Position Paper # 13 PP13 Rev: B Date: 13 May 2002 Declaration of Conformity, Rotor Ground Fault Receiver Assembly Generators are typically fitted with a main rotor RGF (field ground fault) detection monitoring system. This monitoring system is fitted on the generator rotor shaft, which interfaces digital or analog signals to the OEM control panel where the RGF detector receiver is located. GE PPLP fits the RGF detector receiver assembly in the Generator / Turbine Control Panel, which provides a digital input to the system sequencer for alarm annunciation when a ground fault in the rotor is detected. Product Name: Rotor Ground Fault Detector Assembly Part Number: 9630910/01 Manufacture: GE PPLP / Brush Electrical Machines Year of Manufacture: 2000 Conformance to Directives: The product hereby complies with the EC directive for EMC 89/336/EEC and the directive for Safety 73/23/EEC (Low Voltage Directive) Applicable Standards: EMC: EN 50081-1 1994 Generic emission standard. Part 2: Industrial environment. EN 61000-6-2 1999 Generic immunity standard. Part 2: Industrial environment. Safety: EN 61010-1 1993 Safety requirements for electrical equipment for measurement and control and laboratory use. A Technical Construction File containing product documentation is maintained by: GE Aero Energy Products, PP LP 16415 Jacintoport Blvd. Houston, TX 77015 We the undersigned declare that the equipment specified above conforms to the above Directive(s): Robert Baten Randy Kleen Manager of Engineering Chief Engineer - Electrical Mark Jaynes Vincent Page Chief Engineer – Controls Chief Engineer - Mechanical g GE Aero Ene GE Aero Ene GE Aero Ene GE Aero Energy Products rgy Products rgy Products rgy Products A GE Power Systems Business A GE Power Systems Business A GE Power Systems Business A GE Power Systems Business 16415 Jacintoport Blvd. Houston, TX 77015 Tel: 281-864-2803 Fax: 281-864-2459
Declaration of Conformity, Rotor Ground Fault Receiver
Assembly
Generators are typically fitted with a main rotor RGF (field
ground fault) detection monitoring system. This monitoring system
is fitted on the generator rotor shaft, which interfaces digital or
analog signals to the OEM control panel where the RGF detector
receiver is located. GE PPLP fits the RGF detector receiver
assembly in the Generator / Turbine Control Panel, which provides a
digital input to the system sequencer for alarm annunciation when a
ground fault in the rotor is detected. Product Name: Rotor Ground
Fault Detector Assembly Part Number: 9630910/01 Manufacture: GE
PPLP / Brush Electrical Machines Year of Manufacture: 2000
Conformance to Directives: The product hereby complies with the EC
directive for EMC 89/336/EEC and the directive for Safety 73/23/EEC
(Low Voltage Directive) Applicable Standards: EMC: EN 50081-1 1994
Generic emission standard. Part 2: Industrial environment. EN
61000-6-2 1999 Generic immunity standard. Part 2: Industrial
environment. Safety: EN 61010-1 1993 Safety requirements for
electrical equipment for measurement and control and laboratory
use. A Technical Construction File containing product documentation
is maintained by: GE Aero Energy Products, PP LP 16415 Jacintoport
Blvd. Houston, TX 77015
We the undersigned declare that the equipment specified above
conforms to the above Directive(s): Robert Baten Randy Kleen
Manager of Engineering Chief Engineer - Electrical Mark Jaynes
Vincent Page Chief Engineer Controls Chief Engineer -
Mechanical
g GE Aero EneGE Aero EneGE Aero EneGE Aero Energy Productsrgy
Productsrgy Productsrgy Products A GE Power Systems BusinessA GE
Power Systems BusinessA GE Power Systems BusinessA GE Power Systems
Business 16415 Jacintoport Blvd.
