PRESENTATION -2021

JDLsagroup active areas of companies are Refinery Robotic tanks cleaning, Waste management, Energy drink, Commodity, Fuel trading (LPG, AVIATION FUEL, GASOIL, JP-A1) Refinery coke drum skirt holes and slot cutting technology, export and import, chemical additive and consulting services. JDLsagroup continues to negotiate to establish an LPG cylinder factory in South Africa.

Group of companies has been developed with an experienced management team and a good relationship with the global market. The success in our corporate business is researching for professional trades, secured business and well-established relations for both parties set out in law.

Introduction to JDLsagroup

LPG - Liquefied petroleum gas

LPG (Liquefied Petroleum Gas) is made of refined petroleum or natural gas.

Liquefied petroleum gas, or LPG is one of the most common alternative fuels used in the world today. In fact, in many places, it isn’t an alternative fuel at all.

LPG is primarily used as a thermal fuel and is consumed by industrial, commercial and household consumers. It burns cleanly, releasing very few Sulphur emissions, and posing no ground or water pollution hazards. There are over a thousand applications of LPG particularly in commercial and industrial businesses.

1. Industrial customers: for heating purposes where a readily controlled temperature is needed, i.e. motor vehicle paint shops or as fuel for forklift trucks within warehouses etc.

2. Commercial: This includes, for example, a shopping centre with a number of restaurants which may have one bulk tank with LPG reticulated to individual restaurants/stores.

3. Autogas: LPG can also be used to power motor vehicles. Vehicles that use Autogas are fitted with two fuel tanks, one for Autogas and another for petrol/diesel. The vehicle can therefore switch between Autogas and petrol/diesel at any time.

4. Households: LPG is mainly used by households for heating and cooking. Recently, residential estates have also started installing LPG reticulation systems supplying gas into the different properties inside

Standard Specification Liquefied Petroleum Gas (LPG)

PROPANE SPECIFICATION TEST METHOD

Methane content 10 ppmv maximum ASTM D2163

Ethane content 2.0 liqvol% maximum ASTM D2163

Propane content 95.0 liqvol% minimum ASTM D2163

Butanes content 3.0 liqvol% maximum ASTM D2163

Pentanes + content 15 ppmv maximum ASTM D2163

Olefins content 0.05 wt% maximum ASTM D2163

Vapor pressure 200 psig max at 100۰F ASTM D1267

Corrosion (copper strip) 1 maximum ASTM D1838

Total sulfur 15 ppmw maximum ASTM D2784

Hydrogen sulfide content negative ASTM D2420

Total oxygenate content 10 ppmw maximum TBD

Water content 10 ppmw maximum ASTM E - 700

Residues

1) Residue number2) Oil number

10 maximumPass test requirements

ASTM D2158ASTM D2158

BUTANE SPECIFICATION TEST METHOD

Methane content 10 ppmv maximum ASTM D2163

Ethane content 10 ppmv maximum ASTM D2163

Propane content 2.0 liqvol% maximum ASTM D2163

Butanes content 97.0 liqvol% minimum ASTM D2163

Pentanes + content 1.0 liqvol% maximum ASTM D2163

Olefins content 0.1 wt% maximum ASTM D2163

Vapor pressure 70 psig max at 100۰F ASTM D1267

Corrosion (copper strip) 1 maximum ASTM D1838

Total sulfur 15 ppmw maximum ASTM D2784

Hydrogen sulfide content negative ASTM D2420

Total oxygenate content 10 ppmw maximum TBD

Water content 10 ppmw maximum ASTM E - 700

Residues

1)Residue number

2)Oil number

10 maximum

Pass test requirements

ASTM D2158 ASTM

D2158

LPG will be delivered as single-phase pressurized liquid products and will meet the quality requirements as defined in the table. For the loadingoperation, the propane and butane products are delivered via the loading arms onto the LPG ships at approximate temperatures of - 42۰ C and – 6۰ Crespectively. The exact loading temperature will be a function of the loading conditions and product composition and may vary slightly.

Petroleum Products

JDLsa group of companies provide the supply chain by securing the petroleum products to customers from national or international refineries.

We provide fuel storage solutions that are both cost effective and increase the productivity and efficiency of your business

We trade in products under the following categories.

• LPG (Liquefied petroleum product)

• AVGAS 100 LL (Aviation gasoline used to power piston-engine aircraft)

• DIESEL (Gasoil )

• MGO (Marine Gas Oil)

• JET A1

T1000 - DTW

Dirty Tank Wash Improved Formula

Safe, reusable and environmentally responsible industrial pipe and tank cleaning solution on the market.

T1000 – DTW addresses hydrocarbon build up in tanks and pipes that presents in the form of sludge, grime, asphaltenes and waxes or contaminants.

T1000 – DTW has been used in several applications where it has delivered consistent outstanding results for our customers.

T1000 – DTW is unique in its formulation as it is completely environmentally responsible whilst combating the hydrocarbon on a molecular level.

Traditional toxic hydrocarbon-based cleaners or high-pressure water blasting leaves a waste product that cannot be reused or recycled and is expensive to dispose of.

To date there has never been a product option that not only significantly reduces the environmental impact but also completely eliminates the inherent OHS risk.

The benefits are:Reusable:

Not only does T1000

DTW significantly reduce the impact on the environment through its unique formulation, but as it is reusable many times, it further proves its incredible environmental accreditation.

Low cost:

Traditional tank cleaning is an expensive process with high labor and safety costs as well as significant down time for the tank or infrastructure. T1000 DTW reduces this down time by over 60% as well as costing around 50% of traditional cleaning systems.

Safe:

In the USA alone there has been 51 recorded deaths in the last 15 years within the tank cleaning industry. T1000 DTW and the unique cleaning process completely eliminates these safety risks as there is no need for high risk confined space works.

Value adding:

With traditional cleaning methods for the fuel, oil and asphalt sectors, the waste is generally destined for land fill. Using T1000 – DTW this waste becomes a reusable or saleable product, thus further increasing the profitability of T1000 – DTW and the unique cleaning process.

60% less tank downtime. No entry means safer process. We repurpose the material, making it more eco friendly. Less overall cost than manual tank cleaning Reusable. Transforms hydrocarbon sludge. Reduces viscosity. Increases flow.

T1000 – DTW ( Physical Make Up)Nontoxic- No hydrocarbons - Bio degradable Noncorrosive

Where Can I Use T1000 – DTW

Refineries Oil Pipelines

Road Tankers Oil / Fuel Storage

Rail Tankers Fuel Tankers

Fuel supply Lines Shipping Tankers

Bitumen Pipes Bitumen Factory

Bitumen Tankers

Aviation Gasoline Avgas 100 LL

Characteristics

Aviation gasoline AVGAS 100LL is a high-octane mixture of hydrocarbons prepared by the processing of crude oil. It contains anti-

knock, anti-oxidant, dye and anti-static additives.

Application

Aviation gasoline AVGAS 100 LL is used to power piston-engine aircraft.

Stability

Properly stored aviation gasoline meets requirements of the above specification in a period of not less than 12 months from the date of manufacture.

Packaging, storage and transportation

Aviation gasoline AVGAS 100LL is delivered in a special tank trucks, iso-tank containers and steel drums approved for transport of aviation gasoline . Make sure that the packaging in which gasoline will be transported is clean, dry and undamaged. Each package unit as well as truck's transport documents should clearly and permanently indicate:

Avgas 100 LL Product Specifications

Aviatopfuel Drums loading procedure

Drums specification:

All Aviatopfuel Aviation drums are brand new, clean, produced from the highest quality raw materials.

Drums with extruded closing rings, non-removable head and two metal closures 2” and ¾” used for Avgas are produced according to standard PN-EN ISO 15750 – 2. They are marked in hard way by pressing number of certificate on the bottom of drum and / or printing number of certificate on the body of the drum. There is Aviatopfuel Aviation logo marked on surface.

20 foots in length containers loading capacity is 80 Drums.

40 foots in length containers loading capacity is 160 Drums.

Tracks loading capacity is 72 Drums.

Delivery of aviation fuel in steel drums(barrels) capacity of 216 liters and can be filled with ca. 195 liters of Avgas

AVIATOP Fuels ISO Tank loading

An ISO Tank is a tank container, which is built to the ISO standard (International Organization for Standardization). ISO tanks are designed to carry liquids in bulk, both hazardous and non-hazardous.

The tank is made of stainless steel and is surrounded by various types of protective layers. It can be shipped via multi-modal methods in container ship cells, container road chassis or container rail cars.

An ISO tank container is a large stainless-steel pressure vessel held within a 20-foot ISO frame that is used for the transportation and storage of bulk liquids.

ISO tanks can be stacked with each other generally as normal dry box containers, offering sparing space distribution on vessels and as temporary storage.

The ISO tank container is capable of carrying up to 26,000 liters per tank and can be transported both on roadways and railroads; thereby greatly reducing carbon footprints.

ISO 20′ with capacity of 17.000 kg may be loaded with maximum 23700 liters of Avgas. All tank containers are manufactured under ISO 9001 Quality Management System

The Gromovo production specifications and main criteria:

Aviatopfuel terminal is located on a 19,3-hectare site next to Gromovo town, Priozrsky district Leningradsky region. It is one of the most technically advanced oil products rehandling and distilling terminals nearby St. Petersburg. Also there is a storage area designed for the calibrated products.

The discharge capacity is 2 000 t / day. The loading capacity is 1 000 t / day.

We offer:

Receiving, storage and shipping of oil products by lorry and train in gasoline tankers and gasoline tracks, laboratory control, preparation of all the necessary documents;

We recieve, process, store and ship the gas condensate and refined products (low-viscosity component of marine fuels with a sulfur content no more than 250 ppm, a solvent for industrial purposes).

The production classification:

According to the total capacity and the maximum volume of the tank - III b category

Transshipment terminal function

Rail/car transportation

Rail/car transportation

Tank farm capacity - 10 450 m3

JDLSAGROUP

94, Jan Smuts Avenue, Saxonwold, Johannesburg, 2196, Gauteng, SOUTH AFRICA

Office : +27 11 646 6700 – Mobile :+27 81 015 28 64

www. Jdlsagroup.com - info@jdlsagroup.com