1

Energy Efficiency Measures

Prepared for SIDBI

By

Triodos Facet, IIEC, adelphi

2

Table of Contents

Table of Contents....................................................................................................................................2

Energy Efficiency Measures – List 1.........................................................................................................3

Energy Efficiency Measures – List 2.......................................................................................................16

Annex I How to use this Guide on EE Equipment/ Technology ..............................................................42

Annex II List of Suppliers.........................................................................................................................43

3

Energy Efficiency Measures – List 1The EE equipment/ technologies presented below as Energy Efficiency Measures – List 1 will clear(in most of the cases) the eligible criteria of KfW EE LoC – 3 t CO2 emission reduction per year perone lakh invested. However, the consultants recommend use of EE & CP Assessment tool forevery project.

Sl.No.

Eligible Equipment/Technology

EnergySavingPotential(%)

Benefits Specifications EquipmentSupplier

1 Medium frequencyend-bar heater

~5-15% In built Heat retainsystem,Digitalcounter forproduction,Variablespeed, automatic beltdriven scanner forforging

19

2 Vertical Shaft BrickKiln

~50% uniform temperature,occupy less space,less drying time, lesspollution

70

3 Insulation for Kiln, TopChamber & Furnace

~3-10% Heat loss reduction,improve safety,prevents damage toequipment fromexposure to fire orcorrosive atmosphere

IS 9428,IS8154,BS3958, ASTMC533- 90

182, 196

4 Low Thermal-massCars

~15-20% Productivityimprovement, reducecycle time

5 Variable FrequencyDrives for CirculationAir Fans in VerticalDryer

~15-35% Energy savingdepends on themotor loading, reducemotor heating andstress

JEM201, 225,226, 227,C62.41.2-2002

65, 88

6 Roller Kiln (byReplacingConventional Tunnel

~ 50% Productivityimprovement, reducecycle time to half

202, 235

4

Sl.No.

Eligible Equipment/Technology

EnergySavingPotential(%)

Benefits Specifications EquipmentSupplier

Kiln)

7 Alumina BrickInsulation for ElectricArc Furnace

~3-5% Reduce heat loss,improve safety, bettertemperature control,prevents damage toequipment fromexposure to fire orcorrosive atmosphere

206

8 Improved Insulationfor Ring Chamber

~3-5% Minimizescondensation,Protects air ring chamber

182, 196

9 Control Instrumentsfor Firing System

~5-10% Productivityimprovement, qualityimprovement, redcuecycle time

203

10 BEE 5 Star rated airconditioner

~20-40% Less on / off cycle,better indoor airquality, low noisepollution

SEER 16-23,IEC 60335-2-40

59,180, 338

11 BEE 5 Star ratedrefrigerators

~20% Precise temperatureand defrost control,improve insulation

BEE rating (5star), IS 15750:2000

134, 277

12 Variable frequencydrives

~30-40% Extended equipmentlife, reducedmaintenance,reduced peakdemand, safetyagainst powerfluctuations

JEM201, 225,226,227,C62.41.2-2002

5, 285, 296,115

13 Energy efficientmotors

~3-7% Longer life, lessermaintenance, lessvibration and highreliability

JISC4212 Over98% HighVoltage, IS12615, IS 325,IS4722, IEC 34,IEEMA : 19-2000, EFF1,BS EN 60034-1:2004

14 Amorphous core ~70% Improve efficiency at IS 2026, 1180, 171, 297, 351

5

Sl.No.

Eligible Equipment/Technology

EnergySavingPotential(%)

Benefits Specifications EquipmentSupplier

transformers no & low loadcondition

11171; IEC60076; ANSIC57.12.20

15 T5 fluorescent tubelights with electronicballast

~25% Longer life, less heatproduced

Luminousefficiency over60 lm/w, JIS C7601:2004

123, 236, 317

16 Compact fluorescentlamps

~25% Produce little to noheat

Luminousefficiency over80 lm/w,IEC/TS 62257-12-1 Ed.1.0:2007

138, 236. 317

17 Metal halide lamps ~25% Longer life, equallysuited for indoor andoutdoor use

Luminousefficiency over60 lm/w, IEC61167 Ed.1.0:1992 (b),ANSIC78.1382-1996, ANSIC78.1376-1996, ANSIC78.1384-1997, ANSIC78.1379-1997, ANSIC78.1377-1996, ANSIC78.1378-1997, ANSIC78.1375-1996, ANSIC78.1374-1996, ANSIC78.1372-1997

138, 236. 317

18 High/Low pressuresodium vapor lamps

~25% Long life, emits morelight energy in theyellow/orange/redregion of thespectrum

Luminousefficiency over110 lm/w, IEC60662 Ed.1.1:2002 (b)

138, 236. 317

19 Light emitting diode ~90% High reliability, highlyrugged, produce noUV radiation and littleheat

BS EN 61347-2-13, ANSI/UL8750

138, 236. 317

6

Sl.No.

Eligible Equipment/Technology

EnergySavingPotential(%)

Benefits Specifications EquipmentSupplier

20 Exclusive transformerfor lighting

~15% Compact, easy toinstall, power qualityenhancement,provide speed/torquecontrol, safetyenhancement

JIS C8109:1999

5, 225, 285

21 Electronic ballast ~35% Low internal coreloss, improved lightoutput quality,operate at a muchhigher frequency thanmagnetic ballasts,instant glow with noflickering increasestube life, no heatgenerated

JIS C8117:2008 , IS13021 : Part 1 :1991, IS 13021: Part 2 : 1991,IEC 60929

121, 155, 291

22 Soft starter for motors ~15% Provides smooth andstepless accelerationand deacceleration ofAC Induction Motor,less mechanicalstress, improvedpower factor, lowermaximum demand

IEC 60947-1,IEC 60947-4-2,EN 60947- 1,EN 60947-4-2,UL 508, CSAC22.2 No. 14 -M91, LRS00/00154

5, 285, 296

23 Automatictemperature controller

~10% Accurate temperatureregulation, prolongslife of equipment

BS EN14597:2005

97, 198, 367,115

24 High frequencymelting furnace

~10-15% Small volume, lessenvironmentalpollution

ISO TC 244,ISO/NP13577/13578/13579, IEC60519-1

97, 152, 237

25 Electromagneticirradiation (Microwaveheating/Infraredheating)

~50% Selective heating(heats water ratherthan substrate orsurrounding air), idealfor materials withnon-uniform moisturecontent

9, 94, 326

26 Heat of CompressionAir Dryers (ReplacingDesiccant Air Dryer)

~40% Replacement ofdesiccant air drierwith refrigerateddryer, less

312, 192

7

Sl.No.

Eligible Equipment/Technology

EnergySavingPotential(%)

Benefits Specifications EquipmentSupplier

maintenance as nomoving parts

27 Variable FrequencyDrive for Oil Pimp inHydraulic Power Pacs

~25-30% Smooth start / stop,increase life

JEM201, 225,226, 227,C62.41.2-2002

120

28 Variable FrequencyDrive for Hot AirCirculation Fan forPreheating Furnace

~25-30% Smooth start / stop,increase life

JEM201, 225,226, 227,C62.41.2-2002

99, 343

29 Ceramic FiberInsulation for BatchFurnaces

~2-4% Reduce surfacetemperature,minimised convention& radiation losses,improve safety

354, 268

30 Turning Machine withVariable FrequencyDrive withRegenerative BrakingSystem

~30-35% Variable frequencydrive, high speedmachining

10

31 Gasifier Based HeatTreatment Furnace

~20-30% Utilize clean energy 101, 293

32 Improved Oven withHeat RecoveryEquipment (PuffedRice)

~15-45% Improve in quality,reduce breakage,reduce pollution

135

33 Oil Fired Oven;Biomass FueledMultipurpose Drier;Energy Efficient WoodFired Low CostBakery Oven (BakeryProductsManufacturing)

~30-50% Less woodconsumption,improve in workingenvironment

272

34 Energy Efficient Boilerwith Heat Recovery(Cashew Processing)

~20-30% Reduce equipmentsize, reduce auxiliaryenergy consumption,reduce pollution

IS 14492:1997 333

35 Energy Efficient Boilerwith Heat Recovery(Parboiled Rice Mill)

~20-30% Reduce equipmentsize, reduce auxiliaryenergy consumption,

IS 14492:1997 333

8

Sl.No.

Eligible Equipment/Technology

EnergySavingPotential(%)

Benefits Specifications EquipmentSupplier

reduce pollution

36 Biomass GasifierBased Furnace(Namkeen Making)

~35-60% Utilize clean energy 30, 255

37 Air Dryer –Refrigerated AirCompressor Type

~0-40% Provides pressuredewpoint down to4°C, display to readdewpoint / operatingstatus / faultindication

74

38 Heat RecoverySystem forAircondenser

~20-30% Improve workingenvironment

39 Improved Oil Burners(Biscuit Plant)

~5-10% Completecombustion, improveworking environment,improve productivity

15, 361

40 Fluidized Bed HeatTreatment Line withControlledAtmosphere &Recuperators (HeatTreatment)

~50-75% Flexible operation tohandle small batche,controlledatmosphere minimizedecarburisation,require less space,reduce scale loss

16, 249

41 Medium FrequencyInduction Heaters(Heat Treatment)

~10% Rapid heating andquenching, lessoxidation loss,improve quality, lowoperating cost,

IEC 62076 Ed.1.0 b:2006, ISOTC 244,ISO/NP13577/13578/13579, IEC60519-1

82, 93

42 Bell AnnealingFurnace

~20-30% Uniform temperature,improve & consistentproduct quality,efficient use offurnace by cooling ininner cover, requireless space

JIS B6911:1999, IS10810

198, 325, 361

43 kWh indicator for ~ 5 - 10% Monitoring & control 5

9

Sl.No.

Eligible Equipment/Technology

EnergySavingPotential(%)

Benefits Specifications EquipmentSupplier

induction furnace of electrical energyconsumption

44 Medium frequencyinduction furnace(replacing cupola)

~ 2 - 7% Cost saving byelimination ofelectrodes

MagnalenzInductionFurnace

152, 189

45 Oil fired core dryingoven

~ 50% Complete combustioneasy to operate, lowmaintenance cost,better product quality

210, 221

46 Gas fired Aluminiummelting furnace

~ 5 - 30% Reduction in ThermalEnergy consumption

Mode ofoperation:Batch/Continuous,Capacity : 2 to1000 Kg/hrswith PID controlsystem andAutomaticOn/OFF

96

47 Induction furnace withcooling tower & watertreatment plant

~ 10 -25%

Flexibility to produceferrous castings,flexibility to selectcharge mix, bettermelt quality

Design as perrequirement

287, 361

48 Induction ladlerefining furnace

~ 10 -25%

Value added casting,eco friendly

ASME SA516/SA516M-07 MTLTV ZT

82, 97

49 Intensive mixers(Molding/Core)

~ 10% Reduce defectivecasting, better castsurface finish

156, 306

50 Induction hardeningequipment (100kW,500 Hz to 3kHz)

~ 95% Higher productivity,consistency inquality, can lead tosaving in heat-treatment operation

45, 72

51 Removable hearthtype chamber (withcomputer compatibletemperaturecontroller)

~ 5 - 15% Better temperaturecontrol, improvequality

Design as perrequirement

361

52 Online shot blastingmachine (for cleaning

~ 20% Airless centrifugalsuitable for cleaning

113, 232

10

Sl.No.

Eligible Equipment/Technology

EnergySavingPotential(%)

Benefits Specifications EquipmentSupplier

the returns) railway and powertransmission casting

53 Variable speed sandmixer

~ 10 -30%

Improved flowability,permeability,reducedoperating moisturelevel, efficient mixing

269

54 Computer controlledsand cooler-mixer

269

55 Waste heat recoveryfrom regenerativetank

~10-15% Utilization of wasteheat, reduction in fluegas equipment sizes

85, 101

56 Waste heat recoveryfrom recuperative tank

~10-15% Utilization of wasteheat, Reduction influe gas equipmentsizes, Reduction infuel consumption

85, 101

57 Insulation for furnace ~3-10% Reduce heat loss,improve safety, bettertemperature control,prevent damage toequipment fromexposure to fire orcorrosive atmosphere

IS 9428,IS8154,BS3958, ASTMC533- 90. AZSrefractorybrickssupported withCeramic Fiber

182, 196

58 Natural gas firedmuffle furnace

~20% Utilize clean energysource, productivityimprovement, lessharmuful to workforce

IS & A ST M 332, 12

59 Thermal gasifier(biomass/coal as fuel)

~35-60% Utilize clean energy 40, 255

60 Automatic controllers& recorders forfurnace temperature/On-line oxygenanalyzer

~3-10% Productivityimprovement, furnaceefficiencyimprovement

149

61 Steam Heating(Replace ElectricalHeating)

~20% Steam can bedistributed throughouta heating system withlittle change in

UL 2096,ASME BPVCSEC VIII D1

257, 333, 347

11

Sl.No.

Eligible Equipment/Technology

EnergySavingPotential(%)

Benefits Specifications EquipmentSupplier

temperature,erminalunits can be added orremoved withoutmaking basicchanges to thedesign

62 Temperature ControlDrying Oven

~10% Prodcue betterquality, longequipment life, lowheat loss

BS EN14597:2005

122, 197, 198

63 Natural Gas BasedOven

~10-15% Reduction in no loadlosses, decrerasedrejection rate

IS 4473 : 2002 77, 101, 221

64 Microprocessor BasedElectric Furnace

~10% High reliability, betterquality production,measurement &controls / alarm

IEC 60239 Ed.4.0:2005 (b),IEC 60676 Ed.2.0, ISO TC244, ISO/NP13577/13578/13579

82, 97, 327

65 Thermic Fluid Boileror Steam Boiler usingAgri Residue

~80-84% Fuel flexibility, heatsroll uniformly

DIN 4754 333, 339, 347

66 Flash Dryers orRotary VacuumDryers(Product Drying)

~28-64% Low cost instantdrying with nopulverizing, low initialinvestment ascompared to spraydryer, control batchdrying process,control of materialtemperature

IEC 296, BS148

257, 290, 313

67 Use of BiomassGasifier with SlurryEconomizer(Incinerator)

~70% Utilize agricultural &industrial waste, heatrecovery system,eco- friendly, carboncredits can be earned

30, 153, 304

12

Sl.No.

Eligible Equipment/Technology

EnergySavingPotential(%)

Benefits Specifications EquipmentSupplier

68 Infra Red Heaters /Oven

~30-40% Reduce cycle time IEC 60335-2-25 194

69 Seven-effect FreeFlow Falling FilmEvaporator

~50% Liquid does not getoverheated due toshort hold-up time

13, 257, 290

70 Conversion toFluidized BedCombustion Boilerfrom Stoker Boiler

~5-8% Less corrosion anderosion, easier ashremoval, low excessair, fast response toload fluctuations, useof low grade fuel

BS EN 45510-3- 3:2000

333, 339, 347

71 Heat recovery boilersfor waste combustion

~25-30% Reduction inequipment size,reduction in auxillaryenergy consumption

NSF/ANSI 5 159

72 High concentrationsize press

~50% High-concentrationsize fluid, reduceddrying load, andmakes high- speedcoating possible

159, 58

73 Dryer with dryer barsinstalled inside forpaper makingmachine

~15-20% By installing 25 barson one-third of thedryers, productivity isincreased by 20%and specific steamcon-sumption isdecreased by 20%

159

74 Steam recompressionheat pump

~20-25% The hood on thedryers is sealed tominimize the leakageof air from outside.The circulating wateris recycled back tothe condenser top

159

75 Integration of punchedmetal screen, slitscreen andmaceration machinefor processing waste

~26-31% Shorter operationperiod and energysaving

159

13

Sl.No.

Eligible Equipment/Technology

EnergySavingPotential(%)

Benefits Specifications EquipmentSupplier

paper

76 Pusher TypeReheating Furnacewith SuspendedRoof,Multi FuelCapacity andAutomatedTemperature Controls

~20-30% Reduce scale loss IS 1786:1985(clause 3.1)

24, 100

77 Provision of IRSensors for MaterialMovement

~3-7% Quality improvement,waste minimization

Meets IP 31,IEC standard

194

78 AC and DC Drives forControl of Fuel andAir

~10-30% Eliminate voltage dip,reduce starting shockon motor / coupling /gear, improveprocess control,reduce motor heating/ stress

65, 88

79 Liquid and GaseousFuel Ratio Controllers(Ratiotrols)

~5-10% Reduce scale loss 79, 361

80 High EfficiencyBurners with MultifuelCapacity

~5-10% Multi fuel handlingcapacity

361, 15

81 High EfficiencyAtomizers inHumidification Plant

~10-20% No cleaning required,1/3 water flowrequired, lower flowdue to betteratomization,atomized waterdensity is adjusted

9, 27, 321

82 Variable FrequencyDrive forHumidification Fan

~25-30% Eliminates externalhumidificationcontroller

JEM201, 225,226, 227,C62.41.2-2002

344

83 Synthic Flat BeltDrives(Replace V-belts)

~4-8% Extraordinary tensileand high frictional co-efficient, light weightand narrower widthreduce shaft load

DIN III, ISO 100 173

14

Sl.No.

Eligible Equipment/Technology

EnergySavingPotential(%)

Benefits Specifications EquipmentSupplier

84 Variable FrequencyDrive for AutocoreSuction Motor

~15-20% Smooth start / stopoperation, betterprocess control

JEM201, 225,226, 227,C62.41.2-2002

5, 344

85 Variable FrequencyDrive for WaterCirculating Pump

~25-30% Smooth start / stopoperation, betterprocess control

JEM201, 225,226, 227,C62.41.2-2002

5, 344

86 Transvector NozzleforCleaning Application

~5-10% Sucks atmosphericair along with airjet,reduce airconsumption by 50%

355

87 Fludised BedCombustion Boiler(replacing StokerBoiler)

~4% Efficiencyimprovement by 70-79%

Design as perrequirement

98, 103, 199

88 Modern IndustrialHumidification System(for ControllingRelative Humidity &Temperature)

~90-95% Ease to maintain,longer life, multipleaxial fans with directdrive, PVC diffusers

105, 276

89 Radio Frequency /Infrared Radiant GasFired / Microwave /Loop / Relax Dryer(Finishing)

~15-20% Optimum residualshrinkage with softer,fuller, bulkier handleof fabrics, shapestability

320

90 Heat RecoverySystemfor Stenters

~30% Utilise waste heat 320

91 Biomass GasifierBased Hot WaterGenerator

~5-20% Reduce cost ofoperation, reduceauxiliary energyconsumption, reduceFuel consumption

140, 339

92 Water tube boilerreplacing smoke tubeboiler

~10-25% Handle high pressureand hightemperature, recoverfaster than smoke-tube

ISO R831, IS2825,TIMA, BS EN12952-1:2001,ASTM A192/A192M,ASME

270, 333,347

15

BPVCSEC I

93 Recuperators ~12-15% Increase in overallefficiency

BIS IS12392:1988 (R2000),BIS IS6728:1972(R2002),UNI8729:1997, UNI8729:1997, UNI8448:1991, NFE 38200:1987

2 101, 151,175

94 Automatic combustioncontrol for boilers/furnaces

~5-10% Ensures optimal fueland air ratio, reducefuel wastage, safe &stable operation,improves equipmentlife

JIS B8412:1981, ISAMC96.1

101, 324,367, 115

95 Regenerative burnersfor furnace

~30% Increase inproduction, furnacessize smaller for newinstallations

BS EN267:1999,40 CFR266.102

50, 91, 361

96 Thermal insulation forhot & cold systems

~6-10% Reduces surfaceheat loss, emissionsand increase safety

IS,BS,ASTM

101, 182,205

16

Energy Efficiency Measures – List 2The EE equipment/ technologies presented below as Energy Efficiency Measures – List 2 are likelyto clear the eligible criteria of KfW EE LoC – 3 t CO2 emission reduction per year per one lakhinvested, but the plant specific present conditions significantly influence the calculation. In thesecases use of EE & CP Assessment tool developed by the consultants is recommended to evaluatethe proposal.

Sl.No.

Eligible Equipment/Technology

EnergySavingPotential(%)

Benefits Specifications EquipmentSupplier

101 Falling FilmEvaporator (Re-refining of LubricatingOil)

~5-10% High heat transferrate, lower liquidcirculation rates(smaller pump),suitable at lowtemperaturedifference

CE & FDACertified

69, 257

102 Wiped FilmEvaporator (Re-refining of LubricatingOil)

~5-10% Evaporation at lowtemperature, shortresidence time, selfcleaning or wiping ofheat transfer surface,suitable for viscousliquid

69, 257

103 Fine Grinding (CBNSurface GrindingMachine)

~10-30% Better surface finish,less material loss

ANSI B11.9 6, 39, 167

104 Gas Fired / OilCrucible MeltingFurnace

~5-30% Superior fuelefficiency, precisetemperature control,central axis tilting orlip axis hydraulictilting type furnaceare excellent formelting & pouringdirectly into molds

96

105 AutomaticElectrostatic PowderCoating Machine

~10-15% Uniform & deeppower penetration,higher transferefficiency, qualityfinish

BS EN1953:1999

119

106 Conveyorised PowderCoating Curing Oven

~5% Precise temperaturecontrol, longerfunctionality

1, 265

17

Sl.No.

Eligible Equipment/Technology

EnergySavingPotential(%)

Benefits Specifications EquipmentSupplier

107 Sealed QuenchFurnace (use ofThyristor PowerController and PLC)

~15-25% Prevent oxideformation astreatment is inprotectiveatmosphere,automatic operationof treatment /transfer, quickchange-over, requireless space

EN ISO 9001 158, 340,361

108 Heavy Duty InjectionPump Test Bench(with VariableFrequency Drive)

~15-25% Variable speed drive,expandablecompound pulleysystem, dual beltfitting, auto align

55, 190

109 Continuous GasCarburising Furnacewith EndogasGenerator

~25-30% PLC automaticsystem with Hmi &computer controlled

EN ISO 2639 336, 349

110 Electronic SpringCoiling machines

UNE–EN-ISO8750,NASM10971,NASM51923,NAS1407,ASME B18.8.2,ASMEB18.8.3M

44

111 Ballmill with HighAlumina Tile Lining,High Alumina Balls ofDifferent Size (RawMaterial Processing)

~10-15% Improvement ingrinding, reduction ingrinding time

178, 244

112 Humidity DriverChamber (Drying)

~25-30% Less drying time, lesstiles breakage

348

113 Gas / Oil Fired RollerHearth Kiln (FiringSection)

~ 30% Uniform temperaturedistribution, ease ofoperation

187, 260

114 Gas / Oil Fired ShuttleKiln (Firing Section)

~20-30% Lower maintanance,productivityimprovement

85, 101

115 Continuous Tunnel ~20-30% Higher safety, easy to 217

18

Sl.No.

Eligible Equipment/Technology

EnergySavingPotential(%)

Benefits Specifications EquipmentSupplier

Dryer with IndirectFired Hot AirGenerator

operate, lessmaintenance

116 Vertical VibratingMachine

~15-25% High productivity, 15-20% material saving,better quality spigotand socket

ASTM C 76 252, 318,357

117 Building energymanagement system

~20-35% Controls - lighting,HVAC, lift, securitymanagement system,facility management,reduce operation cost

BS EN15603:2008,BS EN 15316-4-4:2007, BSR/ASHRAE/IESNA 90.1-1989R,ANSI/ASHRAE/IESNA Standard100-2006

164, 285,296

118 Heat reclaimventilation/airconditioning system

~80% Compact, smooth &quiet operation, goodindoor air quality,load reduction 20-30% of airconditioning load

68, 147, 180

119 Forming plasticinsulator

~30-40% Durable & moistureresistant

JIS A9511:2006R/AMENDMENT1:2009,ANSI/UL 1256,ASTM C666,ASTM E96,CAN/ ULC-S704, ASTMC1289

83, 182, 226

120 Heat insulatingopening material

~35% Thermal insulationstops transfer of heatbetween inside &outside room

ASTM E96,CAN/ ULC-S704, ASTMC1289

64, 322

121 Air sealing supportmaterial

~30-40% Controls hot or coldtemperatures, fillscracks and crevicespreventing bugs andvermices from

ASTMC 1029,IS 13205,CAN/ULC-S704, ASTMC1289

83, 182, 226

19

Sl.No.

Eligible Equipment/Technology

EnergySavingPotential(%)

Benefits Specifications EquipmentSupplier

entering home

122 Heat absorbing glass/low emissivity glass(window panel)

~30-50% Makes room warmerin winter and coolerin summer

E’MARK (ECE43), DOTMARK(AMERICANNATIONALSTANDARD),JIS/ JASO(JAPANESESTANDARD),ASTM C552 -07

37, 17, 275

123 Energy efficient aircompressors/blowers

~30-50% Easy to install andoperate

ASME B19.1 42, 145, 233

124 Energy efficiencyfans/pumps

~25-30% Lesser heatgenerated, reducedmaintenancerequirements

IEC 60335-2-40

99,288, 343

125 Highly sensitive andresponsive arcfurnace

~10-15% Reduce electrodeusage and refractorywear, wide range ofcurrent setting, hotand cold phasecompensation, longerfurnace life

IEC 60239 Ed.4.0:2005 (b) ,IEC 60676 Ed.2.0, ISO TC244, ISO/NP13577/13578/13579

82, 97, 327

126 High performanceelectrolytic furnace

~25-30% Uninterruptedproduction & betterproduct quality,prolonged equipmentlife

ISO TC 244,ISO/NP13577/13578/13579

23, 97, 327

127 Enginator based onnatural gas

~30% Increase in fuelefficiency due to useof cleaner fuel

84,

128 Vacuum formingmachine withthermostat control

~30-40% PLC controlled, easyto operate,

46, 274, 141

129 Edge bander sprintwith power PC control

~95% Fast heat-up time 146

20

Sl.No.

Eligible Equipment/Technology

EnergySavingPotential(%)

Benefits Specifications EquipmentSupplier

130 Automatic Ring Sizingand Loading Machine

~45-50% Higher productivity,require lessmaintenance

53

131 Vacuum Holding forNon-FerrousComponents for HighSpeed Milling

~25-30% Higher productivity,higher accuracy

ASTM E1417,ASTM E415,ASTM E1444,SAE J429,ANSI/ISO/ IEC17025, ANSI/NCSL Z-540-1,ANSI/ ASME

104

132 Inverter BasedWelding Machine

~60% Faster response time,low ripple, smaller insize & lighter inweight henceportable, better weldquality

IGBT-400.IGBT-500,IGBT-600

356

133 Double PolishingMachine (with InverterControl)

~30% High efficiency andHigh quality productoutput

250

134 Semi Automatic PillarType Hydraulic HotMoulding Press (withPLC Control)

~30-40% High product qualityand high productefficiency

110

135 Spice Grinding(Cryogenic Grinding,Automatic FFSPackaging)

~20-30% Improve productquality, increase inproduction by 2 / 3times, improveproduct shelf life

216

136 Replacing Semi-mechanisation toMechanisation BakeryProcess,Replacement of Coal /Wood Fired Oven toOil Fired / ElectricOven, Biomass Firedmultipurpose Drier,Energy Efficient LowCost BakeryOven (Wood Fired)

~25-40% Improve productivity& quality, require lessmanpower

248, 282

21

Sl.No.

Eligible Equipment/Technology

EnergySavingPotential(%)

Benefits Specifications EquipmentSupplier

Installation of Qualit

137 Cashew Processing(Boiler, HeatExchanger withCompleteAccessories,Packaging Machine,etc.)

~15-30% Improve productivity& quality, require lessmanpower

7, 345

138 Rice Milling withRubber Roller SumSheller (WithoutParboiling) andModern Rice Millingwith Parboiling (PaddyCleaner, Destoner,Rubber Roller CumSheller, PaddySeparator, Boiler,Par- boiling System,Dryer, Colour Sorter,Cone Polisher, QualityControl)

~10-30% Improve productquality

234

139 Fryer Machine withConveyor Belt &Bucket Elevator(Namkeen)

~20-25% Precise processcontrol, easy tooperate, improveproduct quality

87, 92

140 Palates - Kukure LineMachine with PackingUnit

~20-25% Improved productivityand quality

92

141 Packing Machine -Bag Maker & Weigher

~10-15% Improve productivity& quality, highprecision, improveproduct self life

IEC 6113 20, 127

142 Namkeen MixingMachine

~30-40% Uniform mixing, Easyto operate

92

143 Oil Fired Rotary RackOven

~15-30% Uniform baking,improve qualitythrough proper airdistribution,

139, 214

144 Prover ~0-35% Separate system forheating & humidity,durable & reliable

IEC# 118650 66, 218

22

Sl.No.

Eligible Equipment/Technology

EnergySavingPotential(%)

Benefits Specifications EquipmentSupplier

145 Spiral Mixer ~5-10% Improve qualitythroughhomogeneousmixture

IEC# 117769 144

146 Automatic Rinsing,Filling & CappingMachine for PETBottles

~10-15% Improve productivity& quantity, easy tooperate & control

IEC 380/400 B+ N + PE / 50Hz

195, 239

147 Automatic Rinsing,Filling & CappingMachine for Glassbottles

~10-15% Improve productivity& quantity, easy tooperate & control

195, 239

148 Shrink SleeveInserting Machine

~10-15% Improve productivity& quantity, easy tooperate & control

57

149 Dough Sheeter ~10-30% Variable speedmachine, chromiumplated rolling cylinderregulates to pressand roll thin or thickdough perfectly,scraper can easilyremoved to clean

36, 66

150 Rotary Rack Oven ~30-40% Illuminating elementsoutside main heatingchamber with offfacility

IEC# 117995 36, 66, 248

151 Deck Oven ~25-30% Special burner,improvedcompartment design

ASTM F1965,IEC# 118652

36, 66

152 Planetary Mixer ~30-40% Performs efficientmixing, interlockedsafety guard,emergency stop,motor cooling systemto ensure safe &smooth function

IEC117575 ,DIN EN454:2010

36, 66

153 Cookie Drop ~25-30% Adjustable speed &time of depositingroller, adjustablespeed of nozzlerotation

66, 128

23

Sl.No.

Eligible Equipment/Technology

EnergySavingPotential(%)

Benefits Specifications EquipmentSupplier

154 Cashew PeelingMachine with ScrewCompressor

~25-40% Increase temperatureautomatically in shorttime span,continuously dutycycle, maintenance &clearing easily

350, 352

155 Carbon MolecuarSieve for NitrogenGeneration

~10-15% Improve quality,longer life, lowmaintenance

211

156 MechanicalPneumatic ClutchOperated Crank TypeBillet Shearing Press(Stock Cutting)

~15% Higher productivity,lower cutting loss,lesser wear &maintenance, reduceoperating cost

ANSI B11.4,AS4024.3002-2009

63, 263,264, 292

157 Pneumatic DoubleActing Hammer(Forge shop)

~30% Higher productivity,less maintenancecost, high forgingaccuracy, higher blowfrequency, easy &safe operation

IEC 61158 212, 238

158 Microprocessor BasedEnergy Controlled,Pneumatic ClutchOperated, ScrewFriction Presses(Forge Shop)

~25% High productivity,controlled blowpattern, lessmanpower skillrequirement

78, 136,219

159 Hydraulic DoubleActing Hammer(Forge Shop)

~60% Precision forging,high productivity,reduce maintenance

32, 133, 177

160 Hot ShearingAutomatic ForgingPresses (Forge Shop)

~15-20% Lower operation cost,require lessmanpower, highproductivity, bettercontrol systems

AS 4024.3002 2, 263, 264,280

161 Reduce RollingMachine (Forge Shop)

~20-30% Higher productivity,require lessmanpower, operationat various crosssectional area &length

2, 301, 303

162 Gas Fired High ~10-15% Reduce scale loss, DEF STAN 02- 77, 101,

24

Sl.No.

Eligible Equipment/Technology

EnergySavingPotential(%)

Benefits Specifications EquipmentSupplier

Temperature Furnacewith AutomaticTemperatureController & Recorder(Heat Treatment)

facilitate automation,quality improvement

746, BS EN14597:2005

198

163 Natural Gas FiredPower Generating Set(Utility)

~30-70% Eco-friendly, lowpower generationcost, high fuelefficiency

ISO 3046-1,VDE 0530

67, 130,311

164 Electro DischargeMachine (Tool Room)

~40-60% Precision machining,improve quality,higher productivity

DIN EN 12957,JIS B 6361-2:1999

258, 278,284

165 Thread RollingMachine

~20-30% Increase in materialhardness, smoothsurface finish, chipnot formed

IS 11715,12296, 8405

267, 301,258

166 Friction Drop Hammer ~20% Suitable for precisionforging, longerdurability

BIS IS 11372,PN 81/ M-66800

63, 262,358

167 SimultaneousJolt/Squeezemoulding machine

~ 10% Higher productivity,dimensionalaccuracy, less skillrequirement

174, 331

168 Spun pipe castingmacihne

~ 10 -15%

Easy to install,resistance tocorrosion, highimpact resistance,durable with highload taking capacity

184, 186

169 Automatic pouringsystem

~ 10 -15% Higher-quality castingwith precisionpouring, eliminatesunderpours andwasteful overpours

P³™ ControlTechnology -AutomaticPouring system

152, 306

170 Automatic flasklessmolding machine

~ 15% Higher productionefficiency, moldhardness is excess of85

ASTM D3359Standards

306, 371

171 Core setter andautomatic mold

~ 5 - 15% High-precision mouldtransport with noshifting, distortion or

EN-60204.1/92and the IECdirectives IEC-

80, 306

25

Sl.No.

Eligible Equipment/Technology

EnergySavingPotential(%)

Benefits Specifications EquipmentSupplier

conveyor displacement ofmoulds

204.1/92.

172 Compact verticalmoulding machine

~ 15 -20%

Higher productioncapacity upto 350moulds/hour(uncored), PLCsystem for optimumproduction, lessspace requirement

AWS D1.1/D1.1M:2010 •CSA Z662-11IEC 61496-3:2008. EN ISO3744:2009. ISO3744:1994

80, 371

173 Automatic cold boxcore shooter

~ 5 -15% Can shoot in volumeof 5 to 20 kgs, theaverage cycle time isfrom 10 secondonwards withoutgassing, shoot andexhaust

Design as perrequirement

118, 117,306

174 Electrically heated dieheating furnace

~ 25 -30%

Uniform temperature,pollution freecompared toconventional furnace,Auto controll, noisefree

Design as perrequirement

73, 335

175 Electrically heatednitriding furnace

~ 40 -50% Reduce use ofworking gas 50 - 100times, reducetreatment time by 3 -5

Design as perrequirement

191, 359

176 Mechanized mouldingmachines (with PLCcontrol)

~ 25 -70%

High static & highdynamic squeezeforce results in highquality moulds,uniform mouldsproperties, reducerejection, reducemould preparationcosts

ANSI B151 209

177 Automatic on-linesand controller

~ 60 -65%

Low running cost 269

178 Mechanical conveyorfor soda ash

~30% Reduce cycle time,productivityimprovement, reduce

43

26

Sl.No.

Eligible Equipment/Technology

EnergySavingPotential(%)

Benefits Specifications EquipmentSupplier

wastage

179 Oxy fuel fired glassmelting technology

~10-15% Increase production,improve glass quality

147

180 LPG fired beadmaking machine

~20% Better temperature,improve productquality

101

181 Horizontal flat andbent glass electricfurnace andtempering withautomatic controllerand recorders

~5-15% Improve production &product quality, easyin operation

ECE R43,ANSIZ97.1GB9963

126

182 Automatic SeatLasting Machine (HealSeat Lasting)

~10-15% Accurate & faster,require less space,require lessmanpower

DR AS/NZS2210.1

25, 60, 207

183 Automatic PoundingMachine

~50% Improves quality ofthe final products.

25, 207,360

184 Automatic Buffing &Roughing Machinewith MicroprocessorControl Mechanism

~20-30% Precision buffingoperation, fastproduction rate

BS 5131-4.1:1975

106, 112,207

185 Cement Dryer & FlashActivator Machine(Drying andReactivation)

~10-25% Increase productionrate, better dryingquality

112, 181,207

186 Mackey Sole Stitcher ~40% Fast production rate,better accuracy &product finish

162, 215,259

187 Fine Turning machine(for Last)

~20-35% Increaes productionrate

60, 112,337

188 Roughing Machine forPlastic Blocks

~10-15% Increaes productionrate

GOST27291:1987,PN EN930:2002,

112, 227

189 Hydralic AutomaticPress Moulding Press

~20-40% Optimumperformance, easy tooperate

ANSI B11.2-1982, JIS B6403

150, 241,247

27

Sl.No.

Eligible Equipment/Technology

EnergySavingPotential(%)

Benefits Specifications EquipmentSupplier

190 Automatic InjectionSoling MouldingMachine

~30-60% High Performance,durability and quality

BS EN201:1997

86, 323

191 Single/Double widthFleshing Machine

~10-20% Accurate productquality, highproductivity

129, 208,368

192 Single/Double widthUhairing Machine

~10-20% Accurate productquality, highproductivity

1 129, 131,208

28

193 Through Feed Doublewidth Machine(Shaving)

~30-50% Higher precisionproduct, improveleather grade

4, 1 49, 62, 310

194 Through Feed Doublewidth Machine(Setting)

~10-20% High productivity,produce betterleather quality

4, 1 62, 107,368

195 Double Width throughFeed SplittingMachine (Splitting)

~40% High precision, highproductivity, producebetter leather quality

4, 1 62, 81,310

196 Vacuum Dryer ~15-25% Uniform & betterdrying, shorter dryingtime

4, 1 62, 172,257

197 Hydraulic Press withAutomatic Time andTemperatureController

~20-40% Easy to operate &maintain, highproductivity

ANSIB11.2-1982, JISB 6403

4, 1 150, 241,247

198 Auto Spray with Dryer ~15-20% Uniform spraying &drying, patterncontrol, fineatomization, highproduction rate

4, 1 13, 290,257

Manufacturing of Electrical Equipment

199 Semi Automatic Press ~8-15% Variabledisplacement withhigh performance,high productivity

IS:4592,15318

47, 263,264, 300

200 Hi Speed PrecisionPower Press withComputerized Control

~15-20% High indexingaccuracy, less noise& vibration, highproductivity, requirelow maintainence

IS:4592,15318

47, 263,264, 300

201 Plasma CuttingInverter

~60% Light weight, morepowerful, longer life,higher reliability,quality cutting

1 34, 95, 240

202 Catalytic EnamellingMachine

~30% Improve productquality, require lessmanpower

185, 213,230

203 Extruder withTemperature Control,Pre-heating, SpeedControl

~30-40% Improve coating forbetter insulation

1 108, 273,283

Metals

29

204 High EfficiencyIndustrial Furnace inAluminum Factory

~30% Regenerative burnersystem,advanced softwarebased operator &managementautomatic system,reduce systemmaintenance

NFPA86C-1999,ISO/NP13577/13578/13579

23, 101,361

205 Electrical ResistanceHeat TreatmentFurnace

~30% Made with importedheating element andrefractory,Higherthermal insulationsceases heat loss

BS EN62395-1:2006

299, 366

206 Manganese SteelHeat TreatmentFurnace withRecupertor

~25-30% Less Heat Loss ASTM A703/A703M:1999

242, 4

207 Hi Chrome GrindingMedia Oil Fired HeatTreatment Furnacewith Recupertor

~10-30% High Durability,Ultimate performance

295

208 Wire Drawing (withVariable FrequencyDrive Control)

~10-30% Betterproductivity,Easyoperation and fasterthreading

IEC 228/BS6360.15RBD

18

209 Spooling Machines(with VariableFrequency DriveControl)

~10-30% EnhancedProductivity andenergy saving

41

210 Oxygen Plant(Manufacture ofOxygen and Nitrogenby Air separationMethod)

~20-35% Capable ofsimultaneouslyproducing oxygenand nitrogen, easyaccess formaintenance, betterlife

IEC 61511 166

Packaging

30

211 Automatic CorrugatedMaking Plant

~25-30% High productivity,better quality, lesserspace & manpowerrequirement, highreliability

1 8, 61, 289

212 Multi Colour FlexoPrinter Slotter forFlexographic Printing

~40% Faster drying, largesize printing

ASTM(ASME),DIN,JIS 2

1 200, 229,316

213 Automatic CorrugatedBoard Plant withPrinting Die Cutterusing Thermic Fluidfor Heating

~30-35% High productivity,better quality

8, 289, 314

214 Fully Automatic PLCHydraulicallyOperated MouldingMachine

~15-20% Higher productivity,better quality, simpleoperation

1 170, 246,256

215 Automatic Board Plant ~25-30% Less space &manpowerrequirement, higherproductivity

1 8, 61, 289

216 Case Maker & PrinterSlotter

~15-20% Instant drying, simpleto operate & maintain

1 8, 22, 229

217 High speed AutomaticBoard Line &Converting Line

~30-35% Less space &manpowerrequirement, higherproductivity

1 61, 143,289

Pharmaceuticals & Bulk Drugs

218 Nauta Mixers(Blenders)

~20% Grains do not break,no manual charging /discharging, shortermixing time, easyaddition of liquid &cleaning

UL 763,NSF/ETF/CE

1 204, 308

219 Semi AutomaticCapsule FillingMachine (with ACFrequency Drive)

~20-30% PLC controlled,loader disengagedautomatically,different speed to filldifferent type ofpowder / pellet, drughopper design reducetime to dismantle /unload powder, auto-drug hopper feed-inmechanism reduceweight variation &

CEcertified

28, 228

31

improve productivity

220 CO2 Flue GasRecovery Plant Basedon Flue Gas System

~30% Less corrosive effecton inner surface,carbon credits can beearned

111, 330,364

221 Flaker with Silo andScrew Conveyer (IceFlaker)

~5-10% Automatic operation,no spillage, no water,no latent heat loss

ASTMF2432 -04

1 71, 124,142

Plastics & Polymers

222 Multi LayerFilmExtruder

~25-30% Lower cost and shelfappeal

ISO/IEC10373-1:1998 (E)

1 253

223 PLC ControlledHydraulic Press

~5-10% Productivityimprovement,improve quality, easyto operate

ANSIB11.2

1 280

224 Pultrosen Machine ~10-20% IEC: 608l5 1 38, 319

225 MicroprocessorControlled FullyAutomatic Extrusion /Injection BlowMoulding Machine

~10-20% High productivity,imporve quality

ANSIB151.21

1 54, 109

Pulp & Paper

226 High EfficiencyTurbine Pump forWater Intake

~80-85% Flexibility ofoperation, low initialcost, minimalmaintenance cost

ANSIB58.1,CE, GS,EMC,CUL, DIN-24256,ISO-2858,IS - 5120,HIS, IS -1520

168, 193,302

227 High concentrationpulper

~23% Easy maceration, byslowly whirling andagitating it at a highconcentra- tion ofabout 15%,consumes same levelof power as a low-concentration pulper.

BS EN1034-5:2005

159, 372

228 Crown controlling roll ~39-71% Non-contactingpressuring part toreduced friction loss.

159

32

229 Adoption of AC drivingfor paper makingmachine and windersystem

~20-30% Energy Efficient 159

Rubber230 Cold Feed Extruder ~50% Rubber compound

warming operationprior to extrusion isavoided, requiredless space

ANSIB151.7-1982/88

1 48, 279,281

231 Multi ChannelExtruder

~15-20% Rubber bandmanufactured fromdry rubber

ANSIB151.7-1982/88

1 48, 125,266

232 Thermic Fluid Heaters ~10-15% Uniform heating,automatic controlsetting, operationalflexibility

DIN 4754 1 & 2 102, 333,336

233 Fully AutomaticVacuum HydraulicMachine (with PLCcontrol)

~30-40% EnhancedProductivity andefficiency

48

234 Rubber InjectionMoulding Machinewith ElectronicallyControlled HydraulicPump

~25-30% Accurate processcontrol and highproductivity

IS 13360,EN201:2009, GOST26689:1985

157

Steel re-rolling

235 Heating and PumpingUnits

~5-10% Improve combustionefficiency

101, 188

236 Semi Automatic HighSpeed Rolling Standswith DC Drives

~20-30% Eliminate voltage dip,reduce starting shockon motor / coupling /gear, improveprocess control,reduce motor heating/ stress

I.S.I./ISO9002, DINand Britishstandard

65, 88

237 Dry Type Starter forSlip Ring Motor

~4-5% ISO 3046 148

Textile

238 Yarn ConditioningMachine

~15-20% Non corrosivestainless steel usedfor construction,precise software withmulti- cycle processfacility, maintenance

21, 51

33

free trolley feedingunit, can run onelectricity, steam, oil

239 Automatic RotorSpinning Machinewith MRPS System

~20-25% Every spinningposition showsproduction rate,spinning componentsare directlyaccessible &replaceable withouttools

223

240 Open-widthContinuousScouring andBleaching Range withMicroprocessorControl

~15-20% Controlled clothtension, low chemicalconsumption

320, 328,329

241 Ring Frame Machine ~15-21% Higher productionrate

BS ISO96-2:2009,ICS59.120.10

33, 51

242 Speed FrameMachine

~10-15% Smooth start / stopoperation, betterprocess control

169, 307

243 Extruction LaminationLine with FrequencyControl Motors

~10-30% Smooth start / stopoperation, betterprocess control

222

34

244 Warp / RaschelKnitting Machine(Manufacturing ofKnitted Fabric)

~25-30% Inverters to controlspeed, operateconveniently

116

245 High SpeedComputerizedWarping Machine forKnitting

~15-25% Broken & lost endcan be memorised

254

246 Wet Fabric Spreadingand SqueezingMachine (Dyeing)

~20-30% Excellent squeezingand spreadingperformance,increase roller life

261

247 Roller Steamer /Polymeriser (Dyeing)

~10-20% Less maintenanceand operating cost

342

248 Washing Range withArrangement ofTension Free FabricDryingand Reduced WaterConsumption / WaterReuse System(Dyeing)

~5-10% Improvement inproduct quality

320, 328,329

249 Hydro Extractor(Dyeing)

~20% Very high speedresults in quick andmaximum hydroextraction, ACInverter drive for softstart / stop,dynamically balancedto high accuracy

305, 320

250 Tumble Dryer(Dyeing)

~15-20% Fully programmableelectronic control,cool down featureminimizes wrinkling &guarantees longerfabrics life, timercontrolled operation

BS EN61121:2005

243, 363

251 Multi ChamberStenter (min 4Chambers) withArrangement of Oil /Gas Heating(Finishing)

~10-20% Close circuit aircirculation chamber,wide internalchamber space foreasy cleaning, zig-zag arrangement ofmotors

309

252 Balloon PaddingMachine

~10-15% Compact in size, highdurability, motorscontrolled by A.C.

251, 320,363

35

invertors

253 Slit Opener withSqueeze Mangle

~40% Excellent Squeezingperformance,increase in roller life

29

254 PLC BasedCompacting Machine

~20-30% Sensitive load cells,variable frequencydrive, PLC control,lowest residualshrinkage values

BS EN500-4:2006

320

255 PLC BasedMercerizing Machine

~20-30% Saving of dyestuff insubsequentprocessing, increasepenetration of printingpaste, improveresponse to suedingor raising

328, 329

256 Fabric Reversing andSlit Opening Machine

~5-15% Smooth and fastworking

90, 320

257 Air Tight Hot AirStenter Machine(using AC InterverDrive)

~25-30% Electronic air flowcontrol, high efficientdrying zone, uniqueair flow system withindividual blower fortop / bottom jet box

137

258 Thermo Pac (HeatingSystem)

~10-25% Easy access to partsfor maintenance,easy to monitor

ASTMStandardB-499

334

259 High Speed / UltraHigh Speed KnittingMachines

~20-30% Higher productionrate, lessmaintenance,vibration absorbingsystem for machinelegs, invertercontroller motorsystem, trippingduring emergency

BS ISO10223:2005

353, 369

260 3 Thread FleeceMachines (PloyPlating)

~15-30% Higher productionrate, needle detector,inverter controlledmotor, anti- dustdevice, trippingduring emergency

369

36

261 Interlock KnittingMachines

~5-20% Higher productionrate, needle detector,inverter controlledmotor, anti- dustdevice, trippingduring emergency

D1894,ISO8295andTAPPIT549

369

262 High Speed SingleJersey KnittingMachines

~10-25% Higher productionrate, lessmaintenance, anti-dust device QualityWheel fear box, Highquality cam surfacefor improving sinkers& needle lifetime andtripping duringemergency

353, 369

263 Single JerseyMachines with OpenWidth Take UpSystem

~15-30% Higher productionrate, require lessmanpower, lessmaintenance, smoothfabric edge cutting,compressor notrequired, trippingduring emergency

231, 369

264 Single Jersey AutoStriper Machines

~10% Faster patternsetting, generousstitch-forming area,minimum strain onyarn, reliable stripingof even extremefabric

31, 369

265 Terry KnittingMachines

~15-30% Higher productionrate, Inverter motorcontrol, RS-485communicationinterface, lessmaintenance,Vibration Absorbingsystem for machinelegs, frame design towithstand at highspeeds, Anti-dustdevice and trippingduring emergency

ASTMA268

369, 373

266 Float Plating DenimMachine

~15-30% Higher productionrate, lessmaintenance, highquality cam surface,increase needle life,tripping during

369

37

emergency

267 Double Knit ElectronicJacquard Machine

~20-30% Latest generationelectronics

35

268 Woven Like CorduroyMachine

~5-15% Higher productionrate, lessmaintenance, trippingduring emergency

31, 369

269 High Speed CircularKnitting Machines

~20-25% Higher productionrate, lessmaintenance,vibration absorbingsystem for machinelegs, invertercontroller motorsystem, trippingduring emergency

BIS IS12385:1988 (R1998)

31, 369

270 High Speed FlexibleChip Shooter

~30-40% Sixth generationhigh- speed modularchip shooter,combined with thelaser centeringsystem gives moreaccurate components

165

271 Grey Heat Setting ~20-30% PLC, suitable forremoval of snarlingand curling effects,stabilise moisturelevel in dry yarn,variable frequencydrive systems

132, 163

272 Soft Flow / Jet FlowDyeing Machine (LowMLR of 1:5 or Lower)

~30-35% Variable frequencydrive for centrifugalpump in jet-dyeingmachine, energysaving by avoidingpressure loss acrosscontrol valve

ASME -50D

75

273 Squeezer with SlitOpener

~15-30% PLC, magneticstretcher, variablefrequency drive

76, 132

274 Balloon Padding ~10-25% Compact in size, highdurability

251, 320

38

275 Relax Dryer ~5-30% Optimum residualshrinkage with softer,fuller, bulkier handleof fabrics, shapestability

320

276 Specialty FabricFinisher such asBrushing, Sueding,Raising, andCompacting

~5-15% Creaseless drying 320

277 PLC Based PackageDyeing Machine

~10-15% PLC controlled,highly reliable

BS EN61496-1:2004

201

278 Automatic Hank /Yarn Dyeing Machine

~15-20% Variable conveyorspeed, low fibre loss,equipped withmoisture controller orautomatic control formoisture retentionprior to blending /spinning

ASMEB16.34,BS1414,API600,API6D

320

279 Direct-drive, HighSpeed, LockstitchMachine withAutomatic ThreadTrimmer

~10% Increase in feed,broadend sewingrange, preventsewing problem

165

280 Lockstitch Machinewith Automatic ThreadTrimmer

~5-10% Easy to operate, surethread trimmingmechanism

165

281 Semi-dry-head, HighSpeed, OverlockStitch Machine

~10-15% Eliminate oil stains onsewing product,cutting edge drytechnology to achievelubrication freemechanism

165

282 Computer- controlled,High Speed,LockstitchingButtonholing Machine

~25% 30 stitch patterns forbuttonhole

165

283 Computer-controlled,High-speed,Lockstitch, ButtonSewing Machine

~25% Different sewingpatterns, better seamquality, auto liftermechanism, oil stainsare eliminated,sewing starting pointcan be corrected

165

39

284 High-speed, Flatbed,Top & BottomCoverstitch Machine

~20-25% Stitch type as persewing items,simplifiedmaintenancemechanism

165

285 High-speed, Cylinder-bed, Top & BottomCoverstitch Machine

~20-25% Stitch type as persewing items,simplifiedmaintenancemechanism

165

286 Computer-controlled,High-speed,Bartacking Machine

~10-30% Faster speed, highproductivity, betterseam quality, widersewing area, differentsewing pattern

165

287 Servo-motor StitchingMachines

~63% Clutch-less operation,variable speed,Reverse Motorrotation Up to 4000RPM / High Torque400 watts,

362

289 Clutch Motor StitchingMachines with 3-phase Motor

~10% Accurate clutchoperation permitsinstant start / stop,vibration & noise isminimized

11, 365

290 Industrial Washing /Drying Machine /Tumble Dryers

~10-15% Programmableelectronic control,timer controlledoperation, cool downfeature to minimizewrinkle to guaranteelonger fabric life

IEC 61121 363

291 Draw Winder ~40-50% Inverter driven motordrive system offersstepless parametersetting in runningcondition

3

292 Air Draw TexturisingMachine

~40-50% Inverter driven motordrive system offersstepless parametersetting in runningcondition

3

293 Draw TexturisingMachine

~40-50% Inverter driven closedloop speed control forindividual drives

ICS59.120.10

3

40

294 Automatic ConeWinder

~15-20% Variable frequencydraive controlled,vacuum sensor &electronic circuit tooptimize suctionpressure

220, 346

295 Yarn Guided Machinewith PrecisionCrossing with InverterControl

~10-30% High winding,Electronic yarnssensor

294

296 Tape Winder (UsingFrequency Drive)

~10-30% Highest precision andflawless quality

183

297 Water Jet Looms ~50% High Speed, lowvibration, lowestpower consumptionper meter of fabricmanufactured

JWYC408-II

21

298 Air Jet Looms ~50% Lowest powerconsumption permeter of fabricmanufactured

CE / IEC61000 -4EMC

21

299 Rapier Looms ~50% Lower productioncost due to higherefficiency

IEC117884

21

Thermal - General

300 Condensate recovery& recycle system

~15-20% High Temperatureand good qualityFeed water, lowblowdown losses, lowwater treatment costs

IS 10496 :1983,ASMEBPVCSEC VIIIDIV I

245, 333,347

301 Cogeneration ~30-50% Waste heatutilization, lowerscarbon emissionsleading to carboncredits

TS B0022:2006, JIS B8124:2006, ASMEPTC 22

3 130, 333,339

302 Heat pumps ~30-50% Same systems usedfor cooling & heating,extract available heatfrom the outside air,simplicity in operationand maintenance

ANSI/ARI340-360-2004, ARI210/240

68, 333,338

303 Energy efficientrefrigeration system

~25% Less heat dissipation,increase inrefrigeration capacity,

Turboref.COP2.2up,

52, 114,286

41

low noise levels DIN EN378-2:2009,ASMEB31.5-2001,ANSI/ASHRAE 15-2007

304 Outdoor intakecontrol/variable airvolume/heatexchanger

~40-60% Efficient airdistribution inbuildings enablescontrol for betterindoor air quality, airsupply provdied onlocal thermal loadand occupancy

JIS B8628:2003,BSR/AHRIStandard1060-1997, 10CFR434.517,AS4254—2002,ASHRAEStandard62

164, 338,370

305 Dehumidification dryer ~30% Adsorbent is nontoxic / non flammable& fully waterwashable, minimumheat carry over

ANSI/AHAM DH-1-2008

14, 56

42

Annex I- How to use this Guide on EEEquipment/ Technology

Seven Headings specify the EE equipment/ technology that can be found in this list:

- Sl. No.: refers to an identification number which makes the measure easily identifiable.Serial number 1 to 100 refers to equipment which will clear (in most of the cases) theeligibility criteria of KfW EE LoC i.e. 3 tons of CO2 emission reduction/year/ lakh of amountinvested. Serial no. 101 onwards refers to equipment which are likely to clear the aboveeligibility criteria but the plant specific present conditions significantly influence thecalculation. In these cases the EE & CP Assessment tool developed by the consultants isused to evaluate the proposal. That is, Energy Efficiency Measures – List 1 (Sl. No. 1 to100) refers to equipment that will clear KfW EE LoC eligibility criteria whereas EnergyEfficiency Measures – List 2 (Sl. No. 101 onwards) refers to equipment which should gothrough assessment on EE&CP assessment tool.

- Eligible Equipment/Technology: specifies the respective measure

- Energy Saving Potential (%): The column presents the expected energy savings (inpercentage value), if any eligible equipment/ technology is installed and operated.

- Benefits: refers to the benefits of the measure, such as environmental, economic,logistical, or operational benefits

- Specifications: The broad specification of each equipment / technology and referencethereof, or standards applicable are provided

- Equipment Supplier: the code refers to suppliers of the respective technology orequipment that is needed to implement the measure. This equipment supplier list is onlyindicative and the consultants do not in any way promote or recommend the equipmentfrom these suppliers over those that are not mentioned herein. The list if for guidance ofthe users only .( Annex 2 )

The last section on Equipment Suppliers provides contact details of a few prominent suppliersof the respective technologies and equipment. Prospective MSME unit may like to use discretion

and select the supplier based on their insight and cluster related considerations.

43

Annex II List of Suppliers1 A K Enterprises

Products Conveyorised Powder Coating Curing Oven

Website http://www.ake.in/

Contact

Address 39 - 1 / 3, North Parade Road, St. Thomas Mount, Chennai - 600 016, India

Phone 91 - 9380537137

Fax 91 - 44 - 22315181

E-Mail ake46@sify.com, ake46@rediffmail.com

2 A. S. Precision Machines Pvt. Ltd.

Products Hot Shearing Automatic Forging Presses (Forge Shop); Reduce Rolling Machine (Forge Shop)

Website http://www.asrollingmachines.com/forged-rolls.html

Contact Mr. Ajit Singh / Charan Singh

Address Bhadla Road, Khanna Side, Mandi Gobindgarh - 147 301, Punjab (India)

Phone +(91)-9814092073/9814225847, +(91)-(1765)-256737/256075

Fax +(91)-(1765)-253448

E-Mail asprecision@rediffmail.com

3 Aalidhra Textile Engineers Ltd.

Products Draw Winder, Air Draw Texturising Machine, Draw Texturising Machine

Website http://www.aalidhra.com/asd_12.htm#

Contact

Address 2, Functional Estate, Road No.6, Udhyognagar, Udhna, Surat-394210 (Gujarat) India

Phone +91-261-2279520-30

Fax +91-261-2278789

E-Mail aalidhra@aalidhra.com, marketing@aalidhra.com

44

4 Aastha Tech

Products

Manganese Steel Heat Treatment Furnace with Recupertor

Website http://aasthatech.tradeindia.com/Exporters_Suppliers/Exporter19988.375634/Recuperator.html

Contact Mr. Rakesh Anand (Director)

Address No.1450, MIE, Part B, Bahadurgarh - 124507, Haryana, India

Phone 91-1276-267392/267277/ 91-11-23642358

Fax 91-11-23659850

E-Mail

5 ABB India

Products Variable frequency drives, Variable Frequency Drive for Water Circulating Pump, VariableFrequency Drive for Autocore Suction Motor, Exclusive transformer for lighting, Soft starter formotors, kWh indicator for induction furnace

Website http://www.abb.co.in/ProductGuide/

Contact Sanaj Natarajan

Address Corporate Office and Registered Office, 49 Race Course Road, Khanija Bhavan, 2nd floor,East Wing, Bangalore, 560001, Karnataka, India

Phone +91 80 22949150-54

Fax +91 80 229 49148

E-Mail sanaj.natarajan@in.abb.com

6 Abrasive Technology

Products Fine Grinding (CBN Surface Grinding Machine)

Website http://www.abtechindia.com

Contact

Address 123, Shivkrupa Industrial Estate, L.B.S. Marg, Vikhroli (West), Bombay - 400083. INDIA.

Phone 91-22-25779440

Fax 91-22-25779029

E-Mail mail@abtechindia.com

45

7 Accurate Engineering Industries

Products Cashew Processing (Boiler, Heat Exchanger with Complete Accessories, Packaging Machine, etc.)

Website http://www.indiamart.com/accurateengineering/

Contact Mr. Surinder Jhamb (CEO)

Address Plot No. 927-A, Industrial Area Phase-2, Chandigarh - 160 002, India

Phone +(91)-(172)-2652886/ 5019020, 9814710748

Fax +(91)-(172)-5086069

E-Mail accurateomni@yahoo.com

8 Acme Machinery Company

Products Automatic Corrugated Making Plant, Automatic Corrugated Board Plant with Printing Die Cutterusing Thermic Fluid for Heating, Automatic Board Plant, Case Maker & Printer Slotter

Website http://www.acmemachinery.net/

Contact

Address 1, Vaibhav Indl. Estate, near Telecom Factory, Sion - Trombay road, Deonar, Mumbai-88 India

Phone (91-22) 2551 8978, 2550 0333

Fax (91-22) 2550 0333

E-Mail info@acmemachinery.net

9 Acmefil Engineering Systems Pvt. Ltd.

Products High Efficiency Atomizers in Humidification Plant, Electromagnetic irradiation (Microwaveheating/Infrared heating)

Website http://www.acmefil.co.in/spraydryer.html

Contact Ravi Nair (Managing Director), Anil Bhat (Director)

Address Plot No. 535, Phase II, G.I.D.C., Vatva, Ahmedabad-382 445, India.

Phone 91 98250 61240

Fax +91-79-25890722, 25897872

E-Mail acmefileng@dataone.in

46

10 Active Engineering

Products Turning Machine with Variable Frequency Drive with Regenerative Braking System

Website http://www.activeengineering.in/cnc-turning-machines.htm

Contact Mr. Hiran Bhatt

Address 10, Samarat Industrial Area, Near S.t. Work Shop Gondol Road, Rajkot,Gujarat, India - 360004

Phone +91-9227606222 91 9427730718

Fax

E-Mail hbhatt@indiatimes.com

11 ADLEE Powertronic Co. Limited

Products Clutch Motor Stitching Machines with 3 phase Motor

Website http://www.adlee.com/industrial_sewing_machine_motors.htm

Contact

Address No.4, Lane 989, Chungshan Rd, Shenkang, Taichung 429 Taiwan.

Phone 886-4-25622651

Fax 886-4-25628289

E-Mail webmaster@adlee.com

12 Advance Heating Systems

Products Natural gas fired muffle furnace

Website http://www.advance-systems.info/products.htm

Contact Mr. Kamal Popli

Address D-1/23 Mayapuri Industrial Area (Back Side), Phase-II, Delhi, India 110064

Phone +911128113798

Fax +91-11-28112315

E-Mail advanceheat@yahoo.com

47

13 Advanced Drying Systems

Products Seven effect Free Flow Falling Film Evaporator, Auto Spray with Dryer

Website http://www.advanceddrying.com/spray-drying-plants.html

Contact Mr. C. R. Kamath

Address 5-B, Madhu Kunj, Vinod Baug, Upashana Lane, Off. Juhu Lane, Andheri West Mumbai,Maharashtra - 400 058, India

Phone +91-22-26202463, +91-9820000907

Fax +(91)-(22)-26202437

E-Mail kamathcr@yahoo.com, advanceddrying@gmail.com

14 Aerodry Plastics Automation Pvt. Ltd.

Products Dehumidification dryer

Website http://www.aerodry.com/productdetail.aspx?mpgid=4&catid=1&pid=14

Contact

Address F -52, Sector – XI, Noida – 201 301, India

Phone +91-120 4766777

Fax +91 120 4766766

E-Mail info@aerodry.com

15 Aerotherm Systems

Products High Efficiency Burners with Multifuel Capacity, Improved Oil Burners (Biscuit Plant)

Website http://www.aerothermsystems.com/Manufacturer-Exporter/Steam-Boiler/Thermic-Fluid-Heater/Tray-Dryer/Indirect-Air-Heater/Hot-Air-Generator/Furnace-Oven/Products.aspx

Contact

Address Plot No 1517, Phase III, GIDC, Vatwa, Ahmedabad - 382 445 INDIA

Phone +91 79 25890158 25895243

Fax +91 79 25834987

E-Mail contact@aerothermsystems.com

48

16 Agnee Engineering Fluidtherm Technology Pvt. Ltd.

Products Fluidized Bed Heat Treatment Line with Controlled Atmosphere & Recuperators (Heat Treatment)

Website http://www.fluidtherm.com/products/principle_fluid.htm

Contact

Address SP132, III Main Road, Ambattur Industrial Estate, Chennai 600 058, India

Phone +91-44 26357390

Fax +91 44 26257632

E-Mail info@fluidtherm.com

17 AIS Gold Plus Group

Products Heat absorbing glass /low emissivity glass (window panel)

Website http://www.goldplusgroup.com/heat-soaked-glass.htm

Contact

Address Gold Plus House G-192, Prashant Vihar, Delhi 110085, India

Phone 91-11-47000500, 27564007, 27565277, 27565947

Fax 91-11-47000555, 91-11-27866378

E-Mail info@goldplusgroup.com

18 Ajit Machine Tools Industries

Products Wire Drawing (with Variable Frequency Drive Control)

Website http://www.ajitmachines.com/wire_drawing.html

Contact Mr. Sukhvinder Singh

Address 2381,Sewak Pura, Street No.8, Back Side Dera Kalsian, LUDHIANA-141003 (Punjab), INDIA

Phone +91-98-15923379, +91-9815923379

Fax +91 161 4623379

E-Mail cncman@gmail.com

49

19 Akal Induction Pvt. Ltd.

Products Medium frequency end bar heater

Website http://www.akalinduction.com/product1.html

Contact

Address G.T.ROAD, Opp. GNBL College for Women, G.T. Road, PHAGWARA

Phone 91-9815221313, 9876000013

Fax 91-1824-503633, 261533

E-Mail akalind@gmail.com

20 Akash Pack Tech (P) Ltd.

Products Packing Machine Bag Maker & Weigher

Website http://www.akashpack.com/

Contact

Address 89, HSIDC Indl. Estate, Sector-59, Faridabad, Haryana - 121 004, (India)

Phone +91 129-4155000, 4155001,4297700

Fax +(91)-(129)-2307610

E-Mail mktgapl@akashpack.com, pratap.singh@akashpack.com, akashpack@gmail.com

21 Alidhra Weavetech Pvt. Ltd.

Products Water Jet Looms, Rapier Looms, Yarn Conditioning Machine, Air Jet Looms

Website http://alidhra.com/products.php

Contact

Address Plot No. 195, Rd 6-F New Estate, Udyognagar Udhna SURAT, GJ – 394210, INDIA.

Phone +91 261 2278674

Fax +91 261 2278438

E-Mail info@alidhraweavetech.com, sales@alidhraweavetech.com

50

22 Alliance Engineers

Products Case Maker & Printer Slotter

Website www.allianceengrs.com

Contact Mr. Manjit Singh

Address J-126B, Vishnu Garden, New Delhi, India

Phone +91-9810626661

Fax

E-Mail info@allianceengrs.com

51

23 Allied Consulting Engineers Pvt. Ltd.

Products High Efficiency Industrial Furnace in Aluminum Factory, High performance electrolytic furnace

Website www.alliedfurnaces.com

Contact

Address Allied House, Road no. 1, Opp. BMC office, Chembur, Mumbai-71

Phone +91-22-25284028

Fax

E-Mail allied@alliedfurnaces.com

24 Allied Furnaces Pvt Ltd.

Products Pusher Type Reheating Furnace with Suspended Roof,Multi Fuel Capacity and AutomatedTemperature Controls

Website www.alliedfurnaces.com

Contact

Address Allied house, Road No1, Chembur, Mumbai-400071

Phone

Fax

E-Mail

25 ALPE SPA

Products Automatic Seat Lasting Machine (Heal Seat Lasting), Automatic Pounding Machine

Website www.alpespa.it

Contact

Address Via Noventana No. 18835027, Noventa Padovana - Padova, Italy.

Phone +39-049-8934400

Fax

E-Mail info@alpespa.it

52

26 AMC SCHOU AS

Products Cylinder Block Boring and Milling Machine (with Variable Speed and Cycle Control)

Website http://www.amc-schou.dk/index.html

Contact

Address AMC-SCHOU AS, Røddikvej 82, DK-8464 Galten, Denmark

Phone +45 87545454

Fax +45 87545455

E-Mail

27 Amoto Engineers Pvt. Ltd.

Products High Efficiency Atomizers in Humidification Plant

Website http://www.amotoindia.com/

Contact

Address B-23, Nandkishore Industrial Estate, Off. Mahakali Caves Road, Andheri (East), Mumbai ¨C 400 093,(INDIA)

Phone +91 22 26871177/ 66926020

Fax +91-22-26870709

E-Mail info@amotoindia.com / amoto@vsnl.com

28 Anchor Mark Private Limited

Products Semi Automatic Capsule Filling Machine (with AC Frequency Drive)

Website http://www.anchormark.com/products_powder_filling.asp?c_id=3&pid=12

Contact

Address Plot No. 101 A, Kandivili Co-Op. Ind Estate Ltd, Charkop, Kandivili (West) Mumbai - 400067.

Phone +91-22-28682001

Fax +91-22-28682250

E-Mail sales@anchormark.com

53

29 ANDRITZ Küsters GmbH Eduard Küsters Straße

Products Slit Opener with Squeeze Mangle

Website http://www.andritz.com/ANONIDZB833661A51433568/ppp/ppp-processes.htm

Contact

Address 147805 Krefeld, Germany

Phone +49-2151-34-0

Fax +49-2151-34-1206

E-Mail kuesters@andritz.com

30 Ankur Scientific Energy Technologies Pvt. Ltd.

Products Use of Biomass Gasifier with Slurry Economizer (Incinerator), Biomass Gasifier Based Furnace(Namkeen Making)

Website http://www.ankurscientific.com/main.htm

Contact

Address Near Old Sama Jakat Naka, Sama Road, Baroda-390008, Gujarat, India

Phone 91-265-2793098/2794021

Fax 91-265-2794042

E-Mail ascent@ankurscientific.com, info@ankurscientific.com

31 Anusam Knitting Mills

Products Single Jersey Auto Striper Machines, Woven Like Corduroy Machine, High Speed Circular KnittingMachines

Website

Contact

Address

Phone

Fax

E-Mail

54

32 Anyang Forging Press Machinery Industry Co. Ltd.

Products Hydraulic Double Acting Hammer (Forge Shop)

Website http://www.chinesehammers.com/cpjs.html

Contact

Address Changjiang Road,High-tech Zone,Anyang City, Henan P.R. ,China

Phone +863725986768, +863725931234

Fax 0086-372-5922446

E-Mail anyang@chinesehammers.com, chinahammers@163.com, chinesehammer@163.com

33 Applied Automation Systems Private Limited

Products Ring Frame Machine

Website http://appliedautomation.in/Products/Product_Home.php

Contact RaviChandran Dhamodaran

Address SF NO 415 Thaneer Pandal Peelamedu, Coimbatore-641004 India

Phone +91 422 6541633

Fax 91 422 2512633

E-Mail info@Aaspl.net, www.Aaspl.net, www.Appliedautomation.in

34 Arc Tec Systems Ltd.

Products Plasma Cutting Inverter

Website http://www.arc-tec.in/

Contact

Address 501, Prathamesh Tower ‘A’ Wing, Senapati Bapat Marg, Lower Parel (W.), Mumbai-400013

Phone +91-22-24933300

Fax

E-Mail info@arc-tec.in

55

35 Aroma Tech

Products Double Knit Electronic Jacquard Machine

Website www.aromatech.in

Contact

Address Railway Feeder Road, Tirupur - 641 601. INDIA

Phone 91-421-2200626

Fax 91-421-2200436

E-Mail aroma@aromatech.in, aromatech666@dataone.in

36 Artisan Engineering Works

Products Dough Sheeter, Rotary Rack Oven, Deck Oven, Planetary Mixer

Website

Contact

Address Street No-52, Jafrabad, Seelampur, Delhi - 110053, India.

Phone 91-11-22566315/2026056

Fax 91-11-22566315

E-Mail

37 Asahi Group

Products Heat absorbing glass /low emissivity glass (window panel)

Website www.asahiindia.com

Contact Mr. Rakesh Awasthi

Address Global Business Park, Tower-B, 5th Floor, Mehrauli Gurgaon Road, Gurgaon, India.

Phone +91-9910999124

Fax

E-Mail rawasthi@aisglasses.com

56

38 Ashirwad Industries

Products Pultrosen Machine

Website www.ashirvadind.com

Contact

Address Plot No. 1907, Phase II, G.I.D.C Chhatral - 382729, Dist: Gandhinagar, Gujarat, India.

Phone

Fax

E-Mail

39 Asia Machines

Products Fine Grinding (CBN Surface Grinding Machine)

Website

Contact

Address 50, Baleshwar Upvan, Opposite Pokar Timber, Bopal-Ghuma Road, Ahmedabad - 380 058, Gujarat,India.

Phone +(91)-(281)-2466702, +(91)-9824289848 / 9687628899

Fax

E-Mail ragnesh@asiamachines.com

40 Associated Engineering Works

Products Thermal gasifier (biomass/coal as fuel)

Website www.aewgasifiers.com

Contact

Address Gaminini Compound main Road, Tanuku-534211-AP

Phone

Fax

E-Mail

57

41 Assomac Machines Ltd

Products Spooling Machines (with Variable Frequency Drive Control)

Website http://www.assomacmachines.com/

Contact

Address 26/2, South of GT Road, B.S. Industrial Area, Ghaziabad, 201009, Uttar Pradesh

Phone 120-2866505

Fax

E-Mail info@assomacmachines

42 Atlas Copco India Ltd.

Products Energy efficient air compressors/blowers

Website www.atlascopco.com

Contact Mr. Abhijeet Jain

Address Unitech Cyber Park - Ground Floor, Tower C, Sector-39, Gurgaon, India

Phone +91-9310955501

Fax

E-Mail abhijeet.jain@in.atlascopco.com

58

43 Auto mech handling pte ltd.

Products Mechanical conveyor for soda ash

Website

Contact

Address 21 Toh Guan Road East #09-15 Singapore 608609

Phone (+65) 68969258

Fax (+65) 68770200

E-Mail enquiry@automechamh.com

44 Bajwa Industries

Products Electronic Spring Coiling machines

Website

Contact Mr. Rajinder Singh (CEO)

Address No. 123, Street No. 6, Vishnu Garden New Delhi, Delhi - 110 018, India

Phone +(91)-(11)-25983225, +(91)-9811267278

Fax

E-Mail gurudansinghbajwa@yahoo.co.in

45 Balaji Engineers

Products Induction hardening equipment (100kW, 500 Hz to 3kHz)

Website

Contact

Address C-26, Shyamdarshan Society, Near Bapa Sitaram Chock, Nava Naroda, Ahmedabad - 382346,Gujarat, India.

Phone 91-79-22803428

Fax 91-79-22803428

E-Mail

59

46 Bel O Vac

Products Vacuum forming machine with thermostat control

Website

Contact

Address 143 W. Lincoln St., Ste 11, Banning, Ca 92220-4527, JB Direct

Phone 951-741-4822

Fax 951-922-1494

E-Mail jb@belovac.com

47 Bemco Hydraulics Limited

Products Semi Automatic Press, Hi Speed Precision Power Press with Computerized Control

Website www.bemcohydraulics.net

Contact

Address Udyambag, Belgaum, Karnataka- 590008, India

Phone +91-831- 4219000, 4219008

Fax

E-Mail marketing@bemcohydraulics.net, engineering@ bemcohydraulics.net

48 Bharaj Machineries Company Pvt. Ltd.

Products Cold Feed Extruder, Multi Channel Extruder, Fully Automatic Vacuum Hydraulic Machine (with PLCcontrol)

Website www.bharajmachineries.com

Contact

Address Plot No. 12 & 13, Survet No. 66, Hissa No. 1/1, Naik Pada, Village-Waliv, Taluka, Vasai (East), Dist-Thane-401208 Mumbai, Maharashtra, India

Phone (95250) 2452115, 2452116

Fax

E-Mail info@bharajmachineries.com

60

49 Bharath Engineering Works

Products Through Feed Double width Machine (Shaving)

Website www.bharathmachine.com

Contact Mr.R. Manoharan

Address 1/128,M.C.Road,Near Lord Murugan temple, Valayampet,Vaniy ambadi, Vellore district, Tamilnadu

Phone +91-4174-232 155

Fax

E-Mail info@bharathmachine.com

50 Bloom Combustion India Pvt. Ltd.

Products Regenerative burners for furnace

Website www.bloomeng.com

Contact Mr. Rahul Pathak

Address City Centre, Office No. 405 A, Karve Road, Erandwane, Pune, India.

Phone +91-9881001342

Fax

E-Mail rpathak@bloomeng.com

51 Blue Moon Engineering & Manufacturing Company

Products Yarn Conditioning Machine, Ring Frame Machine

Website http://www.bluemoonmachines.com

Contact Mr. Shabeer Kalavadwala

Address Rd. No. 6E, Udhna, Udhna Udyog Nagar Surat, Gujarat - 395 003, India

Phone +(91)-(261)-2278873/ 2279573, +(91)-9825120452

Fax +(91)-(261)-2274873

E-Mail bluemoonsrt@hotmail.com, smk@bluemoonmachines. com, sales@bluemoonmachines.com

61

52 Blue Star India.

Products Energy efficient refrigeration system

Website www. bluestarindia.com

Contact

Address Kasturi Building, Mohan T Advani Chowk, Jamshedji Tata Road, Mumbai, India

Phone +91-22-66654000

Fax

E-Mail coolingsolutions@bluestarindia.com

53 Bluetex Engineering

Products Automatic Ring Sizing and Loading Machine

Website

Contact Mr. Bharat S. Mistry (Manager)

Address B-29, Revabhi Industraial Estate, Near C. T. M. Cross Road, Amraiwadi Ahmedabad, Gujarat - 380026, India

Phone +(91)-(79)-25857085/ 25856176

Fax +(91)-(79)-25857085

E-Mail bharat_bluetex@indiatimes.com

54 Bombay Hydraulic (India)

Products Microprocessor Controlled Fully Automatic Extrusion / Injection Blow Moulding Machine

Website www.bombayhydraulic.com

Contact

Address Street No1, Near A.T.I, Gill Road, Ludhiana-141003, Punjab, India

Phone

Fax

E-Mail

62

55 Bosch Limited

Products Heavy Duty Injection Pump Test Bench (with Variable Frequency Drive)

Website http://www.boschindia.com/

Contact

Address Post Box No. 3000, Hosur Road, Bangalore - 560 030.

Phone +91 - 080 - 2299 9233

Fax

E-Mail

56 Bry air Matsui Technologies

Products Dehumidification dryer

Website www.bryair.com

Contact

Address 21 C, Sector 18, Gurgaon - 122015 India

Phone +91-0124-4091111

Fax

E-Mail enquire@pahwa.com

57 Bullion Flexipack Pvt Ltd

Products Shrink Sleeve Inserting Machine

Website www.bullionflexipack.com

Contact

Address 437, GIDC, Makarpura, Baroda-390 010, Gujarat.

Phone

Fax

E-Mail

63

58 C & D Paper Co. Ltd.

Products High Concentration Size Press

Website

Contact

Address 12F, Seaside Building Lujiang Road No. 52 Xiamen,Fujian China 361000

Phone (86 592) 2263408

Fax (86 592) 2114612

E-Mail machinery6@chinacnd.com

59 Carrier Airconditioning & Refrigeration Limited

Products BEE 5 Star rated air conditioner

Website www.carrierindia.com

Contact Ms. Himani Jashi

Address Delhi - Jaipur Highway, Narsingpur, Gurgaon, Haryana, India

Phone +91-9873388116

Fax

E-Mail himani.joshi@carrier.utc.com, bssindia@carrier.utc.com

60 CERIM S.p.a.

Products Automatic Seat Lasting Machine (Heal Seat Lasting), Fine Turning machine (for Last)

Website www.cerim.com

Contact

Address C.so Novara, 218 - 27029 Vigevano (PV) - ITALY

Phone +39 0381 20905

Fax

E-Mail info@cerim.com

64

61 Challenger International

Products Automatic Corrugated Making Plant, Automatic Board Plant, High speed Automatic Board Line &Converting Line

Website www.challengerpack.com

Contact Mr. Kuldeep Singh

Address 269 C, East Mohan Nagar, 100 Feet Road, Amritsar, Punjab, India

Phone +91-183-2581850, 2581186

Fax

E-Mail associat2003@ yahoo.com

62 Changzhou Sanding Machinery Co. Ltd.

Products Through Feed Double width Machine (Setting), Double Width through Feed Splitting Machine(Splitting), Through Feed Double width Machine (Shaving), Vacuum Dryer

Website http://www.tradekey.com/profile_view/uid/2829084/ Changzhou-Sanding-Machinery-Co-Ltd.htm

Contact Ms. Cookee Lee

Address 1, 2nd floor, Homgmei Technology Park, Changzhou - 2

Phone +86-519-83022055

Fax

E-Mail

63 Charika Industries

Products Mechanical Pneumatic Clutch Operated Crank Type Billet Shearing Press (Stock Cutting), FrictionDrop Hammer

Website www.charikaindustries.com

Contact Mr. Purish Singla

Address 495, Industrial Area - B, Ludhiana - 141003, Punjab, India

Phone +91-9417058656

Fax

E-Mail info@charikaindustries.com

65

64 Colt India Pvt. Ltd.

Products Heat insulating opening material

Website

Contact

Address 205 Amrapali Plaza, E-2, Amrapali Marg, Vaishali Nagar, Jaipur – 302021 Rajasthan, INDIA

Phone 91-141-3244191, 4028542, 09314509340

Fax 0091-141-2357974

E-Mail enquiry@coltindia.net

65 Crompton Greaves Limited

Products AC and DC Drives for Control of Fuel and Air, Semi Automatic High Speed Rolling Stands with DCDrives, Variable Frequency Drives for Circulation Air Fans in Vertical Dryer

Website www.cglonline.com

Contact

Address CG House, 6th Floor, Dr. Annie Besant Road, Worli, Mumbai - 400 030, INDIA

Phone

Fax

E-Mail

66 CS Aerotherm Pvt. Ltd.

Products Dough Sheeter, Deck Oven, Planetary Mixer, Prover, Rotary Rack Oven, Cookie Drop

Website

Contact

Address 103, Shresta B Homi 87, K. R. Road, Bangalore, Karnataka – 560004

Phone 080-6506066

Fax

E-Mail

66

67 Cummins India Ltd.

Products Natural Gas Fired Power Generating Set (Utility)

Website www.cumminspower.com

Contact Mr. Ajay Dusane

Address Power Generation Business Unit, 35A/ 1/ 2, Erandawana, Pune, India

Phone +91-9822192240

Fax

E-Mail ajay.a.dusane@cummins.com

68 Daikin Airconditioning India Pvt. Ltd.

Products Heat pumps, Heat reclaim ventilation/air conditioning system

Website www.daikinindia.com

Contact Mr. Sanjeev Gianchandani

Address 12th Floor, Building No. 9, Tower A, Cyber City, DLF Phase - III, Gurgaon, Haryana, India

Phone +91-124-4555444

Fax

E-Mail

69 Dalal Engineering Private Limited

Products Falling Film Evaporator (Re refining of Lubricating Oil), Wiped Film Evaporator (Re refining ofLubricating Oil)

Website

Contact

Address Village Kavesar, Thane-Ghodbunder Road, Thane, Maharashtra - 400 601, India

Phone +(91)-(22)-25976201 / 25976202

Fax

E-Mail

67

70 Damle Clay Structurals (P) Ltd.

Products Vertical Shaft Brick Kiln

Website www.damleclaystructurals.com/

Contact

Address ‘Anant’, Plot No. 98, Lane 5, Natraj Society,Karvenagar, Pune - 411 052

Phone

Fax

E-Mail

71 Darshini Engineers

Products Flaker with Silo and Screw Conveyer (Ice Flaker)

Website www.darshiniengineers.com

Contact

Address Plot No. 5227/A, Phase 4, G.I.D.C., Ahmedabad, Gujarat, India

Phone +91-79-65456412

Fax

E-Mail praghera@sify.com

72 Dawei Induction Heating Machine Co. Limited

Products Induction hardening equipment (100kW, 500 Hz to 3kHz)

Website

Contact

Address No153,Road Nortt ChongQing, QingDao,ShanDong, China

Phone +86-131-55965571

Fax +86-799-7232075

E-Mail inductionheating@gpgyjr.com.cn, admin@gpgyjr.com.cn, www.gpgyjr.com.cn/ www.induction-heating.com.cn

68

73 Deep Furnaces

Products Electrically heated die heating furnace

Website

Contact

Address Plot No. 33, HSIIDC, Sector-59, Faridabad-121 004, Haryana (INDIA).

Phone +91-129-4013558, 4016559

Fax +91-129-2307558

E-Mail deepfurnaces@gmail.com, info@deepfurnaces.com

74 Delair India Pvt. Ltd.

Products Air Dryer – Refrigerated Air Compressor Type

Website http://www.delairindia.com/

Contact

Address

Phone

Fax

E-Mail

75 Devrekha Whirler Centrifugals Pvt Ltd

Products Soft Flow / Jet Flow Dyeing Machine (Low MLR of 1:5 or Lower)

Website www.devrekha.com

Contact

Address A-2, 6/102, GIDC, Sachin-394230. (GUJ.)INDIA.

Phone +91-261-2398881/2398882, +91-9374508711

Fax +91-261-2398883

E-Mail info@devrekha.com

69

76 Dezhou Yaxing Textile Machinery Co., Ltd

Products Squeezer with Slit Opener

Website

Contact

Address China (Mainland)

Phone 13053410857

Fax 0086-0534-8943823

E-Mail

77 Dhanaprakash Industrial Corp.

Products Gas Fired High Temperature Furnace with Automatic Temperature Controller & Recorder (HeatTreatment), Natural Gas Based Oven

Website http://www.dhanaprakash.com/

Contact

Address Plot No L-34/2, MIDC, Kupwad, Sangli 416436, Maharashtra, India

Phone +91-233-2645701,03,04

Fax

E-Mail dhana@dhanaprakash.com

78 Dhiwren Hydraulics

Products Microprocessor Based Energy Controlled, Pneumatic Clutch Operated, Screw Friction Presses(Forge Shop)

Website www.dhiwrenhydraulics.tradeindia.com

Contact Mr. Satyajit Ghosh

Address Moynagarh, Ganipur, Maheshtala, Kolkata, India.

Phone +91-9830236622

Fax

E-Mail

70

79 Diligent Micro Controls

Products Liquid and Gaseous Fuel Ratio Controllers (Ratiotrols)

Website www.diligentmicrocontrols.com

Contact

Address Bhatia Compound No-2, Lal Bahadur Shastri Marg, Thane-400602

Phone

Fax

E-Mail

80 DISA India Ltd.

Products Core setter and automatic mold conveyor, Compact vertical moulding machine

Website

Contact

Address Regd. & Corporate Office, 5th Floor, Kushal Garden Arcade, 1A, Peenya Industrial Area, Peenya2nd Phase, Bangalore - 560 058

Phone 080 4020 1400 to 04

Fax 080 2839 1661

E-Mail bangalore@disagroup.com

81 DMT Hydraulics

Products Double Width through Feed Splitting Machine (Splitting)

Website www. dmtleathermachines.com

Contact Mr. Rajendar Singh

Address A-11, Export promotion Industrial , U.P.S.I.D.C. Shashtripuram, Agra, U. P

Phone +91-9897070440, +91-562-2510693

Fax

E-Mail rsingh@dmtleathersmachines.com

71

82 Doshi Technologies Pvt. Ltd.

Products Medium Frequency Induction Heaters (Heat Treatment), Highly sensitive and responsive arcfurnace, Microprocessor Based Electric Furnace

Website http://www.doshiassociates.net/

Contact

Address 863/6- G.I.D.C. Makarpura, Vadodara, Gujarat, India

Phone +91 265 263 4985

Fax

E-Mail doshi@doshiassociates.net

83 Dow Chemical Int’l Pvt. Ltd.

Products Air sealing support material, Forming plastic insulator

Website www.building.dow.com/ap/in/

Contact

Address Corporate Park, Unit No. 1, V. N. Purav Marg, Chembur, Mumbai, India

Phone +91-22-67978553, 25245830 (extn. 553)

Fax

E-Mail zansari@dow.com

84 Dresser Waukesha

Products Enginator based on natural gas

Website http://www.waukeshaengine.com/

Contact

Address 1101 West St. Paul Avenue, Waukesha, WI 53188-4999 U.S.A

Phone 262-547-3311

Fax

E-Mail

72

85 Dukhiram Maurya Engineers & Refractory Works (India) Pvt Ltd

Products Waste heat recovery from regenerative tank, Waste heat recovery from recuperative tank, Gas / OilFired Shuttle Kiln (Firing Section)

Website www.dukhiram-enggfurnace.com

Contact Mr. Rajnath Maurya

Address B-304, Universal Business Park, kamani Oil Mill Road, Chandivali, Andheri, Mumbai - 400 072, India

Phone +91-9820512934

Fax

E-Mail response@dukhiram- enggfurnace.com

86 Dyna Creation Pvt. Ltd.

Products Automatic Injection Soling Moulding Machine

Website http://www.yufong.com/

Contact

Address M-576, 1st Floor, Guru Harkishan Nagar, Paschim Vihar, New Delhi-110087

Phone +91-11-65496285

Fax

E-Mail dynacreation@airContact no.mail.in

87 Dynamech Engineers

Products Fryer Machine with Conveyor Belt & Bucket Elevator (Namkeen)

Website www.dynamechengineers.net

Contact

Address 214, Palsikar Colony, Indore, Madhya Pradesh-452 004, India

Phone

Fax

E-Mail

73

88 Dynaspede Integrated Systems (P) Limited

Products Variable Frequency Drives for Circulation Air Fans in Vertical Dryer, AC and DC Drives for Control ofFuel and Air, Semi Automatic High Speed Rolling Stands with DC Drives

Website www.dynaspede.com

Contact

Address 508 Pragathi Tower 26, Rajendra Place, New Delhi-110 008

Phone

Fax

E-Mail

89 East Coast Magnets Pvt. Ltd.

Products Electro Permanent Magnetic Plate Handling System, Electro Permanent Magnetic TelescopicSpreader Beam, Electro Permanent Magnetic Tilting Plate Handling, Electro Permanent MagneticBillet Handling Machine, Modular Electro Permanent Magnets, Battery Operated Electro PermanentMagnetic Lifter, Heavy Duty EPM Systems for Rail Machining, EPM Modules for Fast MouldClamping, Electro Permanent Magnetic Chucks (MAGNASLOT)

Website http://sardamagnets.com/

Contact

Address 44/1/6, IDA Phase I, Jeedimetla, Hyderabad, Andhra Pradesh - 500 055.

Phone +91 (0) 40 2309 8262

Fax

E-Mail info@sardamagnets.com

90 Eastman Exports

Products Fabric Reversing and Slit Opening Machine

Website http://www.eastmanexports.com

Contact

Address 5/591, Sri Lakshmi Nagar, Pitchampalayam Pudur, Tirupur 641 603, INDIA

Phone +91-421-4301234

Fax +91-421-4301205

E-Mail eman@vsnl.com

74

91 Eclipse Combustion Pvt. Ltd.

Products Regenerative burners for furnace

Website www.eclipsenet.com, www.eclipseindia.com

Contact Mr. V.R. Kulkarni

Address Plot No. 3/B, D-1 Block, Chinchwad Indl. Area, Chinchwad, Pune, Maharashtra- 411019. India

Phone +91-9371233523

Fax

E-Mail vkulkarni@eclipsenet.com

92 Economode Food Equipment Pvt Ltd

Products Palates Kukure Line Machine with Packing Unit, Namkeen Mixing Machine, Fryer Machine withConveyor Belt & Bucket Elevator (Namkeen)

Website www.economode.in

Contact

Address B-6, 5 Acre, Kothari compound, Tikuji- Ni- Wadi Road, Manpada, Thane -400 607, Maharastra.

Phone

Fax

E-Mail

93 Eddymelt Electrotherm (India) Ltd.

Products Medium Frequency Induction Heaters (Heat Treatment)

Website www.eddymelt.com

Contact Mr. Anand Ganu

Address C-87 M.I.D.C. Hingna Industrial Estate, Nagpur, Maharashtra – 440025

Phone +91-9226595148

Fax

E-Mail eddymelt@yahoo.co.in

75

94 Electricoil Super Thermal Engineers

Products Electromagnetic irradiation (Microwave heating/Infrared heating)

Website www.electroil.com

Contact

Address 151, Small Factory Area, Bhandara Road, Nagpur – 440008

Phone +91-712-2767998

Fax

E-Mail electroilngp@gmail.com

95 Electro Plasma Equipments Pvt. Ltd

Products Plasma Cutting Inverter

Website http://www.airplasma.com

Contact

Address 104 Acme Industrial Park, I. B. PaContact no. Rd, Goregaon (E), Mumbai - 63, India.

Phone +91-22-40203456

Fax

E-Mail sales@airplasma.com

96 Electroil Meta Therm Furnaces Pvt Ltd

Products Gas fired Aluminium melting furnace

Website

Contact

Address

Phone

Fax

E-Mail

76

97 Electrotherm (India) Ltd.

Products Induction ladle refining furnace, Automatic temperature controller, High frequency melting furnace,Highly sensitive and responsive arc furnace, High performance electrolytic furnace, MicroprocessorBased Electric Furnace

Website

Contact Mr. Suneel Kulkarni

Address Palodia, Via Thaltej, Ahmedabad -382115, Gujarat, India.

Phone +91-9909963280

Fax

E-Mail mkt@electrotherm.com

98 Elite Thermal Engineers Pvt Ltd.

Products Fludised Bed Combustion Boiler (replacing Stoker Boiler)

Website www.elitethermal.net

Contact Mr. Amol Atre

Address Hall No. 2, ‘’C’’ Wing, Shree Balwant Niwas, 1846/47, Sadashiv Peth, Pune, India.

Phone +91-9225534088

Fax

E-Mail elitethermal@vsnl.net, amolatre@etepl.com

99 Encon (India)

Products Energy efficiency fans/pumps

Website www.encongroups.com

Contact

Address 2B/06 Shivkripa, N.C. Kelkar Road, Dadar(West), Mumbai 400028

Phone 91-22-24306578

Fax

E-Mail enconindia@vsnl.com

77

100 Encon Furnaces (P) Ltd.

Products Pusher Type Reheating Furnace with Suspended Roof,Multi Fuel Capacity and AutomatedTemperature Controls

Website www. enconindia.com

Contact

Address 14/6, Mathura Road, Fridabad-121003, Haryana, INDIA.

Phone

Fax

E-Mail

101 Encon Thermal Engineering Pvt Ltd

Products LPG fired bead making machine, Thermal insulation for hot & cold systems, Waste heat recoveryfrom regenerative tank, Waste heat recovery from recuperative tank, Gas / Oil Fired Shuttle Kiln(Firing Section), High Efficiency Industrial Furnace in Aluminum Factory, Natural Gas Based Oven,Gas Fired High Temperature Furnace with Automatic Temperature Controller & Recorder (HeatTreatment), Recuperators, Automatic combustion control for boilers/ furnaces, Heating and PumpingUnits, Gasifier Based Heat Treatment Furnace

Website www.encon.co.in

Contact Mr. Puneet Mahendra

Address 297, Sector-21B, Faridabad-121 001, Haryana, India.

Phone +91-9971499079

Fax

E-Mail pm@encon.co.in

102 Energy Machine

Products Thermic Fluid Heaters

Website http://www.hispeedenergy.com/prod-em-thermic-fluid-heaters.html

Contact

Address C1/B 444 4th Phase, G.I.D.C. V.U.Nagar- 388 121, Gujarat (India)

Phone 91(2692) 236210

Fax 91(2692) 237168

E-Mail sales@hispeedenergy.com, response@thermicfluidheater.com

78

103 Energy Process Equipments

Products Fluidized Bed Combustion Boiler (replacing Stoker Boiler)

Website http://www.energy-boilers.com/homepage.htm

Contact

Address Plot 29, GIDC N.H.No. 8, POR - Ramangamdi Ta. Dist Vadodara - 391243

Phone +91- 0265 - 830375 , 831079

Fax +91-0265-830975

E-Mail info@energy-boilers.com, energyboiler@satyam.net.in

104 Europack Machines (I) Pvt. Ltd.

Products Vacuum Holding for Non Ferrous Components for High Speed Milling

Website http://europack.in/products.html

Contact Mr. Rajesh Potdar

Address 14, Bindal Estate, Sakinaka, Mumbai - 400 072, Maharashtra, India

Phone +(91)-(22)-28526477 / 28502151, +(91)-9323249260 (M)

Fax +(91)-(22)-66942977

E-Mail europack1@gmail.com, europack@vsnl.com, europack1@sify.com

105 Excel Airtechnics (P) Ltd.

Products Modern Industrial Humidification System (for Controlling Relative Humidity & Temperature)

Website http://www.excelair.co.in/centralhumidificationplant.html

Contact Mr. M.Janakiraman ( Director), Mr. V.Nammalwar (Director)

Address Excel Airtechnics (P) Ltd,B-10, Nethrambigai Apartments. # 15, Vembuliamman Koil Street, K.K.Nagar West Chennai -600078, Tamilnadu, INDIA

Phone +(91)-(44)-23640757, 23640408 91 + 9444040757 (Hand Phone of Mr. Janakiraman)91+9444020598 (Hand Phone of Mr. Nammalwar)

Fax

E-Mail excelairtechnics@vsnl.net

79

106 Excel Machines India

Products Automatic Buffing & Roughing Machine with Microprocessor Control Mechanism

Website http://www.excelmachineindia.com/centerless-buffing-machines.html

Contact

Address H-60, M.I.D.C., Waluj, Aurangabad - 431136. Maharashtra, India

Phone +91-240-2553187, 6450745, +91-093252 12290 (M)

Fax +91-240-6622851

E-Mail info@xlr.co.in, response@excelmachineindia.com

107 FangHua Leather Machine Co. Ltd.

Products Through Feed Double width Machine (Setting)

Website http://www.51orders.com/fanghua/Products__1.html, www.leather-machinery.com

Contact Lin FangShu

Address Bailian Industrial Park, Anyang, Ruian City, Zhejiang Province, China

Phone 86-577-65098618 86-013906870668 (M)

Fax 86-577-65091618

E-Mail fanghuachina@gmail.com

108 Fantasy Machine Ltd.

Products Extruder with Temperature Control, Pre heating, Speed Control

Website www.fantasy.net.in

Contact Mr. R K Mohanani

Address No. 9, Pradhan Market, Chandra Vihar, Nilothi Ext. New Delhi-110041.

Phone +91-9811011157

Fax

E-Mail fantasyltd@gmail.com

80

109 Ferromatik Milacron

Products Microprocessor Controlled Fully Automatic Extrusion / Injection Blow Moulding Machine

Website http://www.milacronindia.com/index.php?option=com_content&view=section&id=22&Itemid=123

Contact

Address 92, Phase-I, G.I.D.C., Vatva, Ahmedabad - 382 445, India.

Phone +91-79-25830063 / 25890133 / 25890081

Fax +91-79-25830125, +91 - 79 - 25898998

E-Mail salesfmi@milacron.com

110 Flowmech Engineers (P) Ltd.

Products Semi Automatic Pillar Type Hydraulic Hot Moulding Press (with PLC Control)

Website http://www.hydraulicpressnet.com/hydraulic-hot-moulding-press.html

Contact Mr. A. K. Mittal

Address Flowmech Engineers Private Ltd.,No. C-196/2, IInd Floor, Mayapuri Industrial Area, Phase-IINew Delhi - 110 064, Delhi (INDIA)

Phone +(91)-9310004368(M) +(91)-(11)-28116456/28116457

Fax +(91)-(11)-41848415/25191255/28341524

E-Mail flowmech@airtelmail.in, flowmech@vsnl.com, flowmech@eth.net

111 Fluor Daniel India Pvt. Ltd.

Products CO2 Flue Gas Recovery Plant Based on Flue Gas System

Website http://www.fluor.com/india/services/pages/default.aspx

Contact

Address Fluor Daniel India Pvt. Ltd.10th Floor, Building 10, Tower C, DLF Cyber City, Phase II, Gurgaon - 122 002, Haryana, India

Phone +91.124.457.0700

Fax +91.124.426.3269

E-Mail

81

112 Focus Machines India Pvt Ltd

Products Automatic Buffing & Roughing Machine with Microprocessor Control Mechanism, Roughing Machinefor Plastic Blocks, Cement Dryer & Flash Activator Machine (Drying and Reactivation), Fine Turningmachine (for Last)

Website www.omacindia.com

Contact

Address C-32, Sector-10, Noida-201 301, Gautam Budh Nagar (U.P.) INDIA

Phone +91-120-2532101

Fax

E-Mail info@omacindia.com

113 Foundmatic Engineers

Products Online shot blasting machine (for cleaning the returns)

Website

Contact

Address St. Thomas Street, Santhosh Nagar, Kandhanchavadi, Chennai - 600 096, Tamil Nadu, India

Phone +(91)-(44)-24961683 / 24961683 / 65492916 / 24960950

Fax

E-Mail

114 Frick India Ltd.

Products Energy efficient refrigeration system

Website

Contact

Address 809, Surya Kiran, 19 K. G. Marg, New Delhi 110 001

Phone 011-23322381/384/391, 23738693/694

Fax 011-23322396

E-Mail delhi@frick.co.in

82

115 FUJI Electric

Products Variable frequency drives, Automatic temperature controller, Automatic combustion control forboilers/ furnaces

Website www.fujielectric.co.in

Contact

Address 509-510, Meadows, Sahar Plaza, JB Nagar Andheri Kurla Road, Andheri East, Mumbai: 400 059

Phone 022-4252 4850/ + 91 99103 22011 / +91 99675 42795

Fax

E-Mail pinal-mehta@fein.fujielectric.com, info@fein.fujielectric.com

116 Fung Chang Industrial Co.

Products Warp / Raschel Knitting Machine (Manufacturing of Knitted Fabric)

Website http://www.fungchang.com

Contact

Address No. 9, Shih Chi Tzu, Kaoping Village, Lungtan Hsiang Taoyuan Hsien, 325 Taiwan, R.O.C

Phone 886-3-4717824 / 4717825 / 4717453

Fax 886-3-4717702 / 4580170

E-Mail

117 G. S. Machineries

Products Automatic cold box core shooter

Website

Contact

Address No.6, Thiruveeka Nagar, Jothipuram, Coimbatore - 641047, Tamil Nadu, India

Phone 91-422-6583752

Fax 91-422-4274584

E-Mail

83

118 Galaxy Machines

Products Automatic cold box core shooter

Website response@galaxymachine.com

Contact

Address Gat No.1567, Shelar Vasti, Behind Agarwal Industrial Estate, Chikhali, Pune - 412114, Maharashtra,India

Phone +91-20-32510600 09823834421, 09823364421(M)

Fax

E-Mail galaxymachi@yahoo.co.in

119 Gallant Equipment Pvt. Ltd.

Products Automatic Electrostatic Powder Coating Machine

Website

Contact

Address 104M, Karunamoyee Ghat Road, Micheal Madhusudan Park, Kolkata-700082, West Bengal, India

Phone + 91– 33– 24029656 / 9657

Fax

E-Mail gallant@powdercoatindia.com

120 Gayatri Control And Automation Private Limited

Products Variable Frequency Drive for Oil Pimp in Hydraulic Power Pacs

Website www.gayatrielectrotech.tradeindia.com

Contact Mr. Deepak Deshpande

Address 2791 1/2, Varuntirth Ves, Shivaji Peth, Kolhapur, Maharashtra, India

Phone +91-9422406549, 9527003272

Fax

E-Mail

84

121 Gayatri Electrotech Co. Pvt. Ltd.

Products Electronic ballast

Website

Contact Nr. Nagarwel Hanuman

Address 13-14, Milan Estate, Opposite Kwality Ice Cream, Nr. Nagarwel Hanuman, Amraiwadi Ahmedabad -380 026,

Phone +(91)-(79)-22741897

Fax

E-Mail inquiry@papadmachinery.com

122 GBM Industries

Products Temperature Control Drying Oven

Website http://www.gbmindustries.com/

Contact Mr. Manish Verma

Address RZ-B-27, Dabri Extn. East New Delhi - Delhi, India.

Phone +91-9810773597

Fax

E-Mail mverma@gbmindustries.com

123 GE Consumer & Industrial India

Products T5 fluorescent tube lights with electronic ballast

Website www.gelighting.com

Contact Mr. SN Sharma

Address The Millenia, Level 6, Tower B, 1 & 2, Murphy Road, Ulsoor, Bangalore, India.

Phone +91-80-41434000

Fax

E-Mail query@ge.com

85

124 GEA Refrigeration India

Products Flaker with Silo and Screw Conveyer (Ice Flaker)

Website www.gearefrigeration.com

Contact Mr. Rohit Arora

Address Pune, India

Phone

Fax

E-Mail rohit.arora@geagroup

125 Genca Inc.

Products Multi Channel Extruder

Website www.genca.com

Contact Ms. Ellie Andrade

Address 9600 18th St. North, St.Petersburg, FL 33716, USA.

Phone 1-727-489-1164

Fax

E-Mail eandrade@genca.com

126 Glass & Glazing technologies (India) Pvt Ltd.

Products Horizontal flat and bent glass electric furnace and tempering with automatic controller and recorders

Website www.glassprocess.com

Contact

Address 302, Raheja Plaza, Off Andheri Link Road, Andheri (W), Mumbai - 400 053.

Phone

Fax

E-Mail

86

127 Global K Associates

Products Packing Machine Bag Maker & Weigher

Website www.gkpackagingmachines.com

Contact

Address Plot A-100/2, D.P.S Society, Flat # B-503, Noida, Uttar Pradesh

Phone

Fax

E-Mail

128 Goodlife Technologies Pvt. Ltd

Products Cookie Drop

Website

Contact

Address A-20, Sector-58, Noida – 201301 Uttar Pradesh, India

Phone 91-120-2490141

Fax

E-Mail

129 Gopi Engineering Works

Products Single/Double width Fleshing Machine, Single/Double width Unhairing Machine

Website www.gopiengineeringworks.com

Contact Mr. J.Ganesh Moorth

Address 2/72, M.C. Road, Madanur, Vellore District. Tamilnadu, Pin-635 804, India

Phone + 919443256280

Fax

E-Mail sales@gopiengineeringworks.com

87

130 Green Power International Pvt. Ltd.

Products Natural Gas Fired Power Generating Set (Utility), Cogeneration

Website www.greenpowerintl.com

Contact Mr. Sanjeev Puri

Address E-12/A, Sector - 63, Noida, India.

Phone +91-9818313779

Fax

E-Mail sanjeev.puri@greenpowerintl.com

131 Guleryuz Tannery Machinery Ltd.

Products Single/Double width Uhairing Machine

Website www.guleryuzmakina.com

Contact Mr. Ali Guleryuz

Address Bergama cad. Camii Kebir Mah. Uluyol Mevkii Menemen-Izmir, Turkey

Phone +90-232-8329462

Fax

E-Mail

132 Guruson International

Products Squeezer with Slit Opener, Grey Heat Setting

Website

Contact

Address 2512/10 (9B/3), Industrial Area-A Extension, Backside R.K. Machine Tools, Ludhiana - 141003,Punjab, India.

Phone 91-161-5056246/5015297

Fax

E-Mail

88

133 Haian Baixie Forging Hammer Co. Ltd.

Products Hydraulic Double Acting Hammer (Forge Shop)

Website www.forging-hammer.com

Contact

Address No.6 Yangmanhe Industrial Park, Haian, Jiangsu province, China.

Phone +86-513-88838848

Fax

E-Mail zcl@baixie.com

134 Haier Appliances India Pvt. Limited

Products BEE 5 Star rated refrigerators

Website www.haierindia.com

Contact

Address B-1/A-14, Mohan Co-operative Industrial Estate, Mathura Road, New Delhi, India.

Phone +91-11-66214000, 5000

Fax

E-Mail info@haierindia.com

135 Hangzhou 3King Air Conditioning Equipment Co., Ltd.

Products Improved Oven with Heat Recovery Equipment (Puffed Rice)

Website

Contact

Address West No.10,North Hongda Road, Qiaonan Block, Economic and Technological Development ZoneHangzhou, Zhejiang China (Mainland) - 311231

Phone 86-571-82696998 86-13735466566(M)

Fax 86-571-82697595

E-Mail

89

136 Hari Machines Limited

Products Microprocessor Based Energy Controlled, Pneumatic Clutch Operated, Screw Friction Presses(Forge Shop)

Website www.harimachines.com

Contact Mr. Nirmal Sanyal

Address Sugam Business Park, 7th Floor, J-6 Block EP & GP, Sector-5, Salt Lake City, Kolkata, India

Phone +91-33-30925000 to 5004

Fax

E-Mail hml@harimachines.in, hmlkol@harimachines.in

137 Harish Tex Mach Pvt. Ltd.

Products Air Tight Hot Air Stenter Machine (using AC Interver Drive)

Website http://www.harishworld.com/

Contact

Address Plot No. 65, Vishwa Gulab, 1st Floor, N. S. Road No.1, Juhu Scheme, Vile Parle (W), Mumbai –400056

Phone +91-22-2612 4180

Fax

E-Mail sales@harishworld.com

138 Havells India Ltd.

Products Compact fluorescent lamps, Metal halide lamps, High/Low pressure sodium vapor lamps, Lightemitting diode

Website www.havells.com/

Contact Mr Sunil Sikka

Address E-1 ,Sector 59 ,Noida -201307 UP India

Phone +91-0120-2477777

Fax

E-Mail sunilsikka@havells.com

90

139 HCS Enterproses

Products Oil Fired Rotary Rack Oven

Website

Contact

Address

Phone

Fax

E-Mail

140 Heatech Engineers

Products Biomass Gasifier Based Hot Water Generator

Website

Contact

Address 33/3 C, Ganesh Layout, Nallampalayam, Ganapathy Post Coimbatore - 641 006, Tamil Nadu

Phone +(91)-(422)-6576521 +(91)-9791713389(M)

Fax

E-Mail ceo@heatecheng.com

141 Henglongji vacuum forming machine corporation

Products Vacuum forming machine with thermostat control

Website

Contact

Address

Phone

Fax

E-Mail

91

142 Hi Tech Cooling Systems

Products Flaker with Silo and Screw Conveyer (Ice Flaker)

Website www.hitechcooling.com

Contact Mr. Pravin Pa

Address 4510,GIDC, Ankleshwar, Gujarat, India.

Phone +91-9428324770

Fax

E-Mail info@hitechcooling.com

143 HIC Print Pack Machine

Products High speed Automatic Board Line & Converting Line

Website http://www.printingpackingmachinery.com/

Contact Mr. Khushvinder Singh

Address 6-7, Gokal Ka Bagh, 100 Feet Road Amritsar - 143 001, Punjab, India.

Phone +91-9417205595 / +91-9780258148

Fax

E-Mail harjindra@glide.net.in

144 Himalyan Equipment Manufacturing Co.

Products Spiral Mixer

Website www.hemco.in

Contact

Address Plot No G-5, UPSIDC Industrial area, Sarojni Nagar, Lucknow, Uttar Pradesh.

Phone

Fax

E-Mail

92

145 Hitachi Industrial Equipment Systems Co. Ltd.

Products Energy efficient air compressors/blowers

Website www.hitachi.co.in

Contact Mr. Piyush

Address 3rd Floor, ABW Elegance Tower, Jasola District Centre, New Delhi 110 025, India.

Phone +91-11-4060 5252

Fax

E-Mail singh@hitachi.co.in

146 HOLZHER

Products Edge bander sprint with power PC control

Website http://www.holzher.com/

Contact

Address 5120 Westinghouse Blvd, Charlotte, NC 28273, USA

Phone (704) 587-3400

Fax

E-Mail sales@holzher.com

147 Honeywell Automation India Ltd.

Products Oxy fuel fired glass melting technology, Heat reclaim ventilation/air conditioning system

Website www.Honeywellautomationindia.com

Contact

Address 56 & 57, Hadapsar Industrial Estate, Hadaspar, Pune.

Phone 020-662039400

Fax

E-Mail

93

148 Hua Sheng Long Electrical Equipment Co., Ltd

Products Dry Type Starter for Slip Ring Motor

Website

Contact Mr. Ada Zhang

Address (Exporter, Manufacturer) #3 Helanshan Road, The Middle Path of Huanghe Street,Qinhuangdao,China (CN)

Phone +86 0335 – 5301093

Fax +86 0335 – 8515333

E-Mail

149 Huakeyi

Products Automatic controllers & recorders for furnace temperature /On line oxygen analyzer

Website

Contact

Address

Phone

Fax

E-Mail

150 Hydromech Automation Pvt. Ltd.

Products Hydraulic Automatic Press Molding Press, Hydraulic Press with Automatic Time and TemperatureController

Website http://www.hydraulics-india.com/index.html

Contact Mr. D. S.Tanwar

Address WZ-3158/A, Mahindra Park, Rani Bagh, New Delhi - 110 034, India

Phone +(91)-(11)-27014283

Fax +(91)-(11)-27034552

E-Mail hydroautomation@indiatimes.com

94

151 Indaid Engineers Pvt. Ltd.

Products Recuperators

Website www.indaid.com

Contact Mr. K. Kalyan Sundaram

Address C22 to 24, Industrial Plots,Mugappair West,Chennai - 600 058 Tamilnadu.

Phone +91-044-26243396

Fax

E-Mail info@indaid.com

152 Inductotherm (India) Pvt. Ltd.

Products High frequency melting furnace, Medium frequency induction furnace (replacing cupola), Automaticpouring system

Website www.inductothermindia.com

Contact

Address Shri Kishorebhai D. Vyas Building, Bopal, Ahmedabad 380 058 Gujarat, India

Phone +91-2717-231961

Fax

E-Mail iil@inductothermindia.com

153 Infinite Energy Pvt. Ltd.

Products Use of Biomass Gasifier with Slurry Economizer (Incinerator)

Website www.infiniteenergyindia.com

Contact

Address 1 floor,”Baba house”, 149 A, kilokri, Opp. Maharani Bagh, New Delhi 110014.

Phone +91-9212084933

Fax

E-Mail infenergy@gmail.com

95

154 Innovative Technologies

Products Duplex Roller Polishing Machine

Website www.innovativetechnologies.co.in

Contact Mr. Arvind Motka

Address 50 / A, Shankar Estate, Revabhai Estate Road, C.T.M. Amraiwadi, Ahmedabad - 26, INDIA

Phone +91-98253 98702

Fax +91- 79- 2586 0943

E-Mail info@innovativetechnologies.co.in

155 Intelux Electronics Pvt. Ltd.

Products Electronic ballast

Website

Contact

Address

Phone

Fax

E-Mail

156 J K Foundry Engineers

Products Intensive mixers (Molding/Core)

Website

Contact

Address 62, Shreyas Park, B/h. ISRO, Jodhpur Tekra, Ahmedabad - 380 054, Gujarat, India.

Phone +91 - 79- 26925154

Fax

E-Mail info@jkfoundryequipments.com

96

157 J. R. D. Rubber and Plastic Technology Private Limited

Products Rubber Injection Moulding Machine with Electronically Controlled Hydraulic Pump

Website

Contact Mr. Rajiv Gugnani

Address K-49, Model Town, New Delhi - 110009 (INDIA)

Phone +(91)-(11)-27234947/27128281 +(91)-9810121208(M)

Fax +(91)-(11)-42371539

E-Mail jrdrp@vsnl.com , jrdrp@airtelmail.in , info@jrdrubber.com

158 J.R. Furnace & Ovens (P) Ltd.

Products Sealed Quench Furnace (use of Thyristor Power Controller and PLC)

Website

Contact

Address No. L-4, S.I.D.C.O. Industrial Estate, Villivakkam, Chennai - 600049, Tamil Nadu, India.

Phone 91-44-45552449/65264893

Fax 91-44-26173262

E-Mail

159 Japan Paper Association / ECCJ (JIEC)

Products Heat recovery boilers for waste combustion, Dryer with dryer bars installed inside forpaper making machine, Steam recompression heat pump, Integration of punched metalscreen, slit screen and maceration machine for processing waste paper, Crowncontrolling roll, Adoption of AC driving for paper making machine and winder system,High concentration pulper, High concentration size press

Website

Contact

Address

Phone

Fax

E-Mail

97

160 Jeu Wat Zipper Co., Ltd.

Products Fully Automatic Hydraulic Hot Chamber with Diesel Burner

Website

Contact

Address 8, Wen Nan 1st St. South District, Tainan City Taiwan 702

Phone (886)-(6)-2922314

Fax (886)-(6)-2922304

E-Mail

161 Jiansu Yangli Group

Products Open Back Double Point Press – PLC Controlled

Website http://www.yangli.com

Contact

Address No.99 Middle Yangtze Road, Yangzhou City, Jiangsu Province, China.

Phone 0086 514 87848251

Fax

E-Mail yll@yangli.com

162 Jinjiang Sheng Da Shoes Machine Trading Co. Ltd.

Products Mackey Sole Stitcher

Website www.sd9999.com

Contact Ms. Wenjuan Zhao

Address No.816,Chenquan Road, Chendai Town, Jinjiang City, Jinjiang, Fujian, China (Mainland).

Phone +86-0595-26883888

Fax

E-Mail

98

163 Jogindra Industries

Products Grey Heat Setting

Website

Contact Mr. Jagjeet Singh

Address R- 5/69, Rama Road, Near Metro Station, Kirti Nagar, New Delhi, Delhi - 110 015, India.

Phone +(91)-(11)-25415338 / 25434786

Fax

E-Mail

164 Johnson Controls India

Products Outdoor intake control/variable air volume/heat exchanger, Building energymanagement system

Website www.johnsoncontrols.com

Contact Mr. Varun Parashar

Address # 507,Delphina Building, 2nd Floor, CMH Road, Indiranagar - 1st Stage, Bangalore- 560 038.

Phone +91-9739777709

Fax

E-Mail varun.parashar@jci.com

99

165 Juki India Private Limited

Products High Speed Flexible Chip Shooter, Direct drive, High Speed, Lockstitch Machine withAutomatic Thread Trimmer, Lockstitch Machine with Automatic Thread Trimmer, Semidry head, High Speed, Overlock Stitch Machine, Computer controlled, High Speed,Lockstitching Buttonholing Machine, Computer controlled, High speed, Lockstitch, ButtonSewing Machine, High speed, Flatbed, Top & Bottom Coverstitch Machine, High speed,Cylinder bed, Top & Bottom Coverstitch Machine, Computer controlled, High speed,Bartacking Machine

Website http://www.jukiindia.com/

Contact

Address Bangalore Office “Ozone Manay Tech Park” 1st Floor, B-Wing, Survey No, 56/18 & 55/9, HosurRoad, Hongasandra Village, Bangalore – 560 068

Phone 080 – 42511900

Fax

E-Mail jukiblr@jukiindia.com

166 Kanak Cryo

Products Oxygen Plant (Manufacture of Oxygen and Nitrogen by Air separation Method)

Website

Contact

Address Plot No. 307, G.I.D.C. Phase – II, Sihor Bhavnagar, Gujarat - 364240 (India)

Phone (91)-9825026497

Fax (91)-(2846)-224106

E-Mail kanakcryossc@yahoo.co.in

167 Khan Machines

Products Fine Grinding (CBN Surface Grinding Machine)

Website

Contact

Address Plot No. C-13, JJ Nagar, Mugappair Industrial Estate, Mugappai West, Chennai - 600 037 TamilNadu, India.

Phone +(91)-(44)-65477215 +(91)-9841050531

Fax

E-Mail

100

168 Kirloskar Brothers Ltd.

Products High Efficiency Turbine Pump for Water Intake

Website www.web.kbl.co.in

Contact

Address Udyog Bhavan,Tilak Road,Pune 411 002, India.

Phone +91-020 24440770

Fax

E-Mail dnbhandari@del.kbl.co.in

169 Kirloskar Toyoda Textile Machinery Pvt. Ltd.

Products Speed Frame Machine

Website http://www.kttml.com

Contact Mr. Ashok Juneja

Address Plot 10 -13, Phase II, Jigani Industrial Area, Jigani., New Delhi, Delhi -560105, India.

Phone +(+91)-(80)-27826201 / 27826206 / 27826215 (+91)-9844639043

Fax +(+91)-(80)-27826207

E-Mail

170 Kirtee Engineering

Products Fully Automatic PLC Hydraulically Operated Moulding Machine

Website www.kirteeepsplants.com

Contact

Address Plot No. 6/1, Gat No. 48, Opp. Simens Ltd., MIDC, Waluj, Aurangabad - 431136, Maharashtra, India.

Phone +91-98227 50131

Fax

E-Mail response@kirteeepsplants.com

101

171 Kotsons

Products Amorphous core transformers

Website www.kotsons.com

Contact

Address A-208 IInd Floor, R.G City Centre, Motia Khan, Pahar Ganj, New Delhi-110055 INDIA.

Phone +91-11-43537460

Fax

E-Mail kotsons@kotsons.com

172 Krishna Engineering

Products Vacuum Dryer

Website www.krishna-engg.com

Contact Mr. Bhupat Pa

Address No. 7, Khodiyar Estate, Near Sakariba Estate, Behind Indo Ahmedabad 382 445, Gujarat, India.

Phone +91-9426064890

Fax

E-Mail info@krishna-engg.com

173 Kwality Power Ltd.

Products Synthic Flat Belt Drives(Replace V belts)

Website www.kwalitypower.com

Contact

Address S. N. 2, Dhaneshwari Building, Ram Nagar Housing, Vastu Udyog Yojana No. 2, Bhosari Pune -411039, Maharashtra, India

Phone +(91)-(20)-65309787

Fax

E-Mail kwalitypower@gmail.com, info@kwalitypower.com

102

174 L. S. Engineering Corporation

Products Simultaneous Jolt/Squeeze moulding machine

Website www. foundrymachineryindia.com

Contact

Address Opp. HoContact no. Jawahar, Central Hospital Road, Ulhasnagar - 421003, Maharashtra, India.

Phone 91- 251 2530524 / 2525711 / 2525866

Fax 91-251- 2706177

E-Mail response@foundrymachineryindia.com

175 Laimura Technology (P) Ltd.

Products Recuperators

Website www.recuperators.in

Contact Mr. Aditya Tibrewal

Address Punwani Chambers 7B, Kiran Shankar Roy Road, 3rd Floor Kolkata 700001 India.

Phone +91 33 22430468/69

Fax

E-Mail central@recuperators.in

176 Larsen & Toubro Ltd. (Welding Products Business)

Products Insulated Gate Bipolar Transistor Based Inverter

Website www.Inteutecticwelding.com

Contact

Address EWAC Administrative Building, 2nd Floor, Gate No. 3, Powai Campus, Saki Vihar Road, Mumbai –400072

Phone 022-67051250

Fax

E-Mail wpb-equipments@powai.Itindia.com

103

177 LASCO Umformtechnik GmbH

Products Hydraulic Double Acting Hammer (Forge Shop)

Website www.lasco.de

Contact Thomas Kranich

Address Hahnweg 139, 96450 Coburg, Germany.

Phone +49 (0) 95 61 / 642-236

Fax

E-Mail lasco@lasco.de

178 Laxmi Engineers

Products Ballmill with High Alumina Tile Lining, High Alumina Balls of Different Size (Raw MaterialProcessing)

Website www.laxmi-group.com

Contact

Address G-588(B), 2nd Phase, M.I.A, Basni, Jodhpur-324005 India.

Phone

Fax

E-Mail

179 Lee Yih Automation Co.

Products Automatic Transfer Unit

Website

Contact

Address No.9, Alley 102, Lane 261, Jhutouzai Rd, Sihu Township, Changhua Country 514, Taiwan

Phone 888-4-8810805

Fax

E-Mail infor@leeyih.com.tw

104

180 LG Electronics India Pvt. Ltd

Products BEE 5 Star rated air conditioner, Heat reclaim ventilation/air conditioning system

Website www.in.lge.com

Contact Mr. Sumit Bajaj

Address Plot No 51, Surajpur Kasna Road, Greater Noida, UP, India.

Phone +91-120-2560960

Fax

E-Mail sumitbajaj@lgindia.com

181 Liang Jiang Shoes Making Machines Co. Ltd.

Products Cement Dryer & Flash Activator Machine (Drying and Reactivation)

Website www.shoenet.org.tw/ljiang

Contact

Address 186-8 Tung Ho Rd., Tsao Tun Chen, Nantou Hsien, Taiwan, Republic Of China.

Phone +86-769-833-1168

Fax

E-Mail langjang@ms26.hinet.net

182 Lloyds Insulation

Products Insulation for Kiln, Top Chamber & Furnace, Insulation for furnace, Improved Insulation for RingChamber, Thermal insulation for hot & cold systems, Forming plastic insulator, Air sealing supportmaterial

Website www.lloydinsulation.com

Contact Mr. Ashu Sharma / Mr. K.K Mitra

Address Post Box No. 4321, Punj Star Premises, Kalkaji Industrial Area, Kalkaji, New Delhi – 110019

Phone +91-9868970770

Fax

E-Mail kk.mitra@lloydinsulation.com

105

183 Lohia Starlinger Ltd.

Products Tape Winder (Using Frequency Drive)

Website http://lohiagroup.com/

Contact

Address D-3/A, Panki Industrial Estate, Kanpur - 208 022

Phone +91 512 3045100

Fax

E-Mail lsl@lohiagroup.com

184 LTP Engineering

Products Spun pipe casting macihne

Website www.engineering.com.my

Contact

Address Sdn Bhd Plot 54, Jalan Johan 1/6, Kawasan Perinductrian Pengkalan 2, Jalan Pusing, 31550Pusing, Perak, Malaysia.

Phone +6(05)-366 3269, +6(05)-3663266

Fax +6(05)-366 3418

E-Mail lmc@engineering.com.my

185 M H Engineering Pvt. Ltd.

Products Catalytic Enamelling Machine

Website http://wiredrawingmachine.co.in/

Contact

Address 340/21, Street No.-1, Friends Colony, Industrial Area, Shahdara, Delhi-110095.

Phone +91-91-120-2659203

Fax

E-Mail

106

186 Maa Santoshi Casting Company

Products Spun pipe casting macihne

Website

Contact Mr. Pritam Singh (Director)

Address Heli Mandi Dadawas Road, Village - Mandpura Pataudi, Gurgaon Haryana, India.

Phone +919210214839, +919810675799 91-1251- 642539

Fax

E-Mail

187 Machinotherm Engineers

Products Gas / Oil Fired Roller Hearth Kiln (Firing Section)

Website http://www.machinotherm.com

Contact

Address 1/9, Sucheta Nagar, (1st floor), Haltu, Kolkata-700 078, West Bengal, India.

Phone +91-98310 96835

Fax

E-Mail machinotherm@gmail.com

188 Macro Furnaces Pvt Ltd

Products Heating and Pumping Units

Website www.macrofurnaces.com

Contact

Address Plot no2, 16/2, Matura Road, Faridabad, Haryana.

Phone 0129-2260004/4080430

Fax

E-Mail

107

189 Magnalenz Furnaces Pvt Ltd

Products Medium frequency induction furnace (replacing cupola)

Website

Contact

Address B/4, Shakriba Estate, Mehdavad Road G.I.D.C., Phase IV, Vatwa, Ahmedabad. Gujarat.

Phone +91-79-25841065 /30917163/ 55120554

Fax

E-Mail

190 Maneklal and Sons (Exports)

Products Heavy Duty Injection Pump Test Bench (with Variable Frequency Drive)

Website

Contact

Address 237 / 239 Perin Nariman Street Fort, Mumbai - 400 001, INDIA.

Phone (+91 22) 22618951 / 22618962

Fax (+91 22) 22618903

E-Mail

191 Manometer India Pvt. Ltd.

Products Electrically heated nitriding furnace

Website

Contact

Address Plot No F-6/4, Road No 22, Wagle Estate, Thane - Mumbai 400604, Maharashtra.

Phone 022 – 25821571

Fax

E-Mail india@monometer.co.uk

108

192 MAS GASAIR SYSTEMS (P) LTD

Products Heat of Compression Air Dryers (Replacing Desiccant Air Dryer)

Website

Contact

Address 3/6, Site 2, Ajanta Compound, Loni Road Industrial Area, Mohan Nagar, Ghaziabad, UP

Phone + (91)-(120)-2658241/42

Fax + (91)-(120)-2658243

E-Mail

193 Mather and Platt Pumps Ltd.

Products High Efficiency Turbine Pump for Water Intake

Website www.matherplatt.com

Contact Mr. Sandeep Pansare

Address 101 Centre Point, 1st Floor, Andheri Kurla Road, M.V.Road, J.B Nagar Andheri East, Mumbai.

Phone +91-9820421086

Fax

E-Mail mnpmum@matherplatt.com

194 Matrusree Electro Heats

Products Infra Red Heaters / Oven, Provision of IR Sensors for Material Movement

Website www.matrusree.com

Contact

Address 1-1-475/1, Gandhi Nagar, New Bakaram, Hyderabad - 500 080

Phone

Fax

E-Mail

109

195 Meena Engineering Works

Products Automatic Rinsing, Filling & Capping Machine for PET Bottles, Automatic Rinsing, Filling & CappingMachine for Glass bottles

Website www.fillingcappingmachine.com

Contact

Address 113, New Modella Ind Estate, Behind Automatic Electric Co, Padwal Nagar, Wagal Estate, Thane-Maharastra.

Phone

Fax

E-Mail

196 Megha Insulation Pvt Ltd

Products Insulation for Kiln, Top Chamber & Furnace, Improved Insulation for Ring Chamber, Insulation forfurnace

Website www. meghainsulation.com

Contact

Address A-11/6th Floor, Dadasahed Jain Flats, Kalanala, Bhavnagar - 364001, Gujarat - India.

Phone

Fax

E-Mail

197 Memco Machinery Mart

Products Temperature Control Drying Oven

Website http://www.weldingmachinemanufacturer.com/

Contact Mr. Sarfaraz Baig

Address 4094 1st Floor Kuch Dilwali Singh Ajmeri Gate Delhi - 110 006, Delhi, India.

Phone +91-9810590603

Fax

E-Mail info@memcomachines.com

110

198 Meta Therm Furnace Pvt. Ltd.

Products Automatic temperature controller, Temperature Control Drying Oven, Gas Fired / Oil CrucibleMelting Furnace, Gas Fired High Temperature Furnace with Automatic Temperature Controller &Recorder (Heat Treatment), Bell Annealing Furnace

Website www.furnaces-ovens.co.in

Contact Mr. C.H. Khandelwa

Address B-5 / 106, Green Land Apartment, J.B.Nagar, Andheri (East) Mumbai - 400 059, Maharashtra, India.

Phone +91-9869135567

Fax

E-Mail metatherm_furnace@yahoo.co.in

199 MICRO Dynamics Pvt. Ltd.

Products Fludised Bed Combustion Boiler (replacing Stoker Boiler)

Website http://www.mircodynamics.com

Contact

Address T-178 , MIDC Bhosari, Pune 411 026 Maharashtra, INDIA.

Phone (+91-20) 27120839 / 30685470

Fax 020 27122678 / 020 30685466

E-Mail sales@mircodynamics.com

200 Micro Engineers India

Products Multi Colour Flexo Printer Slotter for Flexographic Printing

Website http://www.microengineersindia.net/

Contact Mr. Iqbal Singh Bhurjee

Address 603 Peninsula Plaza, A-16 Fun Republic Lane Opposite Laxmi Industrial Estate Andheri (W)Mumbai - 400053, Maharashtra (India).

Phone +91- 9820025570

Fax

E-Mail gbhurjee@bom3.vsnl.net.in

111

201 Micro Services Group

Products PLC Based Package Dyeing Machine

Website http://softwaresolutions.fibre2fashion.com/company/micro-svc-grp/productDetail.aspx?refno=1757

Contact

Address

Phone

Fax

Email

202 Micro Thermal Inc

Products Roller Kiln (by Replacing Conventional Tunnel Kiln)

Website http://www.microthermalinc.com/rollerkilns.htm

Contact

Address S-11/12 Shakti Arcade, Opp. AUDA Water Tank, Science City Road, Ahmedabad-380060, Gujarat,India.

Phone (M) +91-98250-64157; (O) +91-2764-234068

Fax

Email contact@microthermalinc.in

203 MIFA Systems

Products Control Instruments for Firing System

Website http://www.mifasystems.com/controllers.htm

Contact Abhay Upadhye, Darshak Kapadia

Address 702 "AKIK" , Opp. Rajpath Club, Sarkhej - Gandhinagar Highway, Bodakdev, Ahmedabad - 380 015,Gujarat (India)

Phone +91 079 - 2687 0825 / 2687 0885 / 2687 1367

Fax

Email sales@mifasystems.com, info@mifasystems.com

112

204 Mikrons

Products Nauta Mixers (Blenders)

Website http://www.mixers.in/nautamixer.html

Contact Mr S.Soundar, Ms. Anita Soundar

Address 35/36, 2nd Floor, Secretrait Colony, Kilpauk,Chennai - 600 010 ,INDIA

Phone +91-44-26427972, 26650423

Fax +91-44-43548949

Email mikrons@vsnl.net, mikron@airtelmail.in

205 Minwool Rock Fibres

Products Thermal insulation for hot & cold systems

Website http://www.minwool.com/insulation.htm

Contact

Address GOPIKRISHN, 8-2-598/A/1/15, Plot #.15, Road No.10,Banjara Hills, Hyderabad - 500 034, AndhraPradesh, INDIA

Phone +91- 40 - 23351114 / 23351115 / 23351117

Fax +91- 40 - 23350462

Email hyderabad@minwool.com

206 Modern Refractory Erectors

Products Alumina Brick Insulation for Electric Arc Furnace

Website http://www.modernrefractory.com/

Contact

Address 118, Mangalagiri Complex, Gajuwaka, Visakhapatnam –530 026 Andhra Pradesh, India.

Phone +91 891-2517581,6674478

Fax +91 891-2513189

Email mre02@sify.com

113

207 MOLINAeBIANCHI SpA

Products Automatic Seat Lasting Machine (Heal Seat Lasting); Automatic Buffing & Roughing Machine withMicroprocessor Control Mechanism; Cement Dryer & Flash Activator Machine (Drying andReactivation); Automatic Pounding Machine

Website http://www.molinaebianchi.it/index.php?lang=eng

Contact

Address Viale Industria, 213/5, 27029 Vigevano - Italia

Phone +39.0381.345015

Fax +39.0381.345044

Email

208 Mosconi SpA

Products Single/Double width Uhairing Machine; Single/Double width Fleshing Machine

Website http://www.mosconispa.it/page.php?pageid=PHOME001

Contact

Address Viale del Commercio, 7 - 37135 VERONA (ITALY)

Phone +39 045 8200490

Fax +39 045 509855

Email mosconi@mosconispa.it

209 Moulding Machine Manufacturing Pvt Ltd

Products Mechanized moulding machines (with PLC control)

Website http://www.mouldmasters.in

Contact D.S. Sahajwala

Address 3, Madhav Villa, Plot No. 40, Sindhi Society, Chembur, Mumbai – 400071

Phone 022-25204041

Fax

Email mouldmasters@vsnl.net

114

210 MV International (GBM Industries)

Products Oil fired core drying oven

Website

Contact

Address RZ-B-27, Dabri Extn., East New Delhi Delhi. PIN - 110045

Phone +(91)-(11)-25390743/65471839

Fax

Email

211 MVS House

Products Carbon Molecuar Sieve for Nitrogen Generation

Website www.mvslimited.com

Contact

Address E-24, East of Kailash, New Delhi.

Phone

Fax

Email

212 N Teryair Equipment Pvt. Ltd

Products Pneumatic Double Acting Hammer (Forge shop)

Website www.editoolworld.com

Contact

Address A-1, Tirupati Udyog Nagar, Sativali Road, Vasai East, Thane- 401 208 Maharashtra, India.

Phone +91-250-6450239

Fax

Email info@teryair.com

115

213 Nagpur Krishma Machine Tools Pvt. Ltd.

Products Catalytic Enamelling Machine

Website http://www.indiamart.com/nagpurkrishma/index.html

Contact Mr. K. V. S Sarma

Address 1No. U-81, M. I. D. C. Industrial Area, Hingana Road Nagpur - 440 016, Maharashtra, India.

Phone +91-9923699266 / 9823405152

Fax

Email nkmt_nagpur@dataone.in

214 Naik Oven Manuafacturing Co.

Products Oil Fired Rotary Rack Oven

Website www.naikoven.net

Contact

Address 8, Suchita I.E, Talwar Compound, Pokhran Road No2, Maji Wada, Thane, Maharastra.

Phone

Fax

Email

215 Nanhai Xiangda Machinery Co. Ltd.

Products Mackey Sole Stitcher

Website http://fsxiangda.en.alibaba.com/

Contact Ms. Candy Zhou

Address No. 2,nanxing road, hong gang village, li shui town, nanhai district, foshan city, guangdong province,China.

Phone +86-0757-85661928

Fax

Email

116

216 Natraj Flexible Packaging Industry

Products Spice Grinding (Cryogenic Grinding, Automatic FFS Packaging)

Website

Contact

Address C-61, Sector 10, District Gautam Budh Nagar, Noida - 201301, Uttar Pradesh, India

Phone 91-120-3058417

Fax 91-120-4229768

Email

217 New AVM Systech Pvt. Ltd.

Products Continuous Tunnel Dryer with Indirect Fired Hot Air Generator

Website www.avmsystech.co.in

Contact

Address 1/2, Kunal Puram, Mumbai-Pune Road, Pune, Maharastra, India.

Phone

Fax

Email

218 Ningbo Sybo Machinery Co.

Products Prover

Website

Contact

Address Rm.1104-1105,Xintiandi Building 12Th, No.689 North Shijidadao Ave,Ningbo,315040,China

Phone 86-574-87736070

Fax

Email

117

219 NKH Hammers

Products Microprocessor Based Energy Controlled, Pneumatic Clutch Operated, Screw Friction Presses(Forge Shop)

Website www.nkhhammers.com

Contact Mr. Jasmer Singh

Address Plot No. 1, Link Road, Industrial Area-A. Extn., Ludhiana, Punjab, India.

Phone +91-9815011330, +91-161-5011755

Fax

Email info@nkhhammers.com

220 Nota Industries

Products Automatic Cone Winder

Website http://www.notatex.com, http://www.arryinternational.com

Contact

Address Nota Market, Opp. Punjab & Sind Bank, Focal Point, Sherpur Road, Ludhiana-141010. Punjab,(INDIA.)

Phone +91-98723-67567, +91-93165-74700

Fax

Email

221 NSW India Ltd

Products Oil fired core drying oven; Natural Gas Based Oven

Website http://www.ovensindia.com

Contact

Address C-255, Mayapuri Industrial Area, Phase – II, New Delhi -110064, India.

Phone +91-11-28112609

Fax

Email corporate@nswindia.com

118

222 Ocean Extrusions

Products Extruction Lamination Line with Frequency Control Motors

Website

Contact

Address Plot No.265, Road No.3 Phase-1, Kathwada GIDC, Kathwada Ahmedabad, Gujarat, India

Phone (+91) 9724325401

Fax

Email

223 Oerlikon Textile India Pvt. Ltd.

Products Automatic Rotor Spinning Machine with MRPS System

Website http://www.oerlikontextile.com

Contact

Address EIL Complex 414, Senapati Bapat Marg Lower Parel 400 013 Mumbai

Phone +91 22 565 27 900

Fax +91 22 565 27 90

Email info@saurerindia.com

224 Ormazabal

Products Automatic Transfer Unit

Website

Contact

Address Parque Tecnológico, Edf. 104 48170 Zamudio (Vizcaya) Spain

Phone +34 94 431 77 77

Fax +34 94 431 87 37

Email ormazabal@ormazabal.coms

119

225 Osram India Pvt. Ltd.

Products Exclusive transformer for lighting

Website http://www.osram.co.in/

Contact Mr Chandan Bhattacharjee

Address Signature Towers ,11 th Floor , Tower -B,South City -1,Gurgaon -122001.

Phone +91-124-4081581

Fax

Email c.bhattacharjee@osram.co.in

226 Owens Corning

Products Forming plastic insulator; Air sealing support material

Website www.owenscorning.com

Contact Mr. Abdulkader Bengali

Address 701, 7th Floor, Alpha Building, Hiranandani Gardens, Powai, Mumbai, India.

Phone +91-9819987696

Fax

Email

227 PALSER

Products Roughing Machine for Plastic Blocks

Website www.palser.it

Contact

Address Via Ronchetto, 321030 Mesenzana, (VA), Italy.

Phone +39 0332 576414

Fax

Email palser@palser.it

120

228 Pankaj Industries

Products Semi Automatic Capsule Filling Machine (with AC Frequency Drive)

Website

Contact

Address Gala No. 5, Indo Industrial Estate No. 3, Navghar, Village,Vasai Road (E), Thane - 401 210,Maharashtra (India)

Phone +(91)-(250)-2390273/2390734

Fax

Email

229 Paper Board Machinery Company

Products Multi Colour Flexo Printer Slotter for Flexographic Printing; Case Maker & Printer Slotter

Website http://www.corrugatingmachinery.com/

Contact Mr. Bharat Nagpal

Address 115, D.L.F. Industrial Area Phase - 1, Faridabad - 121003, Haryana (India).

Phone +91-9810256789, 9811071540

Fax

Email bharatnagpal@msn.com

230 Paramount Conductors Ltd.

Products Catalytic Enamelling Machine

Website www.paramountconductors.com

Contact

Address 32, MIDC Industrial Area, Nagpur - 440 028 INDIA.

Phone +91-7104-237316, 237288

Fax

Email info@paramountconductors.com

121

231 Pardota Overseas

Products Single Jersey Machines with Open Width Take Up System

Website

Contact Mr. Kamal Saini (Proprietor)

Address A-9, 1st Floor, Roshan Market, Vishwakarma Chowk, Ludhiana - 141003, Punjab, India

Phone 91-161-5021720

Fax

Email

232 Patel Furnace & Forging Pvt. Limited

Products Online shot blasting machine (for cleaning the returns)

Website

Contact

Address

Phone

Fax

Email

233 Pecma Air Systems Pvt. Ltd.

Products Energy efficient air compressors/blowers

Website www.pecmapollutioncontrol.com

Contact Ms. Nikita Pandit

Address 301-302, Competent House, 7, RBC, Commercial Complex, Nagalraya, New Delhi – 110046.

Phone 011-28520437

Fax

Email pecma2002@yahoo.co.in

122

234 Perfect Equipments

Products Rice Milling with Rubber Roller Sum Sheller (Without Parboiling) and Modern Rice Milling

with Parboiling (Paddy Cleaner, Destoner, Rubber Roller Cum Sheller, Paddy Separator, Boiler,

Par boiling System, Dryer, Colour Sorter, Cone Polisher, Quality Control)

Website www.perfectmill.com

Contact

Address No.7, Multi Industrial estate, Gerugambakkam, Chennai, Tamil Nadu.

Phone

Fax

Email

235 Perfect Mechanical System

Products Roller Kiln (by Replacing Conventional Tunnel Kiln)

Website www.perfectmachinesystem.com

Contact

Address 8-A, National highway, Lakhdhirpur road, Opp: Saheb Ceramics, Morbi-363642, Gujarat, India.

Phone

Fax

Email

236 Phillips Electronics India Ltd.

Products Compact fluorescent lamps; Metal halide lamps; High/Low pressure sodium vapor lamps;Light emitting diode; T5 fluorescent tube lights with electronic ballast

Website Contact person: Contact no.: Email Web: http://www.india.philips.com/

Contact Mr R.Nandakishore

Address Motorola Excellence Centre, 5th floor , 415/2, Mehauri, Gurgaon Road, Sector -14, Gurgaon -122001

Phone +91-124-4091900

Fax

Email r.nandakishore@phillips.com

123

237 Pioneer Furnaces

Products High frequency melting furnace

Website www.pioneerfurnaces.com

Contact

Address Plot No. 146-148, G.I.D.C., D1/34, Khira Nagar, S. V. Road, Vitthal Udyognagar – 388 121,Santacrux(W), Via Anand, Gujarat, India.

Phone +91-2692-36182/236197/237458

Fax

Email contact@pioneerfurnaces.com

238 Pioneer Intertrade

Products Pneumatic Double Acting Hammer (Forge shop)

Website www.pioneerintertrade.com

Contact

Address 301-303, “A” Wing, Durian Estate, Goregaon - Mulund Link Road, Goregaon (E), Mumbai India.

Phone +91-22-66787700

Fax

Email info@pioneerintertrade.com

239 Pioneer Water Solutions

Products Automatic Rinsing, Filling & Capping Machine for PET Bottles; Automatic Rinsing, Filling & CappingMachine for Glass bottles

Website www.pioneerwatersolutions.com

Contact

Address No.18, 1st Floor, 8th street, Ashok Nagar, Chennai-Tamilmanadu.

Phone

Fax

Email

124

240 Plasma House

Products Plasma Cutting Inverter

Website http://www.airplasma.net/

Contact Mr. Ganesh Suvarna

Address Work Shop No. 9 & 12, B/3, Ankur Building, Gokuldham, Film City Road, Goregaon (East), Mumbai,Maharashtra.

Phone +91-9892798796

Fax

Email

241 Power Hydraulics

Products Hydraulic Press with Automatic Time and Temperature Controller

Website www.powerhydraulics.com

Contact Mr. M. Anandan

Address Plot - 19, Tass Industrial Estate, Sidco, Ambattur Chennai - 600 098, Tamil Nadu, India.

Phone +91-9444914349

Fax

Email anandan_power@yahoo.co.in

242 Pragati Ceramics

Products Manganese Steel Heat Treatment Furnace with Recupertor

Website http://www.newprajapatirefractories.com

Contact Mr. Gopal Bhai Savadia

Address Tarnetar Road, Near F. C. I. Godown Thangadh, Gujarat - 363 530, India

Phone +(91)-(2751)-220456 / 221029 / 220345

Fax +(91)-(2751)-220543

Email

125

243 Prashant Manufactures Company

Products Tumble Dryer (Dyeing)

Website

Contact

Address Gujarat.

Phone +91-281-6596495

Fax

Email

244 Precious Fab Cast Pvt Ltd

Products Ballmill with High Alumina Tile Lining, High Alumina Balls of Different Size (Raw MaterialProcessing)

Website www.preciousfabcast.com

Contact

Address 4809, Phase - IV, G.I.D.C., Nr. Water Tank, Vatva, Ahmedabad - 382445, INDIA.

Phone

Fax

Email

245 Precision Controls Pvt. Ltd.

Products Condensate recovery & recycle system

Website www.precisioncontrolsindia.com

Contact Mr. Harish Rajput

Address General Block 115/2/1 Bhosari MIDC Pune-411026.

Phone +91-9921880174

Fax

Email harish.rajputpcindia@yahoo.com

126

246 Prem Machine Tools (India)

Products Fully Automatic PLC Hydraulically Operated Moulding Machine

Website www.indiamart.com/premmachinetools/index.htmlt

Contact Mr. Rakesh Kumar Sharma

Address 1M. C. F. 284, Jeewan Nagar, Near Sector 55, Gaunchhi Road,, Opposite Shyam Medical StoreFaridabad - 121 004, Haryana, India.

Phone +91-9212167826

Fax

Email premmachinetools.0@gmail.com

247 Presswell Industries

Products Hydraulic Press with Automatic Time and Temperature Controller; Hydralic Automatic PressMoulding Press

Website www.presswel.com

Contact

Address Plot No-152, Sector-24 Faridabad -121007, Haryana, India.

Phone +91-129-2233665

Fax

Email info@presswel.com

248 Pritul Machines

Products Rotary Rack Oven; Bakery Mechanisation Process

Website www.equipmentsmachinery.com / www.pritul.com

Contact

Address K-1, U.P.S.I.D.C. Industrial Area Begrajpur, Muzaffarnagar-251 203 (U.P.) India. (N.H. 58, On Delhi-Dehradun National Highway)

Phone +91-9557000410,+91-9557000411 +91-9557000412

Fax

Email

127

249 Pyromaster Furnaces Pte. Ltd.

Products Fluidized Bed Heat Treatment Line with Controlled Atmosphere & Recuperators (Heat Treatment)

Website www.pyromasterfurnaces.com

Contact

Address A13, Sidco Industrial Estate Villivakkam, Chennai 600 049 Tamil Nadu, India.

Phone +91-93828 43998

Fax

Email info@pyromasterfurnaces.com

250 Pyung Chang Machinery Co. Ltd

Products Double Polishing Machine (with Inverter Control)

Website http://www.pyungchangmc.com

Contact

Address #1066-20, Eobang-Dong, Kimhae City, Kyungnam, Korea.

Phone +82-55-326-2300

Fax

Email pcm2300@pyungchangmc.com

251 Q tek CNC

Products Balloon Padding Machine

Website

Contact Mr Rajan

Address Edan garden FCI Road,Bharathiyar Nagr Ganapathy Coimbatore- 641006

Phone 0422 – 2512282, 9894061700

Fax

Email

128

252 Qingzhou Water Conservancy Machinery Co., Ltd.

Products Vertical Vibrating Machine

Website www.sdsljx.com

Contact Ms. Linda Lin

Address No.2317 Middle Tuoshan Road, Qingzhou City, Shandong Province, China.

Phone +86 13853650116

Fax

Email shalabh@rishabhindustries.com

253 R. K. Engineering Works

Products Multi Layer FilmExtruder

Website

Contact

Address No. 2 - 11/ A, Ram Mandir Estate, Near Sharma Estate, Goregaon East Mumbai - 400 063,Maharashtra, India.

Phone +(91)-(22)-26851497 / 26852023

Fax

Email

254 Rabatex Industries

Products High Speed Computerized Warping Machine for Knitting

Website http://www.rabatex.com

Contact

Address C-1/356 GIDC Estate, Opp. Housing Colony, Odhav, AHMEDABAD 382415

Phone 0091 79 22871356 , 22891366 , 22976844, 22891996 , 22892483

Fax 0091 79 22872851 , 22891975

Email rabatexad1@sancharnet.in / sales@rabatex.com

129

255 Radhe Renewable Energy Development Pvt Ltd.

Products Biomass Gasifier Based Furnace (Namkeen Making); Thermal gasifier (biomass/coal as fuel)

Website www.radhenergy.com

Contact

Address Plot No. 2621/2622; Road No-D/2, Gate no.1; Lodhika, GIDC, Methoda, Kalvad Road, Rajkot

Phone 0287-287888/287889

Fax

Email

256 Raj Industries

Products Fully Automatic PLC Hydraulically Operated Moulding Machine

Website www.rajepsmachinery.com

Contact Mr. Abhijeet Mane

Address Sr. No. 15/1, Dwarkesh Industries Estate, Gulve Vasti, Bhosari, Pune - 26.

Phone +91-9689108978

Fax

Email rajepsindia@gmail.com

257 Raj Process Equipments & Systems Pvt. Ltd

Products Vacuum Dryer; Auto Spray with Dryer; Steam Heating (Replace Electrical Heating); Flash Dryers orRotary Vacuum Dryers (Product Drying); Seven effect Free Flow Falling Film Evaporator; FallingFilm Evaporator (Re refining of Lubricating Oil); Wiped Film Evaporator (Re refining of LubricatingOil)

Website www.rajprocessequipment.com

Contact Mr.Manish Athavale

Address Jai Ganesh Vision, 3rd Floor B Wing, Jai Ganesh Fame Buildig

Phone +91-9766441144

Fax

Email manish@rajprocessequipment.com

130

258 Rajsen Machines Tools

Products Electro Discharge Machine (Tool Room)

Website www.sinpolinearscale.com

Contact Mr. V. Senthilkumar

Address 2/2 Reddipalyam Road, Mugappair West Industrial Estate, Chennai, India.

Phone +91-44-43537446, 26242111

Fax

Email rajsenmt@yahoo.co.in, sales@rajsen.com

259 RAM SRL

Products Mackey Sole Stitcher

Website www.ramitaly.it

Contact Mr. Roberto Rodella

Address Via S. Felice, 17-25012 Calvisano, Italy.

Phone +39-030-9968587

Fax

Email

260 Ramiconsultancy

Products Gas / Oil Fired Roller Hearth Kiln (Firing Section)

Website www.ramiconsultancy.com

Contact

Address A/8 Jivan Park Co. op. Housing society , Nr. Samrat Nagar, Isanpur Chokdi, N.H.No.8, Ahmedabad-382 443, India.

Phone

Fax

Email

131

261 Ramsons Garment Finishing Equipments (Pvt) Ltd.

Products Wet Fabric Spreading and Squeezing Machine (Dyeing)

Website

Contact

Address

Phone +91-421-2209311/2249180/2206461

Fax

Email

262 Rattan Hammers

Products Friction Drop Hammer

Website www.hammersindia.com

Contact Mr. Jagmeet Singh

Address Mundian Khurd, Chandigarh Road, Ludhiana, Punjab, India.

Phone +91-9876120925, +91-161-2685234

Fax

Email info@hammersindia.com

263 Ravi Power Press

Products Mechanical Pneumatic Clutch Operated Crank Type Billet Shearing Press (Stock Cutting); HotShearing Automatic Forging Presses (Forge Shop); Semi Automatic Press; Hi Speed PrecisionPower Press with Computerized Control

Website www.ravipowerpress.com

Contact Mr. Varun Bembi

Address 56, Hastsal Village, Uttam Nagar, New Delhi, India.

Phone +91-9899568881, 9350781106

Fax

Email vbembi@gmail.com, varun@ravipowerpress.com

132

264 Ravi Power Press

Products Mechanical Pneumatic Clutch Operated Crank Type Billet Shearing Press (Stock Cutting); HotShearing Automatic Forging Presses (Forge Shop); Semi Automatic Press; Hi Speed PrecisionPower Press with Computerized Control

Website www.ravipowerpress.com

Contact Mr. Varun Bembi

Address 56, Hastsal Village, Uttam Nagar, New Delhi, India.

Phone +91-9899568881, 9350781106

Fax

Email vbembi@gmail.com, varun@ravipowerpress.com

265 Red Line Industries Limited

Products Conveyorised Powder Coating Curing Oven

Website

Contact

Address 232 Kaliandas Udyog Bhavan, Behind Century Bhavan, Prabhadevi, Mumbai - 400025,Maharashtra, India.

Phone +91-22-24324737 / 24324787 / 32968954

Fax +91-22-66466936

Email response@powdercoatingequipments.in

266 REIFENHÄUSER (India) Marketing Ltd.

Products Multi Channel Extruder

Website www.reifenhauser.com

Contact

Address 229, Udyog Bhavan,Sonawala Road, Goregaon (East), Mumbai 400 063, India

Phone +91-22-2686 2711

Fax

Email sales@reifenhauserindia.com

133

267 Rekofa Small Tools Pvt. Ltd.

Products Thread Rolling Machine

Website www.rekofaindia.com

Contact : Mr. Jaspal Singh

Address 10542, St. No. 9, Partap Nagar, Ludhiana, Punjab, India.

Phone +91-9814021475, 9888200084

Fax

Email info@ rekofaindia.com

268 Reliable Refractories Pvt. Ltd.

Products Ceramic Fiber Insulation for Batch Furnaces

Website

Contact

Address 13/4, New Swapneel, Kanti Nagar, J.B. Nagar, Andheri (East), Mumbai - 400059 Maharashtra, India

Phone +(91)- (22) - 28231870

Fax +(91)- (22) - 28231864

Email

269 Rhino Machines Pvt Ltd.

Products Variable speed sand mixer; Computer controlled sand cooler mixer; Automatic on line sandcontroller

Website www.rhinomachines.net

Contact

Address Plot no 1, GIDC Phase II, Vithal Udyognagar- 388 121, P.O. Karamsad, Dist. Anand, Gujarat.

Phone +91-2692-653099

Fax

Email rhino@rhinomachines.net

134

270 Ross Boilers

Products Water tube boiler replacing smoke tube boiler

Website www.rossindia.com

Contact Mr. Suhail Shaikh

Address 33, Al Ameen Society, Gultekdi, Pune, Maharashtra, India.

Phone +91-20-24269393, 24272293

Fax

Email sales@rossindia.com

271 Sagar Engineering Works

Products Heavy Duty Plano Milling Machine (using AC Variable Drive)

Website

Contact Mr. Jaswant Singh Sagar

Address 419, Industrial Area - A, Ludhiana – 141003, Punjab, INDIA

Phone +91-161- 2227174, 2227175, 5199010

Fax +91-161- 2601336

Email info@sagarengg.com

272 Sahora Impex India Private Limited

Products Oil Fired Oven Biomass Fueled Multipurpose Drier ; Energy Efficient Wood Fired Low Cost BakeryOven (Bakery Products Manufacturing)

Website www.sahora.in

Contact

Address 411-A, Bharathiyar road, New Siddhapudur, Coimbatore-641044., Tamilnadu

Phone

Fax

Email

135

273 Sai Engineering Company

Products Extruder with Temperature Control, Pre heating, Speed Control

Website

Contact

Address

Phone

Fax

Email

274 Sai Thermoformers

Products Vacuum forming machine with thermostat control

Website

Contact

Address 25, DSIDC Shed Okhla Industrial Area Phase-1 New Delhi-110020, India

Phone +91-11-32913304, 29956897, 40501799

Fax

Email info@saithermoformers.com

275 Saint Gobain Glass India Ltd.

Products Heat absorbing glass /low emissivity glass (window panel)

Website www.saint-gobain.co.in

Contact

Address A-1 SIPCOT Industrial Park, Sriperumbudur, Kanchipuram District, Tamil Nadu, India.

Phone +91-4111- 262832, 39

Fax

Email

136

276 Samarth Air Tech Pvt. Ltd.

Products Modern Industrial Humidification System (for Controlling Relative Humidity & Temperature)

Website

Contact

Address

Phone +91-79-29295056/ 25841742, +919825234539

Fax

Email

277 Samsung

Products BEE 5 Star rated refrigerators

Website Web: www.samsung. com/in

Contact

Address

Phone +91-1800 110011, 30308282

Fax

Email

278 Sanprem Consultants

Products Electro Discharge Machine (Tool Room)

Website www.indiamart.com/company/1688874

Contact Mr. Arun Raj

Address 31 Indira Nagar, Avanashi Main Road Tiruppur, Tamil Nadu, India.

Phone +91-9994775848

Fax

Email

137

279 Sant Engineering Company

Products Cold Feed Extruder

Website www.rubberplasticmachinery.com

Contact Mr.Prem Bimbra

Address 9, community center,vasant vihar, New Delhi, India

Phone +91-9812069660/9215539909

Fax

Email info@rubberplasticmachinery.com

280 Santec Exim Private Limited

Products Hot Shearing Automatic Forging Presses (Forge Shop); PLC Controlled Hydraulic Press

Website www.santecindia.com

Contact Mr. U.K. Sangal

Address Plot No. 92/6, Road No. 1, Mundka Udyog Nagar, Mundka Ex.

Phone +91-9811664677, 9717598990

Fax

Email uksangal@santecindia.com, sales@santecindia.com

281 Santosh Rubber Machinery Pvt. Ltd

Products Cold Feed Extruder

Website www.santoshrubbermachinery.com

Contact

Address 15, Vishveshwar Nagar, Off Aarey Road, Goregaon (East), Mumbai - 400 063

Phone +91-22-28742134

Fax

Email santosh_gc@vsnl.net

138

282 Sarlech Electro Systems

Products Bakery Mechanisation Process

Website www.sarlechgroup.com

Contact

Address 14698, Bhagwan nagar, near dada motors, G.T Road, Ludhiana; Punjab.

Phone

Fax

Email

283 Sarvasv Industrial Corporation

Products Extruder with Temperature Control, Pre heating, Speed Control

Website www.sarvasv.com

Contact Mr. Amit

Address A-153, Shivalik, Opp. Aurobindo College, New Delhi - 110 017, India.

Phone +91-11-66401582, 66401583, 26371583

Fax

Email amit@sarvasv.com

284 Savita Machine Tools Pvt. Ltd.

Products Electro Discharge Machine (Tool Room)

Website

Contact

Address Plot No - 2560, Sr. No. 595/2, Behind Kolhapur Axle, Near M. I .D. C., Shiroli, KOLHAPUR - 416122,Maharashtra., INDIA

Phone 93711 00524

Fax

Email

139

285 Schneider Electric India

Products Variable frequency drives; Exclusive transformer for lighting; Soft starter for motors; Building energymanagement system

Website www.schneider-electric.co.in

Contact Mr. Amit Chadha

Address A-29, Mohan Cooperative Industrial Estate, Mathura Road, New Delhi-110044, India.

Phone +91-9953330043

Fax

Email in.schneider-electric.com

286 Sea Bird Refrigeration Pvt. Ltd.

Products Energy efficient refrigeration system

Website www.amoking.com

Contact Mr. Vijay Kumar Maini

Address 282, Patparganj industrial Area, Patpar ganj, New Delhi, India.

Phone +91-11- 22155684, 22148267

Fax

Email info@amoking.com

287 SECO Warnick Pvt. Limited

Products Induction furnace with cooling tower & water treatment plant

Website

Contact

Address Road No.1, Opp. B.M.C.Office, Chembur, Mumbai - 400 071, INDIA.

Phone +91-22-2528 4028,29,30,31,32, +91-22-6797 3018,19,20

Fax

Email

140

288 Seemsan Pumps & Equipments Pvt. Ltd.

Products Energy efficiency fans/pumps

Website www.seemsanpumps.com

Contact Mr. Sanjay Dimri

Address M-5&7, Samrat Bhawan, Ranjeet Nagar, New Delhi, India.

Phone +91-11-25708648

Fax

Email info@seemsanpumps.com

289 Senior Print Pack Machinery Company

Products Automatic Corrugated Making Plant; Automatic Corrugated Board Plant with Printing Die Cutterusing Thermic Fluid for Heating; Automatic Board Plant; High speed Automatic Board Line &Converting Line

Website www.corrugatedmachinery.net

Contact Mr. Kawaljit Singh

Address 15-3-4 to7, Prajay Mall Complex, Gowaliguda Chaman, Hyderabad - 500 012

Phone +91-9391046397

Fax

Email info@seniorprintpack.com

290 Shachi Engineering Pvt. Ltd

Products Seven effect Free Flow Falling Film Evaporator; Auto Spray with Dryer; Flash Dryers or RotaryVacuum Dryers (Product Drying)

Website www.shachiengg.com, www.shachiindia.com

Contact Mr. M. S. Shanbhag

Address 7, Brilliant Chambers, 84, Mayur Colony, Kothrud, Pune, India.

Phone +91-9822019088, 9371026954

Fax

Email shachi_ engineering@vsnl.com, shachidryers@eth.net

141

291 Shah Electronics

Products Electronic ballast

Website www.shahelectronics.net

Contact Mr. Hitesh Shah

Address A-3, Manohar Villa, New Naroda, Nicol Road, Nr. Naroda Canal, Nicol, Ahmedabad, Gujarat, India.

Phone +91-79-22820421,22813396

Fax

Email sales@shahelectronics.net

292 Shailesh Group of Industries

Products Mechanical Pneumatic Clutch Operated Crank Type Billet Shearing Press (Stock Cutting)

Website www.shaileshmachines.com

Contact

Address 10, Bhaktinagar Station Plot, Rajkot - 360 002, Gujarat, India.

Phone +91-281- 2461102

Fax

Email bharat@shaileshmachines.com

293 Shanghai Esong Mining Machinery Co.

Products Gasifier Based Heat Treatment Furnace

Website www.smec.net

Contact Mr. Ban Gong Shi

Address F5-6, No. 268 Zhongshan Road (S), Shanghai 200010, P.R. China.

Phone +86-21-51156622

Fax

Email smec@smec.net

142

294 Sheards Ltd

Products Yarn Guided Machine with Precision Crossing with Inverter Control

Website

Contact

Address Marlborough Street HealeyWood Industrial Estate Burnley, Lancashire, BB112HW

Phone (0870) 2409220

Fax (0870) 6070167

Email

295 Shri Girraj Industries

Products Hi Chrome Grinding Media Oil Fired Heat Treatment Furnace with Recupertor

Website

Contact

Address No. A-85-B, Road No. 9, VKI Area Jaipur, Rajasthan - 302 016, India

Phone +(91)-(141)-2330719/ 2330447/ 2330670, +(91)-9314772319

Fax +(91)-(141)-2333249

Email info@maharajacastings.com, maharajacastings@gmail. com

296 Siemens Building Technologies Pvt. Ltd.

Products Building energy management system; Variable frequency drives; Soft starter for motors

Website www.sbtdats.com

Contact Mr. Lalit Maheshwari – Business Unit Head

Address 384, Phase II, Udyog Vihar, Gurgaon, Haryana, India.

Phone +91-124-4578100

Fax

Email lalit.maheshwari@sbtdats.com, contact.india@siemens. com

143

297 Sigma Electricals

Products Amorphous core transformers

Website www.sigmaelectricals.com

Contact

Address A - 10 Friends Estate, Pokhran Road No. 1, Upavan, Thane - 400 606. Maharashtra, INDIA.

Phone +91-22-65771497

Fax

Email response@sigmaelectricals.com

298 Simplex Engineering Works

Products Heavy Duty Plano Milling Machine (using AC Variable Drive)

Website www.workshopmachines.net

Contact Mr. Sahil Aggarwal

Address G.T. Road, Amritsar Bye Pass Chowk Batala, Punjab – 143505, India

Phone +91-1871-242518, +91-9988155952

Fax 91-1871-242518

Email info@simplexmachines.com

299 Simplicity Engineers Pvt. Ltd.

Products Electrical Resistance Heat Treatment Furnace

Website www.simplicityfurnaces.net

Contact

Address B-99, Mayapuri, Phase – I, New Delhi – 110064

Phone 011-28115978

Fax

Email simplicity@vsnl.com

144

300 Singhal Power Press Pvt. Ltd.

Products Semi Automatic Press; Hi Speed Precision Power Press with Computerized Control

Website www.sewpresses.com

Contact

Address 202, Karma Stambh, Industrial Estate,Opp. MTNL Office, LBS Marg, Vikhroli (w), Mumbai-400083

Phone +91-22-67969652

Fax

Email headoffice@sewpresses.com

301 Singhs Industries

Products Reduce Rolling Machine (Forge Shop); Thread Rolling Machine

Website www.singhsindustries.com

Contact Mr. Onkar Singh / Ms. Deepali

Address 203, East Mohan Nagar, Amritsar, Punjab, India.

Phone +91-183-2582049, 2588050

Fax

Email singhs@jla.vsnl.net.in

302 Sintech Precision Products Ltd

Products High Efficiency Turbine Pump for Water Intake

Website

Contact

Address C-189/190, Bulandshahar Road Industrial Area, Site no. 1, Ghaziabad – 201001 ( U.P.) - INDIA.

Phone 91-120-4176000(30 Lines)

Fax

Email info@sintechpumps.com

145

303 SMT Machines (India) Limited

Products Reduce Rolling Machine (Forge Shop)

Website www.smtsteelmills.com

Contact Mr. Raman Mittal

Address P. Box. 71, G. T. Road, Mandi Gobindgarh, Punjab, India.

Phone +91-9357755555, +91-1765-256337

Fax

Email info@smtsteelmills.com, info@smtmachinesindia.org

304 Southern Carbon Pvt. Ltd.

Products Use of Biomass Gasifier with Slurry Economizer (Incinerator)

Website www.southerncarbons.org

Contact Mr. Binoy Haris

Address 6/590 B Industrial Development Area,Binanipuram P O, Cochin, Kerala, India 683502

Phone +91-9995821114

Fax

Email southcarb@gmail.com

305 Sparrow Tex Engineering Works

Products Hydro Extractor (Dyeing)

Website

Contact

Address Surat - 395 005, Gujarat.

Phone +(91)-(261)-2892173

Fax

Email sparrowtexeng@gmail.com

146

306 Sree Sakthi Equipments Company

Products Intensive mixers (Molding/Core); Automatic pouring system; Core setter and automatic moldconveyor; Automatic cold box core shooter; Automatic flaskless molding machine

Website Contact noFax:

Contact

Address 898/2, BETTATHAPURAM, KARAMADAI, Coimbatore - 641104, Tamil Nadu, India.

Phone +91-4254-273135/272165

Fax +91-4254-272495

Email

307 Sri Lakshminarasimha Engineers (P) Ltd.

Products Speed Frame Machine

Website

Contact Mr. G. Sudhinder

Address C-11, Private Industrial Estate, Kurichi, Coimbatore, Tamil Nadu - 641 021, India

Phone +(91)-(422)-2675411/2344882/+(91)-9843113575

Fax +(91)-(422)-2675411

Email

308 Srinidhi Engineers

Products Nauta Mixers (Blenders)

Website www.srinidhiengineers.com

Contact Mr.Ramachandra K Kamath

Address C401, Kshitij C.H.S, Wagheshwari Temple, Filmcity Road, Goregaon East, Mumbai 400063

Phone +91-9869008165

Fax

Email srinidhirk@gmail.com

147

309 Stenmech Engineering Works Pvt. Ltd.

Products Multi Chamber Stenter (min 4 Chambers) with Arrangement of Oil / Gas Heating (Finishing)

Website

Contact

Address Gujarat

Phone 91-261-2399620

Fax

Email

310 Strojosvit

Products Double Width through Feed Splitting Machine (Splitting); Through Feed Double width Machine(Shaving)

Website www.strojosvit.eu

Contact

Address Vrchlického 22 794 01 Krnov eská republika. Contact person: Ing. Petr Jonáš,

Phone +420 554 691 469

Fax

Email jonas@strojosvit.cz

311 Sudhir Gensets

Products Natural Gas Fired Power Generating Set (Utility)

Website www.sudhirgensets.com

Contact

Address Plot No-1, Sector-34, E.H.T.P., Gurgaon, India.

Phone +91-124-4168000

Fax

Email info@sudhirgensets.com

148

312 Summits Hygronics (P) Ltd

Products Heat of Compression Air Dryers (Replacing Desiccant Air Dryer)

Website

Contact

Address 739, Avanashi Rd, Goldwins, Coimbatore – 641014, INDIA

Phone

Fax

Email

313 Sunrise Process Equipments

Products "Flash Dryers or Rotary Vacuum Dryers

(Product Drying)"

Website www.sunriseequipments.com

Contact Mr.Ravi Bhosekar

Address 102, Rameshwar Tower, Shimpoli Road, Near Gokhale High School,Borivali (West), Mumbai -400092.

Phone +91-9321062105

Fax

Email speqco@gmail.com

314 Super Sujata

Products Automatic Corrugated Board Plant with Printing Die Cutter using Thermic Fluid for Heating

Website www.supersujata.com

Contact Mr. Kawaljit Singh

Address 271-A, East Mohan Nagar, Amritsar, Punjab, India.

Phone +91-183-2581186, 5094792

Fax

Email info@supersujata.com, associat2003@yahoo.com

149

315 Surface Engineering

Products Rotary Table Machine for Surface Finishing and Polishing (with Inverter Speed Regulation)

Website www.surfaceengineering.it/

Contact

Address Via Quadretto 20013, MAGENTA (MILAN), ITALY

Phone +39-0297003431

Fax

Email info@surfaceengineering.eu

316 Surjeet Industries

Products Multi Colour Flexo Printer Slotter for Flexographic Printing

Website www.surjeetindustries.com/

Contact Mr. Surjeet Singh

Address 491, Patparganj, F.I.E. Industrial Estate, Delhi-110092 INDIA.

Phone +91-9811212574 / 9811893322

Fax

Email surjeet@ surjeetindustries.com

317 Surya Roshini Ltd.

Products T5 fluorescent tube lights with electronic ballast; Compact fluorescent lamps; Metal halide lamps;High/Low pressure sodium vapor lamps; Light emitting diode

Website wwwsroshini.com

Contact Mr B.B Pradhan

Address Motorola Excellence Centre, 5 th floor 415/2,Mehauri Gurgaon Road, Sector -14, Gurgaon -122001.

Phone +91-11-25759051

Fax

Email r.nandakishore@phillips.com

150

318 Suzhou Kexing Concrete And Cement Product Equipment Co.Ltd.

Products Vertical Vibrating Machine

Website www.xdfly.com/en_index.asp

Contact Mr. Jiang Jian Er

Address MaoPeng Road, 658#, XuKou industrial park, SuZhou, JiangSu, China.

Phone +86-512-68081280

Fax

Email jennerjiang@gmail.com, jiangjianer@hotmail.com

319 SVS Hydraulics

Products Pultrosen Machine

Website www.svshydraulics.com

Contact

Address Shed No.2, AP Agro Work Shop Complex, HMT Town Ship, Chintal, Hyderabad - 500 054

Phone

Fax

Email

320 Swastic Group of Companies

Products Washing Range with Arrangement of Tension Free Fabric Drying and Reduced Water Consumption/ Water Reuse System (Dyeing); Radio Frequency / Infrared Radiant Gas Fired / Microwave / Loop /Relax Dryer (Finishing); Heat Recovery Systemfor Stenters; PLC Based Compacting Machine;Relax Dryer; Specialty Fabric Finisher such as Brushing, Sueding, Raising, and Compacting;Automatic Hank / Yarn Dyeing Machine; Hydro Extractor (Dyeing); Fabric Reversing and SlitOpening Machine; Balloon Padding; Open width Continuous Scouring and Bleaching Range withMicroprocessor Control

Website

Contact

Address

Phone 079-6543 5017, 2274 3553/2274 9068

Fax

Email

151

321 Swish Technologies

Products High Efficiency Atomizers in Humidification Plant

Website

Contact

Address Coimbatore

Phone +91-422-2647790

Fax

Email

322 Tech Dry (India) Pvt. Ltd

Products Heat insulating opening material

Website

Contact

Address #769, 1st Cross, Krishna Temple Rd,1st Stage, Indiranagar, Bangalore 560 038.

Phone 080-25255406/294

Fax 080-25289159

Email

323 Technocrat Mouldings Pvt. Ltd.

Products Automatic Injection Soling Moulding Machine

Website

Contact

Address 847 M.I.E. Part A, Bahadurgarh - 124507 Haryana (Near Delhi)

Phone + 91 - 9811144615, 9911504010

Fax

Email

152

324 Technoplus Services

Products Automatic combustion control for boilers/ furnaces

Website www.technoplusservices.com

Contact Mr. N Raghu

Address Plot No.18, Suresh Nagar Main Road,Valasaravakkam,Chennai - 600 087

Phone +91-9840900155

Fax

Email info@technoplusservices.com

325 Technotherma India (Pvt) Ltd.

Products Bell Annealing Furnace

Website www.technotherma.com

Contact Mr. N. Vijayan

Address CB- 210 Basement, Ring Road, Naraina, New Delhi, India.

Phone +91-11-25771257, 25774387

Fax

Email technotherma@vsnl.com, technothermaindia@gmail.com

326 Tecknotrove Systems Pvt Ltd.

Products Electromagnetic irradiation (Microwave heating/Infrared heating)

Website www.tecknotrove-heating.com

Contact

Address 501 Samarpan Complex, New Link Road Sahar Chakala, Mumbai 400099 India

Phone +91-22-66754730

Fax

Email info@tecknotrove.com

153

327 Tenova Hypertherm Pvt Ltd

Products Microprocessor Based Electric Furnace; Highly sensitive and responsive arc furnace; Highperformance electrolytic furnace

Website www.tenovagroup.com

Contact

Address Oberoi Garden Estates, Chandivli, Andheri (E), Mumbai 400 072, India.

Phone +91-22-66810200

Fax

Email tenovahypertherm@hyperthermgroup.com

328 Texfab Engineers (I) Pvt. Ltd

Products Washing Range with Arrangement of Tension Free Fabric Drying and Reduced Water Consumption/ Water Reuse System (Dyeing); PLC Based Mercerizing Machine; Open width Continuous Scouringand Bleaching Range with Microprocessor Control

Website http://www.texfabindia.com

Contact Mr. Mukesh Pachauri

Address Road No.57, Plot No. 5716, GIDC Estate, Surat- 395 003, Gujarat, (India)

Phone +(91)-(261)-2397243/2397844/2397047/ 09898042000 / 9327442000

Fax

Email

329 Texfab Engineers (I) Pvt. Ltd.

Products Washing Range with Arrangement of Tension Free Fabric Drying and Reduced Water Consumption/ Water Reuse System (Dyeing); PLC Based Mercerizing Machine; Open width Continuous Scouringand Bleaching Range with Microprocessor Control

Website http://www.texfabindia.com

Contact Mr. Mukesh Pachauri

Address Road No.57, Plot No. 5716, GIDC Estate, Surat- 395 003, Gujarat, (India)

Phone +(91)-(261)-2397243/2397844/2397047/09898042000 / 9327442000

Fax

Email

154

330 The Dow Chemical Company

Products CO2 Flue Gas Recovery Plant Based on Flue Gas System

Website www.dow.com/amines

Contact

Address Corporate Park, Unit No. 1, V. N. Purav Marg, Chembur, Mumbai, India.

Phone +886-225478732, +91-22-67978553

Fax

Email zansari@dow.com

331 The Zanvar Group of Industries

Products Simultaneous Jolt/Squeeze moulding machine

Website

Contact

Address 47, Shivaji Park, Kolhapur - 416 001, MAHARASHTRA, INDIA.

Phone +91-231-2537395, 537961

Fax 91-231-2573418

Email

332 Thermal Tech Engineering

Products Natural gas fired muffle furnace

Website

Contact

Address

Phone

Fax

Email

155

333 Thermax Ltd.

Products Energy Efficient Boiler with Heat Recovery (Cashew Processing); Energy Efficient Boiler with HeatRecovery (Parboiled Rice Mill);Thermic Fluid Boiler or Steam Boiler using Agri Residue; ThermicFluid Heaters; Steam Heating (Replace Electrical Heating); Conversion to Fluidized BedCombustion Boiler from Stoker Boiler; Condensate recovery & recycle system; Cogeneration; Heatpumps

Website www.thermaxindia.com

Contact Mr. Nitin Singh

Address 14 Mumbai-Pune Road, Wakdewadi, Pune, India.

Phone +91-9873932780

Fax

Email nitin.singh@thermaxindia.com

334 Thermopac Boilers Pvt. Ltd.

Products Thermo Pac (Heating System)

Website http://www.thermopac.in

Contact

Address Plot No.349, Kashi-Mira Road, Near Rly. Crossing, Bhayander (E), Dist Thane - India

Phone

Fax

Email

335 THERMOTEC Furnaces (India)

Products Electrically heated die heating furnace

Website

Contact Mr. Davendra Verma

Address Plot No. 1, Sector - 16-18, Dividing Road, Opposite Jain Mandir, Faridabad - 121001, Haryana, India

Phone +919891066986, +919818342474

Fax

Email

156

336 Thermotech Engineering Company

Products Continuous Gas Carburising Furnace with Endogas Generator

Website

Contact K.Suresh Warrier

Address E-48, SIDCO Industrial Estate, P.O.Box No.4432, Coimbatore-641 021, TAMIL NADU, INDIA

Phone +91-422-2672570

Fax +91-422-2438168

Email support@warriar.com, sales@warriar.com,warriers@ msn.com

337 Torielli

Products Fine Turning machine (for Last)

Website www.torielli.com

Contact Mr. Jan Surya Sharma

Address 10, Siri Fort Road, II foor, New Delhi 110049 – INDIA.

Phone +91-11-26258572

Fax

Email torindlh@ndf.vsnl.net.in

338 Trane India Pvt. Ltd.

Products Heat pumps; Outdoor intake control/variable air volume/heat exchanger; BEE 5 Star rated airconditioner

Website www.trane.com

Contact Mr.Anurag Agarwal

Address 612 - 614A, International Trade Tower,Nehru Place, New Delhi, India.

Phone +91-9871160690

Fax

Email anurag_agarwal@trane.com

157

339 Transparent Energy Systems Private Limited.

Products Conversion to Fluidized Bed Combustion Boiler from Stoker Boiler; Cogeneration; Thermic FluidBoiler or Steam Boiler using Agri Residue; Biomass Gasifier Based Hot Water Generator

Website www.tespl.com

Contact Mr. Sudhanva S. Gharpure

Address Pushpa Heights,1st Floor, Bibwewadi Corner, Pune, India.

Phone +91-20-24211347, 24212390

Fax

Email trans@pn2.vsnl.net.in, mumbaioffce@tespl.com

340 Uma Shankar Engineers

Products Sealed Quench Furnace (use of Thyristor Power Controller and PLC)

Website

Contact

Address C- 143, Okhla Industrial Area, Phase - I, New Delhi - 110 020 India

Phone 41613675 / 9810188622 / 9871701133

Fax

Email avtar27@yahoo.co.in , umashankarengineers@gmail.com

341 UPTECH Engineering

Products Heavy Duty Multi coil Electromagnetic Rectangular Chuck (with Variable Control Unit)

Website

Contact

Address

Phone

Fax

Email

158

342 Urja Process & Technologies Pvt. Ltd.

Products Roller Steamer / Polymeriser (Dyeing)

Website

Contact

Address Pune

Phone +(91)-(20)-27691800

Fax

Email

343 Usha International Ltd

Products Energy efficiency fans/pumps

Website www.ushainternational.com

Contact Mr. K. B. Singh

Address Surya Kiran,19, Kasturba Gandhi Marg, New Delhi, India.

Phone +91-11-23318114

Fax kb_singh@ushainternational.com

Email

344 Vacon Drives and Controls Pvt Ltd.

Products Variable Frequency Drive for Humidification Fan; Variable Frequency Drive for WaterCirculating Pump; Variable Frequency Drive for Autocore Suction Motor

Website

Contact

Address

Phone 044-24490029

Fax

Email

159

345 VARAJ Engineering

Products Cashew Processing (Boiler, Heat Exchanger with Complete Accessories, Packaging Machine, etc.)

Website www.varajengineering.com

Contact

Address Plot No.9/1, G Block, Near MIDC Corner Chowk, YCM Hospital road, G Block, MIDC, Bhosari, Pune-411026.

Phone

Fax

Email

346 Veejay Lakshmi Engineering Works Limited

Products Automatic Cone Winder

Website Sengalipalayam, Coimbatore 641 022, Tamilnadu, India Contact no:

Contact

Address

Phone +91 (422) 2460662, 2460365, 2460561, 2460562, 2461564, 2461672

Fax +91 (422) 2461565, 2460453

Email sales@veejaylakshmi.com, spares@veejaylakshmi.com

347 Veesons Energy Systems Private Limited

Products Condensate recovery & recycle system; Water tube boiler replacing smoke tube boiler; Conversionto Fluidized Bed Combustion Boiler from Stoker Boiler; Steam Heating (Replace Electrical Heating);Thermic Fluid Boiler or Steam Boiler using Agri Residue

Website www.veesons.com

Contact Mr. Shanmugkanathan

Address 1256, C-14/2, Industrial Estate , Thuvakudi, Tiruchirapalli, Tamil Nadu, India.

Phone +91-9361615150

Fax

Email msn@veesons.com

160

348 Via G.M. Dallari

Products Humidity Driver Chamber (Drying)

Website

Contact

Address 2 - 41049 Sassuolo (MO) – Italy

Phone +39-0536-801207

Fax +39-0536-807248

Email sales@ms-plants.it

349 Vibrant Thermal Engineering

Products Continuous Gas Carburising Furnace with Endogas Generator

Website

Contact Mr. S. Venkatraman

Address No. 11/27, North Mada Street, Poonamallee Chennai, Tamil Nadu - 600 056, India

Phone +(91)-(44)-26272680/ 9444063455

Fax

Email

350 Viet Mold Machine Production Trading Services Co Ltd.

Products Cashew Peeling Machine with Screw Compressor

Website http://www.vietmoldmachine.com

Contact

Address 138A Dinh Bo Linh St, Ward 26, Binh Thanh Dist, Ho Chi Minh City, Viet Nam

Phone 84.8.62537904

Fax

Email admin@vietmoldmachine.com

161

351 Vijai Electricals Ltd.

Products Amorphous core transformers

Website www.vijaielectricals.com

Contact

Address 6-3-648/1&2, Off Raj Bhavan Road, Somajiguda, Hyderabad, India.

Phone +91-40-30617777

Fax

Email marketing@vijai.co.in

352 Vinayaka Engineering Works

Products Cashew Peeling Machine with Screw Compressor

Website

Contact

Address Plot No. 254, 8th ‘A’ Road, Industrial Area, Baikampady, Mangalore - 575011, Karnataka, India

Phone 91-824-2407939 / 2501977

Fax

Email

353 Virka Textile (P) Ltd.

Products High Speed Single Jersey Knitting Machines; High Speed / Ultra High Speed Knitting Machines

Website http://www.virkatextiles.com/

Contact

Address 862, Industrial Area A Ludhiana (India)

Phone 91-161-2607592, 4696592

Fax 91-161-2602592

Email

162

354 Vison Refractories Pvt. Ltd.

Products Ceramic Fiber Insulation for Batch Furnaces

Website

Contact

Address

Phone

Fax

Email

355 Vortexair

Products Transvector Nozzle for Cleaning Application

Website

Contact

Address

Phone 805-658-0207

Fax 805-658-2789

Email static@ccsteven.com

356 Warpp Engineers Pvt. Ltd.

Products Inverter Based Welding Machine

Website

Contact

Address

Phone

Fax

Email

163

357 Weifang Ocean Construction Machinery Co. Limited.

Products Vertical Vibrating Machine

Website http://pipemc.en.china.cn/

Contact Ms. Ocean Bao

Address No.111,Anqiu ST, WeiFang, China (Mainland).

Phone +(86)-(536)-4749153

Fax

Email concrete.pipe.machine@gmail.com

358 Wellcut Tools (India) Pvt. Ltd.

Products Friction Drop Hammer; Thread Rolling Machine

Website www.wellcuttools.com

Contact Mr. S. Balbir Singh

Address C-137, Phase-V, Focal Point, Ludhiana, Punjab.

Phone +91-9814341253, 9814001859

Fax

Email sales@wellcuttools.com, wellcut_tools@rediffmail.com

359 Welmech Engineering Company Pvt. Ltd.

Products Electrically heated nitriding furnace

Website

Contact Mr. R. G. Satagopan

Address No. 11-A/1, Development Plot, SIDCO Industrial Estate,Ambattur, Chennai, Tamil Nadu - 600 098,India

Phone +(91)-(44)-42270222/ 26252880/ 26256364/+(91)-9840908343

Fax

Email

164

360 Wenzhou Zhuda Shoes Making Machinery Co. Ltd.

Products Automatic Pounding Machine

Website www.chinazhuda.com

Contact Mr. Ryan Chen

Address No.98,Jiashe Road Ouhai Baixiang Industrial zone, Wenzhou, Zhejiang,China (Mainland)- 325015

Phone +86-577-85699555

Fax

Email

361 Wesman India

Products Removable hearth type chamber (with computer compatible temperature controller); Inductionfurnace with cooling tower & water treatment plant; Sealed Quench Furnace (use of Thyristor PowerController and PLC); Improved Oil Burners (Biscuit Plant); Liquid and Gaseous Fuel RatioControllers (Ratiotrols); High Efficiency Burners with Multifuel Capacity; Bell Annealing Furnace;Regenerative burners for furnace; High Efficiency Industrial Furnace in Aluminum Factory

Website Wesman Center, 8 Mayfair Road, Kolkata 700 019, India.

Contact

Address

Phone +91 (33) 40020300

Fax +91 (33) 22908050, 22816402

Email mailbox@wesman.com

362 Westchester Sewing Machine Co.

Products Servo motor Stitching Machines

Website www.westchestersewing.com

Contact

Address PO Box 447 , Nanuet NY 10954, Artisian Sewing Supplies, 6470 Corvette Street, Commerce, CA90040 U.S.A.

Phone 800-225-8342 / 845-627-8873

Fax 845-627-6949

Email info@artisansew.com

165

363 Whirler Centrifugals Pvt Ltd.

Products Industrial Washing / Drying Machine / Tumble Dryers; Tumble Dryer (Dyeing); Balloon PaddingMachine

Website

Contact

Address 1213, Phase-3, GIDC Ind. Estate, Vatva, Ahmedabad - 382 445, Gujarat, India.

Phone +(91)-(79)-25890021

Fax

Email whirlcent@gmail.com

364 Wittemann India

Products CO2 Flue Gas Recovery Plant Based on Flue Gas System

Website www.pureco2nfdence.com

Contact Mr. Rakesh Lonial

Address Plot 454, GIDC, N. H. 8, Por – Ramangamdi, Vadodara, Gujarat, India.

Phone +91-9891509509

Fax

Email rlonial@wittemann.com

365 Wuhu Surmount Machinery & Equipment Co., Ltd

Products Clutch Motor Stitching Machines with 3 phase Motor

Website

Contact

Address WUHU MACHINERY & INDUSTRIAL ZONE, Wuhu, Anhui, China (Mainland) /241100

Phone 86-553-8732158

Fax 86-553-8731866

Email

166

366 Xtreme Mech Xperts

Products Electrical Resistance Heat Treatment Furnace

Website

Contact

Address

Phone

Fax

Email

367 Yokogawa Electric Corp

Products Automatic temperature controller; Automatic combustion control for boilers/ furnaces

Website www.yokogawa.com

Contact Mr. Avnish Garg

Address Plot No.96, Electronic City Complex, Hosur Road, Bangalore - 560 100 India.

Phone +91-80-4158-6000

Fax

Email avnish.garg@in.yokogawa.com

368 Young pearl Machinery Co. Ltd.

Products Single/Double width Fleshing Machine; Through Feed Double width Machine (Setting)

Website www.young-pearl.com

Contact

Address No.35 , Jiangyang East Rd. , YZ , JS , CN 225003 Prc.

Phone +0514-87233712/87229185

Fax

Email yp@young-pearl.com

167

369 Yuvraj MERCH X

Products High Speed Circular Knitting Machines; Woven Like Corduroy Machine; Single Jersey AutoStriper Machines; Single Jersey Machines with Open Width Take Up System; High SpeedSingle Jersey Knitting Machines; High Speed / Ultra High Speed Knitting Machines; TerryKnitting Machines; Float Plating Denim Machine; Interlock Knitting Machines; 3 ThreadFleece Machines (Ploy Plating)

Website http://www.yuvrajindia.com

Contact Mr. M. M. Elango

Address Agent : Pailung Machinery Mill Co. Ltd., Yuvraj Trade Centre, 1/1(B)-1, Gandhi Road, Avinashi MainRoad, Annupparpalayam (p.o), Tirupur - 641652. India.

Phone 0091-421-4343700/ 0091 - 98940 - 47400

Fax 0091-421-4343733

Email elango@yuvrajindia.com

370 Zeco Aircon Industries Pvt. Ltd.

Products Outdoor intake control/variable air volume/heat exchanger

Website www.zecoaircon.com

Contact

Address DDA Shopping Complex, E Block, 2nd Floor, New Rajinder Nagar, New Delhi, India.

Phone +91-11-45666111

Fax

Email delhisales@zecoaircon.com

371 Zeta India Inc.

Products Automatic flaskless molding machine; Compact vertical moulding machine

Website Contact no : 80 – 2836 3753, 2836 4322

Contact

Address B-238, 6th Main Road, Peenya Industrial Estate, Bangalore - 560 058, INDIA.

Phone

Fax

Email

168

372 Zhucheng Kyrgyzstan Hengtai Machinery Co., Ltd.

Products High concentration pulper

Website

Contact

Address

Phone

Fax

Email

373 Zhuji Fengzu Computer Knitting Machine Co. Ltd.

Products Terry Knitting Machines

Website http://fengzu.en.ec21.com/

Contact

Address Datang Industrial Area Shaoxing Zhejiang 311801, China

Phone 86-575-87113480

Fax

Email