33.00 a-1 2 9/16 2 1/16 26.810b70sf $355.00 6.60 7.00 7.35 sf $33.00 a-1 2 9/16 2 1/16 28.310b74sf $366.00 7.00 7.40 7.75 sf $33.00 a-1 2 9/16 2 1/16 31.410b86e $375.00 8.20 8.60 8.95 e $69.00 a-1 3 1/8 2 3/4 41.010b94e $424.00 9.00 9.40 9.75 e $69.00 a-2 3 1/8 2 3/4 47.810b110e $525.00 10.60 11.00 11.35 e $69.00 a-2 3 1/8 2 3/4 58.010b124e $537.00 12.00 12.40 12.75 e $69.00 a-3 3 1/8 2 3/4 65.010b136f $642.00 13.20 13.60 13.95 f $123.00 a-3 2 1/16 3 3/4 80.010b154f $686.00 15.00 15.40 15.75 f $123.00 a-3 2 1/16 3 3/4 87.010b160f $767.00 15.60 16.00 16.35 f $123.00 a-3 2 1/16 3 3/4 89.010b184f $807.00 18.00 18.40 18.75 f $123.00 a-3 2 1/16 3 3/4 102.010b200f $868.00 19.60 20.00 20.35 f $123.00 a-3 2 1/16 3 3/4 112.010b250f $1,171.00 24.60 25.00 25.35 f $123.00 a-3 2 1/16 3 3/4 148.010b300f $1,393.00 29.60 30.00 30.35 f $123.00 a-3 2 1/16 3 3/4 188.010b380J $1,797.00 37.60 38.00 38.35 J $153.00 a-3 1 9/16 4 5/8 291.0

TYPE A

F

K

LOD

PD



sheaves wear even though they are metal. To insure optimum operating efficiency from your drives, check both Driver and Driven sheaves periodically for signs of “dishing” and replace one or both when the sidewall degradation is 1/32" or greater (fig. 1).

FACTS

Fig. 1

Worn Groove Sidewalls

Dishing




c section Qd sheAves1 GRooVe f = 1 3/8"

PaRT no lisT PRiCe DaTUM Dia* oD QD bUsHinG DiMensions WT (lbs)siZe lisT PRiCe TYPe K l

1C60sK $114.00 6.00 6.4 sK $27.00 C-1 1/8 1 5/16 8.71C70sf $116.00 7.00 7.4 sf $33.00 C-1 1/8 2 1/16 9.71C75sf $119.00 7.50 7.9 sf $33.00 C-1 1/8 2 1/16 11.41C80sf $123.00 8.00 8.4 sf $33.00 C-1 1/8 2 1/16 13.01C85sf $127.00 8.50 8.9 sf $33.00 C-2 1/8 2 1/16 12.61C90sf $131.00 9.00 9.4 sf $33.00 C-2 1/8 2 1/16 12.81C95sf $135.00 9.50 9.9 sf $33.00 C-2 1/8 2 1/16 13.31C100sf $139.00 10.00 10.4 sf $33.00 C-2 1/8 2 1/16 14.21C105sf $151.00 10.50 10.9 sf $33.00 C-3 1/8 2 1/16 15.21C110sf $171.00 11.00 11.4 sf $33.00 C-3 1/8 2 1/16 16.21C120sf $183.00 12.00 12.4 sf $33.00 C-3 1/8 2 1/16 18.61C130sf $239.00 13.00 13.4 sf $33.00 C-3 1/8 2 1/16 19.11C140sf $259.00 14.00 14.4 sf $33.00 C-3 1/8 2 1/16 20.31C150sf $282.00 15.00 15.4 sf $33.00 C-3 1/8 2 1/16 22.01C160sf $278.00 16.00 16.4 sf $33.00 C-3 1/8 2 1/16 23.51C180sf $298.00 18.00 18.4 sf $33.00 C-3 1/8 2 1/16 27.81C200sf $318.00 20.00 20.4 sf $33.00 C-3 1/8 2 1/16 31.81C240sf $358.00 24.00 24.4 sf $33.00 C-3 1/8 2 1/16 41.2


TYPE C

F

K

LOD PD

typicAl nomenclAture seQuence For c section Qd sheAves

1 c 80 F

number of Grooves

belt Cross section

Datum* Diameter in inches (8.00")

QD bushing







2C60sf $121.00 6.00 6.40 sf $33.00 a-1 7/8 1 15/16 11.42C70sf $126.00 7.00 7.40 sf $33.00 a-1 13/16 2 1/16 12.42C75sf $130.00 7.50 7.90 sf $33.00 a-1 13/16 2 1/16 14.42C80sf $143.00 8.00 8.40 sf $33.00 a-1 13/16 2 1/16 16.32C85sf $146.00 8.50 8.90 sf $33.00 a-2 13/16 2 1/16 16.62C90sf $154.00 9.00 9.40 sf $33.00 a-2 13/16 2 1/16 17.32C95sf $165.00 9.50 9.90 sf $33.00 a-2 13/16 2 1/16 18.12C100sf $174.00 10.00 10.40 sf $33.00 a-2 13/16 2 1/16 19.42C105sf $187.00 10.50 10.90 sf $33.00 a-3 13/16 2 1/16 20.62C110sf $203.00 11.00 11.40 sf $33.00 a-3 13/16 2 1/16 22.02C120sf $209.00 12.00 12.40 sf $33.00 D-3 9/16 2 1/16 24.22C130sf $247.00 13.00 13.40 sf $33.00 D-3 9/16 2 1/16 27.82C140sf $261.00 14.00 14.40 sf $33.00 D-3 9/16 2 1/16 30.12C150sf $278.00 15.00 15.40 sf $33.00 D-3 9/16 2 1/16 32.02C160sf $288.00 16.00 16.40 sf $33.00 D-3 9/16 2 1/16 34.92C180sf $308.00 18.00 18.40 sf $33.00 D-3 9/16 2 1/16 40.92C200sf $338.00 20.00 20.40 sf $33.00 D-3 9/16 2 1/16 42.12C240sf $449.00 24.00 24.40 sf $33.00 D-3 9/16 2 1/16 56.72C270f $552.00 27.00 27.40 f $123.00 f-3 1/8 3 3/4 79.42C300f $618.00 30.00 30.40 f $123.00 f-3 1/8 3 3/4 82.4


TYPE A

F

K

LOD

PD

TYPE D

FK

L

OD PD

TYPE F

FK

L

OD PD

Drive Components reserves the right to modify, improve, and/or enhance product design, specifications, dimensions and materials at any time without obligation for replacement or refund on any product or parts thereof which may be in any customers possession at the time such changes become effective.


FACTS






3C50sD $135.00 5.00 5.40 sD $21.00 a-1 1 1/4 1 13/16 8.43C54sD $137.00 5.40 5.80 sD $21.00 a-1 1 5/16 1 13/16 10.43C55sD $139.00 5.50 5.90 sD $21.00 a-1 1 5/16 1 13/16 10.93C56sD $142.00 5.60 6.00 sD $21.00 a-1 1 5/16 1 13/16 11.23C60sf $143.00 6.00 6.40 sf $33.00 a-1 7/8 1 15/16 10.13C70sf $144.00 7.00 7.40 sf $33.00 a-1 1 5/16 2 1/16 15.93C75sf $147.00 7.50 7.90 sf $33.00 a-1 1 5/16 2 1/16 18.03C80e $155.00 8.00 8.40 e $69.00 b-1 1 3/4 2 3/4 20.93C85e $175.00 8.50 8.90 e $69.00 b-1 1 3/4 2 3/4 24.53C90e $187.00 9.00 9.40 e $69.00 b-1 1 3/4 2 3/4 27.13C95e $199.00 9.50 9.90 e $69.00 b-1 1 3/4 2 3/4 29.13C100e $219.00 10.00 10.40 e $69.00 b-2 1 3/4 2 3/4 30.13C105e $229.00 10.50 10.90 e $69.00 b-2 1 3/4 2 3/4 30.83C110e $239.00 11.00 11.40 e $69.00 b-3 1 3/4 2 3/4 32.93C120e $249.00 12.00 12.40 e $69.00 b-3 1 3/4 2 3/4 38.43C130e $288.00 13.00 13.40 e $69.00 b-3 1 3/4 2 3/4 42.43C140e $318.00 14.00 14.40 e $69.00 b-3 1 3/4 2 3/4 41.73C150e $324.00 15.00 15.40 e $69.00 b-3 1 3/4 2 3/4 45.03C160e $328.00 16.00 16.40 e $69.00 b-3 1 3/4 2 3/4 49.83C180e $348.00 18.00 18.40 e $69.00 b-3 1 3/4 2 3/4 58.63C200e $398.00 20.00 20.40 e $69.00 a-3 1 2 3/4 62.63C240e $477.00 24.00 24.40 e $69.00 a-3 1 2 3/4 78.73C270f $577.00 27.00 27.40 f $123.00 C-3 7/8 3 3/4 103.03C300f $637.00 30.00 30.40 f $123.00 C-3 7/8 3 3/4 115.43C360f $975.00 36.00 36.40 f $123.00 C-3 7/8 3 3/4 161.73C440f $1,740.00 44.00 44.40 f $123.00 C-3 13/16 3 3/4 242.83C500f $1,943.00 50.00 50.40 f $123.00 C-3 13/16 3 3/4 275.0


TYPE A

F

K

LOD

PD

TYPE B

F

K

LOD PD

TYPE C

F

K

LOD PD







4C50sD $151.00 5.00 5.40 sD $21.00 a-1 1 1/4 1 13/16 10.24C54sD $152.00 5.40 5.80 sD $21.00 a-1 1 5/16 1 13/16 11.84C55sD $153.00 5.50 5.90 sD $21.00 a-1 1 5/16 1 13/16 13.54C56sD $158.00 5.60 6.00 sD $21.00 a-1 1 5/16 1 13/16 13.94C60sf $160.00 6.00 6.40 sf $33.00 a-1 7/8 1 15/16 12.04C70sf $165.00 7.00 7.40 sf $33.00 a-1 1 9/16 2 1/16 18.04C75sf $168.00 7.50 7.90 sf $33.00 a-1 1 9/16 2 1/16 20.54C80e $190.00 8.00 8.40 e $69.00 a-1 2 2 3/4 24.04C85e $208.00 8.50 8.90 e $69.00 a-1 2 2 3/4 27.34C90e $224.00 9.00 9.40 e $69.00 a-1 2 2 3/4 30.74C95e $222.00 9.50 9.90 e $69.00 a-1 2 2 3/4 34.94C100e $235.00 10.00 10.40 e $69.00 a-2 2 2 3/4 38.14C105e $250.00 10.50 10.90 e $69.00 a-2 2 2 3/4 35.84C110e $272.00 11.00 11.40 e $69.00 a-3 2 2 3/4 38.44C120e $294.00 12.00 12.40 e $69.00 a-3 2 2 3/4 43.64C130e $331.00 13.00 13.40 e $69.00 a-3 2 2 3/4 49.44C140e $335.00 14.00 14.40 e $69.00 a-3 2 2 3/4 50.74C150e $374.00 15.00 15.40 e $69.00 a-3 2 2 3/4 52.04C160e $418.00 16.00 16.40 e $69.00 a-3 2 2 3/4 60.24C180e $430.00 18.00 18.40 e $69.00 a-3 2 2 3/4 68.64C200e $454.00 20.00 20.40 e $69.00 a-3 1 1/2 2 3/4 76.9

4C240f $567.00 24.00 24.40 f $123.00 a-3 1 5/16 3 3/4 100.44C270f $656.00 27.00 27.40 f $123.00 a-3 1 5/16 3 3/4 116.84C300f $745.00 30.00 30.40 f $123.00 a-3 1 5/16 3 3/4 136.14C360f $1,093.00 36.00 36.40 f $123.00 a-3 1 5/16 3 3/4 194.24C440J $1,748.00 44.00 44.40 J $153.00 a-3 1 9/16 4 5/8 270.44C500J $2,059.00 50.00 50.40 J $153.00 a-3 1 9/16 4 5/8 337.4


TYPE A

F

K

LOD

PD* Pitch Diameter• AllDimensionsareininches






5C60sf $173.00 6.00 6.40 sf $33.00 a-1 7/8 1 15/16 12.55C70sf $175.00 7.00 7.40 sf $33.00 a-1 1 15/16 2 1/16 20.85C75sf $223.00 7.50 7.90 sf $33.00 a-1 1 15/16 2 1/16 23.65C80e $235.00 8.00 8.40 e $69.00 a-1 2 3/8 2 3/4 27.35C85e $251.00 8.50 8.90 e $69.00 a-1 2 3/8 2 3/4 30.85C90e $255.00 9.00 9.40 e $69.00 a-1 2 3/8 2 3/4 34.55C95e $271.00 9.50 9.90 e $69.00 a-1 2 3/8 2 3/4 39.15C100e $274.00 10.00 10.40 e $69.00 a-2 2 3/8 2 3/4 42.45C105e $294.00 10.50 10.90 e $69.00 a-2 2 3/8 2 3/4 40.45C110e $330.00 11.00 11.40 e $69.00 a-3 2 3/8 2 3/4 43.15C120e $334.00 12.00 12.40 e $69.00 a-3 2 3/8 2 3/4 48.85C130e $374.00 13.00 13.40 e $69.00 a-3 2 3/8 2 3/4 55.15C140e $378.00 14.00 14.40 e $69.00 a-3 2 3/8 2 3/4 57.25C150e $400.00 15.00 15.40 e $69.00 a-3 2 3/8 2 3/4 68.25C160e $428.00 16.00 16.40 e $69.00 a-3 2 3/8 2 3/4 71.25C180e $477.00 18.00 18.40 e $69.00 a-3 2 3/8 2 3/4 79.15C200f $597.00 20.00 20.40 f $123.00 a-3 1 5/16 3 3/4 96.55C240f $637.00 24.00 24.40 f $123.00 a-3 1 5/16 3 3/4 106.75C270f $756.00 27.00 27.40 f $123.00 a-3 1 5/16 3 3/4 129.25C300f $835.00 30.00 30.40 f $123.00 a-3 1 5/16 3 3/4 160.85C360J $1,174.00 36.00 36.40 J $153.00 a-3 1 9/16 4 5/8 220.35C440J $1,884.00 44.00 44.40 J $153.00 a-3 1 9/16 4 5/8 293.25C500J $2,215.00 50.00 50.40 J $153.00 a-3 1 9/16 4 5/8 275.0


TYPE A

F

K

LOD

PD

did you know?The QD design is the most popular and widely used bushing in the industry. The 3/4" taper per foot on diameter has twice the (shaft) gripping force as either of the other two (2) mounting systems–taperlock or dual split taper - when pull-up bolts are torqued to the values shown in the chart on page 50.


FACTS






6C60sf $239.00 6.00 6.40 sf $33.00 a-1 7/8 1 15/16 14.06C70sf $249.00 7.00 7.40 sf $33.00 a-1 1 15/16 2 1/16 23.66C75sf $260.00 7.50 7.90 sf $33.00 a-1 1 15/16 2 1/16 26.66C80e $279.00 8.00 8.40 e $69.00 a-1 2 3/8 2 3/4 30.66C85e $286.00 8.50 8.90 e $69.00 a-1 2 3/8 2 3/4 34.46C90f $291.00 9.00 9.40 f $123.00 a-1 1 7/16 3 3/4 43.06C95f $311.00 9.50 9.90 f $123.00 a-1 1 7/16 3 3/4 49.16C100f $327.00 10.00 10.40 f $123.00 a-1 1 7/16 3 3/4 54.06C105f $338.00 10.50 10.90 f $123.00 a-1 1 7/16 3 3/4 60.06C110f $356.00 11.00 11.40 f $123.00 a-2 1 7/16 3 3/4 66.26C120f $391.00 12.00 12.40 f $123.00 a-2 1 7/16 3 3/4 62.56C130f $445.00 13.00 13.40 f $123.00 a-3 1 7/16 3 3/4 70.06C140f $466.00 14.00 14.40 f $123.00 a-3 1 7/16 3 3/4 73.06C150f $498.00 15.00 15.40 f $123.00 a-3 1 7/16 3 3/4 75.06C160f $508.00 16.00 16.40 f $123.00 a-3 1 7/16 3 3/4 87.76C180f $553.00 18.00 18.40 f $123.00 a-3 1 7/16 3 3/4 98.36C200f $613.00 20.00 20.40 f $123.00 a-3 1 15/16 3 3/4 109.86C240f $724.00 24.00 24.40 f $123.00 a-3 1 15/16 3 3/4 122.16C270J $884.00 27.00 27.40 J $153.00 a-3 1 9/16 4 5/8 158.86C300J $1,028.00 30.00 30.40 J $153.00 a-3 1 9/16 4 5/8 192.86C360J $1,267.00 36.00 36.40 J $153.00 a-3 1 9/16 4 5/8 254.5

6C440J $1,981.00 44.00 44.40 J $153.00 a-3 1 9/16 4 5/8 315.06C500M $2,603.00 50.00 50.40 M $306.00 a-3 1 15/16 6 3/4 325.0


TYPE A

F

K

LOD

PD

did you know?all Drive Components sales representatives are experienced power transmission specialists with a combined total of 150 years in the PT industry. They are problem solvers.


FACTS






8C70sf $326.00 7.00 7.40 sf $33.00 a-1 3 1/8 2 1/16 29.28C80e $388.00 8.00 8.40 e $69.00 a-1 3 1/4 2 3/4 37.38C85e $398.00 8.50 8.90 e $69.00 a-1 3 1/4 2 3/4 41.58C90f $408.00 9.00 9.40 f $123.00 a-1 3 5/16 3 3/4 50.58C95f $418.00 9.50 9.90 f $123.00 a-1 3 5/16 3 3/4 57.68C100f $428.00 10.00 10.40 f $123.00 a-1 3 5/16 3 3/4 62.68C105f $448.00 10.50 10.90 f $123.00 a-1 3 5/16 3 3/4 69.08C110f $477.00 11.00 11.40 f $123.00 a-1 3 5/16 3 3/4 75.68C120f $517.00 12.00 12.40 f $123.00 a-2 3 5/16 3 3/4 72.98C130f $557.00 13.00 13.40 f $123.00 a-2 3 5/16 3 3/4 81.38C140f $647.00 14.00 14.40 f $123.00 a-2 3 5/16 3 3/4 88.08C150f $705.00 15.00 15.40 f $123.00 a-2 3 5/16 3 3/4 105.08C160f $736.00 16.00 16.40 f $123.00 a-3 3 5/16 3 3/4 108.68C180f $855.00 18.00 18.40 f $123.00 a-3 3 5/16 3 3/4 123.38C200J $865.00 20.00 20.40 J $153.00 a-3 1 9/16 4 5/8 146.58C240J $1,061.00 24.00 24.40 J $153.00 a-3 1 9/16 4 5/8 173.48C270J $1,114.00 27.00 27.40 J $153.00 a-3 1 9/16 4 5/8 226.38C300J $1,273.00 30.00 30.40 J $153.00 a-3 1 9/16 4 5/8 240.08C360M $1,591.00 36.00 36.40 M $306.00 a-3 1 15/16 6 3/4 355.38C440M $2,566.00 44.00 44.40 M $306.00 C-3 1 15/16 6 3/4 452.08C500M $2,984.00 50.00 50.40 M $306.00 C-3 1 15/16 6 3/4 546.1


TYPE A

F

K

LOD

PD

TYPE C

F

K

LOD PD

Drive Components has two (2) strategically located distribution centers (ohio and Georgia) to provide time and place utility of product availability on a same day basis as required. shipments will be scheduled from the distribution center closest to the customer.


FACTS






10C80e $447.00 8.00 8.40 e $69.00 a-1 3 1/4 2 3/4 43.910C85e $466.00 8.50 8.90 e $69.00 a-1 3 1/4 2 3/4 48.610C90J $481.00 9.00 9.40 J $153.00 a-1 3 9/16 4 5/8 59.610C95J $497.00 9.50 9.90 J $153.00 a-1 3 9/16 4 5/8 67.810C100J $505.00 10.00 10.40 J $153.00 a-1 3 9/16 4 5/8 74.110C105J $563.00 10.50 10.90 J $153.00 a-1 3 9/16 4 5/8 82.210C110J $583.00 11.00 11.40 J $153.00 a-1 3 9/16 4 5/8 90.610C120J $738.00 12.00 12.40 J $153.00 a-1 3 9/16 4 5/8 108.410C130J $816.00 13.00 13.40 J $153.00 a-2 3 9/16 4 5/8 136.010C140J $874.00 14.00 14.40 J $153.00 a-2 3 9/16 4 5/8 110.810C150J $903.00 15.40 15.00 J $153.00 a-2 3 9/16 3 3/16 127.410C160J $932.00 16.00 16.40 J $153.00 a-3 3 9/16 4 5/8 141.310C180J $1,049.00 18.00 18.40 J $153.00 a-3 3 9/16 4 5/8 148.710C200J $1,088.00 20.00 20.40 J $153.00 a-3 3 9/16 4 5/8 169.710C240M $1,321.00 24.00 24.40 M $306.00 a-3 3 9/16 6 3/4 263.110C300M $1,760.00 0.00 30.40 M $306.00 a-3 1 15/16 6 3/4 332.110C360M $2,520.00 36.00 36.40 M $306.00 a-3 1 15/16 6 3/4 397.510C440M $2,826.00 44.00 44.40 M $306.00 a-3 1 15/16 6 3/4 531.810C500M $3,532.00 50.00 50.40 M $306.00 a-3 1 15/16 6 3/4 600.0


TYPE A

F

K

LOD

PD

Private labeling (packaging) and/or bulk packaging (economy) is available on volume orders of like multiple sizes. Quantities and required delivery time will determine cost. Contact Drive Components for price and delivery.


FACTS




TYPE E

F K

LOD PD

3v section Qd sheAves1 GRooVe f = 11/16"


1/3V220Ja $20.00 2.15 2.20 Ja $11.00 e-1 7/16 1 .71/3V235Ja $21.00 2.30 2.35 Ja $11.00 e-1 7/16 1 .71/3V250Ja $21.00 2.45 2.50 Ja $11.00 e-1 7/16 1 .81/3V265Ja $22.00 2.60 2.65 Ja $11.00 C-1 1/8 1 .61/3V280Ja $23.00 2.75 2.80 Ja $11.00 C-1 1/8 1 .61/3V300Ja $24.00 2.95 3.00 Ja $11.00 C-1 1/8 1 .81/3V315Ja $25.00 3.10 3.15 Ja $11.00 C-1 1/8 1 .91/3V335Ja $26.00 3.30 3.35 Ja $11.00 C-1 1/8 1 1.11/3V365sH $27.00 3.60 3.65 sH $15.00 G-1 1/8 1 5/16 1.31/3V412sH $28.00 4.07 4.12 sH $15.00 G-1 1/8 1 5/16 1.81/3V450sH $30.00 4.45 4.50 sH $15.00 G-1 1/8 1 5/16 2.21/3V475sH $31.00 4.70 4.75 sH $15.00 G-1 1/8 1 5/16 2.11/3V500sH $33.00 4.95 5.00 sH $15.00 G-1 1/8 1 5/16 2.11/3V530sH $35.00 5.25 5.30 sH $15.00 G-2 1/8 1 5/16 3.01/3V560sH $37.00 5.55 5.60 sH $15.00 G-2 1/8 1 5/16 2.81/3V600sH $39.00 5.95 6.00 sH $15.00 G-2 1/8 1 5/16 3.71/3V650sH $43.00 6.45 6.50 sH $15.00 G-2 1/8 1 5/16 3.41/3V690sH $51.00 6.85 6.90 sH $15.00 G-3 1/8 1 5/16 4.11/3V800sDs $59.00 7.95 8.00 sDs $17.00 G-3 0 1 5/16 4.81/3V1060sDs $98.00 10.55 10.60 sDs $17.00 G-3 0 1 5/16 7.41/3V1400sK $118.00 13.95 14.00 sK $27.00 G-3 7/16 1 15/16 12.11/3V1900sK $197.00 18.95 19.00 sK $27.00 G-3 7/16 1 15/16 18.0


TYPE C

F

K

LOD PD

TYPE G

FK

L

OD PD

Drive Components sheaves and pulleys are protected with a high density baked gloss enamel coating to resist chipping, flaking and finish deterioration due to ambient moisture, abrasive environment or extremes of temperature.


FACTS




TYPE E

F K

LOD PD

3v section Qd sheAves2 GRooVe f = 1 1/16"


2/3V220Ja $28.00 2.15 2.20 Ja $11.00 e-1 7/16 1 .92/3V235Ja $29.00 2.30 2.35 Ja $11.00 e-1 7/16 1 .92/3V250Ja $30.00 2.45 2.50 Ja $11.00 e-1 7/16 1 1.02/3V265Ja $31.00 2.60 2.65 Ja $11.00 D-1 1/8 1 .82/3V280Ja $31.00 2.75 2.80 Ja $11.00 D-1 1/8 1 1.02/3V300Ja $32.00 2.95 3.00 Ja $11.00 D-1 1/8 1 1.12/3V315Ja $33.00 3.10 3.15 Ja $11.00 D-1 1/8 1 1.22/3V335sH $35.00 3.30 3.35 sH $15.00 D-1 9/64 1 5/16 1.22/3V365sH $36.00 3.60 3.65 sH $15.00 D-1 9/64 1 5/16 1.72/3V412sH $39.00 4.07 4.12 sH $15.00 D-1 9/32 1 5/16 2.32/3V450sH $43.00 4.45 4.50 sH $15.00 D-1 9/32 1 5/16 2.82/3V475sH $47.00 4.70 4.75 sH $15.00 D-1 9/32 1 5/16 2.62/3V500sH $51.00 4.95 5.00 sH $15.00 D-1 9/32 1 5/16 2.92/3V530sH $53.00 5.25 5.30 sH $15.00 D-1 9/32 1 5/16 3.12/3V560sH $55.00 5.55 5.60 sH $15.00 D-2 9/32 1 5/16 3.42/3V600sH $57.00 5.95 6.00 sH $15.00 D-2 9/32 1 5/16 3.82/3V650sDs $63.00 6.45 6.50 sDs $17.00 D-2 5/16 1 5/16 4.52/3V690sDs $69.00 6.85 6.90 sDs $17.00 D-2 5/16 1 5/16 4.72/3V800sDs $71.00 7.95 8.00 sDs $17.00 D-3 5/16 1 5/16 4.82/3V1060sK $108.00 10.55 10.60 sK $27.00 f-3 5/32 1 15/16 9.62/3V1400sK $171.00 13.95 14.00 sK $27.00 f-3 5/32 1 15/16 12.6

2/3V1900sK $201.00 18.95 19.00 sK $27.00 f-3 5/32 1 15/16 20.62/3V2500sf $377.00 24.95 25.00 sf $33.00 e-3 1/4 2 1/16 31.5


TYPE D

FK

L

OD PD

TYPE F

FK

L

OD PD





TYPE E

F K

LOD PD



3/3V250Ja $35.00 2.45 2.50 Ja $11.00 e-1 7/16 1 1.23/3V265Ja $36.00 2.60 2.65 Ja $11.00 D-1 1/8 1 1.13/3V280Ja $37.00 2.75 2.80 Ja $11.00 D-1 1/8 1 1.33/3V300sH $38.00 2.95 3.00 sH $15.00 e-1 5/16 1 5/16 1.73/3V315sH $39.00 3.10 3.15 sH $15.00 e-1 5/16 1 5/16 1.83/3V335sH $40.00 3.30 3.35 sH $15.00 D-1 1/8 1 5/16 1.63/3V365sH $42.00 3.60 3.65 sH $15.00 D-1 1/8 1 5/16 2.03/3V412sH $43.00 4.07 4.12 sH $15.00 a-1 11/16 1 5/16 2.73/3V450sDs $49.00 4.45 4.50 sDs $17.00 a-1 11/16 1 5/16 3.13/3V475sDs $53.00 4.70 4.75 sDs $17.00 a-1 11/16 1 5/16 3.63/3V500sDs $57.00 4.95 5.00 sDs $17.00 a-1 11/16 1 5/16 4.03/3V530sDs $59.00 5.25 5.30 sDs $17.00 a-1 11/16 1 5/16 3.93/3V560sDs $61.00 5.55 5.60 sDs $17.00 a-1 11/16 1 5/16 4.43/3V600sDs $65.00 5.95 6.00 sDs $17.00 a-2 11/16 1 5/16 4.93/3V650sDs $67.00 6.45 6.50 sDs $17.00 a-2 11/16 1 5/16 5.83/3V690sDs $79.00 6.85 6.90 sDs $17.00 a-2 11/16 1 5/16 5.93/3V800sK $85.00 7.95 8.00 sK $27.00 C-3 1/4 1 15/16 8.23/3V1060sK $124.00 10.55 10.60 sK $27.00 C-3 1/4 1 15/16 12.03/3V1400sK $181.00 13.95 14.00 sK $27.00 C-3 1/4 1 15/16 14.83/3V1900sf $213.00 18.95 19.00 sf $33.00 C-3 1/4 2 1/16 26.03/3V2500sf $393.00 24.95 25.00 sf $33.00 C-3 1/4 2 1/16 42.03/3V3350sf $708.00 33.45 33.50 sf $33.00 C-3 1/4 2 1/16 70.8


TYPE A

F

K

LOD

PD

TYPE C

F

K

LOD PD

TYPE D

FK

L

OD PD

Drive Components sheaves and pulleys are statically balanced to be vibration free at nominal operating speeds. Rim speeds in excess of 6,500 feet/minute require special consideration. Refer to page 35 for details.


FACTS




TYPE E

F K

LOD PD



4/3V265Ja $42.00 2.60 2.65 Ja $11.00 D-1 1/8 1 1.44/3V280Ja $42.00 2.75 2.80 Ja $11.00 D-1 1/8 1 1.74/3V300sH $43.00 2.95 3.00 sH $15.00 e-1 0 1 5/16 2.04/3V315sH $44.00 3.10 3.15 sH $15.00 e-1 0 1 5/16 2.04/3V335sH $46.00 3.30 3.35 sH $15.00 D-1 1/8 1 5/16 1.94/3V365sH $47.00 3.60 3.65 sH $15.00 D-1 1/8 1 5/16 2.34/3V412sH $49.00 4.07 4.12 sH $15.00 a-1 13/16 1 5/16 3.14/3V450sDs $51.00 4.45 4.50 sDs $17.00 a-1 13/16 1 5/16 3.54/3V475sDs $55.00 4.70 4.75 sDs $17.00 a-1 13/16 1 5/16 3.74/3V500sDs $59.00 4.95 5.00 sDs $17.00 a-1 13/16 1 5/16 4.34/3V530sDs $63.00 5.25 5.30 sDs $17.00 a-1 13/16 1 5/16 5.04/3V560sDs $65.00 5.55 5.60 sDs $17.00 a-1 13/16 1 5/16 5.54/3V600sK $69.00 5.95 6.00 sK $27.00 D-1 5/8 1 15/16 7.04/3V650sK $71.00 6.45 6.50 sK $27.00 D-2 5/8 1 15/16 7.34/3V690sK $81.00 6.85 6.90 sK $27.00 D-2 5/8 1 15/16 8.24/3V800sK $86.00 7.95 8.00 sK $27.00 D-3 5/8 1 15/16 9.44/3V1060sK $126.00 10.55 10.60 sK $27.00 D-3 5/8 1 15/16 13.44/3V1400sK $193.00 13.95 14.00 sK $27.00 D-3 5/8 1 15/16 18.34/3V1900sf $248.00 18.95 19.00 sf $33.00 C-3 21/32 2 1/16 29.74/3V2500sf $650.00 24.95 25.00 sf $33.00 C-3 21/32 2 1/16 44.04/3V3350e $767.00 33.45 33.50 e $69.00 C-3 9/32 2 3/4 78.0


TYPE A

F

K

LOD

PD

TYPE C

F

K

LOD PD

TYPE D

FK

L

OD PD

all Drive Components sheave and pulley products are competitively priced to afford our customers maximum return on dollars invested. Drive Components products are not the lowest cost: Highest quality is neVeR available at the lowest cost.


FACTS






5/3V475sDs $61.00 4.70 4.75 sDs $17.00 a-1 13/16 1 5/16 4.35/3V500sDs $67.00 4.95 5.00 sDs $17.00 a-1 13/16 1 5/16 4.85/3V530sK $69.00 5.25 5.30 sK $27.00 a-1 15/16 1 15/16 5.95/3V560sK $75.00 5.55 5.60 sK $27.00 a-1 15/16 1 15/16 6.85/3V600sK $77.00 5.95 6.00 sK $27.00 a-1 15/16 1 15/16 8.05/3V650sK $79.00 6.45 6.50 sK $27.00 a-1 15/16 1 15/16 8.15/3V690sK $86.00 6.85 6.90 sK $27.00 a-2 15/16 1 15/16 9.25/3V800sK $92.00 7.95 8.00 sK $27.00 a-2 15/16 1 15/16 10.85/3V1060sK $128.00 10.55 10.60 sK $27.00 a-3 15/16 1 15/16 15.35/3V1400sf $228.00 13.95 14.00 sf $33.00 a-3 7/8 2 1/16 23.45/3V1900sf $287.00 18.95 19.00 sf $33.00 a-3 7/8 2 1/16 27.65/3V2500e $428.00 24.95 25.00 e $69.00 C-3 11/16 2 3/4 53.05/3V3350e $835.00 33.45 33.50 e $69.00 C-3 11/16 2 3/4 87.0


TYPE A

F

K

LOD

PD

TYPE C

F

K

LOD PD

typicAl nomenclAture seQuence For 3v Qd sheAves

5 3v 600 sk

number of Grooves

belt Cross section

sheave o.D.in inches (6.00")

QD bushing







6/3V475sK $83.00 4.70 4.75 sK $27.00 D-1 1/8 1 15/16 5.06/3V500sK $85.00 4.95 5.00 sK $27.00 D-1 1/8 1 15/16 5.76/3V530sK $86.00 5.25 5.30 sK $27.00 a-1 1 5/16 1 15/16 6.76/3V560sK $88.00 5.55 5.60 sK $27.00 a-1 1 5/16 1 15/16 7.56/3V600sK $90.00 5.95 6.00 sK $27.00 a-1 1 5/16 1 15/16 8.86/3V650sK $92.00 6.45 6.50 sK $27.00 a-1 1 5/16 1 15/16 9.36/3V690sK $110.00 6.85 6.90 sK $27.00 a-2 1 5/16 1 15/16 10.06/3V800sK $122.00 7.95 8.00 sK $27.00 a-2 1 5/16 1 15/16 11.76/3V1060sf $142.00 10.55 10.60 sf $33.00 a-2 7/8 2 1/16 19.16/3V1400sf $244.00 13.95 14.00 sf $33.00 a-3 7/8 2 1/16 24.26/3V1900e $303.00 18.95 19.00 e $69.00 b-3 1 3/32 2 3/4 39.56/3V2500e $444.00 24.95 25.00 e $69.00 b-3 1 3/32 2 3/4 65.76/3V3350e $885.00 33.45 33.50 e $69.00 b-3 1 3/32 2 3/4 80.0


TYPE A

F

K

LOD

PD

TYPE B

F

K

LOD PD

TYPE D

FK

L

OD PD

Take advantage of Drive Components exclusive no GaMble GaMble! We invite and encourage you to challenge us to a side by side comparison of our products against your current supplier.Tell us what size(s) you would like to evaluate and we’ll send those to you free of charge. if our products do not exceed your current drive units in appearance, dimensional accuracy, operational functionality, and of course acquisition cost, simply return the parts...no questions asked. Contact Drive Components for complete details on the no GaMble GaMble program.


FACTS






8/3V475sK $104.00 4.70 4.75 sK $27.00 D-1 1/8 1 15/16 5.88/3V500sK $108.00 4.95 5.00 sK $27.00 D-1 1/8 1 15/16 6.88/3V530sK $122.00 5.25 5.30 sK $27.00 a-1 1 5/16 1 15/16 7.68/3V560sK $124.00 5.55 5.60 sK $27.00 a-1 1 5/16 1 15/16 8.78/3V600sK $126.00 5.95 6.00 sK $27.00 a-1 1 5/16 1 15/16 10.38/3V650sK $128.00 6.45 6.50 sK $27.00 a-1 1 5/16 1 15/16 10.78/3V690sK $130.00 6.85 6.90 sK $27.00 a-2 1 5/16 1 15/16 11.88/3V800sf $145.00 7.95 8.00 sf $33.00 a-2 1 1/8 2 1/16 15.58/3V1060sf $206.00 10.55 10.60 sf $33.00 a-3 1 1/8 2 1/16 21.98/3V1400e $279.00 13.95 14.00 e $69.00 a-3 1 1/4 2 3/4 33.48/3V1900e $436.00 18.95 19.00 e $69.00 a-3 1 1/4 2 3/4 47.28/3V2240e $528.00 22.35 22.40 e $69.00 a-3 1 1/4 2 3/4 57.58/3V2500e $589.00 24.95 25.00 e $69.00 a-3 1 1/4 2 3/4 67.88/3V3350f $964.00 33.45 33.50 f $123.00 b-3 1 1/32 3 3/4 112.0


TYPE A

F

K

LOD

PD

TYPE B

F

K

LOD PD

TYPE D

FK

L

OD PD

assistance in drive design, application or general engineering support is always available through your Drive Components sales representative or by contacting Drive Components. Whether your request is for basic information or for a complex drive application, Drive Components will be pleased to assist you.


FACTS




TYPE D

FK

L

OD PD



10/3V475sK $129.00 4.70 4.75 sK $27.00 D-1 1/8 1 15/16 6.910/3V500sK $130.00 4.95 5.00 sK $27.00 D-1 1/8 1 15/16 8.110/3V530sK $131.00 5.25 5.30 sK $27.00 a-1 1 7/16 1 15/16 8.810/3V560sK $132.00 5.55 5.60 sK $27.00 a-1 1 7/16 1 15/16 10.110/3V600sK $133.00 5.95 6.00 sK $27.00 a-1 1 7/16 1 15/16 13.810/3V650sK $143.00 6.45 6.50 sK $27.00 a-1 1 7/16 1 15/16 13.710/3V690sK $145.00 6.85 6.90 sK $27.00 a-2 1 7/16 1 15/16 14.110/3V700sf $220.00 6.95 7.00 sf $33.00 a-1 1 7/16 1 15/16 16.710/3V800sf $193.00 7.95 8.00 sf $33.00 a-2 1 1/2 2 1/16 18.110/3V1060e $249.00 10.55 10.60 e $69.00 a-3 1 1/4 2 3/4 29.210/3V1400e $318.00 13.95 14.00 e $69.00 a-3 1 1/4 2 3/4 37.010/3V1900e $469.00 18.95 19.00 e $69.00 a-3 1 1/4 2 3/4 54.010/3V2500f $593.00 24.95 25.00 f $123.00 a-3 1 5/16 3 3/4 90.010/3V3350f $1,094.00 33.45 33.50 f $123.00 a-3 1 5/16 3 3/4 178.0


TYPE A

F

K

LOD

PD


Drive Components products are manufactured in our associate iso-9001 certified plants located in the PRC. sheaves*, pulleys and bushings are individually boxed, labeled and bar coded. Unique bar codes per customer specifications are available on volume orders of like or multiple sizes. Contact Drive Components for delivery information.*sheaves 20" and larger sizes are “lagged” and strapped to protect groove surfaces.

FACTS






2/5V440sH $72.00 4.30 4.40 sH $15.00 a-1 11/16 1 5/16 3.32/5V465sDs $78.00 4.55 4.65 sDs $17.00 e-1 3/16 1 5/16 3.72/5V490sDs $84.00 4.80 4.90 sDs $17.00 a-1 11/16 1 5/16 3.92/5V520sDs $89.00 5.10 5.20 sDs $17.00 a-1 11/16 1 5/16 4.62/5V550sDs $95.00 5.40 5.50 sDs $17.00 a-1 11/16 1 5/16 5.12/5V590sDs $101.00 5.80 5.90 sDs $17.00 a-1 11/16 1 5/16 5.62/5V630sK $107.00 6.20 6.30 sK $27.00 C-1 7/16 1 15/16 7.42/5V670sK $113.00 6.60 6.70 sK $27.00 C-1 7/16 1 15/16 7.52/5V710sK $118.00 7.00 7.10 sK $27.00 C-1 7/16 1 15/16 7.92/5V750sK $120.00 7.40 7.50 sK $27.00 C-1 7/16 1 15/16 8.72/5V800sK $122.00 7.90 8.00 sK $27.00 C-2 7/16 1 15/16 10.02/5V850sK $126.00 8.40 8.50 sK $27.00 C-2 7/16 1 15/16 10.82/5V900sK $134.00 8.90 9.00 sK $27.00 C-2 7/16 1 15/16 11.42/5V925sK $141.00 9.15 9.25 sK $27.00 C-2 7/16 1 15/16 12.02/5V975sK $145.00 9.65 9.75 sK $27.00 C-3 7/16 1 15/16 12.62/5V1030sK $149.00 10.20 10.30 sK $27.00 C-3 7/16 1 15/16 14.52/5V1090sK $153.00 10.80 10.90 sK $27.00 C-3 7/16 1 15/16 15.52/5V1130sK $157.00 11.20 11.30 sK $27.00 C-3 7/16 1 15/16 14.32/5V1180sK $159.00 11.70 11.80 sK $27.00 C-3 7/16 1 15/16 17.12/5V1250sf $161.00 12.40 12.50 sf $33.00 C-3 7/16 1 15/16 18.82/5V1320sf $173.00 13.10 13.20 sf $33.00 C-3 7/16 2 1/16 19.82/5V1400sf $226.00 13.90 14.00 sf $33.00 C-3 7/16 2 1/16 22.32/5V1500sf $230.00 14.90 15.00 sf $33.00 C-3 7/16 2 1/16 23.92/5V1600sf $248.00 15.90 16.00 sf $33.00 C-3 7/16 2 1/16 26.02/5V1870sf $295.00 18.60 18.70 sf $33.00 C-3 7/16 2 1/16 32.62/5V2120sf $409.00 21.10 21.20 sf $33.00 C-3 7/16 2 1/16 38.02/5V2360e $472.00 23.50 23.60 e $69.00 C-3 1/16 2 3/4 46.02/5V2800e $482.00 27.90 28.00 e $69.00 C-3 1/16 2 3/4 71.0

TYPE A

F

K

LOD

PD

TYPE C

F

K

LOD PD

TYPE E

F K

LOD PD








3/5V440sDs $78.00 4.30 4.40 sDs $17.00 e-1 0 1 5/16 4.23/5V465sDs $84.00 4.55 4.65 sDs $17.00 e-1 0 1 5/16 4.73/5V490sDs $89.00 4.80 4.90 sDs $17.00 a-1 1 1/16 1 5/16 4.83/5V520sDs $95.00 5.10 5.20 sDs $17.00 a-1 1 1/16 1 5/16 5.93/5V550sDs $101.00 5.40 5.50 sDs $17.00 a-1 1 1/16 1 5/16 6.63/5V590sDs $107.00 5.80 5.90 sDs $17.00 a-1 1 1/16 1 5/16 7.53/5V630sK $113.00 6.20 6.30 sK $27.00 a-1 1 1/16 1 15/16 9.33/5V670sK $119.00 6.60 6.70 sK $27.00 a-1 1 1/8 1 15/16 10.83/5V710sf $126.00 7.00 7.10 sf $33.00 a-1 1 1/8 2 1/16 11.43/5V750sf $132.00 7.40 7.50 sf $33.00 a-1 1 1/8 2 1/16 12.53/5V800sf $140.00 7.90 8.00 sf $33.00 a-1 1 1/8 2 1/16 12.73/5V850sf $143.00 8.40 8.50 sf $33.00 a-2 1 1/8 2 1/16 14.53/5V900sf $147.00 8.90 9.00 sf $33.00 a-2 1 1/8 2 1/16 15.63/5V925sf $153.00 9.15 9.25 sf $33.00 a-2 1 1/8 2 1/16 21.73/5V975sf $159.00 9.65 9.75 sf $33.00 a-2 1 1/8 2 1/16 17.03/5V1030sf $169.00 10.20 10.30 sf $33.00 a-2 1 1/8 2 1/16 18.23/5V1090sf $173.00 10.80 10.90 sf $33.00 a-2 1 1/8 2 1/16 19.43/5V1130sf $177.00 11.20 11.30 sf $33.00 a-3 1 1/8 2 1/16 20.03/5V1180sf $191.00 11.70 11.80 sf $33.00 a-3 1 1/8 2 1/16 21.23/5V1250e $199.00 12.40 12.50 e $69.00 C-3 3/4 2 3/4 28.33/5V1320e $208.00 13.10 13.20 e $69.00 C-3 3/4 2 3/4 30.0

3/5V1400e $254.00 13.90 14.00 e $69.00 C-3 3/4 2 3/4 31.13/5V1500e $269.00 14.90 15.00 e $69.00 C-3 3/4 2 3/4 32.53/5V1600e $277.00 15.90 16.00 e $69.00 C-3 3/4 2 3/4 35.63/5V1870e $322.00 18.60 18.70 e $69.00 C-3 3/4 2 3/4 42.83/5V2120e $432.00 21.10 21.20 e $69.00 C-3 3/4 2 3/4 49.43/5V2360e $491.00 23.50 23.60 e $69.00 C-3 3/4 2 3/4 56.43/5V2800e $531.00 27.90 28.00 e $69.00 C-3 3/4 2 3/4 70.03/5V3150f $904.00 31.40 31.50 f $123.00 f-3 1/8 3 3/4 95.03/5V3750f $1,160.00 37.40 37.50 f $123.00 f-3 1/8 3 3/4 151.53/5V5000f $1,789.00 49.90 50.00 f $123.00 f-3 1/8 3 3/4 185.0

TYPE A

F

K

LOD

PD

TYPE C

F

K

LOD PD

TYPE E

F K

LOD PD

TYPE F

FK

LO

D PD








4/5V440sD $90.00 4.30 4.40 sD $21.00 e-1 0 1 13/16 5.44/5V465sD $96.00 4.55 4.65 sD $21.00 e-1 0 1 13/16 6.34/5V490sD $102.00 4.80 4.90 sD $21.00 a-1 1 5/16 1 13/16 6.84/5V520sD $108.00 5.10 5.20 sD $21.00 a-1 1 5/16 1 13/16 7.74/5V550sD $114.00 5.40 5.50 sD $21.00 a-1 1 5/16 1 13/16 8.94/5V590sD $120.00 5.80 5.90 sD $21.00 a-1 1 5/16 1 13/16 10.24/5V630sK $126.00 6.20 6.30 sK $27.00 a-1 1 5/16 1 15/16 10.84/5V670sK $132.00 6.60 6.70 sK $27.00 a-1 1 5/16 1 15/16 12.44/5V710sf $138.00 7.00 7.10 sf $33.00 a-1 1 1/16 2 1/16 13.44/5V750sf $145.00 7.40 7.50 sf $33.00 a-1 1 1/16 2 1/16 15.14/5V800e $153.00 7.90 8.00 e $69.00 b-1 1 7/16 2 3/4 18.04/5V850e $159.00 8.40 8.50 e $69.00 b-1 1 7/16 2 3/4 20.14/5V900e $161.00 8.90 9.00 e $69.00 b-1 1 7/16 2 3/4 22.34/5V925e $165.00 9.15 9.25 e $69.00 b-1 1 7/16 2 3/4 23.94/5V975e $193.00 9.65 9.75 e $69.00 b-2 1 7/16 2 3/4 23.34/5V1030e $197.00 10.20 10.30 e $69.00 b-2 1 7/16 2 3/4 25.54/5V1090e $202.00 10.80 10.90 e $69.00 b-2 1 7/16 2 3/4 28.04/5V1130e $220.00 11.20 11.30 e $69.00 b-2 1 7/16 2 3/4 28.54/5V1180e $222.00 11.70 11.80 e $69.00 b-2 1 7/16 2 3/4 29.94/5V1250e $230.00 12.40 12.5 e $69.00 b-3 1 7/16 2 3/4 31.24/5V1320e $252.00 13.10 13.20 e $69.00 b-3 1 7/16 2 3/4 33.74/5V1400e $285.00 13.90 14.00 e $69.00 b-3 1 7/16 2 3/4 34.44/5V1500e $314.00 14.90 15.00 e $69.00 b-3 1 7/16 2 3/4 37.04/5V1600e $334.00 15.90 16.00 e $69.00 b-3 1 7/16 2 3/4 39.64/5V1870e $374.00 18.60 18.70 e $69.00 a-3 1 1/4 2 3/4 51.84/5V2120e $503.00 21.10 21.20 e $69.00 a-3 1 1/4 2 3/4 58.34/5V2360f $537.00 23.50 23.60 f $123.00 C-3 7/8 3 3/4 95.14/5V2800f $609.00 27.90 28.00 f $123.00 C-3 7/8 3 3/4 92.04/5V3150f $953.00 31.40 31.50 f $123.00 C-3 7/8 3 3/4 108.04/5V3750f $1,219.00 37.40 37.50 f $123.00 C-3 7/8 3 3/4 138.04/5V5000J $1,891.00 45.90 50.00 J $153.00 b-3 1/8 4 5/8 227.0

TYPE A

F

K

LOD

PDTYPE C

F

K

LOD PD

TYPE B

F

K

LOD PD

TYPE E

F K

LOD PD








5/5V440sD $102.00 4.30 4.40 sD $21.00 e-1 0 1 13/16 6.45/5V465sD $108.00 4.55 4.65 sD $21.00 e-1 0 1 13/16 7.25/5V490sD $114.00 4.80 4.90 sD $21.00 a-1 1 5/16 1 13/16 7.85/5V520sD $120.00 5.10 5.20 sD $21.00 a-1 1 5/16 1 13/16 9.05/5V550sD $126.00 5.40 5.50 sD $21.00 a-1 1 5/16 1 13/16 10.25/5V590sK $132.00 5.80 5.90 sK $27.00 a-1 1 5/16 1 15/16 10.85/5V630sK $138.00 6.20 6.30 sK $27.00 a-1 1 5/16 1 15/16 12.35/5V670sf $143.00 6.60 6.70 sf $33.00 a-1 1 3/8 2 1/16 13.45/5V710sf $155.00 7.00 7.10 sf $33.00 a-1 1 3/8 2 1/16 15.25/5V750sf $171.00 7.40 7.50 sf $33.00 a-1 1 3/8 2 1/16 16.95/5V800e $181.00 7.90 8.00 e $69.00 a-1 1 3/4 2 3/4 19.75/5V850e $187.00 8.40 8.50 e $69.00 a-1 1 3/4 2 3/4 23.15/5V900e $195.00 8.90 9.00 e $69.00 a-1 1 3/4 2 3/4 26.45/5V925e $199.00 9.15 9.25 e $69.00 a-1 1 3/4 2 3/4 28.35/5V975e $214.00 9.65 9.75 e $69.00 a-2 1 3/4 2 3/4 26.25/5V1030e $216.00 10.20 10.30 e $69.00 a-2 1 3/4 2 3/4 28.55/5V1090e $218.00 10.80 10.90 e $69.00 a-2 1 3/4 2 3/4 30.75/5V1130e $238.00 11.20 11.30 e $69.00 a-2 1 3/4 2 3/4 32.35/5V1180e $240.00 11.70 11.80 e $69.00 a-2 1 3/4 2 3/4 33.55/5V1250e $277.00 12.40 12.50 e $69.00 a-3 1 3/4 2 3/4 36.35/5V1320e $295.00 13.10 13.20 e $69.00 a-3 1 3/4 2 3/4 38.4

5/5V1400e $338.00 13.90 14.00 e $69.00 a-3 1 3/4 2 3/4 40.05/5V1500e $377.00 14.90 15.00 e $69.00 a-3 1 3/4 2 3/4 42.75/5V1600e $397.00 15.90 16.00 e $69.00 a-3 1 3/4 2 3/4 58.05/5V1870f $425.00 18.60 18.70 f $123.00 b-3 1 1/4 3 3/4 67.05/5V2120f $527.00 21.10 21.20 f $123.00 b-3 1 1/4 3 3/4 88.05/5V2360f $576.00 23.50 23.60 f $123.00 b-3 1 1/4 3 3/4 114.95/5V2800f $649.00 27.90 28.00 f $123.00 b-3 1 1/4 3 3/4 126.05/5V3150J $1,061.00 31.40 31.50 J $153.00 C-3 9/16 4 5/8 132.05/5V3750J $1,356.00 37.40 37.50 J $153.00 C-3 9/16 4 5/8 174.05/5V5000J $1,938.00 45.90 50.00 J $153.00 C-3 9/16 4 5/8 247.0

TYPE A

F

K

LOD

PD

TYPE C

F

K

LOD PD

TYPE B

F

K

LOD PD

TYPE E

F K

LOD PD








6/5V440sD $112.00 4.30 4.40 sD $21.00 e-1 0 1 13/16 7.76/5V465sD $118.00 4.55 4.65 sD $21.00 e-1 0 1 13/16 8.16/5V490sD $124.00 4.80 4.90 sD $21.00 a-1 1 5/16 1 13/16 8.16/5V520sD $130.00 5.10 5.20 sD $21.00 a-1 1 5/16 1 13/16 10.56/5V550sD $136.00 5.40 5.50 sD $21.00 a-1 1 5/16 1 13/16 12.06/5V590sK $141.00 5.80 5.90 sK $27.00 a-1 1 5/16 1 15/16 12.66/5V630sK $147.00 6.20 6.30 sK $27.00 a-1 1 5/16 1 15/16 14.56/5V670sf $151.00 6.60 6.70 sf $33.00 a-1 1 5/8 2 1/16 15.46/5V710sf $157.00 7.00 7.10 sf $33.00 a-1 1 5/8 2 1/16 17.46/5V750sf $173.00 7.40 7.50 sf $33.00 a-1 1 5/8 2 1/16 19.46/5V800e $183.00 7.90 8.00 e $69.00 a-1 2 2 3/4 22.76/5V850e $195.00 8.40 8.50 e $69.00 a-1 2 2 3/4 26.06/5V900e $216.00 8.90 9.00 e $69.00 a-1 2 2 3/4 29.46/5V925e $220.00 9.15 9.25 e $69.00 a-1 2 2 3/4 30.86/5V975e $224.00 9.65 9.75 e $69.00 a-2 2 2 3/4 35.06/5V1030e $244.00 10.20 10.30 e $69.00 a-2 2 2 3/4 33.06/5V1090e $256.00 10.80 10.90 e $69.00 a-2 2 2 3/4 35.66/5V1130e $265.00 11.20 11.30 e $69.00 a-2 2 2 3/4 36.76/5V1180e $277.00 11.70 11.80 e $69.00 a-2 2 2 3/4 41.46/5V1250f $314.00 12.40 12.50 f $123.00 b-3 15/16 3 3/4 45.26/5V1320f $336.00 13.10 13.20 f $123.00 b-3 15/16 3 3/4 50.06/5V1400f $377.00 13.90 14.00 f $123.00 b-3 15/16 3 3/4 52.66/5V1500f $417.00 14.90 15.00 f $123.00 b-3 15/16 3 3/4 55.26/5V1600f $456.00 15.90 16.00 f $123.00 b-3 15/16 3 3/4 58.06/5V1870f $511.00 18.60 18.75 f $123.00 a-3 1 5/16 3 3/4 70.06/5V2120f $580.00 21.10 21.20 f $123.00 a-3 1 15/16 3 3/4 116.06/5V2360J $649.00 23.50 23.60 J $153.00 b-3 1 1/4 4 5/8 117.56/5V2800J $727.00 27.90 28.00 J $153.00 b-3 1 1/4 4 5/8 125.06/5V3150J $1,160.00 31.40 31.50 J $153.00 b-3 1 1/4 4 5/8 200.06/5V3750J $1,415.00 37.40 37.50 J $153.00 b-3 1 1/4 4 5/8 235.06/5V5000M $2,236.00 45.50 50.00 M $306.00 C-3 3/4 6 3/4 330.0


TYPE A

F

K

LOD

PDTYPE C

F

K

LOD PD

TYPE B

F

K

LOD PD

TYPE E

F K

LOD PD







8/5V710sf $183.00 7.00 7.10 sf $33.00 a-1 2 1/8 2 1/16 20.78/5V750sf $202.00 7.40 7.50 sf $33.00 a-1 2 1/8 2 1/16 23.18/5V800e $222.00 7.90 8.00 e $69.00 a-1 2 1/2 2 3/4 26.88/5V850e $244.00 8.40 8.50 e $69.00 a-1 2 1/2 2 3/4 29.58/5V900e $263.00 8.90 9.00 e $69.00 a-1 2 1/2 2 3/4 35.08/5V925f $295.00 9.15 9.25 f $123.00 a-1 2 1/2 3 3/4 40.58/5V975f $314.00 9.65 9.75 f $123.00 a-1 2 9/16 3 3/4 46.08/5V1030f $334.00 10.20 10.30 f $123.00 a-1 2 9/16 3 3/4 47.38/5V1090f $342.00 10.80 10.90 f $123.00 a-2 2 9/16 3 3/4 48.58/5V1130f $350.00 11.20 11.30 f $123.00 a-2 2 9/16 3 3/4 50.08/5V1180f $368.00 11.70 11.80 f $123.00 a-2 2 9/16 3 3/4 53.08/5V1250f $381.00 12.40 12.50 f $123.00 a-2 2 9/16 3 3/4 56.38/5V1320f $432.00 13.10 13.20 f $123.00 a-3 2 9/16 3 3/4 59.08/5V1400f $472.00 13.90 14.00 f $123.00 a-3 2 9/16 3 3/4 63.58/5V1500f $550.00 14.90 15.00 f $123.00 a-3 2 9/16 3 3/4 68.08/5V1600f $629.00 15.90 16.00 f $123.00 a-3 2 9/16 3 3/4 74.08/5V1870J $688.00 18.60 18.75 J $153.00 a-3 1 9/16 4 5/8 94.08/5V2120J $747.00 21.10 21.20 J $153.00 a-3 1 9/16 4 5/8 106.08/5V2360J $826.00 23.50 23.60 J $153.00 a-3 1 9/16 4 5/8 120.08/5V2800J $1,002.00 27.90 28.00 J $153.00 a-3 1 9/16 4 5/8 145.08/5V3150M $1,415.00 31.40 31.50 M $306.00 b-3 5/8 6 3/4 196.2

8/5V3750M $1,749.00 37.40 37.50 M $306.00 b-3 5/8 6 3/4 248.08/5V5000M $2,469.00 45.50 50.00 M $306.00 b-3 5/8 6 3/4 367.0


TYPE A

F

K

LOD

PD

TYPE B

F

K

LOD PD


When dynamic balancing (in two(2) planes) is required, if possible the sheave and bushing should be balanced as a unit to insure safe, vibration free operation.

FACTS






10/5V800e $252.00 7.90 8.00 e $69.00 a-1 3 1/4 2 3/4 30.910/5V850e $272.00 8.40 8.50 e $69.00 a-1 3 1/4 2 3/4 34.910/5V900f $301.00 8.90 9.00 f $123.00 a-1 3 5/16 3 3/4 43.710/5V925f $346.00 9.15 9.25 f $123.00 a-1 3 5/16 3 3/4 45.610/5V975f $360.00 9.65 9.75 f $123.00 a-1 3 5/16 3 3/4 51.010/5V1030f $372.00 10.20 10.30 f $123.00 a-1 3 5/16 3 3/4 59.010/5V1090f $394.00 10.80 10.90 f $123.00 a-2 3 5/16 3 3/4 65.510/5V1130f $439.00 11.20 11.30 f $123.00 a-2 3 5/16 3 3/4 60.810/5V1180f $481.00 11.70 11.80 f $123.00 a-2 3 5/16 3 3/4 63.010/5V1250J $509.00 12.40 12.50 J $153.00 a-2 3 9/16 4 5/8 71.310/5V1320J $579.00 13.10 13.20 J $153.00 a-2 3 9/16 4 5/8 79.510/5V1400J $657.00 13.90 14.00 J $153.00 a-2 3 9/16 4 5/8 88.010/5V1500J $719.00 14.90 15.00 J $153.00 a-2 3 9/16 4 5/8 94.510/5V1600J $762.00 15.90 16.00 J $153.00 a-3 3 9/16 4 5/8 101.210/5V1870J $879.00 18.60 18.70 J $153.00 a-3 1 9/16 4 5/8 109.610/5V2120J $970.00 21.10 21.20 J $153.00 a-3 1 9/16 4 5/8 122.010/5V2360M $1,039.00 23.50 23.60 M $306.00 b-3 1 15/16 6 3/4 174.010/5V2800M $1,273.00 27.90 28.00 M $306.00 b-3 1 15/16 6 3/4 214.010/5V3150M $1,551.00 31.40 31.50 M $306.00 b-3 1 15/16 6 3/4 238.010/5V3750M $1,830.00 37.40 37.50 M $306.00 b-3 1 15/16 6 3/4 283.010/5V5000M $3,103.00 45.50 50.00 M $306.00 b-3 1 15/16 6 3/4 427.0


TYPE A

F

K

LOD

PD

TYPE B

F

K

LOD PD


8 5v 800 e

number of Grooves

belt Cross section


QD bushing







4/8V1250f $547.00 12.30 12.50 f $123.00 a-1 1 3/16 3 3/4 60.04/8V1320f $555.00 13.00 13.20 f $123.00 a-2 1 3/16 3 3/4 64.04/8V1400f $563.00 13.80 14.00 f $123.00 a-2 1 3/16 3 3/4 68.34/8V1500f $599.00 14.80 15.00 f $123.00 a-2 1 3/16 3 3/4 72.64/8V1600f $663.00 15.80 16.00 f $123.00 a-2 1 3/16 3 3/4 77.04/8V1700f $724.00 16.80 17.00 f $123.00 a-3 1 3/16 3 3/4 83.54/8V1800f $764.00 17.80 18.00 f $123.00 a-3 1 3/16 3 3/4 90.04/8V1900f $794.00 18.80 19.00 f $123.00 a-3 1 3/16 3 3/4 112.04/8V2000J $824.00 19.80 20.00 J $153.00 a-3 1 7/16 4 5/8 114.04/8V2120J $844.00 21.00 21.20 J $153.00 a-3 1 7/16 4 5/8 140.04/8V2240J $891.00 22.20 22.40 J $153.00 a-3 1 7/16 4 5/8 150.04/8V2480M $1,196.00 24.60 24.80 M $306.00 f-3 5/16 6 3/4 211.04/8V3000M $1,357.00 29.80 30.00 M $306.00 f-3 5/16 6 3/4 264.04/8V3550M $1,799.00 35.30 35.50 M $306.00 f-3 5/16 6 3/4 367.04/8V4000M $2,410.00 39.80 40.00 M $306.00 f-3 5/16 6 3/4 300.0


TYPE A

F

K

LOD

PD

TYPE F

FK

L

OD PD

Drive Components sheaves and pulleys are manufactured from 30,000 Psi cast iron.Maximum allowable rim speed is 6500 feet/minute (fPM). for rim speeds over 6500 fPM, ductile iron or steel construction is required. Dynamic balancing is also recommended. Rim speed may be calculated as follows:

Fpm = sheave diameter (inches) x 0.2618 x sheave rpm

Contact Drive Components for engineering support, price, and delivery information.


FACTS




8v section Qd sheAves5 GRooVe f = 6"


5/8V1250f $591.00 12.30 12.50 f $123.00 a-1 2 5/16 3 3/4 82.85/8V1320f $621.00 13.00 13.20 f $123.00 a-2 2 5/16 3 3/4 96.05/8V1400f $663.00 13.80 14.00 f $123.00 a-2 2 5/16 3 3/4 81.05/8V1500f $704.00 14.80 15.00 f $123.00 a-2 2 5/16 3 3/4 84.55/8V1600f $744.00 15.80 16.00 f $123.00 a-2 2 5/16 3 3/4 95.55/8V1700J $850.00 16.80 17.00 J $153.00 a-3 2 4 5/8 104.55/8V1800J $905.00 17.80 18.00 J $153.00 a-3 2 4 5/8 115.25/8V1900J $965.00 18.80 19.00 J $153.00 a-3 2 4 5/8 122.05/8V2000J $995.00 19.80 20.00 J $153.00 a-3 2 4 5/8 133.05/8V2120J $1,156.00 21.00 21.20 J $153.00 a-3 2 4 5/8 140.05/8V2240M $1,317.00 22.20 22.40 M $306.00 b-3 13/16 6 3/4 182.05/8V2480M $1,397.00 24.60 24.80 M $306.00 b-3 13/16 6 3/4 201.05/8V3000M $1,578.00 29.80 30.00 M $306.00 b-3 13/16 6 3/4 254.05/8V3550M $1,941.00 35.30 35.50 M $306.00 b-3 13/16 6 3/4 298.05/8V4000M $2,218.00 39.80 40.00 M $306.00 b-3 13/16 6 3/4 337.0


TYPE A

F

K

LOD

PD

TYPE B

F

K

LOD PD

special sheave constructions and materials are available on an “as quoted” basis. Contact Drive Components with complete specifications and/or (preferably) drawings. Quantities determine cost and lead time.


FACTS






6/8V1250f $621.00 12.30 12.50 f $123.00 a-1 2 5/16 3 3/4 81.06/8V1320f $663.00 13.00 13.20 f $123.00 a-1 2 5/16 3 3/4 85.46/8V1400f $726.00 13.80 14.00 f $123.00 a-1 2 5/16 3 3/4 96.06/8V1500J $778.00 14.80 15.00 J $153.00 a-1 2 9/16 4 5/8 110.06/8V1600J $828.00 15.80 16.00 J $153.00 a-1 2 9/16 4 5/8 118.06/8V1700J $933.00 16.80 17.00 J $153.00 a-2 2 9/16 4 5/8 126.06/8V1800J $1,005.00 17.80 18.00 J $153.00 a-2 2 9/16 4 5/8 133.06/8V1900J $1,045.00 18.80 19.00 J $153.00 a-2 2 9/16 4 5/8 157.06/8V2000M $1,196.00 19.80 20.00 M $306.00 b-2 15/16 6 3/4 185.06/8V2120M $1,327.00 21.00 21.20 M $306.00 b-2 15/16 6 3/4 194.06/8V2240M $1,568.00 22.20 22.40 M $306.00 b-3 15/16 6 3/4 221.06/8V2480M $1,598.00 24.60 24.80 M $306.00 b-3 1 15/16 6 3/4 248.06/8V3000M $1,618.00 29.80 30.00 M $306.00 b-3 1 15/16 6 3/4 276.06/8V3550n $2,201.00 35.30 35.50 n $570.00 C-3 1 1/8 8 1/8 444.06/8V4000n $2,452.00 39.80 40.00 n $570.00 C-3 1 1/8 8 1/8 519.06/8V5300n $6,180.00 52.20 53.00 n $570.00 C-3 7/8 6 1/4 717.0


TYPE A

F

K

LOD

PD

TYPE B

F

K

LOD PD

TYPE C

F

K

LOD PD

Drive Components does not inventory taper lock* bushings. They are available on a “by order” basis for reasonable quantities of like or multiple sizes. Quantities and required delivery time will determine cost. Contact Drive Components for price and delivery.


FACTS






8/8V1250J $784.00 12.30 12.50 J $153.00 a-1 3 9/16 4 5/8 134.08/8V1320J $828.00 13.00 13.20 J $153.00 a-2 3 9/16 4 5/8 150.58/8V1400J $870.00 13.80 14.00 J $153.00 a-2 3 9/16 6 3/4 167.08/8V1500J $933.00 14.80 15.00 J $153.00 a-2 3 15/16 6 3/4 225.08/8V1600J $1,015.00 15.80 16.00 J $153.00 a-2 3 15/16 6 3/4 263.08/8V1700M $1,130.00 16.80 17.00 M $306.00 a-2 3 15/16 6 3/4 267.58/8V1800M $1,206.00 17.80 18.00 M $306.00 a-2 3 15/16 6 3/4 272.08/8V1900M $1,246.00 18.80 19.00 M $306.00 a-2 3 15/16 6 3/4 269.08/8V2000M $1,287.00 19.80 20.00 M $306.00 a-2 3 15/16 6 3/4 253.08/8V2120M $1,387.00 21.00 21.20 M $306.00 a-2 3 15/16 6 3/4 267.08/8V2240M $1,598.00 22.20 22.40 M $306.00 a-2 2 1/4 8 1/8 332.08/8V2480n $1,799.00 24.60 24.80 n $570.00 a-3 2 1/4 8 1/8 356.08/8V3000n $1,849.00 29.80 30.00 n $570.00 a-3 2 1/4 8 1/8 425.08/8V3550n $2,402.00 35.30 35.50 n $570.00 a-3 2 1/4 8 1/8 508.08/8V4000n $2,653.00 39.80 40.00 n $570.00 a-3 2 1/4 8 1/8 592.08/8V5300P $6,812.00 52.80 53.00 P $956.00 a-3 1/2 7 1/4 688.0


TYPE A

F

K

LOD

PD

all Drive Components products are manufactured in accordance with the material, dimensional and tolerance specifications established by Drive Components engineering. Drive Components manufacturing requirements equal or exceed current accepted industry standards. Compatibility with existing drive elements is a non issue.


FACTS






10/8V1250J $942.00 12.30 12.50 J $153.00 a-1 3 9/16 4 5/8 134.010/8V1320J $1,108.00 13.00 13.20 J $153.00 a-2 3 9/16 4 5/8 150.510/8V1400J $1,271.00 13.80 14.00 J $153.00 a-2 3 9/16 6 3/4 167.010/8V1500M $1,440.00 14.80 1.00 M $306.00 a-2 3 15/16 6 3/4 225.010/8V1600M $1,639.00 15.80 16.00 M $306.00 a-2 3 15/16 6 3/4 263.010/8V1700M $1,652.00 16.80 17.00 M $306.00 a-2 3 15/16 6 3/4 267.510/8V1800M $1,710.00 17.80 18.00 M $306.00 a-2 3 15/16 6 3/4 272.010/8V1900M $1,721.00 18.80 19.00 M $306.00 a-2 3 15/16 6 3/4 269.010/8V2000M $1,850.00 19.80 20.00 M $306.00 a-2 3 15/16 6 3/4 253.010/8V2120M $2,029.00 21.00 21.20 M $306.00 a-2 3 15/16 6 3/4 267.010/8V2240n $2,261.00 22.20 22.40 n $570.00 a-2 2 1/4 8 1/8 332.010/8V2480n $2,334.00 24.60 24.80 n $570.00 a-3 2 1/4 8 1/8 356.010/8V3000n $2,463.00 29.80 30.00 n $570.00 a-3 2 1/4 8 1/8 425.010/8V5300P $8,632.00 52.80 53.00 P $956.00 a-3 1 5/16 9 1/4 860.0


TYPE A

F

K

LOD

PD


10 8v 1250 J

number of Grooves

belt Cross section


QD bushing



# Weights as shown are approximate and in some cases may be calculated. Pulleys furnished with standard keyway and (1) 5/16-18 knurled point set screw.

Ak Fhp pulleys - Fixed bore

PaRT no

lisT PRiCe

DaTUM Dia* oD DiMensions WT (lbs)

sToCK boResa (4l) belTs

3l belTs

TYPe f l P C

aK17 $8.00 1.50 1.16 1.75 1 21/32 15/16 7/16 5/32 .40 1/2, 5/8aK20 $8.00 1.80 1.46 2.00 1 21/32 15/16 7/16 5/32 .53 1/2, 5/8, 3/4aK21 $8.00 1.90 1.56 2.10 1 21/32 15/16 7/16 5/32 .57 1/2, 5/8, 3/4aK22 $8.00 2.00 1.66 2.20 1 21/32 15/16 7/16 5/32 .60 1/2, 5/8, 3/4aK23 $9.00 2.10 1.76 2.30 1 21/32 15/16 7/16 5/32 .63 1/2, 5/8, 3/4aK25 $10.00 2.30 1.96 2.50 2 21/32 15/16 7/16 5/32 .73 1/2, 5/8, 3/4aK26 $10.00 2.40 2.06 2.60 2 21/32 15/16 7/16 5/32 .75 1/2, 5/8, 3/4aK27 $10.00 2.50 2.16 2.70 2 21/32 15/16 7/16 5/32 .83 1/2, 5/8, 3/4aK28 $10.00 2.60 2.26 2.80 2 21/32 15/16 7/16 5/32 .84 1/2, 5/8, 3/4aK30 $12.00 2.80 2.46 3.05 2 21/32 15/16 7/16 5/32 .98 1/2, 5/8, 3/4, 7/8aK32 $12.00 3.00 2.66 3.25 2 21/32 15/16 7/16 5/32 1.1 1/2, 5/8, 3/4, 7/8aK34 $13.00 3.20 2.86 3.45 2 21/32 15/16 7/16 5/32 1.2 1/2, 5/8, 3/4, 7/8aK39 $16.00 3.50 3.16 3.75 2 3/4 15/32 15/32 5/32 1.5 1/2, 5/8, 3/4, 7/8, 15/16, 1aK41 $19.00 3.70 3.36 3.95 2 3/4 15/32 15/32 1/16 1.8 1/2, 5/8, 3/4, 7/8, 15/16, 1aK44 $20.00 4.00 3.66 4.25 3 3/4 15/32 15/32 1/16 1.9 1/2, 5/8, 3/4, 7/8, 15/16, 1, 1 1/8aK46 $20.00 4.20 3.86 4.45 3 3/4 15/32 15/32 1/16 2.0 1/2, 5/8, 3/4, 7/8, 15/16, 1, 1 1/8aK49 $20.00 4.50 4.16 4.75 3 3/4 15/32 15/32 1/16 2.2 1/2, 5/8, 3/4, 7/8, 15/16, 1, 1 1/8aK51 $22.00 4.70 4.36 4.95 3 3/4 15/32 15/32 1/16 2.4 1/2, 5/8, 3/4, 7/8, 1, 1 1/8aK54 $22.00 5.00 4.66 5.25 3 3/4 15/32 15/32 1/16 2.6 1/2, 5/8, 3/4, 7/8, 15/16, 1, 1 1/8, 1 3/16aK56 $24.00 5.20 4.86 5.45 3 3/4 15/32 15/32 1/16 2.7 1/2, 5/8, 3/4, 7/8, 15/16, 1, 1 1/8, 1 3/16aK59 $24.00 5.50 5.16 5.75 3 3/4 15/32 15/32 1/16 2.9 1/2, 5/8, 3/4, 7/8, 15/16, 1, 1 1/8, 1 3/16aK61 $25.00 5.70 5.36 5.95 3 3/4 15/32 15/32 1/16 3.2 1/2, 5/8, 3/4, 7/8, 15/16, 1, 1 1/8, 1 3/16aK64 $26.00 6.00 5.66 6.25 3 3/4 15/32 15/32 1/16 3.0 1/2, 5/8, 3/4, 7/8, 15/16, 1, 1 1/8, 1 3/16aK66 $27.00 6.20 5.86 6.45 3 3/4 15/32 15/32 1/16 3.1 5/8, 3/4, 1, 1 1/8aK69 $29.00 6.50 6.16 6.75 3 3/4 23/32 23/32 0 3.5 3/4, 1 1/8aK71 $31.00 6.70 6.36 6.95 3 3/4 23/32 23/32 0 3.8 5/8, 3/4, 1, 1 1/8, 1 7/8aK74 $31.00 7.00 6.66 7.25 3 3/4 23/32 23/32 0 4.2 1/2, 5/8, 3/4, 7/8, 15/16, 1, 1 1/8, 1 3/16, 1 7/16aK79 $34.00 7.50 7.16 7.75 3 3/4 23/32 23/32 0 4.5 3/4, 1, 1 1/8, 1 7/16aK84 $38.00 8.00 7.66 8.25 3 3/4 23/32 23/32 0 5.0 1/2, 5/8, 3/4, 7/8, 15/16, 1, 1 3/16, 1 7/16aK89 $40.00 8.50 8.16 8.75 3 3/4 23/32 23/32 0 5.4 3/4, 1 1/8, 1 7/16aK94 $42.00 9.00 8.66 9.25 3 3/4 23/32 23/32 0 5.9 1/2, 5/8, 3/4, 7/8, 15/16, 1, 1 3/16, 1 1/4, 1 7/16aK99 $44.00 9.50 9.16 9.75 3 3/4 23/32 23/32 0 6.1 3/4, 1, 1 7/16aK104 $44.00 10.00 9.66 10.25 3 3/4 23/32 23/32 0 6.9 5/8, 3/4, 1, 1 3/16, 1 1/4, 1 3/8, 1 7/16aK109 $48.00 10.50 10.16 10.75 3 3/4 23/32 23/32 0 7.3 3/4, 1, 1 3/8, 1 7/16aK114 $49.00 11.00 10.66 11.25 3 3/4 23/32 23/32 0 7.4 3/4, 1, 1 3/16, 1 7/16aK124 $56.00 12.00 11.66 12.25 3 3/4 23/32 23/32 0 8.3 5/8, 3/4, 1, 1 3/16, 1 1/4, 1 7/16aK134 $67.00 13.00 12.66 13.25 3 3/4 23/32 23/32 0 9.3 3/4, 1, 1 3/16, 1 3/8, 1 7/16aK144 $74.00 14.00 13.66 14.25 3 3/4 23/32 23/32 0 10.8 3/4, 1, 1 3/16, 1 7/16aK154 $84.00 15.00 14.66 15.25 3 3/4 23/32 23/32 0 12.6 3/4, 1, 1 3/16, 1 3/8, 1 7/16aK184 $106.00 18.00 17.66 18.25 3 3/4 23/32 23/32 0 17.1 3/4, 1, 1 3/16, 1 7/16

TYPE 2 C

OD

PD

PF

TYPE 3L

C

OD

PD

PF

TYPE 1L L

P

C

OD

PD

F




bk Fhp pulleys - Fixed bore

PaRT no

lisT PRiCe



b (5l) belTs

TYPe f l P C

bK24 $11.00 1.80 2.20 2.40 1 4/5 1 1/16 13/32 5/32 .73 1/2, 5/8, 3/4bK25 $12.00 1.90 2.30 2.50 1 4/5 1 1/16 13/32 5/32 .74 1/2, 5/8, 3/4, 7/8bK26 $13.00 2.00 2.40 2.60 1 4/5 1 1/16 13/32 5/32 .80 1/2, 5/8, 3/4, 7/8bK27 $13.00 2.10 2.50 2.70 2 4/5 1 1/16 13/32 5/32 .84 1/2, 5/8, 3/4, 7/8bK28 $13.00 2.20 2.60 2.95 2 4/5 1 1/16 13/32 5/32 1.0 1/2, 5/8, 3/4, 7/8bK30 $14.00 2.40 2.80 3.15 2 4/5 1 1/16 13/32 5/32 1.2 1/2, 5/8, 3/4, 7/8bK32 $16.00 2.60 3.00 3.35 2 4/5 1 1/16 13/32 5/32 1.2 1/2, 5/8, 3/4, 7/8bK34 $18.00 2.80 3.20 3.55 2 7/8 1 5/32 13/32 1/8 1.7 1/2, 5/8, 3/4, 7/8, 1, 1 1/8bK36 $20.00 3.00 3.40 3.75 2 7/8 1 5/32 13/32 1/8 1.9 1/2, 5/8, 3/4, 7/8, 1, 1 1/8bK40 $20.00 3.20 3.60 3.95 2 7/8 1 5/32 13/32 1/8 2.1 1/2, 5/8, 3/4, 7/8, 1, 1 1/8bK45 $21.00 3.50 3.90 4.25 2 7/8 1 5/32 13/32 1/8 2.1 1/2, 5/8, 3/4, 7/8, 1, 1 1/8bK47 $22.00 3.70 4.10 4.45 2 7/8 1 5/32 13/32 1/8 2.2 1/2, 5/8, 3/4, 7/8, 1, 1 1/8bK50 $23.00 4.00 4.40 4.75 3 7/8 1 5/32 13/32 1/8 2.5 1/2, 5/8, 3/4, 7/8, 15/16, 1, 1 1/8bK52 $23.00 4.20 4.60 4.95 3 7/8 1 5/32 13/32 1/8 2.6 1/2, 5/8, 3/4, 7/8, 1, 1 1/8bK55 $24.00 4.50 4.90 5.25 3 7/8 1 5/32 13/32 1/8 3.0 1/2, 5/8, 3/4, 7/8, 1, 1 1/8, 1 3/16bK57 $25.00 4.70 5.10 5.45 3 7/8 1 5/32 13/32 1/8 3.1 5/8, 3/4, 7/8, 15/16, 1, 1 1/8, bK60 $26.00 5.00 5.40 5.75 3 7/8 1 5/32 13/32 1/8 3.4 1/2, 5/8, 3/4, 7/8, 1, 1 1/8, 1 3/16bK62 $26.00 5.20 5.60 5.95 3 7/8 1 5/32 13/32 1/8 3.6 1/2, 5/8, 3/4, 7/8, 15/16, 1, 1 1/8, 1 3/16bK65 $29.00 5.50 5.90 6.25 3 7/8 1 5/32 13/32 1/8 3.9 5/8, 3/4, 1, 1 1/8bK67 $30.00 5.70 6.10 6.45 3 7/8 1 5/32 13/32 1/8 3.7 5/8, 3/4, 1, 1 1/8bK70 $34.00 6.00 6.40 6.75 3 7/8 1 15/32 21/32 1/16 4.6 5/8, 3/4, 15/16, 1, 1 1/8, 1 3/16, 1 7/16bK72 $36.00 6.20 6.60 6.95 3 7/8 1 15/32 21/32 1/16 4.4 3/4, 1, 1 1/8, 1 3/8bK75 $37.00 6.50 6.90 7.25 3 7/8 1 15/32 21/32 1/16 4.6 3/4, 1, 1 1/8, 1 3/8bK77 $37.00 6.70 7.10 7.45 3 7/8 1 15/32 21/32 1/16 5.1 3/4, 1, 1 1/8, 1 3/8bK80 $38.00 7.00 7.40 7.75 3 7/8 1 15/32 21/32 1/16 5.4 5/8, 3/4, 7/8, 1, 1 1/8, 1 3/16, 1 3/8, 1 7/16bK85 $42.00 7.50 7.90 8.25 3 7/8 1 15/32 21/32 1/16 5.8 3/4, 1, 1 1/8, 1 3/8, 1 7/16bK90 $43.00 8.00 8.40 8.75 3 7/8 1 15/32 21/32 1/16 6.1 3/4, 7/8, 15/16, 1, 1 1/8, 1 3/16, 1 3/8, 1 7/16bK95 $46.00 8.50 8.90 9.25 3 7/8 1 15/32 21/32 1/16 7.0 3/4, 1, 1 1/8, 1 3/8, 1 7/16bK100 $48.00 9.00 9.40 9.75 3 7/8 1 15/32 21/32 1/16 7.4 3/4, 7/8, 15/16, 1, 1 1/8, 1 3/8, 1 3/16, 1 1/4, 1 7/16bK105 $52.00 9.50 9.90 10.25 3 7/8 1 15/32 21/32 1/16 8.0 1, 1 3/8, 1 7/16bK110 $55.00 10.00 10.40 10.75 3 7/8 1 15/32 21/32 1/16 8.5 3/4, 1, 1 1/8, 1 3/16, 1 3/8, 1 7/16bK115 $58.00 10.50 10.90 11.25 3 7/8 1 15/32 21/32 1/16 8.9 1, 1 3/8, 1 7/16bK120 $59.00 11.00 11.40 11.75 3 7/8 1 15/32 21/32 1/16 10.0 3/4, 1, 1 3/16, 1 3/8, 1 7/16bK130 $66.00 12.00 12.40 12.75 3 7/8 1 15/32 21/32 1/16 10.8 3/4, 1, 1 3/16, 1 3/8, 1 1/4, 1 7/16bK140 $84.00 13.00 13.40 13.75 3 7/8 1 15/32 21/32 1/16 12.1 3/4, 1, 1 3/16, 1 7/16bK160 $103.00 15.00 15.40 15.75 3 7/8 1 15/32 21/32 1/16 14.4 1, 1 1/8, 1 3/16, 1 1/4, 1 7/16bK190 $119.00 18.00 18.40 18.75 3 7/8 1 15/32 21/32 1/16 21.3 1, 1 3/16, 1 1 /4, 1 7/16

TYPE 2 C

OD

PD

PF

TYPE 3L

C

OD

PD

PF

TYPE 1L L

P

C

OD

PD

F




2Ak Fhp pulleys - Fixed bore

PaRT no

lisT PRiCe



3l belTs

TYPe f l P C

2aK20 $20.00 1.80 1.46 2.00 1 1 3/8 1 21/32 15/32 3/16 .83 1/2, 5/8, 3/42aK21 $21.00 1.90 1.56 2.15 1 1 3/8 1 21/32 15/32 3/16 .97 1/2, 5/8, 3/42aK22 $22.00 2.00 1.66 2.25 1 1 3/8 1 21/32 15/32 3/16 1.0 1/2, 5/8, 3/4, 7/82aK23 $23.00 2.10 1.76 2.35 1 1 3/8 1 21/32 15/32 3/16 1.1 5/8, 3/4, 7/8, 12aK25 $23.00 2.30 1.96 2.55 1 1 3/8 1 21/32 15/32 3/16 1.3 5/8, 3/4, 7/8, 12aK26 $24.00 2.40 2.06 2.65 1 1 3/8 1 21/32 15/32 3/16 1.4 5/8, 3/4, 7/8, 12aK27 $26.00 2.50 2.16 2.75 1 1 3/8 1 21/32 15/32 3/16 1.6 5/8, 3/4, 7/8, 12aK28 $28.00 2.60 2.26 2.85 1 1 3/8 1 21/32 15/32 3/16 1.7 5/8, 3/4, 7/8, 12aK30 $30.00 2.80 2.46 3.05 1 1 3/8 1 21/32 15/32 3/16 2.0 1/2, 5/8, 3/4, 7/8, 1, 1 1/82aK32 $34.00 3.00 2.66 3.25 1 1 3/8 1 21/32 15/32 3/16 2.3 5/8, 3/4, 7/8, 1, 1 1/82aK34 $35.00 3.20 2.86 3.45 1 1 3/8 1 21/32 15/32 1/2 2.5 5/8, 3/4, 7/8, 1, 1 1/82aK39 $36.00 3.50 3.16 3.75 2 1 3/8 1 11/32 15/32 1/2 2.6 5/8, 3/4, 7/8, 1, 1 1/82aK41 $40.00 3.70 3.36 3.95 2 1 3/8 1 11/32 15/32 1/2 2.8 5/8, 3/4, 7/8, 1, 1 1/82aK44 $41.00 4.00 3.66 4.25 2 1 3/8 1 11/32 15/32 1/2 3.2 5/8, 3/4, 7/8, 1, 1 1/82aK46 $43.00 4.20 3.86 4.45 2 1 3/8 1 11/32 15/32 1/2 2.9 7/8, 1, 1 1/82aK49 $44.00 4.50 4.16 4.75 2 1 3/8 1 11/32 15/32 1/2 3.2 3/4, 7/8, 1, 1 1/8, 1 3/82aK51 $45.00 4.70 4.36 4.95 2 1 3/8 1 11/32 15/32 1/2 3.4 3/4, 7/8, 1, 1 1/8, 1 3/82aK54 $45.00 5.00 4.66 5.25 3 1 3/8 1 11/32 15/32 1/2 3.7 5/8, 3/4, 7/8, 1, 1 1/8, 1 3/82aK56 $46.00 5.20 4.86 5.45 3 1 3/8 1 11/32 15/32 1/2 3.9 5/8, 3/4, 1, 1 1/8, 1 3/82aK59 $51.00 5.50 5.16 5.75 3 1 3/8 1 11/32 15/32 1/2 4.4 1, 1 1/8, 1 3/82aK61 $51.00 5.70 5.36 5.95 3 1 3/8 1 11/32 15/32 1/2 4.5 3/4, 7/8, 1, 1 1/8, 1 3/82aK64 $54.00 6.00 5.66 6.25 3 1 3/8 1 19/32 11/32 1/8 5.2 3/4, 1, 1 1/8, 1 3/16, 1 3/8, 1 7/162aK74 $61.00 7.00 6.66 7.25 3 1 3/8 1 19/32 11/32 1/8 6.0 3/4, 1, 1 1/8, 1 3/16, 1 3/8, 1 7/162aK84 $67.00 8.00 7.66 8.25 3 1 3/8 1 19/32 11/32 1/8 7.0 3/4, 15/16, 1, 1 1/8, 1 3/16, 1 3/8, 1 7/162aK94 $73.00 9.00 8.66 9.25 3 1 3/8 1 19/32 11/32 1/8 8.2 3/4, 1, 1 1/8, 1 3/16, 1 3/8, 1 7/162aK104 $78.00 10.00 9.66 10.25 3 1 3/8 1 19/32 11/32 1/8 9.6 3/4, 15/16, 1, 1 7/162aK114 $85.00 11.00 10.66 11.25 3 1 3/8 1 19/32 11/32 1/8 11.2 3/4, 1, 1 3/16, 1 3/8, 1 7/162aK124 $93.00 12.00 11.66 12.25 3 1 3/8 1 19/32 11/32 1/8 12.1 3/4, 1, 1 3/16, 1 7/162aK134 $110.00 13.00 12.66 13.25 3 1 3/8 1 19/32 11/32 1/8 13.6 1 3/16, 1 7/162aK144 $116.00 14.00 13.66 14.25 3 1 3/8 1 19/32 11/32 1/8 14.6 1, 1 7/162aK154 $134.00 16.00 14.66 15.25 3 1 3/8 1 19/32 11/32 1/8 16.5 1 3/16, 1 7/162aK184 $167.00 18.00 17.66 18.25 3 1 3/8 1 19/32 11/32 1/8 22.7 1 3/16, 1 7/16

TYPE 2 C

OD

PD

PF

TYPE 3L

C

OD

PD

PF

TYPE 1L L

P

C

OD

PD

F




2bk Fhp pulleys - Fixed bore

PaRT no

lisT PRiCe



b (5l) belTs

TYPe f l P C

2bK25 $29.00 1.90 2.30 2.50 1 1 3/4 1 31/32 15/32 1/4 1.5 1/2, 5/8, 3/4, 7/82bK27 $30.00 2.10 2.50 2.70 1 1 3/4 1 31/32 15/32 1/4 1.7 1/2, 5/8, 3/4, 7/82bK28 $32.00 2.20 2.60 2.95 1 1 3/4 1 31/32 15/32 1/4 2.1 1/2, 5/8, 3/4, 7/8, 1, 1 1/82bK30 $35.00 2.40 2.80 3.15 1 1 3/4 1 31/32 15/32 1/4 2.3 1/2, 5/8, 3/4, 7/8, 1, 1 1/82bK32 $36.00 2.60 3.00 3.35 1 1 3/4 1 31/32 15/32 1/4 2.7 5/8, 7/8, 1, 1 1/82bK34 $37.00 2.80 3.20 3.55 1 1 3/4 1 31/32 15/32 1/4 3.1 5/8, 3/4, 7/8, 1, 1 1/82bK36 $38.00 3.00 3.40 3.75 1 1 3/4 1 31/32 15/32 1/4 3.4 3/4, 7/8, 1, 1 1/8, 1 3/82bK40 $40.00 3.20 3.60 3.95 2 1 3/4 1 15/32 15/32 3/4 3.4 5/8, 3/4, 7/8, 1, 1 1/82bK45 $43.00 3.50 3.90 4.25 2 1 3/4 1 15/32 15/32 3/4 4.0 1, 1 1/8, 1 3/82bK47 $43.00 3.70 4.10 4.45 2 1 3/4 1 15/32 15/32 3/4 4.2 7/8, 1, 1 1/82bK50 $46.00 4.00 4.40 4.75 2 1 3/4 1 15/32 15/32 3/4 4.8 3/4, 1, 1 1/8,1 3/82bK52 $46.00 4.20 4.60 4.95 2 1 3/4 1 15/32 15/32 3/4 5.2 7/8, 1, 1 1/8, 1 3/82bK55 $50.00 4.50 4.90 5.25 2 1 3/4 1 15/32 15/32 3/4 5.8 1 1/8,1 3/82bK57 $51.00 4.70 5.10 5.45 2 1 3/4 1 15/32 15/32 3/4 5.4 1, 1 1/8,1 3/82bK60 $53.00 5.00 5.40 5.75 3 1 3/4 1 15/32 15/32 3/4 5.7 3/4, 7/8, 1, 1 1/8, 1 3/82bK62 $55.00 5.20 5.60 5.95 3 1 3/4 1 15/32 15/32 3/4 6.0 1, 1 1/8, 1 3/82bK65 $58.00 5.50 5.90 6.25 3 1 3/4 1 15/32 15/32 3/4 6.5 1, 1 1/8, 1 3/82bK67 $61.00 5.70 6.10 6.45 3 1 3/4 1 15/32 15/32 3/4 6.8 1, 1 1/8, 1 3/82bK70 $68.00 6.00 6.40 6.75 3 1 3/4 1 19/32 11/32 1/2 7.6 3/4, 1, 1 1/8, 1 3/16, 1 3/8, 1 7/162bK80 $72.00 7.00 7.40 7.75 3 1 3/4 1 19/32 11/32 1/2 8.7 3/4, 1, 1 1/8, 1 3/16, 1 3/8, 1 7/162bK90 $74.00 8.00 8.40 8.75 3 1 3/4 1 19/32 11/32 1/2 10.0 3/4, 1, 1 1/8, 1 3/16, 1 3/8, 1 7/162bK100 $88.00 9.00 9.40 9.75 3 1 3/4 1 19/32 11/32 1/2 11.8 3/4, 1, 1 3/16, 1 3/8, 1 7/162bK110 $93.00 10.00 10.40 10.75 3 1 3/4 1 19/32 11/32 1/2 14.0 1, 1 3/16, 1 7/162bK120 $101.00 11.00 11.40 11.75 3 1 3/4 1 19/32 11/32 1/2 15.6 1, 1 3/16, 1 7/162bK130 $113.00 12.00 12.40 12.75 3 1 3/4 1 19/32 11/32 1/2 17.0 1, 1 3/16, 1 7/162bK140 $119.00 13.00 13.40 13.75 3 1 3/4 1 19/32 11/32 1/2 19.0 1, 1 3/16, 1 7/162bK160 $142.00 15.00 15.40 15.75 3 1 3/4 1 19/32 11/32 1/2 23.7 1, 1 3/16, 1 7/162bK190 $182.00 18.00 18.40 18.75 3 1 3/4 1 19/32 11/32 1/2 30.3 1 3/16, 1 7/16

TYPE 2 C

OD

PD

PF

TYPE 3L

C

OD

PD

PF

TYPE 1L L

P

CO

D

PD

F

Rework charges will apply to reboring, new and/or multiple keyways, additional and/or larger set screws and dynamic balancing. Contact Drive Components for price and delivery.


FACTS



Akh Fhp pulleys - Qd h bushing§

PaRT no

lisT PRiCe

DaTUM Dia* oD DiMensions WT (lbs)a (4l)

belTs3l

belTsTYPe ol f l P X G e

aK30H $15.00 2.80 2.46 3.05 1 1 13/16 3/4 1 1/4 7/8 1 3/16 7/16 3/16 1.20aK32H $18.00 3.00 2.66 3.25 1 1 13/16 3/4 1 1/4 7/8 1 1/5 7/16 3/16 1.30aK34H $19.00 3.20 2.86 3.45 2 1 1/2 3/4 1 1/4 9/16 7/8 7/16 3/16 1.40aK39H $20.00 3.50 3.16 3.75 2 1 1/2 3/4 1 1/4 9/16 7/8 7/16 3/16 1.50aK41H $20.00 3.70 3.36 3.95 2 1 1/2 3/4 1 1/4 9/16 7/8 7/16 3/16 1.80aK44H $20.00 4.00 3.66 4.25 2 1 1/2 3/4 1 1/4 9/16 7/8 7/16 3/16 2.00aK46H $21.00 4.20 3.86 4.45 2 1 1/2 3/4 1 1/4 9/16 7/8 7/16 3/16 2.30aK49H $21.00 4.50 4.16 4.75 2 1 1/2 3/4 1 1/4 9/16 7/8 7/16 3/16 2.60aK51H $21.00 4.70 4.36 4.95 2 1 1/2 3/4 1 1/4 9/16 7/8 7/16 3/16 2.70aK54H $21.00 5.00 4.66 5.25 2 1 1/2 3/4 1 1/4 9/16 7/8 7/16 3/16 2.60aK56H $22.00 5.20 4.86 5.45 2 1 1/2 3/4 1 1/4 9/16 7/8 7/16 3/16 2.80aK59H $22.00 5.50 5.16 5.75 2 1 1/2 3/4 1 1/4 9/16 7/8 7/16 3/16 3.00aK61H $22.00 5.70 5.36 5.95 3 1 1/2 3/4 1 1/4 9/16 7/8 7/16 3/16 3.10aK64H $23.00 6.00 5.66 6.25 3 1 1/2 3/4 1 1/4 9/16 7/8 7/16 3/16 3.30aK66H $24.00 6.20 5.86 6.45 3 1 1/2 3/4 1 1/4 9/16 7/8 7/16 3/16 3.60aK69H $26.00 6.50 6.16 6.75 3 1 1/2 3/4 1 1/4 9/16 7/8 7/16 3/16 3.50aK71H $28.00 6.70 6.36 6.95 3 1 1/2 3/4 1 1/4 9/16 7/8 7/16 3/16 3.50aK74H $29.00 7.00 6.66 7.25 3 1 1/2 3/4 1 1/4 9/16 7/8 7/16 3/16 3.80aK79H $31.00 7.50 7.16 7.75 3 1 1/2 3/4 1 1/4 9/16 7/8 7/16 3/16 4.20aK84H $33.00 8.00 7.66 8.25 3 1 1/2 3/4 1 1/4 9/16 7/8 7/16 3/16 4.60aK89H $36.00 8.50 8.16 8.75 3 1 1/2 3/4 1 1/4 9/16 7/8 7/16 3/16 4.80aK94H $39.00 9.00 8.66 9.25 3 1 1/2 3/4 1 1/4 9/16 7/8 7/16 3/16 5.60aK99H $41.00 9.50 9.16 9.75 3 1 1/2 3/4 1 1/4 9/16 7/8 7/16 3/16 5.90aK104H $42.00 10.00 9.66 10.25 3 1 1/2 3/4 1 1/4 9/16 7/8 7/16 3/16 6.80aK109H $46.00 10.50 10.16 10.75 3 1 1/2 3/4 1 1/4 9/16 7/8 7/16 3/16 7.10aK114H $45.00 11.00 10.66 11.25 3 1 1/2 3/4 1 1/4 9/16 7/8 7/16 3/16 7.50aK124H $50.00 12.00 11.66 12.25 3 1 1/2 3/4 1 1/4 9/16 7/8 7/16 3/16 8.00aK134H $57.00 13.00 12.66 13.25 3 1 1/2 3/4 1 1/4 9/16 7/8 7/16 3/16 10.70aK144H $64.00 14.00 13.66 14.25 3 1 1/2 3/4 1 1/4 9/16 7/8 7/16 3/16 11.10aK154H $71.00 15.00 14.66 15.25 3 1 1/2 3/4 1 1/4 9/16 7/8 7/16 3/16 12.50aK184H $84.00 18.00 17.66 18.25 3 1 1/2 3/4 1 1/4 9/16 7/8 7/16 3/16 17.30

TYPE 3

TYPE 1

OL

P

OD

PD

F

GX

L E

P

OD

PD

F

OL

GX

L E

TYPE 2

P

OD

PD

F

OL

GX

L E

* Pitch Diameter• AllDimensionsareininches§ h bushing list price $8.00



bkh Fhp pulleys - Qd h bushing§

PaRT no

lisT PRiCe

DaTUM Dia* oD DiMensions WT (lbs)a (4l) belTs b (5l) belTs TYPe ol f l P X G e

bK30H $21.00 2.40 2.80 3.15 1 1 15/16 7/8 1 1/4 7/8 1 7/16 3/16 1.4bK32H $23.00 2.60 3.00 3.35 1 1 15/16 7/8 1 1/4 7/8 1 7/16 3/16 1.6bK34H $23.00 2.80 3.20 3.55 1 2 7/8 1 1/4 7/8 1 7/16 3/16 1.8bK36H $23.00 3.00 3.40 3.35 2 1 1/2 7/8 1 1/4 7/16 7/8 7/16 3/16 1.5bK40H $23.00 3.20 3.60 3.95 2 1 1/2 7/8 1 1/4 7/16 7/8 7/16 3/16 1.7bK45H $24.00 3.50 3.90 4.25 2 1 1/2 7/8 1 1/4 7/16 7/8 7/16 3/16 2.1bK47H $24.00 3.70 4.10 4.45 2 1 1/2 7/8 1 1/4 7/16 7/8 7/16 3/16 2.3bK50H $25.00 4.00 4.40 4.75 2 1 1/2 7/8 1 1/4 7/16 7/8 7/16 3/16 2.7bK52H $25.00 4.20 4.60 4.95 2 1 1/2 7/8 1 1/4 7/16 7/8 7/16 3/16 3.0bK55H $26.00 4.50 4.90 5.25 2 1 1/2 7/8 1 1/4 7/16 7/8 7/16 3/16 3.5bK57H $26.00 4.70 5.10 5.45 2 1 1/2 7/8 1 1/4 7/16 7/8 7/16 3/16 3.6bK60H $26.00 5.00 5.40 5.75 2 1 1/2 7/8 1 1/4 7/16 7/8 7/16 3/16 3.5bK62H $28.00 5.20 5.60 5.95 2 1 1/2 7/8 1 1/4 7/16 7/8 7/16 3/16 3.7bK65H $30.00 5.50 5.90 6.25 2 1 1/2 7/8 1 1/4 7/16 7/8 7/16 3/16 4.0bK67H $31.00 5.70 6.10 6.45 2 1 1/2 7/8 1 1/4 7/16 7/8 7/16 3/16 4.0bK70H $32.00 6.00 6.40 6.75 3 1 4/7 7/8 1 1/4 1/2 7/8 7/16 3/16 4.7bK72H $33.00 6.20 6.60 6.95 3 1 4/7 7/8 1 1/4 1/2 7/8 7/16 3/16 4.7bK75H $34.00 6.50 6.90 7.25 3 1 4/7 7/8 1 1/4 1/2 7/8 7/16 3/16 4.7bK77H $35.00 6.70 7.10 7.45 3 1 4/7 7/8 1 1/4 1/2 7/8 7/16 3/16 4.8bK80H $36.00 7.00 7.40 7.75 3 1 4/7 7/8 1 1/4 1/2 7/8 7/16 3/16 5.3bK85H $39.00 7.50 7.90 8.25 3 1 4/7 7/8 1 1/4 1/2 7/8 7/16 3/16 5.5bK90H $42.00 8.00 8.40 8.75 3 1 4/7 7/8 1 1/4 1/2 7/8 7/16 3/16 6.0bK95H $45.00 8.50 8.90 9.25 3 1 4/7 7/8 1 1/4 1/2 7/8 7/16 3/16 6.7bK100H $47.00 9.00 9.40 9.75 3 1 4/7 7/8 1 1/4 1/2 7/8 7/16 3/16 7.1bK105H $48.00 9.50 9.90 10.25 3 1 4/7 7/8 1 1/4 1/2 7/8 7/16 3/16 7.5bK110H $52.00 10.00 10.40 10.75 3 1 4/7 7/8 1 1/4 1/2 7/8 7/16 3/16 8.6bK115H $53.00 10.50 10.90 11.25 3 1 4/7 7/8 1 1/4 1/2 7/8 7/16 3/16 8.8bK120H $57.00 11.00 11.40 11.75 3 1 4/7 7/8 1 1/4 1/2 7/8 7/16 3/16 9.2bK130H $62.00 12.00 12.40 12.75 3 1 4/7 7/8 1 1/4 1/2 7/8 7/16 3/16 10.6bK140H $71.00 13.00 13.40 13.75 3 1 4/7 7/8 1 1/4 1/2 7/8 7/16 3/16 12.9bK150H $77.00 14.00 14.40 14.75 3 1 4/7 7/8 1 1/4 1/2 7/8 7/16 3/16 14.4bK160H $83.00 15.00 15.40 15.75 3 1 9/16 7/8 1 1/4 1/2 7/8 7/16 3/16 15.5bK190H $113.00 18.00 18.40 18.75 3 1 9/16 7/8 1 1/4 1/2 7/8 7/16 3/16 21.1

TYPE 3

TYPE 1

OL

P

OD

PD

F

GX

L E

P

OD

PD

F

OL

GX

L E

TYPE 2

P

OD

PD

F

OL

GX

L E




2Akh Fhp pulleys - Qd h bushing§

PaRT no

lisT PRiCe

DaTUM Dia* oD DiMensions WT (lbs)a (4l)

belTs3l

belTsTYPe ol f l P X G e

2aK30H $32.00 2.80 2.46 3.05 1 2 7/16 1 3/8 1 1/4 7/8 7/8 7/16 3/16 1.702aK32H $36.00 3.00 2.66 3.25 1 2 7/16 1 3/8 1 1/4 7/8 7/8 7/16 3/16 1.802aK34H $36.00 3.20 2.86 3.45 1 2 1 3/8 1 1/4 7/8 7/8 7/16 3/16 1.702aK39H $37.00 3.50 3.16 3.75 1 2 1 3/8 1 1/4 7/8 7/8 7/16 3/16 2.102aK41H $41.00 3.70 3.36 3.95 2 1 1/2 1 3/8 1 1/4 1/16 7/8 7/16 3/16 2.402aK44H $42.00 4.00 3.66 4.25 2 1 1/2 1 3/8 1 1/4 1/16 7/8 7/16 3/16 2.902aK46H $44.00 4.20 3.86 4.45 2 1 1/2 1 3/8 1 1/4 1/16 7/8 7/16 3/16 3.202aK49H $45.00 4.50 4.16 4.75 2 1 1/2 1 3/8 1 1/4 1/16 7/8 7/16 3/16 3.702aK51H $46.00 4.70 4.36 4.95 2 1 1/2 1 3/8 1 1/4 1/16 7/8 7/16 3/16 3.202aK54H $49.00 5.00 4.66 5.25 2 1 1/2 1 3/8 1 1/4 1/16 7/8 7/16 3/16 3.502aK56H $49.00 5.20 4.86 5.45 2 1 1/2 1 3/8 1 1/4 1/16 7/8 7/16 3/16 3.802aK59H $49.00 5.50 5.16 5.75 3 1 1/2 1 3/8 1 1/4 1/16 7/8 7/16 3/16 4.102aK61H $50.00 5.70 5.36 5.95 3 1 1/2 1 3/8 1 1/4 1/16 7/8 7/16 3/16 4.302aK64H $53.00 6.00 5.66 6.25 3 1 1/2 1 3/8 1 1/4 1/16 7/8 7/16 3/16 4.602aK74H $59.00 7.00 6.66 7.25 3 1 1/2 1 3/8 1 1/4 1/16 7/8 7/16 3/16 5.102aK84H $66.00 8.00 7.66 8.25 3 1 1/2 1 3/8 1 1/4 1/16 7/8 7/16 3/16 6.102aK94H $71.00 9.00 8.66 9.25 3 1 1/2 1 3/8 1 1/4 1/16 7/8 7/16 3/16 7.402aK104H $74.00 10.00 9.66 10.25 3 1 1/2 1 3/8 1 1/4 1/16 7/8 7/16 3/16 9.202aK114H $82.00 11.00 10.66 11.25 3 1 1/2 1 3/8 1 1/4 1/16 7/8 7/16 3/16 10.002aK124H $87.00 12.00 11.66 12.25 3 1 1/2 1 3/8 1 1/4 1/16 7/8 7/16 3/16 10.902aK134H $92.00 13.00 12.66 13.25 3 1 1/2 1 3/8 1 1/4 1/16 7/8 7/16 3/16 13.102aK144H $97.00 14.00 13.66 14.25 3 1 1/2 1 3/8 1 1/4 1/16 7/8 7/16 3/16 14.602aK154H $109.00 15.00 14.66 15.25 3 1 1/2 1 3/8 1 1/4 1/16 7/8 7/16 3/16 16.202aK184H $143.00 18.00 17.66 18.25 3 1 1/2 1 3/8 1 1/4 1/16 7/8 7/16 3/16 21.60

TYPE 1

OL

P

OD

PD

F

GX

EL

TYPE 2

OD

PD

F

OLG

X

EL

TYPE 3

OD

PD

F

OLG

X

E

P

L


Dimensions shown for light duty and variable pitch pulleys on pages 40 through 49 are for reference purposes only and are subject to change without notice. Where space requirements are critical, contact Drive Components for certified specifications.



2bkh Fhp pulleys - Qd h bushing§

PaRT no

lisT PRiCe

DaTUM Dia* oD DiMensions WT (lbs)a (4l) belTs b (5l) belTs TYPe ol f l P X G e

2bK32H $39.00 2.60 3.00 3.35 1 2 13/16 1 3/4 1 1/4 7/8 7/8 7/16 3/16 2.52bK34H $39.00 2.80 3.20 3.55 1 2 13/16 1 3/4 1 1/4 7/8 7/8 7/16 3/16 2.82bK36H $40.00 3.00 3.40 3.75 1 2 3/8 1 3/4 1 1/4 7/16 7/8 7/16 3/16 2.62bK40H $40.00 3.20 3.60 3.95 1 2 3/8 1 3/4 1 1/4 7/16 7/8 7/16 3/16 3.02bK45H $42.00 3.50 3.90 4.25 1 2 3/8 1 3/4 1 1/4 7/16 7/8 7/16 3/16 3.42bK47H $46.00 3.70 4.10 4.45 2 1 3/4 1 3/4 1 1/4 7/16 7/8 7/16 3/16 3.82bK50H $47.00 4.00 4.40 4.75 2 1 3/4 1 3/4 1 1/4 7/16 7/8 7/16 3/16 4.42bK52H $48.00 4.20 4.60 4.95 2 1 3/4 1 3/4 1 1/4 7/16 7/8 7/16 3/16 4.82bK55H $52.00 4.50 4.90 5.25 2 1 3/4 1 3/4 1 1/4 7/16 7/8 7/16 3/16 5.42bK57H $53.00 4.70 5.10 5.45 2 1 3/4 1 3/4 1 1/4 7/16 7/8 7/16 3/16 5.32bK60H $54.00 5.00 5.40 5.75 2 1 3/4 1 3/4 1 1/4 7/16 7/8 7/16 3/16 5.62bK62H $54.00 5.20 5.60 5.95 2 1 3/4 1 3/4 1 1/4 7/16 7/8 7/16 3/16 5.82bK65H $59.00 5.50 5.90 6.25 3 1 3/4 1 3/4 1 1/4 7/16 7/8 7/16 3/16 6.42bK67H $59.00 5.70 6.10 6.45 3 1 3/4 1 3/4 1 1/4 7/16 7/8 7/16 3/16 6.72bK70H $61.00 6.00 6.40 6.75 3 1 3/4 1 3/4 1 1/4 7/16 7/8 7/16 3/16 7.22bK80H $71.00 7.00 7.40 7.75 3 1 3/4 1 3/4 1 1/4 7/16 7/8 7/16 3/16 8.32bK90H $73.00 8.00 8.40 8.75 3 1 3/4 1 3/4 1 1/4 7/16 7/8 7/16 3/16 9.82bK100H $84.00 9.00 9.40 9.75 3 1 3/4 1 3/4 1 1/4 7/16 7/8 7/16 3/16 11.52bK110H $91.00 10.00 10.00 10.75 3 1 3/4 1 3/4 1 1/4 7/16 7/8 7/16 3/16 13.62bK120H $104.00 11.00 11.00 11.75 3 1 3/4 1 3/4 1 1/4 7/16 7/8 7/16 3/16 15.02bK130H $112.00 12.00 12.00 12.75 3 1 3/4 1 3/4 1 1/4 7/16 7/8 7/16 3/16 16.72bK140H $127.00 13.00 13.00 13.75 3 1 3/4 1 3/4 1 1/4 7/16 7/8 7/16 3/16 19.82bK150H $129.00 14.00 14.40 14.75 3 1 3/4 1 3/4 1 1/4 7/16 7/8 7/16 3/16 22.22bK160H $133.00 15.00 15.00 15.75 3 1 3/4 1 3/4 1 1/4 7/16 7/8 7/16 3/16 24.52bK190H $149.00 18.00 18.00 18.75 3 1 3/4 1 3/4 1 1/4 7/16 7/8 7/16 3/16 26.0

TYPE 1

OL

P

OD

PDF

GX

EL

TYPE 2

OD

PD

F

OLG

X

EL

TYPE 3

OD

PD

F

OLG

X

E

P

L


§ h bushing list price $8.00


# Weights as shown are approximate and in some cases may be calculated.§ Pulleys furnished with standard keyway and (2) 5/16-18 knurled point set screws.

1vp, 2vp vAriAble pitch pulleys - Fixed bore

1 GRooVePaRT no

lisT PRiCe

oD flanGe TRaVel DiMensions sToCK boRes WT (lbs)l K HDf MaX f Min G MaX G Min

1VP25 $18.00 2.380 0.810 0.560 0.630 0.380 1.590 0.620 2.00 1/2, 5/8, 3/4 1.01VP30 $18.00 2.870 0.810 0.560 0.630 0.380 1.660 0.630 2.13 1/2, 5/8, 3/4 1.41VP34 $23.00 3.150 1.000 0.690 0.810 0.500 1.880 0.780 2.13 1/2, 5/8, 3/4 1.5

2.38 7/8, 1, 1 1/8 1.71VP40 $24.00 3.750 1.060 0.690 0.880 0.500 1.880 0.660 2.13 1/2, 5/8, 3/4 2.0

2.38 7/8, 1, 1 1/8 2.01VP44 $25.00 4.150 1.060 0.690 0.880 0.500 1.880 0.660 2.13 1/2, 5/8, 3/4 2.2

2.38 7/8, 1, 1 1/8 2.21VP50 $30.00 4.750 1.060 0.690 0.880 0.500 2.000 0.780 2.13 1/2, 5/8, 3/4 2.7

2.38 7/8, 1, 1 1/8 2.81VP56 $44.00 5.350 1.060 0.690 0.880 0.500 2.000 0.780 2.38 1/2, 5/8, 3/4, 7/8, 1 1/8 3.41VP60 $69.00 6.000 1.250 0.880 1.031 0.660 2.160 0.850 2.62 5/8, 3/4, 7/8, 1 1/8 4.6

3.29 1 3/8, 1 5/8 5.31VP62 $70.00 5.950 1.300 0.750 0.880 0.500 2.000 0.780 2.62 5/8, 3/4, 7/8, 1, 1 1/8 4.6

3.29 1 3/8 5.11VP65 $73.00 6.500 1.250 0.880 1.030 0.660 2.160 0.850 2.62 5/8, 3/4, 7/8, 1, 1 1/8 5.3

3.29 1 1/4, 1 3/8 5.81VP68 $75.00 6.550 1.300 0.750 0.880 0.500 2.000 0.780 2.62 5/8, 3/4, 7/8, 1, 1 1/8 5.2

3.29 1 1/4, 1 3/8 5.81VP71 $77.00 7.100 1.250 0.880 1.030 0.660 2.160 0.850 2.62 5/8, 3/4, 7/8, 1, 1 1/8 6.5

3.29 1 3/8, 1 5/8 6.81VP75 $103.00 7.500 1.250 0.880 1.030 0.660 2.160 0.850 2.62 5/8, 3/4, 7/8, 1, 1 1/8 7.0

3.29 1 3/8, 1 5/8 7.6

2 GRooVe2VP36 $56.00 3.350 2.000 1.380 0.810 0.500 3.000 1.190 2.62 1/2, 5/8, 3/4, 7/8, 1, 1 1/8 3.82VP42 $64.00 3.950 2.130 1.380 0.880 0.500 3.000 1.190 2.62 5/8, 3/4, 7/8, 1, 1 1/8 4.72VP50 $73.00 4.750 2.130 1.380 0.880 0.500 3.000 1.190 2.75 5/8, 3/4, 7/8, 1, 1 1/8 6.32VP56 $86.00 5.350 2.130 1.380 0.880 0.500 3.000 1.190 2.75 5/8, 3/4, 7/8, 1, 1 1/8 7.7

3.29 1 3/8, 1 5/8 8.02VP60 $110.00 6.000 2.380 1.630 1.030 0.660 3.250 1.250 2.75 3/4, 7/8, 1, 1 1/8 9.8

3.29 1 3/8, 1 5/8 9.82VP62 $114.00 5.950 2.300 1.380 0.880 0.500 3.000 1.190 2.75 3/4, 7/8, 1, 1 1/8 9.0

3.29 1 3/8, 1 5/8 9.42VP65 $118.00 6.500 2.380 1.630 1.030 0.660 3.250 1.250 2.75 3/4, 7/8, 1, 1 1/8 11.0

3.29 1 3/8, 1 5/8 12.22VP68 $122.00 6.550 2.130 1.380 0.880 0.500 3.000 1.190 2.75 5/8, 3/4, 7/8, 1, 1 1/8 10.4

3.29 1 1/4, 1 3/8, 1 5/8 10.92VP71 $125.00 7.100 2.380 1.630 1.030 0.660 3.250 1.250 2.75 3/4, 7/8, 1 1/8 13.4

3.29 1 3/8, 1 5/8 14.32VP75 $185.00 7.500 2.380 1.630 1.030 0.660 3.250 1.250 2.75 3/4, 7/8, 1 1/8 14.6

3.29 1 3/8, 1 5/8 15.0

OD

1VP

KFminGmin

Gmax

Fmax

L

OD

HD

K

2VP

FminGmin

Gmax

Fmax

L

HD

• AllDimensionsareininches


light duty vAriAble pitch pulleys - Fixed bore

lT DUTY VP PUlleY 1Vl 1VMPaRT no

lisT PRiCe

oD flanGe TRaVel DiMensions sToCK boRes WT (lbs)l K HDf MaX f Min G MaX G Min

1Vl25 $12.00 2.500 0.781 0.531 0.625 0.375 1.634 0.697 1.125 1/2, 5/8 .851Vl30 $13.00 2.870 0.781 0.531 0.628 0.375 1.634 0.697 1.125 1/2, 5/8 1.11Vl34 $14.00 3.150 1.000 0.625 0.875 0.500 1.933 0.744 1.125 1/2, 5/8 1.1

1.375 3/4 1.31Vl40 $16.00 3.750 1.000 0.625 0.875 0.500 1.933 0.744 1.125 1/2, 5/8 1.5

1.375 3/4, 7/8 1.51Vl44 $19.00 4.150 1.000 0.625 0.875 0.500 1.933 0.744 1.125 1/2, 5/8 1.6

1.375 3/4, 7/8 1.71VM50 $32.00 4.750 1.060 0.688 0.875 0.500 1.996 0.776 1.125 1/2, 5/8 2.4

1.375 3/4, 7/8 2.4

lT DUTY PUlleYs al aMPaRT no lisT PRiCe oD DaTUM Dia* DiMensions sToCK boRes WT (lbs)

f l P

al54 $15.00 4.93 4.78 0.593 1.062 0.468 5/8, 3/4, 1 1.2al64 $16.00 5.93 5.78 0.593 1.062 0.468 5/8, 3/4, 1 1.4al74 $18.00 6.93 6.78 0.593 1.062 0.468 5/8, 3/4, 1 1.7al84 $21.00 7.93 7.78 0.593 1.062 0.468 5/8, 3/4, 1 1.9al94 $26.00 8.93 8.78 0.593 1.062 0.468 3/4, 1 2.6al104 $29.00 9.93 9.78 0.593 1.062 0.468 3/4, 1 3.0al114 $32.00 10.93 10.78 0.593 1.062 0.468 3/4, 1 3.5al124 $38.00 11.93 11.78 0.593 1.062 0.468 3/4, 1 4.0aM144 $62.00 14.16 14.00 0.687 1.750 0.406 1 5.2

3/4, 7/8 2.4

VL

Fmax

Gmax

HD

Gmin

FminL

F

L

OD

PD

P

Weights as shown are approximate and in some cases may be calculated. Vl & VM pulleys are suitable for use with 3l, 4l(a), and 5l(b) belts.al & aM pulleys are suitable for use with 3l and 4l(a) belts.Vl, VMal, and aM pulleys furnished with standard keyway and (1) 5/16-18 knurled point set screw.

* Pitch Dia• AllDimensionsareininches


CHaRT aQD bushing Torque fT/lb

H 5

Ja 5

sH 9

sDs 9

sD 9

sK 15

sf 30

e 60

f 75

J 135

M 225

n 300

P 450

W 600

do not exceed the torQue vAlues shown. sheAve hub And/or bushing FlAnge breAkAge cAn occur.removing1. loosen and remove all three (3) mounting bolts.2. insert all three (3) mounting bolts in the drilled and tapped holes in the sheave (conventional mount) or the three (3) drilled and tapped holes in the bushing flange (reverse mount).3. alternately tighten each bolt until the tapers have disengaged and the units can be separated and removed.

in some cases it may be necessary to insert a wedge into the saw cut to break the bushings’ grip on the shaft.

Conventional Mount Reverse Mount

Qd* bushing instAllAtion instructionsQd bushings can be assembled in one of two (2) ways:1. Conventional mount with the flange of the bushing “inboard” ie: closest to the driveR or the driven piece of equipment.2. Reverse mount with the flange of the bushing “outboard”. This is typically used where alignment issues require it or on small sheaves with blind holes (not drilled through).

in either case, the following procedures should be followed:1. Use no lubricant on either the bushing tapered surface or the sheave tapped bore. be sure they are clean of dirt, paint, etc.2. for conventional mounting, line up the three (3) drilled holes in the sheave with the three (3) drilled and tapped holes in the bushing. 3. for reverse mount, line up the three (3) drilled holes in the bushing with the three (3) drilled and tapped holes in the sheave.4. With the key in place, slide the bushing on the shaft (conventional mount) and then the sheave onto the bushing, or if reverse mounting, the bushing/sheave unit.5. alternately tighten the mounting bolts until the bushing has “gripped” the shaft. Check and establish alignment and adjust the unit’s position on the shaft accordingly.6. Continue alternately tightening the mounting bolts to the torque values shown in chart a.7. Tighten the set screw down on the key.8. after the drive has run for approximately one (1) hour, check the mounting bolts and retighten to the torque values show.

noteThere should be a slight gap between the bushing flange and the sheave. if there is no gap, either the shaft is undersized or the bushing bore is oversized. in either case, the bushing “grip” on the shaft may be compromised. Check the shaft diameter and bushing bore and make corrections as appropriate.


3/4 tape per footon diameter

L

(F)G

A

BD ød

P & W BushingM & N Bushing

JA to J BushingH Bushing

QD bUsHinG DiMensionsbUsHinG siZe

DiMensions (inCHes) Ød bolT ReQUiReD

CaP sCReWs ReQUiReD

boRe RanGe WGT# (lbs)a b D f G l inCH MeTRiC

H 0.250 1.625 2.500 0.875 0.125 1.250 2.0000 2~1/4 x 3/4 3/8~1 1/2 10~35 0.70 Ja 0.311 1.375 2.000 0.563 0.125 1.000 1.6563 3~0.190 x 1 1/2~1 1/4 10~28 0.90sH 0.441 1.871 2.688 0.813 0.125 1.311 2.6875 3~1/4 x 1~3/8 1/2~1 11/16 14~38 1.00

sDs 0.441 2.187 3.188 0.750 0.125 1.311 2.6875 3~1/4 x 1~3/8 3/8~2 14~42 1.30sD 0.441 2.187 3.188 1.250 0.125 1.811 2.6875 3~1/4x 1-7/8 3/8~2 14~42 1.60sK 0.563 2.812 3.875 1.250 0.125 1.938 3.3125 3~5/16 x 2 1/2~2 5/8 14~60 2.50sf 0.618 3.125 4.625 1.250 0.250 2.059 3.8750 3~3/8 x 2 1/2~2 15/16 24~65 3.25e 0.882 3.834 6.000 1.625 0.250 2.752 5.0000 3~1/2 x 2 3/4 7/8~3 1/2 32~75 10.00f 1.000 4.437 6.625 2.500 0.313 3.748 5.6250 3~9/16 x 3 5/8 1~4 25~90 12.00J 1.126 5.148 7.250 3.188 0.313 4.626 6.2500 3~5/8 x 4 1/2 1 7/16~4 1/2 50~100 18.00M 1.250 6.500 9.000 5.188 0.313 6.750 7.8750 4~3/4 x 6 3/4 1 15/16~5 1/2 50~130 37.00n 1.500 7.000 10.000 6.250 0.375 8.125 8.5000 4~7/8 x 8 1/2 2 1/2~5 7/8 80~140 57.00P 1.750 8.250 11.750 7.250 0.375 9.375 10.0000 4~1 x 9 1/2 2 15/16~6 1/2 70~150 115.00

W 2.000 10.437 15.000 9.000 0.375 11.375 12.7500 4~1 1/8 x 11 5/8 4~7 100~170 240.00

Qd bushing dimensions

# Weights are approximate and are based on median bore diameter


Qd bushing stAndArd bores & keywAysenGlisH boRe

bUsHinG boRes - inCHes KeYWaYH 3/8, 7/16 no K.s.

1/2, 9/16 1/8 x 1/165/8, 11/16, 3/4, 13/16, 7/8 3/16 x3/3215/16, 1, 1 1/16, 1 1/8 1/4 x 1/81 3/16, 1 1/4 1/4 x 1/81 5/16, 1 3/8 5/16 x 1/16*1 7/16 3/8x 1/16*1 1/2 3/8 x 3/64*

Ja 7/16, 1/2, 9/16 1/8 x 1/165/8, 11/16, 3/4, 13/16, 7/8 3/16 x 3/3215/16, 1 1/4 x 1/81 1/16, 1 1/8, 1 3/16 1/4 x 1/16*1 1/4 no Key

sH 1/2, 9/16 1/8 x 1/165/8, 11/16, 3/4, 13/16, 7/8 3/16 x 3/3215/16, 1, 1 1/16, 1 1/8, 1 3/16, 1 1/4

1/4 x 1/8

1 1/4, 1 5/16, 1 3/8 5/16 x 5/321 7/16, 1 1/2, 1 9/16, 1 5/8 3/8 x 1/16*1 11/16 no Key

sDs 1/2, 9/16 1/8 x 1/165/8, 11/16, 3/4, 13/16, 7/8 3/16 x 3/3215/16, 1, 1 1/16, 1 1/8, 1 3/16, 1 1/4

1/4 x 1/8

1 1/4, 1 5/16, 1 3/8 5/16 x 5/321 3/8, 1 7/16, 1 1/2, 1 9/16, 1 5/8, 1 11/16

3/8 x 3/16

1 3/4 3/8 x 1/8*1 13/16 1/2 x 1/8*1 7/8, 1 15/16 1/2 x 1/16*2 no Key

sD 1/2, 9/16 1/8 x 1/165/8, 11/16, 3/4, 13/16, 7/8 3/16 x 3/3215/16, 1, 1 1/16, 1 1/8, 1 3/16, 1 1/4

1/4 x 1/8

1 1/4, 1 5/16, 1 3/8 5/16 x 5/321 3/8, 1 7/16, 1 1/2, 1 9/16, 1 5/8, 1 11/16

3/8 x 3/16

1 3/4 3/8 x 1/81 13/16 1/2 x 1/81 7/8, 1 15/16 1/2 x 1/162 no Key

enGlisH boRebUsHinG boRes - inCHes KeYWaYsK 1/2, 9/16 1/8 x 1/16

5/8, 11/16, 3/4, 13/16, 7/8 3/16 x 3/321 5/16, 1, 1 1/16, 1 1/8, 1 3/16, 1 1/4

1/4 x 1/8

1 1/4, 1 5/16, 1 3/8 5/16 x 5/321 5/16, 1 3/8, 1 7/16, 1 1/2, 1 9/16, 1 5/8

3/8 x 3/16

1 11/16, 1 3/4 3/8 x 3/161 3/4, 1 13/16, 1 7/8, 1 15/16, 2, 2 1/16, 2 1/8

1/2 x 1/4

2 3/16, 2 1/4 1/2 x 1/8*2 1/4, 2 5/16, 2 3/8, 2 7/16, 2 1/2

5/8 x 1/16*

2 9/16, 2 5/8 no Keysf 1/2, 9/16 1/8 x 1/16

5/8, 3/4, 7/8 3/16 x 3/3215/16, 1, 1 1/16, 1 1/8, 1 3/16, 1 1/4

1/4 x 1/8

1 5/16, 1 3/8 5/16 x 5/321 3/8, 1 7/16, 1 1/2, 1 9/16, 1 5/8

3/8 x 3/16

1 11/16, 1 3/4 3/8 x 3/161 13/16, 1 7/8, 1 15/16, 2, 2 1/16

1/2 x 1/4

2 1/8, 2 3/16, 2 1/4 1/2 x 1/42 1/4 5/8 x 5/162 5/16, 2 3/8, 2 7/16, 2 1/2 5/8 x 3/16*2 9/16, 2 5/8, 2 11/16, 2 3/4 5/8 x 1/16*2 13/16, 2 7/8 3/4 x 1/16*2 15/16 no Key

e 7/8, 15/16 3/16 x 3/321, 1 1/8, 1 3/16, 1 1/4 1/4 x 1/81 5/16, 1 3/8 5/16 x 5/321 3/8, 1 7/16, 1 1/2, 1 9/16, 1 5/8

3/8 x 3/16

1 11/16, 1 3/4 3/8 x 3/161 13/16, 1 7/8, 1 15/16, 2, 2 1/16

1/2 x 1/4

2 1/8, 2 3/16, 2 1/4 1/2 x 1/42 1/4, 2 5/16, 2 3/8, 2 7/16, 2 1/2

5/8 x 5/16

2 9/16, 2 5/8 5/8 x 5/162 11/16, 2 3/4 5/8 x 5/162 13/16, 2 7/8, 2 15/16, 3 3/4 x 1/8*3 1/8, 3 3/16, 3 1/4 3/4 x 1/8*3 5/16, 3 3/8, 3 7/16 7/8 x 1/16*3 1/2 7/8 x 1/16*

QD bushings are ductile iron except for H bushings which are steel.

*shallow keys furnished for bushings with shallow keyway.


Qd bushing stAndArd bores & keywAysenGlisH boRe

bUsHinG boRes - inCHes KeYWaYf 1,1 1/8, 1 3/16, 1 1/4 1/4 x 1/8

1 3/8 5/16 x 5/321 7/16, 1 1/2, 1 9/16, 1 5/8, 1 11/16, 1 3/4

3/8 x 3/16

1 13/16, 1 7/8, 1 15/16, 2, 2 1/16

1/2 x 1/4

2 1/8, 2 3/16, 2 1/4 1/2 x 1/42 1/4, 2 5/16, 2 3/8, 2 7/16, 2 1/2, 2 9/16, 2 5/8

5/8 x 5/16

2 11/16, 2 3/4 5/8 x 5/162 13/16, 2 7/8, 2 15/16, 3 3/4 x 3/83 1/8, 3 3/16, 3 1/4 3/4 x 3/83 5/16, 3 3/8, 3 7/16, 3 1/2 7/8 x 3/16*3 5/8, 3 11/16, 3 3/4 7/8 x 3/16*3 7/8, 3 15/16 1 x 1/8*4 no Key

J 1 7/16, 1 1/2, 1 1/16, 1 3/4 3/8 x 3/161 7/8, 1 15/16, 2, 2 1/16 1/2 x 1/42 1/8, 2 3/16, 2 1/4 1/2 x 1/42 5/16, 2 3/8, 2 7/16, 2 1/2, 2 5/8

5/8 x 5/16

2 11/16, 2 3/4 5/8 x 5/162 7/8, 2 15/16, 3 3/4 x 3/83 1/8, 3 3/16, 3 1/4 3/4 x 3/83 5/16, 3 3/8 ,3 7/16, 3 1/2 7/8 x 7/16*3 5/8, 3 11/16, 3 3/4 7/8 x 7/16*3 13/16, 3 7/8, 3 15/16 1 x 3/8*4, 4 1/8, 4 3/16, 4 1/4 ,4 3/8, 4 7/16, 4 1/2

1 x 1/8*

M 1 15/16, 2 1/2 x 1/42 3/16, 2 1/4 1/2 x 1/42 3/8, 2 7/16, 2 1/2, 2 5/8 5/8 x 5/162 11/16, 2 3/4 5/8 x 5/162 7/8, 2 15/16, 3 3/4 x 3/83 1/8, 3 3/16, 3 1/4 3/4 x 3/83 3/8, 3 7/16, 3 1/2 7/8 x 7/163 5/8, 3 11/16, 3 3/4 7/8 x 7/163 13/16, 3 7/8, 3 15/16 1 x 1/24, 4 1/8, 4 3/16, 4 1/4, 4 3/8, 4 7/16, 4 1/2

1 x 1/2

4 5/8, 4 11/16, 4 3/4 1 1/4 x 5/84 7/8, 4 15/16 1 1/4 x 1/4*5, 5 3/16, 5 1/4, 5 3/8, 5 7/16, 5 1/2

1 1/4 x 1/4*

enGlisH boRebUsHinG boRes - inCHes KeYWaYn 2 15/16, 3 3/4 x 3/8

3 3/8, 3 7/16, 3 1/2 7/8 x 7/163 5/8, 3 3/4 7/8 x 7/163 7/8, 3 15/16 1 x 1/24, 4 3/16, 4 1/4, 4 3/8, 4 7/16, 4 1/2

1 x 1/2

4 3/4 1 1/4 x 5/84 7/8, 4 15/16, 5 1 1/4 x 5/85 3/16, 5 7/16, 5 1/2 1 1/4 x 1/4*

P 2 15/16, 3 1/4 3/4 x 3/83 3/8, 3 7/16, 3 1/2 7/8 x 7/163 5/8, 3 3/4 7/8 x 7/163 7/8, 3 15/16, 4, 4 1/4 1 x 1/24 3/8, 4 7/16, 4 1/2 1 x 1/24 5/8, 4 11/16, 4 3/4 1 1/4 x 5/84 7/8, 4 15/16, 5, 5 1/8 1 1/4 x 5/85 3/16, 5 1/4, 5 5/16 1 1/4 x 5/85 3/8, 5 7/16, 5 1/2, 1 1/4 x 5/85 3/4, 5 7/8, 5 15/16, 6 1 1/2 x 1/4*6 1/16, 6 1/4, 6 7/16 1 1/2 x 1/4*6 1/2 1 1/2 x 1/4*

W 4 1/4,4 7/16, 4 1/2 1 x 1/24 5/8, 4 3/4, 4 7/8, 4 15/16 1 1/4 x 5/85, 5 3/8, 5 7/16, 5 1/2 1 1/4 x 5/85 11/16 1 1/4 x 5/85 3/4, 5 7/8, 5 15/16, 6 1 1/2 x 3/46 1/4, 6 7/16, 6 1/2 1 1/2 x 3/46 3/4, 6 7/8, 6 15/16, 7 1 3/4 x 3/4*


*shallow keys furnished for bushings with shallow keyway.


MeTRiC boResiZe boRe-MM KeY**

H 10,11,12 no K.W.14,15,16,17 5 x 517,18,19,20,22 6 x 624,25,28,29,30 8 x 730,32,35 10 x 8

Ja 10,11,12 no K.W.14,15,16 5 x 518,19,20,22 6 x 624,25,28 8 x 7

sH 14,15 5 x 519,20,22 6 x 624,25,28,30 8 x 732,35,38 10 x 8

sDs 14 5 x 519 6 x 624,25,28,30 8 x 732,35,38 10 x 840,42 12 x 8

sD 14 5 x 519 6 x 624,25,28,30 8 x 732,35,38 10 x 640,42 12 x 8

sK 14 5 x 519 6 x 620,24,25,28,30 8 x 732,35,38 10 x 640,42 12 x 847,48,50 14 x 955 16 x 10

sf 24,28,30 8 x 732,35,38 10 x 640,42 12 x 848,50 14 x 955 16 x 1060,65 18 x 11

MeTRiC boResiZe boRe-MM KeY**

e 32,35,38 10 X 640,42 12 X 845,47,48,50 14 X 955 16 X 1060,65 18 X 1170,75 20 X 12

f 25,30 8 X 732,35,38 10 X 640 12 X 850,55 16 X 1060,65 18 X 1170,72,75 20 X 1280,85 22 X 1490 25 X 14

J 50,55 16 X 1060,65 18 X 1170,75 20 X 1280,85 22 x 1490 25 x 14

M 50,55 16 x 1060,65 18 x 1170,75 20 x 1280,85 22 x 1490 25 x 1495,100,110 28 x 16120,130 32 x 18

n 80 22 x 1490 25 x 14100,110 28 x 16115,125,130 32 x 18140 36 x 20

P 70,75 20 x 1295,110 28 x 16130,150 36 x 20

W 150,170 40 X 22

Qd bushing stAndArd bores & keys


**Metric system identifies the key size, not the keyway.


terms oF sAlepricinglist prices and/or published discounts are subject to change. drive components will make every effort to provide a minimum of 30 days notice of any price adjustment. orders will be invoiced at the price in effect at the time the order was entered, providing the order is released in its entirety. shipments scheduled (by the customer) past the effective date of any price adjust-ment will be invoiced at the price in effect at the time of shipment.

Freightall shipments will be made fob drive components distribution center(s), freight prepaid and allowed on orders with a (net) order value of $1,500.00 Us or more. Minimum (net) order is $50.00 Us.

shippingdrive components reserves the option to select the most expeditious and reliable carrier. Customers requesting a specific carrier and/or shipping method will be responsible for any extra charges associated with their selected routing.

paymentfor customers on open account, payment terms are neT 30 Days.

warrantydrive components warrants product(s) to be free from defects in material or workmanship for a period not to exceed one (1) year from the date of shipment. drive components will replace defective product, at no charge, upon inspection and confirmation of defect. drive components’ obligation is limited to replacement of like product and is not liable for consequential damages or expense incurred in the use of drive components’ products. There is no warranty expressed or implied for contingent liability, merchantability, or fitness of use for any purpose.

returnsstock items of current design and in saleable condition may be accepted for return. a restocking fee will apply. Contact your sales Representative or Drive Components for instructions.

Freight claimsClaims for damages are to be reported to the carrier at the time the shipment is received.

revisionsDrive Components reserves the option to make changes to this product guide and price list without prior notice. However, every effort will be made to advise our customers of any changes well in advance of the effective date.

drive components, llc6519 eastland road #106

brookpark, oh 44142phone: 440.234.6200FAx: 440.234.1200

email: [email protected]

QUALITY SERVICE VALUE

DC-03-11DRIVE COMPONENTS, 6519 EASTLAND ROAD #106, BROOKPARK, OH 44142

Documents

POWER TRANSMISSION PRODUCTS - Drive Components LLC