Price book 1 - Zero International October 5, 2015 • Rev 10/15 Price book 1 115 2:[[ZXi^kZDXidWZg!'%& GZk#&%$&* This price list supersedes and cancels all previous price lists

Effective October 5, 2015 • Rev 10/15

Price book 1

Price Book 115Effective October 5, 2015 • Rev. 10/152

This price list supersedes and cancels all previous price lists. Prices shown are subject to change without notice.

Administrative OfficesAllegion Administrative Office11819 N. Pennsylvania St.Carmel, IN 46032allegion.com/us

Customer CareOur Customer Care Representatives are available for questions or assistance. You can reach the Zero International customer care team at 800-635-5335. You can contact Allegion customer care at 877-671-7011 (Press 1 for Sales Support | Press 2 for Product Support | Press 3 for SSC) or through the email addresses listed below:

Placing ordersYou can place orders with Allegion via the fax numbers or emails listed below:Zero International Fax#: 1-800-851-0000 Email: [email protected]

Sales Support

Carolinas (North Carolina, South Carolina, Virginia) [email protected]

Central (Arkansas, Illinois, Iowa, Kansas, Missouri, Nebraska, Oklahoma) [email protected]

Chicago (Illinois-Northern, Wisconsin) [email protected]

Florida [email protected]

Great Lakes (New York, Pennsylvania) [email protected]

Metro New York [email protected]

Request for Quote

Carolinas (North Carolina, South Carolina, Virginia) [email protected]

Central (Arkansas, Illinois, Iowa, Kansas, Missouri, Nebraska, Oklahoma) [email protected]

Chicago (Illinois-Northern, Wisconsin) [email protected]

Florida [email protected]

Great Lakes (New York, Pennsylvania) [email protected]

Metro New York [email protected]

Technical Product Support

Mechanical Locks/Keying Systems [email protected]

Michigan [email protected]

Mid Atlantic (Delaware, Maryland, New Jersey) [email protected]

Midwest (Indiana, Kentucky, Ohio, West Virginia) [email protected]

Mountain States (Colorado, Idaho, Montana, Nevada, Utah, Wyoming) [email protected]

New England (Connecticut, Main, Massachusetts, New Hampshire, Rhode Island, Vermont) [email protected]

North Central (Minnesota, North Dakota, South Dakota) [email protected]

Michigan [email protected]

Mid Atlantic (Delaware, Maryland, New Jersey) [email protected]

Midwest (Indiana, Kentucky, Ohio, West Virginia) [email protected]

Mountain States (Colorado, Idaho, Montana, Nevada, Utah, Wyoming) [email protected]

New England (Connecticut, Main, Massachusetts, New Hampshire, Rhode Island, Vermont) [email protected]

North Central (Minnesota, North Dakota, South Dakota) [email protected]

Northern California [email protected]

Northwest (Alaska, Oregon, Washington) [email protected]

South (Alabama, Georgia, Louisiana, Mississippi, Tennessee) [email protected]

Southern California (California-Southern, Hawaii) [email protected]

Southwest (Arizona, New Mexico) [email protected]

Texas [email protected]

Northern California [email protected]

Northwest (Alaska, Oregon, Washington) [email protected]

South (Alabama, Georgia, Louisiana, Mississippi, Tennessee) [email protected]

Southern California (California-Southern, Hawaii) [email protected]

Southwest (Arizona, New Mexico) [email protected]

Texas [email protected]

Mechanical Locks & Key SystemsFax#: 1-800-452-0665 Email: [email protected]

FastTrackFax#: 1-800-288-4242Email: [email protected]

Price Book 115Effective October 5, 2015 • Rev. 10/15 3

www.zerointernational.com

For latest additions, corrections, revisions,visit www.zerointernational.com

“When Nothing Else Is Good Enough For Long Enough”

MINIMUM CHARGE:

TERMS:

All claims for shortage or improper filling of order should be made within 10 days of receipt.

No returns accepted without prior authorization. Returns should be made within 30 days of authorization, freight prepaid, 45% restocking and handling charge will apply. Returns made after 30 days from date of delivery will receive a credit to their account to be applied to future orders. Nonstandard and specialty fabricated items are not returnable.

RETURNS:

$50.00 Net. Surcharge may apply. Material charged to next stock size.

20% If order is fabricated and packed.CANCELLATION CHARGE:

Payable in U.S. Currency.Without open credit – Bank check, American Express, Master Card , Visa and Discover.Material charged to next stock size.All prices are F.O.B. factory.

CLAIMS:

The following is made in lieu of all warranties, express or implied, including warranties ormerchantibility and fitness for a particular purpose: Purchase or use of this product constitutes an agreement with Seller and Manufacturer that, if this product proves to be defective or in any way unsuitable, Seller’s and Manufacturer’s limit of liability for all damages, including but not limited to incidental or consequential damages, and User’s or Purchaser’s exclusive remedy, regardless of legal theory, including theories of breach of warranty, negligence and strict liability, shall be to receive, at Seller’s or Manufacturer’s option, repair of the defective product, an equivalent quantity of replacement product or a refund of the purchase price.

WARRANTY:

GUARANTEE:Three years against defects in material or workmanship. Defective material will be replaced, howev-er, no back charges for damage incurred or work done thereon will be allowed.

ZERO INTERNATIONALM a i n O f f i c e A n d M a n u f a c t u r i n g

4 1 5 Co n co rd Ave n u e, B ro n x , N e w Yo r k 1 0 45 5 -1 0 0 4P h o n e : 7 1 8 - 5 8 5 -3 2 3 0 • 8 0 0 - 63 5 - 53 3 5 Fax : 7 1 8 -29 2-2243 • 8 0 0 - 8 5 1 - 0 0 0 0E - m a i l : Ze ro.Cu s to m e r. S u p p o r t @ a lle g i o n .co m

W e s t e r n D i s t r i b u t i o n C e n t e r

245 0 Lo o s e Ro a d , N . La s Ve ga s , N V 89 0 3 0P h o n e : 7 0 2- 63 3 - 9 3 0 0 • Fax : 8 6 6 - 5 8 5 -3 2 3 0 E - m a i l : Ze ro.Cu s to m e r. S u p p o r t @ a lle g i o n .co m

ZERO INTERNATIONAL

Since 1923

Supersedes all previous lists.Subject to change without notice.


TERMS & CONDITIONS

1. GENERAL/ACCEPTANCE. (a) This Agreement contains the only terms and conditions by which Company will quote and sell Deliverables to Customer; (b) The terms “purchase order” or “order” for the purposes of this Agreement include the term “request for quotation,” as appropriate; (c) This Agreement supersedes all pre-printed or boilerplate terms and conditions set forth in any purchase order issued by Customer; (d) No reference herein to Customer’s purchase order will in any way incorporate different or additional terms and conditions, all of which Company hereby expressly objects to; (e) ANY ACCEPTANCE BY COMPANY OF CUSTOMER’S PURCHASE ORDER IS EXPRESSLY CONDITIONED ON THE CUSTOMER’S ASSENT TO AND ACCEPTANCE OF THE TERMS AND CONDITIONS CONTAINED IN THIS AGREEMENT; (f) Company reserves the right to decline any order, in whole or in part, for any reason.

2. ORDERS. a. Order Processing. When Customer wishes to place an order for Deliverables, it will deliver to Company a purchase order. All such purchase orders must (i) be in a written format acceptable to Company, (ii) be legible, (iii) include a purchase order number, (iv) include Customer’s account number, invoice address, ship to address, shipping method, shipper’s letter of instruction for international shipments, part number, pricing, and designated contact information, (v) include, if applicable, any special configuration ID numbers, necessary programming information, special factory instructions, and requested specifications regarding a particular finish, handing, design, backset, or strike, and (vi) reference any applicable pricing discounts under an ongoing buying program or based on a written quote from Company, along with the applicable buying program number or quotation number. b. Minimum Orders. In the event the order value does not meet any required minimum net Deliverable value, Company may, at its sole discretion, (i) increase the quantity of items in the order to meet the minimum net Deliverable value requirement; (ii) apply a minimum order charge; (iii) reject the order, or (iv) waive the requirement, provided that the waiver of a requirement for one order shall not constitute a waiver of the requirement for any future orders. c. Acceptance of Purchase Orders. Company will endeavor to (i) acknowledge receipt of each purchase order issued in accordance with this Agreement, and (ii) notify Customer whether Company accepts or rejects the purchase order. If Company fails to accept or reject a purchase order within a reasonable time period, such failure to respond will be deemed a rejection of the entire order. d. Changes to Order/ Cancellation of Orders. Additional terms and conditions regarding order changes and cancellations are available on the Allegion customer website, WHICH TERMS ARE EXPRESSLY INCORPORATED HEREIN BY REFERENCE. Unless otherwise provided herein, Customer acknowledges that (i) requesting a Change Order may cause a delay in the scheduled shipment date, a longer lead time or result in a new scheduled shipment date; (ii) Orders may not be changed after 48 hours of Company’s order acknowledgment; (iii) After 48 hours of Company’s order acknowledgment, all changes to an accepted purchase order will be subject to a Change Order charge of 25% of the net Deliverable value, plus the cost of labor and fabrication or raw material that Company incurred prior to the receipt of the Change Order from Customer, or that may be required due to the Change Order; (iv) the requested change may result in additional charges for labor, fabrication, and raw material, and (v) if Customer cancels an order or portion of an order that includes Deliverables that have been manufactured and prepped for shipping, a 45% restocking fee will apply. Notwithstanding the foregoing, Customer cannot change or cancel credential orders, reader orders, biometrics orders or any non-cataloged, special, Custom or nonstandard items once they have been placed. All cancelled orders for a Non Recurring Expense (NRE), credential orders, reader orders, biometrics orders, and/or Custom orders will be subject to a cancellation charge of 100% of the acknowledged price. e. Add-ons. Add-on orders will not be accepted. Additions to orders will be entered as separate stand-alone orders and must qualify for all terms of sale, including discounts, on an individual basis. f. Fast-Track Orders. No changes or cancellations will be accepted on the 24-Hour Fast Track Program. For 3-day Fast Track orders, changes and cancellations may only be requested by Customer within 24 hours of Company’s order acknowledgment if the order has not shipped. For 5-Day Fast Track orders, changes and cancellations may only be requested by Customer if the order has not shipped and if the request is made to Company within 48 hours of Company’s order acknowledgment. Return Material Authorization (RMA) for Deliverables must be processed through Fast Track Customer Service. g. Steelcraft Orders. For all Steelcraft orders, changes or cancellations are allowed without penalty only if made within 48 hours of Company’s order acknowledgment, and provided that the order has not shipped. Some exceptions do apply – please consult the factory. Changes are not allowed on Rapid Program orders after the order has been entered and acknowledged. After 48 hours of Company’s order acknowledgment, all changes or cancellations are subject to a charge of 25% of the order. Unless otherwise specified by Company in writing, any changes to orders acknowledged by Company that affect the delivery date will be deemed a new order and will require acknowledgement by Company as provided in this Section. Additional products, features, terms and conditions regarding the Rapid Program are available on the Allegion customer website, WHICH TERMS ARE EXPRESSLY INCORPORATED HEREIN BY REFERENCE.

3. PRICES, INVOICES AND PAYMENT. a. Prices. The prices in Company’s Price Book are subject to change at any time, without notice to Customer. Company may charge Customer additional amounts if Customer requests special packing, marking, shipment, product modification, or engineering services. Oral prices specified by Company are null and void. Quote numbers must be referenced on Customer’s purchase order in order for the Company’s quoted pricing to apply. Orders that do not reference a quote number will receive buy program pricing or book net pricing. Quoted prices are for those specific products quoted for a specified job, and are subject to the Price Book in effect at the time the quote was issued by Company. b. Taxes. Prices do not include any present or future federal, state or local property, license, privilege, sales, use, excise, gross receipts or other like taxes or assessments which may result from transactions or any services performed in connection therewith. Any taxes, charges, or duties imposed by any governmental authority on the sale of Deliverables will be paid by Customer, in addition to the selling price specified by Company. c. Payment Terms. Company will deliver to Customer an invoice with each shipment of Deliverables hereunder. Customer will pay all invoiced amounts within 35 days of the invoice date, provided that Customer may take a 2% discount if Customer pays in cash and Company receives said payment within 20 days of the invoice date. For the avoidance of doubt, cash discounts do not apply to credit card payments. Customer will make all payments in United States dollars. Past due invoices will be subject to a late payment service charge of 1.5% per month on any overdue unpaid balance, equivalent to 18% per annum, or the maximum rate permitted by law, whichever is less. Customer shall reimburse Company for all costs of

collection, including, without limitation, reasonable attorneys’ fees, for any overdue amount owed by Customer to Company, and such collection costs shall also be subject to interest charges.

4. QUOTATIONS. a. Project Quotations. Project or new construction quotes are restricted to the specific project quoted for the quantities, finishes, and series of Deliverables referenced on the quote. Company reserves the right to require proof of sale of Company products for any quoted project. b. Stock Quotations. Deliverables fulfilling stock quotations may only be used for the following: i) Stocking of the Customer’s shelves for small, quick-turn, discretionary projects, or ii) Sale to a general contractor or installer for new construction. Stock quotations may not be used for any project containing any Company no-substitution, specified products. Deliverables purchased under Stock Quotations cannot be redistributed to other Customer branch locations or re-sold to other resellers or used for aftermarket sales, end-user annual contracts or sold over the counter to any walk in trade. c. General. All quotes are subject to this Agreement, unless otherwise specified by Company, and are subject to change at any time prior to Company’s acceptance of a purchase order referencing the applicable quote number. Company, its representatives and employees reserve the right, in their sole discretion and for any reason, to refuse a Customer’s request to quote a price other than the standard list price, regardless of whether Company or its representatives or employees have previously quoted discounted prices to the Customer on some or all of its orders. Customer’s failure to comply with this Section 4 will be considered a material breach of this Agreement, and will entitle Company to immediately terminate any purchase orders and/or Customer’s ability to distribute Company’s products.

5. SECURITY INTEREST. Customer grants Company, and Company retains, a purchase money security interest and lien on any and all of Customer’s rights, title and interest in each Deliverable sold by Company to Customer, wherever located, until the invoice for the applicable Deliverable(s) is paid in full, including any late charges and costs of collection. Customer authorizes Company to, and will assist Company in, taking all necessary steps to perfect and maintain Company’s interest in such Deliverables.

6. CREDIT TERMS. Unless Customer pre-pays all of its purchase orders in advance, its purchase orders will be subject to the credit limit and other terms of credit (“Credit Terms”) set forth in Company’s credit application, which Credit Terms Customer acknowledges are subject to change by Company at any time. Company reserves the right to request payment in advance of shipment or any order or to request adequate assurances for Customer’s payment of an order and may withhold or stop shipment, without any liability to Company, until Customer submits payment or adequate assurance of payment.

7. RESALE OF DELIVERABLES. Customer agrees and warrants that it will offer Company products in support of Company-written specifications and will maintain sufficient inventory to adequately support End Users, installers, and/or general contractors’ needs. Company may implement an MSRP or a resale pricing programs at any time in its sole discretion. Failure to comply with such program(s) will be considered a material breach of this Agreement, and will entitle Company to immediately terminate any purchase order and/or Customer’s ability to distribute Company’s products. Customer shall, at its own expense, gain and maintain sufficient knowledge of the industry and products competitive with Deliverables so as to be able to (a) explain in detail to End Users, installers, and/or general contractors the differences between the Deliverables and competing products, (b) ensure that an adequate number of trained, capable and qualified technical personnel with sufficient knowledge of the Deliverables and who have obtained all necessary licenses and permits are available to assist End Users, installers, and/or general contractors, and (c) respond to such End Users, installers, and/or general contractors with respect to the general operation and use of the Deliverables including, but not limited to, (1) acting as a liaison between the End Users, installers and/or general contractors and Company in matters requiring Company participation, (2) providing general product information and configuration support on standard protocols and features, (3) collecting relevant technical problem identification information, and (4) posting and distributing any warranty information concerning the Products in accordance with Company’s instructions. Customer is responsible for all service and support resulting from the re-sale of any Deliverable to End-Users, installers and/or general contractors, examples of which may include, but are not limited to, support activities such as installation, initialization, software set-up, training, trouble-shooting, technical support and field service. In the event Customer is unwilling or unable to perform said support activities, Company reserves the right to recover from Customer any and all expenses incurred by Company to resolve the afore-mentioned End-User, installer and/or general contractor issues. Technical product training is recommended for Customer in order to fully service and support Deliverables purchased from Company that are resold to End-Users, installers and/or general contractors.

8. DEFAULT. If Customer is in default of payment or otherwise with respect to any purchase order or other contract with Company, Company shall have the right, in addition to all other legal remedies and without prejudice to any of its right hereunder, to defer further shipments under that or any other purchase order until such default is corrected and to declare all outstanding bills of Customer to be immediately due and payable.

9. INSPECTION AND DELIVERY. a. Inspection. Customer will inspect all Deliverables immediately after receiving them. Customer will be deemed to have accepted the Deliverables unless Customer notifies Company in writing of any nonconformance within 10 days of delivery and provides Company written evidence reasonably documenting that nonconformance. Inspection of Deliverables at Company’s facility is not permitted. b. Delivery. Delivery schedules for Deliverables are based upon current production capacities, material or component availability, and inventory, and may be changed by Company as conditions require. Delivery schedules for services are based upon Company’s prompt receipt of, and prompt access to, Customer’s equipment and all information necessary to complete the services. In no event will any delivery date be construed as falling within the meaning of “time is of the essence.” Partial delivery shall be accepted by Customer and paid for at the price and on the terms stated herein. Any partial delivery shall constitute a separate sale, and payment shall be separately made when due. If any part of a delivery hereunder is not delivered by Company in accordance with Customer’s purchase order, this Agreement shall not be affected thereby.

10. TITLE & RISK OF LOSS. Unless otherwise specified by Company, (i) where the Customer is located in the United States, all Deliverables will be sold “Uniform Commercial Code, FOB Origin, Company’s factory”; and (ii) where the Customer is located outside of the United

Allegion General Terms and Conditions of Sale and Service


TERMS & CONDITIONSStates, all Products will be sold “Ex-works, Company’s factory (Incoterms 2010).” In either instance, title and risk of loss will pass to Customer upon delivery to the carrier at Company’s factory, provided, however, as set forth herein, Company shall retain a security interest in the Deliverables until full payment has been made therefore, and Customer agrees, upon request, to do all things and acts necessary to protect Company’s interest by adequately insuring the Deliverables against loss or damage from any cause and to have Company named as an additional insured. Customer will promptly provide Company with a copy of the relevant certificate of insurance upon Company’s request.

11. SHIPPING. a. Freight Charges. Company will ship all Deliverables in accordance with Company’s freight shipment guidelines, which are set forth on the My Allegion Portal (“Freight Shipping Guidelines”), WHICH TERMS ARE EXPRESSLY INCORPORATED HEREIN. b. Rush Charges. Expedited order options are available as set forth in Company’s freight shipping guidelines. c. Packing and Marking. Company will pack, mark, and ship Deliverables according to its standard procedures for shipment, unless the parties agree, in writing, that Company will comply with any special instructions provided by Customer. Special instructions may result in an increased price. d. International Shipments. For all international orders, a Shipper’s letter of instruction must be submitted in writing with the order. Failure to do so will result in the order being rejected. Complete adherence to this order requirement will be strictly enforced. Company will not be held liable for any charges resulting from delays due to lack of complete required information being supplied. e. Once received by the Company, a Customer purchase order can only be combined with any other order or combined with Company brands (to qualify for freight allowances) in accordance with the Company’s freight shipment guidelines, which are set forth on the My Allegion Portal (“Freight Shipping Guidelines”).

12. CLAIMS. All claims must be submitted in writing to Company as follows: (i) All claims for prices must be submitted within thirty (30) days from the date of invoice; (ii) All claims regarding Deliverable quantity or incorrect orders must be submitted within ten (10) days from the date of delivery; (iii) All claims for damage to Deliverables (while in the care, custody, and control of Company) must be submitted within thirty (30) days from the date of invoice; (iv) All claims for loss or damage to Deliverables while in the care, custody, and/or control of a carrier will be the responsibility of Customer, unless otherwise agreed by the parties.

13. PRODUCT CHANGES. Company’s product policy is one of ongoing update and revision, and accordingly, Company reserves the right to change, without notice, the design of, or the process of manufacturing, the Deliverables covered by this Agreement.

14. PRODUCT USAGE LIMITATION. Customer agrees: (i) not to sell or use a Deliverable in any manner contrary to the manner in which the Deliverable is intended to be used; and/or (ii) not to modify the design of any Deliverable for use with another product without the prior written consent of Company.

15. PRODUCT RETURNS. Unless otherwise agreed by the parties in writing, Deliverables that are correctly furnished by Company per the purchase order may not be returned unless Customer receives written authorization from Company. If returns are authorized by Company, a return merchandise authorization (“RMA”) number must be provided by Company. Deliverables identified under such RMA must be returned to Company within 90 days of issuance of the RMA. Such RMA number and any accompanying RMA documents, the original invoice number, and a written explanation for the return must be included with the returned Deliverables in order for Company to inspect and approve a credit for the return. For warranty returns, a credit in the amount of the original purchase price will only be issued if, after Company’s receipt and inspection of the returned Deliverables, Company confirms, in its sole discretion, the defect is valid and approves the return. For non-warranty returns/convenience returns, in the event Company approves such a return, in its sole discretion, the following shall apply: (a) the total amount of Deliverables requested to be returned shall be a minimum of $250.00; (b) a credit will be made to Customer’s account in the amount of the original purchase price less freight and a handling charge of 45% of the net material on the original invoice; and (c) only Deliverables that are new, current, standard, non-obsolete, non-specially manufactured, unused, in their original condition as at the time of sale by Company to Customer, in their original packaging and in Customer’s inventory less than 180 days from the date of shipment by the Company, and not ordered as part of a master key solution may be considered by Company for return. Such credit will only be issued if, after Company’s receipt and inspection of Deliverables, Company approves the return. The amount of final credit will be determined upon receipt at the factory and following Company’s inspection and analysis of the condition of the returned material. Company retains the right to deny credit to anyone for any reason.

16. CONFIDENTIAL INFORMATION. a. Non-Use And Non-Disclosure. Customer shall not use the Confidential Information of the Company except for the purpose of performing its obligations under this Agreement or exercising the rights granted herein (the “Purpose”). Customer shall protect Confidential Information of the Company from disclosure and unauthorized use in the same manner that it protects its own Confidential Information, but in no event shall such standard of care be less than reasonable care. Customer may disclose Confidential Information of the Company only to its employees who require such information for the Purpose and who are subject to confidentiality obligations at least as protective as those set forth herein. b. Proprietary Information and Advice. (a) All designs, data, and specifications provided by Company are proprietary and may not be disclosed or reused by Customer without the prior written consent of Company; (b) Company assumes no obligation or liability for any advice given by Company, the results obtained, or damages incurred as a result of such advice, and all such advice is given and accepted at Customer’s risk. c. Return. Upon the termination or expiration of a purchase order or this Agreement or upon the request of the Company, the Customer agrees to end all further use of, to immediately return to the Company the original version of, and to delete or destroy all copies of, any and all Confidential Information of the Company.

17. TRADEMARKS. Except as agreed to by Company in writing, Customer agrees not to (a) use Company’s name in any form of publicity; or (b) use, create, register or market, directly or indirectly, in whole or in part, Company’s names, logos, brands, or any other trademarks, or names that are now or may hereafter be owned by Company, as part of Customer’s corporate or business name, as part of an internet domain name, uniform resource locator (URL), or in any way connected with Customer’s business, trade address or other designations. Upon termination of this Agreement or upon the request of company for any reason, any use of Company’s trademarks or names will be immediately discontinued.

18. LIMITED WARRANTY.COMPANY MAKES NO OTHER WARRANTIES EXCEPT THOSE STATED IN COMPANY’S LIMITED WARRANTY IN EFFECT ON THE DATE COMPANY ACCEPTS EACH APPLICABLE PURCHASE ORDER (“LIMITED WARRANTY”). THE LIMITED WARRANTY MAY BE FOUND IN THE APPLICABLE PRICE BOOK AND ON THE ALLEGION CUSTOMER WEBSITE, WHICH TERMS ARE EXPRESSLY INCORPORATED HEREIN BY REFERENCE. COMPANY WILL MAIL CUSTOMER A HARD COPY OF THIS WARRANTY UPON CUSTOMER’S WRITTEN REQUEST. IN THE EVENT THAT CERTAIN DELIVERABLE WARRANTIES ARE NOT FURNISHED BY THE COMPANY TO CUSTOMER, COMPANY WARRANTS ONLY TO CUSTOMER THAT THE DELIVERABLES WILL BE FREE FROM DEFECTS IN MATERIAL AND WORKMANSHIP FOR A PERIOD OF 12 MONTHS FROM THE DATE OF SHIPMENT OF THE DELIVERABLES. COMPANY’S SOLE OBLIGATION UNDER THIS WARRANTY IS LIMITED TO REPAIRING OR REPLACING, AT COMPANY’S OPTION, THE DEFECTIVE DELIVERABLE, PROVIDED WRITTEN NOTICE OF THE DEFECT OR NONCONFORMANCE IS PROVIDED BY CUSTOMER WITHIN 30 DAYS OF DISCOVERY OF THE DEFECT OR NONCONFORMANCE. COMPANY DISCLAIMS ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, WITH RESPECT TO THE DELIVERABLES, INCLUDING BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES OF NON-INFRINGEMENT, MERCHANTABILITY, OR FITNESS FOR A PARTICULAR PURPOSE. a. Exclusions. The provisions of this Limited Warranty do not apply to Deliverables that: (A) are not the proper size for the application; (B) are not installed in accordance with Company’s published installation instructions; (C) are installed with improper or incorrect parts and/or are used for purposes for which they are not designed or intended; (D) have been repaired or altered without the Company’s prior written consent; (E) have been subjected to misuse, abuse, negligence or accident; (F) have been improperly stored, installed, maintained or operated; (G) have been used in violation of written instructions provided by Company to Customer; (H) have been subjected to improper temperature, humidity, or other environmental conditions, or (I) have been affected by normal wear and tear. In addition, the provisions of this Limited Warranty do not apply to any defects or issues with the design or performance of equipment or products not manufactured by Company, nor does it apply to any code compliance or permit requirements for the assembly, installation, erection or construction of any goods. Company is not responsible for loss or damage resulting from use of Deliverables in conjunction with parts or systems not manufactured by Company. Accessories or products furnished by the Company, but manufactured by others, shall carry whatever warranty the manufacturers have conveyed to the Company and which can be passed to Customer. b. Services. Company warrants that its services will be free from defects in material and workmanship for a period of 12 months from the date of completion of the particular items of service. Company’s sole obligation under this service warranty is limited to repair or reperformance, at its option of the service, provided however, if repair or reperformance is either impractical or impossible, the Company will refund to Customer that portion of the price paid to Company for any defective service, provided written notice of the defect or nonconformance is provided by Customer within 30 days of discovery of the nonconformance. c. Notification. Customer agrees to immediately notify Company in writing if any claim is made against Customer for any damages caused by any modules, parts, products, service or other Deliverables which may be the direct result of any defect in the manufacture of such aforementioned products. Customer agrees to cooperate with Company and its counsel in the defense of such claim and Customer agrees not to settle such claim without Company’s written consent. If Customer fails to notify Company of such claim or fails to cooperate in such defense as aforesaid, then Company shall be discharged from any obligations under this Section and shall have no further liability to Customer. d. Exceptions. The following costs and expenses are not covered by the provisions of these limited warranties: (i) labor costs for the removal and reinstallation of Deliverables or other manufacturer’s products; (ii) shipping and freight expenses required to return Deliverables to Company; (iii) normal maintenance; and (iv) economic losses. In addition, the provisions of this warranty are not applicable to anything other than defects in Company’s material (products only) or workmanship.

19. LIMITATION OF REMEDIES.CUSTOMER’S EXCLUSIVE AND SOLE REMEDY ON ACCOUNT OF, OR IN RESPECT OF, THE FURNISHING OF NON-CONFORMING DELIVERABLES, SHALL BE TO (A) SECURE REPAIR OR REPLACEMENT OF THE PRODUCTS; OR (B) SECURE REPAIR OR RE-PERFORMANCE OF THE SERVICES OR TO OBTAIN A REFUND OF THE PRICE PAID FOR THE DEFECTIVE SERVICE, ALL AT COMPANY’S OPTION. IN NO EVENT WILL THE COMPANY’S MAXIMUM LIABILITY EXCEED THE SELLING PRICE FOR THE DELIVERABLE. THE WARRANTY, OBLIGATIONS AND LIABILITIES OF COMPANY (INCLUDING ITS SUPPLIERS) AND THE RIGHTS AND REMEDIES OF CUSTOMER ARE EXCLUSIVE AND ARE IN LIEU OF AND CUSTOMER HEREBY WAIVES AND RELEASES ALL OTHER WARRANTIES, OBLIGATIONS, REPRESENTATIONS OR LIABILITIES EXPRESS OR IMPLIED ARISING BY LAW, IN CONTRACT, TORT (INCLUDING NEGLIGENCE OR STRICT LIABILITY) OR OTHERWISE, INCLUDING BUT NOT LIMITED TO (I) ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR ANY WARRANTY IMPLIED THROUGH COURSE OF PERFORMANCE, COURSE OF DEALING, OR USAGE OF TRADE OR (II) CLAIMS ARISING OUT OF THE NEGLIGENCE OF COMPANY OR COMPANY’S SUPPLIERS OR (III) ANY OTHER CLAIM ARISING OUT OF, CONNECTED WITH, OR RESULTING FROM THE PERFORMANCE OF COMPANY OR FROM THE DESIGN, MANUFACTURE, SALE, REPAIR, LEASE OR USE OF THE DELIVERABLE, OR ANY COMPONENT THEREOF, DELIVERED OR RENDERED HEREUNDER OR OTHERWISE.

20. INDEMNIFICATION AND LIMITATION OF LIABILITY. a. Customer shall indemnify, defend and hold Company, and its officers, directors, employees, customers, Affiliates, suppliers, users and agents, (collectively the “Indemnitees”) harmless from and against any and all damages, claims, losses, expenses, costs, obligations, liabilities, including without limiting the generality of the foregoing, liabilities for court costs and attorneys’ fees,


TERMS & CONDITIONSsuffered directly or indirectly by an Indemnitee by reason of, or arising out of any injury, death or loss to any person, or injury to any property (collectively, “Damages”), received or sustained by any person(s) or property, arising out of, occasioned by, attributable or related to i) any breach of any representation or warranty made by Customer, its officers, directors, employees, affiliates, users, agents, representatives or customers to Company or any third party, (ii) any failure by Customer to perform or fulfill any of its covenants, acts and/or omissions to Company or to any third party, or (iii) any litigation, proceeding or claim by any third party relating in any way to the obligations of Customer and/or the Deliverables sold by Company to Customer hereunder. Customer shall not consummate any settlement of any indemnified claim without the Indemnitees’ prior written consent. Customer’s obligation to indemnify Indemnitees will continue in full force and effect notwithstanding the termination or expiration of any order under this Agreement. In any claim against an Indemnitee by an employee of Customer or any subcontractor or anyone directly or indirectly employed by any of them or anyone for whose acts they may be liable, the indemnification obligations set forth in this Section shall not be limited in any way by or for Customer or any subcontractor under any applicable worker’s compensation act, disability or other employee benefit act, or insurance coverage. This provision shall survive termination of any order or Agreement. IN NO EVENT WILL COMPANY, ITS OFFICERS, DIRECTORS, EMPLOYEES, CUSTOMERS, AFFILIATES, USERS AND AGENTS, (NOR COMPANY’S SUPPLIERS) BE LIABLE FOR ANY INCIDENTAL, CONSEQUENTIAL, INDIRECT, SPECIAL, OR PUNITIVE DAMAGES OF ANY KIND OR NATURE UNDER ANY CIRCUMSTANCES INCLUDING, BUT NOT LIMITED TO, LOSS OF USE OF THE PRODUCTS, SERVICE INTERRUPTION, LOSS OF PROFITS, LOSS OF REVENUE, LOSS OF INTEREST, LOST GOODWILL, LOSS OF DATA, WORK STOPPAGE, IMPAIRMENT OF OTHER GOODS, LOSS BY REASON OF SHUTDOWN OR NON-OPERATION, INCREASED EXPENSES OF OPERATION, OR CLAIMS OF CUSTOMER’S CUSTOMERS, OR ANY OTHER LOSSES OR DAMAGES ARISING OUT OF ANY LACK OR LOSS OF USE OF THE DELIVERABLES WHETHER BASED ON CONTRACT, WARRANTY, TORT (INCLUDING, BUT NOT LIMITED TO, STRICT LIABILITY OR NEGLIGENCE), PATENT INFRINGEMENT, OR OTHERWISE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. b) INTELLECTUAL PROPERTY INDEMNITY. Company makes no representation or warranty to the Customer that the Deliverables shall not infringe any intellectual property rights including, without limitations, claims arising from patent, copyright, trademark, trade secret, or other intellectual property infringement. Customer agrees to hold Company harmless from and defend the Company against any such claim of intellectual property infringement, including any Damages resulting from that claim, the cost of complying with any preliminary or permanent injunction, and all other costs of defense (including the attorneys’ fees and costs), in connection with the foregoing.c) To the extent that applicable law does not permit any limitations set out in this Agreement, such limitation shall not be applied or invoked. Nothing in this Agreement will be interpreted to disclaim liability of Company or the Indemnitees for gross negligence or willful misconduct. The limitations of remedy and liability herein shall not be interpreted to affect Company’s obligations, if any, for claims for (i) property damage, (ii) personal injury, or (iii) wrongful death asserted by persons who are not parties to or beneficiaries of this Agreement. Further, the limitations of remedy and liability herein shall not be interpreted to limit Company’s or Customer’s right, if permitted by applicable law, to assert a claim for contribution among joint tortfeasors in connection with a claim by a person who is not a party to this Agreement.

21. CERTIFICATIONS. Certification of Deliverables for compliance with UL and ANSI standards are tested and performed by third-party independent laboratories. Any field modification or alteration of certified Deliverables will void certification and Company is not liable to Customer to certify any modified or altered Deliverable.

22. TERM FOR CLAIMS. NO ACTION ARISING OUT OF ANY CLAIMED BREACH OF THIS AGREEMENT BY COMPANY MAY BE BROUGHT BY CUSTOMER MORE THAN ONE (1) YEAR AFTER THE CAUSE OF ACTION HAS ARISEN.

23. CONSUMER PRODUCTSWITH RESPECT TO “CONSUMER PRODUCTS” AS DEFINED UNDER THE MAGNUSON-MOSS WARRANTY ACT (“MMWA”), THE FOLLOWING STATEMENTS ARE MADE. (A) SOME STATES OR LOCAL LAWS DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU; (B) IF ANY IMPLIED WARRANTY IS PROVIDED UNDER THE MMWA, IT IS LIMITED TO THE DURATION OF THE WARRANTY PROVIDED IN SECTION 18 ABOVE. (C) SOME STATES OR LOCAL LAWS DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU; AND (D) THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS AND YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE OR LOCATION TO LOCATION.

24. FORCE MAJEURE/EXCUSABLE DELAY. Any delay or failure of Company to perform its obligations hereunder will be excused to the extent that it is caused by an event or occurrence beyond Company’s control such as, by way of example and not by way of limitation, acts of God, acts by any governmental authority (whether valid or invalid), governmental laws and regulations not presently in effect, fires, floods, windstorms, explosions, riots, natural disasters, wars, sabotage, accidents, labor problems (including, without limitation, lockouts, strikes, and slowdowns) at Company’s facility, its source plant or their suppliers, inability to obtain power, material, labor equipment, or transportation, or court injunction or order. The delivery date will be extended for a time equal to that of the delay and the schedule for Company’s performance will be deemed adjusted to that effect.

25. ENTIRE AGREEMENT AND AMENDMENT. This Agreement, together with the attachments, exhibits, webpages, or supplements specifically referenced and incorporated herein, constitute the entire agreement between Company and Customer with respect to the matters contained herein and supersede all previous communications, representations, or agreements, either oral or written between Company and Customer. No agreement or understanding varying or expanding this Agreement will be binding upon either party unless it is in writing and signed by a duly authorized representative of each party hereto.

26. CONFLICTS. In the event of any conflict or inconsistency between the terms of any agreement, or any part of an agreement or the various documents (including, but not limited to, electronic documents) between Company and Customer, unless the parties agree otherwise in writing, the various components of the agreements shall be given the following precedence (in descending order of precedence): a) any master agreement or long term agreement between Company and Customer; b) any specific terms, conditions and/or warranties of the individual products or Deliverables; c) the terms and conditions of this Agreement, and d) any purchase order.

27. UNSATISFACTORY CREDIT/TERMINATION FOR INSOLVENCY OR DEFAULT. Customer shall furnish Company with statements evidencing Customer’s financial condition as Company may, from time to time, reasonably request, and shall notify Company immediately of any and all events that may have a material adverse effect on Customer’s business or financial condition. If Company determines, in its sole discretion, that Customer’s financial condition or creditworthiness is inadequate or unsatisfactory, then in addition to Company’s other rights, Company may without liability or penalty, take any of the following actions: (i) modify the payment terms for any outstanding and/or future purchases; (ii) cancel any previously accepted orders; (iii) delay any further shipment of Deliverables to Customer; or (iv) any combination of the above.

Company may immediately terminate an order from Customer by giving written notice to Customer in the event of the happening of any of the following or any other comparable event: (i) insolvency of the Customer; (ii) filing of a petition in bankruptcy by or against the Customer; (iii) appointment of a receiver or trustee for the Customer; (iv) execution of an assignment for the benefit of creditors by the Customer, all of which will allow Company to demand reclamation of all affected orders; (v) Customer ceases or threatens to cease to trade; (vi) Company determines that Customer does not meet or no longer meets the credit requirements of Company or Customer’s credit account is closed; (vii) any Customer violation of law, specifically including, without limitation, those laws set forth in this Agreement.

In the event of termination in accordance with this section, Company will not be obligated to accept any existing or additional orders from Customer and Company will be released from its obligation to deliver under orders accepted prior to such termination. The rejection or termination of any order by Company will not entitle Customer to any termination or severance compensation, or to any payment in respect to any goodwill established by Customer, or render Company liable for damages on account of the loss of prospective profits, or on account of any loss, expenditure, investment or obligation incurred or made by Customer.

No action taken under this Section 27 by Company (nor any failure of Company to act under this Section 27) will constitute a waiver by Company of any of its rights to enforce Customer’s obligations, including the obligation of Customer to make payments as required under this Agreement. Upon termination of any order, all amounts owed by Customer to Company will become immediately due and payable, whether or not otherwise then due or payable.

28. CREDIT RISK ON RESALE OF DELIVERABLES. Customer is responsible for all credit risks with respect to, and for collecting payment for, all Deliverables sold to third parties (including End Users, installers, and/or general contractors) whether or not Customer has made full payment to Company for such Deliverables. The inability of Customer to collect payment for any Deliverable shall not affect Customer’s obligation to pay Company for any Deliverable.

29. GOVERNING LAW; VENUE; AND EXPENSES. Any dispute or claim relating to this Agreement shall be governed by and construed according to the laws of the State of Indiana (excluding its conflict of laws principles); and not by the provisions of the 1980 United Nations Convention on the International Sale of Goods. Any disputes or claims shall be instituted and maintained in the courts of the State of Indiana. Customer consents to the exercise of jurisdiction over it by such courts and agrees that Indiana is not an inconvenient forum for any action arising from or relating to this Agreement. Customer agrees to pay for all expenses (including, but not limited to, collection costs, court costs and attorneys’ fees) incurred by Company in enforcing the obligations of Customer under this Agreement.

30. RELATIONSHIP OF THE PARTIES. Nothing in this Agreement or any other document creates an employment, partnership, joint venture, or agency relationship between Company and Customer, including that of franchisee/franchisor. No party will have any power or authority to enter into any commitment on behalf of or otherwise bind the any other party on any matter. No employee of Customer will be deemed to be an employee of Company. If any provision of this Agreement is deemed to create a franchise relationship or business opportunity between the Parties, then Company may terminate any purchase order or this Agreement or the Parties shall negotiate in good faith to modify this Agreement so as to effect the original intent of the Parties as closely as possible in a mutually acceptable manner in order that the transactions contemplated hereby are consummated as a reseller agreement and not a franchise or business opportunity agreement.

31. SETOFF. Customer does not have the right to setoff or to back charge against any amounts which become payable to Company under this Agreement or otherwise. Company will not accept responsibility for backcharges for the cost of material or labor by Customer or any third party.

32. ELECTRONIC COMMUNICATIONS AND ELECTRONIC SIGNATURES. Both parties expressly agree to electronic transactions and acknowledge that documents they sign electronically will bind them to the same extent as a paper signature. Customer represents and warrants to Company that only employees authorized to bind Customer legally shall electronically sign any document under this Agreement. Customer shall comply with any method of electronic communication/payment processing specified by Company, including electronic funds transfer, pay-on-receipt processes/systems, order transmission, releases, electronic signature, and electronic communication systems, including, without limitation, the use of electronic data interchange (“EDI”) portals. Notwithstanding the foregoing, e-mails, even those containing a signature block of one of Company’s representatives, shall not constitute a signed writing.

33. COMPLIANCE WITH APPLICABLE LAWS. a. General. Company and Customer will comply with all applicable federal, state and municipal laws, regulations, codes, ordinances and orders that pertain to the Deliverables, including but not limited to full compliance with any applicable provisions of The Health Insurance Portability and Accountability Act. Where the Customer is located outside the United States, or where the customer intends to ship the product outside the United States, the Customer shall be responsible for compliance with all U.S. export laws, and for filing all U.S. Electronic Export Information, as applicable. b. The Customer acknowledges and agrees that: (i) it shall not violate applicable laws and regulations in performing its duties under this Agreement; (ii) it does not and shall not engage in any conduct that shall violate any applicable anti-bribery or anti-corruption laws or regulations; (iii) it (and its owners, officers, directors, employees and agents) shall not pay, offer, promise or authorize the payment of, either directly or indirectly, anything of value (including but not limited to cash, gifts and entertainment) to (a) any government official or employee of any government; (b) any official or employee of any department, agency, or


TERMS & CONDITIONSinstrumentality of a government; (c) any employee of any corporation or entity owned or controlled by a government; (d) any family member of such officials or employees; (e) any political party, party official, or political candidate; or (f) any other persons, owners, officers, directors, employees and agents of any corporation or entity; to improperly or illegally assist in obtaining or retaining business (including but not limited to any contracts, avoidance of duties or reduction of tariffs, reduction of taxes or to obtain money owed, or to obtain regulatory approval) or for the purpose of causing, soliciting or inducing the sale and purchase of the Deliverables by any party, and (iv) it has full knowledge of and will comply with the Company’s Code of Conduct for Business Partners as set forth on the Allegion customer website, WHICH IS HEREBY INCORPORATED BY REFERENCE. c. The Customer shall indemnify and hold the Company harmless from any claim, demand, expense or cost arising from any breach of this Article. d. The Customer shall permit the Company to conduct an audit or review of the Customer’s financial books and records and business operations at such other times that the Company considers it necessary to confirm compliance with this provision. Such audit may be conducted by representatives of the Company or, at the Company’s sole discretion, by a certified public accounting firm selected by the Company. The Customer shall cooperate with any inquiries from the Company’s Ethics & Compliance Group. e. A violation of this provision constitutes a material breach of this Agreement and the Company may terminate any purchase order or this Agreement immediately, with no opportunity to cure, in accordance with Section 27 of this Agreement.f. Notwithstanding the foregoing provisions of this Section 33, (i) Company is not responsible for obtaining or maintaining any permits for the performance of services or the verification or compliance with any code requirements relative to the performance of services, (ii) to the extent any sale of Deliverables pursuant to this Agreement may require approval of the U.S. Government, Company’s obligations under this Agreement are conditioned upon the grant of such approval and upon compliance by Customer with any restrictions imposed by the U.S. Government in connection with such approval, and (iii) in the event the Deliverables are to be used in a nuclear facility, the Customer shall, prior to such use, arrange for insurance or governmental indemnity protecting Company against liability. The Customer hereby releases and agrees to indemnify Company and its suppliers for any nuclear damage including, but not limited to, loss of use, in any manner arising out of the nuclear incident, whether alleged to be due, in whole or in part by Company or its suppliers. g. No Inducements. Each party represents to each other that neither it nor any person acting on its behalf has, in contravention of any applicable law, given or offered to give or will give or offer to give, any sum of money or other material consideration to any person, directly or indirectly, as an inducement to obtain business hereunder or to influence the granting of licenses or other governmental permissions to enter into this Agreement or perform obligations hereunder. h. Equal Employment Opportunity. Company is a U.S. federal contractor that complies with Executive Order 11246, as amended, and applicable regulations in 41 CFR Parts 60-1 through 60-60, 29 U.S.C. § 793 and applicable regulations in 41 CFR § 60-741; and 38 U.S.C. § 4212 and applicable regulations in 41 CFR Part 60-250 and 60-300. THE FOLLOWING PROVISIONS ARE INCORPORATED HEREIN BY REFERENCE: Executive Order 11246, as amended by Executive Order 13672, and 41 CFR § 60-4.3(a); Executive Order 11701 and 41 CFR §§ 60-250.5(a), 60-300.5; Executive Order 11758 and 41 CFR § 60-741.5(a); U.S. immigration laws, including the L-1 Visa Reform Act of 2004 and the H-1B Visa Reform Act of 2004; and Executive Order 13496. i. Ethical Business Conduct. Customer shall adopt and comply with Company’s Business Partner Code of Conduct which is EXPRESSLY INCORPORATED HEREIN BY REFERENCE.

34. REPRESENTATIONS AND WARRANTIES. Customer represents, warrants and covenants to Company that: (a) it has the right, power, and authority to enter into this Agreement and fully perform its obligations hereunder; (b) it has all necessary rights in and to its respective Content and Marks for use within the scope of this Agreement, including the licenses granted herein; and (c) it complies, and at all times shall comply, with all laws, rules, and regulations in effect that are applicable to its performance under this Agreement, including obtaining all such approvals and/or permits as may be required hereunder.

35. NO THIRD-PARTY BENEFICIARY. Each party is entering into this Agreement solely based on the representations contained herein for its own purposes and not for the benefit of any third party.

36. NOTICES AND CHANGE OF ADDRESS. All notices or other communications under this Agreement shall be in writing and delivered in person, or sent by receipted courier, express mail, e-mail, or postage prepaid certified or registered mail, addressed to the party for whom it is intended, at the addresses set forth in this Agreement. Either party may change its address for notice by giving written notice to the other party. Any notice or other communication shall be deemed given no later than the date actually received. Notice by courier, express mail, certified mail, or registered mail shall be deemed given on the date it is officially recorded as delivered and, in the absence of such record of delivery, it shall be rebuttably presumed to have been delivered on the third Business Day after it was deposited. Notices sent by e-mail require tangible confirmation of receipt from addressee.

37. ASSIGNMENT. Customer may not assign this Agreement without the prior written consent of Company. Company may assign its rights and delegate its duties under this Agreement, without the prior consent of Customer, to an Affiliate, or to a third party in the event of a spin-off, merger, business combination, consolidation or sale of all, or substantially all, of its assets or business that are related to this Agreement. The rights and duties in this Agreement shall bind and inure to the benefit of any such assignee.

38. SEVERABILITY. If any provision of this Agreement is held to be invalid, illegal, or unenforceable under any statute, regulation, ordinance, executive order, or other rule of law, that provision will be deemed severed to the extent necessary to comply with such statute, regulation, ordinance, order, or rule. In the event such provision is deemed severed, the parties will negotiate in good faith to arrive at an alternative arrangement approximating the original business objective of the parties. The remaining terms and conditions of this Agreement will remain in effect.

39. NO IMPLIED WAIVER. The failure of either party at any time to require performance by the other party of any provision of this Agreement will in no way affect the right to require such performance at any time thereafter, nor will the waiver of either party of a breach of any provision of this Agreement constitute a waiver of any succeeding breach of the same or any other provision.

40. MISCELLANEOUS. (a) This Agreement does not make either party the agent or legal representative of the other party. Neither party is authorized to create any obligation on behalf of the other party including, but not limited to, the obligation for payment of any

service or warranty obligation hereunder; (b) The rights and remedies herein reserved to Company are cumulative and additional to any other rights and remedies provided at law or equity; (c) The official text of this Agreement is in the English language. If this Agreement is translated into another language, the English text will govern any question with respect to interpretation; (d) The headings in this Agreement are for convenience of reference only and do not affect the meaning of this Agreement in any manner.

DEFINITIONS.Capitalized terms have the meanings set forth in this Section, or in the Section in which they first appear in this Agreement. “Agreement” means these Allegion Terms and Conditions of Sale and Service, together with any applicable Country Supplement or Region Supplement provided by Company, and all of the documents referenced herein or therein.“Affiliate” means any Person that directly or indirectly, through one or more intermediaries, controls, is controlled by, or is under common control with, the Company. The term “control” (including the terms “controlled by” and “under common control with”) means the possession, directly or indirectly, of the power to direct or cause the direction of the management and policies of a Person, whether through the ownership of voting securities, by contract or otherwise. “Business Day” means any day except Saturday, Sunday or any other day on which commercial banks located in the United States are authorized or required by Law to be closed for business. “Company” means Schlage Lock Company, LLC or any subsidiary or affiliate thereof selling products that are part of the Allegion product portfolio. Schlage Lock Company and/or its subsidiary or affiliates will be severally but not jointly liable under the Agreement. “Company Marks” refers to the Marks of Company. “Confidential Information” shall mean any and all information provided by either party to the other party pertaining to the disclosing party’s business. Confidential Information shall include, but not be limited to, any bitting lists, formulae for products, manufacturing processes, production techniques, packaging processes, methods, research materials, ideas, marketing plans and related materials, quality standards, test results and data, apparatus, engineering drawings, contract documents, computer software, hardware, or firmware, business activities information such as financial information, reports, projections, books and records, customer and supplier information, and operations, customer and supplier lists and data, specifications, know how, and other Proprietary Information or Trade Secrets (as defined herein) that either party may furnish to the other party. Confidential Information shall not include information that: (a) is or becomes publicly known if such public knowledge or disclosure is not the result of any act or failure to act on the part of the receiving party; (b) is, at the time of disclosure, already known to the Receiving Party without utilizing the Confidential Information; (c) is information disclosed to the Receiving Party by a third party which is not to the Receiving Party’s knowledge, after inquiry of the third party, under a duty of confidentiality to the Disclosing Party; or (d) is independently developed by the Receiving Party without the use of Confidential Information. The Receiving Party shall have the burden of proof as to prior knowledge and absence of breach. Confidential Information may be furnished in any tangible or intangible form including, but not limited to, writings, drawings, computer and other electronic media, logic diagrams, component specifications, graphs, prototypes, samples, or verbal communications and regardless of whether such information is marked or designated as “confidential.” For the avoidance of doubt, all information, knowledge or data disclosed by Company to Customer, regardless of whether disclosed in written, tangible, oral, visual or other form, including, without limitation, sample products, equipment, software, or other objects or material, provided by Company to Customer, and all information, knowledge or data which was obtained by Customer from visits to Company’s facilities, shall be considered “Confidential Information” under this Agreement. “Content” means all information (including without limitation any text, music, sound, photographs, video, graphics, data or software), in any medium, on a particular Company Web page or Website or in Marketing Materials. “Customer” means the purchaser of Deliverables from Company. “Deliverables” means any good or service or both purchased by Customer from Company under these General Terms and Conditions of Sale and Service. “End Users” means the purchaser that (a) has acquired a Deliverable from Customer for (i) its own and its Affiliate’s/Affiliates’ internal use and not for resale, remarketing or distribution or (ii) incorporation into its own products and (b) is an individual or entity, other than any federal, state or local agency, office or division.“IP” means all intellectual property and industrial property rights comprising or relating to/of the following: (a) Patents; (b) Trademarks; (c) internet domain names, whether or not Trademarks, registered by any authorized private registrar or Governmental Authority, web addresses, web pages, website and URLs; (d) works of authorship, expressions, designs and design registrations, whether or not copyrightable, including copyrights and copyrightable works, software and firmware, application programming interfaces, architecture, files, records, schematics, data, data files, and databases and other specifications and documentation; (e) Trade Secrets; and (f) all other intellectual property and industrial property rights, and all rights, interests and protections that are associated with, equivalent or similar to, or required for the exercise of, any of the foregoing, however arising, in each case whether registered or unregistered and including all registrations and applications for, and renewals or extensions of, such rights or forms of protection pursuant to the Laws of any jurisdiction throughout in any part of the world.“Marketing Materials” means all marketing brochures, buckslips, pamphlets, emails, text, call scripts or other material, whether in printed format, audio or audiovisual format, or in any other format, that contain any (i) Content relating to the Company Deliverables or (ii) Company Marks. “Marks” means collectively the domain names, trademarks, trade names, service marks, trade dress, logos, and the like used or provided by either party for use in connection with this Agreement. “Patents” means all patents (including all reissues, divisionals, provisionals, continuations and continuations-in-part, re-examinations, renewals, substitutions and extensions thereof), patent applications, and other patent rights and any other Governmental Authority-issued indicia of invention ownership (including inventor’s certificates, petty patents and patent utility models). “Person” means a person or entity.“Price Books” mean Company’s current Price Book in effect for the applicable Deliverable being purchased by Customer. “Trade Secrets” means and includes business or technical information of either party, including processes, formulas, devices, techniques, compilations and other material that a party attempts to maintain in secret and that derive commercial value for such party from not being generally known to the public or readily ascertainable through independent development or reverse engineering.


CATALOG ITEMS NUMERICAL INDEX

TYPE 3For Use with All Offset Closers and Pivot Sets

TYPE 1For Doors Hung in Center of Frame

TYPE 4For Doors Hung Flush with Face of Frame

TYPE 5For Use with Offset Closers and Pivot Sets

Left Hand Shown

CUSTOM CHARGE:

FIRE LABELING:

FABRICATION:

$ 57.87 net single door$ 116.40 net double door

Special packing or marking available at extra cost.




$ 1.61 NET PER LABEL

All items cut with tolerance -0+1/8”(3.2) to 1/2”(12.7) unless exact size specified.Drilling according to industry practice.All threshold straight cut.No drilling for threholds #672 to 6710, 101, 102, 103, 105, 106, 233, 236, 546, 547, 548, 656, 6570, 6575 unless specified & templates supplied.PIVOT HOLES $ 18.52 net eachCOPING (Detail required): - L cut $ 18.52 net each - U cut $ 37.04 net eachRETURN ENDS $ 83.44 net each, per threshold MITER $ 4.18 net eachRIPPING $ 5.20 net per footSPOT WELD $ 7.53 net per footBEVELING $ 5.20 net per footFLOOR CLOSER COVER:

•

•••

••

••••••

POLISHING:POL (Polished Standard) Add 40% to net priceORB (Oil Rubbed Bronze Finish) Add 40% to net price

••

OPTIONS:E (Epoxy) $ 8.68 per inch per footV3 (Aluminum Oxide Filler, Full Body) $ 12.44 per inch per footZAG (Anti-Ligature) $ 1.14 list per footFLO (Airflow option for Door Sweeps and Door Bottom) FLO-2 (neoprene or brush insert, 2 rows) $ 2.12 net/ftFLO-3 (neoprene insert, 3 rows) $ 3.18 net/ft

••••

FASTENERS:Supplied at no charge except drive screws & nails. Flathead wood screws supplied with threshold, expansion shields extra.

FINISH DESIGNATIONS / ABBREVIATIONS:= Aluminum, Mill finish= 204 R1 Clear Anodized finish= Architectural Bronze, Mill finish= 2 Step Dark Bronze Anodized (Dark Brown)= 204 R1 Gold Anodized finish

= Oil Rubbed Bronze finish= Powder Coating finish. Specify color= Steel Prime= Stainless Steel= Pressure Sensitive Adhesive

AAABDG

ORBPCSPSTSTPSA

Left Hand Shown

Left Hand Shown

Left Hand Shown

+

+

+

+

PARTNUMBER

LIST PRICE PER FOOT TYPE

LIST PRICE PER METER DESCRIPTION

1B 1Z1HZ 1SZ 2B 2Z 3B 3Z 4B 4Z 5B 5Z 6B 6Z 7WC 10FB 10FZ 11A 11D 11G 12B 12Z 15A 15B 16B 17B 18B 18S 19B 19WB 19WS 20 21B 23B 23Z 25A 25D 25G 29A 29D 30 31AA 31D 31G 32AA 32D 32G 33AA 33D 33G 34AA 34D 34G 34P-Bk-PSA 34P-Gy-PSA 35AA 35D35G36AA36D36G

4.91 1.64 2.29 3.34 4.91 1.64 4.70 1.57 8.64 2.88 9.43 3.15 CALL

CALL

4.33CALLCALL3.965.485.48

5.89 1.77 5.64

31.12 2.49 3.27 1.51 2.41 1.73 1.77 2.94 CALL

195.52 5.90 1.82 2.274.304.30

11.0015.50CALL6.949.869.866.949.869.866.949.869.869.59

13.4613.46

3.933.939.59

13.46 13.46

9.4513.4613.46

16.12 5.37 7.52

10.97 16.12

5.37 15.43

5.14 28.36

9.44 30.93 10.32

14.20

13.0017.9817.98

19.34 5.79

18.49 102.10

8.17 10.74

4.95 7.90 5.68 5.79 9.63

19.37 5.97 7.45

14.1014.1036.1050.85

22.7832.3632.3622.7832.3632.3622.7832.3632.3631.4644.1544.1512.8812.8831.4644.1544.1530.9944.1544.15

Window Protection Window Protection Window Protection Window Protection Window Protection Window Protection Window Protection Window Protection Window Protection Window Protection Window Protection Window Protection Window Protection

Window Protection

Window Protection Window Protection Door Protection Gasketing Gasketing Gasketing Door Wheaterstrip Door Wheaterstrip Threshold Threshold Window Protection Window Protection Gasketing Gasketing Gasketing Gasketing Gasketing Window Protection

Gasketing Door Sweep Door Sweep Gasketing Gasketing Gasketing Window Protection Window Protection Window Protection Gasketing Gasketing Gasketing Gasketing Gasketing Gasketing Gasketing Gasketing Gasketing Meeting Stile Meeting Stile Meeting Stile Miscellaneous Miscellaneous Meeting Stile Meeting Stile Meeting Stile Meeting Stile Meeting Stile Meeting Stile

Bronze for Sill & HeadZinc for Sill & HeadZinc for Head, Heavy DutyZinc for Sill, Heavy DutyBronze Hemmed HookZinc Hemmed HookBronze Double FlatZinc Double FlatBronze Jamb 1 3/4” (44.5) Top SashZinc Jamb 1 3/4” (44.5) Top SashBronze Jamb 2 1/8” (54.0) Lower SashZinc Jamb 2 1/8” (54.0) Lower SashSeries, Bronze Double Hung Wood(See Catalog Part #1B, 2B, 3B, 4B, 5B)Series, Zinc Double Hung Wood(See Catalog Part #1Z, 2Z, 3Z, 4Z, 5Z)Weather CheckSeries, Bronze Interlocking (See Part #12B)Series, Zinc Interlocking (See Part #12Z)Aluminum Rain DripDark Bronze Anodized Rain DripGold Anodized Rain DripBronze Single BaseZinc Single BaseAluminum Butt Threshold 1.4”(35.6)Bronze Butt Threshold 1.4”(35.6)Spring Bronze for Steel CasementSpring Bronze for Steel CasementCushion Bronze 9/16” (14.2)Cushion Stainless Steel 9/16” (14.2)Cushion Bronze 3/4” (19.1)Cushion Bronze 1 1/8” (28.6)Cushion Stainless Steel 1 1/8” (28.6)Series for Double Hung Wood(See Catalog Part #32,19,18L)Spring Bronze 1 1/4” (31.8) 100’ CoilsBronze Sill HookZinc Sill HookExtruded Aluminum AngleDark Bronze Anodized AngleGold Anodized AngleAluminum Sill Casement In-openingDark Bronze Anod. Sill Casement In-opening Series (See Catalog Part # 2, 3, 12)Clear Anodized Bumper Strip / NeopreneDark Bronze Anod. Bumper Strip/ NeopreneGold Anodized Bumper Strip/ NeopreneClear Anodized Bumper Strip / BrushDark Bronze Anodized Bumper Strip/ BrushGold Anodized Bumper Strip / BrushClear Anodized / Neoprene LipDark Bronze Anodized / Neoprene LipGold Anodized / Neoprene LipClear Anodized / Brush / Adjustable Dark Bronze Anodized / Brush / Adjustable Gold Anodized / Brush / Adjustable Self Adhesive Pile Brush, BlackSelf Adhesive Pile Brush, GrayClear Anodized/ Neoprene Lip/ AdjustableDark Bronze Anod./ Neoprene Lip/ AdjustableGold Anodized/ Neoprene Lip/ AdjustableClear Anodized/ Neoprene Lip/ AdjustableDark Bronze Anod./ Neoprene Lip/ AdjustableGold Anodized / Neoprene Lip/ Adjustable

$$$ $ $ $ $ $ $ $ $ $

$

$$ $ $ $ $ $ $ $ $ $ $ $ $

$$ $$ $ $ $$

$ $$$$$$$$ $$$ $$$$$$$$

$$$ $ $ $ $ $ $ $ $ $

$

$$ $ $ $ $ $ $ $ $ $ $ $ $

per 100 ft.$ $$ $ $ $$

$ $$$$$$$$ $$$ $$$$$$$$


PARTNUMBER

LIST PRICE PER FOOT TYPE DESCRIPTION

LIST PRICE PER METER

PARTNUMBER



38AA38D38G39A39D

39WA39WD

40AA40D41AA41D42A

43SP43STST44XA

44SP44STST47A50A50MA51A-9051A-18052A53A55AA

55D

55FS-AA

55FS-D

56AA56D

56G56FS-AA56FS-D56FS-G58FS-AA58FS-D58FS-G59FS-A

63A63B64A65A

68A68B69A70A70B72A73A76B77

80A

9.4513.4613.46

7.009.45

9.5912.84

15.5423.1913.7214.82

7.82

12.8326.8422.31

9.8516.07

7.965.626.34

12.7013.57

9.116.94

19.04

27.92

25.28

31.69

19.0427.92

27.92 24.13 32.92 32.92

9.26 11.81 11.81 14.99

7.55 26.93

5.43 16.49

5.64 26.08

5.43 10.09 51.08 11.11 12.62 75.80

CALL

14.09

30.9944.1544.1522.9731.00

31.4642.12

50.9876.0745.0248.6125.65

42.1088.0573.20

32.3152.7426.1118.4420.8041.6844.5229.8922.7862.46

91.62

82.94

103.97

62.4691.62

91.62 79.17

108.00 108.00

30.38 38.75 38.75 49.19

24.78 88.37 17.81 54.11

18.49 85.57 17.81 33.12

167.58 36.46 41.42

248.71

46.21

Meeting Stile Meeting Stile Meeting Stile Door Sweep Door Sweep

Door Sweep Door Sweep

Meeting Stile Meeting Stile Meeting Stile Meeting Stile Gasketing

Meeting Stile Meeting Stile Meeting Stile Meeting Stile Meeting Stile Meeting Stile Gasketing Door Sweep Finger Guard Finger Guard Door Sweep Door Sweep Meeting Stile

Meeting Stile

Meeting Stile

Meeting Stile

Meeting Stile Meeting Stile

Meeting Stile Meeting Stile Meeting Stile Meeting Stile Gasketing Gasketing Gasketing Gasketing Threshold Threshold Threshold Threshold

Threshold Threshold Threshold Threshold Threshold Door Sweep Threshold Threshold Threshold

Threshold

Clear Anodized / Solid InsertDark Bronze Anodized / Solid InsertGold Anodized / Solid InsertAluminum / Solid Neoprene 1/2”(12.7)Dark Bronze Anodized / Solid Neoprene 1/2”(12.7)Aluminum / Solid Neoprene 1 1/4”Dark Bronze Anodized /Solid Neoprene 1 1/4”Clear Anodized Astragal / Magnet VinylDark Bronze Anod. Astragal/ Magnet VinylClear Anodized Security AstragalDark Bronze Anodized Security AstragalSeries, Aluminum Security Seal (See Catalog Part # 240A and 25A)Steel Prime Astragal 2 1/4” (57.2)Stainless Steel Astragal 2 1/4” (57.2)Aluminum 1.470” (37.3) x .375”(9.5)Lead-LinedSteel Prime Astragal 1 1/2” (38.1)Stainless Steel Astragal 1 1/2” (38.1)Aluminum shim1 3/4”(44.5) x 1/8”(3.2)Aluminum / NeopreneAluminum / Beveled Neoprene6” W rubber, grey. For doors that open to 90°8” W rubber, grey. For doors that open to 180°Neoprene in Aluminum Track, 1 7/16”(36.5)Neoprene in Aluminum Track, 3/4”(19.1)Clear Anodized / Solid Insert Adjustable Surface AstragalDark Bronze Anodized / Solid InsertAdjustable Surface AstragalClear Anodized / Solid Insert Intumescent, Adjustable Surface AstragalDark Bronze Anodized / Solid InsertIntumescent, Adjustable Surface AstragalClear Anodized Adjustable Mortised AstragalDark Bronze Anodized / Solid InsertIntumescent, Adjustable Mortised AstragalGold Anodized Adjustable Mortised AstragalClear Anodized Intumescent Fire Stop Dark Bronze Anod. Intumescent Fire Stop Gold Anodized Intumescent Fire Stop Clear Anodized Intumescent Fire Stop Dark Bronze Intumescent Fire Stop Gold Anodized Intumescent Fire Stop Aluminum / Intumescent / Neoprene Blade/ PSAAluminum Threshold 3”(76.2) x 1/4”(6.4)Bronze Threshold 3” (76.2) Aluminum Threshold 2 1/2” (63.5)Aluminum Threshold / Neoprene Stop5” (127.0) wide 1/2” (12.7) highAluminum Threshold Rest 1/2” (12.7)Bronze Threshold Rest 1/2” (12.7)Aluminum Plate 1/4”(6.4) x 1 1/8”(28.6)Aluminum Threshold 3” (76.2)Bronze Threshold 3” (76.2) Neoprene in Aluminum TrackAluminum 4”(10.6) / Neoprene Stop Bronze / Water Return option 3 1/2” (88.9)Series, Bulkhead Door Adjustable Threshold (See Catalog Part # 105, 106, 475 & Adjustable Flat Plates)Aluminum Threshold 4 1/4” (108.0)

80B81A

84

87

9394

95A96A98A98A-PSA98D98D-PSA99A99D100A100D101A102A103A104A105A105B

106A110A111A111FS-A117S-Bk118B118S119B119WB119WS132

133134135136137137P-Bk-PSA137P-Gy-PSA137Tape

138138Tape

139A139D139N140A140FS-A141AA142A142D142G144A148

153A

69.21 11.91

5.90

5.88

15.5349.47

9.5316.38

6.196.599.159.556.199.216.199.15

12.19 12.77 15.58 14.71 14.09 56.30

10.32 9.729.72

10.55 1.29 1.86 3.25 2.35 2.62 4.20

7.80 7.80 4.83 6.70 6.40 2.13 2.13

21.64

8.32 31.20

6.749.073.128.53

12.937.766.66

11.2311.23

3.6112.55

8.75

227.09 39.08

19.37

19.31

50.97162.29

31.2853.7320.3021.6230.0131.3220.3030.2120.3030.01

40.01 41.90 51.13 48.27 46.21

184.72

$33.84 31.8831.8834.62 4.22 6.10

10.65 7.71 8.60

13.78

25.59 25.59 15.83 21.98 20.99

6.98 6.98

27.28

22.1229.7710.2227.9742.4225.4621.8536.8436.8411.8541.18

28.71

Threshold Threshold

Threshold

Gasketing

Gasketing Gasketing

Gasketing Door Sweep Gasketing Meeting Stile Gasketing Meeting Stile Gasketing Gasketing Gasketing Gasketing Threshold Threshold Threshold Threshold Threshold Threshold

Threshold Door Sweep Door Sweep Door Sweep Gasketing Gasketing Gasketing Gasketing Gasketing Gasketing Gasketing

Meeting Stile Meeting Stile Meeting Stile Meeting Stile Meeting Stile Miscellaneous Miscellaneous Miscellaneous

Meeting Stile Miscellaneous

Gasketing Gasketing Gasketing Gasketing Gasketing Rain Drip Rain Drip Rain Drip Rain Drip Gasketing Gasketing

Door Sweep

Bronze 4 1/4” (108.0)Aluminum 4” (101.6) Threshold,Water Return with Drain Pan optionTraction Tread Neoprene1” (25.4) Wide x 1/4” (6.4) ThickSeries, Meeting Stile Astragal (See Catalog Part # 144, 25A)3” (76.2) Loop NeopreneSeries, Sliding Hangar Doors(See Catalog Part # 948, 69, 93, 97)Aluminum / NeopreneAluminum / BrushAluminum / BrushAluminum / Brush / PSADark Bronze Anodized / BrushDark Bronze Anodized / Brush / PSAAluminum / NeopreneDark Bronze Anodized / NeopreneAluminum / Neoprene LipDark Bronze Anodized / Neoprene LipAluminum Threshold 5” (127.0)Aluminum 5 1/2” (139.7) Off Set ThresholdAluminum 7” (177.8) Off Set ThresholdAluminum 6” (152.4) Off Set ThresholdAluminum Bulkhead Door Threshold 3” (76.2)Bronze Bulkhead Door Threshold1 7/8” (47.6)Aluminum Bulkhead Door Threshold 3/4” (19.1)Aluminum Door Shoe / PileAluminum Door Shoe / NeopreneAluminum Door Shoe / IntumescentBlack Silicone Seal / Self Adhesive Cushion Bronze / Adhesive 9/16” (14.2)Cushion Stainless Steel / Adhesive 9/16”(14.2)Cushion Bronze / Adhesive 3/4” (19.1)Cushion Bronze / Adhesive 1 1/8”(28.6)Cushion Stainless Steel / Adhesive 1 1/8” (28.6) Series, Head & Lock Side Jamb (See Catalog Part #1, 2, 3, 12)Glass Edge Protection 1/2”(12.7) PVC/ BrushGlass Edge Protection 1/2”(12.7) PVC/ NeopreneGlass Edge Protection 1/2”(12.7) PVCGlass Edge Protection 3/4”(19.1) PVCPVC/ Pile for 1/2” (12.7) Glass DoorPile Brush / Black / PSA Pile Brush / Gray / PSADouble-coated Foam Tape, White, 3/8” (9.5)wide, 216 ft. coilPVC/ Pile for 3/4” (19.1) Glass DoorDouble-coated Foam Tape, White, 5/8” (15.9)wide, 216 ft. coilAluminum / NeopreneDark Bronze Anodized / NeopreneNeoprene 1 1/4”(31.8) x 3/16”(3.2) Aluminum / NeopreneAluminum / Intumescent Fire Stop / NeopreneClear Anodized Extruded Rain DripAluminum Extruded Rain DripDark Bronze Anodized Rain DripGold Anodized Rain DripAluminum Extruded Hook / Silicone Tube Series, Interlocking Water Shed (See Catalog Part #142, 25A, 144)Aluminum / Neoprene

$ $$ $ $

$ $

$ $$ $ $

$$ $

$$$$$ $ $ $ $ $

$

$

$

$$

$$$$ $ $ $ $

$$ $$

$$ $ $$ $$ $

$

$ $$ $$

$ $

$ $$ $ $

$$ $

$$$$$ $ $ $ $ $

$

$

$

$$

$$$$ $ $ $ $

$ $ $ $

$ $ $$$ $$ $

$

$$

$ $ $ $

$$ $ $ $ $$ $ $ $ $ $$ $$$

$$$$$$ $ $$ $CALL

$$$$ $ $ $ $

$ $

$ $ $ $ $ $ $ $ $ $$

$

$$

$ $ $ $

$$ $ $ $ $$ $ $ $ $ $$ $$$

$$$$$$ $ $ $$

$$$$$$ $ /coil

$ /coil

$$ $ $ $ $ $ $ $ $ $

$


PARTNUMBER



PARTNUMBER

LIST PRICE PER FOOT TYPE / SIZE


153D154A154D155AA

155D

156AA

156D

156G

159FS-A164A164B164STST168A168B170AA170D170G175A175B188BIO188FS188S-Bk188S-Br188S-Cl188S-Gy188S-Wh200AIL200STC200X201STC221 - 227232A

233A

234A

235A236A237A238A239A240A245245BB253A253FS-A254A255AA

255D

258R259R265A267A268A268B

13.2010.0013.4519.99

29.32

19.04

27.92

27.92

13.07 13.26 48.60

113.69 9.49

30.37 20.29 26.84 26.84 15.13 90.33

1.85 2.94 1.68 1.68 1.68 1.68 1.68

23.90

10.89

10.89

10.89 14.42 15.84 15.84 15.84

5.2875.56

109.215.22

15.415.62

18.69

27.00

80.57 26.85 14.98 12.10

4.94 23.71

43.3132.8044.1265.59

96.20

62.46

91.62

91.62

42.89 43.51

159.47 373.00

31.15 99.65 66.56 88.06 88.06 49.64

296.39 6.07 9.63 5.53 5.53 5.53 5.53 5.53

78.41

35.72

35.72

35.72 47.33 51.97 51.97 51.97 17.32

17.1250.5618.4461.33

88.60

264.36 88.11 49.16 39.69 16.20 77.79

Door Sweep Door Sweep Door Sweep Meeting Stile

Meeting Stile

Meeting Stile Meeting Stile

Meeting Stile

Meeting Stile Threshold Threshold Threshold Threshold Threshold Gasketing Gasketing Gasketing Threshold Threshold Gasketing Gasketing Gasketing Gasketing Gasketing Gasketing Gasketing Louvers Louvers Louvers Miscellaneous Fasteners Threshold

Threshold Threshold

Threshold Threshold Threshold Threshold Threshold Gasketing Window Protection Window Protection Door Sweep Door Sweep Door Sweep Door Sweep

Door Sweep

Threshold Threshold Threshold Threshold Threshold Threshold

Dark Bronze Anodized / NeopreneAluminum Angle Track / PileDark Bronze Anodized Angle Track / PileClear Anodized / Pile Brush Surface Mounted, Adjustable AstragalDark Bronze Anodized / Pile Brush Surface Mounted, Adjustable AstragalClear Anodized / Pile Brush, Mortised, AdjustableDark Bronze Anodized / Pile Brush Mortised, Adjustable AstragalGold Anodized / Pile Brush Mortised, Adjustable AstragalAluminum Track Intumescent Fire StopAluminum / Smooth Top 4” (101.6) x 1/2” (12.7)Bronze / Smooth Top 4” (101.6) x 1/2” (12.7)Stainless Steel/ Smooth Top 4”(101.6) x 1/2”(12.7)Aluminum Threshold Rest 3/4” (19.1)Bronze Threshold Rest 3/4” (19.1)Clear Anodized / Adjustable Sound SealDark Bronze Anodized / Adjustable Sound Seal Gold Anodized / Adjustable Sound SealAluminum / Water Return option 5”(127.0)Bronze / Water Return option 5”(127.0)Antibacterial Rubber / White / PSAIntumescent/ Neoprene/ PSA/ Compress-O-MaticSilicone / Black / PSA Compress-O-MaticSilicone / Brown / PSA Compress-O-MaticSilicone / Clear / PSA Compress-O-MaticSilicone / Grey / PSA Compress-O-MaticSilicone / White / PSA Compress-O-MaticVision-proof Louvers, Fire ratedVision-proof Louvers, AcousticalVision-proof Louvers, Lead-linedAdaptor. For use with #200STCAnchors. See back cover for more information.Aluminum Ramp 6” (152.4) 1/2”(12.7) to 1”(25.4) RampAluminum Ramp 3” (76.2)1/2”(12.7) to 3/4”(19.1) RampAluminum Ramp 3” (76.2)1/4”(6.4) to 1/2”(12.7) RampAluminum Ramp 3” (76.2), 0 to 1/4”(6.4) RampAluminum Ramp 6” (152.4)Aluminum Ramp 3 1/2” (88.9), 1/4”to 1/2”Aluminum Ramp 3 1/2” (88.9), 1/4” to 3/4”Aluminum Ramp 3 1/2” (88.9)Aluminum / Neoprene, Security Brass Sash Pulley 120 lbs. Wt. Brass Sash Pulley 250 lbs. Wt.Aluminum / Neoprene Insert / MortisedAluminum / Intumescent Fire Stop / MortisedAluminum Track / Pile Insert / MortisedClear Anodized / AdjustableSurface Sweep with Spring / Pile InsertDark Bronze Anodized / AdjustableSurface Sweep with Spring / Pile InsertRubber ramp 6” (152.4). Used with #259RRubber ramp 6” (152.4) x 1/2” (12.7)Aluminum 5” (127.0) / Neoprene StopAluminum 2.155” (54.7) / Neoprene StopAluminum Threshold Rest 3/8” (9.5)Bronze Threshold Rest 3/8” (9.5)

Aluminum Assembly ConnectorAluminum Door Stop / NeopreneAluminum Door Stop / NeopreneClear Anodized/ Neoprene/ Intumet Fire StopBronze / Neoprene Intumescent Fire StopDark Bronze Anodized / Neoprene /Intumescent Fire StopGold Anodized / NeopreneIntumescent Fire StopAluminum Butt Threshold1 1/2” (38.1) wide Dark Bronze Anodized Butt Threshold1 1/2” (38.1) wide Gold Anodized Butt Threshold 1 1/2” (38.1) Aluminum / NeopreneNeoprene, no PSA 3/16”(4.7) x 1/2”(12.7)Neoprene with PSA 3/16”(4.7) x 1/2”(12.7) Clear Anodized / NeopreneBronze / NeopreneDark Bronze Anodized / NeopreneGold Anodized / NeopreneClear Anodized / NeopreneDark Bronze Anodized / NeopreneGold Anodized / NeopreneClosed Cell Sponge NeopreneBlack 3/8”(9.5) x 3/4”(19.1) Clear Anodized / Economical MortisedAutomatic Door Bottom

Clear Anodized / Economical MortisedAutomatic Door Bottom

Dark Bronze Anodized / EconomicalMortised Automatic Door Bottom

Aluminum with neopreneClear Anodized / Mortised, HandedAutomatic Door Bottom

Clear Anodized / NeopreneCompress O-Matic SealBronze / Neoprene Compress O-Matic SealDark Bronze Anodized / NeopreneCompress O-Matic SealGold Anodized/ Neoprene Compress O-MaticClear Anodized/ Neoprene Compress O-MaticPhotoluminescent Sill ProtectionBronze / Neoprene Compress O-maticDark Bronze Anodized / NeopreneCompress O-Matic SealGold Anodized Compress O-MaticClear Anodized / NeopreneIntumescent Fire StopDark Bronze Anodized / NeopreneIntumescent Fire StopGold Anodized / NeopreneIntumescent Fire Stop

Threshold Gasketing Gasketing Gasketing Gasketing Gasketing

Gasketing

Threshold Threshold

Threshold Gasketing Gasketing Gasketing Gasketing Gasketing Gasketing Gasketing Gasketing Gasketing Gasketing Gasketing

12”-18” (30.4-45.0)18 1/8”-36” (46.0-91.4)36 1/8”-48” (91.7-121.9)48 1/8”-54” (122.2-137.1)54 1/8”-60” (137.4-152.4)12”-18” (30.4-45.0)18 1/8”-36” (46.0-91.4)36 1/8”-48” (91.7-121.9)48 1/8”-54” (122.2-137.1)54 1/8”-60” (137.4-152.4)12”-18” (30.4-45.0)18 1/8”-36” (46.0-91.4)36 1/8”-48” (91.7-121.9)48 1/8”-54” (122.2-137.1)54 1/8”-60” (137.4-152.4)Gasketing12”-18” (30.4-45.0)18 1/8”-36” (46.0-91.4)36 1/8”-48” (91.7-121.9)48 1/8”-54” (122.2-137.1)54 1/8”-60” (137.4-152.4) Gasketing Gasketing Gasketing Gasketing Gasketing Gasketing Gasketing Gasketing

Gasketing Gasketing

Gasketing

Gasketing

6.048.798.79

8.13 21.23 10.73

10.73

6.19 8.06

8.06 4.75 1.29 1.56 7.53

18.398.648.648.869.869.862.88

51.54 42.95 45.77 57.22 70.96 57.00 48.52 62.47 78.20 97.73 69.80 58.17 80.44

100.52 125.64

8.86 50.29 41.91 44.66 55.82 69.75

8.12

20.0310.94

10.947.86

13.2618.3910.61

10.61 11.59

15.36

15.36

269A270A272A302FS-AA302FS-B302FS-D

302FS-G

304A304D

304G312A312N312N-PSA314AA314B314D314G318AA318D318G318N

320AA

321AA

321D

322A323AA

326AA

326B326D

326G328AA328AA-L328B328D

328G328FS-AA

328FS-D

328FS-G

19.8228.8228.82

26.69 69.67 35.20

35.20

20.31 26.44

26.44 15.57

4.23 5.12

24.7260.3528.3328.3329.0632.3632.36

9.44

29.06

26.65

65.7135.90

35.9025.8043.5260.3534.83

34.83 38.03

50.39

50.39

$$$$

$

$

$

$

$$$$$$ $ $ $ $ $ $$ $$ $ $$Call with dimensionsCall with dimensions Call with dimensionsCall with dimensionsSee back cover$

$

$

$$ $$$$$ $ $$ $ $ $ $ $ $ $ $ $

$$$$

$

$

$

$

$$$ $$$ $ $ $ $ $$ $ $$ $ $$

$

$

$

$$ $$$$each each $$ $ $ $ $ $ $ $ $ $

$$$$$$

$

$$

$$$$$$$$$$$$

$$$$$$$$$$$$$$$$$$$$$$

$$

$ $ $$$

$$

$

$

$$$$$$

$

$$

$$$ $$$$$$$$$

eacheacheacheach eacheacheacheacheacheacheacheacheacheacheach$eacheacheacheacheach$

$$

$$$$$

$$

$

$


PARTNUMBER

LIST PRICE PER FOOT TYPE / SIZE DESCRIPTION


PARTNUMBER LIST PRICE SIZE DESCRIPTION

Clear Anodized / MortisedAutomatic Door Bottom / Heavy Duty

Clear Anodized Automatic Door Bottom / Heavy Duty

Dark Bronze Anodized Automatic Door Bottom / Heavy Duty

Gold AnodizedAutomatic Door Bottom / Heavy Duty

Clear Anodized / MortisedAutomatic Door Bottom / Heavy Duty

Clear Anodized / Mortised Automatic Door BottomHeavy Duty / Intumescent

Clear Anodized/ MortisedAutomatic Door BottomHeavy Duty / Low ForceClear AnodizedAutomatic Door Bottom / Heavy Duty

Dark Bronze Anodized Automatic Door Bottom / Heavy Duty

Gold Anodized Automatic Door Bottom / Heavy Duty

Clear AnodizedAutomatic Door Bottom Heavy Duty / Intumescent

Dark Bronze AnodizedAutomatic Door BottomHeavy Duty / Intumescent

Gold AnodizedAutomatic Door BottomHeavy Duty / Intumescent

Clear AnodizedAutomatic Door Bottom Heavy Duty / Low ForceDark Bronze AnodizedAutomatic Door Bottom Heavy Duty / Low Force

each each each each each each each each each each each each each each each each each each each each each each each each each each each each each each each each each each each each each each each each each each each each each each each each each each each each each each each each each each each each each each each each each

Steel Prime Closer Plate Bracket. Must be purchased with related Zero item.Stainless Steel Closer Plate Bracket.Must be purchased with related Zero item.Clear Anodized w/ Beveled NeopreneBronze with Beveled NeopreneDark Bronze Anod. / Beveled NeopreneGold Anodized / Beveled NeopreneAluminum with Neoprene LipAluminum with Pile BrushClear Anodized / NeopreneBronze / NeopreneDark Bronze Anodized / NeopreneGold Anodized / NeopreneClear Anodized / Neoprene/ IntumetDark Bronze Anod./Neoprene/ IntumetClear Anodized / NeopreneBronze / NeopreneDark Bronze Anodized / NeopreneGold Anodized / NeopreneAluminum / Mortised / HandedAutomatic Door Bottom

Aluminum / Mortised Automatic Door Bottom

Aluminum / Mortised Automatic Door Bottom / Low Force

Aluminum / MortisedAutomatic Door Bottom / Lead-Lined

Clear Anodized Automatic Door Bottom

Dark Bronze AnodizedAutomatic Door Bottom

Clear AnodizedAutomatic Door Bottom / Low Force

Dark Bronze AnodizedAutomatic Door Bottom / Low Force

Clear Anodized Automatic Door BottomLead-Lined / Regular DutyDark Bronze AnodizedAutomatic Door BottomLead-Lined / Regular DutyAluminum/ Mortised/ HandedAutomatic Door Bottom / Regular Duty

Aluminum / MortisedAutomatic Door Bottom / Regular Duty

Intumet Fire Bolt

Miscellaneous Miscellaneous

Gasketing Gasketing Gasketing Gasketing Meeting Stile Meeting Stile Gasketing Gasketing Gasketing Gasketing Door Sweep Door Sweep Gasketing Gasketing Gasketing Gasketing 12”-18” (30.4-45.0)18 1/8”-36” (46.0-91.4)36 1/8”-48” (91.7-121.9)48 1/8”-54” (122.2-137.1)54 1/8”-60” (137.4-152.4)12”-18” (30.4-45.0)18 1/8”-36” (46.0-91.4)36 1/8”-48” (91.7-121.9)48 1/8”-54” (122.2-137.1)54 1/8”-60” (137.4-152.4)12”-18” (30.4-45.0)18 1/8”-36” (46.0-91.4)36 1/8”-48” (91.7-121.9)12”-18” (30.4-45.0)18 1/8”-36” (46.0-91.4)36 1/8”-48” (91.7-121.9)12”-18” (30.4-45.0)18 1/8”-36” (46.0-91.4)36 1/8”-48” (91.7-121.9)48 1/8”-54” (122.2-137.1)54 1/8”-60” (137.4-152.4)12”-18” (30.4-45.0)18 1/8”-36” (46.0-91.4)36 1/8”-48” (91.7-121.9)48 1/8”-54” (122.2-137.1)54 1/8”-60” (137.4-152.4)12”-18” (30.4-45.0)18 1/8”-36” (46.0-91.4)36 1/8”-48” (91.7-121.9)12”-18” (30.4-45.0)18 1/8”-36” (46.0-91.4)36 1/8”-48” (91.7-121.9)12”-18” (30.4-45.0)18 1/8”-36” (46.0-91.4)36 1/8”-48” (91.7-121.9)12”-18” (30.4-45.0)18 1/8”-36” (46.0-91.4)36 1/8”-48” (91.7-121.9)18 1/8”-36” (46.0-91.4)36 1/8”-48” (91.7-121.9)48 1/8”-54” (122.2-137.1)18 1/8”-36” (46.0-91.4)36 1/8”-48” (91.7-121.9)48 1/8”-54” (122.2-137.1)Miscellaneous

20.8055.6132.1232.1220.5720.5722.9760.3535.2335.2338.0349.5231.4663.0341.9241.92

328SPB

328SPB-ST

329AA329B329D329G334A335A339AA339B339D339G339FS-AA339FS-D 339WAA339WB339WD339WG340A

350A

350LS-A

350X

351AA352AA

351D352D

351LS-AA352LS-AA

352LS-D352LS-D

351X-AA352X-AA

351X-D352X-D

354A

355A

357FS

360AA

361AA362AA

361D362D

361G362G

364AA

364FS-AA

364LS-AA

365AA366AA

365D366D

365G366G

365FS-AA366FS-AA

365FS-D366FS-D

365FS-G366FS-G

365LS-AA366LS-AA

365LS-D366LS-D

26.01

92.09

6.3416.95

9.799.796.276.277.00

18.3910.7410.7411.5915.09

9.5919.2112.7812.78 66.92 50.59 53.90 67.33 84.24 66.92 50.59 53.90 67.33 84.24 71.51 57.17 60.59

124.96 99.01

115.56 76.51 61.21 73.53 91.96

114.96 85.57 68.43 94.58

118.25 147.82

82.84 66.29 78.61 92.09 73.65 99.99

131.16 102.10 120.35 143.59 113.72 143.59

50.72 57.48 70.46 50.72 57.48 70.46 35.98

12”-18” (30.4-45.0)18 1/8”-36” (46.0-91.4)36 1/8”-48” (91.7-121.9)48 1/8”-54” (122.2-137.1)54 1/8”-60” (137.4-152.4)12”-18” (30.4-45.0)18 1/8”-36” (46.0-91.4)36 1/8”-48” (91.7-121.9)48 1/8”-54” (122.2-137.1)54 1/8”-60” (137.4-152.4)12”-18” (30.4-45.0)18 1/8”-36” (46.0-91.4)36 1/8”-48” (91.7-121.9)48 1/8”-54” (122.2-137.1)54 1/8”-60” (137.4-152.4)12”-18” (30.4-45.0)18 1/8”-36” (46.0-91.4)36 1/8”-48” (91.7-121.9)48 1/8”-54” (122.2-137.1)54 1/8”-60” (137.4-152.4)12”-18” (30.4-45.0)18 1/8”-36” (46.0-91.4)36 1/8”-48” (91.7-121.9)48 1/8”-54” (122.2-137.1)54 1/8”-60” (137.4-152.4)18 1/8”-36” (46.0-91.4)36 1/8”-48” (91.7-121.9)48 1/8”-54” (122.2-137.1)54 1/8”-60” (137.4-152.4)12”-18” (30.4-45.0)18 1/8”-36” (46.0-91.4)36 1/8”-48” (91.7-121.9)12”-18” (30.4-45.0)18 1/8”-36” (46.0-91.4)36 1/8”-48” (91.7-121.9)48 1/8”-54” (122.2-137.1)54 1/8”-60” (137.4-152.4)12”-18” (30.4-45.0)18 1/8”-36” (46.0-91.4)36 1/8”-48” (91.7-121.9)48 1/8”-54” (122.2-137.1)54 1/8”-60” (137.4-152.4)12”-18” (30.4-45.0)18 1/8”-36” (46.0-91.4)36 1/8”-48” (91.7-121.9)48 1/8”-54” (122.2-137.1)54 1/8”-60” (137.4-152.4)18 1/8”-36” (46.0-91.4)36 1/8”-48” (91.7-121.9)48 1/8”-54” (122.2-137.1)54 1/8”-60” (137.4-152.4)18 1/8”-36” (46.0-91.4)36 1/8”-48” (91.7-121.9)48 1/8”-54” (122.2-137.1)54 1/8”-60” (137.4-152.4)18 1/8”-36” (46.0-91.4)36 1/8”-48” (91.7-121.9)48 1/8”-54” (122.2-137.1)54 1/8”-60” (137.4-152.4)12”-18” (30.4-45.0)18 1/8”-36” (46.0-91.4)36 1/8”-48” (91.7-121.9)12”-18” (30.4-45.0)18 1/8”-36” (46.0-91.4)36 1/8”-48” (91.7-121.9)

92.29 73.81 83.75

104.74 135.05 108.18

85.38 94.66

118.34 147.94 143.48 114.77 119.97 149.98 187.47 143.48 114.77 119.97 149.98 187.47

94.37 75.45 85.41

106.80 133.50 107.17 126.64 186.86 224.05 107.42

85.90 96.54

110.99 88.76

103.12 128.91 161.12 147.82 118.25 119.97 149.98 187.47 147.82 118.25 119.97 149.98 187.47 119.55 143.46 213.07 255.66 151.03 161.93 241.62 289.93 151.03 161.93 241.62 289.93 117.25

93.82 108.20 154.33 123.47 125.22

$

$

$ $ $ $ $ $$ $ $ $ $$$$ $ $$$ $ $$$$$ $ $$$$$$$$$$$$$$$$$$$$ $$$$$$$$$$$$$$$$

each

each

$ $ $ $ $ $$ $ $ $ $$$$ $ $ each each each each each each each each each each each each each each each each each each each each each each each each each each each each each each each each each each each each each each each each each each each each each

$$$$ $$ $ $$$$$$$$$$$$$$$ $$$ $ $$$$$$$$$$$$$ $$$$$$$$$ $$$$$$ $ $$$$ $ $$ $ $$


PARTNUMBER

LIST PRICE PER FOOT TYPE / SIZE DESCRIPTION


PARTNUMBER



365LS-G366LS-G

365EMI

367AA368AA

367D368D

367G368G

367M367MP369AA

370A370D370M375AA375D376AA376D381A383AA383D383FS-AA383FS-D398V399V400B

400Z

426A428A429A

452A469A470AA470D472AA475AA

475D

475G

475A-L477AA477D

477G478AA

478D

485A485D

154.34 123.47 125.22 220.81 278.70 336.60 145.07 111.58 128.31

166.38 131.98 151.81 166.38 131.98 151.81

3.27 5.71

127.2595.69

110.0214.8122.75

4.3816.1321.5710.8414.48

7.209.78

11.15 14.47 19.60

5.96 5.96 9.87

2.75

9.459.459.53

9.594.81

14.8719.5118.40

7.79

11.43

11.43

12.377.53

10.74

10.7410.97

14.68

5.288.09

48.5874.6414.3652.9270.7735.5647.5023.6332.0836.58 47.49 64.30 19.56 19.56 32.39

9.02

30.9930.9931.28

31.4615.7948.7864.0060.3725.57

37.50

37.50

40.5924.7235.23

35.2335.99

48.18

17.3226.54

12”-18” (30.4-45.0)18 1/8”-36” (46.0-91.4)36 1/8”-48” (91.7-121.9)18 1/8”-36” (46.0-91.4)36 1/8”-48” (91.7-121.9)48 1/8”-54”(122.2-137.1)12”-18” (30.4-45.0)18 1/8”-36” (46.0-91.4)36 1/8”-48” (91.7-121.9)

12”-18” (30.4-45.0)18 1/8”-36” (46.0-91.4)36 1/8”-48” (91.7-121.9)12”-18” (30.4-45.0)18 1/8”-36” (46.0-91.4)36 1/8”-48” (91.7-121.9)MiscellaneousMiscellaneous12”-18” (30.4-45.0)18 1/8”-36” (46.0-91.4)36 1/8”-48” (91.7-121.9) Gasketing Gasketing Gasketing Gasketing Gasketing Gasketing Gasketing Gasketing Meeting Stiles Meeting Stiles Meeting Stiles Meeting Stiles Meeting Stiles Meeting Stiles Window Protection

Window Protection

Gasketing Gasketing Gasketing

Door Sweep Threshold Gasketing Gasketing Gasketing Gasketing

Gasketing

Gasketing

Gasketing Door Sweep Door Sweep

Door Sweep Gasketing

Gasketing

Gasketing Gasketing

Gold AnodizedAutomatic Door BottomHeavy Duty / Low ForceIrridate finishAutomatic Door Bottom for EMI / RFI

Clear AnodizedAutomatic Door BottomHeavy Duty / High Sound

Dark Bronze Anodized Automatic Door BottomHeavy Duty / High SoundGold Anodized Automatic Door BottomHeavy Duty / High SoundHard Ferrite Magnet 1.5” x .46”x .36”Hard Ferrite Magnet / Steel PlateAluminum / Mortised Automatic Door BottomHeavy Duty / High SoundAluminum / Magnetic SealDark Bronze Anodized / Magnetic SealMagnetic StripsClear Anodized/ Magnetic/ Snap-On CoverDk Bronze Anod./ Magnetic/ Snap-On CoverClear Anodized / Neoprene / Snap-On CoverDk Bronze Anod./ Neoprene/Snap-On CoverAluminum / Double Neoprene LipClear Anodized / Double NeopreneDark Bronze Anodized / Double NeopreneClear Anodized / Neoprene / IntumescentDark Brown Anod./ Neoprene/ IntumescentSolid PVC Brown / Pile with Fin Seal / PSASolid PVC Brown / Neoprene lips/ PSABronze Side Jamb without Return Flange1 3/4” (44.5)Zinc Side Jamb without Return Flange1 3/4” (44.5)Aluminum / Neoprene for Door ClosersAluminum / Neoprene for Door ClosersAluminum with Neoprene Gasket for use with Coordinator or Closer BasketAluminum Track / NeopreneAluminum Assembly ConnectorClear Anodized Security Seal/ NeopreneDark Bronze Anod. Security Seal/ NeopreneClear Anodized Security Seal / NeopreneClear Anodized / Snap-On Cover /Neoprene / Compress O-Matic SealDark Bronze Anodized / Snap-On Cover /Neoprene / Compress O-Matic SealGold Anodized / Snap-On Cover /Neoprene / Compress O-Matic SealPhotoluminescent Head & Jamb SealClear Anodized/ Neoprene/ Snap-On CoverDark Bronze Anodized / Neoprene /Snap-On Cover Gold Anodized/ Snap-On Cover/ NeopreneClear Anodized / Snap-On Cover /Double Neoprene/ Compress-O-MaticDark Bronze Anodized / Snap-On Cover /Double Neoprene/ Compress-O-Matic Aluminum/ Neoprene Compress O-Matic Dark Bronze Anodized / Neoprene

Aluminum/ Neoprene Compress O-MaticAntibacterial Rubber / White / PSAIntumescent / Neoprene / PSASilicone Seal with PSA, black colorSilicone Seal with PSA, brown colorSilicone Seal with PSA, clearSilicone Seal with PSA, gray colorSilicone Seal with PSA, white colorBronze Side Jamb without Return Flange 2 1/8”(53.1)Zinc Side Jamb without Return Flange2 1/8”(53.1)Aluminum / Rubber 1/16”(1.6) thickClear Anodized / Double Neoprene /Sound Absorber for system #4482Aluminum/ Intumescent/ Flame Retardant Silicone, for undercut doorAluminum Threshold 1/2” (12.7) HighAluminum with Rubber InsertAluminum with Unfinished Oak InsertTraction Tread Rubber .365” (9.3)x .938”(23.8)Aluminum Butt Threshold 3” (76.2)Aluminum Butt Threshold 3”(76.2)/ NeopreneAluminum Thermal Break Threshold 5” (127.0) / NeopreneAluminum Thermal Break Threshold 6” (152.4) / NeopreneClear Anodized / Solid NeopreneDark Bronze Anodized / Solid NeopreneAluminum Handicap Threshold 4”(101.6)Aluminum Handicap Threshold 5”(127.0)Bronze Handicap Threshold 5”(127.0)Dark Bronze AnodizedHandicap Threshold 5”(127.0)Aluminum Handicap Threshold 6”(152.4)Aluminum Handicap Threshold 7”(177.8)Aluminum Handicap Threshold 8”(203.2) Clear Anodized / Neoprene InsertAdjustable Surface AstragalDark Bronze Anodized / Neoprene InsertAdjustable Surface AstragalClear Anodized/ Neoprene/ IntumescentAdjustable Surface AstragalDark Bronze Anodized / Neoprene Insert /Intumescent/ Adjustable Surface AstragalClear Anodized / Neoprene Insert /Adjustable Mortised Astragal Dark Bronze Anodized / Neoprene Insert /Adjustable Mortised Astragal Gold Anodized / Neoprene Insert /Adjustable Mortised Astragal Clear Anodized / Intumescent / NeopreneAdjustable Mortised Astragal Dark Bronze Anodized / Intumescent /Neoprene / Adjustable Mortised Astragal Gold Anodized / Intumescent / NeopreneAdjustable Mortised AstragalAluminum Rabbeted Threshold/ Neoprene5”(127.0) wide 7/8”(22.2) highAluminum Rabbeted Threshold/ Neoprene4 1/2”(114.3) wide 1” (25.4) highAluminum Rabbeted Threshold/ Neoprene3 9/16”(90.4) wide 7/8”(22.2) highAluminum Rabbeted Threshold/ Neoprene3 11/16”(84.9) wide 1/2”(12.7) high

Gasketing Gasketing Gasketing Gasketing Gasketing Gasketing Gasketing Gasketing Window Protection

Window Protection

Door Sweep Gasketing

Door Sweep

Threshold Threshold Threshold Threshold Threshold Threshold Threshold

Threshold

Gasketing Gasketing Threshold Threshold Threshold Threshold

Threshold Threshold Threshold Meeting Stile Meeting Stile

Meeting Stile

Meeting Stile

Meeting Stile

Meeting Stile

Meeting Stile

Meeting Stile

Meeting Stile

Meeting Stile

Threshold Threshold

Threshold

Threshold

8.09 1.41 2.55 1.29 1.29 1.29 1.29 1.29

10.81

3.60

10.239.35

20.16

6.40 9.27 9.27 5.90

14.02 16.07 23.37

25.70

8.66 13.00

9.35 11.19 44.43 22.10

14.43 16.91 21.72 19.04

27.92

25.28

30.86

19.04

27.49

27.49

24.13

32.92

32.92

16.49

17.65

13.12

9.55

485G488BIO488FS488S-Bk488S-Br488S-Cl488S-Gy488S-Wh500B

500Z

511A520AA

521FS AA

522A522AR522AW522R523A524A525A

526A

539AA539D544A545A545B545D

546A547A548A555AA

555D

555FS-AA

555FS-D

557AA

557D

557G

557FS-AA

557FS-D

557FS-G

560A

561A

563A

564A

26.54 4.64 8.38 4.22 4.22 4.22 4.22 4.22

35.46

11.82

33.5830.68

66.13

20.99 30.42 30.42 19.37 46.01 52.74 76.67

84.33

28.40 42.64 30.66 36.71

145.77 72.52

47.34 55.48 71.27 62.46

91.62

82.94

101.25

62.46

90.21

90.21

79.17

108.00

108.00

54.11

57.90

43.03

31.35

$$$$$$$$$

$$$$$$$$$$$$$$$$$$$$$$$$$$

$

$$$

$$$$$$

$

$

$$$

$$

$

$$

$ $ $ $ $ $ $ $ $ $ $ $

$ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $

$

$

$

$

$

$

$

$

$

$

$ $ $ $ $ $ $ $ $ $ $ $

$ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $

$

$

$

$

$

$

$

$

$

$

eacheacheach eacheacheacheacheacheach

eacheacheacheacheacheacheacheacheacheacheach$$$$$$$$$$$$$$$

$

$$$

$$$$$$

$

$

$$$

$$

$

$$


PARTNUMBER



PARTNUMBER TYPE DESCRIPTION

LIST PRICE PER FOOT


Aluminum 3 1/2” (88.9) Wide / PVCThermal Break / Unfinished Oak Insert Aluminum 4 1/2”(114.3) Wide with PVCThermal Break / Rubber Insert Aluminum 4 1/2”(114.3) Wide with PVCThermal Break / Unfinished Oak Insert Aluminum 5 5/8”(142.9) Wide with PVCThermal Break / Rubber Insert Aluminum 5 5/8”(142.9) Wide with PVCThermal Break / Unfinished Oak Insert Aluminum 7 5/8” (193.7) Wide with PVCThermal Break / Rubber Insert Aluminum 7 5/8” (193.7) Wide with PVCThermal Break / Unfinished Oak Insert Aluminum 6 5/8” (168.3) Wide with PVCThermal Break / Rubber InsertAluminum 6 5/8” (168.3) Wide with PVCThermal Break / Unfinished Oak Insert Clear Anodized / Adjustable Sound SealNeoprene/ Compress O-MaticDark Bronze Anodized / Adjustable Sound Seal/ Neoprene Compress O-MaticIrridate Finish Adjustable Head and JambClear Anodized / Intumescent Fire Stop Neoprene / Compress O-MaticDark Bronze Anodized / IntumescentFire Stop / Neoprene / Compress O-MaticGold Anodized / Intumescent Fire Stop / Compress O-MaticStrike Plate Bracket Steel Prime. Must be purchased with related Zero item.Steel Primed Adjustable Sound Sealfor Cased Opening Fire RatedStainless Steel Adjustable Sound Sealfor Cased Opening, Fire RatedClosed Cell Neoprene/ Bumper Type/ PSA.625”(15.9) x .625”(15.9)Closed Cell Neoprene/ Bumper Type/ PSA.750”(19.1) x .625”(15.9)Closed Cell Neoprene/ Bumper Type/ PSA1.00”(25.4) x .500”(12.7)Closed Cell Neoprene/ Bumper Type/ PSA1.250”(31.8) x .625”(15.9)Neoprene Seal with PSAClosed Cell Neoprene Seal with PSASteel Primed “L” Shaped/ 40625500PSA/ #375A for Cased Openings / Fire Rated Clear Anodized / Neoprene / AdjustableDark Bronze Anodized / Neoprene /AdjustableStrike Plate Bracket Steel Prime 6”(152) wide.Must be purchased with related Zero item.Clear Anodized / Pile Brush / AdjustableDark Bronze Anodized / Pile Brush / Adjustable Clear Anodized / Neoprene Lip / AdjustableFire Plug for ZBB hingesAluminum AstragalAluminum Plate with 2 Steel Pins forFire Rated Doors. Template requiredClear Anodized / Edge Mount /Continuous Unigear / Short LeafDark Bronze Anodized / Edge MountContinuous Unigear / Short LeafClear Anodized / Double Bearing / EdgeMount / Continuous Unigear / Short Leaf Dark Bronze Anodized / Double BearingEdge Mount / Continuous Unigear / Short LeafClear Anodized/ Edge Mount/Continuous UnigearDark Bronze Anodized / Edge Mount / Continuous Unigear

15.67

18.35

18.35

27.41

27.41

32.42

32.42

34.19

34.19

25.10

31.27

69.15 37.37

43.68

43.68

32.38

34.75

65.50

2.53

3.78

4.40

5.35

1.190.98

28.63

15.6023.3330.91

15.6023.3315.6013.39

7.2013.92

13.82

20.42

19.45

27.79

14.85 21.93

Bronze Rabbeted Threshold / Neoprene3 11/16”(84.9) wide 1/2”(12.7) highDark Bronze Anodized / Neoprene3 11/16”(84.9) wide 1/2”(12.7) highAluminum Rabbeted Threshold 4 7/8”(123.8) / Neoprene Stop 7/8” (22.2)Bronze Rabbeted Threshold 4 7/8” (123.8) / Neoprene Stop 7/8” (22.2)Aluminum Rabetted Threshold 5”(12.7) Neoprene Stop 1/2” (12.7)Bronze 1/2” (12.7) High Rabbeted Threshold 5”(127.0) WideAluminum 1/2” (12.7) HighRabbeted Threshold 6” (152.4) WideClear Anodized / Self-Adjusting /Neoprene / Compress-O-MaticClear Anodized/ Self Adjusting/Neoprene LipAluminum Cover Plate Wide max. 48”(1219.2) x 1/8”(3.2) thickAluminum Cover PlateWide max. 48”(1219.2) x 1/4”(6.4) thickAluminum Butt Threshold 2” (50.8)Aluminum Butt Threshold 3” (76.2)Aluminum / Thermal Break / 4” (101.6) Aluminum / Thermal Break / 5” (127.0)Aluminum / Thermal Break / 6” (152.4) Aluminum / Neoprene / 2” (50.8) wideAluminum / Neoprene / 3” (76.2) wide Sash Chain Copper Dip 100 lb. weight ratedAluminum / Solid Neoprene Dark Bronze Anodized / Solid Neoprene Aluminum / Carpet Divider / 3”(76.2) wideSash Chain Copper Dip 500 lb. weight ratedAluminum Threshold 3” (76.2) wideAluminum Threshold 4” (101.6) wideBronze Threshold 4” (101.6) wideAluminum Threshold 5” (127.0) wideBronze Threshold 5” (127.0) wideAluminum Threshold 6” (152.4) wideBronze Threshold 6” (152.4) wideAluminum Threshold 7” (177.8) wideBronze Threshold 7” (177.8) wideAluminum Plate 3” (76.2) wideAluminum Custom Fabricated BulkheadSteel Custom Fabricated Bulkhead Stainless Steel Custom Fabricated Series, Flush Mounted Aluminum ExpansionJoint (See Part # 84, 672, Variable Plates)Series, Aluminum Expansion Joints (See Catalog Part # 268, 673, 84, 663)Aluminum Plate 2” (50.8) wideBronze Plate 2” (50.8) wideAluminum Plate 3” (76.2) wideBronze Plate 3” (76.2) wide Aluminum Plate 4” (101.6) wideBronze Plate 4” (101.6) wideAluminum Plate 5” (127.0) wideAluminum Plate 6” (152.4) wideBronze Plate 6” (152.4) wideAluminum Plate 8” (203.2) wideClear Anodized / Adjustable /Spring Loaded / Neoprene InsertDark Bronze Anodized / Adjustable /Spring Loaded / Neoprene InsertAluminum 3 1/2” (88.9) Wide / PVCThermal Break / Rubber Insert

Threshold

Threshold

Threshold

Threshold

Threshold

Threshold

Threshold

Gasketing

Meeting Stile Threshold

Threshold

Threshold Threshold Threshold Threshold Threshold Threshold Threshold Window Protection Door Sweep Door Sweep Threshold Window Protection Threshold Threshold Threshold Threshold Threshold Threshold Threshold Threshold Threshold Threshold Threshold Threshold Threshold Threshold

Threshold Threshold Threshold Threshold Threshold Threshold Threshold Threshold Threshold Threshold Threshold Gasketing

Gasketing

Threshold

166.66

62.70

70.35

395.86

44.00

174.33

50.48

39.48

39.48

20.99 29.78 46.46 55.24 62.89 25.95 34.53

40.5254.9935.21

32.5041.65

183.8849.86

253.3059.00

330.0684.57

502.8826.46

25.71 157.88

37.43 189.36

50.73 265.16

60.40 73.05

517.21 101.01

62.46

91.62

51.41

564B

564D

565A

565B

566A

566B

568A

570AA

571AA600CP

601CP

622A623A624A625A626A627A628A635639WA639WD643A645653A654A654B655A 655B656A656B657A657B663A669DP-A669DP-S669DP-STST670

671

672A672B673A673B674A674B675A676A676B678A712AA

712D

722AR

722AW

723AR

723AW

724AR

724AW

726AR

726AW

729AR

729AW

770AA

770D

770EMI770FS-AA

770FS-D

770FS-G

770SPB

770SP

770STST

810

811

812

813

824N826N837SP

870AA870D870SPB

871AA871D873AA903FS905A905HFP

908AA

908D

908DB-AA

908DB-D

910AA910D

50.80

19.11

21.44

120.65

13.41

53.13

15.39

12.03

12.034.36

8.19

6.40 9.08

14.16 16.84 19.17

7.91 10.52

165.6012.3516.7610.73

256.10 10.30 13.20 58.29 15.80 80.29 18.70

104.62 26.81

159.40 8.39 CALL

CALL CALL CALL

CALL

7.83 48.12 11.41 57.71 15.46 80.82 18.41 22.26

157.64 30.79 19.04

27.92

15.67

Threshold

Threshold

Threshold

Threshold

Threshold

Threshold

Threshold

Threshold

Threshold

Gasketing

Gasketing

Gasketing Gasketing

Gasketing

Gasketing

Gasketing

Gasketing

Gasketing

Gasketing

Gasketing

Gasketing

Gasketing

Gasketing Gasketing Gasketing

Gasketing Gasketing Miscellaneous

Meeting Stile Meeting Stile Meeting Stile Miscellaneous Gasketing Miscellaneous Hinge

Hinge

Hinge

Hinge

Hinge Hinge

51.41

60.19

60.19

89.93

89.93

106.37

106.37

112.17

112.17

82.36

102.61

226.88 122.62

143.33

143.33

114.01

214.90

8.29

12.40

14.45

17.55

3.913.21

93.93

51.1876.55

51.1876.5551.18

23.63

45.33

67.01

63.82

91.17

48.71 71.94

$

$

$

$

$

$

$

$

$$

$

$$$$$$$$$$$$$$$$$$$$$$

$$$$$$$$$$$

$

$

$

$

$

$

$

$

$

$

$/inc. /ft.

/inc. /ft.

$$$$$$$/100 ft.$$$/100 ft.$$$$$$$$$$

$$$$$$$$$$$

$

$

$

$

$

$

$

$

$

$ $ $ $

$ $ $

$

each

$

$

$ $

$

$

$ $ $

$ $ each $ $ $ each $ each

$ $ $

$

$ $

$

$

$

$

$

$

$

$

$ $ $

$ $ $

$

$

$

$

$

$

$ $

$ $ $ $ $ $ $ $ $ $ $ $

$ $ $

$

$ $


PARTNUMBER



PARTNUMBER



910DB AA

910DB D

911AA

911D

911DB-AA

911DB-D

913STST

914AA

914D

914DB-AA

914DB-D

916STST

917STST

918STST

919SP

919STST

920AA

920D

920DB-AA

920DB-D

921AA

921D

921DB-AA

921DB-D

922AA

922D

922DB-AA

922DB-D

925AA925D

925DB-AA

925DB-D

926N

Hinge

Hinge

Hinge

Hinge

Hinge

Hinge

Hinge

Hinge

Hinge

Hinge

Hinge

Hinge

Hinge

Hinge

Hinge

Hinge

Hinge

Hinge

Hinge

Hinge

Hinge

Hinge

Hinge

Hinge Hinge

Hinge

Hinge

Hinge

Hinge Hinge

Hinge

Hinge

Gasketing

Clear Anodized / Double BearingEdge Mount / Continuous Unigear Dark Bronze Anodized / Double BearingEdge Mount / Continuous Unigear Clear Anodized / Edge MountSecurity Fire Rated Unigear HingeDark Bronze Anodized / Edge MountSecurity Fire Rated Continuous UnigearClear Anodized / Double Bearing / Edge Mount /Security Fire Rated / Continuous Unigear Dark Bronze Anodized / Double Bearing / EdgeMount/ Security Fire Rated / Continuous Unigear Stainless Steel / Continuous Unipin /Half Surface / Thru boltClear Anodized / Edge Mount /Continuous Unigear Dark Bronze Anodized / Edge Mount /Continuous Unigear Clear Anodized / Double Bearing /Edge Mount / Continuous UnigearDark Bronze Anodized / Double Bearing /Edge Mount / Continuous UnigearStainless Steel / Continuous Unipin /Full Surface / Thru boltStainless Steel / Continuous UnipinStainless Steel Pin Ø 1/4”(6.4)Stainless Steel / Continuous Unipin /Edge Mount with Hinge GuardStainless Steel Pin Ø 1/4”(6.4) Steel Prime / Continuous Unipin Stainless Steel Pin Ø 1/4”(6.4)Stainless Steel / Continuous UnipinStainless Steel Pin Ø 1/4”(6.4)Clear Anodized / Half-SurfaceContinuous UnigearDark Bronze Anodized /Half-Surface / Continuous UnigearClear Anodized / Double Bearing /Half-Surface / Continuous UnigearDark Bronze Anodized / Double BearingHalf-Surface / Continuous UnigearClear Anodized / Snap-on Cover/ Thru BoltHalf-Surface / Continuous UnigearDark Bronze Anodized / Snap-on Cover /Thru Bolt / Half-Surface / Continuous UnigearClear Anodized/ Double Bearing /Snap-on Cover/ Thru Bolt / Half-Surface / Continuous UnigearDark Bronze Anodized/ Double Bearing/ Snap-onCover/ Thru Bolt/ Half-Surface/ Continuous UnigearClear AnodizedHalf Edge Mount / Continuous Unigear Dark Bronze AnodizedHalf Edge Mount / Continuous UnigearClear Anodized / Double Bearing /Half Edge Mount / Continuous Unigear Dark Bronze Anodized/ Double BearingHalf Edge Mount / Continuous UnigearClear Anodized/ Half Surface/ Continuous UnigearDark Bronze AnodizedHalf Surface / Continuous UnigearClear Anodized / Double BearingHalf Surface / Continuous UnigearDark Bronze Anodized / Double BearingHalf Surface / Continuous UnigearClosed Cell Sponge Neoprene / PSA .375”(9.5) x .185”(4.7)

Clear Anodized/ Half SurfaceContinuous Unigear / Short LeafDark Bronze Anodized/ Half SurfaceContinuous Unigear / Short LeafClear Anodized / Double Bearing / Half Surface/ Continuous Unigear/ Short LeafDark Bronze Anodized/ Double BearingHalf Surface/ Continuous Unigear/ Short LeafClear Anodized/ Snap-on Cover/ Thru Bolt Full Surface / Continuous UnigearDark Bronze Anodized / Snap-on Cover /Thru Bolt / Full Surface Continuous UnigearClear Anod./ Double Bearing/ Snap-on Cover/ Thru Bolt/ Full Surface / Continuous UnigearDark Bronze Anodized/ Double BearingSnap-on Cover / Thru BoltFull Surface / Continuous UnigearClear Anodized / Snap-on Cover / Thru BoltFull Surface / Continuous UnigearDark Bronze Anodized / Snap-on Cover / Thru Bolt Full Surface / Continuous UnigearClear Anod./ Double Bearing/ Snap-on Cover/Thru Bolt/ Full Surface/ Continuous UnigearDark Bronze Anodized / Double Bearing Snap-on Cover / Thru BoltFull Surface / Continuous UnigearClear Anodized / Thru Bolt / Short LeafFull Surface / Continuous UnigearClear Anodized / Double Bearing / Full Surface / Continuous Unigear/ Short Leaf2-Ply Cloth-Lined RubberCover for mortise type hinge.BioWall Antibacterial rubber, whiteBioWall Antibacterial rubber, whiteBioWall Antibacterial rubber, whiteBioWall Antibacterial rubber, whiteRoller Finger Protection. Black Blind. 76” LRoller Finger Protection. White Blind. 76” LSecurity and Control SystemRadioactive Dust Protection SystemU-Shoe Suspension IsolatorsSound Trap Insulator - PrimarySound Trap Insulator - SecondaryStructural Silencing Tape, Grey, PSASound Trap Insulator System (#1033 & #1043)Photoluminescent - Exit. 2”(50.7) widePhotoluminescent - Exit. 1”(25.4) widePhotoluminescent - Side Edge-LeftPhotoluminescent - Side Edge-RightPhotoluminescent Door Marking - Latch typePhotoluminescent Door Marking - Bar typePhotoluminescent - Exit. 1”(25.4) wide with Aluminum extrusionPhotoluminescent Signage -Progress to the RightPhotoluminescent Signage -Progress Down and to the RightPhotoluminescent Signage -Progress Up and to the RightPhotoluminescent Signage -Progress to the LeftPhotoluminescent Signage -Progress Down and to the LeftPhotoluminescent Signage -Progress Up and to the Left

Hinge

Hinge

Hinge

Hinge

Hinge

Hinge

Hinge

Hinge

Hinge

Hinge Hinge

Hinge

Hinge

Hinge

Gasketing Finger Guard Finger Guard Finger Guard Finger Guard Finger Guard Finger Guard Finger Guard Gasketing Gasketing Miscellaneous Miscellaneous Miscellaneous Miscellaneous Miscellaneous Stairway Marking Stairway Marking Stairway Marking Stairway Marking Stairway Marking Stairway Marking Stairway Marking Stairway Marking

Stairway Marking Stairway Marking

Stairway Marking

Stairway Marking

Stairway Marking

25.78

35.34

33.37

45.11

22.41

30.82

28.17

39.23

28.35

38.87

36.71

49.61

25.78

33.37

41.0210.3513.5811.5215.9813.29

1.98 3.57 3.57

44.03 7.13 8.90 4.48 4.91 4.91

15.35 24.89

8.78

25.54

25.54

25.54

25.54

25.54

25.54

928AA

928D

928DB-AA

928DB-D

930AA

930D

930DB-AA

930DB-D

935AA

935D

935DB-AA

935DB-D

936AA

936DB-AA

948951971AA-BIO972AA-BIO973AA-BIO974AA-BIO975A-Bk975A-Wh101010121020R103310431050R10531200120112021203120712081214

1220

1221

1222

1223

1224

1225

20.89

29.90

25.01

32.45

31.06

40.43

74.53

17.38

26.29

25.09

35.83

71.30

87.19

95.06

31.37

62.41

14.85

21.93

20.89

29.90

20.57

31.55

31.59

43.04

15.61

22.99

21.92

31.39

19.93 29.54

29.56

40.29

81.88

68.54

98.09

82.07

106.47

101.90

132.66

244.52

57.01

86.24

82.31

117.57

233.93

286.06

311.90

102.93

204.77

48.71

71.94

68.54

98.09

67.48

103.53

103.66

141.23

51.21

75.42

71.92

102.98

65.39 96.93

96.98

132.20

84.57

115.96

109.49

147.99

73.54

101.11

92.43

128.72

93.03

127.52

120.44

162.77

84.57

109.49

134.5933.9744.5437.7852.4143.59

111.55111.55

11.70 11.70

23.41 29.21 14.71

28.81

$

$

$

$

$

$

$

$

$

$

$

$

$

$

$

$

$

$

$

$

$

$

$

$

$

$

$

$ $ $

$

$ per 50 ft. (15.24m)

$

$

$

$

$

$

$

$

$

$

$

$

$

$

$

$

$

$

$

$

$

$

$

$

$

$

$

$ $ $

$

$ $

$

$

$

$

$

$

$

$

$

$

$

$

$

$

$ $ $ $ $ $ $ 34.00 $ 34.00 CALL CALL $ $ $ $ $ $ $ $ $ $ $ $

$

$ $

$

$

$

$

$

$

$

$

$

$

$

$

$

$

$

$

$

$ $ $ $ $ $ $ $ each $ $/ 75 ft. $ $ $ each each each each $

each

each each

each

each

each


PARTNUMBER




LIST PRICE PER FOOT


Aluminum/ Mortised/ Regular Duty / NeopreneAluminum/ Mortised/ Regular Duty/ BrushClear Anodized/ Mortised Adjustable Astragal/Neoprene / Intumescent Fire StopDark Bronze Anodized / Mortised Adjustable /Neoprene / Intumescent Fire StopGold Anodized / Mortised Adjustable Astragal /Neoprene / Intumescent Fire StopAluminum 2”(50.8) Traction Tread Plate/ RubberAluminum 2”(50.8) Traction Tread Plate/ EpoxyAluminum 2”(50.8) Traction Tread Plate / Epoxy/ Photoluminescent Tread insertAluminum 2”(50.8) Traction Tread Plate / Rubber / Photoluminescent Tread InsertAluminum 3”(76.2) Traction Tread Plate / Rubber insertAluminum 3”(76.2) Traction Tread Plate / Epoxy insertAluminum 3”(76.2) Traction Tread Plate /Epoxy / Photoluminescent Tread insertAluminum 3”(76.2) Traction Tread Plate /Rubber / Photoluminescent Tread insert Aluminum 4”(101.6) Traction Tread Plate / Rubber insertAluminum 4”(101.6) Traction Tread Plate / Epoxy insertAluminum 4”(101.6) Traction Tread Plate /Epoxy / Photoluminescent Tread insert Aluminum 4”(101.6) Traction Tread Plate / Rubber / Photoluminescent Tread insert Aluminum 5”(127.0) Traction Tread Plate / Rubber insertAluminum 5”(127.0) Traction Tread Plate / Epoxy insertAluminum 5”(127.0) Traction Tread Plate /Epoxy / Photoluminescent Tread insert Aluminum 5”(127.0) Traction Tread Plate/Rubber / Photoluminescent Tread insert Aluminum 6”(152.4) Traction Tread Plate/Rubber / Photoluminescent Tread insertAluminum 6”(152.4) Traction Tread Plate /Epoxy insertAluminum 6”(152.4) Traction Tread Plate/Epoxy / Photoluminescent Tread insertAluminum 6”(152.4) Traction Tread Plate /Rubber / Photoluminescent Tread insertClear Anodized / Magnet / Sound TrapClosed Cell Neoprene, Black 1”(25.4) x 4”(10.2) Clear Anodized / Neoprene / Sound Trap Aluminum / Double NeopreneBronze Side Jamb without Return Flange 1 3/4”Zinc Side Jamb without Return Flange 1 3/4”Window / Wall Partition - Sound Trap Vision Lite - Sound TrapVision Lite - Sound TrapBronze Side Jamb without Return FlangeZinc Side Jamb without Return FlangeClear Anodized / Neoprene / PSAClear Anodized / Neoprene / Intumescent / PSADark Bronze Anodized / Neoprene / PSADark Bronze Anod./ Neoprene/ Intumet/ PSAGold Anodized / Neoprene / PSAGold Anodized / Neoprene / Intumescent / PSAClear Anodized / Brush / PSAClear Anodized / Poly Brush / Intumescent / PSADark Bonze Anodized / Poly Brush / PSADark Bronze Anod./ Poly Brush/ Intumescent/ PSAGold Anodized / Poly Brush / PSA

Photoluminescent Signage - Progress ForwardPhotoluminescent Signage - Progress DownPhotoluminescent Door Sign - FINAL EXITPhotoluminescent Door Sign -EXIT, Left ArrowPhotoluminescent Door Sign -EXIT, Right ArrowPhotoluminescent Door Sign EXIT - pictogramPhotoluminescent Door Kit for 3’ x 7’ doorPhotoluminescent Door Kit for 4’x 8’ doorAluminum with NeopreneDark Bronze Anodized / NeopreneAluminum Butt Threshold 2 1/2” (63.5)Bronze Butt Threshold 2 1/2” (63.5)Dark Bronze Anodized Threshold 2 1/2”(63.5)Aluminum Butt Threshold3” (76.2) Wide x 1/2” (12.7) HighAluminum Threshold One Side Beveled 4”(101.6) x 1/2”(12.7) HighBronze Threshold One Side Beveled 4”(101.6) x 1/2”(12.7) HighAluminum Threshold One Side Beveled5”(127.0) x 1/2”(12.7) HighCarpet Divider Threshold 1 3/4” (44.5)Bronze Carpet Divider1 3/4”(44.5) x 1/2”(12.7)Aluminum Carpet Divider 4”(101.6)Rubber Carpet Divider Threshold 2.5”(63.5)Rubber Carpet Divider Threshold 1.813”(46.1)Clear Anodized Interior Astragal - NeopreneDark Bronze Interior Astragal - NeopreneFlood Barrier Shield 10” highFlood Barrier Shield 20” highFlood Barrier Shield 24” highFlood Barrier Shield 30” highFlood Barrier Shield 36” highFlood Barrier Shield 42” highSponge Neoprene Seal U-shape .500”(12.7)Aluminum Ramp 3.94”(100.1) x .500”(12.7)Poly Pile Dust Plug, Self Adhesive Aluminum 3”(76.2) Traction Tread Nosing-RubberAluminum 3”(76.2) Traction Tread Nosing- EpoxyAluminum 3”(76.2) Traction Tread Nosing - Epoxy / Photoluminescent insertAluminum 3”(76.2) Traction Tread Nosing -Rubber / Photoluminescent insert Bronze 3”(76.2) Traction Tread Nosing - RubberBronze 3”(76.2) Traction Tread Nosing - EpoxyAluminum 6”(152.4) Traction Tread Nosing-RubberAluminum 6”(152.4) Traction Tread Nosing-EpoxyAluminum 6”(152.4) Traction Tread Nosing Epoxy / Photoluminescent insertAluminum 6”(152.4) wide Stair Nosings with Rubber / Photoluminescent insertAluminum / Traction Tread Rubber 2” x 3/8”Series, Compress-O-Matic (Part #328, 326)Clear Anodized / Mortised Adjustable Astragal /Neoprene / Intumescent Fire StopDark Bronze Anodized / Mortised Adjustable /Neoprene / Intumescent Fire StopGold Anodized / Mortised Adjustable Astragal /Neoprene / Intumescent Fire StopAluminum/ Mortised/ Handed/ Neoprene Aluminum / Mortised / Handed / Brush Automatic Door Bottom / Regular Duty FLO option availableAluminum/ Mortised/ Brush. FLO opt. availableAluminum/ Mortised/ NeopreneFLO option available

Stairway Marking Stairway Marking Stairway Marking Stairway Marking Stairway Marking Stairway Marking Stairway Marking Stairway Marking Gasketing Gasketing Threshold Threshold Threshold Threshold

Threshold

Threshold

Threshold Threshold Threshold Threshold Threshold Threshold Meeting Stile Meeting Stile Miscellaneous Miscellaneous Miscellaneous Miscellaneous Miscellaneous Miscellaneous Gasketing Threshold Miscellaneous Threshold Threshold Threshold

Threshold Threshold Threshold Threshold Threshold Threshold Threshold

Threshold Gasketing Meeting Stile

Meeting Stile

Meeting Stile

Door Bottom18 1/8”-36” (46.0-91.4) 36 1/8”-48” (91.7-121.9)48 1/8”-54” (122.2-137.1) Door Sweep Door Sweep

30.10 40.25 23.21

133.35 72.54 43.31

61.12

316.42

70.55

21.64 116.21

48.23 72.88 72.88 33.24 44.99

224.42 403.96 501.75 617.69 741.20 840.48

6.64 38.53 14.08 74.82

144.27 188.90

144.27

296.75 372.17 140.98 283.25 366.27

283.25

55.16

114.55

137.55

137.55

22.4722.47

122612271228123012311232123712481370A1370D1545A1545B1545D1673A

1674A

1674B

1675A

1682A1682B1684A 1685R1686R1840AA1840D2070A-102070A-202070A-242070A-302070A-362070A-422070N2361AA25412673A2673A-E2673A-E-L

2673A-L

2673B2673B-E2676A2676A-E2676A-E-L

2676A-L

269230003056FS-AA

3056FS-D

3056FS-G

35413542

35443546

355135523557FS-AA

3557FS-D

3557FS-G

3672A3672A-E3672A-E-L

3672A-L

3673A

3673A-E

3673A-E-L

3673A-L

3674A

3674A-E

3674A-E-L

3674A-L

3675A

3675A-E

3675A-E-L

3675A-L

3676A

3676A-E

3676A-E-L

3676A-L

3708AA3708N3709AA3831A4000B4000Z4482448344845000B5000Z5831AA5831FS-AA5831D5831FS-D5831G5831FS-G5832AA5832FS-AA5832D5832FS-D5832G

25.54 25.54 70.61 63.24 63.24 41.75

152.88 222.98

9.1712.27 7.07

40.64 22.11 13.20

18.63

96.44

21.50

6.59 35.42 14.70 22.21 22.21 10.13 13.71 68.40

123.12 152.92 188.26 225.91 256.17

2.02 11.74

4.29 22.80 43.97 57.57

43.97

90.45 113.43

42.97 86.33

111.63

86.33

16.81

34.91

41.92

41.92

53.6460.7974.52

6.856.85

34.91

41.92

41.92

13.82 28.80 37.35

28.80

20.48

42.24

55.14

42.24

27.41

56.32

73.50

56.32

33.54

69.26

91.89

69.26

40.41

85.14

110.96

85.14

25.77 4.23

25.77 9.52 9.61 2.68

35.89 30.70 11.08

11.26 3.72 5.16

7.49 6.45 8.95 6.45 8.95 5.31 7.69 6.45 8.95 6.45

Door Bottom Door Bottom Meeting Stile

Meeting Stile

Meeting Stile

Threshold Threshold Threshold Threshold Threshold Threshold

Threshold Threshold

Threshold Threshold Threshold Threshold

Threshold

Threshold Threshold

Threshold Threshold

Threshold

Threshold

Threshold

Gasketing Gasketing Gasketing Gasketing Window Protection Window Protection System System System Window Protection Window Protection Gasketing Gasketing Gasketing Gasketing Gasketing Gasketing Gasketing Gasketing Gasketing Gasketing Gasketing

114.55

137.55

137.55

45.33 94.48

122.53

94.48

67.21

138.60

180.93

138.60

89.93

184.80

241.16

184.80

110.04

227.26

301.48

227.26

132.60

279.35

364.06

279.35

84.55 13.87 84.55 31.22

31.54 8.79

117.74 100.73

36.34 36.95 12.20 16.93 24.57 21.16 29.36 21.16 29.36 17.41 25.24 21.16 29.36 21.16

$ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $

$

$ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $

$ $ $ $ $ $ $

$ CALL $

$

$

see price for #354 $ $ $ $ $

each each each each each each each each $ $ $ $ $ $ $

$

$ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $

$ $ $ $ $ $ $

$ $

$

$

eacheacheach$$

see price for #355 see price for #3542 $

$

$ $ $ $ $ $

$ $ $

$ $ $ $ $ $ $

$ $ $ $

$

$ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $

$

$

$ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $

$ $ $ $

$ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $


PARTNUMBER



PARTNUMBER



Gold Anodized / Poly Brush / IntumescentClear Anodized / Neoprene / PSADark Bronze Anodized / Neoprene / PSAGold Anodized / Neoprene / PSAAluminum Handicap 7”(177.8) x .500”(12.7)Aluminum Threshold 7.5” (190.5)Rubber Mat .375” (9.5) x 2.063”(52.4)Aluminum Plate 10” (254.0)Brass / Adj. Interlocking w/ #7336 or 7337Brass / Adjustable Interlocking / NeopreneBrass/ Adj. Interlocking/ Neoprene/ ThermalBrass / Adjustable Interlocking / ThermalBrass / Interlocking - Extension LegBrass / Adjustable Interlocking 4” (101.6)Brass / Adjustable Interlocking 5”(127)Brass / Adjustable interlocking 6.2” (157.5)Brass / Adjustable interlocking 7.2” (182.9)Aluminum / MortisedAutomatic Door Bottom for Sliding Doors

Clear Anodized, Adjustable Sound SealDark Bronze Anod., Adjustable Sound SealGold Anodized, Adjustable Sound SealNeoprene Kerf SealSilicone Kerf Seal / Black / PSASilicone Kerf Seal / BlackNeoprene Kerf SealRubber Seal for overhead doorNeoprene Kerf Seal / BlackKerf Sponge SealKerf SealKerf Pressure Seal, Silicone Black ø .250”Kerf Pressure Seal, Silicone White ø .250”Kerf Pressure Seal, Silicone Black ø .375”Kerf Pressure Seal, Polyvinyl White ø .438”Neoprene SealPVC/ Silicone Opaque/ PSA for 3/8” glass door. Corner Protector 1/2”(12.7) x 1/2”(12.7)PVC/ One side PSACorner Protector 1/2”(12.7) x 1/2”(12.7)PVC/ Two sides PSACorner Protector 1 1/8”(28.6) x 1 1/8”(28.6)PVC/ Two sides PSAPolycarbornate Seal / Brush .394”(10)Pile brush, grey colorPolycarbornate Seal / Brush .472”(12)Polycarbornate Seal / Brush .590”(15)Silicone / Batwing Type / Black / PSASilicone / Batwing Type / White / PSAIntumescent Batwing Type Seal / PSASilicone / Black / PSAClear Anodized / Brush / MortisedSilicone, black, PSAAluminum / NeoprenePolyvinyl chlorinated, black, PSANeoprene/ PSA .250”(6.4) x .125”(3.2)Clear Anodized / NeopreneDark Bronze Anodized/ NeopreneGold Anodized / NeopreneClear Anodized / .625” long BrushClear Anodized / Brush / AdhesiveDark Bronze Anodized / .625” long Brush

5832FS-G5833AA5833D5833G6570A6575A6679R6710A7000B7001B7002B7003B7332B7334B7335B7336B7337B7350A

7770AA7770D7770G8004N8042S-Bk8043N8046R8047R8048S-Bk8052N8053Q8054S-Bk8054S-Wh8055S-Bk8056Y-Wh8116N81308131 PSA

8132 PSA

8133 PSA

81368136P-Gy813781388144S-Bk8144S-Wh8144FS8145S-Bk8149AA8150S-Bk8151AA8160Y-Bk8172N8191AA8191D8191G8192AA8192AA-PSA8192D

8.95 5.16 6.45 6.45

26.81 30.31 11.62 38.62 91.65

111.31 110.43

86.19 45.85 91.72

114.65 183.37 206.30

65.60 49.59 52.83 66.00 82.58 25.71

32.83 32.83 1.93 1.56 2.19 1.99 4.04 1.87 1.87 1.99 2.49 2.49 2.94 2.94 1.76 8.87 3.53

4.07

4.45

6.77 1.81 6.88 7.89 2.68 2.68 3.43 1.70 5.79 1.99 5.98 3.03

74.60 5.75 7.88 7.88 4.43 5.73

6.12

Gasketing Gasketing Gasketing Gasketing Threshold Threshold Threshold Threshold Threshold Threshold Threshold Threshold Threshold Threshold Threshold Threshold Threshold12”-18” (30.4-45.0)18 1/8”-36” (46.0-91.4)36 1/8”-48” (91.7-121.9)48 1/8”-54” (122.2-137.1)54 1/8”-60” (137.4-152.4) Gasketing Gasketing Gasketing Gasketing Gasketing Gasketing Gasketing Gasketing Gasketing Gasketing Gasketing Gasketing Gasketing Gasketing Gasketing Meeting Stile Door Sweep Miscellaneous Miscellaneous Miscellaneous Meeting Stile Meeting Stile Meeting Stile Gasketing Gasketing Gasketing Gasketing Gasketing Gasketing Gasketing Door Sweep Gasketing Gasketing Gasketing Gasketing Gasketing Door Sweep Meeting Stile Door Sweep

Dark Bronze Anodized / Brush / AdhesiveReplacement Pile only, for #8192 & 8198Clear Anodized / .375” long Brush Clear Anodized / .375” Brush / AdhesiveDark Bronze Anodized / .375” long Brush Dark Bronze Anod./ .375” Brush / AdhesiveReplacement Pile Brush for 8193Clear Anodized / Neoprene LipClear Anodized / Neoprene Lip/ AdhesiveDark Bronze Anodized / Neoprene LipDark Bronze Anod./ Neoprene Lip/ AdhesiveClear Anodized / Neoprene LipClear Anodized / Neoprene Lip / AdhesiveClear Anodized Drip Cap / NeopreneDark Bronze Anodized Drip Cap / NeopreneGold Anodized Drip Cap / NeopreneClear Anodized Drip Cap / Brush SealDark Bronze Anodized Drip Cap / BrushGold Anodized Rain Drip / BrushPressure seal, silicone, black, PSASilicone lips, black, PSAClear Anodized & Neoprene SealDark Bronze Anodized & Neoprene SealClear Anodized & Neoprene SealDark Bronze Anodized & Neoprene SealClear Anodized with BrushDark Bronze Anodized with BrushClear Anodized with NeopreneDark Bronze Anodized with NeopreneLocking Key for Automatic Door BottomWheel Chair Shower ThresholdAluminum Handicap Threshold 5”(127)Aluminum 5 5/8”(142.9). Thermal BreakAluminum 7 5/8”(193.7). Thermal BreakAluminum 6 5/8”(168.3). Thermal Break/Neoprene.Aluminum 4 1/2”(114.3) wide with PVCThermal Break/ Rubber/ NeopreneAluminum 4 1/2”(114.3) wide with PVCThermal Break/ Unfinished Oak/ NeopreneNeoprene / PSA .500”(12.7) x .125”(3.2) Neoprene / PSA 1”(25.4) x .094”(2.4)Silicone Black Kerf SealSilicone White Kerf SealSIlicone Black Kerf SealSilicone White Kerf SealPolyvinyl chlorinated Kerf Seal, blackPolyvinyl chlorinated Kerf Seal, blackClear Anodized / Neoprene SealClear Anodized / Neoprene SealClear Anodized / Brush SealClear Anodized / Brush Seal / AdhesiveClear Anodized frame, acousticalDark Anodized frame, acousticalClear Anodized, Neoprene, Snap-on coverPVC Bumper, PSA, .750”x.188”PVC / Neoprene For Sliding Glass Doors3M Double-coated Clear Tape. 250” wide. FS1001 Intumet 1/16”(1.6) x 3/8”(9.5)FS1001 Intumet 1/16”(1.6) x 1/2”(12.7)FS1001 Intumet 1/16”(1.6) x 3/4”(19.1)FS1001 Intumet 1/16”(1.6) x 1”(25.4)FS1001 Intumet 1/16”(1.6) x 2”(50.8)FS1001 Intumet 1/8”(3.2) x 3/8”(9.5)

Meeting Stile Door Sweep Door Sweep Meeting Stile Door Sweep Meeting Stile Door Sweep Door Sweep Meeting Stile Door Sweep Meeting Stile Meeting Stile Meeting Stile Door Sweep Door Sweep Door Sweep Door Sweep Door Sweep Door Sweep Gasketing Meeting Stile Gasketing Gasketing Gasketing Gasketing Gasketing Gasketing Gasketing Gasketing Miscellaneous Threshold Threshold Threshold Threshold Threshold Threshold

Threshold Gasketing Gasketing Gasketing Gasketing Gasketing Gasketing Gasketing Gasketing Gasketing Gasketing Meeting Stile Meeting Stile Vision Lite Vision Lite Gasketing Miscellaneous Meeting Stile Miscellaneous Intumescent Intumescent Intumescent Intumescent Intumescent Intumescent

8192D-PSA8192P8193AA8193AA-PSA8193D 8193D-PSA8193P8194AA8194AA-PSA8194D8194D-PSA8195AA8195AA-PSA8197AA8197D8197G8198AA8198D8198G8216S-Bk8217S-Bk8302AA8302D8303AA8303D8305AA8305D8306AA8306D8361Key8452A8655A8724A8726A8729A

8730AR

8730AW

8770N8780N8800S-Bk8800S-Wh8810S-Bk8810S-Wh8841Y-Bk8877AA8878AA8879AA8879AA-PSA8880AA8880D8881AA91319137PSA9495Tape1062375PSA1062500PSA1062750PSA10621000PSA10622000PSA1125375PSA1125500PSA

6.663.71

4.17 5.47 5.146.502.864.175.475.146.505.166.775.547.597.595.757.887.88

1.39 1.39 2.834.552.834.553.715.953.715.953.15

14.09 10.30 22.44 27.14 30.25

25.01

25.01

93.68 2.28 2.55 2.55 2.19 2.19 1.87 5.37 5.165.816.53

12.4316.0715.45 4.18

10.44 83.61

1.24 1.31 1.71 2.30 3.66 1.71 2.30

21.8412.18

13.68 17.9416.8621.32

9.3713.6817.9416.8621.3216.9322.2018.1724.9124.9118.8725.8625.86

4.374.379.30

14.949.30

14.9412.1619.5312.1619.53

46.21 33.80 73.61 89.04 99.24

82.07

82.07

7.48 8.38 8.38 7.18 7.18 6.14

17.61 16.9319.0621.4240.7752.7250.69

13.72 34.25

4.07 4.31 5.60 7.53

12.00 5.60 7.53

29.36 16.93 21.16 21.16 87.96 99.44 38.13

126.72 300.70 365.21 362.31 282.78 150.45 300.93 376.15 601.65 676.88

84.34 107.71 107.71

6.33 5.10 7.18 6.52

13.26 6.15 6.14 6.52 8.16 8.16 9.66 9.66 5.77

29.10 11.60

13.36

14.59

22.21 5.94

22.57 25.90

8.79 8.79

11.24 5.59

18.99 6.54

19.92 9.95

18.87 25.86 25.86 14.53 18.79 20.08

$ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $

$ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ each each each each each $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $

$

$

$ $ $ $ $ $ $ $ $ $ $ $/75ft.(22.8m) $ $ $ $ $ $

$ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $

$ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ each $ $ $ $ $ $ $

/75ft.(22.8m) $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ /540ft. coil $ $ $ $ $ $ $


PARTNUMBER




LIST PRICE PER FOOT


1125750PSA11251000PSA11252000PSA1250375PSA1250500PSA1250750PSA12501000PSA12502000PSA2062375PSA2062500PSA2062750PSA20621000PSA20622000PSA2125375PSA2125500PSA2125750PSA21251000PSA21252000PSA2250375PSA2250500PSA2250750PSA22501000PSA22502000PSA3062375PSA3062500PSA3062750PSA30621000PSA30622000PSA3125375PSA3125500PSA3125625PSA3125750PSA31251000PSA31252000PSA3250375PSA3250500PSA3250750PSA32501000PSA32502000PSA4062375PSA4062500PSA4062750PSA40621000PSA40622000PSA4125375PSA4125500PSA4125750PSA41251000PSA41252000PSA4250375PSA4250500PSA4250750PSA42501000PSA42502000PSAFB1212

FB1610FB1808FB1810FB1818FB1836FB1860FB2020FB2424

FS820

FS821

FS850

FS851

FS860

FS3003-0621296

FS3003-1251296

FS4004-0621296

FS4004-1251296

PAN-ZSP250-GVSP250-SSSP350-GVSP350-SSSP450-GVSP450-SSSP550-GVSP550-SSSTC3003X062STC3003X125STC3003X250STC3003X375T4GZ46Z49Z49AAZ108-0Z108-1Z108-2Z108-3Z108-4Z950

Z953

Z955(32D)

Z961(USP)

Z9500

ZBB960(32D)

ZBB961(USP)

ZBB961(26D)

ZBB991(26D)

ZHP441ZHP442ZHP443ZHP444ZHP445ZLP44-650ZLP44-675ZLP44-750ZLP44-812

Intumescent

Intumescent

Intumescent

Intumescent

Intumescent

Intumescent

Intumescent

Intumescent

Intumescent

MiscellaneousDoorliteDoorliteDoorliteDoorliteDoorliteDoorliteDoorliteDoorliteGasketingGasketingGasketingGasketing

MiscellaneousMiscellaneousMiscellaneousMiscellaneousMiscellaneousMiscellaneousMiscellaneousMiscellaneousHinge

Hinge

Hinge

Hinge

Hinge

Hinge

Hinge

Hinge

Hinge

IntumescentIntumescentIntumescentIntumescentIntumescentIntumescentIntumescentIntumescentIntumescent

Soft Puff Intumet For Metal Frames#188S and #3125500PSASoft Puff Intumet For Wood Frames#188S and #3125500PSASoft Puff Intumet For Metal Frames#188S or #824 and #3125500PSASoft Puff Intumet For Metal Frames #824 and #3125500PSASeries, Intumescent Glazing TapePart # 2062375 and 3062750Intumet Firestop Sheet12”(304.8) x 96”(2438.4) x .062”(1.6)Intumet Firestop Sheet12”(304.8) x 96”(2438.4) x .125”(3.2)Intumet Firestop Sheet12”(304.8) x 96”(2438.4) x .062”(1.6)Intumet Firestop Sheet12”(304.8) x 96”(2438.4) x .125”(3.2)Optional Zinc Pan for Threshold 175Slimport, Cold Rolled Steel, Zinc Plated FinishSlimport, Stainless Steel, Satin FinishSlimport, Cold Rolled Steel, Zinc Plated FinishSlimport, Stainless Steel, Satin FinishSlimport, Cold Rolled Steel, Zinc Plated FinishSlimport, Stainless Steel, Satin FinishSlimport, Cold Rolled Steel, Zinc Plated FinishSlimport, Stainless Steel, Satin FinishSound Sheet 12”x 1/16” 19 STCSound Sheet 12”x 1/8” 24 STCSound Sheet 12”x 1/4”Sound Sheet 12”x 3/8”Vision LitesElectrical Automatic Door BottomSteel Holding Plates for Auto. Door BottomAluminum Holding Plates for Auto. Dr. BottomHeavy Duty Spring Recoil Door Holder 15.4”Heavy Duty Spring Recoil Door Holder 19.5”Heavy Duty Spring Recoil Door Holder 22.9”Heavy Duty Spring Recoil Door Holder 26.2”Heavy Duty Spring Recoil Door Holder 30”Stainless Steel Cam Lift Handed5”(127) x 4.5”(114.3) x .250”(6.4)Stainless Steel Cam Lift Handed5”(127) x 4.5”(114.3) x .180”(4.6)Stainless Steel Cam Lift Handed4.5”(114.3) x 4.5”(114.3) x .134”(3.4)Steel Prime Hinge4.5”(114.3) x 4.5”(114.3) x .134”(3.4)Stainless Steel Cam Lift Handed5”(127) x 4.5”(114.3) x .250”(6.4)Stainless Steel Ball Bearing Hinge 4.5”(114.3) x 4.5”(114.3) x .134”(3.4)Steel Prime Ball Bearing Hinge 4.5”(114.3) x 4.5”(114.3) x .134”(3.4)Steel Dull Chrome Ball Bearing Hinge 4.5”(114.3) x 4.5”(114.3) x .134”(3.4)Steel Dull Chrome Ball Bearing Hinge 5”(127) x 4.5”(114.3) x .134”(3.4)Hinge Pad 3.98”(101) x 1.18”(30)Hinge Pad 3.98”(101) x 1.46”(37)Hinge Pad 3.98”(101) x 1.65”(42)Hinge Pad 4.49”(114) x 1.65”(42)Hinge Pad 4.49”(114) x 1.85”(47)Lock Pack 3.0”(76.2) x 6.50”(165.1) Lock Pack 1.0”(25.4) x 6.75”(171.5) Lock Pack 3.0”(76.2) x 7.50”(190.5) Lock Pack 1.0”(25.4) x 9.25”(235.0)

FS1001 Intumet 1/8”(3.2) x 1/2”(12.7)FS1001 Intumet 1/8”(3.2) x 1”(25.4)FS1001 Intumet 1/8”(3.2) x 2”(50.8)FS1001 Intumet 1/4”(6.4) x 3/8”(9.5)FS1001 Intumet 1/4”(6.4) x 1/2”(12.7)FS1001 Intumet 1/4”(6.4) x 3/4”(19.1)FS1001 Intumet 1/4”(6.4) x 1”(25.4)FS1001 Intumet 1/4”(6.4) x 2”(50.8)FS2002 Intumet 1/16”(1.6) x 3/8”(9.5) FS2002 Intumet 1/16”(1.6) x 1/2”(12.7)FS2002 Intumet 1/16”(1.6) x 3/4”(19.1) FS2002 Intumet 1/16”(1.6) x 1”(25.4)FS2002 Intumet 1/16”(1.6) x 2”(50.8)FS2002 Intumet 1/8”(3.2) x 3/8”(9.5)FS2002 Intumet 1/8”(3.2) x 1/2”(12.7)FS2002 Intumet 1/8”(3.2) x 3/4”(19.1)FS2002 Intumet 1/8”(3.2) x 1”(25.4)FS2002 Intumet 1/8”(3.2) x 2”(50.8)FS2002 Intumet 1/4”(6.4) x 3/8”(9.5)FS2002 Intumet 1/4”(6.4) x 1/2”(12.7)FS2002 Intumet 1/4”(6.4) x 3/4”(19.1)FS2002 Intumet 1/4”(6.4) x 1”(25.4)FS2002 Intumet 1/4”(6.4) x 2”(50.8)FS3003 Intumet 1/16”(1.6) x 3/8”(9.5) FS3003 Intumet 1/16”(1.6) x 1/2”(12.7)FS3003 Intumet 1/16”(1.6) x 3/4”(19.1)FS3003 Intumet 1/16”(1.6) x 1”(25.4)FS3003 Intumet 1/16” (1.6) x 2” (50.8)FS3003 Intumet 1/8” (3.2) x 3/8” (9.5)FS3003 Intumet 1/8” (3.2) x 1/2” (12.7)FS3003 Intumet 1/8” (3.2) x 5/8” (15.9)FS3003 Intumet 1/8” (3.2) x 3/4” (19.1)FS3003 Intumet 1/8” (3.2) x 1” (25.4)FS3003 Intumet 1/8” (3.2) x 2” (50.8)FS3003 Intumet 1/4” (6.4) x 3/8” (9.5)FS3003 Intumet 1/4”(6.4) x 1/2” (12.7)FS3003 Intumet 1/4” (6.4) x 3/4” (19.1)FS3003 Intumet 1/4” (6.4) x 1” (25.4)FS3003 Intumet 1/4” (6.4) x 2” (50.8)FS4004 Intumet 1/16” (1.6) x 3/8” (9.5)FS4004 Intumet 1/16”(1.6) x 1/2”(12.7)FS4004 Intumet 1/16”(1.6) x 3/4”(19.1)FS4004 Intumet 1/16” (1.6) x 1” (25.4)FS4004 Intumet 1/16” (1.6) x 2” (50.8)FS4004 Intumet 1/8” (3.2) x 3/8” (9.5) FS4004 Intumet 1/8” (3.2) x 1/2” (12.7)FS4004 Intumet 1/8” (3.2) x 3/4” (19.1) FS4004 Intumet 1/8” (3.2) x 1” (25.4)FS4004 Intumet 1/8” (3.2) x 2” (50.8)FS4004 Intumet 1/4” (6.4) x 3/8” (9.5)FS4004 Intumet 1/4” (6.4) x 1/2” (12.7) FS4004 Intumet 1/4” (6.4) x 3/4” (19.1)FS4004 Intumet 1/4” (6.4) x 1” (25.4) FS4004 Intumet 1/4” (6.4) x 2” (50.8)Fire Block Intumescent for Door Louvers12”(301) x 12”(301) x .55”(14)16”(402) x 10”(250) x .55”(14)18”(453) x 8”(199) x .55”(14)18”(453) x 10”(250) x .55”(14)18”(453) x 18”(453) x .55”(14) 18”(453) x 36”(910) x .55”(14)18”(453) x 60”(1520) x .55”(14)20”(504) x 20”(504) x .55”(14)24”(606) x 24”(606) x .55”(14)

Intumescent Intumescent Intumescent Intumescent Intumescent Intumescent Intumescent Intumescent Intumescent Intumescent Intumescent Intumescent Intumescent Intumescent Intumescent Intumescent Intumescent Intumescent Intumescent Intumescent Intumescent Intumescent Intumescent Intumescent Intumescent Intumescent Intumescent Intumescent Intumescent Intumescent Intumescent Intumescent Intumescent Intumescent Intumescent Intumescent Intumescent Intumescent Intumescent Intumescent Intumescent Intumescent Intumescent Intumescent Intumescent Intumescent Intumescent Intumescent Intumescent Intumescent Intumescent Intumescent Intumescent Intumescent Intumescent Intumescent Intumescent Intumescent Intumescent Intumescent Intumescent Intumescent Intumescent

4.33

4.33

4.40

4.33

171.23

308.20

171.23

308.20

3.30 295.30 494.48 327.42 518.51 373.49 565.24 412.22 598.29

3.83 5.10 8.93

12.76

777.80 11.35 11.35

110.24 121.26 121.26 126.78 181.90 184.65

120.05

98.49

4.52

205.29

34.00

8.81

10.91

10.91

15.19 18.33 21.24 23.43 26.55

4.34 3.82 4.57 2.37

14.20

14.20

14.43

14.20

10.42

3.02 3.66 5.49 3.02 3.66 4.85 6.02 9.04 1.24 1.31 1.71 2.30 3.66 1.71 2.30 3.02 3.66 5.49 3.02 3.66 4.85 6.02 9.04 1.24 1.31 1.71 2.30 3.66 1.71 2.30 2.78 3.02 3.66 5.49 3.02 3.66 4.85 6.02 9.04 1.24 1.31 1.71 2.30 3.66 1.71 2.30 3.02 3.66 5.49 3.02 3.66 4.85 6.02 9.04

61.43

75.00 70.63 75.94 82.72

168.22 314.84

97.65 98.22

9.91 12.00 18.01

9.91 12.00 15.91 19.74 29.65

4.07 4.31 5.60 7.53

12.00 5.60 7.53 9.91

12.00 18.01

9.91 12.00 15.91 19.74 29.65

4.07 4.31 5.60 7.53

12.00 5.60 7.53 9.11 9.91

12.00 18.01

9.91 12.00 15.91 19.74 29.65

4.07 4.31 5.60 7.53

12.00 5.60 7.53 9.91

12.00 18.01

9.91 12.00 15.91 19.74 29.65

$ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $

$

$

$

$

CALL

$

$ $

$ $ $ $ $ $ $ $ $ $ $ $ $ $ CALL with dimensions $ $ $ $ $ $ $ $ $

$

$

$

$

$

$

$

$

$ $ $ $ $ $ $ $ $

$

$

$

$

each

each each

each $ each each each each each each each each / sqft. / sqft. / sqft. / sqft.

each /set (2) /set (2) each each each each each each

each

each

each

each

each

each

each

each

pack of 6 pack of 6 pack of 6 pack of 6 pack of 6 each each each each

$ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ each

each each each each each each each each


STANDARD SCREWS

#7201Z#7201BK

#6 x 3/4” Pan Phillips Head Self-drilling Zinc Plated $ 0.17 /ea.#6 x 3/4” Pan Phillips Head Self-drilling Black Oxide $ 0.20 /ea.

LIST PRICE

#7203Z#7203BK

#10 x 1-1/4” Flat Phillips Head Sheet Metal Screw Zinc Plated $ 0.46 /ea.#10 x 1-1/4” Flat Phillips Head Sheet Metal Screw Black Oxide $ 0.52 /ea.

LIST PRICE

#7233Z#7233B

#10 x 1-1/4” Flat Phillips Head Wood Screw Zinc Plated $ 0.49/ea.#10 x 1-1/4” Flat Phillips Head Wood Screw Brass Material $ 0.87/ea.

LIST PRICE

#7241Z #12 x 11/16” Flat Undercut Phillips Hd. Self-drilling Zinc Plated $ 0.58/ea.LIST PRICE

#7244Z#7245Z

1/4-20 x 1” Flat Phillips Head Machine Screw Zinc Plated $ 2.26 /ea.11/16 x 1” Zinc Plated $ 2.44 /ea.

#7249Z#7249BK

#10 x 3/4” Pan Phillips Head Self-drilling Zinc Plated $ 0.28 /ea.#10 x 3/4” Pan Phillips Head Self-drilling Black Oxide $ 0.31 /ea.

#7250Z #12-24 x 3/4” Flat Phillips Head, Type F Machine Screw Zinc Plated $ 0.58 /ea.

#7255Z #12-24 x 3/4” Flat Undercut Phillips Head, Type F Machine Screw Zinc $ 0.58 /ea.

#221 - Plastic Shield with #10 x 1-1/4” (or 1-1/2” , 1-3/4”) Flat Phillips SMS $ 0.63 /ea.

LIST PRICE

LIST PRICE

LIST PRICE

LIST PRICE

EXPANSION SHIELD/ ANCHORS

#222 - Lead Shield with #10 x 1-1/4” (or 1-1/2” , 1-3/4”) Flat Phillips SMS $ 0.64 /ea.

#223 - MSLA-10 Anchor with #10-24 x 1-1/2” Flat Phillips Machine Screw $ 1.14 /ea.

#224 - MSLA-4 Anchor with #1/4-20 x 1-1/2” Flat Phillips Machine Screw $ 1.49/ea.

SECURITY SCREWSTorx Screws are available upon request. CALL for price.

LIST PRICE

LIST PRICE

LIST PRICE

LIST PRICE

DRIVE SCREWS

NAILS

#4 5/16” (7.9) Waferhead Plated $ 0.15 /ea.#4 5/16” (7.9) Waferhead Stainless Steel $ 0.28 /ea.

LIST PRICE

#16 7/8” (22.2) Zinc Plated Flathead Steel Nail $ 31.60 / lb.#16 7/8”(22.2) Copper Plated Flathead Nail $ 31.60 / lb.(1 lb. contains + 1300 pcs. )

ZERO HINGESSIZES: Stock sizes for continuous hinges:

84”(2133.6), 86”(2184.4), 96”(2438.4), 108”(2743.2)Other sizes available at extra charge. Hinges are priced to foot

SPECIFICATIONS: “DB” “CE” “EPT”

“SC”

“HT”

Double Bearing (Heavy Duty)Concealed Electric, Geared OnlyAdd $91.17 net to price of #910.Electric Power Transfer $ 43.78 net(template / location required )School Option available to all type hinges.Add one foot to price. Handing required.Hospital Tip. Add $ 43.78 net to price. Handing required.

SAMPLE #910DB-A-SC

PART NUMBER FINISH SCHOOL OPTION DOUBLE BEARING (Heavy Duty)

- Electric Power Transfer $ 43.78 net• EPT Cut out to accomodate Von Duprin 9 or equivalent) power transfer unit.

• HT - Hospital Tip $ 43.78 net

TOP HINGE TOP HINGE

For 7’-0” hinge, cutout located at 41-9/16”from top hinge to centerline of cutout distanceFor 8’-0” hinge, cutout located at 47-9/16”from top hinge to centerline of cutout distance

Specify hand of opening when ordering

Handing requiredCenterline

Handing required

- Concealed Electric - 6 Wires $91.17 net (formerly #912)

• CE • SC - School Option (Add one foot to price)

The UNIGEAR can be specified witha non-removable cap at the hinge topto guard against foreign material being droped in.

8.5” from top of hingeto CE centerline

Geared Only

14” CE section(cut line)

APPLICATIONS:For Head and Jamb

For Threshold

For Threshold

For Hinges (#919 type)

For Astragals

For Hinges (#Z950 type)

For Hinges (#Z955 type)

For Hinges (#930 type)

#226#227

LIST PRICEStainless Steel Sleeve Anchor $ 4.10 /ea.Wet-Set Anchor $ 4.09 /ea. w w w . z e r o i n t e r n a t i o n a l . c o m

MEMBER MEMBER

OPTIONAL EXTRAS

© 2015 Allegion 000000, Rev. 10/15allegion.com/us

Allegion (NYSE: ALLE) creates peace of mind by pioneering safety and security. As a $2 billion provider of security solutions for homes and businesses, Allegion employs more than 7,800 people and sells products in more than 120 countries across the world. Allegion comprises 23 global brands, including strategic brands CISA®, Interflex®, LCN®, Schlage® and Von Duprin®.

For more, visit www.allegion.com

About Allegion

Documents

Price book 1 - Zero International October 5, 2015 • Rev 10/15 Price book 1 115 2:[[ZXi^kZDXidWZg*!'%&* GZk#&%$&* This price list supersedes and cancels all previous price lists

Price book 1 - Zero International October 5, 2015 • Rev 10/15 Price book 1 115 2:[[ZXi^kZDXidWZg!'%& GZk#&%$&* This price list supersedes and cancels all previous price lists