Upload
lisa-malone
View
220
Download
0
Embed Size (px)
DESCRIPTION
The Pressure Vessel Definition article provides you the definition and boundaries of pressurevessel based API code and ASME Code.Based on the ASME Code Section VIII, pressure vessels are containers for the containment ofpressure, either internal or external.This pressure may be obtained from an external source or by the application of heat from a director indirect source, or any combination thereof.The ASME Code is a construction code for pressure vesselsand contains mandatory requirements, specific prohibitions andnon-mandatory guidance for pressure vessel materials, design,fabrication, examination, inspection, testing, and certification.
Citation preview
12/22/2015 Pressure Vessel Definition
data:text/html;charset=utf-8,%3Ch1%20style%3D%22line-height%3A%201.3%3B%20margin%3A%201em%200px%200.25em%3B%20font-weight%3A%2… 1/2
Pressure Vessel Definition
The Pressure Vessel Definition article provides you the definition and boundaries of pressurevessel based API code and ASME Code.
Based on the ASME Code Section VIII, pressure vessels are containers for the containment ofpressure, either internal or external.
This pressure may be obtained from an external source or by the application of heat from a director indirect source, or any combination thereof.
The ASME Code is a construction code for pressure vesselsand contains mandatory requirements, specific prohibitions andnon-mandatory guidance for pressure vessel materials, design,fabrication, examination, inspection, testing, and certification.
Pressure Vessel Definition - Scope
These scopes are based ASME Code Sec VIII Div 1
The vessel with maximum allowable workingpressure(MAWP) higher than 15 psi
Inside diameter to be higher than 152 mm
No piping or piping component
No rotating or reciprocating Equipment
Not Water Vessel up to 300psi or 210°F
Not within the scope of other Sections
Also for gas fired double shell heat exchangers < 50 psi
Not Steam Boilers with direct firing
Not for Human Occupancy (PVHO)
Boundaries
The welding end of the first circumferential joint for welded connections
The first threaded joint for screwed connections
The face of the first flange for bolted, flanged connections
The first sealing surface for proprietary connections or fittings
12/22/2015 Pressure Vessel Definition
data:text/html;charset=utf-8,%3Ch1%20style%3D%22line-height%3A%201.3%3B%20margin%3A%201em%200px%200.25em%3B%20font-weight%3A%2… 2/2
Non pressure parts welded directly to a pressure retaining surface
Pressure retaining covers
Pressure relief devices
What is API Code Definition from Pressure Vessel ?
Contrary of ASME Code Sec VIII, which was developed forconstruction, the API STD 510 covers the in-service inspection,repair, alteration, and rerating activities for pressure vessels.
This inspection code applies to all refining and chemical processvessels that have been placed in service.
What is the API STD 510 coverage?
Vessels constructed in accordance with an applicableconstruction code
Vessels constructed without a construction code (non-code)—A vessel not fabricated to a recognized construction code andmeeting no known recognized standard
Vessels constructed and approved as jurisdictionally special based upon jurisdictionacceptance of particular design, fabrication, inspection, testing, and installation
Non-standard vessels—A vessel fabricated to a recognized construction code but has lost itsnameplate or stamping.