Upload
documentation5070
View
43
Download
8
Embed Size (px)
Citation preview
Meeting OMV- PETROM / 06-24-2011
JC VALVULAS / Spain
(Western Europe)
Since 1968
TRUELINE Canada (North & South America)
TRUELINE VOSTOK Eastern Europe & C.I.S.
Oil & Gas, Power, Chemical, Petrochemical, Pulp & Paper , Mine extraction…
Wide range of superior quality products
High level of expertise High performance goals such as the guarantee
of long life products for severe applications
Customer technical support with our research & development department
Technical description:
Full and Reduced bore
Floating and Trunnion mounted ball valves
From ½” up to 36” #2500.
Floating BV up to 8” #300.
Soft and Metal seats
ANSI & DIN designs
Motorized ball valves
Special applications:
High temperature
3 ways ball valves
By-pass ball valves
Cryogenic ball valves
Floating BV ASME
3-ways BV
Forged Trunnion mounted BV / Cut drawing
Castings Quality as per ASME B16.34 Mandatory
Appendix I to IV in ASME valves and Severity Levels
S3-V3 to DIN 1690 and EN 10203 in EN-DIN valves
Polished ball Ra 1 in soft seated valves (in metal seated valves ball is lapped); grinded stem Ra 1.6
Full traceability of shell components, ball and stem as per EN 10204 3.1
Antistatic device integral with the stem
Viton A, Aflas or Kalrez primary stem seal and
secondary graphite packing
NACE MR.01.75 wetted parts and bolting as Standard
Fire safe as standard construction ISO 10947 : 2004 and API607 : 3rd, 4th, 5th edition
Fugitive emissions EN-ISO 15848-1
SIL 3 (Safety Integrity level 3)
Trunnion mounted BV
GATE VALVES BOLTED BONNET
from Class 150 up to Class 2500
from 2’’ up to 36’’
PRESSURE SEAL
from Class 900 up to Class 2500
from 2’’ up to 20’’
GLOBE VALVES
BOLTED BONNET
from Class 150 up to Class 2500
from 2’’ up 12’’
PRESSURE SEAL
from Class 900 up to Class 2500
from 2’’ up to 16’’
CHECK VALVES
BOLTED COVER
from Class 150 up to Class 2500
from 2’’ up to 36’’
PRESSURE SEAL
from Class 900 up to Class 2500
from 2’’ up to 20’’
Globe valves
Gate valves
Check valves
Technical description :
From 2 in. up to 48 inches. Motorized knife gate valves
Design upon customer requests
A unique design and technology
A unique design and highest performance technology
Example of special design KGV: russian project (2011).
Thermal-chemical diffusion a unique technology to provide the highest level of performance.
Applications: ball valves, knife gate valves, sleeve bearings, all metal parts.
HT-65 : - Hardener treatment of austenic steels - Highly resistant to wear, seizure & corrosion - Thermally stable up to 550°C / 1060°F - Thermal-chemical diffusion protects material from expansion
Hardness comparison chart
HT-2200
PROPERTIES & APPLICATIONS Extremely hard surfaces. Gives longer service life to valve parts. High abrasive wear and oxidation resistant properties. Thermally stable up to 870 °C/1600 °F.
Applications: ball valves, knife gate valves, sleeve bearings, all metal parts.
OTHER TECHNOLOGIES PROPOSED Non metallic seats as an alternative of metal seated valves: Our seats are non-porous as are Teflon based seats. True-Hard 66 : up to 425°F/ +218°C True-Therm 99: up to 625°F /+343°C
G.E. CASE STUDY Needs: safety automatic BV (trunnion mounted) with pneumatic control / failed close. Environment: High temperature & G.E. Gas turbins Results: we designed special actuated valves and made specific tests to assure long life guarantee
and no leakage; 15.000 cycles at high temperature (810°F/432°C). Leakage tests were even better then ANSI Class VI requirements.
We have been qualified by G.E. and specifications for all Gas Turbins are based on our approved high technology.
PALL FILTRATION Gas filtration specialist.
Needs: an automatic BV- fast opening less than 500ms (Blow back system) Environment: gas treatment plants Solutions found by TRUELINE: Opposed piston type but with 4 pistons types construction
+external tubings + special solenoid mounting Results: we reached an opening time of less than 300ms with 3.5bar air supply.
We can know also propose metal/metal design for high temperature and TH-66 seats.
Test results: 15.000 cycles @810°F.
Main agreements & Oil and Gas customers: SHELL Tests & MESC qualified .R.G.B. (Belgium Gas) /nD.G. (Danish Gas) /nD.V.G.W. (German Gas) ARAMCO Vendor Listed ENAGAS, S.A. (Spain) nGas Natural SDG, S.A. (Spain) Chevron Philipps Dragon Oil (Turkmenistan) DetNorskeVeritasAS (Norway) EXXON (+ Kvaerner) ( North Sea) General Electric Czech Republic (Brno Institute) Abu Dhabi Gas Liquefaction Company Ltd. (ADGAS) Abu Dhabi National Oil Company (ADNOC) TAKREER Kuwait National Petroleum Company (KNPC) Kuwait Oil Company (KOC) PetróleoBrasileiro, S.A. (Petrobras) Petróleosde Venezuela, S.A. (PDVSA) Petroleum Development Oman (PDO) Qatar General Petroleum Corporation (QGPC) Repsol-YPF Group Texaco Gaz de France (North sea)…
JC Quality Assurance System ISO 9001 : 2000 certified by BVQI API Q1 certified by the AMERICAN - PETROLEUM INSTITUTE PED 97 / 23 / EC certified by BVQI Products Approvals API 6D certified by the AMERICAN - PETROLEUM INSTITUTE CE Marking (Module H, Category III) in accordance with PED 97 / 23 / EC certified by BVQI Fire Safe ISO 10947 : 2004 certified by SGS API 607 3rd., 4th. and 5th. Edition certified by SGS BS 6755 Part 2 certified by Lloyd’s Register and SGS RUSSIAN CERTIFICATES: GOST R & Rostekhnadzor SIL 3 (Safety integrity level) Atex EN 13774 Environmental Certifications ISO 14001 : 2004 certified by BVQI ISO-EN 15848-1 certified by SGS
TRUELINE VOSTOK 54, Bis boulevard Jean-Baptiste LEBAS 59000 LILLE / France http://www.truelinevostok.com Sales director : Arianne Asselineau Mobile: +336 62904308 Sales area manager Africa : Vick Mackenzie Mobile: +33642285606 Chief Engineer: Vincent Dalmagne Office: +336 09 77 25 46