STEP 6• Point the controller directly at your

DVD player. • Remove the blue PROGRAMMING

CARD from the InteracTV controller and insert the yellow TEST CARD into the InteracTV controller.

STEP 7• If this test screen appears on your TV,

proceed to step 8.• If this screen does NOT appear on your

TV, remove the test card, return to Step 3, and try the next code listed for your DVD player.

• If there is only one code listed for your DVD player, please refer to Step 10.

STEP 8• Listen carefully to the instructions you

will hear.• Press each letter on the test card, as

well as both arrow buttons on the controller.

• As each is pressed, it should highlight on your TV screen.

STEP 9• If each letter and both arrow buttons

highlight on screen, your test is complete and this screen will appear on your TV. You are now ready to play InteracTV.

• If one or more letters or arrows do NOT highlight on screen, remove the test card, return to Step 3, and try the next code listed for your DVD player.

• If you are still unsuccessful, refer to Step 10.

STEP 10• If you have entered all the codes listed for your DVD player and your test card still

does not work successfully, refer to METHOD 2 – PROGRAMMING THE UNIT USING MANUAL SEARCH in the USER's MANUAL.

• If you try METHOD 2 and still have problems programming or testing the remote, please visit www.fisher-price.com/us/interactv for an animated version of this Instruction Sheet, or call 1-888-892-6123.

TESTING YOUR CONTROLLER

1• 888 • 892•6123Questions or Comments?

���� ��� ��

Sesame Workshop ®, Sesame Street ® and associated characters, trademarks and design elements are owned and licensed by Sesame Workshop. ©2003, 2004 Sesame Workshop. All Rights Reserved. ©2003, 2004 Viacom International Inc. All Rights Reserved. Nickelodeon, Nick Jr., Dora the Explorer and all related titles, logos and characters are trademarks of Viacom International Inc. ©2003, 2004 Viacom International Inc. All Rights Reserved. Nickelodeon, Nick Jr., Blue's Clues and all related titles, logos and characters are trademarks of Viacom International Inc. ©2003, 2004 Viacom International Inc. All Rights Reserved. Nickelodeon, SpongeBob SquarePants and all related titles, logos, and characters are trademarks of Viacom International Inc. Created by Stephen Hillenburg. InteracTV is a mark of Beep Telecommunications and Computing, L.L.C. Used under license.Fisher-Price, Inc., a subsidiary of Mattel, Inc., New York, New York 10010 U.S.A. PRINTED IN CHINA. Manufactured for Fisher-Price. ©2003,2004 Mattel, Inc. All Rights Reserved. Fisher-Price and the Fisher-Price logo are U.S. trademarks of Mattel, Inc. Packaging and address should be retained for future reference.Mattel Canada Inc., Mississauga, Ontario L5R 3W2. You may call us free at 1-800-665-6288. Mattel U.K. Ltd., Vanwall Business Park, Maidenhead SL6 4UB. Helpline 01628500303.Mattel Australia Pty., Ltd., Richmond, Victoria. 3121. Consumer Advisory Service - 1300 135 312. Mattel East Asia Ltd, Room 1106, South Tower, World Finance Centre, Harbour City, Tsimshatsui, HK, China. Diimport & Diedarkan Oleh: Mattel SEA Ptd Ltd.(993532-P) Lot 13.5, 13th Floor, Menara Lien Hoe, Persiaran Tropicana Golf Country Resort, 47410 PJ. Tel:03-78803817, Fax:03-78803867. Mattel, Inc., El Segundo, CA 90245 U.S.A. Consumer Affairs 1 (800) 524-Toys.

Item No : B9376-G2Version : EnglishSize : 17 x 11" Paper : Woodfree paper 80 gsmColor : BlackDate : Aug,23. 2004 (AW)

STEP 1• Install 3 “AA” batteries into the back

of the InteracTV controller.• Turn your TV and DVD player ON.

PREPARING YOUR CONTROLLER

STEP 2• Insert the InteracTV DVD that comes

with your controller into your DVD player.

• You will watch a brief message and tutorial, which is then followed by a menu screen.

STEP 3• Insert the blue PROGRAMMING CARD

into the InteracTV controller. When the card is properly inserted, the green light on the bottom right of your controller will blink twice.

• If the green light does NOT blink twice, remove the programming card and try again.

STEP 4• Refer to the Manufacturer's Code Booklet

to find the manufacturer and model number of your DVD player. If your specific model number is not found, enter the first code listed under ALL MODELS.

(Note some manufacturer's will have only one code listed).

STEP 5• Using the numbers on your programming

card, enter the code you found in Step 4. Use the white forward arrow button on the controller to enter "0".

• After entering the 4th digit of the code, the green light on the controller should blink one long blink.

• If you do NOT see this long blink, remove the programming card, re-insert it into the controller and try the same code again.

• After repeated attempts, if you still do NOT see the long blink, remove the programming card and enter the next code listed under ALL MODELS.

Green Light

Green Light

PROGRAMMING YOUR CONTROLLER

Menu Screen

Sony DVPF21 0469Sony DVPNC600 0469Sony DVPNS300 0469Sony DVPNS325 0469Sony DVP-NS315 0469Sony DVPNS415 0469Sony DVPNS425P 0469Sony DVPNS700 0469Sony DVPNS715 0469Sony DVP-NS725P 0469Sony DVP-S560D 0469Sony SLVD100 1118Sony SLVD300P 1118Sony ALL MODELS 1018,0469,

0443,1118Sylvania DVC860D 0487Sylvania DVL100 0487Toshiba SD1200 0451Toshiba SD2150 0451Toshiba SD2705 0451Toshiba SD2800 0451Toshiba SD2900 0451Toshiba SD3750 0451Toshiba SD3800 0451Toshiba SD3900 0451

MANUFACTURER MODEL CODE

Sony SLVD100 1118Sony SLVD300P 1118Sony ALL MODELS 1018,0469,1015,0464,0827,0024*,

0443,1118Sylvania DVC860D 0487

������������

QUICK SET-UPINSTRUCTIONSQUICK SET-UPINSTRUCTIONSQUICK SET-UPINSTRUCTIONS

IMPORTANT: Keep these instructions,InteracTV disc, PROGRAMMING CARD, and

TEST CARD for future reference as they contain important information.