Embed Size (px)
Citation preview
PRAIRIE REGION
2015 Catalogue
2 TAIGA PREMIUM PRIME MOULDINGS • 2015 CATALOGUE – PRAIRIE REGION
TAIGA PREMIUM PRIME MOULDINGS • 2015 CATALOGUE – PRAIRIE REGION 3
Taiga mouldings are manufactured from the finest, medium-density fibreboard (MDF) available and treated with a unique coating that accepts any type of high-quality trim paint. The process employed in the actual moulding and priming is state-of-the-art, when compared to existing industry standards. Many hours of research, development and laboratory tests for uniformity, strength and other structural qualities have produced a product that is virtually unsurpassed.
For more information visitTAIGABUILDING.COM
Let your home inspire your creativity. Add style and beauty with Taiga Premium Prime Mouldings.
PREMIUM PRIME MOULDINGS DISTRIBUTED BY TAIGA BUILDING PRODUCTS
4 TAIGA PREMIUM PRIME MOULDINGS • 2015 CATALOGUE – PRAIRIE REGION
Medium Density Fibreboard (MDF) is part of a family of environmentally friendly products known as Engineered Wood.
Typically, wood shavings, chips and sawdust that remain after a tree is milled into lumber are collected, cleaned and refined to create uniform particles or fibres. Excess moisture is removed and an adhesive resin is added. The combination of 92% wood and 8% resin, on average, is formed into long thick mats, which are then compressed under intense heat and pressure. Progress at each stage is closely monitored by computers, which can measure slight variations that even the human eye cannot detect.
The resulting wood panels are laboratory-tested for uniformity, strength, screw-retention and other structural qualities, as required to meet the stringent industry standards for furniture and cabinet-grade wood panel products.
PREMIUM PRIME MDFSPECIES PROFILE
TAIGA PREMIUM PRIME MOULDINGS • 2015 CATALOGUE – PRAIRIE REGION 5
6 TAIGA PREMIUM PRIME MOULDINGS • 2015 CATALOGUE – PRAIRIE REGION
3
4
1
2
TAIGA PREMIUM PRIME MOULDINGS • 2015 CATALOGUE – PRAIRIE REGION 7
CASINGS are moulded or surfaced on all four sides in a variety of widths and thicknesses for trimming door and window openings. SEE PAGE 8.
1
CROWNS are used as a decorative element to connect surfaces which meet at an angle. Installing crown mouldings is an effective way to apply elegance and character to a traditional looking room. SEE PAGE 15.
3
ARCHITRAVES are classic, Greek-style architectural elements that are used to accent the top of a door, window or other openings. SEE PAGE 16.
4
BASEBOARDS are base mouldings around the perimeter of a r oom at the point of intersection of the walls and finished floor. SEE PAGE 12.
2
MOULDINGS GALLERYREFERENCE GUIDE
Choose from a variety of attractive mouldings to showcase your unique sense of style in your home.
8 TAIGA PREMIUM PRIME MOULDINGS • 2015 CATALOGUE – PRAIRIE REGION
* ALL SIZES ARE NOMINAL
PREMIUM PRIME MDFCASINGS
A
E F G H
B C D
REF ITEM SIZE
A T-105 (305) 1/2” x 2-3/4”
T-105A (305A) 1/2” x 2-1/2”
B T-106 (306) 5/8” x 2-3/4”
C T-111A (311A) 5/8” x 3-1/4”
T-111B (311) 3/4” x 3”
REF ITEM SIZE
D T-138 (338) 5/8” x 3”
E T-145 (345) 3/4” x 3-1/2”
F T-160 (360) 3/4” x 3-1/2”
G T-165A (365) 3/4” x 3-1/2”
H T-173 (373) 5/8” x 2-1/2”
TAIGA PREMIUM PRIME MOULDINGS • 2015 CATALOGUE – PRAIRIE REGION 9
Please note that not all products may be available in your region, contact your local Taiga representative for more information.
Taiga is a wholesale distribution company, we do not sell directly to the general public. Please contact the nearest retailer for product and pricing information.
PREMIUM PRIME MDFCASINGS
I
M N O
J K L
REF ITEM SIZE
M T-356 1/2” x 2-1/4”
T-356A 3/8” x 2-1/4”
N T-132 (328) STEP 5/8” x 2-1/4”
O T-8081 5/8” x 3-1/4”
REF ITEM SIZE
I T-175 (375) 5/8” x 2-1/2”
J T-175A (375A) 5/8” x 3-1/4”
K T-177 (357) 1/2” x 2-1/4”
L T-179A 5/8” x 3-1/4”
10 TAIGA PREMIUM PRIME MOULDINGS • 2015 CATALOGUE – PRAIRIE REGION
* ALL SIZES ARE NOMINAL
PREMIUM PRIME MDFCASINGS
REF ITEM SIZE
P T-100 (325A) 1/2” x 2-1/2”
Q T-125 (325) 5/8” x 3”
R T-125G (325G) 3/4” x 3”
S T-126 (324) 5/8” x 3”
REF ITEM SIZE
T T-126A (326) 5/8” x 3”
U T-136A (3333A) 1/2” x 3-1/2”
VT-136B (3333B) 5/8” x 3-1/2”
T-125R 5/8” x 3”
W T-136M (3333M) 3/8” x 2-1/4”
P Q R S
T U V W
TAIGA PREMIUM PRIME MOULDINGS • 2015 CATALOGUE – PRAIRIE REGION 11
Please note that not all products may be available in your region, contact your local Taiga representative for more information.
Taiga is a wholesale distribution company, we do not sell directly to the general public. Please contact the nearest retailer for product and pricing information.
PREMIUM PRIME MDFCASINGS
REF ITEM SIZE
X T-128T (316) 3/4” x 3-1/4”
Y T-141A (380) FLUTED 5/8” x 3-1/4”
Z T-144 (341) REVERSIBLE 5/8” x 3-3/8”
REF ITEM SIZE
AA T-142T (317) BEADED 3/4” x 3-1/4”
BB T-191A 5/8” x 3”
T-191 5/8” x 3-1/2”
X Y
BB
Z
AA
12 TAIGA PREMIUM PRIME MOULDINGS • 2015 CATALOGUE – PRAIRIE REGION
PREMIUM PRIME MDFBASEBOARDS
REF ITEM SIZE
A T-305 (205) 1/2” x 3-1/2”
T-305A (205A) 1/2” x 3-1/4”
B T-308 (206) 1/2” x 4”
T-308A (206A) 5/8” x 5”
C T-312 (211) 5/8” x 4-1/4”
T-314 (211A) 5/8” x 5-1/4”
REF ITEM SIZE
D T-391A 1/2” x 5”
T-391 1/2” x 6-1/2”
E T-332 (228) STEP 1/2” x 3-1/4”
F T-338 (238) 1/2” x 5”
G T-343A (256) 3/8” x 3-1/4”
H T-345 (245B) 5/8” x 5”
T-345A (245) 5/8” x 5-1/2”
A B C D
E F G H
Please note that not all products may be available in your region, contact your local Taiga representative for more information.
Taiga is a wholesale distribution company, we do not sell directly to the general public. Please contact the nearest retailer for product and pricing information.
TAIGA PREMIUM PRIME MOULDINGS • 2015 CATALOGUE – PRAIRIE REGION 13
PREMIUM PRIME MDFBASEBOARDS
REF ITEM SIZE
I T-353A (653) 7/16” x 3-1/4”
T-355 (663) 9/16” x 4-1/4”
J T-360 (260) 5/8” x 5-1/2”
K T-365 (265) 5/8” x 6-1/2”
L T-365B (265A) 5/8” x 6-1/2”
M T-372 (272) 5/8” x 4-1/8”
REF ITEM SIZE
N T-373 (379) 5/8” x 3-7/8”
O T-375 (275) 5/8” x 5”
T-375A (275A) 5/8” x 4”
P T-377 (257) 3/8” x 3-1/4”
Q T-8281 1/2” x 5”
R T-8283 1/2” x 6”
I
N
J
O
K L
P
M
Q R
* ALL SIZES ARE NOMINAL
14 TAIGA PREMIUM PRIME MOULDINGS • 2015 CATALOGUE – PRAIRIE REGION
* ALL SIZES ARE NOMINAL
PREMIUM PRIME MDFBASEBOARDS, FLAT STOCKS AND JAMBS
A B C
E
D
F
G H
REF ITEM SIZE
A T-324 (224) 1/2” x 4”
T-324A (224B) 1/2” x 5”
B T-325 (225) 1/2” x 4”
T-325B (2333Z) 5/8” x 3-1/2”
T-325G (225Y) 5/8” x 5”
C T-336A (2333A) 1/2” x 5”
T-336B (2333B) 5/8” x 5”
T-336C (2333C) 1/2” x 6”
T-325R 1/2” x 4”
D T-336M (2333M) 3/8” X 3”
E E2E FLAT STOCK1 x 2 11/16” x 1-1/2”
1 x 3 11/16” x 2-1/2”
1 x 4 11/16” x 3-1/2”
1 x 5 11/16” x 4-9/16”
1 x 6 11/16” x 5-1/2”
1 x 7 11/16” x 6-9/16”
1 x 8 11/16” x 7-1/4”
F T-922 (422) STOP 3/8” x 1-1/4”
G T-936 (436) STOP 3/8” x 1-1/4”
H Interior Jamb 11/16” x 4-9/16”
11/16” x 6-9/16”
Interior Jamb C&D 11/16” x 4-9/16”
11/16” x 6-9/16”
TAIGA PREMIUM PRIME MOULDINGS • 2015 CATALOGUE – PRAIRIE REGION 15
Please note that not all products may be available in your region, contact your local Taiga representative for more information.
Taiga is a wholesale distribution company, we do not sell directly to the general public. Please contact the nearest retailer for product and pricing information.
PREMIUM PRIME MDFCROWNS
A
F HG
REF ITEM SIZE
A T-448A (648) 1-1/4” x 2-1/2”
B T-413 (41) 1-1/4” x 6-5/16”
C T-499 (99) 7/8” x 6-5/16”
D T-451 (573) 1/2” x 3-1/4”
T-454 (54) 1/2” x 2-1/4”
T-470A (574A) 1/2” x 4-1/4”
T-475 (575) 3/4” x 5”
REF ITEM SIZE
E T-476 (576) 3/4” x 6-1/8”
F T-488 (588) 5/8” x 3-1/4”
G T-451 (573) 1/2” x 3-1/4”
H T-412 (586) 3/4” x 4-1/2”
I T-441 1-1/4” x 5-3/4”
E
B C D
I
16 TAIGA PREMIUM PRIME MOULDINGS • 2015 CATALOGUE – PRAIRIE REGION
* ALL SIZES ARE NOMINAL
PREMIUM PRIME MDFARCHITRAVES
A B
C
E F
D
G H
SPECIAL PROFILES
REF ITEM SIZE
A T-500 (392) 1-1/4” x 3-3/4”
B T-501 (390) 1-1/4” x 4-1/4”
C T-540 (1004) 1” x 4”
D T-550 (450) 1-1/2” x 4-1/2”
E T-5015 1-1/2” x 5-1/2”
F T-5202 1-1/4” x 4-1/4”
G T-3216HALF ROUND
3/4” x 1-1/2”
H T-822 (222)WAINSCOT
3/8” x 5-3/4”
TAIGA PREMIUM PRIME MOULDINGS • 2015 CATALOGUE – PRAIRIE REGION 17
Please note that not all products may be available in your region, contact your local Taiga representative for more information.
Taiga is a wholesale distribution company, we do not sell directly to the general public. Please contact the nearest retailer for product and pricing information.
FINGER JOINT PINECASINGS
BASEBOARDS
K
P
S
L
Q
T
R
U
M N O
REF ITEM SIZE
K T-111B (311) 11/16” x 3”
L T-140 (3130)FLUTED
9/16” x 2-1/4”
M T-1208 11/16” x 2-1/2”
N T-3002 3/8” x 2-1/4”
T-3000 7/16” x 1-7/16”
O T-356 COLONIAL 7/16” x 2-1/4”
T-356A 3/8” x 2-1/4”
T-356B 3/8” x 2”
P T-312 (211) 5/8” x 4-1/4”
Q T-355 (663) 9/16” x 4-1/4”
R T-625 (333) 3/8” x 2-1/4”
T-623 (323) 3/8” x 3-1/4”
S T-343 (3140) 3/8” x 3-1/4”
T T-344 (444) 7/16” x 3-1/4”
U T-353 (653) 7/16” x 3-1/4”
18 TAIGA PREMIUM PRIME MOULDINGS • 2015 CATALOGUE – PRAIRIE REGION
FINGER JOINT PINESPECIAL PROFILES
REF ITEM SIZE
A T-444 (3244) CROWN 5/8” x 1-1/4”
B T-3212 HALF ROUND 3/8” x 3/4”
C T-3202 QUARTER ROUND 1/2” x 1/2”
T-3206 11/16” x 11/16”
D T-392 (3288) BASE SHOE 1/2” x 3/4”
E T-3260 COVE 1/2” x 1/2”
T-3264 11/16” x 11/16”
F T-3281 (202) COL. O.S.C. 1-1/16” x 1-1/16”
T-3283 11/16” x 11/16”
G T-3280 O.S.C. 1-1/16” x 1-1/16”
T-3282 11/16” x 11/16”
H T-3294 BURLAP 3/8” x 1-5/8”
T-3296 7/16” x 2-1/4”
I T-297 CHAIR RAIL 11/16” x 3”
J T-217 (3277)PANEL MOULD 3/8” x 3/4”
K T-292 WAINSCOT 9/16” x 1-1/8”
L T-3516 PARTING STRIP 3/4” x 3/4”
T-3428 1/2” x 3/4”
M T-207 11/16” x 1-1/4”
N T-3508 WALL RAIL 1-1/4” x 2-1/4”
O T-3510 WALL RAIL 1-1/2” x 1-1/2”
P T-936 STOP 3/8” x 1-1/4”
Q T-922 (3422) STOP 3/8” x 1-1/4”
T-3274 1/4” x 3/4”
R T-3322 BRICK MOULD 1-1/4” x 2-1/4”
T-3322A 1-1/4” x 2”
SINTERIOR RAB. JAMB 1-1/4” x 4-9/16”
1-1/4” X 6-9/16”
T FLAT JAMB 11/16” x 4-9/16”
11/16” x 6-9/16”
U EXTERIOR KERF JAMB 1-1/4” x 4-9/16”
1-1/4” x 6-9/16”
V E4E FLATSTOCK1 x 2 11/16” x 1-3/8”
1 x 3 11/16” x 2-1/2”
1 x 4 11/16” x 3-1/2”
1 x 5 11/16” x 4-9/16”
1 x 6A 11/16” x 5-1/4”
1 x 6 11/16” x 5-1/2”
1 x 7 11/16” x 6-9/16”
1 x 8 11/16” x 7-1/4”
A
D
G
J
NM
B
E
H
K
O
C
F
I
L
P Q
T
R
US V
TAIGA PREMIUM PRIME MOULDINGS • 2015 CATALOGUE – PRAIRIE REGION 19
OAK AND MAPLE
REF ITEM SIZE
A INTERIOR JAMB 11/16” x 4-9/16”
11/16” x 6-9/16”
BT-356 CASING 7/16” x 2-1/8”
T-356V CASING 1/2” x 2-3/16”
C T-936 STOP 3/8” x 1-1/4”
D T-3422 STOP 3/8” x 1-1/4”
E SQUARE EDGE FLAT STOCK1 x 2 3/4” x 1-1/2”
1 x 3 3/4” x 2-1/2”
1 x 4 3/4” x 3-1/2”
1 x 5 3/4” x 4-5/8”
1 x 6 3/4” x 5-1/2”
1 x 8 3/4” x 7-1/4”
1 x 10 3/4” x 9-1/4”
F T-47 CROWN 3/4” x 4-9/16”
T-51 CROWN 11/16” x 3-1/4”
G T-1208 CASING 3/4” x 2-5/8”
H T-3140 BASE 3/8” x 3-1/4”
I T-3206 QRT. RND. 11/16” x 11/16”
J T-3216 HALF RND. 3/4” x 1-1/2”
K T-3244 CROWN 3/4” x 1-1/4”
L T-3264 COVE 11/16” x 11/16”
M T-3294 BURLAP 5/16” x 1-5/8”
T-3296 BURLAP 5/16” x 2-1/4”
N T-411 CASING 5/8” x 3”
O T-412 BASE 9/16” x 4-1/4”
P T-5000 ARCHITRAVE 1-1/8” x 3-3/4”
Q T-3721 PANEL MLD. 1-3/16” x 1”
A
D
G
J
M
B
E
H
K
N
F
I
L
O
P Q
Please note that not all products may be available in your region, contact your local Taiga representative for more information.
Taiga is a wholesale distribution company, we do not sell directly to the general public. Please contact the nearest retailer for product and pricing information.
C
TAIGABUILDING.COM
CALGARY, AB • EDMONTON, AB • REGINA, SK • SASKATOON, SK • WINNIPEG, MB
