Upload
others
View
2
Download
0
Embed Size (px)
Citation preview
Architectural Detail ManualJanuary 2009 JELD-WEN reserves the right to change specifications without notice. Page 1-1
TABLE OF CONTENTS
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2
Quick Spec Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-3
Elevations: 1/4” Scale
Double-Hung . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-4
Double-Hung - Florida Sizes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-6
Grille Patterns . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-7
Section Details: 6” Scale . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-8
Installation Wall Details . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-20
Premium Atlantic Aluminum
Double-Hung Windows
Page through the PDF using the buttons on the right,or click a topic above to go directly to that page.
Architectural Detail ManualJanuary 2009 JELD-WEN reserves the right to change specifications without notice. Page 1-2
PRODUCT SPECIFICATIONS
MATERIALS
White and MB-40 bronze electrostatically applied baked polyesterpaint.
FRAME
All frames are mechanically assembled with a gasket and a secondarysilicone seal for added assurance of weather tight performance. Theframe jamb width is 2-7/8” (73mm), and the nominal extrusionexterior wall thickness is 0.063”. The frame incorporates a 1/2” frontflange for typical Florida installations into block construction. Asloped sill with weep holes are in the frame to ensure standing wateris directed to the exterior plane of the unit. Optional frame types:slip-on nailing fin.
SASH
The double-hung sash is a nominal 1-1/8” (28.65mm) thickness. It ismechanically fastened for added strength and durability, and siliconesealed to ensure weather tight performance.
GLAZING
5/8” (15.9mm) insulated glass consists of two lites of glass sealedaround a spacer. 1/8” (3mm) and 3/16” (5mm) monolithic glazing.The glass is mounted into the sash using a silicone-glazing compound.The insulating glass units comply with the performance requirementsof the IGCC in accordance with either ASTM E774 or E2190. All unitsare exterior glazed.
GLAZING OPTIONS
5/8” (15.9mm) insulated glass is available in clear, Low-E or Low-E 366,tinted, obscure or other specialty insulating glass as specified. 1/8”(3mm) and 3/16” (5mm) monolithic glazing. Many glass options areavailable in tempered glazing, monolithic, or Impact Resistant glass.
WEATHER-STRIPPING
A fin-pile weather-strip is applied to sash jamb, sash interlocks, andmain head/sill.
HARDWARE
A single action cam style lock is available on all windows. Block andTackle balance systems are utilized to support the vertical operationof the sash. Head/Sill latches are standard for Impact units. Sill latchesare optional for non-Impact units.
INSECT SCREENS
The exterior fiberglass charcoal color insect screen is set in analuminum frame to match the color of the unit. The spring loadedscreen system assists in keeping it secured to the window. Insectscreens are intended to allow air and light in and keep insects out.They are not intended to keep anyone or anything from fallingthrough an open door or window. For safety screens or other securitydevices contact your local building supply retailer.
GRILLES
GBG (Grilles between the Glass) - 5/8” (16mm) and 7/8” (22.2mm) flatgrilles mounted between the glass panes suspended within the aircavity and color matched to the extrusion color.
SDL (Simulated Divided Lite) 1” (25.4mm) vinyl contour outside/flatinside muntins surface mounted on the exterior surfaces of the singleglazed impact glass unit to provide a true divided lite appearance.Available in white only.
DA (Double Applied) - Aluminum 7/8” double applied flat/flat bar isapplied to the exterior of the single glazed glass to give the detail ofa true divided look.
ADDITIONAL ACCESSORIES
Please contact your local building supply retailer for a completelisting of the additional accessories. See www.jeld-wen.com/findsupplier.
INSTALLATION
See www.jeld-wen.com/resources for instructions.
PERFORMANCE
Please reference www.jeld-wen.com/performanceratings for up todate Design Pressure and approval information.
Double-Hung Windows
Premium Atlantic Aluminum
Architectural Detail ManualJanuary 2009 JELD-WEN reserves the right to change specifications without notice. Page 1-3
QUICK SPEC GUIDE
SPECIFICATION STANDARD FEATURESOPTIONAL FEATURES
Some options may require additional lead times.Consult your JELD-WEN Sales Representative.
COLOR S WhiteS Bronze
SIZE S Width: 24” - 53”S Height: 24” - 89”
FRAME S 1/2” Flange S Slip-On Fin
GLAZING S 1/8” Single-Glaze Clear S 5/8” InsulatedS 3/16” Single-GlazeS 5/16” ImpactGard Single-GlazeS 7/16” ImpactGard Single-GlazeS Low-E InsulatedS BronzeS GrayS GreenS ObscureS AzurliteS Graylite (Turtle)S Bronze Reflective
All glass is available tempered
IMPACTGARDPROTECTION
S PVB ImpactS SGP Impact Single-Glaze
Not available in tempered.PVB monolithic not available in Low-E.
All other tint and obscure glazing options apply.
HARDWARE S Cam-LockS Block & Tackle Balance
HARDWARE COLOR S Matches Frame
SCREENS S Fiberglass
SCREEN FRAME COLOR S Matches Frame
GRILLES S SDL - 1” Simulated Divided Lite available only inwhite and only on impact resistant units
S Double Applied Flat/Flat BarS 5/8”, 7/8” Flat GBG*S 5/8” Contour
*Check for availability
JAMB S 2-7/8”
Double-Hung Windows
Premium Atlantic Aluminum
Architectural Detail ManualJanuary 2009 JELD-WEN reserves the right to change specifications without notice. Page 1-4
DAYLIGHT OPENINGFRAME SIZE
ROUGH OPENINGUNIT SIZE
18”(457)23”(584)
23 1/2”(597)24”(610)
6DH2424 6DH3024 6DH3624 6DH4224 6DH4824 6DH5424
6DH2430 6DH3030 6DH3630 6DH4230 6DH4830 6DH5430
6DH2436 6DH3036 6DH3636 6DH4236 6DH4836 6DH5436
6DH2442 6DH3042 6DH3642 6DH4242 6DH4842 6DH5442
6DH2448 6DH3048 6DH3648 6DH4248 6DH4848 6DH5448
6DH2454 6DH3054 6DH3654 6DH4254 6DH4854 6DH5454
6DH2460 6DH3060 6DH3660 6DH4260 6DH4860 6DH5460
73/
8”(1
87)
23”(
584)
231/
2”(5
97)
24”(
610)
24”(610)29”(737)
29 1/2”(749)30”(762)
30”(762)35”(889)
35 1/2”(902)36”(914)
36”(914)41”(1041)
41 1/2”(1054)42”(1067)
42”(1067)47”(1194)
47 1/2”(1207)48”(1219)
48”(1219)53”(1346)
53 1/2”(1359)54”(1372)
63/
4”(1
71)
103/
8”(2
64)
29”(
737)
291/
2”(7
49)
30”(
762)
93/
4”(2
48)
133/
8”(3
40)
35”(
889)
351/
2”(9
02)
36”(
914)
123/
4”(3
24)
163/
8”(4
16)
41”(
1041
)41
1/2”
(105
4)42
”(10
67)
153/
4”(4
00)
193/
8”(4
92)
47”(
1194
)47
1/2”
(120
7)48
”(12
19)
183/
4”(4
76)
223/
8”(5
68)
53”(
1346
)53
1/2”
(135
9)54
”(13
72)
213/
4”(5
52)
253/
8”(6
45)
59”(
1499
)59
1/2”
(151
1)60
”(15
24)
243/
4”(6
29)
ELEVATION SYMBOL LEGEND:
VALUES IN () ARE IN MILLIMETER CONVERSIONS.
DOUBLE-HUNG
Premium Atlantic Aluminum
SCALE: 1/4” = 1’
Double-Hung Windows
Architectural Detail ManualJanuary 2009 JELD-WEN reserves the right to change specifications without notice. Page 1-5
DOUBLE-HUNG
6DH2472 6DH3072 6DH3672 6DH4272 6DH4872 6DH5472
6DH2476 6DH3076 6DH3676 6DH4276 6DH4876 6DH5476
6DH2484 6DH3084 6DH3684 6DH4284 6DH4884 6DH5484
6DH2490 6DH3090 6DH3690 6DH4290 6DH4890 6DH5490
DAYLIGHT OPENINGFRAME SIZE
ROUGH OPENINGUNIT SIZE
EEE E E
EEE E E
EEE E E
EEE E
18”(457)23”(584)
23 1/2”(597)24”(610)
24”(610)29”(737)
29 1/2”(749)30”(762)
30”(762)35”(889)
35 1/2”(902)36”(914)
36”(914)41”(1041)
41 1/2”(1054)42”(1067)
42”(1067)47”(1194)
47 1/2”(1207)48”(1219)
48”(1219)53”(1346)
53 1/2”(1359)54”(1372)
313/
8”(7
97)
71”(
1803
)71
1/2”
(186
1)72
”(18
29)
303/
4”(7
81)
333/
8”(8
48)
75”(
1905
)75
1/2”
(191
8)76
”(19
30)
323/
4”(8
32)
373/
8”(9
49)
83”(
2108
)83
1/2”
(212
1)84
”(21
34)
363/
4”(9
33)
403/
8”(1
026)
89”(
2261
)89
1/2”
(227
3)90
”(22
86)
393/
4”(1
010)
ELEVATION SYMBOL LEGEND:
E UNIT MEETS EGRESS REQUIREMENTS FOR IRC CODE. STATE AND LOCAL EGRESS CODES MAY DIFFER. ALWAYS REFER TO LOCAL BUILDING CODES FOR COMPLETE REQUIREMENTS.CHECK WITH LOCAL OFFICIALS TO ENSURE COMPLIANCE BEFORE INSTALLING THE UNIT.
VALUES IN () ARE IN MILLIMETER CONVERSIONS.
Premium Atlantic Aluminum
SCALE: 1/4” = 1’
Double-Hung Windows
Architectural Detail ManualJanuary 2009 JELD-WEN reserves the right to change specifications without notice. Page 1-6
DOUBLE-HUNG - FLORIDA SIZES
ELEVATION SYMBOL LEGEND:
E UNIT MEETS EGRESS REQUIREMENTS FOR IRC CODE. STATE AND LOCAL EGRESS CODES MAY DIFFER. ALWAYS REFER TO LOCAL BUILDING CODES FOR COMPLETE REQUIREMENTS.CHECK WITH LOCAL OFFICIALS TO ENSURE COMPLIANCE BEFORE INSTALLING THE UNIT.
VALUES IN () ARE IN MILLIMETER CONVERSIONS.
DAYLIGHT OPENINGFRAME SIZE
ROUGH OPENINGUNIT SIZE
12 27/32”(326)18 1/8”(460)18 5/8”(473)19 1/8”(486)
83/
32”(
206)
25”(
635)
251/
2”(6
48)
26”(
660)
20 7/32”(514)25 1/2”(648)
26”(660)26 1/2”(673)
30 23/32”(780)36”(914)
36 1/2”(927)37”(940)
46 27/32”(1190)52 1/8”(1324)52 5/8”(1337)53 1/8”(1349)
149/
32”(
363)
373/
8”(9
49)
377/
8”(9
62)
383/
8”(9
75)
2013
/32”
(519
)49
5/8”
(126
0)50
1/8”
(127
3)50
5/8”
(128
6)6DH-12 6DH-H32 6DH-22 6DH-32
6DH-13 6DH-H33 6DH-23 6DH-33
6DH-14 6DH-H34 6DH-249-E 6DH-349-E
6DH-15 6DH-H35 6DH-25 6DH-35
6DH-16S 6DH-H36S 6DH-26S 6DH-36S
6DH-16 6DH-H36 6DH-26 6DH-36
EE
E E
E E
715
/32”
(190
)12
21/3
2”(3
21)
1925
/32”
(502
)26
3/32
”(66
3)62
”(15
75)
621/
2”(1
588)
63”(
1600
)
2515
/32”
(647
)31
3/32
”(79
0)71
”(18
03)
711/
2”(1
861)
72”(
1829
)
3015
/32”
(774
)33
3/32
”(84
1)75
”(19
05)
751/
2”(1
918)
76”(
1930
)
3215
/32”
(824
)
Premium Atlantic Aluminum
SCALE: 1/4” = 1’
Double-Hung Windows
JELD-WEN reserves the right to change specifications without notice. Page 1-7Architectural Detail ManualJanuary 2009
STANDARD PRAIRIE PRAIRIE SASH
COLONIAL TOP SASHCOLONIAL TOP SASH1/2 LITE
GRILLE PATTERNS
Premium Atlantic Aluminum
Double-Hung Windows
JELD-WEN reserves the right to change specifications without notice. Page 1-8Architectural Detail ManualJanuary 2009
2 13/16”
13/16”
1 13/16”
2 13/16”
13/16”
1 13/16”
VERTICAL SECTION
Fram
eSi
ze
Roug
hO
peni
ng
Sash
Size
Gla
ssSi
ze
Day
light
Ope
ning
Gla
ssSi
ze
Day
light
Ope
ning
Scre
enSi
ze
Uni
tSi
ze
Sash
Size
1/2”
1 5/16”5/16”
1”
11/16”
11/16”
1 5/16”
9/16”
1 5/16”
11/16”
11/16”
1 5/16”
1 3/16”
1/8”
1/8”
DOUBLE-HUNGFLANGE - SINGLE-GLAZE
Premium Atlantic Aluminum
Double-Hung Windows
SCALE: 6” = 1’
JELD-WEN reserves the right to change specifications without notice. Page 1-9Architectural Detail ManualJanuary 2009
13/16”
1 3/4”
2 3/4”
13/16”
1 3/4”
Frame Size
Rough Opening
Sash Size
Glass Size
Daylight Opening
HORIZONTAL SECTION
Glass Size
Daylight Opening
Screen Size
Unit Size
1/4” 1/4”
3/4”
1”
11/16”
3/4”
1”
11/16”
15/16”
3/8”
1”
11/16” 11/16”
1”
5/16”
15/16”
1/8”
1/8”
2 3/4”
DOUBLE-HUNGFLANGE - SINGLE-GLAZE
Premium Atlantic Aluminum
Double-Hung Windows
SCALE: 6” = 1’
JELD-WEN reserves the right to change specifications without notice. Page 1-10Architectural Detail ManualJanuary 2009
2 13/16”
13/16”
1 13/16”
2 13/16”
13/16”
1 13/16”
VERTICAL SECTION
1/8”
5/8”
1/8”
5/8”
Fram
eSi
ze
Roug
hO
peni
ng
Sash
Size
Gla
ssSi
ze
Day
light
Ope
ning
Gla
ssSi
ze
Day
light
Ope
ning
Scre
enSi
ze
Uni
tSi
ze
Sash
Size
1/2”
11/16”
1 5/16”
11/16”
1 5/16”
1 3/16”
9/16”
1 5/16”
11/16”
11/16”
1”
5/8”
3/4”
DOUBLE-HUNGFLANGE - INSULATED
Premium Atlantic Aluminum
Double-Hung Windows
SCALE: 6” = 1’
JELD-WEN reserves the right to change specifications without notice. Page 1-11Architectural Detail ManualJanuary 2009
13/16”
1 3/4”
2 3/4”
13/16”
1 3/4”
1/8”
5/8”
1/8”
5/8”
Frame Size
Rough Opening
Sash Size
Glass Size
Daylight Opening
HORIZONTAL SECTION
Glass Size
Daylight Opening
Sash Size
Screen Size
Unit Size
1/4” 1/4”
3/4”
1”
11/16” 11/16”
1”
3/4”
11/16” 11/16”
1”
5/16”
15/16”
1”
3/8”
15/16”
2 3/4”
DOUBLE-HUNGFLANGE - INSULATED
Premium Atlantic Aluminum
Double-Hung Windows
SCALE: 6” = 1’
JELD-WEN reserves the right to change specifications without notice. Page 1-12Architectural Detail ManualJanuary 2009
VERTICAL SECTION
2 13/16”
1”
1 3/4”
2 13/16”
1”
1 3/4”
Fram
eSi
ze
Roug
hO
peni
ng
Sash
Size
Gla
ssSi
ze
Day
light
Ope
ning
Gla
ssSi
ze
Day
light
Ope
ning
Scre
enSi
ze
Uni
tSi
ze
Sash
Size
1/2”2 1/16”
5/16”
1”
11/16”
11/16”
1 5/16”
1 5/16”
1 3/16”
1 5/16”
11/16”
11/16”
1 5/16”
1/8”
1/8”
DOUBLE-HUNGSLIP ON NAIL FIN - SINGLE-GLAZE
Premium Atlantic Aluminum
Double-Hung Windows
SCALE: 6” = 1’
JELD-WEN reserves the right to change specifications without notice. Page 1-13Architectural Detail ManualJanuary 2009
1”
1 11/16”
2 3/4”
1”
1 11/16”
Frame Size
Rough Opening
Sash Size
Glass Size
Daylight Opening
HORIZONTAL SECTION
Glass Size
Daylight Opening
Sash Size
Screen Size
Unit Size
1/4” 1/4”
3/4”
1”
11/16”
3/4”
1”
11/16”
1 11/16”
3/8”
1”
11/16” 11/16”
1”
5/16”
1 11/16”
1/8”
1/8”
2 3/4”
DOUBLE-HUNGSLIP ON NAIL FIN - SINGLE-GLAZE
Premium Atlantic Aluminum
Double-Hung Windows
SCALE: 6” = 1’
JELD-WEN reserves the right to change specifications without notice. Page 1-14Architectural Detail ManualJanuary 2009
VERTICAL SECTION
2 13/16”
1”
1 3/4”
2 13/16”
1”
1 3/4”
1/8”
5/8”
1/8”
5/8”
Fram
eSi
ze
Roug
hO
peni
ng
Sash
Size
Gla
ssSi
ze
Day
light
Ope
ning
Gla
ssSi
ze
Day
light
Ope
ning
Scre
enSi
ze
Uni
tSi
ze
Sash
Size
1 1/2”
5/8”
1”
11/16”
11/16”
1 5/16”
1 5/16”
1 5/16”
11/16”
11/16”
1 5/16”
1 3/16”
1/2”
DOUBLE-HUNGSLIP ON NAIL FIN - INSULATED
Premium Atlantic Aluminum
Double-Hung Windows
SCALE: 6” = 1’
JELD-WEN reserves the right to change specifications without notice. Page 1-15Architectural Detail ManualJanuary 2009
1”
1 11/16”
2 3/4”
1”
1 11/16”
1/8”
5/8”
1/8”
5/8”
Frame Size
Rough Opening
Sash Size
Glass Size
Daylight Opening
HORIZONTAL SECTION
Glass Size
Daylight Opening
Sash Size
Screen Size
Unit Size
1/4” 1/4”
1 11/16”
3/8”
1”
11/16” 11/16”
1”
1 11/16”
11/16”
1”
3/4”
11/16”
1”
3/8”
3/4”
2 3/4”
DOUBLE-HUNGSLIP ON NAIL FIN - INSULATED
Premium Atlantic Aluminum
Double-Hung Windows
SCALE: 6” = 1’
JELD-WEN reserves the right to change specifications without notice. Page 1-16Architectural Detail ManualJanuary 2009
VERTICAL SECTION
1/8”
5/16”
1/8”
5/16”
2 13/16”
13/16”
1 13/16”
2 13/16”
1 13/16”
13/16”
Fram
eSi
ze
Roug
hO
peni
ng
Sash
Size
Gla
ssSi
ze
Day
light
Ope
ning
Gla
ssSi
ze
Day
light
Ope
ning
Scre
enSi
ze
Uni
tSi
ze
Sash
Size
1/2”
7/8”
1 5/16”
7/8”
1 5/16”
1 3/16”
9/16”
1 5/16”
7/8”
7/8”
1”
5/8”
3/4”
DOUBLE-HUNG - FLORIDA SIZESFLANGE - IMPACT
Premium Atlantic Aluminum
Double-Hung Windows
SCALE: 6” = 1’
JELD-WEN reserves the right to change specifications without notice. Page 1-17Architectural Detail ManualJanuary 2009
1/8”
5/16”
1/8”
5/16”
13/16”
1 3/4”
2 3/4”
13/16”
1 3/4”
Frame Size
Rough Opening
Sash Size
Glass Size
Daylight Opening
HORIZONTAL SECTION
Glass Size
Daylight Opening
Sash Size
Screen Size
Unit Size
1/4” 1/4”
3/4”
1”
7/8”
1”
3/4”
7/8”
1”
5/16”
15/16”7/8”
1”
3/8”
15/16”
7/8”
2 3/4”
DOUBLE-HUNG - FLORIDA SIZESFLANGE - IMPACT
Premium Atlantic Aluminum
Double-Hung Windows
SCALE: 6” = 1’
JELD-WEN reserves the right to change specifications without notice. Page 1-18Architectural Detail ManualJanuary 2009
2 13/16”
1”
1 3/4”
2 13/16”
1”
1 3/4”
VERTICAL SECTION
5/16”
1/8”
5/16”
1/8”
Fram
eSi
ze
Roug
hO
peni
ng
Sash
Size
Gla
ssSi
ze
Day
light
Ope
ning
Gla
ssSi
ze
Day
light
Ope
ning
Scre
enSi
ze
Uni
tSi
ze
Sash
Size
1/2”
7/8”
1 5/16”
1 3/16”
7/8”
1 5/16”
1 5/16”
7/8”
7/8”
1”
5/8”
1 1/2”
1 5/16”
DOUBLE-HUNG - FLORIDA SIZESSLIP ON NAIL FIN - IMPACT
Premium Atlantic Aluminum
Double-Hung Windows
SCALE: 6” = 1’
JELD-WEN reserves the right to change specifications without notice. Page 1-19Architectural Detail ManualJanuary 2009
1”
1 11/16”
2 3/4”
1”
1 11/16”
1/8”
5/16”
1/8”
5/16”
Frame Size
Rough Opening
Sash Size
Glass Size
Daylight Opening
HORIZONTAL SECTION
Glass Size
Daylight Opening
Sash Size
Screen Size
Unit Size
1/4” 1/4”
3/4”
1”
7/8”
1”
3/4”
1 11/16”
5/16”
1”
7/8”7/8”
1”
3/8”
1 11/16”
7/8”
2 3/4”
DOUBLE-HUNG - FLORIDA SIZESSLIP ON NAIL FIN - IMPACT
Premium Atlantic Aluminum
Double-Hung Windows
SCALE: 6” = 1’
Architectural Detail ManualJanuary 2009 JELD-WEN reserves the right to change specifications without notice. Page 1-20
Fram
eSi
zeRo
ugh
Ope
ning
1/4”
1/4”
Frame SizeRough Opening
7° MIN. SLOPE
DRAIN MAT, TO TERMINATE OVERCONTINUOUS MOISTURE BARRIER(WEATHER PLANE OF BUILDING)BY OTHERS
LOW EXPANSIONFOAM BY OTHERS
WINDOW SECURED WITHANGLE BRACKET BY OTHERS
LOW PRESSURE FOAMBY OTHERS
WOOD TRIMBY OTHERS
Details shown are for representation only and intended to reflect basicinstallation concepts. Proper installation and maintenance of JELD-WENproducts are essential if optimum performance is to be fully attained. Writteninstallation instructions that provide guidelines are available on our websiteat www.jeld-wen.com/resources.
VERTICAL SECTION
HORIZONTAL SECTION
Doors and windows to be installed per latestrevision of ASTM E2112. STANDARD PRACTICEFOR INSTALLATION OF EXTERIOR WINDOWS,DOORS AND SKYLIGHTS.
Weather plane flashing must provide a continuousseal between weather plane of fenestration productand weather plane of wall system.
All metal to metal joints must be sealed afterinstallation, this includes, but is not limited to dripcaps and mullion covers.
Job site ”Frame to Frame” Mull joints must besilicon sealed between frames.
JELD-WEN recommends all window products beinstalled with a sill pan or equivalent must includeback dam and side dams @ 7/8”.
INSTALLATION:
1/4” 1/4”
SEALANT & BACKERROD BY OTHERS
SEALANT AND BACKERROD BY OTHERS
SEALANT AND BACKERROD BY OTHERS
NOTE: Please refer to the JELD-WEN web site forinstallation instructions at: www.jeld-wen.com
INSTALLATION WALL DETAILCMU
Double-Hung Windows
Premium Atlantic Aluminum
Architectural Detail ManualJanuary 2009 JELD-WEN reserves the right to change specifications without notice. Page 1-21
Fram
eSi
zeRo
ugh
Ope
ning
1/4”
1/4”
LOW EXPANSIONFOAM BY OTHERS
LOW PRESSURE FOAMBY OTHERS
Details shown are for representation only and intended to reflect basicinstallation concepts. Proper installation and maintenance of JELD-WENproducts are essential if optimum performance is to be fully attained. Writteninstallation instructions that provide guidelines are available on our websiteat www.jeld-wen.com/resources.
VERTICAL SECTION
HORIZONTAL SECTION
Doors and windows to be installed per latestrevision of ASTM E2112. STANDARD PRACTICEFOR INSTALLATION OF EXTERIOR WINDOWS,DOORS AND SKYLIGHTS.
Weather plane flashing must provide a continuousseal between weather plane of fenestration productand weather plane of wall system.
All metal to metal joints must be sealed afterinstallation, this includes, but is not limited to dripcaps and mullion covers.
Job site ”Frame to Frame” Mull joints must besilicon sealed between frames.
JELD-WEN recommends all window products beinstalled with a sill pan or equivalent must includeback dam and side dams @ 7/8”.
INSTALLATION:
SEALANT BY OTHERS
CONTINUOUSMOISTURE BARRIERBY OTHERS
CONTINUOUSSEALANT BEHIND NAILFIN, ALL SIDES, BYOTHERS
SELF-ADHESIVEFLASHING OVER NAILFLANGE BY OTHERS
WOOD SILL AND TRIMBY OTHERSTHRU WALL FLASHING
BY OTHERS
CONTINUOUS BEADOF SEALANTBETWEEN NAIL FINAND DRAIN MAT
CONTINUOUSMOISTURE BARRIERBY OTHERS
Frame SizeRough Opening
1/4” 1/4”
CONTINUOUS SEALANT ANDBACKER ROD BY OTHERS
CONTINUOUS SEALANT ANDBACKER ROD BY OTHERS
SEALANT & BACKERROD BY OTHERS
DRAIN MAT, TO TERMINATE OVERCONTINUOUS MOISTURE BARRIER(WEATHER PLANE OF BUILDING)BY OTHERS
NOTE: Please refer to the JELD-WEN web site forinstallation instructions at: www.jeld-wen.com
INSTALLATION WALL DETAILLAP SIDING
Double-Hung Windows
Premium Atlantic Aluminum
Architectural Detail ManualJanuary 2009 JELD-WEN reserves the right to change specifications without notice. Page 1-22
Fram
eSi
zeRo
ugh
Ope
ning
1/4”
1/4”
LOW PRESSURE FOAMBY OTHERS
Details shown are for representation only and intended to reflect basicinstallation concepts. Proper installation and maintenance of JELD-WENproducts are essential if optimum performance is to be fully attained. Writteninstallation instructions that provide guidelines are available on our websiteat www.jeld-wen.com/resources.
VERTICAL SECTION
HORIZONTAL SECTION
Doors and windows to be installed per latestrevision of ASTM E2112. STANDARD PRACTICEFOR INSTALLATION OF EXTERIOR WINDOWS,DOORS AND SKYLIGHTS.
Weather plane flashing must provide a continuousseal between weather plane of fenestration productand weather plane of wall system.
All metal to metal joints must be sealed afterinstallation, this includes, but is not limited to dripcaps and mullion covers.
Job site ”Frame to Frame” Mull joints must besilicon sealed between frames.
JELD-WEN recommends all window products beinstalled with a sill pan or equivalent must includeback dam and side dams @ 7/8”.
INSTALLATION:
WOOD SILL AND TRIMBY OTHERS
Frame SizeRough Opening
1/4” 1/4”
CONTINUOUSMOISTURE BARRIERBY OTHERS
CONTINUOUSSEALANT BEHIND NAILFIN, ALL SIDES, BYOTHERS
SELF-ADHESIVEFLASHING OVER NAILFLANGE BY OTHERS
LOW EXPANSIONFOAM BY OTHERS
CONTINUOUS BEADOF SEALANTBETWEEN NAIL FINAND DRAIN MAT
CONTINUOUSMOISTURE BARRIERBY OTHERS
CONTINUOUS SEALANT ANDBACKER ROD BY OTHERS
CONTINUOUS SEALANT AND BACKERROD BY OTHERS
CONTINUOUS SEALANT ANDBACKER ROD BY OTHERS
DRAIN MAT, TO TERMINATE OVERCONTINUOUS MOISTURE BARRIER(WEATHER PLANE OF BUILDING)BY OTHERS
NOTE: Please refer to the JELD-WEN web site forinstallation instructions at: www.jeld-wen.com
INSTALLATION WALL DETAILSTUCCO
Double-Hung Windows
Premium Atlantic Aluminum