Upload
others
View
18
Download
0
Embed Size (px)
Citation preview
P R E S S - A L L TO O L S
A money-saving tool.Both Press and Crimp jaws fit our new PressAll tool.
And both sets of jaws fit the CrimpAll tool, as well. No matter whichtool you own, you can simply buy a jaw set to double your tool’s capability.
Press connection
15” PressAll tool, 15” jaws and 15” crimping jaws shown.
Both the 15” and the 19” tool kits contain an adjustable wrench and jaw changing tool. Instructions for adjustment, jaw replacement and making Press connections are permanently labelled inside the lid.
5/8” Press jaws
3/4” Press jaws
1/2” Press jaws
3/8” Crimp jaws 1/2” Crimp jaws
5/8” Crimp jaws3/4” Crimp jaws
Crimp ring connection
© 2006 Watts Radiant, Inc. PressAll Tool Product Sheet LIT#PressToolProd-0906 Effective: 09/01/2006
Tools and AccessoriesRadiantPEX-AL Press Tools Order # Model # Pkg Wt UPC15” Manual Pressing Tool Kit w/ 1/2”, 5/8”, 3/4” jaws 81008140 RLPA-0612-K1 1 6 lb 84021308392219” Manual Pressing Tool Kit w/ 1/2”, 5/8”, 3/4”, 1” jaws 81008142 RLPA-0624-K2 1 8 lb 84021308393915” Press Tool, Extra Jaws Kit - 1/2”, 5/8”, 3/4” 81008426 RLPAJ19-K1 1 3 lb 84021308398419” Press Tool, Extra Jaws Kit - 1/2”, 5/8”, 3/4”, 1” 81008427 RLPAJ19-K2 1 3 lb 840213084035
RadiantPEX Crimp Tools Order # Model # Pkg Wt UPC15” CrimpAll Tool, Extra Jaws Kit - 3/8”, 1/2”, 5/8”, 3/4” 81009022 PCCRT-15K1 1 3 lb 840213084363
I N T E R C H A N G E A B L I L I T Y. B i g w o r d . S i m p l e c o n c e p t .Watts Radiant introduces one tool to fit two sets of interchangeable jaws.
Use your CrimpAll or PressAll tool to make both types of connection. Two types of pipe, two types of fittings, multiple sizes... one tool does them all!C o d e s , L i s t i n g s , a n d S t a n d a r d s .
RadiantPEX-AL tubing and Press fittings are manufactured in accordance withAmerican Standard Testing Methods (ASTM) F-1281, are tested and listed by the National Sanitation Foundation (NSF-PW Standards 14 and 61 and NSF-rfh), and carry the UPC certification mark, as approved by the International Association of Plumbing and Mechanical Officials (IAPMO).
®
PressAll Jaw Installation
1. 2. 3and4.
1. Cut a clean, square end to the tube.2. Use the Reamer tool to shape and prep the tubing.3. Make sure the Press sleeve is seated in the plastic
base of the connection with the view ports against the plastic base.
4. Slide the RadiantPEX-AL tubing onto the fitting until the tubing visibly fills the view port.
5. Place the Press fitting into one side of the jaws.6. Close the jaws firmly. Tool will stop automatically
when complete.7. See specific tool instruction sheet for
maintenance information.
Completed Press connection
Uncompleted Press connection
5. 6.
PressAll Tool Adjustment
Completing a PressAll Fitting
Set ScrewLoosen before each adjustment.Tighten after each adjustment.
Crescent Wrench (Included in kit)Adjustment ScrewTighten for more crimping force.Loosen for less crimping force.
Do NOT loosen
View Port
View PortReamer Tool
15” PressAll™ Tool Kit; 19” PressAll™ Tool Kit15” Kit Components
1/2" Jaws
3/4" Jaws
5/8" Jaws
Extra Jaw Retaining Screws and Lock Washers
Hex tool for changing jaws
15” PressAll Tool
PressAll Adjustment Tool
19” Kit Components
1/2" Jaws 3/4" Jaws 5/8" Jaws
Extra Jaw Retaining Screws and Lock Washers
19” PressAll Tool
1" Jaws
PressAll Adjustment Tool
Hex tool for jaw change out
© 2006 Watts Radiant, Inc. PressAll Tool Product Sheet LIT#PressToolProd-0906 Effective: 09/01/2006
In the United States
Watts Radiant, Inc.4500 Progress PlaceSpringfield, MO 65803
1-800-276-2419 toll-free417-864-6108 phone417-864-8161 faxwww.wattsradiant.com
In Canada
Watts Industries–Canada5435 North Service RoadBurlington, ON L7L 5H71-888-208-8927 toll-free phone905-332-4090 phone1-888-882-1979 toll-free fax905-332-7068 faxwww.wattscanada.ca