Upload
phungnguyet
View
215
Download
0
Embed Size (px)
Citation preview
Premium Masking Tape
High Performance rubber-base adhesiveSaturated semi crepe paperTemperature Resistance up to 110° C. (30 min.) 90° C. (60 min.) Excellent adhesion & mechanical featuresCompatible with all popular paints and lacquersExcellent conformability on irregular surfaces
Instant adhesion to all vehicle surfaces and good holding powerConforms well to curved surfaces without lifting or tearingCompatible with waterborne and solvent-based coatingsControlled unwindEasy clean removal without adhesive residuesSharp and clean paint edges
Sun Yellow
30 min. 60 min. 110° C. 90° C.
Q1® Product Number Q1® Product DescriptionMTQ148 48mm x 50 m – 20 roll/ caseMTQ136 36mm x 50 m – 24 roll/ caseMTQ124 24mm x 50 m – 36 roll/ caseMTQ118 18mm x 50 m – 48 roll/ case
Characteristics Units Std.Values Toler Test methodTotal Weight g/m2 92 + 8% ISO 536Total Thickness µm 125 + 10% AFERA 5006MD tensile strenght N/cm >28 AFERA 5004MD elongation at break % >8 AFERA 5004Adhesion to steel plate N/cm >2.2 AFERA 5001
Q1® Premium Masking Tape has been designed to combine consistent unwinding, easy tear and conformability, performing extremely well when used tape on tape and with masking paper and protective film.
Premium crepe paper masking tape with rubber base adhesive, specific for automotive car refinishing applications during drying cycles at high temperatures up to 110°C. It guarantees high adhesion and doesn’t leave adhesive traces when removed.
Features
Benefits
Available Colour
Temperature Resistance
Product Reference
Technical Data Sheet
Premium Foam Masking Tape
Traditional Masking Tape vs. Foam Masking Tape
Specially designed polyurethane foam structureHighly absorbent to avoid any leaking and paint runsFlexibleEasy/clean removalSolvent resistantEasy roll release in a box dispenser80°C temp rating
Easy to shape on contours, mask and seal all jambsGood adhesion to vehicle surfaces and able to withstand paint booth bake cyclesPrevents overspray from penetrating into the jambImproved productivity by reducing the time required to mask jambs with tape and masking paperLeaves no residue
White
80° C.
Q1® Product Number Q1® Product DescriptionSE02 13mm x 50 m – box
Foam FeaturesResult Units Norm Specification Density Kg/m3 UNE-EN ISO 845 28+–2 29.30 Hardness KPa UNE-EN ISO 33861 4.5+–0.5 4.08 Def. Remaining % UNE-EN ISO 1586-A <5 4.90 High Tensile KPa DIN 53571 >150 228Adhesive Description Colour/Base Smell Adhesive thermo fusible Transparent/block polymer Oudourless at room – it melts with heat temperatureFoam phisical Temperature Viscosityconstants 180°C 8000+–1000 mPas. 170°C 11000+–1500 mPas.Chemical resistance Water Acid/Base Fats/Oils D. Aliphatic D. Aromatics D. Alcohols Excellent Good Good Poor Poor Good
Q1® Premium Foam Masking Tape is designed to protect door edges and gaps from overspray while providing a smooth edge reducing time to complete the job. Mask jambs and other apertures quickly and increase profitability.
Traditional flat masking tape can leave paint lines when used inside apertures, or must be rolled in order to create a sort of soft edge. Thanks to its construction, Q1® Premium Foam Masking Tape creates an edge faster than other classic jamb masking techniques. Also dust and other contaminants are sealed in, preventing them from damaging paint job. The tape can also be left in place during the final prep phase to help reduce compound and polish from entering jamb areas.
Features
Benefits
Available Colour
Temperature Resistance
Product Reference
Technical Data Sheet
Premium Trim Masking 10 MM
High Performance rubber-based adhesiveSpecially treated paper backingTemperature Resistance up to 110° C. (30 min.) 90° C. (60 min.) Pre-perforated for easy tear offVery flexible to follow contours and tight curvesSelf-dispensing box Easy lifting tab & tape
Resists moisture and solventsPrevents paint bridging to moulding, no bleed-throughConforms to curved surfaces without lifting or tearing One size fits all mouldingsQuick application, no cutting tool neededSave time and labour cost of removing mouldingsEliminate visible paint edge
Sun Yellow
30 min. 60 min. 110° C. 90° C.
Q1® Product Number Q1® Product DescriptionTT01 10mm hard tab x 10 m – 72 roll/ case
Characteristics Units Std.Values Toler Test methodTotal Weight g/m2 92 + 8% ISO 536Total Thickness µm 125 + 10% AFERA 5006MD tensile strenght N/cm >28 AFERA 5004MD elongation at break % >8 AFERA 5004Adhesion to steel plate N/cm >2.2 AFERA 5001
Q1® Premium Trim Masking is designed to facilitate trim masking situation including: inset door handles, windscreen, side mouldings, taillight, sidelight and headlight units allowing complete paint coverage under the moulding while protecting the front of the moulding from paint overspray.
Composed by a plastic strip on a self-adhesive tape and a flexible polyester band of 190 my and a width of 10mm, thermal class B (130º c). Thanks to its characteristics the tape supports temperatures up to 110°C without leaving any residue.
For an easy application it is pre-cut every 38mm.
Features
Benefits
Available Colour
Temperature Resistance
Product Reference
Technical Data Sheet
Premium Masking Drop Film
Excellent adhesionTemperature Resistance up to 110° C. (30 min.) 90° C. (60 min.) Easy/clean removalSolvent resistantEasy roll releaseStatic cling
Good mechanical strengthLeaves no residuePaint will not bleedEasy to apply
Tape: Sun Yellow | Film: Clear
30 min. 60 min. 110° C. 90° C.
Q1® Product Number Q1® Product DescriptionMDF0260 60cm x 25 yds– 20 roll/ caseMDF02180 180cm x 25 yds– 20 roll/ case
Characteristics Units Std.Values Toler Test methodTotal Weight g/m2 92 + 8% ISO 536Total Thickness µm 125 + 10% AFERA 5006MD tensile strenght N/cm >28 AFERA 5004MD elongation at break % >8 AFERA 5004Adhesion to steel plate N/cm >2.2 AFERA 5001
Q1® Premium Masking Drop Film is the perfect tool to protect parts of the vehicle that do not require to be painted.
The HDPE film has an electrostatic charge to attract the film on to the vehicle surface for a safe application and thanks to corona treatment, provides strong adherence of the paint to the film.
Features
Benefits
Available Colour
Temperature Resistance
Product Reference
Technical Data Sheet
Premium Masking Paper
High quality 50gsm Kraft masking paperSpecially treated paperExcellent resistance to base coats, clear coats, urethanes and water based paintsThin paperTightly bonded paper
Good penetration resistanceGood conformabilityLint and fibre freeHelps reduce rework caused by bleed-throughEasy to handle to help improve productivityHelps eliminate rework caused by fiber contamination in paint job
Kraft Brown
Q1® Product Number Q1® Product DescriptionMP0245 45 cm x 200 mMP0290 90 cm x 200 mMP02120 120 cm x 200 m
Substance g/qm 48–52 DIN EN ISO 536:2012Tensile strenght md N/15mm >22 DIN EN ISO 1924–2:2009Tensile strenght cd N/15mm >11 DIN EN ISO 1924–2:2009cd / md relation % >40 Breaking lenght md mtr. >3.100 DIN EN ISO 1924–2:2009Breaking lenght cd mtr. >1.600 DIN EN ISO 1924–2:2009Breaking lenght average mtr. >2.350 DIN EN ISO 1924–2:2009Burst strenght abs. kPa >65 DIN EN ISO 2758:2014Burst strenght rel. kg/qcm >1.3 DIN EN ISO 2758:2014Air resistance (bendtsen) ml/min 200–600 DIN 53120–1:1998Sizing COBB 60 g/qm 15–25 DIN EN ISO 2758:2014
Q1® Premium Masking Paper is a high quality 50 gsm paper, created for automotive aftermarket applications.
It is designed to offer protection against primers, varnishes and both water and solvent based paints. The tightly bonded paper protects against fibre contamination and conforms easily to irregular surfaces.
Features
Benefits
Available Colour
Product Reference
Technical Data Sheet
Premium Protective Film
Corona treatment to obtain maximum adhesion of paint Translucent to assist in the moving of vehiclesSheeting clings to the vehicle and has centred printing to help with alignmentExcellent adhesionTemperature rating +110 C°Solvent resistantEasy roll release
Paint absorbentResists tearingResistant to solventsNo bleed-throughEasy to use dispenser box – Fast ApplicationStatically charged for easy masking
Clear
110° C
Q1® Product Number Q1® Product DescriptionPF024 4m x 150 m / boxPF025 5m x 120 m / box
Properties Measuring Units Value Measuring methodDensity g/cm3 0.95 FollowingThickness µm 9 microns FollowingTensile strenght machine direction N/mm2 70 FollowingTensile strenght transverse direction N/mm2 28 FollowingElongation at break machine direction % 422 FollowingElongation at break transverse direction % 893 FollowingDart drop g/µm 3.45 FollowingTemperature stability C° 110
Q1® Premium Protecting Film is a clear HDPE protective sheet treated to ensure paint adhesion of both solvent and waterborne paints specific for vehicle painting jobs.
It has an excellent paint adhesion due to its electrostatic property result of corona treatment and the composition of the raw material with specific additives.
Q1® Premium Masking film clings to vehicles and has centred printing to help with alignment.
Features
Benefits
Available Colour
Temperature Resistance
Product Reference
Technical Data Sheet