Upload
cosmicbunny
View
155
Download
16
Embed Size (px)
DESCRIPTION
Tesy Parameter Worksheet
Citation preview
Page# ____ of ____
file:///tt/file_convert/557213cf497959fc0b9312a2/document.xls
Company Logo here
PQR / WPQ actual testing parameter values
Candidate Name Date:
Welding Process(es)
WPS
Type
Backing
Plate or Pipe
Position
observed values 1st Pass 2nd Pass 3rd Pass 4th Pass 5th Pass 6th Pass 7th Pass 8th Pass 9th Pass 10th Pass 11th Pass
Volts (V)
Amps (A)
Wire Feed Rate
Filler Metal Diameter
Weld Progression
interpass cleaning?
Filler Metal
Current / Polarity
Base Metal(s)
Coupon DIA / THK
Visual Inspection Results
Travel Speed (est)IPM
Shielding Gastype, flow rate, composition
Backing Gastype, flow rate, composition
Trailing Gastype, flow rate, composition
Page# ____ of ____
file:///tt/file_convert/557213cf497959fc0b9312a2/document.xls
Candidate Name Date:
Welding Process(es)
WPS
Type
Backing
Plate or Pipe
Position
Additional notes
Date:Welding witnessed by: (Signature)
SPX Flow Technology - APV Heat Transfer
PQR / WPQ actual testing parameter values
Candidate Name Welder Name here Date: date of weld testWelding Process(es) Welding process(es) is/are listed on the aplicable WPS; i.e. GTAW, GMAW, FCAW, GMAW-CRO, RSW, LBW, etc.
WPS WPS number being used for the weldingType GTAW = manual; GMAW = semi-automatic; GMAW-CRO = automatic, RSW and LBW = machine
Backing
Plate or Pipe What is being weldedPosition What position is being welded in? See figures at bottom of this worksheet
observed values 1st Pass 2nd Pass 3rd Pass 4th Pass 5th Pass 6th Pass 7th Pass 8th Pass 9th Pass 10th Pass 11th Pass
Volts (V)
Amps (A)
Wire Feed Rate
Travel Speed (est)
Weld Progression
interpass cleaning?
Filler Metal
Current / Polarity
Shielding Gas
Backing Gas
Trailing Gas
Base Metal(s)
Coupon DIA / THK
Visual Inspection Results
Additional notes
Welding witnessed by: Date:
Welder Initials here
if backing is used, list whether it is base metal, left-in-lplace backing strip, removable backing strip, etc. If no backing is used, indicate "None".
These readings come directly from the welding machine and are entered for each weld pass.
These readings come directly from the welding machine and are entered for each weld pass.
Currrently GMAW and GMAW-CRO only! These readings come directly from the welding machine wire feeder.
Time welding operation for one minute and measure inches per minute for the Travel Speed.
Either uphill or downhill; each weld pass may be different if WPS states.
Did the welder clean, grind, or wire brush between passes?
List the Manufacturer, Alloy, Diameter, amnd SFA No. of the filler metal being used.
AC or DC; Electrode Negative or Positive.
Record the Shielding gas number, the mixture, and the flow rate in CFH when used.
Record the Backing gas number, the mixture, and the flow rate in CFH when used.
Record the Trailinggas number, the mixture, and the flow rate in CFH when used.
Record the Material Specification of the base Metal(s).
If Plate, list the thickness; if Pipe, list the Diameter and wall thickness.
Craig Wesson will perform visual inspection of completed coupon until a weld quality training class is given.
Any additional notes go here.
Sign here Date that form is signed goes here
Groove Welds in Plate -- Test Positions
1G 2G 3G 4G
Groove Welds in Pipe -- Test Positions
1G Rotated 2G 5G 6G
Fillet Welds in Plate -- Test Positions
1F 2F 3F 4F
Date that form is signed goes here