Upload
toshika-nehra
View
166
Download
0
Embed Size (px)
Citation preview
PREVENTIVE MAINTENANCE (BSS)
I did my training…..
Ericsson one of Sweden's largest companies, is a provider of telecommunication
and data communication systems, and related services, covering a range of
technologies, including especially mobile networks.
Ericsson is founded in 1876 by Lars Magnus Ericsson and incorporated on august
18,1918
Ericsson has offices and operations in more than 150 countries, with more than
20,000 staff in Sweden, and also significant presences in, for example, the UK,
India, Ireland, the USA, Finland, China, and Brazil.
Ericsson Networks is one of the largest telecommunications solutions suppliers in
the world.
About 1 billion people are connected through its networks.
The world's largest ever manual telephone exchange, serving 60,000 lines, was
installed by Ericsson in Moscow in 1916. Throughout the 1990s, Ericsson held a
35-40% market share of installed cellular telephone systems.
Ericsson is currently the world's largest mobile telecommunications equipment
vendor with a market share of 35%.
GNOC
Front Office
Back Office
Configuration
Management
Operation
Support
Fault Surveillan
ce
Preventive
Maintenance
FaultManagem
ent
Front office is the first level escalation. Front office
consist of many departments FS, PM,FM.
Surveillance team do live monitoring .They run commands on OSS,see alarm and raise TT forward them to fault management or raise work order to field team as required.
Preventive maintenance do health checkups. They run script and found deviations. Resolve above 80% TT and remaining are transferred to fault management and back office as required.
Fault management do first level troubleshooting and need to clear at least 80% of raised trouble ticket and remaining are forward to the back office and field team as required.
Back office is the second level TT not resolved by FO is transfer to it.
Configuration management plan and implement the new configure. New tariff is configure by IN and configuration related to BTS is done by BSS.
Operation support maintains the performance of the tools check the security of data system of ericsson.
What is PM? Preventive Maintenance, as the name suggests, includes
the activities that are meant for the prevention of avoidable outages.
Preventive Maintenance plays an important role in the performance of network as it detect the fault earlier and it is operated before being more challenging. Hence improve network quality.
BSS-Base Station Subsystem.
NSS-Network Surveillance System. OSS-Operation system. IN-Intelligent Network.
BSS NSS
OSS
IN
Domains
CUSTOMERS……
PAN INDIA Bharti(15 circle)
DELHI
ETISALAT MUMBAI & IDEA MUMBAI
WHAT PM do……
Taking regular health checkups of the nodes as per the health check list provided by Back Office.
Health checkups divided in two types:• Daily and fortnightly for BSS & NSS Node• Daily & Weekly health checkups for OSS.
Resolve above 80% of the TTs raised by themselves and remaining are being raised to the concerned teams
FAULT MANAGEM
ENT
PREVENTIVE MAINTENANCE WFM
.
IF CRITICAL
Transmission
/ hardware
related problem
TT related to OSS
BACK OFFICE
Health checkup sheet consist of activities in which deviations are found, commands and path for checking and solving the problem, standard output and deviated output.
For BSS they run commands on citrix tool using command handling application. If the output is different from the standard one than it is considered as deviation and a Trouble Ticket is raised for it. Most of Trouble ticket raised is solved on priority basis.
• These are those issues which have critical impact on the network service with high brunt on customer’s business and should be resolved within 4 hour.
CRITICAL
• These are those issues that have on impact on the network services or event which may lead to emergency.These have to be resolved within 10 hour .
MAJOR• These are those
issues that have minor impact on the network services. These have to be resolved within 32 hours otherwisw SLA breached.
MINOR
Advantages of preventive maintenance
Solves above 80% of the raised trouble ticket.
Maintain the better performance of cellular network.
Plays major role in load sharing.
Prevents major/critical issue before they appear and maintains a healthy network.
BASE STATION SUBSYSTEM
BTS: BASE TRANSCEIVER STATION
BSC: BASE STATION CONTROLLERTC: TRANSCODER
BASE TRANSCEIVER STATION (BTS)
• BTS has a set of Transceivers (TRXs) to communicate with mobiles in its area.
• One BTS covers one or more than one cell.• The capacity of a cell depends on number of
transceivers in the cell.• BTS is connected to the BSC through Abis
Interface which is 2Mbps.• BTS transmits and receives voice at 13kbps
over air interface to the mobiles.• BTS performs encoding ,decoding ,time
synchronization ,modulating and feeding signals to the antenna.
BASE STATION CONTROLLER (BSC)
Provides all the control functions and physical links between the MSC and BTS.
External Interfaces ‘Abis’ interface towards the BTS ‘A’ interface towards the MSC
BSC manages the radio resources for one or more BTSs.
It handles radio channel setup, frequency hopping, and handovers.
TRANSCODER (TC) FUNCTIONALITY
BTS
BSC MSC
13 kbps 16 kbps 16 kbps 64 kbps
TC
Base Station Subsystem performs following
functions…….
FREQUENCY REUSE
A3
C2B1
B3
A2C1
C3
B2A1
A3
C2B1
B3
A2C1
B3
A1C1
A1
A3A2
C3
B2A1
A3A3
C3
C1
B2A1B2A1
A2C1
B3
one group includes 3 sectors /site ,9 frequency which are
distributed to 3 sites. Every site owns 3 frequency.
LOCATION UPDATE
Location update is nothing but to update the present location of a Mobile Station (MS) into VLR (Visitor Location Register) of MSC.
There are two procedures: IMSI attach IMSI detach
HANDOVER
Between 1 and 2 – Inter BTS / Intra BSC
Between 1 and 3 – Inter BSC/ Intra
MSCBetween 1 and 4 – Inter MSC
2 types of HANDOVER…..SOFTThis type of
handover is used in CDMA technology.
In this type of handover, the MS first make one link with BTS then break the present link with BTS. So, “make before break” technology is used in soft handover.
HARDHard handover is
implemented in GSM. In this type of handover,
the MS first make break link with BTS A then make the present link with BTS B. So, “break before make” technology is used in hard handover.
The chances of call drop is more in hard handover than soft handover.
CONCLUSION
During this summer training, I built a good understanding of GSM technology that is being widely used by the mobile operators worldwide.
Except the technical learning, I have also learnt a lot about the core values that are being followed at Ericsson which are Respect, Professionalism and Perseverance.
As a part of BSS Preventive Maintenance team I have also seen the criticality of the faults that occur in network and learned the seriousness and discipline with which these faults should be handled.
Having done this training at ERICSSON INDIA PVT LTD., Gurgaon has added a lot my technical and personal skills
QUERIES??