Upload
presspoint-media-ltd
View
463
Download
11
Tags:
Embed Size (px)
DESCRIPTION
KMS Adhesives Precision Catalogue
Citation preview
Hotmelt Systems & Parts
Why We Beat The Competition
l Large stocksl 30+ years of specialist knowledge in the adhesive industryl Scheduled call off orders ensuring total peace of mind l Longer order cut-off time, and guaranteed same day despatch on stock itemsl We only stock the best qualityl Friendly honest staff who will go the extra milel Dedicated account managerl No irritating automated telephone system
Net 30 days. Prices exclude VAT. Standard restocking charge of 15% on all returned goods in original packaging and condition. All parts are fully guaranteed. Hoses are guaranteed against defects in materials and workmanship for 6 months from date of invoice. Hoses must be returned for warranty evaluation to determine cause of failure. We will repair or replace, at our discretion. KMS® Terms and Conditions apply, copy available upon request. Melting and pump rates etc. depend upon viscosity of hotmelt.
KMS® Precision™ parts are manufactured as direct replacement parts for Nordson® and other makes of hotmelt system and are neither endorsed by, nor authorised by Nordson®. Nordson® is a registered trademark of Nordson® Corporation. Problue™ is a trade mark of Nordson®.
FreeNext DayDeliveryOn Orders Over
£250Ex. VAT
SameDay
DespatchOn All Stock Items If
Ordered By 2pm
VeryCompetitive
Prices
ProlongThe LifeOf Your
Equipment
& ReduceCosts
FreeOn-Site
AdhesiveAudits
FreeTroubleShooting
NoMinimum
OrderUnique Cleaning
Service
E [email protected] W www.kmsadhesives.co.uk
FreeNext DayDelivery
On Orders Over
£250Ex. VAT
Contents
B4™ Piston and Gear PumpHotmelt Tanks
Micron™ Piston Pump Hotmelt Tanks
Micron™ Gear Pump Hotmelt Tanks
Micron™ PUR LC ReactiveHotmelt (PUR) Tanks
Macro™ Gear Pump Hotmelt Tanks
PS200™ 200 Litre Drum Melter
PS20 Non-Stop 20 LitreDrum Unloader
PC Star Glue Pattern Controller
Hand Guns
Automatic Guns
04
05
06
07
08
08
09
10
10
11
11
11
12
13
13
14
16
26
27
Microprecision Gun
Sift-Proof Gun
Wrap-Around Labelling System
Edgebanding Slot Gun
Melter Feeder
Optimise® Self Cleaning Hotmelts
Price Guide – Replacement Parts
Cleaning Service
Changing AdhesivesThe only adhesive company in the world to offer lineside assistance to keep your production going.
2kg Blocks of PUR HotmeltOptimise® Hotmelts & Intact®
Hotmelt Drum
T 0845 381 1100 F 0845 381 3300
B4™Piston Pump Hotmelt Tank
The best alternative for manual and low cost automatic applications
l 6kg per hour melt ratel Maximum pump rate of 29.3kg per hourl Very simple and reliable operation. No confusing set-up codesl Cost effective upgrade for old existing equipmentl Large lid for easy re-loading of hotmelt adhesivel 2 hose / gun connections
B4™Gear Pump Hotmelt Tank
The best alternative for manual and low cost automatic applications where a smooth delivery of hotmelt adhesive is required
l 6kg per hour melt ratel Fixed speed AC motorl Maximum pump rate of 6kg per hourl Very simple and reliable operation. No confusing set-up codesl Recommended for where higher viscosity hotmelts are usedl Cost effective upgrade for old existing equipmentl Large lid for easy re-loading of hotmelt adhesivel 2 hose / gun connections
04
Price From:
£2678.00
Price From:
£3660.00Optimise® Hotmelts
& Intact®
E [email protected] W www.kmsadhesives.co.uk
4 Ltr Tank
£3438.00
8 Ltr Tank
£3890.00
16 Ltr Tank
£5469.00
32 Ltr Tank
£7797.00
AccessibilityThe Micron™ series machine’s accessibility is a big advantage compared to other models. It provides quick access to the internal machine equipment (electronic and pneumatic parts). For this reason, all the Micron™ machines are equipped with a double side-opening door, which provides total accessibility.
TankLarge tank loading zone, as well as tank drain valve, making its filling and emptying easier. In addition, it includes large contact zones, providing an optimal melting ratio and optionally a low level detector.
SafetyThe depressurisation valve on the Micron™ series equipment is included as standard and releases any residual pump pressure when its electropneumatic power is lost or switched off.
Micron™Piston Pump Hotmelt Tank
The best multiple hose / gun system for automatic applications
l Simple to operate. No confusing set-up codesl 6-30kg per hour melt ratel Pump rate of 29.3kg or 66kg per hourl 2, 4 and 6 hose / gun connectionsl Double-sided access doors for easy maintenancel Large contact zones provides optimum meltingl Tank capacity 4, 8, 16 or 32ltrsl Compatible with existing OEM equipment on most packaging lines – perfect for upgrading old / inefficient systems
05
Prices From:
Optimise® Hotmelts& Intact®
T 0845 381 1100 F 0845 381 3300
Easy Access Motor Control06
Micron™Gear Pump Hotmelt Tanks
Micron™ Gear Pump offers a continuous pulse free output of molten adhesive. Micron™ Gear Pump is recommended for applications where high viscosity hotmelts are used and precise glue application is essential
l 4, 8, 16 and 32ltr tank capacityl Variable speed AC motorl 6-16kg per hour melt ratel 2, 4 hose / gun connectionsl Control glue quantity through the gear speedl Double-sided access doors for easy maintenancel Large number of pump sizes available, single or double pumpl PUR Systems also available with dry-air supply to maintain adhesive properties
This version has the same performances as ‘micron series’ piston pump with added special characteristics of a gear pump. It can be supplied with different pump
4 Ltr Tank
£7103.00
8 Ltr Tank
£7946.00
16 Ltr Tank
£9431.00
32 Ltr Tank
£11341.00
Prices From:
Optimise® Hotmelts& Intact®
E [email protected] W www.kmsadhesives.co.uk
Micron™PUR LC Reactive Hotmelt Tank
Recommended for use with 2kg blocks of PUR hotmelts
l Totally air-tight system for reliable melting and dispensing of PUR hotmelts – double closing lid to protect the adhesive properties
l 2 hose / gun connectionsl Variable speed gear pump allows an equal and precise glue amountl Very simple and reliable operation. No confusing set-up codesl Double-sided access doors for easy maintenance
This particular version of ‘Micron™ gear series’ has been designed to be used with 2kg PUR adhesive blocks.
Motor Control 2kg Blocks of PUR HotmeltAir Tight Lid07
Price From:
£12303.00
T 0845 381 1100 F 0845 381 3300
PS200Drum Melter
Recommended for processing of hotmelts supplied in 200ltr drums
l High melting rate and continuous output for applications that require high flow levels and speed in supplying adhesive to the substrate
l Only adhesive in contact with the platen is heated, minimising degradation
l 4 hose / gun connectionsl Single or double pumps – single pump sizes
from 1cc to 30ccl Fast drum changel Enables a constant flow of hotmelt for precise applicationl 20ltr drum version available
Macro™Gear Pump Hotmelt Tanks
Recommended for high volume melting of hotmelts
l 50 and 100ltr tank capacityl 2 dual or 4 single pumpsl Variable speed AC motorl 50-100kg / hr melting capacity , pump rate 3.6-180kg / hrl 4 hose / gun connectionsl Tank consists of 3 parts, large hopper, a pre-melt zone and main melt zone
‘Macro™ system’ series are high melt capacity units and they can be supplied with different pump capacities.
Motor Control Easy Access Option Platen Types For Varied Melt Rates
08
Price From:
£15869.00
Price From:
£34934.00
Optimise® Hotmelts
E [email protected] W www.kmsadhesives.co.uk
PS20Non-Stop Drum Unloader Pails
Recommended for use with 20ltr blocks of PUR hotmelt
The ‘Non-Stop Drum Unloader’ combines the advantage of the drum melter (controlled melting only for the adhesive that you need) with the advantage of continuous work with standard tank reservoir.
A pneumatic cylinder pushes the block against a heated melting grid in order to melt a precise quantity which goes to the tank reservoir filling it up to a prefixed level. When this level is reached, the cylinder and the heating grid are stopped (pushing and heating) while the adhesive in the tank is going out to the application head. When the low level in the tank is reached, the press-melt system is activated again.
This controlled melting system together with a moisture free atmosphere inside the tank guarantees a perfect control of the adhesive and avoids premature degradation. When the 20ltr block is finished, an internal signal advises the operator to change it. The new block can be changed without any machine stop.
Easy To Use Controls Easy Access
09
Price From:
£32084.00
Hotmelt Drum
T 0845 381 1100 F 0845 381 3300
10
Precision Hand HeldGuns
Durable and lightweight for manual dispensing or spraying of hotmelts
l 360° angle of rotation – operator friendly for repetitive gluing operations l Progressive trigger guarantees a controlled application of adhesivel Ergonomic design aids working comfort during prolonged periods of usel Safety catch to prevent accidental dispensing
Bead Gun
l For applying lines or dots of glue
Swirl Gun
l Mixes air with the glue to produce a spiral pattern of adhesive to cover large areas quickly
Swirl Gun
Bead Gun
PC Star™Glue Pattern Controller
Low cost, fully featured pattern controller ideal for all packaging applications where precise, repeatable glue patterns are required
l Shot programmer for hotmelt and cold adhesive l Variable speed applications – up to 400 mtr / minl Suitable for: Folding carton production Envelope manufacturing Folder and stationery manufacturing Book and magazine production Bag and sack manufacturing Pallet stabilisation and labelling Graphic arts l Stitching mode – lowers cost by reducing amount of adhesive needed to seal packages. Achieve the same tight seal as with continuous beads of adhesivel Lock-out function – ensures the photocell only records each product once
FreeOn-Site
AdhesiveAudits
Price From:
£1772.00
Price From:
£905.00
Price From:
£1468.00
E [email protected] W www.kmsadhesives.co.uk
11
Automatic Guns
New automatic application bead guns with compact design
l Can be supplied with different sizes and module quantity to achieve dimension and number of beads necessary for any application l Heated with large diameter cartridge resistors for a long lifel Easy maintenance and access to internal parts – need only to remove 4 screwsl Maximum compatibility with other guns in the marketl Cycle speed – up to 4800 cycles / minutes*
Microprecision™Gun – Single Module
l Reliability, precision and speed in a small spacel Dual effect activation – exclusive patented designl Recommended for rapid, high-precision machines with production speed variations and limited space for gun installa-tionl High speed and pressure – not limited by viscosity of the hot-melt or distance from the targetl Built-in filterl Total absence of leaksl Actual operating application over
AdjustableDual Module
Sift-Proof Gun
For carton sealing
l Specially designed to create a barrier seal on carton flaps – ideal for cartons containing powders, seeds and fine-grained prod-ucts such as detergents, sugar, rice and grainsl Protects the product from insect infestation and moisturel Protects from product loss during transit
Prices From:
£598.64Prices From:
£672.00
Price From:
£POA
T 0845 381 1100 F 0845 381 3300
12
A Complete Wrap-AroundHotmelt Labelling System
For PET bottles or can labelling
l Reduces adhesive consumption up to 50%l Replaces conventional carousel systems using wrap-around labelsl Eliminates contamination of adhesive and set up problems associated
with wheel / pot systemsl Tailor-made spray gun covers all your label sizes. The gun sprays the
front edge pick up point on the bottle or can, if required, a slot gun applies a ribbon coating on the back edge as it leaves the magazine
l Reduces misalignment of label, correct application every time, improving appearance
Complete System Price From:
£14846.00
Video Demo
Available
Massively
Reduces
Overall Glue
Usage!
E [email protected] W www.kmsadhesives.co.uk
13
Melter FeederAdhesive Granule Feeder
Ensures a constant level of hotmelt adhesive in the tank without operator intervention
l Avoids hotmelt pollution and charl Eliminates the need for operators to continuously refill the tankl Keeps viscosity constant and improves bondingl Operator typically refills the adhesive bin once a week eliminating the need to monitor the tank and ensure it is filled correctlyl Compatible with virtually all common hotmelt systems
EdgebandingSlot Gun
l For accurate coating of edges e.g. edgebanding, back-edge sealing, stationery pads etc.l Extremely accurate deliveryl Better temperature control than wheel methodl Provides a precise coating reducing material consumptionl No contamination of adhesive – totally enclosed systeml Can be adjusted to coat varying widths from 0-60mml Maintain consistent quality and precise temperature control
Price From:
£4171.00Price From:
£1766.00
T 0845 381 1100 F 0845 381 3300
Self Cleaning Hotmelts
14
Guaranteed
To Be Cleaner,
More Efficient
& MoreVersatileOn Balance
Deliversll More cost effective compared to a standard hotmeltl Cleanerl More bonds per kilol Save up to 70% consumption
Less is so much morewith
E [email protected] W www.kmsadhesives.co.uk
Self Cleaning Hotmelts
T 0845 381 1100
F 0845 381 3300 E [email protected]
W www.kmsadhesives.co.uk
Task: ReducePackaging Costs
Solution: Trial Optimise®
Adhesive
Contact us today to book your free on-site trial.
Works on any packaging line,
regardless of speed and maintains it’s
bond in extremes of hot and cold.
l Bonds virtually any board quality
l Optimise® simply makes more
bonds using less kilos
l Eliminates nozzle blockages –
remains clear, clean and odourless
l Costs less per bond than standard
hotmelt
& Save Up To
70%
Consumption*
*Based on previous trials.
Overall reduction depends
on application.
15
Call For A
Free Trial
Air open, spring close gun complete with module, 3 / 2 24VDC solenoid valve
Nordson® Part No. Precision™ Part No.
- M-R0005969
£625.00
Air open, air close gun complete with module5 / 2 24VDC solenoid valve
Nordson® Part No. Precision™ Part No.
- M-R0005916
£665.00
T 0845 381 1100 F 0845 381 3300
Price Guide Reduce maintenance costs with Precision™ quality parts without sacrificingproduct performance
l OEM compatible – ordering and installation couldn’t be easier l Precision™ replacement parts are brand new, not reconditioned, no returning of old parts required, saving you time, money and making it easier to do business
Air open, spring close modules for:
l Nordson® H200, H400, Classic Blue and Solid Blue
Air open, air close modules for:
l Nordson® H400, Solid Blue and Sure Bead
Modules Guns
16
Air open, spring close
Nordson® Part No. Precision™ Part No
1052925 M-106200240
£178.00
Air open, air close
Nordson® Part No. Precision™ Part No.
1052927H200 AO / AC (easy
on)
M-106300070H200 AO / AC (easy
on)
£198.00
FreeNext DayDelivery
On Orders Over
£250Ex. VAT
VeryCompetitive
Prices
Solenoid 3 / 2 way, 24v, 8.5w
Nordson® Part No. Precision™ Part No.
771109 M-771109
£95.00
Solenoid 4 way, 24v, 5.4w (Saturn type)
Nordson® Part No. Precision™ Part No.
1053894 M-1053894
£95.00
Solenoid 3 way, 24v, 5.4w (Saturn type)
Nordson® Part No. Precision™ Part No.
1069207 M-1069207
£95.00
Solenoid 24v, 5.4w (Saturn type)
Nordson® Part No. Precision™ Part No.
303010 M-303010
£95.00
E [email protected] W www.kmsadhesives.co.uk
Price Guide
Solenoid Valves
17
T 0845 381 1100 F 0845 381 3300
Price Guide
16
Straight 0.30 / 1.9 (12thou) Saturn type
Nordson® Part No. Precision™ Part No.
322112 M-105020590
£25.00
18
Single Orifice Straight Nozzle
Single Orifice 90o Right Angle Glue Nozzles Triple Glue NozzleDual Orifice Right
Angle Nozzle
Right angle 0.50 / 1.9
Nordson® Part No. Precision™ Part No.
1011020 M-105030620
£35.00
Dual orifice 0.4 x 2 x 1.9
Nordson® Part No. Precision™ Part No.
1015816 M-105030660
£65.00
Triple nozzle – all sizes available
Nordson® Part No. Precision™ Part No.
238038 M-238038
£40.00
100%Quality Tested
For Guaranteed
Accuracy
E [email protected] W www.kmsadhesives.co.uk
Price Guide
19
Size Nordson® Part No.
Precision Part No. Price
0.20 x 1.3 322008 M-105020500 STF-0.20/1.3 £25
0.25 x 1.3 322010 M-105020510 STF-0.25/1.3 £25
0.31 x 1.3 322012 M-105020520 STF-0.30/1.3 £25
0.36 x 1.3 322014 M-105020530 STF-0.35/1.3 £25
0.41 x 1.3 322016 M-105020540 STF-0.40/1.3 £25
0.46 x 1.3 322018 M-105020550 STF-0.45/1.3 £25
0.51 x 1.3 322020 M-105020560 STF-0.50/1.3 £25
0.61 x 1.3 322024 - - £25
0.20 x 1.9 - M-105020570 STF-0.20/1.9 £25
0.25 x 1.9 322110 M-105020580 STF-0.25/1.9 £25
0.31 x 1.9 322112 M-105020590 STF-0.30/1.9 £25
0.36 x 1.9 322114 M-105020600 STF-0.35/1.9 £25
0.41 x 1.9 322116 M-105020610 STF-0.40/1.9 £25
0.46 x 1.9 322118 M-105020620 STF-0.45/1.9 £25
0.51 x 1.9 322120 M-105020630 STF-0.50/1.9 £25
0.61 x 1.9 322124 M-105020740 STF-0.60/1.9 £25
0.31 x 3.8 322312 M-105020660 STF-0.30/4.0 £25
0.36 x 3.8 322314 M-105020670 STF-0.35/4.0 £25
0.41 x 3.8 322316 M-105020680 STF-0.40/4.0 £25
0.46 x 3.8 322318 M-105020690 STF-0.45/4.0 £25
0.51 x 3.8 322320 M-105020700 STF-0.50/4.0 £25
0.61 x 3.8 322324 M-105020720 STF-0.60/4.0 £25
Size Nordson® Part No.
Precision Part No. Price
0.20x1x1.9-90o 1011008 M-105030690 RA-1-0.20/1.9 £35
0.25x1x1.9-90o 1011010 M-105030700 RA-1-0.25/1.9 £35
0.31x1x1.9-90o 1011012 M-105030710 RA-1-0.30/1.9 £35
0.36x1x1.9-90o 1011014 M-105030720 RA-1-0.35/1.9 £35
0.41x1x1.9-90o 1011016 M-105030620 RA-1-0.40/1.9 £35
0.46x1x1.9-90o 1011018 M-105030450 RA-1-0.45/1.9 £35
0.51x1x1.9-90o 1011020 M-105030630 RA-1-0.50/1.9 £35
- - M-105030730 RA-1-0.55/1.9 £35
0.61x1x1.9-90o 1011024 M-105030740 RA-1-0.60/1.9 £35
0.71x1x1.9-90o 1011028 M-105030750 RA-1-0.70/1.9 £35
0.81x1x1.9-90o 1011032 M-105030760 RA-1-0.80/1.9 £35
- - M-105030770 RA-1-0.90/1.9 £35
1.02x1x1.9-90o 1011040 M-105030780 RA-1-1.0/1.9 £35
0.31x2x1.9-15o 1015812 - RA-2-0.30/1.9-15o £65
0.36x2x1.9-15o 1015814 - RA-2-0.35/1.9-15o £65
0.41x2x1.9-15o 1015816 M-105030660 RA-2-0.40/1.9-15o £65
0.46x2x1.9-15o 1015818 - RA-2-0.45/1.9-15o £65
0.51x2x1.9-15o 1015820 - RA-2-0.50/1.9-15o £65
0.61x2x1.9-15o 1015824 - RA-2-0.60/1.9-15o £65
0.71x2x1.9-15o 1015828 - RA-2-0.70/1.9-15o £65
Nozzle Cleaning Kits
Compatible
Wooden case with pin vice and 3 sets of pins
Nordson® Part No. Precision™ Part No.
901915 M-901915
£47.00
In-line filter screen, 100 mesh, pack of 5
Nordson® Part No. Precision™ Part No.
1007373 M-1007373
£55.00
T 0845 381 1100 F 0845 381 3300
Price Guide
Quick Change In-Line Filter Housing (Saturn Style) Filter Screens
20
Description Precision™ Part No.
Inline mini-filter M-1007034
£75.00
Description Precision™ Part No.
Inline mini-filter M-1007234
£75.00
Description Precision™ Part No.
Inline mini-filter M-1007231
£75.00
In-line filters remove hotmelt impurities before they reach the gun nozzles
l Easy to replace filter cartridge, unscrew and remove l Stick-proof coating ensures easy cleaningl Replaceable meshes (available in 3 sizes 50, 100 and 200 mesh)l Easily identifiable by etched markings on the upper part
E [email protected] W www.kmsadhesives.co.uk
Price Guide
21
Service
Agreements
Available
Gun heater 150W, 230V (for a single module gun)
Nordson® Part No. Precision™ Part No.
938123 M-938123
£25.00
Sensor
Nordson® Part No. Precision™ Part No.
937283 M-937283
£25.00
Gun Heater RTD Sensor
On-Site Servicing & CleaningExpensive downtime costs, no on-site engineer?We offer on-site servicing and cleaning for all hotmelt sys-tems.
Purge valve for 3000 series
Nordson® Part No. Precision™ Part No.
276024 M-10110042
£35.00
T 0845 381 1100 F 0845 381 3300
Price Guide
Purge Valve
22
Problue filter complete
Nordson® Part No. Precision™ Part No.
1028305 M-1028305
£60.00
3000 series filter complete
Nordson® Part No. Precision™ Part No.
274581 M-274581
£55.00
Filter screens (3000 series)
Nordson® Part No. Precision™ Part No.
274578 M-274578
£26.00
Quick Change In-Line Tank Filters
l Easy to replace filter cartridge, unscrew and remove
E [email protected] W www.kmsadhesives.co.uk
Price Guide
23
Purging compound for reactive hotmelt systems, helps prevent reactive PUR hotmelts
cross linking, packed in 10kg buckets
Precision™ Part No
HMC109010
£100.00
Specialist liquid cleaner for use with cured reactive hotmelts, non toxic, packed in 5ltr
drums
Precision™ Part No
HMC110005
Purge-it™ C109Purge-it™ C101 Purge-it™ C103 Purge-it™ C110
On-Site Servicing & CleaningExpensive downtime costs, no on-site engineer?We offer on-site servicing and cleaning for all hotmelt sys-tems.
Effective adhesive remover for cold application on machinery parts like tank
covers, conveyors, soaking filters and nozzles etc. based on natural solvents, 1ltr trigger
spray
Precision™ Part No
HMC101001
Wax based cleaner for use in hot application systems (jetting systems, daubers, wheels, premelters). Designed for removal of
EVA based hotmelts. Full instructions provided with each pack
Precision™ Part No
HMC102020
£130.00
8ft / 2400mm
Nordson® Part No. Precision™ Part No.
274793 M-102212040
£381.10
10ft / 3000mm
Nordson® Part No. Precision™ Part No.
274794 M-102212050
£432.60
T 0845 381 1100 F 0845 381 3300
Price Guide
24
Hoses chart
Nordson® Part No. Precision™ Part No. Length Mtrs (Ft) Price274791 M-102212020 1.2 (4ft) £278.10
274792 M-102212030 1.8 (6ft) £329.60
274793 M-102212040 2.4 (8ft) £381.10
274794 M-102212050 3.0 (10ft) £432.60
274795 M-102212060 3.6 (12ft) £484.10
274796 M-102212070 5.0 (16ft) £535.60
Automatic Heated Hoses
Other Sizes Available To Order4ft / 1200mm
Nordson® Part No. Precision™ Part No.
274791 M-102212020
£278.10
6ft / 1800mm
Nordson® Part No. Precision™ Part No.
274792 M-102212030
£329.60
Heated hosesl Standardisation and compatibility of
electrical connectionsl Wide range of accessoriesl Inner PTFE core reinforced with steel meshl Different diameters available
E [email protected] W www.kmsadhesives.co.uk
Total TurnkeySolutions
25
Total Turnkey SolutionsKMS® has helped numerous companies to overcome production problems, increasing their efficiency and cost effectiveness.
Our experience of a huge variety of production line scenarios gives us a unique ability to develop the ideas that will significantly improve your production processes.
Planning and designWhether you have a production line problem you cannot seem to overcome, or whether you are simply looking for ideas to make your production more efficient.
Manufacturing and specificationVery often, we are able to specify and supply a wide range of production line equipment such as conveyors, gantries, glue guns and advanced adhesives.
Before After
Cleaning Service
More important tasks to do than cleaning or servicing hotmelt equipment?In addition to supplying compatible spare parts KMS® offer a cleaning and reconditioning service for tanks and glue heads. A special process removes burnt on adhesive and board fibres that have accumulated on the components. Quick turnaround.
Cleaning Service
T 0845 381 1100 F 0845 381 3300
26
ProlongThe LifeOf Your
Equipment
& ReduceCosts
FreeOn-Site
AdhesiveAudits
E [email protected] W www.kmsadhesives.co.uk
27
Changing Adhesives
Changing Adhesives?
Use Standard Hotmelts
Call For
A Copy Of
Our Full
Catalogue
l Keeps tanks cleanl Prevents nozzle blockagesl keep production going™l Reduces total costs
l Burns and clogs nozzlel Smells - can contaminate food productsl Causes unnecessary downtimel Costs more than optimise® hotmelts
Vs
T 0845 381 1100F 0845 381 3300 E [email protected] www.kmsadhesives.co.uk
KMS AdhesivesBlenheim House,Threxton Road Industrial Estate,Watton, Norfolk, IP25 6NG
© KMS® 2012.The Stickfast®, Intact®, Optimise®, Jetmark™, Fall Stop™, IV Tape™, Cooltabs™, Purge-it™, Precision™, Thermoset™, Total™ and KMS® logos and names are registered trademarks and trademarks of KMS®. This publication and technical datasheets are covered by copyright and must not be reproduced or copied, in part or whole, by photocopying, electronic reproduction, mechanical reproduction or any other means, without the written permission of KMS®. The information contained in this publication is for guidance only. It is the user’s responsibility to carry out confirmation trials to establish the product’s suitability for its intended use. Due to our continual improvement program some products may be different to those shown in this product guide.