Upload
dangtram
View
551
Download
82
Embed Size (px)
Citation preview
SEPAM, MiCOM & VAMP RangesAutomtion business unit
Price guide 2015
SEPAM, MiCOM and VAMP Price Guide 2015
Page
Sepam Series
S10N - Overcurrent Protection IED - 1 phase 7
S10B - Overcurrent Protection IED - 2/3 phase + EF 7
S10A - Overcurrent Protection IED - 3 phase + EF 7
Sepam series 20-40 Basic UMI 8
Sepam series 20-40 Integrated advanced UMI 9
Sepam series 60 10
Sepam series 80 with remote UMI 11
Sepam series 80 with advanced UMI 11
Sepam series 80 MIMIC based UMI 12
Sepam accessories for 10, 20, 40, 60 ,80 13
Sepam spare part 14
MiCOM Px10 series
P111 Enhancement - Overcurrent Protection IED 17
P114D - MiCOM Self-Powered Overcurrent IED 17
P115 - MiCOM Self-Powered Overcurrent Protection IED 17
P116 Model A - MiCOM Self/Dual Overcurrent Protection IED 17
P116 Model L - MiCOM Self/Dual Overcurrent Protection IED 17
P211 - MiCOM Motor IED 17
MiCOM Px20 series
P120 - MiCOM Overcurrent Protection IED - 1 phase 18
P121 - MiCOM Overcurrent Protection IED - 3 Phase 18
P122 - MiCOM Overcurrent Protection IED - 3 Phase & EF 18
P123 - MiCOM Overcurrent Protection IED - 3 Phase & EF 18
P123R - MiCOM Overcurrent Protection IED - 3 Phase & EF, Retrofit solution 18
P125 - MiCOM Directional Overcurrent Protection IED - DEF 18
P126 - MiCOM Directional Overcurrent Protection IED - 3 phase OC & DEF 18
P127 - MiCOM Directional Overcurrent Protection IED - 3 Phase DOC & DEF 18
P220 - MiCOM Motor Protection IED 19
P225 - MiCOM Motor Protection IED 19
P521 - MiCOM Differential Feeder Protection IED 19
P521 - Options and Accessories 19
P591 - MiCOM G703 Interface Module 20
P593 - MiCOM X21 Interface Module 20
P594 - MiCOM GPS Synchronising Module 20
P-2M-L - G703 Optic/Electric Interface unit 20
P721 - MiCOM High Impedance Differential IED - 1 phase 20
P723 - MiCOM High Impedance Differential IED - 3 phase 20
P791 - Accessory for High Impedance Differential application 20
P793 - Accessory for High Impedance Differential application 20
Sepam series Accessories
Contents
Sepam series 10
Sepam series 20-40
Sepam series 60
Sepam series 80
Sepam series spare part
Non-Directional Overcurrent
Self/Dual Powered Overcurrent
Motor Portection
Overcurrent Protection
Motor Protection
Line Differention
High Impedance Differential Protection
Schneider Electric SA - NRJED113434EN Page 3 of 65
SEPAM, MiCOM and VAMP Price Guide 2015
P821 - MiCOM Stand-alone Breaker Failure IED 21
P921 - MiCOM Voltage Protection IED 21
P922 - MiCOM Voltage & Frequency Protection IED 21
P923 - MiCOM Voltage & Frequency Protection IED 21
E2 - RS232/USB cable 21
STRIKER - Striker for Self-powered relays (GPA-50.1 / V668) 21
E124 - MiCOM Capacitor Trip Unit 21
MiCOM Px30 series
P130C - MiCOM Compact Non-directional Overcurrent IED 22
P130C - MiCOM Compact Directional Overcurrent IED 22
P132 - MiCOM Feeder Management 22
P139 - MiCOM Feeder Management 23
P430C - MiCOM Compact Distance IED 23
P433 - MiCOM Distance IED 24
P435 - MiCOM Distance IED 24
P437 - MiCOM Distance IED 25
P439 - MiCOM Distance IED 25
P530C - MiCOM Compact Line Differential IED 26
P532 - MiCOM Line Differential IED 26
P630C - MiCOM Compact Transformer Management 27
P631 - MiCOM Transformer Management 27
P632 - MiCOM Transformer Management 27
P633 - MiCOM Transformer Management 28
P634 - MiCOM Transformer Management 28
P130C - Voltage only option 29
P132 - Voltage only option 29
P138 - Railway Overcurrent IED 31
P436 - Railway Distance IED 31
P438 - Railway Distance IED 32
P638 - Railway Transformer IED 32
MiCOM Px40 series
P141 - MiCOM Feeder Management IED 33
P142 - MiCOM Feeder Management IED with Auto-reclose 33
P143 - MiCOM Feeder Management IED with Auto-reclose & Check Synch 34
P145 - MiCOM Feeder Management IED with Auto-reclose & Check Synch 34
P241 - MiCOM Universal Motor Protection IED 35
P242 - MiCOM Universal Motor Protection IED 35
P243 - MiCOM Universal Motor Protection IED 36
P341 - MiCOM Interconnection / Loss of Mains Protection IED 36
P342 - MiCOM Generator Protection IED 37
P343 - MiCOM Generator Protection IED 38
P344 - MiCOM Generator Protection IED 39
P345 - MiCOM Generator Protection IED 40
Accessories & Cables
Breaker Failure Protection
Voltage & Frequency Protection
Integrated Generator Management
Non-Directional Overcurrent Protection
Directional Overcurrent Protection
Integrated Feeder Management
Line/Cable Distance Protection
Line Differential Protection
Integrated Transformer Management
Voltage & FREQUENCY Protection
Railway Protection
Integrated Feeder Management
Integrated Motor Management
Schneider Electric SA - NRJED113434EN Page 4 of 65
SEPAM, MiCOM and VAMP Price Guide 2015
P441 - MiCOM Distance Protection (3 Phase) IED 40
P442 - MiCOM Distance Protection (1/3 Phase) IED 41
P443 - MiCOM Distance Protection (1/3 Phase) IED 41
P444 - MiCOM Distance Protection (1/3 Phase) IED 42
P445 - MiCOM Distance Protection (1/3 Phase) IED 42
P446 - MiCOM Distance Protection (1/3 Phase) IED 43
P541 - MiCOM Line Differential Protection (with Overcurrent Backup) IED 43
P542 - MiCOM Line Differential Protection (with Overcurrent Backup) IED 43
P543 - MiCOM Line Differential Protection (with Distance Backup) IED 44
P544 - MiCOM Line Differential Protection (with Distance Backup) IED 44
P545 - MiCOM Line Differential Protection (with Distance Backup) IED 45
P546 - MiCOM Line Differential Protection (with Distance Backup) IED 45
P591 - MiCOM G703 Interface Module 46
P593 - MiCOM X21 Interface Module 46
P594 - MiCOM GPS Synchronising Module 46
P-2M-L - G703 Optic/Electric Interface Unit 46
P547- MiCOM Phase Comparison Protection IED 46
P642 - MiCOM Transformer Protection IED - 2 windings 47
P643 - MiCOM Transformer Protection IED - 2 or 3 windings 47
P645 - MiCOM Transformer Protection IED - 2 or 3 windings 48
P741 - MiCOM Low Impedance Busbar IED - Central Unit 48
P742 - MiCOM Low Impedance Busbar IED - Peripheral Unit 49
P743 - MiCOM Low Impedance Busbar IED - Peripheral Unit 49
P746 - MiCOM Low Impedance Centralised Busbar IED 49
P841 - MiCOM Breaker Failure & Autoreclose IED 50
P849 - MiCOM I/O Extension Device 50
See Integrated Feeder Management Section above 50
VAMP Protection Relays
VAMP50 Overcurrent & Earthfault IED with AutoReclose 52
VAMP59 Line Differential IED 53
VAMP40 Feeder Motor Capacitor IED 54
VAMP52 Feeder Motor IED 54VAMP230 Feeder Motor IED 55VAMP255 Feeder Motor IED 55VAMP257 Feeder Motor IED 55VAMP300 Feeder Motor IED 56
VAMP259 Line Manager - Distance and Differential IED 56
VAMP265 Differential IED 57
VAMP210 Generator IED 57
VAMP55 Voltage/Frequency IED 58
VAMP 11V Voltage/Frequency IED 58
Accessories - Frames 59Accessories - Cables 59Accessories - Profibus Convertor, Alarm Panel, Current Injection, Line amplifier and IO PSU 59Accessories - VIO external IO units 59
VAMP ARC Protection
VAMP120 Arc Unit with 4 sensors 60VAMP121 Arc Unit 60VAMP221 Central Unit 60VAMP321 Central Unit 61Accessories - Sensors, cables and trip relay extension units 62Accessories - Fibre Sensors > 8000 LUX activation 62
Line Manager
Breaker Failure, Autoreclose, I/O extension
Autoreclose & Check Synch
Overcurrent Protection
Line Differential Protection
Feeder - Motor- Capacitor Proection
Line / Cable Distance Protection
Line / Cable Current Differential Protection
Phase Comparsion Protection
Integrated Transformer Management
Busbar Protection
Generator Protection
Voltage & Frequency Protection
Accessories & Cables
ARC PROTECTION
Differential Protection
Schneider Electric SA - NRJED113434EN Page 5 of 65
SEPAM
SEPAM, MiCOM and VAMP Price Guide 2015
Sepam series 10 International rangeSepam series 10N 1 earth
ANSI Standard (0.1…24In0) Type Reference Price
50N/51N 24…125Vdc & 100…120Vac Sepam series 10N 11A REL59817 €641
110…250VDC & 100…240VAC Sepam series 10N 11E REL59819 €615
Very sensitive (0.2…24A and 2…240A) Type Reference Price
24…125VDC & 100…120VAC Sepam series 10B 13A REL59818 €667
110…250VDC & 100…240VAC Sepam series 10B 13E REL59820 €638
Sepam Series 10B 2 ph + 1 earth
ANSI Standard (0.1…24In0) Type Reference Price
50N/51N, 50/51, 49RMS
24…125VDC & 100…120VAC Sepam series 10B 31A REL59800 €641
110…250VDC & 100…240VAC Sepam series 10B 31E REL59801 €564
Sepam Series 10B 3 ph + 1 earth
ANSI Standard (0.1…24In0) Type Reference Price
50N/51N, 50/51, 49RMS
24…125VDC & 100…120VAC Sepam series 10B 41A REL59802 €538
110…250VDC & 100…240VAC Sepam series 10B 41E REL59805 €513
Sensitive (0.01…2.4In0) Type Reference Price
24…125VDC & 100…120VAC Sepam series 10B 42A REL59803 €589
110…250VDC & 100…240VAC Sepam series 10B 42E REL59806 €564
Very sensitive (0.2…24A and 2…240A) Type Reference Price
24…125VDC & 100…120VAC Sepam series 10B 43A REL59804 €615
110…250VDC & 100…240VAC Sepam series 10B 43E REL59807 €615
Sepam Series 10A 3 ph + 1 earth + comm.
ANSI Standard (0.1…24In0) Type Reference Price
50N/51N, 50/51, 49RMS
24…125VDC & 100…120VAC Sepam series 10A 41A REL59808 €861
110…250VDC & 100…240VAC Sepam series 10A 41E REL59811 €820
220…250VDC Sepam series 10A 41F REL59814 €861
Sensitive (0.01…2.4In0) Type Reference Price
24…125VDC & 100…120VAC Sepam series 10A 42A REL59809 €943
110…250VDC & 100…240VAC Sepam series 10A 42E REL59812 €902
220…250VDC Sepam series 10A 42F REL59815 €943
Very sensitive (0.2…24A and 2…240A) Type Reference Price
24…125VDC & 100…120VAC Sepam series 10A 43A REL59810 €984
110…250VDC & 100…240VAC Sepam series 10A 43E REL59813 €984
220…250VDC Sepam series 10A 43F REL59816 €1,025
Schneider Electric SA - NRJED113434EN Page 8 of 65
SEPAM, MiCOM and VAMP Price Guide 2015
Sepam series 20-40 � Prices for SEPAM 20 includes: Base unit, 20-pin sc rew connector, 1A/5A CT current connector, software
� Prices for SEPAM 40 includes: Base unit, 20-pin sc rew connector, 6-pin screw-type connector, 1A/5A CT current connector, software
� Optional: Add the TCP/IP firmware option (only for series 40).
Basic UMI
Sepam series 20 Application Type ANSI Price
Substation S20 €961
S24 €1,026
Transformer T20 €1,139
T24 €1,204
Motor M20 €1,297
Busbar B21 €961
B22 €1,751
Sepam series 40 Application Type ANSI Price
Substation S40 €1,950
S41 €2,584
S42 €3,464
S43 €1,890
S44 €1,856
S50 €2,088
S51 €2,720
S52 €3,592
S53 €2,032
S54 €1,995
Transformer T40 €2,152
T42 €3,636
T50 €2,280
T52 €3,756
50/51, 50N/51N, 50G/51G, 46, 49RMS, 38/49T, 23/63, 27, 59, 59N, 47, 81H, 81L, 67, 67N, 67NC
50/51, CLPU 50/51, 50N/51N, , CLPU 50N/51N, 50G/51G, 46, 49RMS, 38/49T, 50BF, 23/63, 27, 59, 59N, 47, 81H, 81L 46BC
50/51, CLPU 50/51, 50N/51N, , CLPU 50N/51N, 50G/51G, 46, 49RMS, 38/49T, 50BF, 23/63, 27, 59, 59N,
50/51, CLPU 50/51, 50N/51N, 50G/51G, CPLU 50N/51N, 46, 79, 46BC, 27, 59, 59N, 47, 81H, 81L, 50BF
50/51, CLPU 50/51, 50N/51N, 50G/51G, CPLU 50N/51N, 46, 79, 46BC, 27, 59, 59N, 47, 81H, 81L, 67N/67NC, 32P, 50BF
50/51, CLPU 50/51, 50N/51N, 50G/51G, CPLU 50N/51N, 46, 79, 46BC, 27, 59, 59N, 47, 81H, 81L, 67, 67N/67NC, 32P, 50BF
50/51, CLPU 50/51, 50N/51N, 50G/51G, CPLU 50N/51N, 46, 79, 46BC, 67N/67NC, 32P, 50BF
50/51, CLPU 50/51, 50N/51N, 50G/51G, CPLU 50N/51N, 46, 79, 46BC, 27, 59, 47, 50BF
50/51, 50N/51N, 50G/51G, 46, 49RMS, 38/49T, 23/63, 27, 59, 59N, 47, 81H, 81L
27D, 27R, 27, 59, 59N, 81H, 81L, 81R
50/51, 50N/51N, 50G/51G, 46, 79, 27, 59, 59N, 47, 81H, 81L , 50BF
50/51, 50N/51N, 50G/51G, 46, 79, 27, 59, 59N, 47, 81H, 81L, 67N/67NC, 32P, 50BF
50/51, 50N/51N, 50G/51G, 46, 79, 27, 59, 59N, 47, 81H, 81L, 67, 67N/67NC, 32P, 50BF
50/51, 50N/51N, 50G/51G, 46, 79, 67N/67NC, 32P, 50BF
50/51, 50N/51N, 50G/51G, 46, 79, 27, 59, 47, 50BF
50/51, 50N/51N, 50G/51G,46, 79
50/51, CLPU 50/51, 50N/51N, 50G/51G, CPLU 50N/51N, 46, 79, 50BF
50/51, 50N/51N, 50G/51G, 46, 49RMS, 38/49T, 23/63
50/51, CLPU 50/51, 50N/51N, , CLPU 50N/51N, 50G/51G, 46, 49RMS, 38/49T, 50BF, 23/63
50/51, 50N/51N, 50G/51G, 46, 49RMS, 38/49T, 37, 48/51LR/14, 66
27D, 27R, 27, 59, 59N, 81H, 81L
Motor M40 €2,278
M41 €2,842
Generator G40 €2,741
47, 81H, 81L, 67, 67N, 67NC, 46BC
50/51, 50N/51N, 50G/51G, 46, 49RMS, 38/49T, 37, 48/51LR/14, 66, 27D, 27R, 27, 59, 50BF
50/51, 50N/51N, 50G/51G, 46, 49RMS, 38/49T, 37, 48/51LR/14, 66, 27D, 27R, 27, 59, 59N, 67N, 67NC, 32P, 32Q/40, 47, 81H, 81L, 50BF
50/51, 50N/51N, 50G/51G, 46, 50BF, 49RMS, 32P, 32Q/40, 50V/51V, 27,59, 59N, 47, 81H, 81L, 38/49T
Schneider Electric SA - NRJED113434EN Page 9 of 65
SEPAM, MiCOM and VAMP Price Guide 2015
Integrated advanced UMI
Sepam series 20 Application Type ANSI Price
Substation S20 €1,161
S24 €1,226
Transformer T20 €1,339
T24 €1,404
Motor M20 €1,497
Busbar B21 €1,161
B22 €1,951
Sepam series 40 Application Type ANSI Price
Substation S40 €2,110
S41 €2,744
S42 €3,624
S43 €2,050
S44 €2,016
S50 €2,248
S51 €2,880
S52 €3,752
S53 €2,192
S54 €2,155
Transformer T40 €2,312
T42 €3,796
T50 €2,440
T52 €3,916
Motor M40 €2,438
M41 €3,002
50/51, 50N/51N, 50G/51G, 46, 49RMS, 38/49T, 23/63, 27, 59, 59N, 47, 81H, 81L, 67, 67N, 67NC
50/51, CLPU 50/51, 50N/51N, , CLPU 50N/51N, 50G/51G, 46, 49RMS, 38/49T, 50BF, 23/63, 27, 59, 59N, 47, 81H, 81L 46BC
50/51, CLPU 50/51, 50N/51N, , CLPU 50N/51N, 50G/51G, 46, 49RMS, 38/49T, 50BF, 23/63, 27, 59, 59N, 47, 81H, 81L, 67, 67N, 67NC, 46BC
50/51, 50N/51N, 50G/51G, 46, 49RMS, 38/49T, 37, 48/51LR/14, 66, 27D, 27R, 27, 59, 50BF
50/51, 50N/51N, 50G/51G, 46, 49RMS, 38/49T, 37, 48/51LR/14, 66, 27D, 27R, 27, 59, 59N, 67N, 67NC, 32P, 32Q/40, 47, 81H, 81L, 50BF
50/51, CLPU 50/51, 50N/51N, 50G/51G, CPLU 50N/51N, 46, 79, 46BC, 27, 59, 59N, 47, 81H, 81L, 50BF
50/51, CLPU 50/51, 50N/51N, 50G/51G, CPLU 50N/51N, 46, 79, 46BC, 27, 59, 59N, 47, 81H, 81L, 67N/67NC, 32P, 50BF
50/51, CLPU 50/51, 50N/51N, 50G/51G, CPLU 50N/51N, 46, 79, 46BC, 27, 59, 59N, 47, 81H, 81L, 67, 67N/67NC, 32P, 50BF
50/51, CLPU 50/51, 50N/51N, 50G/51G, CPLU 50N/51N, 46, 79, 46BC, 67N/67NC, 32P, 50BF
50/51, CLPU 50/51, 50N/51N, 50G/51G, CPLU 50N/51N, 46, 79, 46BC, 27, 59, 47, 50BF
50/51, 50N/51N, 50G/51G, 46, 49RMS, 38/49T, 23/63, 27, 59, 59N, 47, 81H, 81L
27D, 27R, 27, 59, 59N, 81H, 81L, 81R
50/51, 50N/51N, 50G/51G, 46, 79, 27, 59, 59N, 47, 81H, 81L , 50BF
50/51, 50N/51N, 50G/51G, 46, 79, 27, 59, 59N, 47, 81H, 81L, 67N/67NC, 32P, 50BF
50/51, 50N/51N, 50G/51G, 46, 79, 27, 59, 59N, 47, 81H, 81L, 67, 67N/67NC, 32P, 50BF
50/51, 50N/51N, 50G/51G, 46, 79, 67N/67NC, 32P, 50BF
50/51, 50N/51N, 50G/51G, 46, 79, 27, 59, 47, 50BF
50/51, 50N/51N, 50G/51G,46, 79
50/51, CLPU 50/51, 50N/51N, 50G/51G, CPLU 50N/51N, 46, 79, 50BF
50/51, 50N/51N, 50G/51G, 46, 49RMS, 38/49T, 23/63
50/51, CLPU 50/51, 50N/51N, , CLPU 50N/51N, 50G/51G, 46, 49RMS, 38/49T, 50BF, 23/63
50/51, 50N/51N, 50G/51G, 46, 49RMS, 38/49T, 37, 48/51LR/14, 66
27D, 27R, 27, 59, 59N, 81H, 81L
Generator G40 €2,901
TCP/IP firmware option (for series 40 only)
TCP/IP firmware option TCP/IP 59754 €199
32Q/40, 47, 81H, 81L, 50BF
50/51, 50N/51N, 50G/51G, 46, 50BF, 49RMS, 32P, 32Q/40, 50V/51V, 27,59, 59N, 47, 81H, 81L, 38/49T
Schneider Electric SA - NRJED113434EN Page 10 of 65
SEPAM, MiCOM and VAMP Price Guide 2015
Sepam series 60 � Prices for SEPAM 60 includes: Base unit, 2x 20-pin screw connector, 1A/5A CT current connector, memor y cartridge, software
� Add DSM303 to SEPAM series 60 without UMI
� Optional: Add the TCP/IP firmware option
Without UMI
Sepam series 60 Application Type ANSI Price
Substation S60 €2,266
S62 €3,874
Transformer T60 €2,962
T62 €4,170
Motor M61 €3,190
Generator G60 €3,130
G62 €4,970
Capacitor C60 €2,266
With advanced UMI
Sepam series 60 Application Type ANSI Price
Substation S60 €2,426
S62 €4,034
Transformer T60 €3,122
T62 €4,330
Motor M61 €3,350
Generator G60 €3,290
G62 €5,130
Capacitor C60 €2,426
With mimic-based UMI
50/51, 50N/51N, 50G/51G, 46, 49RMS, 38/49T, 37, 48/51LR/14, 66, 27D, 27R, 27, 59, 67N, 67NC, 32P, 32Q/40, 12, 14, 47, 81H, 81L, 26/63, 50BF
50/51, 50N/51N, 50G/51G, 46, 50BF, 49RMS, 32P, 32Q/40, 50V/51V, 27,59, 59N, 47, 81H, 81L, 38/49T, 37P, 40, 12, 14, 21B, 27D, 27R, 81R, 26/63, 25
50/51, 50N/51N, 50G/51G, 46, 50BF, 49RMS, 32P, 32Q/40, 50V/51V, 27,59, 59N, 47, 81H, 81L, 38/49T, 37P, 40, 12, 14, 21B, 27D, 27R, 81R, 26/63, 25, 67, 67N, 67NC
50/51, 50N/51N, 50G/51G, 46, 50BF, 49RMS, 27D, 27R, 27, 59, 59N, 47, 81H, 81L, 38/49T
50/51, 50N/51N, 50G/51G, 46, 50BF, 49RMS, 32P, 32Q/40, 50V/51V, 27,59, 59N, 47, 81H, 81L, 38/49T, 37P, 40, 12, 14, 21B, 27D, 27R, 81R, 26/63, 25, 67, 67N, 67NC
50/51, 50N/51N, 50G/51G, 46, 50BF, 49RMS, 27D, 27R, 27, 59, 59N, 47, 81H, 81L, 38/49T
50/51, 50N/51N, 50G/51G, 46, 50BF, 79, 25, 27D, 27R, 27, 59, 59N, 47, 81H, 81L, 81R,
50/51, 50N/51N, 50G/51G, 46, 50BF, 79, 25, 27D, 27R, 27, 59, 59N, 47, 81H, 81L, 81R, 67, 67N, 32P, 49RMS
50/51, 50N/51N, 50G/51G, 46, 49RMS, 38/49T, 23/63, 27, 59, 59N, 47, 81H, 81L, 64REF, 27D, 27R
50/51, 50N/51N, 50G/51G, 46, 49RMS, 38/49T, 23/63, 27, 59, 59N, 47, 81H, 81L, 67, 67N, 67NC, 64REF, 27D, 27R
50/51, 50N/51N, 50G/51G, 46, 50BF, 79, 25, 27D, 27R, 27, 59, 59N, 47, 81H, 81L, 81R,
50/51, 50N/51N, 50G/51G, 46, 50BF, 79, 25, 27D, 27R, 27, 59, 59N, 47, 81H, 81L, 81R, 67, 67N, 32P, 49RMS
50/51, 50N/51N, 50G/51G, 46, 49RMS, 38/49T, 23/63, 27, 59, 59N, 47, 81H, 81L, 64REF, 27D, 27R
50/51, 50N/51N, 50G/51G, 46, 49RMS, 38/49T, 23/63, 27, 59, 59N, 47, 81H, 81L, 67, 67N, 67NC, 64REF, 27D, 27R
50/51, 50N/51N, 50G/51G, 46, 49RMS, 38/49T, 37, 48/51LR/14, 66, 27D, 27R, 27, 59, 67N, 67NC, 32P, 32Q/40, 12, 14, 47, 81H, 81L, 26/63, 50BF
50/51, 50N/51N, 50G/51G, 46, 50BF, 49RMS, 32P, 32Q/40, 50V/51V, 27,59, 59N, 47, 81H, 81L, 38/49T, 37P, 40, 12, 14, 21B, 27D, 27R, 81R, 26/63, 25
Sepam series 60 Application Type ANSI Price
Substation S60 €2,626
S62 €4,234
Transformer T60 €3,322
T62 €4,530
Motor M61 €3,550
Generator G60 €3,490
G62 €5,330
Capacitor C60 €2,626
TCP/IP firmware option
TCP/IP firmware option TCP/IP 59754 €199
50/51, 50N/51N, 50G/51G, 46, 49RMS, 38/49T, 23/63, 27, 59, 59N, 47, 81H, 81L, 64REF, 27D, 27R
50/51, 50N/51N, 50G/51G, 46, 49RMS, 38/49T, 23/63, 27, 59, 59N, 47, 81H, 81L, 67, 67N, 67NC, 64REF, 27D, 27R
50/51, 50N/51N, 50G/51G, 46, 49RMS, 38/49T, 37, 48/51LR/14, 66, 27D, 27R, 27, 59, 67N, 67NC, 32P, 32Q/40, 12, 14, 47, 81H, 81L, 26/63, 50BF
50/51, 50N/51N, 50G/51G, 46, 50BF, 49RMS, 32P, 32Q/40, 50V/51V, 27,59, 59N, 47, 81H, 81L, 38/49T, 37P, 40, 12, 14, 21B, 27D, 27R, 81R, 26/63, 25
50/51, 50N/51N, 50G/51G, 46, 50BF, 49RMS, 32P, 32Q/40, 50V/51V, 27,59, 59N, 47, 81H, 81L, 38/49T, 37P, 40, 12, 14, 21B, 27D, 27R, 81R, 26/63, 25, 67, 67N, 67NC
50/51, 50N/51N, 50G/51G, 46, 50BF, 49RMS, 27D, 27R, 27, 59, 59N, 47, 81H, 81L, 38/49T
50/51, 50N/51N, 50G/51G, 46, 50BF, 79, 25, 27D, 27R, 27, 59, 59N, 47, 81H, 81L, 81R,
50/51, 50N/51N, 50G/51G, 46, 50BF, 79, 25, 27D, 27R, 27, 59, 59N, 47, 81H, 81L, 81R, 67, 67N, 32P, 49RMS
Schneider Electric SA - NRJED113434EN Page 11 of 65
SEPAM, MiCOM and VAMP Price Guide 2015
Sepam series 80 � Prices for SEPAM 80 includes: Base unit, 2x 20-pin screw connector, 1x 1A/5A CT current connector, me mory cartridge, software
� Add DSM303 to SEPAM series 80 without UMI
� Optional: Add the TCP/IP firmware option
� Optional: Add the Logipam option
Without UMI
Sepam series 80 Application Type ANSI Price
Substation S80 €2,553
S81 €3,191
S82 €4,719
S84 €5,711
Transformer T81 €3,907
T82 €5,451
T87 €6,651
Motor M81 €3,691
M87 €5,171
M88 €6,171
Generator G82 €5,996
G87 €6,773
G88 €7,803
Busbar B80 €2,504
B83 €3,747
Capacitor C86 €2,904
50/51, 50N/51N, 50G/51G, 46, 50BF, 49RMS, 38/49T, 37, 37Q/40, 27D, 27R, 27, 59, 59N, 47, 67, 67N, 67NC, 32P, 32Q/40, 12, 14, 81H, 81L, 40, 78PS, 87T, 21B , 50V/51V, 50/27, 27TN/64G2, 24, 25, 64REF
50/51, 50N/51N, 50G/51G, 46, 50BF, 27D, 27R, 27, 59, 59N, 81H, 81L, 81R, 25
50/51, 50N/51N, 50G/51G, 46, 50BF, 27D, 27R, 27, 59, 59N, 81H, 81L, 81R, 25
50/51, 50N/51N, 50G/51G, 46, 50BF, 49RMS, 27D, 27R, 27, 59, 59N, 47, 81H, 81L, 38/49T, 51C
50/51, 50N/51N, 50G/51G, 46, 49RMS, 38/49T, 23/63, 27, 59, 59N, 47, 81H, 81L, 67, 67N, 67NC, 64REF, 27D, 27R, 87T
50/51, 50N/51N, 50G/51G, 46, 49RMS, 38/49T, 37, 48/51LR/14, 66, 27D, 27R, 27, 59, 67N, 67NC, 32P, 32Q/40, 12, 14, 47, 81H, 81L, 26/63, 78PS, 50BF
50/51, 50N/51N, 50G/51G, 46, 49RMS, 38/49T, 37, 48/51LR/14, 66, 27D, 27R, 27, 59, 67N, 67NC, 32P, 32Q/40, 12, 14, 47, 81H, 81L, 78PS, 87M, 50BF
50/51, 50N/51N, 50G/51G, 46, 49RMS, 38/49T, 37, 48/51LR/14, 66, 27D, 27R, 27, 59, 67N, 67NC, 32P, 32Q/40, 12, 14, 47, 81H, 81L, 26/63, 78PS, 87T, 50BF
50/51, 50N/51N, 50G/51G, 46, 50BF, 49RMS, 32P, 32Q/40, 50V/51V, 27,59, 59N, 47, 81H, 81L, 38/49T, 37P, 40, 12, 14, 21B, 27D, 27R, 26/63, 25, 67, 67N, 67NC, 64REF, 78PS, 50/27, 27TN/64G2, 24
50/51, 50N/51N, 50G/51G, 46, 50BF, 49RMS, 38/49T, 37, 37Q/40, 37P, 27D, 27R, 27, 59, 59N, 47, 67, 67N, 67NC, 32P, 32Q/40, 12, 14, 81H, 81L, 26/63, 40, 78PS, 87M, 21B , 50V/51V, 50/27, 27TN/64G2, 24, 25, 40
50/51, 50N/51N, 50G/51G, 46, 50BF, 79, 25, 27D, 27R, 27, 59, 59N, 47, 81H, 81L
50/51, 50N/51N, 50G/51G, 46, 50BF, 79, 25, 27D, 27R, 27, 59, 59N, 47, 81H, 81L, 67N, 32P, 49RMS
50/51, 50N/51N, 50G/51G, 46, 50BF, 79, 25, 27D, 27R, 27, 59, 59N, 47, 81H, 81L, 67, 67N, 32P 49RMS
50/51, 50N/51N, 50G/51G, 46, 50BF, 79, 25, 27D, 27R, 27, 59, 59N, 47, 81H, 81L, 81R, 67, 67N, 32P, 37P 49RMS
50/51, 50N/51N, 50G/51G, 46, 49RMS, 38/49T, 23/63, 27, 59, 59N, 47, 81H, 81L, 67N, 67NC, 64REF, 27D, 27R
50/51, 50N/51N, 50G/51G, 46, 49RMS, 38/49T, 23/63, 27, 59, 59N, 47, 81H, 81L, 67, 67N, 67NC, 64REF, 27D, 27R
With advanced UMI
Sepam series 80 Application Type ANSI Price
Substation S80 €2,793
S81 €3,431
S82 €4,959
S84 €5,951
Transformer T81 €4,147
T82 €5,691
T87 €6,891
Motor M81 €3,931
M87 €5,411
M88 €6,411
Generator G82 €6,236
G87 €7,013
G88 €8,043
Busbar B80 €2,744
B83 €3,987
Capacitor C86 €3,144
50/51, 50N/51N, 50G/51G, 46, 50BF, 27D, 27R, 27, 59, 59N, 81H, 81L, 81R, 25
50/51, 50N/51N, 50G/51G, 46, 50BF, 49RMS, 27D, 27R, 27, 59, 59N, 47, 81H, 81L, 38/49T, 51C
50/51, 50N/51N, 50G/51G, 46, 49RMS, 38/49T, 37, 48/51LR/14, 66, 27D, 27R, 27, 59, 67N, 67NC, 32P, 32Q/40, 12, 14, 47, 81H, 81L, 78PS, 87M, 50BF
50/51, 50N/51N, 50G/51G, 46, 49RMS, 38/49T, 37, 48/51LR/14, 66, 27D, 27R, 27, 59, 67N, 67NC, 32P, 32Q/40, 12, 14, 47, 81H, 81L, 26/63, 78PS, 87T, 50BF
50/51, 50N/51N, 50G/51G, 46, 50BF, 49RMS, 32P, 32Q/40, 50V/51V, 27,59, 59N, 47, 81H, 81L, 38/49T, 37P, 40, 12, 14, 21B, 27D, 27R, 26/63, 25, 67, 67N, 67NC, 64REF, 78PS, 50/27, 27TN/64G2, 24
50/51, 50N/51N, 50G/51G, 46, 50BF, 49RMS, 38/49T, 37, 37Q/40, 37P, 27D, 27R, 27, 59, 59N, 47, 67, 67N, 67NC, 32P, 32Q/40, 12, 14, 81H, 81L, 26/63, 40, 78PS, 87M, 21B , 50V/51V, 50/27, 27TN/64G2, 24, 25, 40
50/51, 50N/51N, 50G/51G, 46, 50BF, 49RMS, 38/49T, 37, 37Q/40, 27D, 27R, 27, 59, 59N, 47, 67, 67N, 67NC, 32P, 32Q/40, 12, 14, 81H, 81L, 40, 78PS, 87T, 21B , 50V/51V, 50/27, 27TN/64G2, 24, 25, 64REF
50/51, 50N/51N, 50G/51G, 46, 50BF, 27D, 27R, 27, 59, 59N, 81H, 81L, 81R, 25
50/51, 50N/51N, 50G/51G, 46, 50BF, 79, 25, 27D, 27R, 27, 59, 59N, 47, 81H, 81L, 67, 67N, 32P 49RMS
50/51, 50N/51N, 50G/51G, 46, 50BF, 79, 25, 27D, 27R, 27, 59, 59N, 47, 81H, 81L, 81R, 67, 67N, 32P, 37P 49RMS
50/51, 50N/51N, 50G/51G, 46, 49RMS, 38/49T, 23/63, 27, 59, 59N, 47, 81H, 81L, 67N, 67NC, 64REF, 27D, 27R
50/51, 50N/51N, 50G/51G, 46, 49RMS, 38/49T, 23/63, 27, 59, 59N, 47, 81H, 81L, 67, 67N, 67NC, 64REF, 27D, 27R
50/51, 50N/51N, 50G/51G, 46, 49RMS, 38/49T, 23/63, 27, 59, 59N, 47, 81H, 81L, 67, 67N, 67NC, 64REF, 27D, 27R, 87T
50/51, 50N/51N, 50G/51G, 46, 49RMS, 38/49T, 37, 48/51LR/14, 66, 27D, 27R, 27, 59, 67N, 67NC, 32P, 32Q/40, 12, 14, 47, 81H, 81L, 26/63, 78PS, 50BF
27, 59, 59N, 47, 81H, 81L, 38/49T, 51C
50/51, 50N/51N, 50G/51G, 46, 50BF, 79, 25, 27D, 27R, 27, 59, 59N, 47, 81H, 81L
50/51, 50N/51N, 50G/51G, 46, 50BF, 79, 25, 27D, 27R, 27, 59, 59N, 47, 81H, 81L, 67N, 32P, 49RMS
Schneider Electric SA - NRJED113434EN Page 12 of 65
SEPAM, MiCOM and VAMP Price Guide 2015
With mimic-based UMI
Sepam series 80 Application Type ANSI Price
Substation S80 €3,113
S81 €3,751
S82 €5,279
S84 €6,271
Transformer T81 €4,467
T82 €6,011
T87 €7,211
Motor M81 €4,251
M87 €5,731
M88 €6,731
Generator G82 €6,556
G87 €7,333
G88 €8,363
Busbar B80 €3,064
B83 €4,307
Capacitor C86 €3,464
Logipam option
Logipam SFT080 59711 €643
TCP/IP firmware option
TCP/IP firmware option TCP/IP 59754 €199
50/51, 50N/51N, 50G/51G, 46, 50BF, 49RMS, 32P, 32Q/40, 50V/51V, 27,59, 59N, 47, 81H, 81L, 38/49T, 37P, 40, 12, 14, 21B, 27D, 27R, 26/63, 25, 67, 67N, 67NC, 64REF, 78PS, 50/27, 27TN/64G2, 24
50/51, 50N/51N, 50G/51G, 46, 50BF, 49RMS, 38/49T, 37, 37Q/40, 37P, 27D, 27R, 27, 59, 59N, 47, 67, 67N, 67NC, 32P, 32Q/40, 12, 14, 81H, 81L, 26/63, 40, 78PS, 87M, 21B , 50V/51V, 50/27, 27TN/64G2, 24, 25, 40,
50/51, 50N/51N, 50G/51G, 46, 50BF, 49RMS, 38/49T, 37, 37Q/40, 27D, 27R, 27, 59, 59N, 47, 67, 67N, 67NC, 32P, 32Q/40, 12, 14, 81H, 81L, 40, 78PS, 87T, 21B , 50V/51V, 50/27, 27TN/64G2, 24, 25, 64REF
50/51, 50N/51N, 50G/51G, 46, 50BF, 27D, 27R, 27, 59, 59N, 81H, 81L, 81R, 25
50/51, 50N/51N, 50G/51G, 46, 50BF, 27D, 27R, 27, 59, 59N, 81H, 81L, 81R, 25
50/51, 50N/51N, 50G/51G, 46, 50BF, 49RMS, 27D, 27R, 27, 59, 59N, 47, 81H, 81L, 38/49T, 51C
50/51, 50N/51N, 50G/51G, 46, 49RMS, 38/49T, 23/63, 27, 59, 59N, 47, 81H, 81L, 67N, 67NC, 64REF, 27D, 27R
50/51, 50N/51N, 50G/51G, 46, 49RMS, 38/49T, 23/63, 27, 59, 59N, 47, 81H, 81L, 67, 67N, 67NC, 64REF, 27D, 27R
50/51, 50N/51N, 50G/51G, 46, 49RMS, 38/49T, 23/63, 27, 59, 59N, 47, 81H, 81L, 67, 67N, 67NC, 64REF, 27D, 27R, 87T
50/51, 50N/51N, 50G/51G, 46, 49RMS, 38/49T, 37, 48/51LR/14, 66, 27D, 27R, 27, 59, 67N, 67NC, 32P, 32Q/40, 12, 14, 47, 81H, 81L, 26/63, 78PS, 50BF
50/51, 50N/51N, 50G/51G, 46, 49RMS, 38/49T, 37, 48/51LR/14, 66, 27D, 27R, 27, 59, 67N, 67NC, 32P, 32Q/40, 12, 14, 47, 81H, 81L, 78PS, 87M, 50BF
50/51, 50N/51N, 50G/51G, 46, 49RMS, 38/49T, 37, 48/51LR/14, 66, 27D, 27R, 27, 59, 67N, 67NC, 32P, 32Q/40, 12, 14, 47, 81H, 81L, 26/63, 78PS, 87T, 50BF
50/51, 50N/51N, 50G/51G, 46, 50BF, 79, 25, 27D, 27R, 27, 59, 59N, 47, 81H, 81L
50/51, 50N/51N, 50G/51G, 46, 50BF, 79, 25, 27D, 27R, 27, 59, 59N, 47, 81H, 81L, 67N, 32P, 49RMS
50/51, 50N/51N, 50G/51G, 46, 50BF, 79, 25, 27D, 27R, 27, 59, 59N, 47, 81H, 81L, 67, 67N, 32P 49RMS
50/51, 50N/51N, 50G/51G, 46, 50BF, 79, 25, 27D, 27R, 27, 59, 59N, 47, 81H, 81L, 81R, 67, 67N, 32P, 37P 49RMS
Schneider Electric SA - NRJED113434EN Page 13 of 65
SEPAM, MiCOM and VAMP Price Guide 2015
Accessories Sepam series 10, 20, 40, 60, 80Mounting accessories Reference Price
Mounting plate for Sepam series 20/40 base unit and MCS025 module
AMT840 59670 €95.20
Mounting plate for Sepam series 60/80 base unit AMT880 59706 €103.20
Blanking plate AMT820 59699 €79.20
AMT840 AMT880
Sealing accessories Sepam series 20 - 40 - 60- 80 Reference Price
Sealing accesory for Sepam series 20/40 base unit
AMT852 59639 €84.00
Sealing accessory for Sepam series 60/80 base unit
AMT852 59639 €84.00
AMT852
Software tools Sepam series 20 - 40 - 60- 80 Reference Price
PC connection cord Usb / Usb connection CCA700 59700 €15.20
PC connection cord - RS232 connection CCA783 59664 €15.20
PC connection cord - USB connection CCA784 59671 €47.20
Configuration software CD CD SFT2841 59679 €23.20
Logipam software CD CD SFT 2885 59727 €23.20
IEC 61850 Configuration software CD CD SFT850 59726 €47.20
Input/output modules Reference Price
Sepam series 20 - 40
10 inputs + 4 outputs 24-250 V DC MES114 59646 €279.20
10 inputs + 4 outputs 110-125 V DC / V AC MES114E 59651 €319.20
10 inputs + 4 outputs 220-250 V DC / V AC MES114F 59652 €303.20
Sepam series 60 - 80
MES114 14 inputs + 6 outputs 24-250 V DC MES120 59715 €479.20
MES120 14 inputs + 6 outputs 220-250 V DC MES120G 59716 €503.20
14 inputs + 6 outputs 110-125 V DC MES120H 59722 €495.20
Remote modules and cords Sepam series 20 - 40 - 60- 80 Reference Price
Remote modules
8 temperature sensors module MET148-2 59641 €263.20
Analog output module MSA141 59647 €263.20
Remote advanced UMI module DSM303 59608 €308.00
MSA141 MET148-2 DSM303Remote module connection cord L = 0.6 m CCA770 59660 €8.00MSA141 MET148-2 DSM303Remote module connection cord L = 0.6 m CCA770 59660 €8.00
Remote module connection cord L = 2 m CCA772 59661 €16.00
Remote module connection cord L = 4 m CCA774 59662 €24.00
Synchro-check module
Synchro-check module (with CCA785 connection cord)
MCS025 59712 €799.20
MCS025 connection cord CCA785 59665 €24.00
MCS025
Communication accessories Sepam series 20 - 40 - 60- 80 Reference Price
Sepam communication interfaces
2-wire RS 485 network interface (CCA612 not included)
ACE949-2 59642 €79.20
4-wire RS 485 network interface (CCA612 not included)
ACE959 59643 €103.20
ACE937 ACE949-2 ACE959 Fiber optic interface (CCA612 not included)
ACE937 59644 €135.20
Communication cord L = 3 m CCA612 59663 €24.00
2-wire RS 485 multiprotocol network interface (CCA612 not included)
ACE969TP-2 59723 €599.20
Fiber optic multiprotocol network interface (CCA612 not included)
ACE969FO-2 59724 €679.20
IEC61850 Sepam Server(with surge protection) ECI850 59638 €679.20
ACE 909-2 ACE969TP-2 ACE969FO-2 10/100 baseTX TCP/IP interface * ACE850TP 59658 €959.20
100FX base TCP/IP interface * ACE850FO 59659 €1,119.20
Communication cord L = 3 m for ACE850 module CCA614 59751 €24.00
TCP/IP firmware option * TCP/IP 59754 €199.00
Converters
RS 232 / RS 485 converter AC909-2 59648 €1,119.20
RS 485 / RS 485 interface (AC) ACE919CA 59649 €1,039.20
IEC 61850 RS 485 / RS 485 interface (DC) ACE919CC 59650 €1,076.00
Schneider Electric SA - NRJED113434EN Page 14 of 65
SEPAM, MiCOM and VAMP Price Guide 2015
Sensors Reference Price
Core balance CTs
Residual current sensor Ø 120 CSH120 59635 €167.20
Residual current sensor Ø 200 CSH200 59636 €279.20
Interposing ring CT for residual current input CSH30 59634 €79.20
CSH120 Core balance CT interface ACE990 59672 €959.20
LPCT accessories (1)
LPCT injection adapter ACE917 59667 €2,499.00
Remote LPCT test plug CCA613 59666 €299.00
Spare parts Sepam series 10, 20, 40, 60, 80Spare connectors Reference Price
Sepam
20-pin screw-type connector CCA620 59668 20.80 €
20-pin ring lug connector CCA622 59669 20.80 €
6-pin screw-type connector CCA626 59656 10.40 €
6-pin ring lug connector CCA627 59657 10.40 €
CCA620 CCA622 CCA630 CCA671 CCT6401A / 5A CT current connector CCA630 59630 80.00 €
1A / 5A CT +I0 current connector CCA634 59629 136.00 €
LPCT lateral current connector, series 20&40 CCA670 59631 86.10 €
LPCT radial current connector, series 80 CCA671 59702 86.10 €
VT voltage connector CCT640 59632 86.10 €
Sepam Series 60 - 80 spare parts Reference Price
Sepam base units Sepam series 60
Without UMI SEP060 59835 1,920.00 €
With advanced UMI SEP363 59836 2,080.00 €
With mimic based UMI SEP666 59837 2,280.00 €
Without UMI Advanced UMI Mimic-based UMI Sepam series 80
Without UMI SEP080 59703 2,160.00 €
With advanced UMI SEP383 59704 2,400.00 €
With mimic-based UMI SEP888 59705 2,720.00 €
(1) not available for Sepam serie 10
* for Sepam series 40, 60 & 80 only
Schneider Electric SA - NRJED113434EN Page 15 of 65
MiCOM
SEPAM, MiCOM and VAMP Price Guide 2015 Section: 02- MiCOM Px10 series
MiCOM Px10 Series
TYPE & DESCRIPTION ANSI CASE PRICE
NON DIRECTIONAL OVERCURRENTP111 - EnhancementModel A - 3 Ph O/C and E/F; 4BI/8BO; RS485 (Modbus/IEC103); USB 50/51, 50N/51N, 50BF, 49, 86 FLUSH 592.00 €
Model B - 3 Ph O/C and E/F; 4BI/4BO; RS485 (Modbus/IEC103); USB 50/51, 50N/51N, 50BF, 49, 86 FLUSH 510.00 €
Model E - 3 Ph O/C and E/F; 8BI/6BO; RS485 (Modbus/IEC103); USB 50/51, 50N/51N, 50BF, 49, 86, 46,
79FLUSH 740.00 €
Model N - 3 Ph O/C and E/F; 0BI/6BO; RS485 (Modbus/IEC103); USB 50/51, 50N/51N, 50BF, 49, 86 FLUSH 473.00 €
Model L - 3 Ph O/C and E/F; 0BI/4BO 50/51, 50N/51N, 50BF, 86 FLUSH 387.00 €
Communication Option for Model LOptional rear port RS485 (Modbus/IEC103) 39.00 € Accessories dedicated for all models of P111EnhWall mounting case adaptor 42.00 € Front cover preventing from unauthorised access 61.00 €
SELF/DUAL POWERED OVERCURRENT (CT POWERED)P114D
Self powered three phase overcurrent and earth fault protection, dip switches for setting, wall or flush mounting case, 2 BI and 4 BO, RS485 (Modbus and IEC103)
50/51, 50/51Nsmall
compact830.00 €
Hardware Options
Optional tripping output for sensitive CB coil, striker or MiTOP : 12-24Vdc/0.1J 72.00 € dual powered (aux. power supply ) 89.00 € P115Self powered three phase overcurrent and earth fault protection. Display , wall or flush mounting case. USB front port, 2 BI, 4 BO, RS485 (Modbus and IEC103)
50/51, 50/51N,46, 50BF
small compact
1,145.00 €
Hardware Options
Optional tripping output for sensitive CB coil, striker or MiTOP : 12-24Vdc/0.1J 72.00 €
dual powered (aux. power supply ) 89.00 €
P116 Model A
Dual powered Three Phase Overcurrent and Earth Fault Protection. Display , flush mounting case, USB front port, 6BI, 7BO, RS485 (Modbus and IEC103), energy output for sensitive CB Coil 12-24Vdc/0.1J and external flag indicator 24Vdc/0.01J
37, 46, 46BC, 49, 50, 51, 79 50N, 51N, 50BF, 86
small compact
1,355.00 €
Hardware Options
Binary Inputs: 24-240Vac or 24-250Vdc (standard) -
Binary Inputs with settable switching thesholds (eg.110Vdc/129Vdc/220Vdc) 53.00 €
Additional 4 electro-magnetic flags 174.00 €
Accessories for P116
Wall mounting case adaptor 153.00 €
Flush mounting case adaptor for withdrawable solution 153.00 €
P116 Model LCost Efective Self powered Three Phase Overcurrent and Earth Fault ProtectionDisplay, flush mounting case, USB front port, 1BO + watchdog contact, energy output for sensitive CB Coil 12-24Vdc/0.1J
49, 50, 51, 50N, 51Nsmall
compact1,126.00 €
Accessories for P116
Wall mounting case adaptor 153.00 €
Flush mounting case adaptor for withdrawable solution 153.00 €
FI-10external flag indicator for P114S/D, P115 and P116, flush mounting, 83.00 €
MOTOR PROTECTIONP211- MODEL AThree phase motor protection and control; AC or DC power supply. 2 Binary inputs and 2 Binary outputs.
37, 38, 46, 48, 49, 50/51, 51LR
35mm rail: 100mm mounting case DIN RAIL 283.00 €
106,5mm Flush mounting case FLUSH 302.00 €
P211 - MODEL BThree phase and earth fault motor protection and control; AC or DC power supply. 2 Binary inputs and 2 Binary outputs, Rear port RS485 (modbus);
37, 38, 46, 48, 49, 50/51, 51LR, 50N/51N35mm rail: 100mm mounting case DIN RAIL 410.00 €
106,5mm Flush mounting case FLUSH 443.00 €
P211 - MODEL CThree phase and earth fault motor protection and control; AC or DC power supply. 4 Binary inputs and 4 Binary outputs, Rear port RS485 (modbus);
37, 38, 46, 48, 49, 50/51, 51LR, 50N/51N35mm rail: 100mm mounting case DIN RAIL 454.00 €
106,5mm Flush mounting case FLUSH 488.00 €
Voltage & Frequency ProtectionRefer to the section "06 - VAMP series"
Schneider Electric SA - NRJED113434EN Page 18 of 65
SEPAM, MiCOM and VAMP Price Guide 2015 Section: 03 - MiCOM Px20 series
MiCOM Px20 Series
TYPE & DESCRIPTION ANSI CASE PRICE
MiCOM Single Phase Overcurrent Protection. 2 opto inputs and 4 output relays. 50, 51, 50N, 51N, 86 20TE 828.00 € Product Software optionDefault latest software version - Customer specified and / or customised version On Request
MiCOM Three Phase Overcurrent and Earth Fault Protection. 2 opto inputs and 4 output relays. No records available.
50, 51, 50N, 51N, 86 20TE 894.00 €
Product Software optionDefault latest software version - Customer specified and / or customised version On Request
MiCOM Three Phase Overcurrent and Earth Fault Protection with Thermal Overload, Negative Phase Sequence Protection, breaker failure protection, TCS and Inrush blocking. 3 opto inputs and 6 output relays.
37, 46, 46BC, 49, 50, 51, 50N, 51N, 50BF, 86
20TE 1,075.00 €
P120X Hardware Options
Stabilising resistor for use in high impedance Restricted Earth Fault applications 62.00 €
Product Software optionDefault latest software version - Customer specified and / or customised version On Request
MiCOM Three Phase Overcurrent and Earth Fault Protection with Thermal Overload, Negative Phase Sequence, Circuit breaker monitoring, 4 shots recloser, breaker failure,TCS and Inrush blocking. 5 opto inputs and 8 output relays.
37, 46, 46BC, 49, 50, 51, 50N, 51N, 50BF, 79, 86
20TE 1,437.00 €
Product Software optionDefault latest software version - Customer specified and / or customised version On Request
HW adapted to replace KCGG; same software to P123 Phase 237, 46, 46BC, 49, 50, 51, 50N, 51N,
50BF, 79, 86 20TE 1,444.00 €
Product Software optionDefault latest software version - Customer specified and / or customised version On Request
MiCOM Directional Earth fault relay, with residual overvoltage and wattmetric earth fault protection. 4 opto inputs and 6 output relays.
32N, 50N/67N, 51N/67N, 59N, 86
20TE 975.00 €
Product Software optionDefault latest software version - Customer specified and / or customised version On Request
MiCOM Three Phase Overcurrent and Directional Earth Fault Protection, with 4 shot Auto-reclose, wattmetric earth fault, negative sequence and residual overvoltage protection. 7 opto inputs and 8 output relays.
32N, 37, 46, 46BC, 49, 50, 51, 50N/67N, 51N/67N, 50BF, 59N, 79,
86 30TE 1,797.00 €
Product Software optionDefault latest software version - Customer specified and / or customised version On Request
MiCOM Three Phase Directional Overcurrent and Directional Earth Fault Protection, with under/over voltage, under/over frequency, overpower protection function with 4 shot Auto-reclose and supplementary functions. 7 opto inputs and 8 output relays.
32N, 37, 46, 46BC, 49, 50, 51, 50N/67N, 51N/67N, 50BF, 59N, 79,
86 30TE 1,953.00 €
Product Specific Options12 opto inputs (additional 5 inputs) 404.00 € 2nd RS485 port and modulated/demodulated IRIG-B 389.00 €
12 opto inputs (additional 5 inputs), 2nd RS485 port and modulated/demodulated IRIG-B 557.00 €
2 additional measurements CT 210.00 €
2 add. measurements CT + 12 opto inputs (additional 5 inputs) 614.00 €
2 add. measurements CT + 2nd RS485 port and modulated/demodulated IRIG-B 599.00 €
2 add. measurements CT + 12 opto inputs (additional 5 inputs), 2nd RS485 port and modulated/demodulated IRIG-B
767.00 €
Ethernet 2*RJ45 interfaces, 100Mbps 360.00 €
Product Software option
Default latest software version -
Customer specified and / or customised version On Request
Overcurrent ProtectionP120
P121
P122
P123
P123R - Retrofit solution
P125
P126
P127
Schneider Electric SA - NRJED113434EN Page 19 of 65
SEPAM, MiCOM and VAMP Price Guide 2015 Section: 03 - MiCOM Px20 series
MiCOM Motor Protection. Phase 2 hardware with 6 opto inputs and 6 output relays. Same case size and hardware/software as P225 except P220 does not include a voltage input and voltage protection.
14, 37, 38, 46, 48, 49, 50, 50BF, 51, 50N, 51N, 50S, 51LR, 66, 86
30TE 1,329.00 €
Product Specific Options (RTD or Thermister Module , not both)
6 RTD Input Module 501.00 €
3 thermistor Input Module 294.00 €
2 Analogue Outputs 312.00 €
11 opto inputs (additional 5 inputs), 2nd RS485 port and modulated/demodulated IRIG-B 557.00 €
Product Software option
Default latest software version -
Customer specified and / or customised version On Request
MiCOM Motor Protection with single phase voltage input. 6 opto inputs and 6 output contacts
14, 27, 37, 38, 46, 48, 49, 50, 50BF, 51, 50N, 51N, 50S, 51LR, 59, 66, 86
30TE 1,899.00 €
Product Specific Options (RTD or Thermister Module , not both)
10 RTD Input Module OR 501.00 €
3 thermistor Input Module 293.00 €
2 Analogue Outputs 311.00 €
11 opto inputs (additional 5 inputs), 2nd RS485 port and modulated/demodulated IRIG-B 557.00 €
Ethernet 2*RJ45 interfaces, 100Mbps 360.00 €
Product Software option
Default latest software version -
Customer specified and / or customised version On Request
MiCOM Motor Protection with three phase voltage input. 6 opto inputs and 6 output contacts
14, 27, 37, 38, 46, 48, 49, 50, 50BF, 51, 50N, 51N, 50S, 51LR, 59, 66, 86
30TE 2,298.00 €
Product Specific Option
11 opto inputs (additional 5 inputs), 2nd RS485 port and modulated/demodulated IRIG-B 557.00 €
Ethernet 2*RJ45 interfaces, 100Mbps 360.00 €
Product Software optionDefault latest software version - Customer specified and / or customised version On Request
MiCOM feeder differential protection, 2-end, 5 binary inputs and 8 output relays.87L, 50/50N, 51/51N, 64, 46, 49,
46BC30TE
EIA RS232 version 2,832.00 € EIA RS485 version 2,832.00 €
850nm fibre optic interface version 2,980.00 €
1300nm fibre optic interface versions (Single or Multimode) 3,790.00 €
P521 Options and Accessories
MT-RS485 surge protection module 116.00 €
PCM-FLU10 isolating transformer 10kV 419.00 €
PCM-FLU20l isolating transformer 20kV 475.00 €
TD-36 DC voice modem, for conditioned pilots 1,313.00 €
MODEM : Keymile Linerunner DTM Modem - (V36 interface included) 1,313.00 €
P520L Loopback test Box VA0041-010 1,051.00 €
Ethernet 2*RJ45 interfaces, 100Mbps 360.00 €
Product Software optionDefault latest software version - Customer specified and / or customised version On Request
P225 - SINGLE VOLTAGE INPUT - Phase 2
Motor ProtectionP220 - Phase 2
P225 - THREE VOLTAGE INPUT - Phase 2
Line Differential ProtectionP521 - Phase 2
Schneider Electric SA - NRJED113434EN Page 20 of 65
SEPAM, MiCOM and VAMP Price Guide 2015 Section: 03 - MiCOM Px20 series
P591 G703 Interface Module for the P540 range, P521, P443 & P445. 1,298.00 €
P593 X21 Interface Module for the P540 range, P521, P443 & P445. 1,582.00 €
P594 High accuracy GPS synchronising module. Also used with P543 - P546 for unequal propogation delay SONET/SDH communications. New enhanced model with IRIG-B, pulse and fibre outputs for use as the single substation time reference.
P594 GPS module only 2,186.00 €
25 metre cable, antenna and surge arrester 986.00 €
50 metre cable, antenna, surge arrester and amplifier 1,586.00 €
P595 Interface Device 2,020.00 €
P-2M-LXA 850nm Multi-mode MICOM G703 Optic/Electric Interface Unit for the P540 range, P521, P443, P445 & P446.
19", 1U rack 1,629.00 €
P-2M-LXB 1300nm Single mode MICOM G703 Optic/Electric Interface Unit for the P540 range, P521, P443, P445 & P446.
19", 1U rack 2,029.00 €
Short-haul direct EAI 485 pilot connection (4 wire) up to 1.2km Comprising 2 x P521, and 2 x MT485.
P521 SCHEME A 5,896.00 €
Conditioned pilots (2 wire) scheme, MODEM link Comprising 2 x P521, and 2 x TD-36 modems.
P521 SCHEME B 8,291.00 €
Conditioned pilots (4 wire) scheme, MODEM link Comprising 2 x P521, and 2 x TD-36 modems.
P521 SCHEME C 8,291.00 €
Direct pilot connection (2 wire), up to 16km with 10kV pilot isolation Comprising 2 x P521, 2 x DTM modems, and 2 x 10kV PCM-FLU.
P521 SCHEME D 9,129.00 €
Direct pilot connection (2 wire), up to 16km with 20kV pilot isolation Comprising 2 x P521, 2 x DTM modems, and 2 x 20kV PCM-FLU.
P521 SCHEME E 9,241.00 €
Direct EAI 485 pilot connection (4 wire), up to 25km with 10kV pilot isolation Comprising 2 x P521, 2 x P595, and 4 x 10kV PCM-FLU.
P521 SCHEME F 11,434.00 €
Direct EAI 485 pilot connection (4 wire), up to 25km with 20kV pilot isolation Comprising 2 x P521, 2 x P595, and 4 x 20kV PCM-FLU.
P521 SCHEME G 11,670.00 €
NOTE: PRICE IS FOR LOOSE EQUIPMENT ONLY, SEND AND RECEIVE ENDS INCLUDED, NO TEST BLOCKS
MiCOM Numerical Restricted Earth Fault protection relay, 2 opto inputs and 4 output contacts.
64 20TE 893.00 €
Product Software optionDefault latest software version - Customer specified and / or customised version On Request
MiCOM Numerical High Impedance Busbar protection, 5 opto inputs and 8 output contacts. Includes REF protection as a complementary alternative application.
87, (64) 20TE 1,586.00 €
Product Software optionDefault latest software version - Customer specified and / or customised version On Request
Accessory for use with P721 in numerical high impedance REF protection schemes. Includes stabilising resistors, and repeat contact for buswire shorting. Convenient housing in a MiCOM case.
20TE
Base model without buswire voltage limiting (use external Metrosil - price not included here)
473.00 €
Model with integral varistance for buswire voltage limitation 609.00 € Model with additional varistance for higher energy dissipation 746.00 €
Accessory for use with P723 in numerical high impedance busbar protection schemes. Includes stabilising resistors, and repeat contact for buswire shorting. Convenient housing in a MiCOM case.
30TE
Base model without buswire voltage limiting (use external Metrosil - price not included here)
536.00 €
Model with integral varistance for buswire voltage limitation 946.00 € Model with additional varistance for higher energy dissipation 1,355.00 €
Stabilising resistor for use with P121, P122 or P141 relays in numerical high impedance applications. Use one per phase.
bop 62.00 €
Stabilising Resistor
P59x suffix B
P-2M-L
MiCOM P521 Standard Schemes
High Impedance Differential ProtectionP721
P723
P791
P793
Schneider Electric SA - NRJED113434EN Page 21 of 65
SEPAM, MiCOM and VAMP Price Guide 2015 Section: 03 - MiCOM Px20 series
MiCOM stand-alone breaker failure relay, for single and three pole tripping applications. Includes undercurrent check, plus two timer stages for re-tripping and backtripping, phase, residual and negative sequence current detection, dead zone protection, current measurement based pole discrepancy. 5 binary inputs and 8 output relays.
50BF 20TE 1,173.00 €
Product Software optionDefault latest software version - Customer specified and / or customised version On Request
MiCOM voltage and neutral displacement protection with under/over voltage elements. 2 inputs and 4 outputs.
27, 59, 59N 20TE 937.00 €
Product Software optionDefault latest software version - Customer specified and / or customised version On Request
MiCOM Voltage and neutral displacement Protection, with under/ over voltage and under/over frequency protection. 5 inputs and 8 outputs
27, 27D, 47, 59, 59N, 81U, 81O 20TE 1,419.00 €
Product Software optionDefault latest software version - Customer specified and / or customised version On Request
MiCOM Voltage and frequency protection with under/ over voltage, under/over frequency, dF/dt and dV/dt protection. 5 inputs and 8 outputs
27, 27D, 27/59R, 47, 59, 59N, 81U, 81O, 81R
20TE 1,791.00 €
Product Software optionDefault latest software version - Customer specified and / or customised version On Request
RS232/USB cable for MiCOM relays (can be used to supply MiCOM Px2x relays through front RS232 port)
200.00 €
Isliker Striker for self powered relays (GPA-50.1 / V668) 438.00 €
Capacitor trip unit (additional energy to drive higher wattage trip coils). 503.00 €
Accessories & CablesE2 - RS232/USB cable
STRIKER
E124 - Capacitor trip unit
Breaker Fail ProtectionP821 Phase 2
Voltage & Frequency ProtectionP921 Phase 2
P922 Phase 2
P923 Phase 2
Schneider Electric SA - NRJED113434EN Page 22 of 65
SEPAM, MiCOM and VAMP Price Guide 2015 Section: 04 - MiCOM Px30 series
MiCOM Px30 Series
TYPE & DESCRIPTION ANSI PRICE
MiCOM non-directional Feeder Management with auto-reclose and motor protection. Surface-/flush-mounting compact case, 2 binary inputs and 8 output relays, pin-terminals, with CT inputs only.
50/51, 50N/51N, 85, 79, 37, 48, 49, 49LR, 50S, 66, 46, 50BF, 86
1,863.00 €
Software OptionsDefault Software Version -
Customer specified and / or customised version Please contact Schneider Electric On Request
Communications Options
Protocol switchable: IEC 60870-5-101/-103, Modbus, DNP3.0 and IRIG-B input, incl. 2nd
rear port (RS 485, Optical interface, IEC 60870-5-103)474.00 €
InterMiCOM full-duplex protection signalling interface 481.00 €
MiCOM Feeder Management with auto-reclose and motor protection. Surface-/flush-mounting compact case, 2 binary inputs and 8 output relays, pin-terminals, with CT and VT inputs.
50/51, 50N/51N, 67P,67N, 67W/YN, 85, 79, 37, 48, 49, 49LR, 50S, 66, 46, 27, 47, 59, 81,32, 50BF, 86
2,111.00 €
Software OptionsDefault Software Version -
Customer specified and / or customised version Please contact Schneider Electric On Request
Communications Options
Protocol switchable: IEC 60870-5-101/-103, Modbus, DNP3.0 and IRIG-B input, incl. 2nd
rear port (RS 485, Optical interface, IEC 60870-5-103)474.00 €
InterMiCOM full-duplex protection signalling interface 481.00 €
MiCOM Feeder Management with auto-reclose and motor protection. Basic device with 4-pole CT inputs, 4 binary inputs and 8 output relays, 6 function keys, wall or flush mounting case.
50/51, 50N/51N, 50BF, 85, 79, 37, 46, 48, 66, 49, 49LR, 50S, 86
Pin terminal model 2,096.00 € Ring terminals on ac measurements inputs (heavy duty terminal block), pin-terminals on binary I/O
2,149.00 €
Pin terminal model 2,339.00 € Ring terminals on ac measurements inputs (heavy duty terminal block), pin-terminals on binary I/O
2,391.00 €
Ring terminal model 2,512.00 € Software OptionsDefault Software Version - Customer specified and / or customised version Please contact Schneider Electric On RequestProduct Specific Options
4VT input module for directionalising 67P, 67N, 67W/YN, 27, 47, 59, 32 583.00 €
Alternative 5VT module for directional plus synch. Check 67P, 67N, 67W/YN, 27, 47, 59, 32, 25 1,142.00 € Transient ground fault evaluation module 406.00 € RTD interface module 494.00 € Higher switching thresholds on binary inputs 112.00 € Detachable HMI (DHMI) 562.00 € First control-I/O module (with 6 binary inputs and 6 binary outputs) provided with high speed high break contacts (1-pole)
189.00 €
Both control-I/O modules (with 6 binary inputs and 6 binary outputs) provided with high speed high break contacts (1-pole)
378.00 €
Hardware OptionsModule with 6 binary inputs and 3 output relays 326.00 € Module with 6 binary inputs and 6 output relays 521.00 € Module with 6 binary inputs and 8 output relays 415.00 € Module with 6 output relays 209.00 € Module with 4 high speed high break contacts 313.00 € Binary module with 24 binary inputs 736.00 € Analogue I/O module 492.00 € Communications OptionsProtocol switchable: IEC 60870-5-101/-103, Modbus, DNP3.0 and IRIG-B input, incl. 2nd
rear port (RS 485, Optical interface, IEC 60870-5-103)474.00 €
IEC 61850 Ethernet communications (Single Port) 495.00 € Redundant Ethernet (2 ports 1300nm Multimode) with IRIG-B 765.00 €
InterMiCOM full-duplex protection signalling interface 481.00 €
CASE
Non-Directional Overcurrent ProtectionP130C
Compact
Compact
Directional Overcurrent ProtectionP130C
40TE
40TE
84TE
INTEGRATED FEEDER MANAGEMENTP132
24TE
24TE
Schneider Electric SA - NRJED113434EN Page 23 of 65
SEPAM, MiCOM and VAMP Price Guide 2015 Section: 04 - MiCOM Px30 series
MiCOM One Box Numerical Feeder Management, non-directional time o/c and sens.e/f protection with bay unit for control/ monitoring, with auto-reclose and motor protection. Basic device with 4-pole CT inputs only, 10 binary inputs and 14 output relays, wal
50/51, 50N/51N, 50BF, 85, 79, 37, 46, 48, 66, 49, 49LR, 50S, 86
Pin terminal model 3,443.00 € Ring terminals on AC measurements inputs (heavy duty terminal block), pin-terminals on binary I/O
3,496.00 €
Ring terminal model 3,597.00 € Software OptionsDefault Software Version - Customer specified and / or customised version Please contact Schneider Electric On RequestProduct Specific Options
4VT input module for directionalising 67P, 67N, 67W/YN, 27, 47, 59, 32 583.00 €
Alternative 5VT module for directional plus synch. Check 67P, 67N, 67W/YN, 27, 47, 59, 32, 25 1,142.00 € Transient ground fault evaluation module 406.00 € RTD interface module 494.00 € Higher switching thresholds on binary inputs 112.00 € Detachable HMI (DHMI) 562.00 € First control-I/O module (with 6 binary inputs and 6 binary outputs) provided with high speed high break contacts (1-pole)
189.00 €
Both control-I/O modules (with 6 binary inputs and 6 binary outputs) provided with high speed high break contacts (1-pole)
378.00 €
Hardware OptionsModule with 6 binary inputs and 3 output relays 326.00 € Module with 6 binary inputs and 6 output relays 521.00 € Module with 6 output relays 209.00 € Module with 4 high speed high break contacts 313.00 € Binary Module with 24 binary inputs 736.00 € Analogue I/O Module 492.00 € Communications OptionsProtocol switchable: IEC 60870-5-101/-103, Modbus, DNP3.0 and IRIG-B input, incl. 2nd
rear port (RS 485, Optical interface, IEC 60870-5-103)474.00 €
IEC 61850 Ethernet communications (Single Port) 495.00 €
Redundant Ethernet (2 ports 1300nm Multimode) with IRIG-B 765.00 €
InterMiCOM full-duplex protection signalling interface 481.00 €
Distance protection, 3-pole tripping, basic complement 2 binary inputs and 8 output relays, surface-mounting or flush-mounting, local control panel with text display,
21P/N, 68, 85, 79, 25, 50P/Q/N, 51P/Q/N, 67P/Q/N, 49, 27P,
59P/Q/N/G, 81O/U/R, 325,028.00 €
Software Options
Default Software Version -
Customer specified and / or customised version Please contact Schneider Electric On Request
Communications Options
protocol switchable: IEC 60870-5-101/-103, Modbus, DNP3.0 and IRIG-B input, incl. 2nd
rear port (RS 485, IEC 60870-5-103)474.00 €
InterMiCOM full-duplex protection signalling interface 481.00 €
P139
40TE
40TE
84TE
LINE / CABLE DISTANCEP430C
compact
Schneider Electric SA - NRJED113434EN Page 24 of 65
SEPAM, MiCOM and VAMP Price Guide 2015 Section: 04 - MiCOM Px30 series
Distance protection, 3-pole tripping, basic complement 4 binary inputs and 8 output relays, surface-mounting or flush-mounting, local control panel with text display,
21P/N, 68, 68T, 85, 79, 25, 50P/Q/N, 51P/Q/N, 67P/Q/N, 49, 27P, 59P/Q/N/G, 81O/U/R, 32,
50BF
basic device, pin-terminal connection 6,813.00 €
basic device, ring-terminal connection 8,266.00 €
Software Options
Default Software Version -
Customer specified and / or customised version Please contact Schneider Electric
Product Specific Options
Higher switching thresholds on binary inputs 112.00 €
Voltage-measuring input for synchrocheck 131.00 €
Detachable HMI (DHMI) 562.00 €
Hardware Options
Module with 6 output relays 209.00 €
Module with 6 binary inputs and 3 output relays 326.00 € Module with 6 binary inputs and 6 output relays 521.00 € Module with 4 high speed high break contacts 313.00 €
Module with 6 binary inputs and 8 output relays 415.00 €
Transient ground fault evaluation module 406.00 €
Module with 24 binary inputs 736.00 € Analogue I/O module 492.00 €
Communications Options
protocol switchable: IEC 60870-5-101/-103, Modbus, DNP3.0 and IRIG-B input, incl. 2nd
rear port (RS 485, IEC 60870-5-103)474.00 €
with IEC 61850 ethernet communications (Single Port) 495.00 €
Redundant Ethernet (2 ports 1300nm Multimode) with IRIG-B 765.00 €
InterMiCOM full-duplex protection signalling interface 481.00 €
Distance protection, 1/3-pole tripping, basic complement 4 binary inputs and 8 output relays, surface-mounting or flush-mounting, local control panel with text display,
21P/N, 68, 68T, 85, 79, 25, 50P/Q/N, 51P/Q/N, 67P/Q/N, 49, 27P, 59P/Q/N/G, 81O/U/R, 32,
50BF
basic device, pin-terminal connection 8,299.00 €
basic device, pin-terminal connection 9,120.00 €
basic device, ring-terminal connection 9,220.00 €
Software Options
Default Software Version -
Customer specified and / or customised version Please contact Schneider Electric On Request
Product Specific Options
Higher switching thresholds on binary inputs 112.00 €
Voltage-measuring input for synchrocheck 131.00 €
Detachable HMI (DHMI) 562.00 €
Hardware Options
Module with 6 output relays 209.00 €
Module with 6 binary inputs and 3 output relays 326.00 € Module with 6 binary inputs and 6 output relays 521.00 €
Module with 4 high speed high break contacts 313.00 €
Module with 6 binary inputs and 8 output relays 415.00 €
Transient ground fault evaluation module 406.00 €
Module with 24 binary inputs 736.00 €
Analogue I/O module 492.00 €
Communications Options
protocol switchable: IEC 60870-5-101/-103, Modbus, DNP3.0 and IRIG-B input, incl. 2nd
rear port (RS 485, IEC 60870-5-103)474.00 €
with IEC 61850 ethernet communications (Single Port) 495.00 €
Redundant Ethernet (2 ports 1300nm Multimode) with IRIG-B 765.00 €
InterMiCOM full-duplex protection signalling interface 481.00 €
40TE
84TE
P433
84TE
P435
40TE
84TE
Schneider Electric SA - NRJED113434EN Page 25 of 65
SEPAM, MiCOM and VAMP Price Guide 2015 Section: 04 - MiCOM Px30 series
Distance protection, full scheme, basic complement 4 binary inputs and 8 output relays, surface-mounting or flush-mounting, local control panel with text display,
21P/N, 68, 68T, 85, 79, 25, 50P/Q/N, 51P/Q/N, 67P/Q/N, 49, 27P, 59P/Q/N/G, 81O/U/R, 32,
50BF
basic device, pin-terminal connection 13,359.00 €
basic device, ring-terminal connection 13,459.00 €
Software Options
Default Software Version -
Customer specified and / or customised version Please contact Schneider Electric On Request
Product Specific Options
Higher switching thresholds on binary inputs 112.00 €
Voltage-measuring input for synchrocheck 131.00 €
Current-measuring input for mutual compensation 418.00 €
Hardware Options
Module with 6 output relays 209.00 €
Module with 6 binary inputs and 8 output relays 415.00 €
Communications Options
protocol switchable: IEC 60870-5-101/-103, Modbus, DNP3.0 and IRIG-B input, incl. 2nd
rear port (RS 485, IEC 60870-5-103)474.00 €
with IEC 61850 ethernet communications (Single Port) 495.00 €
Redundant Ethernet (2 ports 1300nm Multimode) with IRIG-B 765.00 €
InterMiCOM full-duplex protection signalling interface 481.00 €
Distance protection (3-pole tripping) with bay unit for control and monitoring (one-box), basic complement 4 binary inputs and 8 output relays and 6 binary inputs and 6 output relays for the control of 3 switchgear units, surface-mounting or flush-mounting, local control panel with graphic display,
21P/N, 68, 68T, 85, 79, 25, 50P/Q/N, 51P/Q/N, 67P/Q/N, 49, 27P, 59P/Q/N/G, 81O/U/R, 32,
50BF
basic device, pin-terminal connection 8,224.00 €
basic device, ring-terminal connection 9,486.00 €
Software Options
Default Software Version -
Customer specified and / or customised version Please contact Schneider Electric On Request
Product Specific Options
Higher switching thresholds on binary inputs 112.00 €
Voltage-measuring input for synchrocheck 131.00 €
Detachable HMI (DHMI) 562.00 €
First control-I/O module (with 6 binary inputs and 6 binary outputs) provided with high speed high break contacts (1-pole)
189.00 €
Both control-I/O modules (with 6 binary inputs and 6 binary outputs) provided with high speed high break contacts (1-pole)
378.00 €
Hardware Options
Module with 6 binary inputs and 6 output relays 521.00 €
Module with 6 output relays 209.00 €
Module with 6 binary inputs and 3 output relays 326.00 €
Module with 4 high speed high break contacts 313.00 €
Transient ground fault evaluation module 406.00 €
Analogue I/O module 492.00 €
Binary module with 24 binary inputs 736.00 €
Communications Options
protocol switchable: IEC 60870-5-101/-103, Modbus, DNP3.0 and IRIG-B input, incl. 2nd
rear port (RS 485, IEC 60870-5-103)474.00 €
with IEC 61850 ethernet communications (Single Port) 495.00 €
Redundant Ethernet (2 ports 1300nm Multimode) with IRIG-B 765.00 €
InterMiCOM full-duplex protection signalling interface 481.00 €
84TE
84TE
P437
P439
40TE
84TE
Schneider Electric SA - NRJED113434EN Page 26 of 65
SEPAM, MiCOM and VAMP Price Guide 2015 Section: 04 - MiCOM Px30 series
MiCOM feeder differential protection, 2-end, with auto-reclose. Surface-/flush-mounting compact case, 2 binary inputs and 8 output relays, pin-terminals. Including guidance interface PCOMM
87P, 50P/Q/N, 51P/Q/N, 50/27, 79, 46, 49, 50BF
3,053.00 €
Product Specific Options
3 pole voltage inputs 67, 85, 32, 67N, 27P/Q/N, 59P/Q/N 420.00 €
Communications Options
Protocol switchable: IEC 60870-5-101/-103, Modbus, DNP3.0 and IRIG-B input, incl. 2nd
rear port (RS 485, Optical interface, IEC 60870-5-103)474.00 €
P530C Options and AccessoriesMT-RS485 surge protection module 116.00 € PCM-FLU20l isolating transformer 20kV 475.00 € P53x or InterMiCOM Accessories
CZ-922 : Power supply module 24 V, Vin: 36 to 264 V DC and 82 to 240 V AC 384.00 €
OZD-485 : Converter glass fibre (Monomode 10/125µm, ST) into RS485 2,627.00 €
MiCOM Feeder differential protection, 2-end, with auto-reclose. Basic device with 4-pole CT inputs only, 4 binary inputs and 8 output relays, Text-HMI with 6 function keys, wall or flush mounting case. Including guidance interface PCOMM.
87P, 50P/Q/N, 51P/Q/N, 50/27, 79, 46, 49, 50BF
Pin terminal model 3,598.00 € Ring terminals on ac measurements inputs (heavy duty terminal block), pin-terminals on binary I/O
3,651.00 €
Pin terminal model 4,166.00 € Ring terminal model 4,313.00 € Software OptionsDefault Software Version - Customer specified and / or customised version Please contact Schneider Electric On RequestProduct Specific Options
4VT input module for directionalising 67P, 67N, 67W/YN, 27, 47, 59, 32 583.00 €
Alternative 5VT module for directional plus synch. Check67P, 67N, 67W/YN, 27, 47, 59, 32,
251,142.00 €
Transient ground fault evaluation module 406.00 €
RTD interface module 494.00 €
Higher switching thresholds on binary inputs 112.00 €
Graphical-HMI for full control functionality (depend on the number of control I/O-module (with 6 binary inputs and 6 binary outputs)
683.00 €
Control-I/O module (with 6 binary inputs and 6 binary outputs) provided with high speed high break contacts (1-pole)
189.00 €
Hardware OptionsModule with 6 binary inputs and 3 output relays 326.00 €
Module with 6 binary inputs and 6 output relays 521.00 €
Module with 6 binary inputs and 8 output relays 415.00 €
Module with 6 output relays 209.00 €
Module with 4 high speed high break contacts 313.00 €
Binary Module with 24 binary inputs 736.00 € Analogue I/O module 492.00 € Communications OptionsProtocol switchable: IEC 60870-5-101/-103, Modbus, DNP3.0 and IRIG-B input, incl. 2nd
rear port (RS 485, Optical interface, IEC 60870-5-103)474.00 €
with IEC 61850 ethernet communications (Single Port) 495.00 €
Redundant Ethernet (2 ports 1300nm Multimode) with IRIG-B 765.00 €
P532 AccessoriesMT-RS485 surge protection module 116.00 € PCM-FLU20 isolating transformer 20kV 475.00 €
P53x or InterMiCOM Accessories
CZ-922 : Power supply module 24 V, Vin: 36 to 264 V DC and 82 to 240 V AC 384.00 €
OZD-485 : Converter glass fibre (Monomode 10/125µm, ST) into RS485 2,627.00 €
LINE DIFFERENTIAL P530C
84TE84TE
DIN-Rail
DIN-Rail
P532
40TE
40TE
DIN-Rail
DIN-Rail
Schneider Electric SA - NRJED113434EN Page 27 of 65
SEPAM, MiCOM and VAMP Price Guide 2015 Section: 04 - MiCOM Px30 series
Numerical transformer differential protection, 2-end, basic complement 2 binary inputs and 8 output relays, surface-mounting or flush-mounting, local control panel with text display,
87T, 50P/Q/N/G, 51P/Q/N/G, 49 3,079.00 €
Software Options
Default Software Version -
Customer specified and / or customised version Please contact Schneider Electric On Request
Communications Options
protocol switchable: IEC 60870-5-101/-103, Modbus, DNP3.0 and IRIG-B input, incl. 2nd
rear port (RS 485, IEC 60870-5-103)474.00 €
InterMiCOM full-duplex protection signalling interface 481.00 €
Transformer differential protection, 2-end, basic complement 4 binary inputs and 8 output relays, surface-mounting or flush-mounting, local control panel with text display,
87T, 50P/Q/N/G, 51P/Q/N/G, 49, 50BF
basic device, pin-terminal connection 3,261.00 €
basic device, ring-terminal connection 3,366.00 €
Software Options
Default Software Version -
Customer specified and / or customised version Please contact Schneider Electric
Product Specific Options
Higher switching thresholds on binary inputs 112.00 €
Detachable HMI (DHMI) 562.00 €
Hardware Options
module with 6 output relays 209.00 €
module with 4 high speed high break contacts 313.00 €
Communications Options
protocol switchable: IEC 60870-5-101/-103, Modbus, DNP3.0 and IRIG-B input, incl. 2nd
rear port (RS 485, IEC 60870-5-103)474.00 €
with IEC 61850 ethernet communications (Single Port) 495.00 €
Redundant Ethernet (2 ports 1300nm Multimode) with IRIG-B 765.00 €
Transformer differential protection, 2-end, basic complement 4 binary inputs and 8 output relays, surface-mounting or flush-mounting, local control panel with text display,
87T/N(REF), 50P/Q/N/G, 51P/Q/N/G, 49, 81O/U/R, 27, 59,
24, 50BF
basic device, pin-terminal connection 3,764.00 €
basic device, ring-terminal connection 4,239.00 €
Software Options
Default Software Version -
Customer specified and / or customised version Please contact Schneider Electric On Request
Product Specific Options
Higher switching thresholds on binary inputs 112.00 €
Detachable HMI (DHMI) 562.00 €
Hardware Options
module with 6 binary inputs and 6 output relays 521.00 €
module with 6 binary inputs and 8 output relays 415.00 €
binary module with 24 binary inputs 736.00 €
analogue I/O module 492.00 €
module with 6 output relays 209.00 €
module with 4 high speed high break contacts 313.00 €
Communications Options (P632)
protocol switchable: IEC 60870-5-101/-103, Modbus, DNP3.0 and IRIG-B input, incl. 2nd
rear port (RS 485, IEC 60870-5-103)474.00 €
with IEC 61850 ethernet communications (Single Port) 495.00 €
Redundant Ethernet (2 ports 1300nm Multimode) with IRIG-B 765.00 €
P631
INTEGRATED TRANSFORMER MANAGEMENTP630C
Compact
40TE
40TE
84TE
P632
40TE
Schneider Electric SA - NRJED113434EN Page 28 of 65
SEPAM, MiCOM and VAMP Price Guide 2015 Section: 04 - MiCOM Px30 series
Transformer differential protection, 3-end, basic complement 4 binary inputs and 8 output relays, surface-mounting or flush-mounting, local control panel with text display,
87T/N(REF), 50P/Q/N/G, 51P/Q/N/G, 49, 81O/U/R, 27, 59,
24, 50BF
basic device, pin-terminal connection 4,338.00 €
basic device, pin-terminal connection 4,777.00 €
basic device, ring-terminal connection 4,881.00 €
Software Options
Default Software Version -
Customer specified and / or customised version Please contact Schneider Electric On Request
Product Specific Options
Higher switching thresholds on binary inputs 112.00 €
Detachable HMI (DHMI) 562.00 €
Hardware Options
module with 6 binary inputs and 6 output relays 521.00 €
module with 6 binary inputs and 8 output relays 415.00 €
binary module with 24 binary inputs 736.00 €
analogue I/O module 492.00 €
module with 6 output relays 209.00 €
module with 4 high speed high break contacts 313.00 €
Communications Options
protocol switchable: IEC 60870-5-101/-103, Modbus, DNP3.0 and IRIG-B input, incl. 2nd
rear port (RS 485, IEC 60870-5-103)474.00 €
with IEC 61850 ethernet communications (Single Port) 495.00 €
Redundant Ethernet (2 ports 1300nm Multimode) with IRIG-B 765.00 €
Transformer differential protection, 4-end, basic complement 4 binary inputs and 8 output relays, surface-mounting or flush-mounting, local control panel with text display,
87T/N(REF), 50P/Q/N/G, 51P/Q/N/G, 49, 81O/U/R, 27, 59,
24, 50BF
basic device, pin-terminal connection 5,349.00 €
basic device, ring-terminal connection 5,455.00 €
Software Options
Default Software Version -
Customer specified and / or customised version Please contact Schneider Electric On Request
Product Specific Options
Higher switching thresholds on binary inputs 112.00 €
Detachable HMI (DHMI) 562.00 €
Hardware Options
module with 6 binary inputs and 8 output relays 415.00 €
binary module with 24 binary inputs 736.00 €
analogue I/O module 492.00 €
module with 6 output relays 209.00 €
module with 4 high speed high break contacts 313.00 €
Communications Options
protocol switchable: IEC 60870-5-101/-103, Modbus, DNP3.0 and IRIG-B input, incl. 2nd
rear port (RS 485, IEC 60870-5-103)474.00 €
with IEC 61850 ethernet communications (Single Port) 495.00 €
Redundant Ethernet (2 ports 1300nm Multimode) with IRIG-B 765.00 €
P633
40TE
84TE
84TE
P634
84TE
84TE
Schneider Electric SA - NRJED113434EN Page 29 of 65
SEPAM, MiCOM and VAMP Price Guide 2015 Section: 04 - MiCOM Px30 series
MiCOM Voltage and Frequency relay. Surface-/flush-mounting compact case, 2 binary inputs and 8 output relays, pin-terminals. (VT only model without CT inputs).
27, 47, 59, 81 1,902.00 €
Software OptionsDefault Software Version -
Customer specified and / or customised version On Request
Communications Options
Protocol switchable: IEC 60870-5-101/-103, Modbus, DNP3.0 and IRIG-B input, incl. 2nd
rear port (RS 485, Optical interface, IEC 60870-5-103)474.00 €
InterMiCOM full-duplex protection signalling interface 481.00 €
MiCOM Numerical voltage and frequency relay. With 4-pole VT inputs only, 4 binary inputs and 8 output relays, wall or flush mounting case.
27, 47, 59, 81
Pin terminal model 2,448.00 € Ring terminals on ac measurements inputs (heavy duty terminal block), pin-terminals on binary I/O
2,500.00 €
Pin terminal model 2,526.00 € Ring terminals on ac measurements inputs (heavy duty terminal block), pin-terminals on binary I/O
2,579.00 €
Ring terminal model 2,726.00 € Software OptionsDefault Software Version - Customer specified and / or customised version Please contact Schneider Electric On RequestProduct Specific OptionsHigher switching thresholds on binary inputs 112.00 € Detachable HMI (DHMI) 562.00 € First control-I/O module (with 6 binary inputs and 6 binary outputs) provided with high speed high break contacts (1-pole)
189.00 €
Both control-I/O modules (with 6 binary inputs and 6 binary outputs) provided with high speed high break contacts (1-pole)
378.00 €
Hardware OptionsModule with 6 binary inputs and 3 output relays 326.00 € Module with 6 binary inputs and 6 output relays 521.00 € Module with 6 binary inputs and 8 output relays 415.00 € Module with 6 output relays 209.00 € Module with 4 high speed high break contacts 313.00 € Binary module with 24 binary inputs 736.00 € Analogue I/O module 492.00 € Communications Options
Protocol switchable: IEC 60870-5-101/-103, Modbus, DNP3.0 and IRIG-B input, incl. 2nd
rear port (RS 485, Optical interface, IEC 60870-5-103)474.00 €
IEC 61850 Ethernet communications (Single Port) 495.00 €
Redundant Ethernet (2 ports 1300nm Multimode) with IRIG-B 765.00 €
InterMiCOM full-duplex protection signalling interface 481.00 €
VOLTAGE & FREQUENCYP130C
Compact
24TE
40TE
40TE
84TE
P132
24TE
Schneider Electric SA - NRJED113434EN Page 30 of 65
SEPAM, MiCOM and VAMP Price Guide 2015 Section: 04 - MiCOM Px30 series
Overcurrent protection for railway systems, basic complement 4 binary inputs and 8 output relays, surface-mounting or flush-mounting, local control panel with text display. (Alternative: P120 for 50 and 60Hz systems)
50, 51, 27, 59, 50BF
basic device, pin-terminal connection On Request
basic device, pin-terminal connection On Request
basic device, ring-terminal connection On Request
Software Options
Default Software Version -
Customer specified and / or customised version On Request
Product Specific Options
Higher switching thresholds on binary inputs 112.00 €
VT input for directionalising 27, 67, 59 On Request
Hardware Options
module with 6 binary inputs and 8 output relays 415.00 €
module with 6 output relays 209.00 €
module with 4 high speed high break contacts 313.00 €
module with 6 binary inputs and 3 output relays 326.00 €
analogue I/O module 492.00 €
Communications Options
protocol switchable: IEC 60870-5-101/-103, Modbus, DNP3.0 and IRIG-B input, incl. 2nd
rear port (RS 485, IEC 60870-5-103)474.00 €
with IEC 61850 ethernet communications (Single Port) 495.00 €
Redundant Ethernet (2 ports 1300nm Multimode) with IRIG-B 765.00 €
Railway distance (catenary) protection, 16 2/3 Hz, basic complement 4 binary inputs and 8 output relays, 6 function keys, surface-mounting or flush-mounting, local control panel with text display,
21N, 50N, 51N, 50/27, 49, 27, 59, 50BF
basic device, pin-terminal connection 40TE On Request
basic device, pin-terminal connection 84TE On Request
basic device, ring-terminal connection 84TE On Request
Software Options
Default Software Version -
Customer specified and / or customised version Please contact Schneider Electric On Request
Product Specific Options
Higher switching thresholds on binary inputs 112.00 €
Detachable HMI (DHMI) 562.00 €
Hardware Options
module with 6 binary inputs and 8 output relays 415.00 €
module with 6 output relays 209.00 €
module with 4 high speed high break contacts 313.00 €
module with 6 binary inputs and 3 output relays 326.00 €
analogue I/O module 492.00 €
Communications Options
protocol switchable: IEC 60870-5-101/-103, Modbus, DNP3.0 and IRIG-B input, incl. 2nd
rear port (RS 485, IEC 60870-5-103)474.00 €
with IEC 61850 ethernet communications (Single Port) 495.00 €
Redundant Ethernet (2 ports 1300nm Multimode) with IRIG-B 765.00 €
InterMiCOM full-duplex protection signalling interface 481.00 €
P138
40TE
84TE
84TE
RAILWAY OVERCURRENT
RAILWAY DISTANCEP436
Schneider Electric SA - NRJED113434EN Page 31 of 65
SEPAM, MiCOM and VAMP Price Guide 2015 Section: 04 - MiCOM Px30 series
Railway distance (catenary) protection, 25/50/60 Hz, basic complement 4 binary inputs and 8 output relays, surface-mounting or flush-mounting, local control panel with text display,
21N, 50N, 51N, 50/27, 49, 27, 59, 50BF
Ring terminals on ac measurements inputs (heavy duty terminal block), pin-terminals on binary I/O
40TE On Request
basic device, pin-terminal connection 84TE On Request
basic device, ring-terminal connection 84TE On Request
Software Options
Default Software Version -
Customer specified and / or customised version Please contact Schneider Electric On Request
Product Specific OptionsAdditional DSP board required to support DELTA high impedance protection feature, and continous harmonic (2nd, 3rd, 5th) calculation.
338.00 €
Higher switching thresholds on binary inputs 112.00 €
Detachable HMI (DHMI) 562.00 €
Hardware Options
module with 6 binary inputs and 8 output relays 415.00 €
module with 6 output relays 209.00 €
module with 4 high speed high break contacts 313.00 €
module with 6 binary inputs and 3 output relays 326.00 €
analogue I/O module 492.00 €
Communications Options
protocol switchable: IEC 60870-5-101/-103, Modbus, DNP3.0 and IRIG-B input, incl. 2nd
rear port (RS 485, IEC 60870-5-103)474.00 €
with IEC 61850 ethernet communications (Single Port) 495.00 €
Redundant Ethernet (2 ports 1300nm Multimode) with IRIG-B 765.00 €
InterMiCOM full-duplex protection signalling interface 481.00 €
Transformer differential protection for railway systems, basic complement 4 binary inputs and 8 output relays, surface-mounting or flush-mounting, local control panel with text display,
87, 50, 51, 49, 27, 59, 50BF
basic device, pin-terminal connection On Request
basic device, ring-terminal connection On Request
Software Options
Default Software Version -
Customer specified and / or customised version Please contact Schneider Electric On Request
Product Specific Options
Higher switching thresholds on binary inputs 112.00 €
Hardware Options
module with 6 binary inputs and 8 output relays 415.00 €
module with 6 output relays 209.00 €
module with 4 high speed high break contacts 313.00 €
module with 6 binary inputs and 3 output relays 326.00 €
analogue I/O module 492.00 €
Communications Options
protocol switchable: IEC 60870-5-101/-103, Modbus, DNP3.0 and IRIG-B input, incl. 2nd
rear port (RS 485, IEC 60870-5-103)474.00 €
with IEC 61850 ethernet communications (Single Port) 495.00 €
Redundant Ethernet (2 ports 1300nm Multimode) with IRIG-B 765.00 €
P438
RAILWAY TRANSFORMERP638
84TE
84TE
Schneider Electric SA - NRJED113434EN Page 32 of 65
SEPAM, MiCOM and VAMP Price Guide 2015 Section: 05 - MiCOM Px40 series
MiCOM Px40 Series
TYPE & DESCRIPTION ANSI CASE PRICE
MiCOM Feeder Management Relay.
27, 32, 37N, 37P,46, 47, 49, 50BF, 50N, 50P, 51N, 51P, 51V, 59, 59N,
64, 67N, 67W, 81U, 81O, 81R, 81RF, 81RAV
8 opto inputs and 7 output relay 40TE 2,670.00 € 8 opto inputs and 8 output relay 40TE 2,699.00 € P141 PLATFORM - default supply L
Product Platforms L or J (Product options will vary depending on the Hardware platform and the Software Version selected)
Software Options
Default Software Version -
Customer specified and / or customised version Please contact Schneider Electric On Request
Communications Options
IRIG-B Input 183.00 €
Fibre Optic Convertor 210.00 €
IRIG-B Input and Fibre Optic Convertor 277.00 €
2nd rear comms without IRIG-B (* see note) 482.00 €
2nd rear comms with IRIG-B (* see note) 668.00 €
Ethernet Single Port (RJ45 and ST) and IEC 61850 Edition 1 only 495.00 €
Ethernet Single Port (RJ45 and ST) with Modulated or Un-modulated IRIG-B and IEC 61850 Edition 1 only 655.00 €
Redundant Ethernet (2 ST ports 1300nm Multimode) with Modulated or Un-modulated IRIG-B and IEC 61850 Edition 1 only 765.00 €
Ethernet, 1 RJ45 single port + Modulated/Un-modulated IRIG-B and IEC 61850 Edition 1 or 2, without Cyber Security (** see note) 495.00 € Redundant Ethernet PRP or HSR and Dual IP, 3 RJ45 ports + Modulated/Un-modulated IRIG-B and IEC 61850 Edition 1 or 2, without Cyber Security (** see note)
655.00 €
Redundant Ethernet PRP or HSR and Dual IP, 2 LC Ports + 1 RJ45 port + Modulated/Un-modulated IRIG-B and IEC 61850 Edition 1 or 2, without Cyber Security (** see note)
765.00 €
Ethernet, 1 RJ45 single port + Modulated/Un-modulated IRIG-B and IEC 61850 Edition 1 or 2, without Cyber Security (** see note) 640.00 € Redundant Ethernet PRP or HSR and Dual IP, 3 RJ45 ports + Modulated/Un-modulated IRIG-B and IEC 61850 Edition 1 or 2, without Cyber Security (** see note)
800.00 €
Redundant Ethernet PRP or HSR and Dual IP, 2 LC Ports + 1 RJ45 port + Modulated/Un-modulated IRIG-B and IEC 61850 Edition 1 or 2, without Cyber Security (** see note)
910.00 €
* Note: When the 2nd rear comms option is selected, this board also offers InterMiCOM relay - relay signalling ** Note: Please check avalibility and delivert time before any order in 2015
MiCOM Feeder Management with auto-reclose. 27, 32, 37N, 37P,46, 47, 49, 50BF, 50N, 50P, 51N, 51P, 51V, 59, 59N, 64, 67N, 67W, 79, 81U, 81O, 81R,
81RF, 81RAV8 opto inputs and 7 output contacts 40TE 3,541.00 €
P142 PLATFORM - default supply L
Product Platforms L or J (Product options will vary depending on the Hardware platform and the Software Version selected)
Software Options
Default Software Version -
Customer specified and / or customised version Please contact Schneider Electric On Request
Hardware Options
One additional card slot is available, to boost I/O available (each card fitted adds 8I, or 7O, or 4I+4O, or 4HSHB).
8 opto inputs 279.00 €
7 output contacts 183.00 €
4 opto inputs + 4 output contacts 288.00 €
4 HSHB contacts (High Break Contacts) 309.00 €
Communications Options
IRIG-B Input 183.00 €
Fibre Optic Convertor 210.00 €
IRIG-B Input and Fibre Optic Convertor 277.00 €
2nd rear comms without IRIG-B (see note) 482.00 €
2nd rear comms with IRIG-B (see note) 668.00 €
Ethernet Single Port (RJ45 and ST) and IEC 61850 Edition 1 only 495.00 €
Ethernet Single Port (RJ45 and ST) with Modulated or Un-modulated IRIG-B and IEC 61850 Edition 1 only 655.00 €
Redundant Ethernet (2 ST ports 1300nm Multimode) with Modulated or Un-modulated IRIG-B and IEC 61850 Edition 1 only 765.00 €
Ethernet, 1 RJ45 single port + Modulated/Un-modulated IRIG-B and IEC 61850 Edition 1 or 2, without Cyber Security (** see note) 495.00 €
Redundant Ethernet PRP or HSR and Dual IP, 3 RJ45 ports + Modulated/Un-modulated IRIG-B and IEC 61850 Edition 1 or 2, without Cyber Security (** see note)
655.00 €
Redundant Ethernet PRP or HSR and Dual IP, 2 LC Ports + 1 RJ45 port + Modulated/Un-modulated IRIG-B and IEC 61850 Edition 1 or 2, without Cyber Security (** see note)
765.00 €
Ethernet, 1 RJ45 single port + Modulated/Un-modulated IRIG-B and IEC 61850 Edition 1 or 2, without Cyber Security (** see note) 640.00 €
Redundant Ethernet PRP or HSR and Dual IP, 3 RJ45 ports + Modulated/Un-modulated IRIG-B and IEC 61850 Edition 1 or 2, without Cyber Security (** see note)
800.00 €
Redundant Ethernet PRP or HSR and Dual IP, 2 LC Ports + 1 RJ45 port + Modulated/Un-modulated IRIG-B and IEC 61850 Edition 1 or 2, without Cyber Security (** see note)
910.00 €
* Note: When the 2nd rear comms option is selected, this board also offers InterMiCOM relay - relay signalling ** Note: Please check avalibility and delivert time before any order in 2015
INTEGRATED FEEDER MANAGEMENTP141
P142
Schneider Electric SA - NRJED113434EN Page 33 of 65
SEPAM, MiCOM and VAMP Price Guide 2015 Section: 05 - MiCOM Px40 series
MiCOM Feeder Management with auto-reclose and check synchronising.
25, 27, 32, 37N, 37P,46, 47, 49, 50BF, 50N, 50P, 51N, 51P, 51V, 59, 59N, 64, 67N, 67W, 79, 81U, 81O,
81R, 81RF, 81RAV16 opto inputs and 14 output contacts 60TE 3,975.00 €
32 opto inputs and 32 output contacts 80TE 4,956.00 €
P143 PLATFORM - default supply L
Product Platforms L or J (Product options will vary depending on the Hardware platform and the Software Version selected)
Software Options
Default Software Version -
Customer specified and / or customised version Please contact Schneider Electric On Request
Hardware Options
Two additional card slots are available in 60TE Model, to boost I/O available (each card fitted adds 8I, or 8O, or 4HSHB).
8 opto inputs 279.00 €
8 output contacts 211.00 €
4 HSHB contacts (High Break Contacts) 309.00 €
Communications Options
IRIG-B Input (modulated) 183.00 €
Fibre Optic Convertor 210.00 €
IRIG-B Input (modulated) and Fibre Optic Convertor 277.00 €
2nd rear comms without IRIG-B (see note) 482.00 €
2nd rear comms with modulated IRIG-B (see note) 668.00 €
Ethernet Single Port (RJ45 and ST) and IEC 61850 Edition 1 only 495.00 €
Ethernet Single Port (RJ45 and ST) with Modulated or Un-modulated IRIG-B and IEC 61850 Edition 1 only 655.00 €
Redundant Ethernet (2 ST ports 1300nm Multimode) with Modulated or Un-modulated IRIG-B and IEC 61850 Edition 1 only 765.00 €
Ethernet, 1 RJ45 single port + Modulated/Un-modulated IRIG-B and IEC 61850 Edition 1 or 2, without Cyber Security (** see note) 495.00 €
Redundant Ethernet PRP or HSR and Dual IP, 3 RJ45 ports + Modulated/Un-modulated IRIG-B and IEC 61850 Edition 1 or 2, without Cyber Security (** see note)
655.00 €
Redundant Ethernet PRP or HSR and Dual IP, 2 LC Ports + 1 RJ45 port + Modulated/Un-modulated IRIG-B and IEC 61850 Edition 1 or 2, without Cyber Security (** see note)
765.00 €
Ethernet, 1 RJ45 single port + Modulated/Un-modulated IRIG-B and IEC 61850 Edition 1 or 2, without Cyber Security (** see note) 640.00 €
Redundant Ethernet PRP or HSR and Dual IP, 3 RJ45 ports + Modulated/Un-modulated IRIG-B and IEC 61850 Edition 1 or 2, without Cyber Security (** see note)
800.00 €
Redundant Ethernet PRP or HSR and Dual IP, 2 LC Ports + 1 RJ45 port + Modulated/Un-modulated IRIG-B and IEC 61850 Edition 1 or 2, without Cyber Security (** see note)
910.00 €
* Note: When the 2nd rear comms option is selected, this board also offers InterMiCOM relay - relay signalling ** Note: Please check avalibility and delivert time before any order in 2015
MiCOM Feeder Management with auto-reclose and check synchronising, plus multiple function keys. (See P891 where an additional direct trip/close function is required along with this relay).
25, 27, 32, 37N, 37P,46, 47, 49, 50BF, 50N, 50P, 51N, 51P, 51V, 59, 59N, 64, 67N, 67W, 79, 81U, 81O,
81R, 81RF, 81RAV12 opto inputs and 12 output relays base model (Model B, with ANSI Symbol Terminal Lablling) 60TE 4,342.00 €
16 opto inputs and 16 output relays model (Model A). 60TE 4,572.00 €
P145 PLATFORM - default supply M
Product Platform M or J (Product options will vary depending on the Hardware platform and the Software Version selected)
Software Options
Default Software Version -
Customer specified and / or customised version Please contact Schneider Electric On Request
Hardware Options
Two additional card slots are available in 60TE Model, to boost I/O available (each card fitted adds 8I, or 8O, or 4HSHB).
8 opto inputs 279.00 €
8 output contacts 211.00 €
4 HSHB contacts (High Break Contacts) 309.00 €
Communications Options
IRIG-B Input 182.00 €
Fibre Optic Convertor 210.00 €
IRIG-B Input and Fibre Optic Convertor 277.00 €
2nd rear comms without IRIG-B (see note) 482.00 €
2nd rear comms with IRIG-B (see note) 668.00 €
Ethernet Single Port (RJ45 and ST) and IEC 61850 Edition 1 only 495.00 €
Ethernet Single Port (RJ45 and ST) with Modulated or Un-modulated IRIG-B and IEC 61850 Edition 1 only 655.00 €
Redundant Ethernet (2 ST ports 1300nm Multimode) with Modulated or Un-modulated IRIG-B and IEC 61850 Edition 1 only 765.00 €
Ethernet, 1 RJ45 single port + Modulated/Un-modulated IRIG-B and IEC 61850 Edition 1 or 2, without Cyber Security (** see note) 495.00 €
Redundant Ethernet PRP or HSR and Dual IP, 3 RJ45 ports + Modulated/Un-modulated IRIG-B and IEC 61850 Edition 1 or 2, without Cyber Security (** see note)
655.00 €
Redundant Ethernet PRP or HSR and Dual IP, 2 LC Ports + 1 RJ45 port + Modulated/Un-modulated IRIG-B and IEC 61850 Edition 1 or 2, without Cyber Security (** see note)
765.00 €
Ethernet, 1 RJ45 single port + Modulated/Un-modulated IRIG-B and IEC 61850 Edition 1 or 2, without Cyber Security (** see note) 640.00 €
Redundant Ethernet PRP or HSR and Dual IP, 3 RJ45 ports + Modulated/Un-modulated IRIG-B and IEC 61850 Edition 1 or 2, without Cyber Security (** see note)
800.00 €
Redundant Ethernet PRP or HSR and Dual IP, 2 LC Ports + 1 RJ45 port + Modulated/Un-modulated IRIG-B and IEC 61850 Edition 1 or 2, without Cyber Security (** see note)
910.00 €
* Note: When the 2nd rear comms option is selected, this board also offers InterMiCOM relay - relay signalling ** Note: Please check avalibility and delivert time before any order in 2015
P143
P145
Schneider Electric SA - NRJED113434EN Page 34 of 65
SEPAM, MiCOM and VAMP Price Guide 2015 Section: 05 - MiCOM Px40 series
MiCOM Universal Motor Management for synchronous and induction motors 14, 26, 27, 27LV, 32N, 37, 38, 46,
47, 48, 49, 49T, 50, 50BF, 51, 50N, 51N, 50S, 51LR, 55, 59, 59N, 64N,
66, 67N, 81U, 86
8 opto inputs and 7output contacts 40TE 2,609.00 €
P241 PLATFORM - default supply J
Product Plaforms J (Product options will vary depending on the Hardware platform and the Software Version selected)
Software Options
Default Software Version -
Customer specified and / or customised version Please contact Schneider Electric On Request
Product Specific Options
CLIO 493.00 €
RTD 502.00 €
Hardware Options
12 opto inputs, 11 contacts (addition 4 inputs + 4 outputs) 288.00 €
Communication Options
IRIG-B Input (modulated) 183.00 €
Fibre Optic Convertor 210.00 €
IRIG-B Input (modulated) and Fibre Optic Convertor 277.00 €
2nd rear comms without IRIG-B 482.00 €
2nd rear comms with modulated IRIG-B 668.00 €
Ethernet Single Port (RJ45 and ST) and IEC 61850 Edition 1 only 495.00 €
Ethernet Single Port (RJ45 and ST) with Modulated or Un-modulated IRIG-B and IEC 61850 Edition 1 only 655.00 €
Redundant Ethernet (2 ST ports 1300nm Multimode) with Modulated or Un-modulated IRIG-B and IEC 61850 Edition 1 only 765.00 €
Ethernet, 1 RJ45 single port + Modulated/Un-modulated IRIG-B and IEC 61850 Edition 1 or 2, without Cyber Security (** see note) 495.00 €
Redundant Ethernet PRP or HSR and Dual IP, 3 RJ45 ports + Modulated/Un-modulated IRIG-B and IEC 61850 Edition 1 or 2, without Cyber Security (** see note)
655.00 €
Redundant Ethernet PRP or HSR and Dual IP, 2 LC Ports + 1 RJ45 port + Modulated/Un-modulated IRIG-B and IEC 61850 Edition 1 or 2, without Cyber Security (** see note)
765.00 €
Ethernet, 1 RJ45 single port + Modulated/Un-modulated IRIG-B and IEC 61850 Edition 1 or 2, without Cyber Security (** see note) 640.00 €
Redundant Ethernet PRP or HSR and Dual IP, 3 RJ45 ports + Modulated/Un-modulated IRIG-B and IEC 61850 Edition 1 or 2, without Cyber Security (** see note)
800.00 €
Redundant Ethernet PRP or HSR and Dual IP, 2 LC Ports + 1 RJ45 port + Modulated/Un-modulated IRIG-B and IEC 61850 Edition 1 or 2, without Cyber Security (** see note)
910.00 €
** Note: Please check avalibility and delivert time before any order in 2015
MiCOM Universal Motor Management for synchronous and induction motors14, 26, 27, 27LV, 32N, 37, 38, 46,
47, 48, 49, 49T, 50, 50BF, 51, 50N, 51N, 50S, 51LR, 55, 59, 59N, 64N,
66, 67N, 81U, 86
16 opto inputs and 16 output contacts 80TE 3,115.00 €
P242 PLATFORM - default supply K
Product Plaforms K (Product options will vary depending on the Hardware platform and the Software Version selected)
Software Options
Default Software Version -
Customer specified and / or customised version Please contact Schneider Electric On Request
Product Specific Options
CLIO 493.00 €
RTD 502.00 €
CLIO and RTD 996.00 €
Communication Options
IRIG-B Input (modulated) 183.00 €
Fibre Optic Convertor 210.00 €
IRIG-B Input (modulated) and Fibre Optic Convertor 277.00 €
2nd rear comms without IRIG-B 482.00 €
2nd rear comms with modulated IRIG-B 668.00 €
Ethernet Single Port (RJ45 and ST) and IEC 61850 Edition 1 only 495.00 €
Ethernet Single Port (RJ45 and ST) with Modulated or Un-modulated IRIG-B and IEC 61850 Edition 1 only 655.00 €
Redundant Ethernet (2 ST ports 1300nm Multimode) with Modulated or Un-modulated IRIG-B and IEC 61850 Edition 1 only 765.00 €
Ethernet, 1 RJ45 single port + Modulated/Un-modulated IRIG-B and IEC 61850 Edition 1 or 2, without Cyber Security (** see note) 495.00 €
Redundant Ethernet PRP or HSR and Dual IP, 3 RJ45 ports + Modulated/Un-modulated IRIG-B and IEC 61850 Edition 1 or 2, without Cyber Security (** see note)
655.00 €
Redundant Ethernet PRP or HSR and Dual IP, 2 LC Ports + 1 RJ45 port + Modulated/Un-modulated IRIG-B and IEC 61850 Edition 1 or 2, without Cyber Security (** see note)
765.00 €
Ethernet, 1 RJ45 single port + Modulated/Un-modulated IRIG-B and IEC 61850 Edition 1 or 2, without Cyber Security (** see note) 640.00 €
Redundant Ethernet PRP or HSR and Dual IP, 3 RJ45 ports + Modulated/Un-modulated IRIG-B and IEC 61850 Edition 1 or 2, without Cyber Security (** see note)
800.00 €
Redundant Ethernet PRP or HSR and Dual IP, 2 LC Ports + 1 RJ45 port + Modulated/Un-modulated IRIG-B and IEC 61850 Edition 1 or 2, without Cyber Security (** see note)
910.00 €
** Note: Please check avalibility and delivert time before any order in 2015
INTEGRATED MOTOR MANAGEMENTP241
P242
Schneider Electric SA - NRJED113434EN Page 35 of 65
SEPAM, MiCOM and VAMP Price Guide 2015 Section: 05 - MiCOM Px40 series
MiCOM Universal Motor Management with motor différential protection for synchronous and induction motors14, 26, 27, 27LV, 32N, 37, 38, 46,
47, 48, 49, 49T, 50, 50BF, 51, 50N, 51N, 50S, 51LR, 55, 59, 59N, 64N,
66, 67N, 81U, 87M, 86
16 opto inputs and 16 output contacts 80TE 4,699.00 €
P243 PLATFORM - default supply K
Product Plaforms K (Product options will vary depending on the Hardware platform and the Software Version selected)
Software Options
Default Software Version -
Customer specified and / or customised version Please contact Schneider Electric On Request
Product Specific Options
CLIO 493.00 €
RTD 502.00 €
CLIO and RTD 996.00 €
Communication Options
IRIG-B Input (modulated) 183.00 €
Fibre Optic Convertor 210.00 €
IRIG-B Input (modulated) and Fibre Optic Convertor 277.00 €
2nd rear comms without IRIG-B 482.00 €
2nd rear comms with modulated IRIG-B 668.00 €
Ethernet Single Port (RJ45 and ST) and IEC 61850 Edition 1 only 495.00 €
Ethernet Single Port (RJ45 and ST) with Modulated or Un-modulated IRIG-B and IEC 61850 Edition 1 only 655.00 €
Redundant Ethernet (2 ST ports 1300nm Multimode) with Modulated or Un-modulated IRIG-B and IEC 61850 Edition 1 only 765.00 €
Ethernet, 1 RJ45 single port + Modulated/Un-modulated IRIG-B and IEC 61850 Edition 1 or 2, without Cyber Security (** see note) 495.00 €
Redundant Ethernet PRP or HSR and Dual IP, 3 RJ45 ports + Modulated/Un-modulated IRIG-B and IEC 61850 Edition 1 or 2, without Cyber Security (** see note)
655.00 €
Redundant Ethernet PRP or HSR and Dual IP, 2 LC Ports + 1 RJ45 port + Modulated/Un-modulated IRIG-B and IEC 61850 Edition 1 or 2, without Cyber Security (** see note)
765.00 €
Ethernet, 1 RJ45 single port + Modulated/Un-modulated IRIG-B and IEC 61850 Edition 1 or 2, without Cyber Security (** see note) 640.00 €
Redundant Ethernet PRP or HSR and Dual IP, 3 RJ45 ports + Modulated/Un-modulated IRIG-B and IEC 61850 Edition 1 or 2, without Cyber Security (** see note)
800.00 €
Redundant Ethernet PRP or HSR and Dual IP, 2 LC Ports + 1 RJ45 port + Modulated/Un-modulated IRIG-B and IEC 61850 Edition 1 or 2, without Cyber Security (** see note)
910.00 €
** Note: Please check avalibility and delivert time before any order in 2015
MiCOM Interconnection Protection, with CT and VT supervision, voltage vector shift and rate of change of frequency monitoring. 27, 32/32R, 50/50N/50P/50BF, 51/51N/51P, 52, 59/59N, 64,
67/67N, 81O/81U/81R, 49, 46, 47
Basic device for 40TE with 8 opto inputs and 7 output contacts 40TE 4,002.00 €
Basic device for 60TE with 16 opto inputs and 16 output contacts 60TE 4,590.00 €
P341 PLATFORM - default supply J
Product Plaforms J (Product options will vary depending on the Hardware platform and the Software Version selected)
Software Options
Default Software Version 3X (except 7X) -
Dynamic Line Thermal Protection Software - version 7X 49DL 1,051.00 €
Customer specified and / or customised version On Request
Hardware Options
Note: For 40TE case, 1 additional card slot is available for I/O extension (8DI, 7DO, 4DI+4DO or 4HB board) or adding the CLIO board
8DI board 40TE 279.00 €
7DO board 40TE 183.00 €
4DI +4DO board 40TE 288.00 €
4 HSHB board 40TE 309.00 €
CLIO 40TE 493.00 €
Note: For 60TE case, 1 additional card slot is available for I/O extension (8DI, 8DO, 4HB board) or adding the CLIO board
8DI board 60TE 279.00 € 8DO board 60TE 211.00 € 4 HSHB board 60TE 309.00 € CLIO + 4HSHB (delta price for 1 4HSHB board1 instead of 1 8DO board) 60TE 663.00 € Communication Options
IRIG-B Input (modulated) 183.00 €
Fibre Optic Convertor 210.00 €
IRIG-B Input (modulated) and Fibre Optic Convertor 277.00 €
2nd rear comms without IRIG-B 482.00 €
2nd rear comms with modulated IRIG-B 668.00 €
Ethernet Single Port (RJ45 and ST) and IEC 61850 Edition 1 only 495.00 €
Ethernet Single Port (RJ45 and ST) with Modulated or Un-modulated IRIG-B and IEC 61850 Edition 1 only 655.00 €
Redundant Ethernet (2 ST ports 1300nm Multimode) with Modulated or Un-modulated IRIG-B and IEC 61850 Edition 1 only 765.00 €
Ethernet, 1 RJ45 single port + Modulated/Un-modulated IRIG-B and IEC 61850 Edition 1 or 2, without Cyber Security (** see note) 495.00 € Redundant Ethernet PRP or HSR and Dual IP, 3 RJ45 ports + Modulated/Un-modulated IRIG-B and IEC 61850 Edition 1 or 2, without Cyber Security (** see note)
655.00 €
Redundant Ethernet PRP or HSR and Dual IP, 2 LC Ports + 1 RJ45 port + Modulated/Un-modulated IRIG-B and IEC 61850 Edition 1 or 2, without Cyber Security (** see note)
765.00 €
Ethernet, 1 RJ45 single port + Modulated/Un-modulated IRIG-B and IEC 61850 Edition 1 or 2, without Cyber Security (** see note) 640.00 € Redundant Ethernet PRP or HSR and Dual IP, 3 RJ45 ports + Modulated/Un-modulated IRIG-B and IEC 61850 Edition 1 or 2, without Cyber Security (** see note)
800.00 €
Redundant Ethernet PRP or HSR and Dual IP, 2 LC Ports + 1 RJ45 port + Modulated/Un-modulated IRIG-B and IEC 61850 Edition 1 or 2, without Cyber Security (** see note)
910.00 €
** Note: Please check avalibility and delivert time before any order in 2015
Please contact Schneider Electric
P243
INTERCONNECTION / LOSS OF MAINSP341
Schneider Electric SA - NRJED113434EN Page 36 of 65
SEPAM, MiCOM and VAMP Price Guide 2015 Section: 05 - MiCOM Px40 series
MiCOM Generator Protection , with CT and VT supervision and optional temperature monitoring. 21, 24, 27, 32L/32R/32O,50/50N, 50BF, 51/51N/51V, 40, 46, 47, 59,
64, 81O/81U, 81AB, 49
Basic device for 40TE with 8 opto inputs and 7 output contacts 40TE 5,737.00 €
Basic device for 60TE with 16 opto inputs and 16 output contacts 60TE 6,393.00 €
P342 PLATFORM - default supply J
Product Plaforms J (Product options will vary depending on the Hardware platform and the Software Version selected)
Software Options
Default Software Version -
Customer specified and / or customised version Please contact Schneider Electric On Request
Hardware Options
Note: For 40TE case, 1 additional card slot is available for I/O extension (8DI, 7DO, 4DI+4DO or 4HB board) or CLIO board or RTD board
8DI board 40TE 279.00 €
7DO board 40TE 183.00 €
4DI +4DO board 40TE 288.00 €
4 HSHB board 40TE 309.00 €
CLIO 40TE 493.00 €
RTD 40TE 502.00 €
Note: For 60TE case, 2 additional card slots are available for I/O extension (8DI, 8DO, 4HB board) or RTD or CLIO board
8DI board 60TE 279.00 € 8DO board 60TE 211.00 € CLIO 60TE 493.00 €
RTD 60TE 502.00 €
CLIO and RTD 60TE 996.00 €
8DI board and RTD board 60TE 782.00 €
8DO board and RTD board 60TE 714.00 € 4 HSHB board 60TE 309.00 € RTD + 4HSHB (delta price for 1 4HSHB board instead of 1 8DO board) 60TE 671.00 € CLIO + 4HSHB (delta price for 1 4HSHB board instead of 1 8DO board) 60TE 663.00 € RTD + CLIO + 4HSHB (delta price for 1 4HSHB board instead of 1 8DO board) 60TE 1,165.00 € Communication Options
IRIG-B Input (modulated) 183.00 €
Fibre Optic Convertor 210.00 €
IRIG-B Input (modulated) and Fibre Optic Convertor 277.00 €
2nd rear comms without IRIG-B 482.00 €
2nd rear comms with modulated IRIG-B 668.00 €
Ethernet Single Port (RJ45 and ST) and IEC 61850 Edition 1 only 495.00 €
Ethernet Single Port (RJ45 and ST) with Modulated or Un-modulated IRIG-B and IEC 61850 Edition 1 only 655.00 €
Redundant Ethernet (2 ST ports 1300nm Multimode) with Modulated or Un-modulated IRIG-B and IEC 61850 Edition 1 only 765.00 €
Ethernet, 1 RJ45 single port + Modulated/Un-modulated IRIG-B and IEC 61850 Edition 1 or 2, without Cyber Security (** see note) 495.00 €
Redundant Ethernet PRP or HSR and Dual IP, 3 RJ45 ports + Modulated/Un-modulated IRIG-B and IEC 61850 Edition 1 or 2, without Cyber Security (** see note)
655.00 €
Redundant Ethernet PRP or HSR and Dual IP, 2 LC Ports + 1 RJ45 port + Modulated/Un-modulated IRIG-B and IEC 61850 Edition 1 or 2, without Cyber Security (** see note)
765.00 €
Ethernet, 1 RJ45 single port + Modulated/Un-modulated IRIG-B and IEC 61850 Edition 1 or 2, without Cyber Security (** see note) 640.00 €
Redundant Ethernet PRP or HSR and Dual IP, 3 RJ45 ports + Modulated/Un-modulated IRIG-B and IEC 61850 Edition 1 or 2, without Cyber Security (** see note)
800.00 €
Redundant Ethernet PRP or HSR and Dual IP, 2 LC Ports + 1 RJ45 port + Modulated/Un-modulated IRIG-B and IEC 61850 Edition 1 or 2, without Cyber Security (** see note)
910.00 €
** Note: Please check avalibility and delivert time before any order in 2015
INTEGRATED GENERATOR MANAGEMENTP342
Schneider Electric SA - NRJED113434EN Page 37 of 65
SEPAM, MiCOM and VAMP Price Guide 2015 Section: 05 - MiCOM Px40 series
MiCOM Generator Protection with CT and VT supervision, optional temperature monitoring and with differential, 100% stator earth fault protection and pole slipping protection.
21, 24, 27/27TN, 32L/32R/32O, 50/50N, 50BF, 51/51N/51V, 40, 46,
47, 59/59N/59TN, 64, 81O/81U/81AB, 87G, 78, 49
16 opto inputs and 14 output contacts 60TE 8,765.00 €
24 opto inputs and 24 output contacts 80TE 9,405.00 €
P343 PLATFORM - default supply K
Product Plaforms K or J (Product options will vary depending on the Hardware platform and the Software Version selected)
Software Options
Default Software Version -
Customer specified and / or customised version Please contact Schneider Electric On Request
Hardware Options
Note: For 60TE case, 1 additional card slot is available for I/O extension (8DI, 8DO, 4HB board) or CLIO board or RTD board
8DI board 279.00 €
8DO board 211.00 €
4 HSHB board 309.00 €
4 HSHB (delta price for 1 4HSHB board instead of 1 8DO board) 170.00 €
CLIO 493.00 €
RTD 502.00 €
CLIO board and 4HSHB (delta price for 1 4HSHB board instead of 1 8DO board) 663.00 €
Note: For 80TE case, 2 additional card slots are available for I/O extension (8DI, 8DO, 4HB board) or RTD or CLIO board
8DI board 279.00 € 8DO board 211.00 € CLIO 493.00 €
RTD 502.00 €
CLIO and RTD 996.00 €
8DI board and RTD board 782.00 €
8DO board and RTD board 714.00 € 8DI + RTD + CLIO replace 8DO board 1,064.00 € 8DO + RTD + CLIO replace 8DI board 928.00 € 8 HSHB (delta price for 2 4HSHB boards instead of 1 8D1 board and 1 8DO board) 199.00 € RTD + 8 HSHB (delta price for 2 4HSHB boards instead of 1 8D1 board and 1 8DO board) 700.00 € CLIO + 8 HSHB (delta price for 2 4HSHB boards instead of 1 8D1 board and 1 8DO board) 692.00 € RTD + CLIO + 8 HSHB (delta price for 2 4HSHB boards instead of 1 8D1 board and 1 8DO board) 1,195.00 € Communication Options
IRIG-B Input (modulated) 183.00 €
Fibre Optic Convertor 210.00 €
IRIG-B Input (modulated) and Fibre Optic Convertor 277.00 €
2nd rear comms without IRIG-B 482.00 €
2nd rear comms with modulated IRIG-B 668.00 €
Ethernet Single Port (RJ45 and ST) and IEC 61850 Edition 1 only 495.00 €
Ethernet Single Port (RJ45 and ST) with Modulated or Un-modulated IRIG-B and IEC 61850 Edition 1 only 655.00 €
Redundant Ethernet (2 ST ports 1300nm Multimode) with Modulated or Un-modulated IRIG-B and IEC 61850 Edition 1 only 765.00 €
Ethernet, 1 RJ45 single port + Modulated/Un-modulated IRIG-B and IEC 61850 Edition 1 or 2, without Cyber Security (** see note) 495.00 €
Redundant Ethernet PRP or HSR and Dual IP, 3 RJ45 ports + Modulated/Un-modulated IRIG-B and IEC 61850 Edition 1 or 2, without Cyber Security (** see note)
655.00 €
Redundant Ethernet PRP or HSR and Dual IP, 2 LC Ports + 1 RJ45 port + Modulated/Un-modulated IRIG-B and IEC 61850 Edition 1 or 2, without Cyber Security (** see note)
765.00 €
Ethernet, 1 RJ45 single port + Modulated/Un-modulated IRIG-B and IEC 61850 Edition 1 or 2, without Cyber Security (** see note) 640.00 €
Redundant Ethernet PRP or HSR and Dual IP, 3 RJ45 ports + Modulated/Un-modulated IRIG-B and IEC 61850 Edition 1 or 2, without Cyber Security (** see note)
800.00 €
Redundant Ethernet PRP or HSR and Dual IP, 2 LC Ports + 1 RJ45 port + Modulated/Un-modulated IRIG-B and IEC 61850 Edition 1 or 2, without Cyber Security (** see note)
910.00 €
** Note: Please check avalibility and delivert time before any order in 2015
P343
60TE
80TE
Schneider Electric SA - NRJED113434EN Page 38 of 65
SEPAM, MiCOM and VAMP Price Guide 2015 Section: 05 - MiCOM Px40 series
As per P343, with an additional VT input for a second neutral displacement function (59N),
21, 24, 27/27TN, 32L/32R/32O, 50/50N, 50BF, 51/51N/51V, 40, 46,
47, 59/59N/59TN, 64, 81O/81U/81AB, 87G, 78, 49
24 opto inputs and 24 output contacts 80TE 9,874.00 €
P344 PLATFORM - default supply K
Product Plaforms K or J (Product options will vary depending on the Hardware platform and the Software Version selected)
Software Options
Default Software Version -
Customer specified and / or customised version Please contact Schneider Electric On Request
Hardware Options
Note: 2 additional card slots are available for I/O extension (8DI, 8DOor 4HB board) or RTD or CLIO board
8DI board 279.00 €
8DO board 211.00 €
CLIO 493.00 €
RTD 502.00 €
RTD + CLIO 996.00 €
8DI board and RTD board 782.00 €
8DO board and RTD board 714.00 €
8DI + RTD + CLIO replace 8DO board 1,064.00 €
8DO + RTD + CLIO replace 8DI board 928.00 €
4 HSHB (delta price for 1 4HSHB board instead of 1 8DO board) 170.00 € RTD + 4HSHB (delta price for 1 4HSHB board instead of 1 8DO board) 671.00 € CLIO + 4HSHB (delta price for 1 4HSHB board instead of 1 8DO board) 663.00 € RTD + CLIO + 4HSHB (delta price for 1 4HSHB board instead of 1 8DO board) 1,165.00 € 8 HSHB contacts (delta price for 2 4HSHB boards instead of 1 8D1 board and 1 8DO board) 199.00 € RTD + 8 HSHB (delta price for 2 4HSHB boards instead of 1 8D1 board and 1 8DO board) 700.00 € CLIO + 8 HSHB (delta price for 2 4HSHB boards instead of 1 8D1 board and 1 8DO board) 692.00 € RTD + CLIO +8 HSHB (delta price for 2 4HSHB boards instead of 1 8D1 board and 1 8DO board) 1,195.00 € Communication Options
IRIG-B Input (modulated) 183.00 €
Fibre Optic Convertor 210.00 €
IRIG-B Input (modulated) and Fibre Optic Convertor 277.00 €
2nd rear comms without IRIG-B 482.00 €
2nd rear comms with modulated IRIG-B 668.00 €
Ethernet Single Port (RJ45 and ST) and IEC 61850 Edition 1 only 495.00 €
Ethernet Single Port (RJ45 and ST) with Modulated or Un-modulated IRIG-B and IEC 61850 Edition 1 only 655.00 €
Redundant Ethernet (2 ST ports 1300nm Multimode) with Modulated or Un-modulated IRIG-B and IEC 61850 Edition 1 only 765.00 €
Ethernet, 1 RJ45 single port + Modulated/Un-modulated IRIG-B and IEC 61850 Edition 1 or 2, without Cyber Security (** see note) 495.00 €
Redundant Ethernet PRP or HSR and Dual IP, 3 RJ45 ports + Modulated/Un-modulated IRIG-B and IEC 61850 Edition 1 or 2, without Cyber Security (** see note)
655.00 €
Redundant Ethernet PRP or HSR and Dual IP, 2 LC Ports + 1 RJ45 port + Modulated/Un-modulated IRIG-B and IEC 61850 Edition 1 or 2, without Cyber Security (** see note)
765.00 €
Ethernet, 1 RJ45 single port + Modulated/Un-modulated IRIG-B and IEC 61850 Edition 1 or 2, without Cyber Security (** see note) 640.00 € Redundant Ethernet PRP or HSR and Dual IP, 3 RJ45 ports + Modulated/Un-modulated IRIG-B and IEC 61850 Edition 1 or 2, without Cyber Security (** see note)
800.00 €
Redundant Ethernet PRP or HSR and Dual IP, 2 LC Ports + 1 RJ45 port + Modulated/Un-modulated IRIG-B and IEC 61850 Edition 1 or 2, without Cyber Security (** see note)
910.00 €
** Note: Please check avalibility and delivert time before any order in 2015
P344
Schneider Electric SA - NRJED113434EN Page 39 of 65
SEPAM, MiCOM and VAMP Price Guide 2015 Section: 05 - MiCOM Px40 series
As per P344, plus 100% stator earth fault by injection achieved using special accessories below, 24 opto inputs and 24 output relays.
21, 24, 27/27TN, 32L/32R/32O, 50/50N, 50BF, 51/51N/51V, 40, 46,
47, 59/59N/59TN, 64, 81O/81U/81AB, 87G, 78, 49
Basic device with 24 opto inputs and 24 output contacts 80TE 11,153.00 €
P345 PLATFORM - default supply K
Product Plaforms K (Product options will vary depending on the Hardware platform and the Software Version selected)
Software Options
Default Software Version -
Customer specified and / or customised version Please contact Schneider Electric On Request
Hardware Options
Note: 2 additional card slots are available for I/O extension (8DI, 8DOor 4HB board) or RTD or CLIO board
8DI board 279.00 €
8DO board 211.00 €
CLIO 493.00 €
RTD 502.00 €
RTD + CLIO 996.00 €
8DI board and RTD board 782.00 €
8DO board and RTD board 714.00 €
8DI + RTD + CLIO replace 8DO board 1,064.00 €
8DO + RTD + CLIO replace 8DI board 928.00 €
4 HSHB (delta price for 1 4HSHB board instead of 1 8DO board) 170.00 € RTD + 4HSHB (delta price for 1 4HSHB board instead of 1 8DO board) 671.00 € CLIO + 4HSHB (delta price for 1 4HSHB board instead of 1 8DO board) 663.00 € RTD + CLIO + 4HSHB (delta price for 1 4HSHB board instead of 1 8DO board) 1,165.00 € 8 HSHB contacts (delta price for 2 4HSHB boards instead of 1 8D1 board and 1 8DO board) 199.00 € RTD + 8 HSHB (delta price for 2 4HSHB boards instead of 1 8D1 board and 1 8DO board) 700.00 € CLIO + 8 HSHB (delta price for 2 4HSHB boards instead of 1 8D1 board and 1 8DO board) 692.00 € RTD + CLIO +8 HSHB (delta price for 2 4HSHB boards instead of 1 8D1 board and 1 8DO board) 1,195.00 € Communication Options
IRIG-B Input (modulated) 183.00 €
Fibre Optic Convertor 210.00 €
IRIG-B Input (modulated) and Fibre Optic Convertor 277.00 €
2nd rear comms without IRIG-B 482.00 €
2nd rear comms with modulated IRIG-B 668.00 €
Ethernet Single Port (RJ45 and ST) and IEC 61850 Edition 1 only 495.00 €
Ethernet Single Port (RJ45 and ST) with Modulated or Un-modulated IRIG-B and IEC 61850 Edition 1 only 655.00 €
Redundant Ethernet (2 ST ports 1300nm Multimode) with Modulated or Un-modulated IRIG-B and IEC 61850 Edition 1 only 765.00 €
Ethernet, 1 RJ45 single port + Modulated/Un-modulated IRIG-B and IEC 61850 Edition 1 or 2, without Cyber Security (** see note) 495.00 € Redundant Ethernet PRP or HSR and Dual IP, 3 RJ45 ports + Modulated/Un-modulated IRIG-B and IEC 61850 Edition 1 or 2, without Cyber Security (** see note)
655.00 €
Redundant Ethernet PRP or HSR and Dual IP, 2 LC Ports + 1 RJ45 port + Modulated/Un-modulated IRIG-B and IEC 61850 Edition 1 or 2, without Cyber Security (** see note)
765.00 €
Ethernet, 1 RJ45 single port + Modulated/Un-modulated IRIG-B and IEC 61850 Edition 1 or 2, without Cyber Security (** see note) 640.00 €
Redundant Ethernet PRP or HSR and Dual IP, 3 RJ45 ports + Modulated/Un-modulated IRIG-B and IEC 61850 Edition 1 or 2, without Cyber Security (** see note)
800.00 €
Redundant Ethernet PRP or HSR and Dual IP, 2 LC Ports + 1 RJ45 port + Modulated/Un-modulated IRIG-B and IEC 61850 Edition 1 or 2, without Cyber Security (** see note)
910.00 €
** Note: Please check avalibility and delivert time before any order in 2015
To achieve 100% stator earth fault by injection principle:20Hz Bandpass filter On Request20Hz Generator On Request
Tripping CT 400/5A On Request
Accessory for use with P342, P343, P344, and P345 for rotor earth fault protection. (Select CLIO card option in the main relay to allow connection in the scheme).
64R 1,895.00 €
MiCOM Distance Protection; with 3 phase tripping and 3 phase auto-reclose. 21G, 21P, 25, 27, 46, 46BC, 50,
50BF, 51, 51N, 51FF, 59, 67, 67N, 78, 79, 85
8 inputs and 14 outputs without check synchronising 40TE 6,337.00 €
8 inputs and 14 outputs with check synchronising 40TE 6,800.00 €
P441 PLATFORM - default supply J
Product Platforms J (Product options will vary depending on the Hardware platform and the Software Version selected)
Software Options
Default Software Version -
Customer specified and / or customised version Please contact Schneider Electric On Request
P441
P345
P345 ACCESSORIES
ROTOR EARTH FAULTP391
LINE / CABLE DISTANCE
Schneider Electric SA - NRJED113434EN Page 40 of 65
SEPAM, MiCOM and VAMP Price Guide 2015 Section: 05 - MiCOM Px40 series
MiCOM Distance Protection; with 1/3 phase tripping, 1/3 phase auto-reclose & check synchronising 21G, 21P, 25, 27, 46, 46BC, 50,
50BF, 51, 51N, 51FF, 59, 67, 67N, 78, 79, 85
16 inputs and 21 outputs 60TE 8,553.00 €
P442 PLATFORM - default supply K
Product Plaforms K or J (Product options will vary depending on the Hardware platform and the Software Version selected)
Software Options
Default Software Version -
Customer specified and / or customised version Please contact Schneider Electric On Request
Hardware Options 4 HSHB (delta price for 1 4HSHB board instead of 1 7DO board) 170.00 € Communications Options (P442)
IRIG-B Input (modulated only) 183.00 €
Fibre Optic Convertor 210.00 €
IRIG-B Input (modulated) and Fibre Optic Convertor 276.00 €
2nd rear comms without IRIG-B (* see note) 482.00 €
2nd rear comms with modulated IRIG-B (* see note) 668.00 €
Ethernet Single Port (RJ45 and ST) and IEC 61850 Edition 1 only 495.00 €
Ethernet Single Port (RJ45 and ST) with Modulated or Un-modulated IRIG-B and IEC 61850 Edition 1 only 655.00 €
Redundant Ethernet (2 ST ports 1300nm Multimode) with Modulated or Un-modulated IRIG-B and IEC 61850 Edition 1 only 765.00 €
Ethernet, 1 RJ45 single port + Modulated/Un-modulated IRIG-B and IEC 61850 Edition 1 or 2, without Cyber Security (** see note) 495.00 € Redundant Ethernet PRP or HSR and Dual IP, 3 RJ45 ports + Modulated/Un-modulated IRIG-B and IEC 61850 Edition 1 or 2, without Cyber Security (** see note)
655.00 €
Redundant Ethernet PRP or HSR and Dual IP, 2 LC Ports + 1 RJ45 port + Modulated/Un-modulated IRIG-B and IEC 61850 Edition 1 or 2, without Cyber Security (** see note)
765.00 €
Ethernet, 1 RJ45 single port + Modulated/Un-modulated IRIG-B and IEC 61850 Edition 1 or 2, without Cyber Security (** see note) 640.00 € Redundant Ethernet PRP or HSR and Dual IP, 3 RJ45 ports + Modulated/Un-modulated IRIG-B and IEC 61850 Edition 1 or 2, without Cyber Security (** see note)
800.00 €
Redundant Ethernet PRP or HSR and Dual IP, 2 LC Ports + 1 RJ45 port + Modulated/Un-modulated IRIG-B and IEC 61850 Edition 1 or 2, without Cyber Security (** see note)
910.00 €
* Note: When the 2nd rear comms option is selected, this board also offers InterMiCOM relay - relay signalling ** Note: Please check avalibility and delivert time before any order in 2015
MiCOMho Distance Protection; with 1/3 phase tripping and 1/3 phase auto-reclose. Offers mho, quadrilateral, and directional comparison elements. Fast subcycle tripping for all applications including EHV.
21G, 21P, 25, 27, 46, 46BC, 49, 50, 50BF, 51, 51N, 51FF, 59, 59N, 67,
67N, 68, 78, 79, 85, 87DC, 81U/O/R
Relay with 16 opto inputs and 24 contacts, ring terminals 80TE 9,450.00 €
Relay with 24 opto inputs and 32 contacts, ring terminals 80TE 9,933.00 €
Relay with 32 opto inputs and 32 contacts, ring terminals 80TE 10,209.00 €
P443 PLATFORM - default supply M
Product Plaforms M, K or J (Product options will vary depending on the Hardware platform and the Software Version selected)
Software Options
Default Software Version -
Customer specified and / or customised version Please contact Schneider Electric On Request
Hardware Options (NOT APPLICABLE 32 Opto Inputs / 3 2 Output contacts)4 HSHB (delta price for 1 4HSHB board instead of 1 8DO board) 170.00 € 8 HSHB (delta price for 2 4HSHB boards instead of 2 8DO boards) 338.00 € InterMiCOM64 850nm teleprotection, 2 channel 483.00 €
InterMiCOM64 with single 1300nm channel only 1,983.00 €
InterMiCOM64 with one 850nm and one 1300nm channel for 3-ended or dual redundant schemes. 2,463.00 €
InterMiCOM64 with dual 1300nm channel for 3-ended or dual redundant schemes. 3,486.00 € Note: InterMiCOM64 850nm can interface directly to IEEE C37.94 multiplexers, or to G.703 (P591), V.35 (P592), or X.21 (P593). Details of P59x interfaces are shown in the current differential section.
Communications Options
IRIG-B Input (modulated) 183.00 €
Fibre Optic Convertor 210.00 €
IRIG-B Input (modulated) and Fibre Optic Convertor 276.00 €
2nd rear comms without IRIG-B (* see note) 482.00 €
2nd rear comms with modulated IRIG-B (* see note) 668.00 €
Ethernet Single Port (RJ45 and ST) and IEC 61850 Edition 1 only 495.00 €
Ethernet Single Port (RJ45 and ST) with Modulated or Un-modulated IRIG-B and IEC 61850 Edition 1 only 655.00 €
Redundant Ethernet (2 ST ports 1300nm Multimode) with Modulated or Un-modulated IRIG-B and IEC 61850 Edition 1 only 765.00 €
Ethernet, 1 RJ45 single port + Modulated/Un-modulated IRIG-B and IEC 61850 Edition 1 or 2, without Cyber Security (** see note) 495.00 € Redundant Ethernet PRP or HSR and Dual IP, 3 RJ45 ports + Modulated/Un-modulated IRIG-B and IEC 61850 Edition 1 or 2, without Cyber Security (** see note)
655.00 €
Redundant Ethernet PRP or HSR and Dual IP, 2 LC Ports + 1 RJ45 port + Modulated/Un-modulated IRIG-B and IEC 61850 Edition 1 or 2, without Cyber Security (** see note)
765.00 €
Ethernet, 1 RJ45 single port + Modulated/Un-modulated IRIG-B and IEC 61850 Edition 1 or 2, without Cyber Security (** see note) 640.00 € Redundant Ethernet PRP or HSR and Dual IP, 3 RJ45 ports + Modulated/Un-modulated IRIG-B and IEC 61850 Edition 1 or 2, without Cyber Security (** see note)
800.00 €
Redundant Ethernet PRP or HSR and Dual IP, 2 LC Ports + 1 RJ45 port + Modulated/Un-modulated IRIG-B and IEC 61850 Edition 1 or 2, without Cyber Security (** see note)
910.00 €
* Note: When the 2nd rear comms option is selected, this board also offers InterMiCOM relay - relay signalling ** Note: Please check avalibility and delivert time before any order in 2015
P442
P443
Schneider Electric SA - NRJED113434EN Page 41 of 65
SEPAM, MiCOM and VAMP Price Guide 2015 Section: 05 - MiCOM Px40 series
MiCOM Distance Protection; with 1/3 phase tripping, 1/3 phase auto-reclose and check synchronising 21G, 21P, 25, 27, 46, 46BC, 50,
50BF, 51, 51N, 51FF, 59, 67, 67N, 78, 79, 85
24 inputs and 32 outputs 80TE 9,683.00 €
24 inputs and 46 outputs 80TE 10,030.00 €
P444 PLATFORM - default supply K
Product Platforms K or J (Product options will vary depending on the Hardware platform and the Software Version selected)
Software Options
Default Software Version -
Customer specified and / or customised version Please contact Schneider Electric On Request
Hardware Options12 HSHB contacts (delta price for 3 4HSHB boards instead of 3 8DO boards) 508.00 € IEC61850-9.2 LE Process Bus connection to Merging Unit 578.00 €
Communications Options (P444)
IRIG-B Input (modulated only) 183.00 €
Fibre Optic Convertor 210.00 €
IRIG-B Input (modulated) and Fibre Optic Convertor 276.00 €
2nd rear comms without IRIG-B (* see note) 482.00 €
2nd rear comms with modulated IRIG-B (* see note) 668.00 €
Ethernet Single Port (RJ45 and ST) and IEC 61850 Edition 1 only 495.00 €
Ethernet Single Port (RJ45 and ST) with Modulated or Un-modulated IRIG-B and IEC 61850 Edition 1 only 655.00 €
Redundant Ethernet (2 ST ports 1300nm Multimode) with Modulated or Un-modulated IRIG-B and IEC 61850 Edition 1 only 765.00 €
Ethernet, 1 RJ45 single port + Modulated/Un-modulated IRIG-B and IEC 61850 Edition 1 or 2, without Cyber Security (** see note) 495.00 € Redundant Ethernet PRP or HSR and Dual IP, 3 RJ45 ports + Modulated/Un-modulated IRIG-B and IEC 61850 Edition 1 or 2, without Cyber Security (** see note)
655.00 €
Redundant Ethernet PRP or HSR and Dual IP, 2 LC Ports + 1 RJ45 port + Modulated/Un-modulated IRIG-B and IEC 61850 Edition 1 or 2, without Cyber Security (** see note)
765.00 €
Ethernet, 1 RJ45 single port + Modulated/Un-modulated IRIG-B and IEC 61850 Edition 1 or 2, without Cyber Security (** see note) 640.00 € Redundant Ethernet PRP or HSR and Dual IP, 3 RJ45 ports + Modulated/Un-modulated IRIG-B and IEC 61850 Edition 1 or 2, without Cyber Security (** see note)
800.00 €
Redundant Ethernet PRP or HSR and Dual IP, 2 LC Ports + 1 RJ45 port + Modulated/Un-modulated IRIG-B and IEC 61850 Edition 1 or 2, without Cyber Security (** see note)
910.00 €
* Note: When the 2nd rear comms option is selected, this board also offers InterMiCOM relay - relay signalling ** Note: Please check avalibility and delivert time before any order in 2015
MiCOMho Distance Protection; with 3 phase tripping and 3 phase auto-reclose. Offers mho (phase/ground), and quadrilateral (ground) elements.
21G, 21P, 25, 27, 46, 46BC, 50, 50BF, 51, 51N, 51FF, 59, 59N, 67,
67N, 78, 79, 858 opto inputs and 8 contacts, ring terminals 40TE 6,299.00 €
12 opto inputs and 12 contacts, ring terminals 60TE 7,289.00 €
16 opto inputs and 16 contacts, ring terminals 60TE 7,492.00 €
16 opto inputs, 8 contacts, 4 high break, ring terminals 60TE 7,661.00 €
P445 PLATFORM - default supply L
Product Plaforms L or J (Product options will vary depending on the Hardware platform and the Software Version selected)
Software Options
Default Software Version -
Customer specified and / or customised version Please contact Schneider Electric On Request
Hardware Options
InterMiCOM64 850nm teleprotection, 2 channel 483.00 €
InterMiCOM64 with single 1300nm channel only 1,983.00 €
InterMiCOM64 with one 850nm and one 1300nm channel for 3-ended or dual redundant schemes. 2,463.00 €
InterMiCOM64 with dual 1300nm channel for 3-ended or dual redundant schemes. 3,486.00 € Note: InterMiCOM64 850nm can interface directly to IEEE C37.94 multiplexers, or to G.703 (P591), V.35 (P592), or X.21 (P593). Details of P59x interfaces are shown in the current differential section.
Interface Options
1300nm single mode optical interface (per channel) 1,302.00 €
1300nm multi mode optical interface (per channel) 1,302.00 €
1550nm single mode optical interface (per channel) 2,802.00 € Additional 850nm channel fitted along with any of the three variants above, to allow dual redundant channel communications, with mixed direct fibre and MUX comms.
188.00 €
Note: (850nm interface direct to IEEE C37.94 multiplexer provided as a standard setting option in 850nm model, at no extra cost)
Communications Options
IRIG-B Input (modulated) 183.00 €
Fibre Optic Convertor 210.00 €
IRIG-B Input (modulated) and Fibre Optic Convertor 276.00 €
2nd rear comms without IRIG-B (* see note) 482.00 €
2nd rear comms with modulated IRIG-B (* see note) 668.00 €
Ethernet Single Port (RJ45 and ST) and IEC 61850 Edition 1 only 495.00 €
Ethernet Single Port (RJ45 and ST) with Modulated or Un-modulated IRIG-B and IEC 61850 Edition 1 only 655.00 €
Redundant Ethernet (2 ST ports 1300nm Multimode) with Modulated or Un-modulated IRIG-B and IEC 61850 Edition 1 only 765.00 €
Ethernet, 1 RJ45 single port + Modulated/Un-modulated IRIG-B and IEC 61850 Edition 1 or 2, without Cyber Security (** see note) 495.00 € Redundant Ethernet PRP or HSR and Dual IP, 3 RJ45 ports + Modulated/Un-modulated IRIG-B and IEC 61850 Edition 1 or 2, without Cyber Security (** see note)
655.00 €
Redundant Ethernet PRP or HSR and Dual IP, 2 LC Ports + 1 RJ45 port + Modulated/Un-modulated IRIG-B and IEC 61850 Edition 1 or 2, without Cyber Security (** see note)
765.00 €
Ethernet, 1 RJ45 single port + Modulated/Un-modulated IRIG-B and IEC 61850 Edition 1 or 2, without Cyber Security (** see note) 640.00 € Redundant Ethernet PRP or HSR and Dual IP, 3 RJ45 ports + Modulated/Un-modulated IRIG-B and IEC 61850 Edition 1 or 2, without Cyber Security (** see note)
800.00 €
Redundant Ethernet PRP or HSR and Dual IP, 2 LC Ports + 1 RJ45 port + Modulated/Un-modulated IRIG-B and IEC 61850 Edition 1 or 2, without Cyber Security (** see note)
910.00 €
* Note: When the 2nd rear comms option is selected, this board also offers InterMiCOM relay - relay signalling ** Note: Please check avalibility and delivert time before any order in 2015
P444
P445
Schneider Electric SA - NRJED113434EN Page 42 of 65
SEPAM, MiCOM and VAMP Price Guide 2015 Section: 05 - MiCOM Px40 series
MiCOMho Distance Protection; with 1/3 phase tripping and 1/3 phase auto-reclose. Offers mho, quadrilateral, and directional comparison elements. Fast subcycle tripping for all applications including EHV. Dual breaker model with 2 x 3 phase CT inputs, dual check synchronism, and leader follower reclose control.
21G, 21P, 25-2, 27, 46, 46BC, 49, 50, 50BF-2, 51, 51N, 51FF, 59, 59N, 67, 67N, 68, 78, 79-2, 85,
87DC, 81U/O/R24 opto inputs and 32 contacts, ring terminals 80TE 10,839.00 €
24 opto inputs, 16 contacts, 8 high break, ring terminals 80TE 11,177.00 €
24 opto inputs, 8 contacts, 12 high break, ring terminals 80TE 11,347.00 €
P446 PLATFORM - default supply M
Product Platforms M or K (Product options will vary depending on the Hardware platform and the Software Version selected)
Hardware Options
InterMiCOM64 850nm teleprotection, 2 channel 483.00 €
InterMiCOM64 with single 1300nm channel only 1,983.00 €
InterMiCOM64 with one 850nm and one 1300nm channel for 3-ended or dual redundant schemes. 2,463.00 €
InterMiCOM64 with dual 1300nm channel for 3-ended or dual redundant schemes. 3,486.00 € Note: InterMiCOM64 850nm can interface directly to IEEE C37.94 multiplexers, or to G.703 (P591), V.35 (P592), or X.21 (P593). Details of P59x interfaces are shown in the current differential section.
Communications Options
IRIG-B Input (modulated) 183.00 €
Fibre Optic Convertor 210.00 €
IRIG-B Input (modulated) and Fibre Optic Convertor 276.00 €
2nd rear comms without IRIG-B (* see note) 482.00 €
2nd rear comms with modulated IRIG-B (* see note) 668.00 €
Ethernet Single Port (RJ45 and ST) and IEC 61850 Edition 1 only 495.00 €
Ethernet Single Port (RJ45 and ST) with Modulated or Un-modulated IRIG-B and IEC 61850 Edition 1 only 655.00 €
Redundant Ethernet (2 ST ports 1300nm Multimode) with Modulated or Un-modulated IRIG-B and IEC 61850 Edition 1 only 765.00 €
Ethernet, 1 RJ45 single port + Modulated/Un-modulated IRIG-B and IEC 61850 Edition 1 or 2, without Cyber Security (** see note) 495.00 € Redundant Ethernet PRP or HSR and Dual IP, 3 RJ45 ports + Modulated/Un-modulated IRIG-B and IEC 61850 Edition 1 or 2, without Cyber Security (** see note)
655.00 €
Redundant Ethernet PRP or HSR and Dual IP, 2 LC Ports + 1 RJ45 port + Modulated/Un-modulated IRIG-B and IEC 61850 Edition 1 or 2, without Cyber Security (** see note)
765.00 €
Ethernet, 1 RJ45 single port + Modulated/Un-modulated IRIG-B and IEC 61850 Edition 1 or 2, without Cyber Security (** see note) 640.00 € Redundant Ethernet PRP or HSR and Dual IP, 3 RJ45 ports + Modulated/Un-modulated IRIG-B and IEC 61850 Edition 1 or 2, without Cyber Security (** see note)
800.00 €
Redundant Ethernet PRP or HSR and Dual IP, 2 LC Ports + 1 RJ45 port + Modulated/Un-modulated IRIG-B and IEC 61850 Edition 1 or 2, without Cyber Security (** see note)
910.00 €
* Note: When the 2nd rear comms option is selected, this board also offers InterMiCOM relay - relay signalling ** Note: Please check avalibility and delivert time before any order in 2015
MiCOM Current Differential Protection with overcurrent backup protection. Uses 850nm optical interface 46BC, 49, 50, 51P/51N, 87L 40TE 6,664.00 €
P541 PLATFORM - default supply J
Product Platforms J (Product options will vary depending on the Hardware platform and the Software Version selected)
Software Options
Default Software Version -
Customer specified and / or customised version Please contact Schneider Electric On Request
Interface Options
1300nm single mode optical interface (per channel) 1,302.00 €
1300nm multi mode optical interface (per channel) 1,302.00 €
1550nm single mode optical interface (per channel) 2,802.00 € Additional 850nm channel fitted along with any of the three variants above, to allow dual redundant channel communications, with mixed direct fibre and MUX comms.
188.00 €
Note: (850nm interface direct to IEEE C37.94 multiplexer provided as a standard setting option in 850nm model, at no extra cost)
Communications Options
IRIG-B Input (modulated only) 183.00 €
Fibre Optic Convertor 210.00 €
IRIG-B Input (modulated) and Fibre Optic Convertor 276.00 €
2nd rear comms without IRIG-B (see note) 482.00 €
2nd rear comms with modulated IRIG-B (see note) 668.00 €
MiCOM Current Differential Protection with overcurrent backup protection and 3 phase autoreclose. Uses 850nm optical interface 46BC, 49, 50, 51P/51N, 79, 87L 60TE 7,672.00 €
P542 PLATFORM - default supply J
Product Plaforms J (Product options will vary depending on the Hardware platform and the Software Version selected)
Software Options
Default Software Version -
Customer specified and / or customised version Please contact Schneider Electric On Request
Interface Options
1300nm single mode optical interface (per channel) 1,302.00 €
1300nm multi mode optical interface (per channel) 1,302.00 €
1550nm single mode optical interface (per channel) 2,802.00 € Additional 850nm channel fitted along with any of the three variants above, to allow dual redundant channel communications, with mixed direct fibre and MUX comms.
188.00 €
Note: (850nm interface direct to IEEE C37.94 multiplexer provided as a standard setting option in 850nm model, at no extra cost)
Communications Options
IRIG-B Input (modulated only) 183.00 €
Fibre Optic Convertor 210.00 €
IRIG-B Input (modulated) and Fibre Optic Convertor 276.00 €
2nd rear comms without IRIG-B (see note) 482.00 €
2nd rear comms with modulated IRIG-B (see note) 668.00 €
LINE / CABLE CURRENT DIFFERENTIALP541
P542
P446
Schneider Electric SA - NRJED113434EN Page 43 of 65
SEPAM, MiCOM and VAMP Price Guide 2015 Section: 05 - MiCOM Px40 series
MiCOM Current Differential Protection with distance backup protection and 1/3 phase auto-reclose. Uses 850nm optical interfaceNote - the Prices for models P543 to P546 above are for the base model with no distance protection, see Software options for addiional Distance Price
21G, 21P, 25, 27, 46, 46BC, 49, 50, 50BF, 51, 51N, 51FF, 59, 59N, 67, 67N, 68, 78, 79, 85, 87L, 81U/O/R
16 optical inputs and 14 contact outputs. 60TE 9,286.00 €
P543 PLATFORM - default supply M
Product Platforms M, K or J (Product options will vary depending on the Hardware platform and the Software Version selected)
Software Options
Default Software Version -
Distance Protection Software 1,048.00 €
Customer specified and / or customised version Please contact Schneider Electric On Request
Hardware Options4 HSHB Contacts (delta price for 1 4HSHB board instead of 1 7DO board) 170.00 € Interface Options (P543)
1300nm single mode optical interface (per channel) 1,302.00 €
1300nm multi mode optical interface (per channel) 1,302.00 €
1550nm single mode optical interface (per channel) 2,802.00 € Additional 850nm channel fitted along with any of the three variants above, to allow dual redundant channel communications, with mixed direct fibre and MUX comms.
188.00 €
Note: (850nm interface direct to IEEE C37.94 multiplexer provided as a standard setting option in 850nm model, at no extra cost)
Communications Options
IRIG-B Input (modulated) 183.00 €
Fibre Optic Convertor 210.00 €
IRIG-B Input (modulated) and Fibre Optic Convertor 276.00 €
2nd rear comms without IRIG-B (* see note) 482.00 €
2nd rear comms with modulated IRIG-B (* see note) 668.00 €
Ethernet Single Port (RJ45 and ST) and IEC 61850 Edition 1 only 495.00 €
Ethernet Single Port (RJ45 and ST) with Modulated or Un-modulated IRIG-B and IEC 61850 Edition 1 only 655.00 €
Redundant Ethernet (2 ST ports 1300nm Multimode) with Modulated or Un-modulated IRIG-B and IEC 61850 Edition 1 only 765.00 €
Ethernet, 1 RJ45 single port + Modulated/Un-modulated IRIG-B and IEC 61850 Edition 1 or 2, without Cyber Security (** see note) 495.00 € Redundant Ethernet PRP or HSR and Dual IP, 3 RJ45 ports + Modulated/Un-modulated IRIG-B and IEC 61850 Edition 1 or 2, without Cyber Security (** see note)
655.00 €
Redundant Ethernet PRP or HSR and Dual IP, 2 LC Ports + 1 RJ45 port + Modulated/Un-modulated IRIG-B and IEC 61850 Edition 1 or 2, without Cyber Security (** see note)
765.00 €
Ethernet, 1 RJ45 single port + Modulated/Un-modulated IRIG-B and IEC 61850 Edition 1 or 2, without Cyber Security (** see note) 640.00 € Redundant Ethernet PRP or HSR and Dual IP, 3 RJ45 ports + Modulated/Un-modulated IRIG-B and IEC 61850 Edition 1 or 2, without Cyber Security (** see note)
800.00 €
Redundant Ethernet PRP or HSR and Dual IP, 2 LC Ports + 1 RJ45 port + Modulated/Un-modulated IRIG-B and IEC 61850 Edition 1 or 2, without Cyber Security (** see note)
910.00 €
* Note: When the 2nd rear comms option is selected, this board also offers InterMiCOM relay - relay signalling ** Note: Please check avalibility and delivert time before any order in 2015
MiCOM Current Differential Protection with distance backup protection suitable for breaker and a half configurations. Uses 850nm optical interfaceNote - the Prices for models P543 to P546 above are for the base model with no distance protection, see Software options for addiional Distance Price
21G, 21P, 25-2, 27, 46, 46BC, 49, 50, 50BF-2, 51, 51N, 51FF, 59,
59N, 67, 67N, 68, 78, 79-2, 85, 87L, 81U/O/R
16 optical inputs and 14 contact outputs. 60TE 9,726.00 €
P544 PLATFORM - default supply M
Product Platforms M, K or J (Product options will vary depending on the Hardware platform and the Software Version selected)
Software Options
Default Software Version -
Distance Protection Software 1,048.00 €
Customer specified and / or customised version Please contact Schneider Electric On Request
Hardware Options4 HSHB Contacts (delta price for 1 4HSHB board instead of 1 7DO board) 170.00 € Interface Options
1300nm single mode optical interface (per channel) 1,302.00 €
1300nm multi mode optical interface (per channel) 1,302.00 €
1550nm single mode optical interface (per channel) 2,802.00 € Additional 850nm channel fitted along with any of the three variants above, to allow dual redundant channel communications, with mixed direct fibre and MUX comms.
188.00 €
Note: (850nm interface direct to IEEE C37.94 multiplexer provided as a standard setting option in 850nm model, at no extra cost)
Communications Options
IRIG-B Input (modulated) 183.00 €
Fibre Optic Convertor 210.00 €
IRIG-B Input (modulated) and Fibre Optic Convertor 276.00 €
2nd rear comms without IRIG-B (* see note) 482.00 €
2nd rear comms with modulated IRIG-B (* see note) 668.00 €
Ethernet Single Port (RJ45 and ST) and IEC 61850 Edition 1 only 495.00 €
Ethernet Single Port (RJ45 and ST) with Modulated or Un-modulated IRIG-B and IEC 61850 Edition 1 only 655.00 €
Redundant Ethernet (2 ST ports 1300nm Multimode) with Modulated or Un-modulated IRIG-B and IEC 61850 Edition 1 only 765.00 €
Ethernet, 1 RJ45 single port + Modulated/Un-modulated IRIG-B and IEC 61850 Edition 1 or 2, without Cyber Security (** see note) 495.00 € Redundant Ethernet PRP or HSR and Dual IP, 3 RJ45 ports + Modulated/Un-modulated IRIG-B and IEC 61850 Edition 1 or 2, without Cyber Security (** see note)
655.00 €
Redundant Ethernet PRP or HSR and Dual IP, 2 LC Ports + 1 RJ45 port + Modulated/Un-modulated IRIG-B and IEC 61850 Edition 1 or 2, without Cyber Security (** see note)
765.00 €
Ethernet, 1 RJ45 single port + Modulated/Un-modulated IRIG-B and IEC 61850 Edition 1 or 2, without Cyber Security (** see note) 640.00 € Redundant Ethernet PRP or HSR and Dual IP, 3 RJ45 ports + Modulated/Un-modulated IRIG-B and IEC 61850 Edition 1 or 2, without Cyber Security (** see note)
800.00 €
Redundant Ethernet PRP or HSR and Dual IP, 2 LC Ports + 1 RJ45 port + Modulated/Un-modulated IRIG-B and IEC 61850 Edition 1 or 2, without Cyber Security (** see note)
910.00 €
* Note: When the 2nd rear comms option is selected, this board also offers InterMiCOM relay - relay signalling ** Note: Please check avalibility and delivert time before any order in 2015
P543
P544
Schneider Electric SA - NRJED113434EN Page 44 of 65
SEPAM, MiCOM and VAMP Price Guide 2015 Section: 05 - MiCOM Px40 series
MiCOM Current Differential Protection with distance backup protection and 1/3 phase auto-reclose. Uses 850nm optical interfaceNote - the Prices for models P543 to P546 above are for the base model with no distance protection, see Software options for addiional Distance Price
21G, 21P, 25, 27, 46, 46BC, 49, 50, 50BF, 51, 51N, 51FF, 59, 59N, 67, 67N, 68, 78, 79, 85, 87L, 81U/O/R
Basic device with 24 opto inputs and 32 contact outputs. 80TE 10,043.00 €
P545 PLATFORM - default supply M
Product Platforms M, K or J (Product options will vary depending on the Hardware platform and the Software Version selected)
Software Options
Default Software Version -
Distance Protection Software 1,048.00 €
Customer specified and / or customised version Please contact Schneider Electric On Request
Hardware Options
Note: 1 additional card slot available for DI/DO ex tension (8DI or HSHB contacts)
8DI board 279.00 € 8 HSHB Contacts (delta price for 2 4HSHB boards instead of 2 8DO boards) 338.00 € Interface Options
1300nm single mode optical interface (per channel) 1,302.00 €
1300nm multi mode optical interface (per channel) 1,302.00 €
1550nm single mode optical interface (per channel) 2,802.00 € Additional 850nm channel fitted along with any of the three variants above, to allow dual redundant channel communications, with mixed direct fibre and MUX comms.
188.00 €
Note: (850nm interface direct to IEEE C37.94 multiplexer provided as a standard setting option in 850nm model, at no extra cost)
Communications Options
IRIG-B Input (modulated) 183.00 €
Fibre Optic Convertor 210.00 €
IRIG-B Input (modulated) and Fibre Optic Convertor 276.00 €
2nd rear comms without IRIG-B (* see note) 482.00 €
2nd rear comms with modulated IRIG-B (* see note) 668.00 €
Ethernet Single Port (RJ45 and ST) and IEC 61850 Edition 1 only 495.00 €
Ethernet Single Port (RJ45 and ST) with Modulated or Un-modulated IRIG-B and IEC 61850 Edition 1 only 655.00 €
Redundant Ethernet (2 ST ports 1300nm Multimode) with Modulated or Un-modulated IRIG-B and IEC 61850 Edition 1 only 765.00 €
Ethernet, 1 RJ45 single port + Modulated/Un-modulated IRIG-B and IEC 61850 Edition 1 or 2, without Cyber Security (** see note) 495.00 € Redundant Ethernet PRP or HSR and Dual IP, 3 RJ45 ports + Modulated/Un-modulated IRIG-B and IEC 61850 Edition 1 or 2, without Cyber Security (** see note)
655.00 €
Redundant Ethernet PRP or HSR and Dual IP, 2 LC Ports + 1 RJ45 port + Modulated/Un-modulated IRIG-B and IEC 61850 Edition 1 or 2, without Cyber Security (** see note)
765.00 €
Ethernet, 1 RJ45 single port + Modulated/Un-modulated IRIG-B and IEC 61850 Edition 1 or 2, without Cyber Security (** see note) 640.00 € Redundant Ethernet PRP or HSR and Dual IP, 3 RJ45 ports + Modulated/Un-modulated IRIG-B and IEC 61850 Edition 1 or 2, without Cyber Security (** see note)
800.00 €
Redundant Ethernet PRP or HSR and Dual IP, 2 LC Ports + 1 RJ45 port + Modulated/Un-modulated IRIG-B and IEC 61850 Edition 1 or 2, without Cyber Security (** see note)
910.00 €
* Note: When the 2nd rear comms option is selected, this board also offers InterMiCOM relay - relay signalling ** Note: Please check avalibility and delivert time before any order in 2015
MiCOM Current Differential Protection with distance backup protection suitable for breaker and a half configurations. Uses 850nm optical interfaceNote - the Prices for models P543 to P546 above are for the base model with no distance protection, see Software options for addiional Distance Price
21G, 21P, 25-2, 27, 46, 46BC, 49, 50, 50BF-2, 51, 51N, 51FF, 59,
59N, 67, 67N, 68, 78, 79-2, 85, 87L, 81U/O/R
24 optical inputs and 32 contact outputs. 80TE 10,482.00 €
P546 PLATFORM - default supply M
Product Platforms M, K or J (Product options will vary depending on the Hardware platform and the Software Version selected)
Software Options
Default Software Version -
Distance Protection Software 1,048.00 €
Customer specified and / or customised version Please contact Schneider Electric On Request
Hardware Options8 HSHB contacts (delta price for 2 4HSHB boards instead of 2 8DO boards) 338.00 € 12 HSHB contacts (delta price for 3 4HSHB boards instead of 3 8DO boards) 508.00 € Interface Options
1300nm single mode optical interface (per channel) 1,302.00 €
1300nm multi mode optical interface (per channel) 1,302.00 €
1550nm single mode optical interface (per channel) 2,802.00 € Additional 850nm channel fitted along with any of the three variants above, to allow dual redundant channel communications, with mixed direct fibre and MUX comms.
188.00 €
Note: (850nm interface direct to IEEE C37.94 multiplexer provided as a standard setting option in 850nm model, at no extra cost)
Communications Options
IRIG-B Input (modulated) 183.00 €
Fibre Optic Convertor 210.00 €
IRIG-B Input (modulated) and Fibre Optic Convertor 276.00 €
2nd rear comms without IRIG-B (* see note) 482.00 €
2nd rear comms with modulated IRIG-B (* see note) 668.00 €
Ethernet Single Port (RJ45 and ST) and IEC 61850 Edition 1 only 495.00 €
Ethernet Single Port (RJ45 and ST) with Modulated or Un-modulated IRIG-B and IEC 61850 Edition 1 only 655.00 €
Redundant Ethernet (2 ST ports 1300nm Multimode) with Modulated or Un-modulated IRIG-B and IEC 61850 Edition 1 only 765.00 €
Ethernet, 1 RJ45 single port + Modulated/Un-modulated IRIG-B and IEC 61850 Edition 1 or 2, without Cyber Security (** see note) 495.00 € Redundant Ethernet PRP or HSR and Dual IP, 3 RJ45 ports + Modulated/Un-modulated IRIG-B and IEC 61850 Edition 1 or 2, without Cyber Security (** see note)
655.00 €
Redundant Ethernet PRP or HSR and Dual IP, 2 LC Ports + 1 RJ45 port + Modulated/Un-modulated IRIG-B and IEC 61850 Edition 1 or 2, without Cyber Security (** see note)
765.00 €
Ethernet, 1 RJ45 single port + Modulated/Un-modulated IRIG-B and IEC 61850 Edition 1 or 2, without Cyber Security (** see note) 640.00 € Redundant Ethernet PRP or HSR and Dual IP, 3 RJ45 ports + Modulated/Un-modulated IRIG-B and IEC 61850 Edition 1 or 2, without Cyber Security (** see note)
800.00 €
Redundant Ethernet PRP or HSR and Dual IP, 2 LC Ports + 1 RJ45 port + Modulated/Un-modulated IRIG-B and IEC 61850 Edition 1 or 2, without Cyber Security (** see note)
910.00 €
* Note: When the 2nd rear comms option is selected, this board also offers InterMiCOM relay - relay signalling ** Note: Please check avalibility and delivert time before any order in 2015
P545
P546
Schneider Electric SA - NRJED113434EN Page 45 of 65
SEPAM, MiCOM and VAMP Price Guide 2015 Section: 05 - MiCOM Px40 series
P591 G703 Interface Module for the P540 range, P521, P443 & P445. 1,298.00 €
P593 X21 Interface Module for the P540 range, P521, P443 & P445. 1,582.00 €
P594 High accuracy GPS synchronising module. Also used with P543 - P546 for unequal propogation delay SONET/SDH communications. New enhanced model with IRIG-B, pulse and fibre outputs for use as the single substation time reference.
P594 GPS module only 2,186.00 €
25 meter cable, antenna and surge arrester 986.00 €
50 meter cable, antenna, surge arrester and amplifier 1,586.00 €
P595 Interface Device 2,020.00 €
P-2M-LXA 850nm Multi-mode MICOM G703 Optic/Electric Interface Unit for the P540 range, P521, P443, P445 & P446. 19", 1U rack 1,629.00 €
P-2M-LXB 1300nm Single mode MICOM G703 Optic/Electric Interface Unit for the P540 range, P521, P443, P445 & P446. 19", 1U rack 2,029.00 €
MiCOM two ended line unit protection with overcurrent backup, CT only model.Must be used with approved power line carrier equipment (Available in English and Russian only)
46BC, 50/51P, 50/51N, 50BF, 49, 87PC
with 8 binary inputs, and 8 output relays 40TE 7,426.00 €
P547 PLATFORM - default supply J
Product Platforms J (Product options will vary depending on the Hardware platform and the Software Version selected)
Software Options
Default Software Version -
Customer specified and / or customised version Please contact Schneider Electric On Request
Communications Options
IRIG-B Input (modulated only) 183.00 €
Fibre Optic Convertor 210.00 €
IRIG-B Input (modulated) and Fibre Optic Convertor 276.00 €
2nd rear comms without IRIG-B (see note) 482.00 €
2nd rear comms with modulated IRIG-B 668.00 €
MiCOM 2 or 3 ended line unit protection, enhanced model with CT and VT inputs, voltage compensation, and subcycle distance elements.Must be used with approved power line carrier equipment (Available in English and Russian only)
21G, 21P, 25, 27, 46, 46BC, 49, 50, 50BF, 51, 51N, 51FF, 59, 59N, 67,
67N, 68, 78, 79, 85, 87PC, 81U/O/R
with 16 binary inputs, and 16 output relays 80TE 11,296.00 €
with 24 binary inputs, and 32 output relays 80TE 11,997.00 €
P547 PLATFORM - default supply K
Product Plaforms K (Product options will vary depending on the Hardware platform and the Software Version selected)
Software Options
Default Software Version -
Customer specified and / or customised version Please contact Schneider Electric On Request
Hardware Options4 HSHB Contacts (delta price for 1 4HSHB board instead of 2 8DO board) 170.00 € 8 HSHB Contacts (delta price for 2 4HSHB boards instead of 2 8DO boards) 338.00 €
Communications Options
IRIG-B Input (modulated) 183.00 €
Fibre Optic Convertor 210.00 €
IRIG-B Input (modulated) and Fibre Optic Convertor 276.00 €
2nd rear comms without IRIG-B (* see note) 482.00 €
2nd rear comms with modulated IRIG-B (* see note) 668.00 €
Ethernet Single Port (RJ45 and ST) and IEC 61850 Edition 1 only 495.00 €
Ethernet Single Port (RJ45 and ST) with Modulated or Un-modulated IRIG-B and IEC 61850 Edition 1 only 655.00 €
Redundant Ethernet (2 ST ports 1300nm Multimode) with Modulated or Un-modulated IRIG-B and IEC 61850 Edition 1 only 765.00 €
Ethernet, 1 RJ45 single port + Modulated/Un-modulated IRIG-B and IEC 61850 Edition 1 or 2, without Cyber Security (** see note) 495.00 € Redundant Ethernet PRP or HSR and Dual IP, 3 RJ45 ports + Modulated/Un-modulated IRIG-B and IEC 61850 Edition 1 or 2, without Cyber Security (** see note)
655.00 €
Redundant Ethernet PRP or HSR and Dual IP, 2 LC Ports + 1 RJ45 port + Modulated/Un-modulated IRIG-B and IEC 61850 Edition 1 or 2, without Cyber Security (** see note)
765.00 €
Ethernet, 1 RJ45 single port + Modulated/Un-modulated IRIG-B and IEC 61850 Edition 1 or 2, without Cyber Security (** see note) 640.00 € Redundant Ethernet PRP or HSR and Dual IP, 3 RJ45 ports + Modulated/Un-modulated IRIG-B and IEC 61850 Edition 1 or 2, without Cyber Security (** see note)
800.00 €
Redundant Ethernet PRP or HSR and Dual IP, 2 LC Ports + 1 RJ45 port + Modulated/Un-modulated IRIG-B and IEC 61850 Edition 1 or 2, without Cyber Security (** see note)
910.00 €
* Note: When the 2nd rear comms option is selected, this board also offers InterMiCOM relay - relay signalling ** Note: Please check avalibility and delivert time before any order in 2015
P59x suffix B
P-2M-L
PHASE COMPARISONP547 40TE
P547 80TE
Schneider Electric SA - NRJED113434EN Page 46 of 65
SEPAM, MiCOM and VAMP Price Guide 2015 Section: 05 - MiCOM Px40 series
Transformer differential protection for 2 winding transformers. Two sets of bias inputs, plus restricted earth fault protection for each winding. With single phase VT input for overflux functionality.
87, 87REF/67N, 46, 50P, 50N/G, 51P, 51N/G, 49, 81O, 81U, 81R, 24,
LoL, CTSbasic device with 8 opto inputs and 8 contacts 40TE 4,296.00 €
P642 PLATFORM - default supply J
Product Plaforms J (Product options will vary depending on the Hardware platform and the Software Version selected)
Software Options
Default Software Version -
Customer specified and / or customised version Please contact Schneider Electric On Request
Hardware Options
Additional 1-Phase VT input module with negative sequence overvoltage and voltage controlled overcurrent 47, 51V 450.00 €
Note: 1 additional card slot is available for extension DI/DO board or 4HB or RTD or CLIO board
RTD 502.00 €
CLIO 493.00 €
4DI + 4DO board 288.00 €
4 HSHB Outputs 309.00 €
Communications Options
IRIG-B Input (modulated) 183.00 €
Fibre Optic Convertor 210.00 €
IRIG-B Input (modulated) and Fibre Optic Convertor 277.00 €
2nd rear comms without IRIG-B 482.00 €
2nd rear comms with modulated IRIG-B 668.00 €
Ethernet Single Port (RJ45 and ST) and IEC 61850 Edition 1 only 495.00 €
Ethernet Single Port (RJ45 and ST) with Modulated or Un-modulated IRIG-B and IEC 61850 Edition 1 only 655.00 €
Redundant Ethernet (2 ST ports 1300nm Multimode) with Modulated or Un-modulated IRIG-B and IEC 61850 Edition 1 only 765.00 €
Ethernet, 1 RJ45 single port + Modulated/Un-modulated IRIG-B and IEC 61850 Edition 1 or 2, without Cyber Security (* see note) 495.00 € Redundant Ethernet PRP or HSR and Dual IP, 3 RJ45 ports + Modulated/Un-modulated IRIG-B and IEC 61850 Edition 1 or 2, without Cyber Security (* see note)
655.00 €
Redundant Ethernet PRP or HSR and Dual IP, 2 LC Ports + 1 RJ45 port + Modulated/Un-modulated IRIG-B and IEC 61850 Edition 1 or 2, without Cyber Security (* see note)
765.00 €
Ethernet, 1 RJ45 single port + Modulated/Un-modulated IRIG-B and IEC 61850 Edition 1 or 2, without Cyber Security (* see note) 640.00 € Redundant Ethernet PRP or HSR and Dual IP, 3 RJ45 ports + Modulated/Un-modulated IRIG-B and IEC 61850 Edition 1 or 2, without Cyber Security(* see note)
800.00 €
Redundant Ethernet PRP or HSR and Dual IP, 2 LC Ports + 1 RJ45 port + Modulated/Un-modulated IRIG-B and IEC 61850 Edition 1 or 2, without Cyber Security (* see note)
910.00 €
* Note: Please check avalibility and delivert time before any order in 2015
Transformer differential protection for 2 or 3 winding transformers. Three sets of bias inputs, plus restricted earth fault protection for each winding. With single phase VT input for overflux functionality.
87, 87REF/67N, 46, 50P, 50N/G, 51P, 51N/G, 49, 81O, 81U, 81R, 24,
LoL, CTSbasic device with 16 opto inputs and 16 contacts 60TE 4,923.00 €
P643 PLATFORM - default supply K
Product Plaforms K (Product options will vary depending on the Hardware platform and the Software Version selected)
Software Options
Default Software Version -
Customer specified and / or customised version Please contact Schneider Electric On Request
Hardware Options
Additional 3-Phase VT input module with directionalising for overcurrent, voltage controlled overcurrent and negative sequence overvoltage27, 59, 59N, 67, 67N, 46/67Q, 47,
51V562.00 €
Note: 1 additional card slot is available for extension DI/DO board or 4HB or RTD or CLIO board
RTD 502.00 €
CLIO 493.00 €
8 Inputs 279.00 €
8 ouputs 211.00 €
4 HSHB Outputs 309.00 €
Communications Options
IRIG-B Input (modulated) 183.00 €
Fibre Optic Convertor 210.00 €
IRIG-B Input (modulated) and Fibre Optic Convertor 277.00 €
2nd rear comms without IRIG-B 482.00 €
2nd rear comms with modulated IRIG-B 668.00 €
Ethernet Single Port (RJ45 and ST) and IEC 61850 Edition 1 only 495.00 €
Ethernet Single Port (RJ45 and ST) with Modulated or Un-modulated IRIG-B and IEC 61850 Edition 1 only 655.00 €
Redundant Ethernet (2 ST ports 1300nm Multimode) with Modulated or Un-modulated IRIG-B and IEC 61850 Edition 1 only 765.00 €
Ethernet, 1 RJ45 single port + Modulated/Un-modulated IRIG-B and IEC 61850 Edition 1 or 2, without Cyber Security (* see note) 495.00 € Redundant Ethernet PRP or HSR and Dual IP, 3 RJ45 ports + Modulated/Un-modulated IRIG-B and IEC 61850 Edition 1 or 2, without Cyber Security (* see note)
655.00 €
Redundant Ethernet PRP or HSR and Dual IP, 2 LC Ports + 1 RJ45 port + Modulated/Un-modulated IRIG-B and IEC 61850 Edition 1 or 2, without Cyber Security (* see note)
765.00 €
Ethernet, 1 RJ45 single port + Modulated/Un-modulated IRIG-B and IEC 61850 Edition 1 or 2, without Cyber Security (* see note) 640.00 € Redundant Ethernet PRP or HSR and Dual IP, 3 RJ45 ports + Modulated/Un-modulated IRIG-B and IEC 61850 Edition 1 or 2, without Cyber Security(* see note)
800.00 €
Redundant Ethernet PRP or HSR and Dual IP, 2 LC Ports + 1 RJ45 port + Modulated/Un-modulated IRIG-B and IEC 61850 Edition 1 or 2, without Cyber Security (* see note)
910.00 €
* Note: Please check avalibility and delivert time before any order in 2015
P643
INTEGRATED TRANSFORMER MANAGEMENTP642
Schneider Electric SA - NRJED113434EN Page 47 of 65
SEPAM, MiCOM and VAMP Price Guide 2015 Section: 05 - MiCOM Px40 series
Transformer differential protection for 2 or 3 winding transformers. Five sets of bias inputs, plus restricted earth fault protection for each winding. With single phase VT input for overflux functionality.
87, 87REF/67N, 46, 50P, 50N/G, 51P, 51N/G, 49, 81O, 81U, 81R, 24,
LoL, CTSbasic device with 16 opto inputs and 16 contacts 60TE 5,989.00 €
basic device in larger case with 24 opto inputs and 24 contacts 80TE 6,523.00 €
P645 PLATFORM - default supply K
Product Plaforms K (Product options will vary depending on the Hardware platform and the Software Version selected)
Software Options
Default Software Version -
Customer specified and / or customised version Please contact Schneider Electric On Request
Hardware Options
Additional 3-Phase VT input module with directionalising for overcurrent, voltage controlled overcurrent and negative sequence overvoltage27, 59, 59N, 67, 67N, 46/67Q, 47,
51V60 or 80TE 562.00 €
Note: For 60TE case, 1 additional card slot is available for extension DI/DO board or 4HB or RTD or CLIO board
RTD 502.00 €
CLIO 493.00 €
8 inputs 279.00 €
8 outputs 211.00 €
4 HB contacts 309.00 €
Note: For 80TE case, 2 additional card slots are available for adding 1 of RTD or CLIO board, RTD+ CLIO boards
RTD 502.00 €
CLIO 493.00 €
RTD and CLIO 996.00 €
4 HSHB contacts (delta price for 1 4HSHB board instead of 1 8DO board) 170.00 €
RTD+4 HSHB contacts (delta price for 1 4HSHB board instead of 1 8DO board ) 671.00 €
CLIO+4 HSHB contacts (delta price for 1 4HSHB board instead of 1 8DO board ) 663.00 €
RTD +CLIO + 4 HSHB (delta price for 1 4HSHB board instead of 1 8DO board ) 1,165.00 €
8 HSHB contacts (delta price for 2 4HSHB boards instead of 1 8D1 board and 1 8DO board) 199.00 €
RTD + 8 HSHB (delta price for 2 4HSHB boards instead of 1 8D1 board and 1 8DO board) 700.00 €
CLIO + 8 HSHB (delta price for 2 4HSHB boards instead of 1 8D1 board and 1 8DO board) 692.00 €
RTD + CLIO +8 HSHB (delta price for 2 4HSHB boards instead of 1 8D1 board and 1 8DO board) 1,195.00 €
Communications Options
IRIG-B Input (modulated) 183.00 €
Fibre Optic Convertor 210.00 €
IRIG-B Input (modulated) and Fibre Optic Convertor 277.00 €
2nd rear comms without IRIG-B 482.00 €
2nd rear comms with modulated IRIG-B 668.00 €
Ethernet Single Port (RJ45 and ST) and IEC 61850 Edition 1 only 495.00 €
Ethernet Single Port (RJ45 and ST) with Modulated or Un-modulated IRIG-B and IEC 61850 Edition 1 only 655.00 €
Redundant Ethernet (2 ST ports 1300nm Multimode) with Modulated or Un-modulated IRIG-B and IEC 61850 Edition 1 only 765.00 €
Ethernet, 1 RJ45 single port + Modulated/Un-modulated IRIG-B and IEC 61850 Edition 1 or 2, without Cyber Security (* see note) 495.00 € Redundant Ethernet PRP or HSR and Dual IP, 3 RJ45 ports + Modulated/Un-modulated IRIG-B and IEC 61850 Edition 1 or 2, without Cyber Security (* see note)
655.00 €
Redundant Ethernet PRP or HSR and Dual IP, 2 LC Ports + 1 RJ45 port + Modulated/Un-modulated IRIG-B and IEC 61850 Edition 1 or 2, without Cyber Security (* see note)
765.00 €
Ethernet, 1 RJ45 single port + Modulated/Un-modulated IRIG-B and IEC 61850 Edition 1 or 2, without Cyber Security (* see note) 640.00 € Redundant Ethernet PRP or HSR and Dual IP, 3 RJ45 ports + Modulated/Un-modulated IRIG-B and IEC 61850 Edition 1 or 2, without Cyber Security(* see note)
800.00 €
Redundant Ethernet PRP or HSR and Dual IP, 2 LC Ports + 1 RJ45 port + Modulated/Un-modulated IRIG-B and IEC 61850 Edition 1 or 2, without Cyber Security (* see note)
910.00 €
* Note: Please check avalibility and delivert time before any order in 2015
MiCOM Busbar Protection - Central Unit. Can be configured for up to 8 zones, with 8 digital inputs and 8 relay outputs - peripheral comms boards not included - max 7 boards (=28 peripheral units).
87, CTS 80TE On Request
P741 PLATFORM - default supply K
Product Plaforms K (Product options will vary depending on the Hardware platform and the Software Version selected)
Software Options
Default Software Version -
Customer specified and / or customised version Please contact Schneider Electric On Request
Hardware Options
Communication Board (use with 4 peripheral units) On RequestCommunication Board (use with 8 peripheral units) On RequestCommunication Board (use with 12 peripheral units) On RequestCommunication Board (use with 16 peripheral units) On RequestCommunication Board (use with 20 peripheral units) On RequestCommunication Board (use with 24 peripheral units) On RequestCommunication Board (use with 28 peripheral units) On RequestCommunications Options
IRIG-B Input (modulated) 183.00 €
2nd rear comms without IRIG-B (* see note) 482.00 €
2nd rear comms with modulated IRIG-B (* see note) 668.00 €
Ethernet Single Port (RJ45 and ST) and IEC 61850 Edition 1 only 495.00 €
Ethernet Single Port (RJ45 and ST) with Modulated or Un-modulated IRIG-B and IEC 61850 Edition 1 only 655.00 €
Redundant Ethernet (2 ST ports 1300nm Multimode) with Modulated or Un-modulated IRIG-B and IEC 61850 Edition 1 only 765.00 €
Ethernet, 1 RJ45 single port + Modulated/Un-modulated IRIG-B and IEC 61850 Edition 1 or 2, without Cyber Security (** see note) 495.00 € Redundant Ethernet PRP or HSR and Dual IP, 3 RJ45 ports + Modulated/Un-modulated IRIG-B and IEC 61850 Edition 1 or 2, without Cyber Security (** see note)
655.00 €
Redundant Ethernet PRP or HSR and Dual IP, 2 LC Ports + 1 RJ45 port + Modulated/Un-modulated IRIG-B and IEC 61850 Edition 1 or 2, without Cyber Security (** see note)
765.00 €
Ethernet, 1 RJ45 single port + Modulated/Un-modulated IRIG-B and IEC 61850 Edition 1 or 2, without Cyber Security (** see note) 640.00 € Redundant Ethernet PRP or HSR and Dual IP, 3 RJ45 ports + Modulated/Un-modulated IRIG-B and IEC 61850 Edition 1 or 2, without Cyber Security (** see note)
800.00 €
Redundant Ethernet PRP or HSR and Dual IP, 2 LC Ports + 1 RJ45 port + Modulated/Un-modulated IRIG-B and IEC 61850 Edition 1 or 2, without Cyber Security (** see note)
910.00 €
* Note: When the 2nd rear comms option is selected, this board also offers InterMiCOM relay - relay signalling ** Note: Please check avalibility and delivert time before any order in 2015
P645
60TE only
80TE only
LOW IMPEDANCE BUSBAR DIFFERENTIALP741
Schneider Electric SA - NRJED113434EN Page 48 of 65
SEPAM, MiCOM and VAMP Price Guide 2015 Section: 05 - MiCOM Px40 series
MiCOM Busbar Protection - Peripheral Unit with 16 digital inputs, 8 relay outputs 50, 51, 50/51N, 50BF, 86 40TE On Request
P742 PLATFORM - default supply J
Product Plaforms J (Product options will vary depending on the Hardware platform and the Software Version selected)
MiCOM Busbar Protection - Peripheral Unit with 24 digital inputs, 16 relay outputs 50, 51, 50/51N, 50BF, 86 60TE On Request
P743 PLATFORM - default supply K
Product Plaforms K (Product options will vary depending on the Hardware platform and the Software Version selected)
Software Options
Default Software Version -
Customer specified and / or customised version Please contact Schneider Electric On Request
Hardware Options
Communication Board (use with 4 peripheral units) On Request
Communications Options
2nd rear comms without IRIG-B (* see note) 482.00 €
Ethernet Single Port (RJ45 and ST) and IEC 61850 Edition 1 only 495.00 €
Redundant Ethernet (2 ST ports 1300nm Multimode) with Modulated or Un-modulated IRIG-B and IEC 61850 Edition 1 only 765.00 €
Ethernet, 1 RJ45 single port + Modulated/Un-modulated IRIG-B and IEC 61850 Edition 1 or 2, without Cyber Security (** see note) 495.00 € Redundant Ethernet PRP or HSR and Dual IP, 3 RJ45 ports + Modulated/Un-modulated IRIG-B and IEC 61850 Edition 1 or 2, without Cyber Security (** see note)
655.00 €
Redundant Ethernet PRP or HSR and Dual IP, 2 LC Ports + 1 RJ45 port + Modulated/Un-modulated IRIG-B and IEC 61850 Edition 1 or 2, without Cyber Security (** see note)
765.00 €
Ethernet, 1 RJ45 single port + Modulated/Un-modulated IRIG-B and IEC 61850 Edition 1 or 2, without Cyber Security (** see note) 640.00 € Redundant Ethernet PRP or HSR and Dual IP, 3 RJ45 ports + Modulated/Un-modulated IRIG-B and IEC 61850 Edition 1 or 2, without Cyber Security (** see note)
800.00 €
Redundant Ethernet PRP or HSR and Dual IP, 2 LC Ports + 1 RJ45 port + Modulated/Un-modulated IRIG-B and IEC 61850 Edition 1 or 2, without Cyber Security (** see note)
910.00 €
* Note: When the 2nd rear comms option is selected, this board also offers InterMiCOM relay - relay signalling ** Note: Please check avalibility and delivert time before any order in 2015
MiCOM Busbar Protection centralised in a single box solution, for up to 7 feeders and 4 zones. Use one relay per phase for up to 21 feeders.
87, 87CZ, 50DZ, CTS, 50/51, 50/51N, 50BF, 86, VTS
Basice device with 16 opto inputs and 16 contacts, ring terminals 80TE
P746 PLATFORM - default supply M
Product Plaforms M or K (Product options will vary depending on the Hardware platform and the Software Version selected)
Hardware platform K: for up to 6 feeders and 2 zones. 8,130.00 €
Hardware platform M: for up to 6 feeders and 4 zones. 7,885.00 €
Hardware platform M: for up to 7 feeders and 4 zones. 8,516.00 €
Software Options
Default Software Version -
Customer specified and / or customised version Please contact Schneider Electric On Request
Hardware Options
Note: 4 additional card slots available for DI/DO extension
8 HSHB contacts (delta price for 2 4HSHB boards instead of 1 8DO board) 478.00 € 2 x 8DO boards 422.00 € 8DO board + 4HSHB board 520.00 € 8DI board + 8DO board 490.00 € 8DI board + 2×4HSHB boards 897.00 € 8DI board + 2×4HSHB boards and another 4HSHB board instead of 8DO board 1,067.00 € 2×8DI boards + 8DO board 770.00 € 2×8DI boards + 2×8DO boards 982.00 € 2×8DI boards + 2×4HSHB boards 1,176.00 € 3×8DI boards + 8DO board 1,050.00 € 2×8DI boards+ 2×8DO board 982.00 € Communications Options
IRIG-B Input (modulated) 183.00 €
Fibre Optic Convertor 210.00 €
IRIG-B Input (modulated) and Fibre Optic Convertor 276.00 €
2nd rear comms without IRIG-B 482.00 €
2nd rear comms with modulated IRIG-B 668.00 €
Ethernet Single Port (RJ45 and ST) and IEC 61850 Edition 1 only 495.00 €
Ethernet Single Port (RJ45 and ST) with Modulated or Un-modulated IRIG-B and IEC 61850 Edition 1 only 655.00 €
Redundant Ethernet (2 ST ports 1300nm Multimode) with Modulated or Un-modulated IRIG-B and IEC 61850 Edition 1 only 765.00 €
Ethernet, 1 RJ45 single port + Modulated/Un-modulated IRIG-B and IEC 61850 Edition 1 or 2, without Cyber Security (* see note) 495.00 € Redundant Ethernet PRP or HSR and Dual IP, 3 RJ45 ports + Modulated/Un-modulated IRIG-B and IEC 61850 Edition 1 or 2, without Cyber Security (* see note)
655.00 €
Redundant Ethernet PRP or HSR and Dual IP, 2 LC Ports + 1 RJ45 port + Modulated/Un-modulated IRIG-B and IEC 61850 Edition 1 or 2, without Cyber Security (* see note)
765.00 €
Ethernet, 1 RJ45 single port + Modulated/Un-modulated IRIG-B and IEC 61850 Edition 1 or 2, without Cyber Security (* see note) 640.00 € Redundant Ethernet PRP or HSR and Dual IP, 3 RJ45 ports + Modulated/Un-modulated IRIG-B and IEC 61850 Edition 1 or 2, without Cyber Security(* see note)
800.00 €
Redundant Ethernet PRP or HSR and Dual IP, 2 LC Ports + 1 RJ45 port + Modulated/Un-modulated IRIG-B and IEC 61850 Edition 1 or 2, without Cyber Security (* see note)
910.00 €
* Note: Please check avalibility and delivert time before any order in 2015
P742
P743
P746
Schneider Electric SA - NRJED113434EN Page 49 of 65
SEPAM, MiCOM and VAMP Price Guide 2015 Section: 05 - MiCOM Px40 series
Transmission line terminal IED, with autoreclosing, check synchronism, breaker fail, fault locator, and directional overcurrent and earth protection. Used as breaker management terminal, Main 2 and/or backup protection. Single breaker model A.
25, 27, 46, 46BC, 49, 50, 50BF, 51, 51N, 51FF, 59, 59N, 67, 67N, 79,
81U/O/R60TE
16 opto inputs and 14 contacts. 60TE 4,600.00 €
P841 PLATFORM - default supply M
Product Plaforms M or K (Product options will vary depending on the Hardware platform and the Software Version selected)
Software Options
Default Software Version -
Hardware Options4 HSHB Contacts (delta price for 1 4HSHB board instead of 1 7DO board) 169.00 € Communications Options
IRIG-B Input (modulated) 183.00 €
Fibre Optic Convertor 210.00 €
IRIG-B Input (modulated) and Fibre Optic Convertor 276.00 €
2nd rear comms without IRIG-B (* see note) 482.00 €
2nd rear comms with modulated IRIG-B (* see note) 668.00 €
Ethernet Single Port (RJ45 and ST) and IEC 61850 Edition 1 only 495.00 €
Ethernet Single Port (RJ45 and ST) with Modulated or Un-modulated IRIG-B and IEC 61850 Edition 1 only 655.00 €
Redundant Ethernet (2 ST ports 1300nm Multimode) with Modulated or Un-modulated IRIG-B and IEC 61850 Edition 1 only 765.00 €
Ethernet, 1 RJ45 single port + Modulated/Un-modulated IRIG-B and IEC 61850 Edition 1 or 2, without Cyber Security (** see note) 495.00 € Redundant Ethernet PRP or HSR and Dual IP, 3 RJ45 ports + Modulated/Un-modulated IRIG-B and IEC 61850 Edition 1 or 2, without Cyber Security (** see note)
655.00 €
Redundant Ethernet PRP or HSR and Dual IP, 2 LC Ports + 1 RJ45 port + Modulated/Un-modulated IRIG-B and IEC 61850 Edition 1 or 2, without Cyber Security (** see note)
765.00 €
Ethernet, 1 RJ45 single port + Modulated/Un-modulated IRIG-B and IEC 61850 Edition 1 or 2, without Cyber Security (** see note) 640.00 € Redundant Ethernet PRP or HSR and Dual IP, 3 RJ45 ports + Modulated/Un-modulated IRIG-B and IEC 61850 Edition 1 or 2, without Cyber Security (** see note)
800.00 €
Redundant Ethernet PRP or HSR and Dual IP, 2 LC Ports + 1 RJ45 port + Modulated/Un-modulated IRIG-B and IEC 61850 Edition 1 or 2, without Cyber Security (** see note)
910.00 €
* Note: When the 2nd rear comms option is selected, this board also offers InterMiCOM relay - relay signalling ** Note: Please check avalibility and delivert time before any order in 2015
Transmission line terminal IED, with autoreclosing, check synchronism, breaker fail, fault locator, and directional overcurrent and earth protection. Used as breaker management terminal, Main 2 and/or backup protection. Dual breaker model B, for leader-follower reclose schemes in breaker and a half and other dual CB applications. 24 opto inputs and 32 contacts.
25(x2), 27, 46, 46BC, 49, 50, 50BF, 51, 51N, 51FF, 59, 59N, 67, 67N,
79(x2), 81U/O/R24 opto inputs and 32 contacts. 80TE 5,738.00 €
P841 PLATFORM - default supply M
Product Plaforms M or K (Product options will vary depending on the Hardware platform and the Software Version selected)
Software Options
Default Software Version -
Hardware Options8 HSHB Contacts (delta price for 2 4HSHB boards instead of 2 8DO boards) 333.27 € 12 HSHB Contacts (delta price for 3 4HSHB boards instead of 2 8DO boards) 637.56 € Communications Options
IRIG-B Input (modulated) 183.00 €
Fibre Optic Convertor 210.00 €
IRIG-B Input (modulated) and Fibre Optic Convertor 276.00 €
2nd rear comms without IRIG-B (* see note) 482.00 €
2nd rear comms with modulated IRIG-B (* see note) 668.00 €
Ethernet Single Port (RJ45 and ST) and IEC 61850 Edition 1 only 495.00 €
Ethernet Single Port (RJ45 and ST) with Modulated or Un-modulated IRIG-B and IEC 61850 Edition 1 only 655.00 €
Redundant Ethernet (2 ST ports 1300nm Multimode) with Modulated or Un-modulated IRIG-B and IEC 61850 Edition 1 only 765.00 €
Ethernet, 1 RJ45 single port + Modulated/Un-modulated IRIG-B and IEC 61850 Edition 1 or 2, without Cyber Security (** see note) 495.00 € Redundant Ethernet PRP or HSR and Dual IP, 3 RJ45 ports + Modulated/Un-modulated IRIG-B and IEC 61850 Edition 1 or 2, without Cyber Security (** see note)
655.00 €
Redundant Ethernet PRP or HSR and Dual IP, 2 LC Ports + 1 RJ45 port + Modulated/Un-modulated IRIG-B and IEC 61850 Edition 1 or 2, without Cyber Security (** see note)
765.00 €
Ethernet, 1 RJ45 single port + Modulated/Un-modulated IRIG-B and IEC 61850 Edition 1 or 2, without Cyber Security (** see note) 640.00 € Redundant Ethernet PRP or HSR and Dual IP, 3 RJ45 ports + Modulated/Un-modulated IRIG-B and IEC 61850 Edition 1 or 2, without Cyber Security (** see note)
800.00 €
Redundant Ethernet PRP or HSR and Dual IP, 2 LC Ports + 1 RJ45 port + Modulated/Un-modulated IRIG-B and IEC 61850 Edition 1 or 2, without Cyber Security (** see note)
910.00 €
* Note: When the 2nd rear comms option is selected, this board also offers InterMiCOM relay - relay signalling ** Note: Please check avalibility and delivert time before any order in 2015
Breaker Failure, AUTO RECLOSEP841-A
P841-B
Schneider Electric SA - NRJED113434EN Page 50 of 65
SEPAM, MiCOM and VAMP Price Guide 2015 Section: 05 - MiCOM Px40 series
MiCOM Digital Input & Output Extension device32 opto inputs and 16 output contacts
80TE 1,199.00 €
48 opto inputs and 24 output contacts 1,836.00 €
32 opto inputs and 14 output contacts, 16 high break contacts 2,328.00 €
16 opto inputs and 60 output contacts 1,691.00 €
64 opto inputs and 16 output contacts 2,124.00 €
32 opto inputs and 46 output contacts 1,851.00 €
P849 PLATFORM - default supply K
Product Plaforms K (Product options will vary depending on the Hardware platform and the Software Version selected) Software OptionsDefault Software Version -
Communications Options
IRIG-B Input (modulated) 183.00 € Fibre Optic Convertor 210.00 € IRIG-B Input (modulated) and Fibre Optic Convertor 276.00 €
2nd rear comms without IRIG-B (* see note) 482.00 €
2nd rear comms with modulated IRIG-B (* see note) 668.00 €
Ethernet Single Port (RJ45 and ST) without IEC 61850 294.00 €
Ethernet Single Port (RJ45 and ST) and IEC 61850 Edition 1 only 495.00 €
Ethernet Single Port (RJ45 and ST) with Modulated or Un-modulated IRIG-B without IEC 61850 454.00 €
Ethernet Single Port (RJ45 and ST) with Modulated or Un-modulated IRIG-B and IEC 61850 Edition 1 only 655.00 €
Redundant Ethernet (2 ST ports 1300nm Multimode) with Modulated or Un-modulated IRIG-B and IEC 61850 Edition 1 only 765.00 €
Ethernet, 1 RJ45 single port + Modulated/Un-modulated IRIG-B and IEC 61850 Edition 1 or 2, without Cyber Security (** see note) 495.00 € Redundant Ethernet PRP or HSR and Dual IP, 3 RJ45 ports + Modulated/Un-modulated IRIG-B and IEC 61850 Edition 1 or 2, without Cyber Security (** see note)
655.00 €
Redundant Ethernet PRP or HSR and Dual IP, 2 LC Ports + 1 RJ45 port + Modulated/Un-modulated IRIG-B and IEC 61850 Edition 1 or 2, without Cyber Security (** see note)
765.00 €
Ethernet, 1 RJ45 single port + Modulated/Un-modulated IRIG-B and IEC 61850 Edition 1 or 2, without Cyber Security (** see note) 640.00 € Redundant Ethernet PRP or HSR and Dual IP, 3 RJ45 ports + Modulated/Un-modulated IRIG-B and IEC 61850 Edition 1 or 2, without Cyber Security (** see note)
800.00 €
Redundant Ethernet PRP or HSR and Dual IP, 2 LC Ports + 1 RJ45 port + Modulated/Un-modulated IRIG-B and IEC 61850 Edition 1 or 2, without Cyber Security (** see note)
910.00 €
* Note: When the 2nd rear comms option is selected, this board also offers InterMiCOM relay - relay signalling ** Note: Please check avalibility and delivert time before any order in 2015
I/O Extension Device
See Integrated Feeder Management Section above
P849
AUTO RECLOSE & CHECK SYNCAUTO RECLOSEP142See Integrated Feeder Management Section above
P144See Integrated Feeder Management Section aboveCHECK SYNCHRONISINGP143See Integrated Feeder Management Section above
P145
Schneider Electric SA - NRJED113434EN Page 51 of 65
VAMP
SEPAM, MiCOM and VAMP Price Guide 2015 Section: 06 - VAMP series
VAMP Series
TYPE & DESCRIPTION Type Code PRICE
1/5A nominal current for overcurrent, 1/5 or 0.2/1 A nominal current for earth fault, 40..265 Vac/dc or 18..36 Vdc supply voltage, 2 DI (24 or 110 or 220 Vdc), 6 DO, USB front communication interface
Models
VAMP50 V50 3AAA 1AAA 1,061.00 €
Hardware Options
1x mA output 60.00 €
I/O Card, 4 digital inputs, 1 digital Output 150.00 €
Arc protection: 2 x sensor, BIO (= 1x fast DI (48 V dc max) 150.00 €
Arc protection: 3 x sensor, BIO (= 1x fast DI (+48 Vdc max) and 1x fast DO (+30 Vdc if activ e) 173.00 €
Communications Options Last two digits of order code
RS 232 interface LA 98.00 €
RS 485 interface BA 128.00 €
Plastic/Plastic fibre interface DA 236.00 €
Glass/Glass fibre interface EA 284.00 €
Plastic/Glass fibre interface FA 284.00 €
Glass/Plastic fibre interface GA 284.00 €
Ethernet RJ45 10 Mbps IEC 61850 interface and RS232 LE 218.00 €
Ethernet LC single fibre 100 Mbps IEC 61850 interface and RS232 LG 268.00 €
Ethernet RJ45 10 Mbps IEC 61850 interface and RS485 BE 248.00 €
Ethernet LC single fibre 100 Mbps IEC 61850 interface and RS485 BG 298.00 €
Profibus Interface PA 486.00 €
IRIG-B time synchronisation input and RS232 interface LB 148.00 €
Glass Fibre optic interface for VIO RTD module and RS232 interface LC 173.00 €
IRIG-B time synchronisation input and RS485 interface BB 178.00 €
Glass Fibre optic interface for VIO RTD module and RS485 interface BC 181.00 €
Ethernet RJ45 double 100 Mbps IEC61850 interface SA 316.00 €
Ethernet ST double fibre 100 Mbps IEC 61850 interface *) RA 399.00 €
RS232 interface with ext I/O and IRIG B MA 188.00 €
RS232 interface with ext I/O and RTD interface (glass) MC 218.00 €
Ethernet RJ45 10 Mbps IEC61850 interface and RS232 with ext I/O and IRIG B ME 358.00 €
Ethernet LC single fibre 100 Mbps IEC61850 interface and RS232 with ext I/O and IRIG B MG 388.00 € *) Note: only available with 110Vac/dc or higher power supply
Case Options
Slim case - €
Draw-out case *) 250.00 €
*) Note:Please contact Schneider Electric before order
OVERCURRENTVAMP50 OVERCURRENT & EARTHFAULT WITH AUTORECLOSE
Schneider Electric SA - NRJED113434EN Page 53 of 65
SEPAM, MiCOM and VAMP Price Guide 2015 Section: 06 - VAMP series
1/5A nominal current for overcurrent, 1/5 or 0.2/1 A nominal current for earth fault, 40..265 Vac/dc or 18..36 Vdc supply voltage, 2 DI (24 or 110 or 220 Vdc), 6 DO, USB front communication interface
Models
VAMP59 V59 3AAA 1ALA 2,659.00 €
Hardware Options
1x mA output 60.00 €
I/O Card, 4 digital inputs, 1 digital Output 150.00 €
Arc protection: 2 x sensor, BIO (= 1x fast DI (48 V dc max) 150.00 €
Arc protection: 3 x sensor, BIO (= 1x fast DI (+48 Vdc max) and 1x fast DO (+30 Vdc if activ e) 173.00 €
Communications module 1 Options Last 2 digits of order code
RS232 interface LA 98.00 €
Ethernet RJ45 10 Mbps IEC 61850 interface and RS232 LE 332.00 €
Ethernet LC single fibre 100 Mbps IEC 61850 interface and RS232 LG 396.00 €
IRIG-B time synchronisation input and RS232 interface LB 182.00 €
Glass Fibre optic interface for VIO RTD module and RS232 interface LC 173.00 €
RS232 interface with ext I/O and IRIG B MA 188.00 €
RS232 interface with ext I/O and RTD interface (glass) MC 218.00 €
Ethernet RJ45 10 Mbps IEC61850 interface and RS232 with ext I/O and IRIG B ME 358.00 €
Ethernet LC single fibre 100 Mbps IEC61850 interface and RS232 with ext I/O and IRIG B MG 388.00 €
Cables
RS232 converter cable for MOXA TCF90 VX048 52.00 €
RS232 converter cable for MOXA TCF142 VX062 52.00 €
RS232 converter cable for WESTERMO VX063 52.00 €
AccessoriesMOXA TCF-90-S-ST, RS232 to single mode fiber optic converter. Optic fiber connection ST type. Power supply from relay.
On Request
MOXA TCF-142-S-ST, RS232 to single mode fiber optic converter. Optic fiber connection ST type. Separate power supply needed
On Request
MOXA TCF-90-M-ST, RS232 to multi mode fiber optic converter. Optic fiber connection ST type. Power supply from relay.
On Request
MOXA TCF-142-M-ST, RS232 to multi mode fiber optic converter. Optic fiber connection ST type. Separate power supply needed
On Request
Westermo ODW-720-F1, base unit *) On Request
SLC20, max distance 20km Single mode fiber card, LC connector On Request
SLC40, max distance 40km Single mode fiber card, LC connector On Request
SLC80, max distance 80km Single mode fiber card, LC connector On Request
SLC120, max distance 120km Single mode fiber card, LC connector On Request
*) Note: This unit is allways needed and additional select one of the SLC cards depend on distance needed. Price consist of both unit together, e.g. ODW-710-F1 + SLC20 card
Case Options
Slim case - €
Draw-out case *) 250.00 €
*) Note:Please contact Schneider Electric before order
LINE DIFFERENTIAL VAMP59 Line Differential Relay
Please contact Schneider Electric
Schneider Electric SA - NRJED113434EN Page 54 of 65
SEPAM, MiCOM and VAMP Price Guide 2015 Section: 06 - VAMP series
1/5A nominal current for overcurrent, 0.2/1/5 A nominal current for earth fault, 50-120 V nominal voltage, 19..265Vac/dc supply voltage, RS232 communication interface
Models
VAMP40 VAMP40 720.00 €
VAMP40 accessories
Arc interface module for VAMP40 (including connection cable to relay) VP 40 143.00 €
Optional Seal for IP54 VYX256A 40.00 €
19" rack mounting plate for VAMP 40 VYX 314 71.00 €
1/5A nominal current for overcurrent, 1/5 or 0.2/1 A nominal current for earth fault, 50-120 V nominal voltage, 40..265 Vac/dc or 18..36 Vdc supply voltage, 2 DI (24 or 110 or 220 Vdc), 6 DO, USB front communication interface
Models
VAMP52 V52 3AAA 1AAA 1,145.00 €
Hardware Options
1x mA output 60.00 €
I/O Card, 4 digital inputs, 1 digital Output 150.00 €
Arc protection: 2 x sensor, BIO (= 1x fast DI (48 V dc max) 150.00 €
Arc protection: 3 x sensor, BIO (= 1x fast DI (+48 Vdc max) and 1x fast DO (+30 Vdc if activ e) 173.00 €
Communications Options Last 2 digits of order code
RS 232 interface LA 98.00 €
RS 485 interface BA 128.00 €
Plastic/Plastic fibre interface DA 236.00 €
Glass/Glass fibre interface EA 284.00 €
Plastic/Glass fibre interface FA 284.00 €
Glass/Plastic fibre interface GA 284.00 €
Ethernet RJ45 10 Mbps IEC 61850 interface and RS232 LE 218.00 €
Ethernet LC single fibre 100 Mbps IEC 61850 interface and RS232 LG 268.00 €
Ethernet RJ45 10 Mbps IEC 61850 interface and RS485 BE 248.00 €
Ethernet LC single fibre 100 Mbps IEC 61850 interface and RS485 BG 298.00 €
Profibus Interface PA 486.00 €
IRIG-B time synchronisation input and RS232 interface LB 148.00 €
Glass Fibre optic interface for VIO RTD module and RS232 interface LC 173.00 €
IRIG-B time synchronisation input and RS485 interface BB 178.00 €
Glass Fibre optic interface for VIO RTD module and RS485 interface BC 181.00 €
Ethernet RJ45 double 100 Mbps IEC61850 interface SA 316.00 €
Ethernet ST double fibre 100 Mbps IEC 61850 interface *) RA 399.00 €
RS232 interface with ext I/O and IRIG B MA 188.00 €
RS232 interface with ext I/O and RTD interface (glass) MC 218.00 €
Ethernet RJ45 10 Mbps IEC61850 interface and RS232 with ext I/O and IRIG B ME 358.00 €
Ethernet LC single fibre 100 Mbps IEC61850 interface and RS232 with ext I/O and IRIG B MG 388.00 € *) Note: only available with 110Vac/dc or higher power supply
Case Options
Slim case - €
Draw-out case *) 250.00 €
*) Note:Please contact Schneider Electric before order
FEEDER - MOTOR - CAPACITORVAMP40 Feeder/Motor/Capacitor Protection Relay
VAMP52 FEEDER/MOTOR
Schneider Electric SA - NRJED113434EN Page 55 of 65
SEPAM, MiCOM and VAMP Price Guide 2015 Section: 06 - VAMP series
1/5A nominal current for overcurrent and earth fault, 40..265Vac/dc supply voltage, TTL communication interface
Models
VAMP230 V230 3C7 AAE 2,299.00 €
Integrated Options
Plastic/Plastic fibre interface 224.00 €
Plastic/Glass, Glass/Plastic fibre interface 293.00 €
Glass/Glass - fibre interface 293.00 €
Profibus connection 346.00 €
RS 485 connection 180.00 €
4 pcs mA analogue outputs 150.00 €
IEC 61850 RJ-45 100 Mbps interface 399.00 €
LC 100 Mbps optic interface with IEC61850 446.00 €
2x100Mbps RJ45 interface with IEC61850 551.00 €
2x100Mbps LC optic interface with IEC61850 650.00 €
Product Specific Options
Arc connection 150.00 €
Optional I/O card, DI19 / DI20 150.00 €
IP54 class sealing 42.00 €
1/5A nominal current for overcurrent and earth fault, 40..265Vac/dc supply voltage, TTL communication interface
Models
VAMP255 V255 3C7 AAE 2,677.00 €
Integrated Options
Plastic/Plastic fibre interface 224.00 €
Plastic/Glass, Glass/Plastic fibre interface 293.00 €
Glass/Glass - fibre interface 293.00 €
Profibus connection 346.00 €
RS 485 connection 180.00 €
4 pcs mA analogue outputs 150.00 €
IEC 61850 RJ-45 100 Mbps interface 399.00 €
LC 100 Mbps optic interface with IEC61850 446.00 €
2x100Mbps RJ45 interface with IEC61850 551.00 €
2x100Mbps LC optic interface with IEC61850 650.00 €
Product Specific Options
Arc connection 150.00 €
Optional I/O card, DI19 / DI20 150.00 €
IP54 class sealing 42.00 €
1/5A nominal current for overcurrent and earth fault, 40..265Vac/dc supply voltage, without communication interface
Models
VAMP257 - 18 DIGITAL INPUTS, 9 DIGITAL OUTPUTS V257 3C6 ACA 3,027.00 €
VAMP257 - 26 DIGITAL INPUTS, 14 DIGITAL OUTPUTS V257 3C7 ACA 3,342.00 €
VAMP257 - 18 DIGITAL INPUTS, 20 DIGITAL OUTPUTS V257 3C8 ACA 3,453.00 €
Communications Options
TTL/RS 232 interface 164.00 €
RS 232 interface (RJ45) 164.00 €
Ethernet interface for Modbus/TCP and DNP, RJ 45 252.00 €
Ethernet interface for Modbus/TCP and DNP, fibre (ST connector) 280.00 €
IEC 61850 Interface, RJ 45 369.00 €
IEC 61850 Interface, fibre (ST connector) 400.00 €
RS 485 interface (2-wire) 180.00 €
RS 485 interface (4-wire) 180.00 €
Plastic/Plastic fibre interface 224.00 €
Glass/Glass fibre interface 293.00 €
Glass/Plastic fibre interface 293.00 €
Plastic/Glass fibre interface 293.00 €
Glass fiber interface for RTD module 120.00 €
Product Specific Options
Arc connection 150.00 €
Optional I/O card, DI19 / DI20 150.00 €
IP54 class sealing 42.00 €
VAMP230 FEEDER/MOTOR/CAPACITOR
VAMP255 FEEDER/MOTOR/CAPACITOR
VAMP257 FEEDER/MOTOR
Schneider Electric SA - NRJED113434EN Page 56 of 65
SEPAM, MiCOM and VAMP Price Guide 2015 Section: 06 - VAMP series
VAMP300 IED
Model
F = Feeder 1,711.00 €
M = Motor 1,948.00 €
including:
- Power Supply Voltage C or D
- Analog Measurememt Card A
- Display Type A
Supply Voltage
C = Power C 110 - 240 (80 .. 265Vac/dc, 5 x DO heavy duty, A1, SF)
D = Power D 24 - 48 (18 .. 60Vdc, 5 x DO heavy duty, A1, SF)
I/O card I/II/III/IV
B = 3BIO+2Arc (3 x BI/BO, 2 x Arc point sensor, T2, T3, T4) AVAILABLE FOR SLOT 2 ONLY 288.00 €
C = F2BIO+1Arc (Fibre 2 x BI/BO, 1 x Arc loop sensor, T2, T3, T4) AVAILABLE FOR SLOT 2 ONLY 300.00 €
D = 2IGBT (2 x IGBT High speed outputs) AVAILABLE FOR SLOT 5 ONLY 168.00 €
G = 6DI+4DO (6 x DI, 4 x DO) AVAILABLE FOR SLOT 2, 3, 4, 5 210.00 €
I = 10DI (10 x DI) AVAILABLE FOR SLOT 2, 3, 4, 5 185.00 €
Option card I
D = 4Arc (4 x Arc sensor) AVAILABLE FOR SLOT 6, 7 168.00 €
P = PP (Plastic / Plastic serial fibre) AVAILABLE FOR SLOT 6, 7 293.00 €
R = GG (Glass / Glass serial fibre) AVAILABLE FOR SLOT 6, 7 293.00 €
Analog measurement card
A = 3L+U+Io (5/1A) 50.00 €
B = 3L+4U+Io (5/1A) 150.00 €
C = 3L+4U+2Io (5+1A) 200.00 €
D = 3L+4U+2Io (1+0.2A) 200.00 €
Communication interface I
B = RS232 (RS232, IRIG-B) AVAILABLE FOR SLOT 9, 10 178.00 €
C = RS232+RJ (RS232, IRIG-B + Ethernet RJ-45 100 Mbs) AVAILABLE FOR SLOT 9 ONLY 274.00 €
D = RS232+LC (RS232, IRIG-B + Ethernet LC 100 Mbs) AVAILABLE FOR SLOT 9 ONLY 322.00 €
N = 2xRJ (Ethernet RJ 100 Mbs, RSTP) AVAILABLE FOR SLOT 9 ONLY 516.00 €
O = 2xLC (Ethernet LC 100 Mbs, RSTP) AVAILABLE FOR SLOT 9 ONLY 612.00 €
Display Type
A = 128 x 64 (128 x 64 LCD matrix) - €
B = 128 x 128 (128 x128 LCD matrix) - €
C = 128 x 128Ext (128 x 128 LCD matrix, detachable) 50.00 €
Line Manager
Line Manager with distance and differential protection, 1/5A nominal current for overcurrent and earth fault, 40..265Vac/dc supply voltage, without communication interface
Models
VAMP259 - 18 DIGITAL INPUTS, 9 DIGITAL OUTPUTS VAMP259 4C6 ACA 4,485.00 €
VAMP259 - 26 DIGITAL INPUTS, 14 DIGITAL OUTPUTS VAMP259 4C7 ACA 4,785.00 €
VAMP259 - 18 DIGITAL INPUTS, 20 DIGITAL OUTPUTS VAMP259 4C8 ACA 4,889.00 €
Communications Options
TTL/RS 232 interface 164.00 €
RS 232 interface (RJ45) 164.00 €
Ethernet interface for Modbus/TCP and DNP, RJ 45 252.00 €
Ethernet interface for Modbus/TCP and DNP, fibre (ST connector) 280.00 €
IEC 61850 Interface, RJ 45 369.00 €
IEC 61850 Interface, fibre (ST connector) 400.00 €
RS 485 interface (2-wire) 180.00 €
RS 485 interface (4-wire) 180.00 €
Plastic/Plastic fibre interface 224.00 €
Glass/Glass fibre interface 293.00 €
Glass/Plastic fibre interface 293.00 €
Plastic/Glass fibre interface 293.00 €
Glass fiber interface for RTD module 120.00 €
Product Specific Options
Arc connection 150.00 €
Optional I/O card, DI19 / DI20 150.00 €
IP54 class sealing 42.00 €
VAMP 300 FEEDER/MOTOR
VAMP259 Line Manager
Schneider Electric SA - NRJED113434EN Page 57 of 65
SEPAM, MiCOM and VAMP Price Guide 2015 Section: 06 - VAMP series
Differential Protection
1A/1A nominal current for HV/LV and 5A/5A nominal current for earth fault, 40..265Vac/dc supply voltage, TTL communication interface.
Models
VAMP265 - Differential Protection VAMP265 1A7 AAE 2,685.00 €
VAMP265 - Motor Differential Proection VAMP265 1A7 AAM 3,223.00 €
Integrated Options
Plastic/Plastic fibre interface 224.00 €
Plastic/Glass, Glass/Plastic fibre interface 293.00 €
Glass/Glass - fibre interface 293.00 €
Profibus connection 346.00 €
RS 485 connection 180.00 €
4 pcs mA analogue outputs 150.00 €
IEC 61850 RJ-45 100 Mbps interface 399.00 €
LC 100 Mbps optic interface with IEC61850 446.00 €
2x100Mbps RJ45 interface with IEC61850 551.00 €
2x100Mbps LC optic interface with IEC61850 650.00 €
Product Specific Options
Arc connection 150.00 €
Optional I/O card, DI19 / DI20 150.00 €
IP54 class sealing 42.00 €
Generator Protection
1A nominal current for overcurrent and 5A/5A nominal current for earth fault, 40..265Vac/dc supply voltage, TTL communication interface.
Models
VAMP210 - Generator Protection VAMP210 1A7 AAE 3,525.00 €
Integrated Options
Plastic/Plastic fibre interface 224.00 €
Plastic/Glass, Glass/Plastic fibre interface 293.00 €
Glass/Glass - fibre interface 293.00 €
Profibus connection 346.00 €
RS 485 connection 180.00 €
4 pcs mA analogue outputs 150.00 €
IEC 61850 RJ-45 100 Mbps interface 399.00 €
LC 100 Mbps optic interface with IEC61850 446.00 €
2x100Mbps RJ45 interface with IEC61850 551.00 €
2x100Mbps LC optic interface with IEC61850 650.00 €
Product Specific Options
Arc connection 150.00 €
Optional I/O card, DI19 / DI20 150.00 €
IP54 class sealing 42.00 €
VAMP210 Generator protection
VAMP265 Differential protection
Schneider Electric SA - NRJED113434EN Page 58 of 65
SEPAM, MiCOM and VAMP Price Guide 2015 Section: 06 - VAMP series
50-120 V nominal voltage, 40..265 Vac/dc or 18..36 Vdc supply voltage, 2 DI (24 or 110 or 220 Vdc), 6 DO, USB front communication interface
Models
VAMP55 V55 3AAA 1AAA 1,181.00 €
Hardware Options
1mA output 60.00 €
IO Card, 4 digital inputs, 1 digital Output 150.00 €
Communications Options Last two digits of order codeRS 232 interface LA 98.00 €
RS 485 interface BA 128.00 €
Plastic/Plastic fibre interface DA 236.00 €
Glass/Glass fibre interface EA 284.00 €
Plastic/Glass fibre interface FA 284.00 € Glass/Plastic fibre interface GA 284.00 € Ethernet RJ45 10 Mbps IEC 61850 interface and RS232 LE 218.00 € Ethernet LC single fibre 100 Mbps IEC 61850 interface and RS232 LG 268.00 € Ethernet RJ45 10 Mbps IEC 61850 interface and RS485 BE 248.00 € Ethernet LC single fibre 100 Mbps IEC 61850 interface and RS485 BG 298.00 € Profibus Interface PA 486.00 € IRIG-B time synchronisation input and RS232 interface LB 148.00 € Glass Fibre optic interface for VIO RTD module and RS232 interface LC 173.00 € IRIG-B time synchronisation input and RS485 interface BB 178.00 € Glass Fibre optic interface for VIO RTD module and RS485 interface BC 181.00 € Ethernet RJ45 double 100 Mbps IEC61850 interface SA 316.00 € Ethernet ST double fibre 100 Mbps IEC 61850 interface *) RA 399.00 € RS232 interface with ext I/O and IRIG B MA 188.00 € RS232 interface with ext I/O and RTD interface (glass) MC 218.00 € Ethernet RJ45 10 Mbps IEC61850 interface and RS232 with ext I/O and IRIG B ME 358.00 € Ethernet LC single fibre 100 Mbps IEC61850 interface and RS232 with ext I/O and IRIG B MG 388.00 € *) Note: only available with 110Vac/dc or higher power supply
Case Options
Slim case - €
VAMP 11V IED
Model options
Model LVoltage and neutral displacement protection with under/ over voltage. 0BI/4BO
27, 59, 59N, 86 406.00 €
Model NVoltage and neutral displacement protection with under/ over voltage. 2BI/6BO; RS485 (Modbus/IEC103); USB 27, 59, 59N, 86
520.00 €
Model AVoltage and frequency protection with under/ over voltage, under/over frequency; 4BI/8BO; RS485 (Modbus/IEC103); USB 27, 27D, 47, 59, 59N, 81U, 81O
651.00 €
Accessories delicated for Vamp 11V
Wall mounting case adaptor 42.00 €
Front cover preventing from unauthorised access 61.00 €
VOLTAGE-FREQUENCYVAMP55 VOLTAGE/FREQUENCY
Vamp 11V - Voltage/Frequency Protection
Schneider Electric SA - NRJED113434EN Page 59 of 65
SEPAM, MiCOM and VAMP Price Guide 2015 Section: 06 - VAMP series
Accessories & Cables *
Flush mounting, 200 series, 40mm VYX076 38.00 €
Flush mounting, 200 series, 60mm VYX077 38.00 €
Flush mounting, 200 series, 100mm VYX233 46.00 €
Flush mounting, 321 / 300 series, 45 mm VYX695 38.00 € Wall mounting frame for 50 series V50WAF 132.00 € Wall mounting frame for 200 series V200 WAF 112.00 €
RS 232 programming cable VX003-3 56.00 €
USB programming cable for VAMP 50-series VX052-3 30.00 € TTL/RS232 Converter Cable (for REMOTE port - (VPA 3 CG (Profibus) or VMA 3CG (RS-485))) VX007-F3 90.00 €
RS232 (option A) converter cable for MOXA TCF90 (remote port) VX048 52.00 €
Interface cable to VPA3CG for VAMP50 series VX054 52.00 €
RJ45 (option I) converter cable for MOXA TCF-90 (extension port) VX055 52.00 €
RJ45 (option I) converter cable for MOXA TCF-142-S-ST (extension port) VX056 52.00 €
USB-RS232 adapter 3P025 65.00 €
Profibus converter module (needs VX007-F3 cable) VPA 3 CG 256.00 €
Alarm panel (16 LEDs), only for VAMP 230/255 VAM 16D 256.00 €
12-channel external RTD input module, glass fiber interface to relay, 19-265 Vac/dc power supply VIO 12 AA 526.00 €
12-channel external RTD input module, RS 485 interface to relay, 19-265 Vac/dc power supply
VIO 12 AB 494.00 €
12-channel external RTD input module, 4mA inputs, PTC input, glass fiber interface to relay, 24 Vdc power supply VIO 12 AC 750.00 €
12-channel external RTD input module, 4mA inputs, PTC input, glass fiber interface to relay, 40-265Vac/dc power supply
VIO 12 AD 721.00 €
*) Note: not for Vamp 11V
ACCESSORIES
VIO EXTERNAL IO UNITS
FRAMES
CABLES
Schneider Electric SA - NRJED113434EN Page 60 of 65
SEPAM, MiCOM and VAMP Price Guide 2015 Section: 07 - VAMP ARC
VAMP ARC Protection
TYPE & DESCRIPTION ANSI Type Code PRICE
19-265 Vdc / 40-265 Vac auxiliary supply, 4 arc sensor channels, 2 digital inputs, 2 trip contacts, 1 trip alarm contact, 1 trip signal (NC) and IRF contactModels
VAMP120 V120 459.00 €
Hardware Options
Installation kit for flush mounting VYX 293 36.00 €
VAMP 121 unitModelsVAMP121 V121 514.00 € VAMP121D V121D 542.00 € Hardware Options (only one option can be selected)- Phoenix MINI PS, or equilavent power unit 3P004 111.00 €
- Phoenix DEK REL alarm relay 3P007 25.00 €
VAMP 221 Central Unit
Models
VAMP 221 V221 3A3 AAA 2,188.00 €
VAMP 221 V221 4A3 AAA 2,360.00 €
Hardware Options (I/O unit)I/O unit for central unit, connection for 10 sensors and one pinch sensor. 3 trip contacts for selective tripping
VAM 12LSE 1,080.00 €
I/O unit for central unit, connection for 10 sensors and one pinch sensor VAM 10LSE 518.00 €
I/O unit for central unit, 3 fiber optic connections and one pinch sensor VAM 3LSE 534.00 €
I/O unit for central unit, 3 fiber optic connections and one pinch sensor, adjustable light sensitivity
VAM 3LXSE 621.00 €
I/O unit for central unit, 3 phase current measurement or 2 phase current + residual current measurement, 1 / 5 A
VAM 4CSE 710.00 €
Hardware Options (DOOR MOUNTED I/O)I/O unit for central unit, 3 phase current measurement or 2 phase current + residual current measurement, 1 / 5 A
VAM 4CDSE 739.00 €
I/O unit for central unit, connection for 10 sensors and one pinch sensor. 3 trip contacts for selective tripping
VAM 12LDSE 1,108.00 €
I/O unit for central unit, connection for 10 sensors and one pinch sensor VAM 10LDSE 548.00 €
ARC PROTECTIONVAMP120
VAMP121
VAMP221 CENTRAL UNIT
Schneider Electric SA - NRJED113434EN Page 61 of 65
SEPAM, MiCOM and VAMP Price Guide 2015 Section: 07 - VAMP ARC
VAMP321 CENTRAL UNIT
Models
VAMP 321 V321 - xAAAA AAAAA Ax 1,987.00 €
including:
- Power Supply Voltage A or B
- Analog Measurememt Card A
- Display Type A
Supply Voltage
A = Power A 110 - 240 (80 .. 265Vac/dc, T1, A1, SF) - €
B = Power B 24 - 48 (18 .. 60Vdc, T1, A1, SF) - €
I/O card I/II/III/IV
B = 3BIO+2Arc (3 x BI/BO, 2 x Arc point sensor, T2, T3, T4) AVAILABLE FOR SLOT 2 ONLY 288.00 €
C = F2BIO+1Arc (Fibre 2 x BI/BO, 1 x Arc loop sensor, T2, T3, T4) AVAILABLE FOR SLOT 2 ONLY 300.00 €
D = 2IGBT (2 x IGBT High speed outputs) AVAILABLE FOR SLOT 5 ONLY 168.00 €
G = 6DI+4DO (6 x DI, 4 x DO) AVAILABLE FOR SLOT 2, 3, 4, 5 210.00 €
I = 10DI (10 x DI) AVAILABLE FOR SLOT 2, 3, 4, 5 185.00 €
I/O Option card I/II
D = 4Arc (4 x Arc sensor) AVAILABLE FOR SLOT 6, 7 168.00 €
Communication interface I/II
B = RS232 (RS232, IRIG-B) AVAILABLE FOR SLOT 9, 10 178.00 €
C = RS232+RJ (RS232, IRIG-B + Ethernet RJ-45 100 Mbs) AVAILABLE FOR SLOT 9 ONLY 274.00 €
D = RS232+LC (RS232, IRIG-B + Ethernet LC 100 Mbs) AVAILABLE FOR SLOT 9 ONLY 322.00 €
N = 2xRJ (Ethernet RJ 100 Mbs, RSTP) AVAILABLE FOR SLOT 9 ONLY 516.00 €
O = 2xLC (Ethernet LC 100 Mbs, RSTP) AVAILABLE FOR SLOT 9 ONLY 612.00 €
Display Type
A = 128 x 64 (128 x 64 LCD matrix) - €
B = 128 x 128 (128 x128 LCD matrix) - €
C = 128 x 128Ext (128 x 128 LCD matrix, detachable) 50.00 €
Hardware Options (I/O unit)I/O unit for central unit, connection for 10 sensors and one pinch sensor. 3 trip contacts for selective tripping
VAM 12LSE 1,080.00 €
I/O unit for central unit, connection for 10 sensors and one pinch sensor VAM 10LSE 518.00 €
I/O unit for central unit, 3 fiber optic connections and one pinch sensor VAM 3LSE 534.00 €
I/O unit for central unit, 3 fiber optic connections and one pinch sensor, adjustable light sensitivity
VAM 3LXSE 621.00 €
I/O unit for central unit, 3 phase current measurement or 2 phase current + residual current measurement, 1 / 5 A
VAM 4CSE 710.00 €
Hardware Options (DOOR MOUNTED I/O)I/O unit for central unit, 3 phase current measurement or 2 phase current + residual current measurement, 1 / 5 A
VAM 4CDSE 739.00 €
I/O unit for central unit, connection for 10 sensors and one pinch sensor. 3 trip contacts for selective tripping
VAM 12LDSE 1,108.00 €
I/O unit for central unit, connection for 10 sensors and one pinch sensor VAM 10LDSE 548.00 €
VAMP321 CENTRAL UNIT
Schneider Electric SA - NRJED113434EN Page 62 of 65
SEPAM, MiCOM and VAMP Price Guide 2015 Section: 07 - VAMP ARC
Arc sensor with 6m connection cable VA 1 DA-6 62.00 €
Arc sensor with 6m connection cable, halogen free VA 1 DA6-HF 80.00 €
Arc sensor with 6m shielded connection cable VA 1 DA-6 74.00 €
Arc sensor with 20m connection cable VA 1 DA-20 71.00 €
Arc sensor with 20m connection cable, halogen free VA 1 DA20-HF 125.00 €
Arc sensor with 20m shielded connection cable VA 1 DA-20S 85.00 €
Pipe type Arc sensor with 6m connection cable VA 1 EH-6 111.00 €
Pipe type Arc sensor with 20m connection cable VA 1 EH-20 125.00 €
Pinch sensor VA 1 DP-5SE 125.00 €
Door connected pinch sensor (requires VX031-5 cable) VA 1 DP-5DSE 162.00 €
Cable for door connected duplexing pinch sensor (from VAM to door). VX031-5 66.00 €
Mounting plate for sensor, Z-shape VYX001 7.00 €
Mounting plate for sensor, L-shape VYX002 7.00 €
Fiber loop sensor, 1m ARC SLm-1 105.00 €
Fiber loop sensor, 5m ARC SLm-5 179.00 €
Fiber loop sensor, 10m ARC SLm-10 193.00 €
Fiber loop sensor, 15m ARC SLm-15 237.00 €
Fiber loop sensor, 20m ARC SLm-20 284.00 €
Fiber loop sensor, 25m ARC SLm-25 298.00 €
Fiber loop sensor, 30m ARC SLm-30 307.00 €
Fiber loop sensor, 35m ARC SLm-35 331.00 €
Fiber loop sensor, 40m ARC SLm-40 355.00 €
Fiber loop sensor, 45m ARC SLm-45 379.00 € Fiber loop sensor, 50m ARC SLm-50 403.00 € Fiber loop sensor, 60m ARC SLm-60 447.00 € Fiber loop sensor, 70m ARC SLm-70 507.00 € Fiber joint (only applicable for ARC SLm type of fiber) SLS-1 73.00 € Connection cable for slaves, length 1 - 9 m (available lengths 1,2,3,5,7 m) VX001-x 37.00 €
Connection cable for slaves, length 10 - 19 m (available lengths 10 m) VX001-x 52.00 €
Connection cable for slaves, length 20 - 30 m (available lengths 20, 30 m) VX001-x 73.00 €
Trip multiplier 4xNO and 4xNC VAMP 4RSE 369.00 €
SENSORS, CABLES AND TRIP RELAY EXTENSION UNITS
FIBRE SENSORS >8000 LUX ACTIVATION
Schneider Electric SA - NRJED113434EN Page 63 of 65