PRICE LIST DECEMBER 2007 - Cyclad Buildingscycladbuildings.com.au/data/eltrack.pdfELTRAK INTERNATIONAL & STAFF PTY LTD 28-32 Morgan Street, Wingfield 5013, South Australia, Australia

Sliding Door SystemsELTRAK® PRODUCT PRICE GUIDE - DOMESTIC / EXPORT EDITION © DECEMBER 2007

PRICE LIST DECEMBER 2007


All weights in shown kilograms and approximate only • Subject to change without notice • Broken Pack & Long Length Surcharge may applyE&OE © 2001 - 2007 Eltrak International & Staff Pty Ltd • Eltrak® Registered Trade Mark of Eltrak International & Staff Pty Ltd, Wingfield, South Australia

ELTRAK INTERNATIONAL & STAFF PTY LTD 28-32 Morgan Street, Wingfield 5013, South Australia, Australia. Telephone (61 8) 8268 3511 Facsimile (61 8) 8445 7470

Prices effective 15th DECEMBER 2007 and do not include GST

EG2 Door Track Galvanised 13.30 metre 60 0.880/metre n/aEG3 Floor Guide Galvanised 14.70 metre 60 0.990/metre n/aED5 Bottom Door Guide Pin 6.40 each 120 0.048 6.50EG7 2 Wheel Nylon Carriage 30.10 each 100 0.124 13.50EG12 4 Wheel Steel Carriage 29.15 each 100 0.222 23.00EG14LP 4 Wheel Nylon Carriage 34.60 each 80 0.236 20.00EG18 Bracket - Weld On Single 3.85 each 150 0.082 13.50EG19 Bracket - Bolt On Single 4.70 each 150 0.080 13.00EG20 Bracket - Single Side Fix 6.65 each 100 0.150 16.00EG22 Bracket - Double O/Head 75mm 9.80 each 60 0.188 12.00EG22A Bracket - Double O/Head 65 mm 10.45 each 60 0.276 17.50EG23 Bracket - Angle Support 5.70 each 150 0.056 9.50ED37 Top Plate & Adjusting Nut 10.00 each 100 0.072 8.00EC40 Track Stop 8.10 each 150 0.048 16.00EG39 Bottom Door Guide 2.90 each 200 0.009 3.00EG40 Double Floor Guide Plate 5.70 each 60 0.075 5.50EG64 Bracket - Double Support 6.05 each 60 0.172 11.50EG64BS Bolt Set 2.10 each 120 0.024 4.00EG68 Bracket - Double Side Fix 16.60 each 50 0.374 19.50EC FGP Nylon Floor Guide Pad 13.30 each 40 0.178 8.00 GAR1/35 Bracket - Side Fix 35mm Step 4.70 each 100 0.178 19.00

GRADUATE 120 SERIES Light Duty Domestic Doors to 120 kg

ED2 Door Track Galvanised 15.45 metre 60 1.265/metre n/aED3 Single Floor Guide Galvanised 18.55 metre 60 1.375/metre n/aED4 Double Floor Guide Galvanised 75mm 35.75 metre 30 2.640/metre n/aED4/65 Double Floor Guide Galvanised 65mm 35.75 metre 30 2.640/metre n/aED FGP Floor Guide Plate Only 2.10 each 50 0.111 6.50EC FGP Nylon Floor Guide Pad 13.30 each 40 0.178 8.00ED5 Bottom Door Guide Pin 6.40 each 120 0.048 6.75EC6 Nylon Guide Pads 9.70 pair 80 0.004 1.50EDJB Track Joining Bracket 9.50 each 60 0.250 16.00ED7/ED7LP 2 Wheel Nylon Carriage 33.00 each 100 0.152 16.00ED7M Tautliner Bracket Attachment 4.10 each 200 0.023 5.50ED12 4 Wheel Steel Carriage 32.65 each 80 0.302 25.00 ED12LP 4 Wheel Steel Carriage 33.65 each 80 0.314 26.00ED14LP 4 Wheel Nylon Carriage 42.05 each 80 0.274 23.00ED19 Bracket - Bolt On Single 4.70 each 140 0.146 21.50ED19BS Bolt Set 2.10 each 140 0.022 4.00ED120 Bracket - Single Side Fix Adaptor 2.35 each 140 0.076 11.30ED20A Bracket - Single Side Fix - 25mm 11.60 each 60 0.294 18.50ED20B Bracket - Single Side Fix - 35mm 11.60 each 60 0.294 18.50ED20C Bracket - Single Side Fix - 44mm 12.30 each 50 0.344 18.00ED21 Bracket - Two Piece 7.60 each 100 0.166 17.50ED22A Bracket - Double Overhead 65mm 15.60 each 30 0.406 13.00ED22B Bracket - Double Overhead 75mm 15.60 each 30 0.406 13.00ED22C Bracket - Double Overhead 90mm 16.15 each 30 0.406 13.00ED23 Bracket - Single Support 6.50 each 80 0.138 12.00ED24 Bracket - Double Support Extended 21.50 each 30 0.432 14.00ED25 Bracket - Double Support 20.20 each 30 0.382 12.50ED26 Bracket - Cavity Fix 8.30 each 80 0.246 20.50ED27 Bracket - Double Support 9.00 each 60 0.246 16.00ED30 Track End Stop 2.20 each 200 0.022 5.50ED37 Top Plate & Adjusting Nut 10.00 each 100 0.072 8.20EC40 Track Stop 8.10 each 150 0.112 16.00EC50 Bracket - Flashing Support 6.40 each 60 0.186 12.00ED64 Bracket - Angle Support 7.60 each 60 0.305 19.50ED64C Bracket - Angle Support Extended 8.10 each 60 0.350 22.00ED68 Bracket - Double Side Fix 65mm 18.90 each 30 0.524 16.50ED68B Bracket - Double Side Fix 75mm 18.90 each 30 0.524 16.50

DIRECTOR 200 SERIES Light Industrial Doors to 200 kg

CODE DESCRIPTION LIST $ UNIT PACK ITEM Wt PACK Wt

CODE DESCRIPTION LIST $ UNIT PACK ITEM Wt PACK Wt

EDLK Door Lock Kit Light Duty 44.75 each 10 0.488 6.00EDLKT Door Lock Kit Tee Handle Light Duty 49.20 each 10 0.820 9.00 ETH Tee Handle Locking Front Fix 32.15 each 30 0.290 10.00 ETHK Tee Handle Locking Kit 25.10 each 30 0.212 5.00 ELH Internal Latch Handle 9.00 each 60 0.132 9.00 EGL Flush Mount Grille Lock 46.55 each 20 0.300 10.00

DOOR LOCKS CODE DESCRIPTION LIST $ UNIT PACK ITEM Wt PACK Wt





EM1 Door Track Galvanised 26.20 metre 40 2.473/metre n/aEH3 Single Floor Guide Galvanised 30.40 metre 40 2.476/metre n/aEH4 Double Floor Guide Galvanised 58.20 metre 20 4.953/metre n/aEH FGP Floor Guide Plate Only 3.20 each 50 0.098 6.00EC FGP Nylon Floor Guide Pad 13.30 each 40 0.172 8.00EH5 Bottom Door Guide Pin 12.25 each 80 0.158 13.50EC6 Nylon Guide Pads 9.70 pair 80 0.008 1.50EHJB Track Joining Bracket 16.15 each 40 0.322 14.00EH7 2 Wheel Nylon Carriage 42.90 each 50 0.356 19.00EH12LP 4 Wheel Steel Carriage 65.30 each 30 0.706 22.00EH12ST 5 Wheel Steel Carriage 75.65 each 30 0.764 24.00 EH13LP 4 Wheel Nylon Carriage 76.25 each 20 0.680 14.50EH14LP 4 Wheel Nylon Carriage 88.40 each 20 0.738 15.50EH19 Bracket - Bolt On Single 6.85 each 50 0.238 13.00EH19BS Bolt Set 3.40 each 200 0.078 16.50EH120 Adaptor - Single Side Fix - Flush 2.40 each 100 0.128 14.00EH20C Bracket - Single Side Fix - 43mm 15.95 each 20 0.614 13.00EH21 Bracket - Two Piece 9.40 each 40 0.228 10.00EH22 Bracket - Double Support 95mm 18.90 each 30 0.788 24.00EH23 Bracket - Single Support 8.60 each 50 0.362 19.00EH23C Bracket - Single Support Extended 8.60 each 50 0.378 20.00EH24 Bracket - Double Support 28.50 each 20 0.668 14.00EH26 Bracket - Cavity Fix 10.45 each 40 0.374 16.00 EH27B Bracket - Double Support 13.20 each 50 0.370 14.50EH30 Track End Stop 2.60 each 200 0.032 7.50EM36 Barn Door Apron Set 54.60 each 30 1.055 32.50EM37 Top Plate & Adjusting Nut 10.70 each 100 0.130 14.00EC40 Track Stop 8.10 each 150 0.106 16.00EH44 Bracket - Double Support 23.90 each 25 0.480 13.00EC50 Bracket - Flashing Support 6.40 each 60 0.190 12.50

MATADOR 450 SERIES Medium Industrial Doors to 450 kgCODE DESCRIPTION LIST $ UNIT PACK ITEM Wt PACK Wt

EH1 Door Track Galvanised 28.60 metre 40 2.532/metre n/aEH3 Single Floor Guide Galvanised 30.40 metre 40 2.476/metre n/aEH4 Double Floor Guide Galvanised 58.20 metre 20 4.953/metre n/aEH FGP Floor Guide Plate Only 3.20 each 50 0.098 6.00EC FGP Nylon Floor Guide Pad 13.30 each 40 0.172 8.00EH5 Bottom Door Guide Pin 12.25 each 80 0.158 13.50EC6 Nylon Guide Pads 9.70 pair 80 0.008 1.50EHJB Track Joining Bracket 16.15 each 40 0.322 14.00EH15ST 5 Wheel Steel Carriage 93.10 each 30 0.824 25.50EH16ST 5 Wheel Steel Carriage 128.80 each 20 1.100 23.00EH19 Bracket - Bolt On Single 6.85 each 50 0.238 13.00EH19BS Bolt Set 3.40 each 200 0.078 16.50EH120 Adaptor - Single Side Fix - Flush 2.40 each 100 0.128 14.00EH20C Bracket - Single Side Fix - 43mm 15.95 each 20 0.614 13.00EH21 Bracket - Two Piece 9.40 each 40 0.228 10.00EH22 Bracket - Double Support 95mm 18.90 each 30 0.788 24.00EH23 Bracket - Single Support 8.60 each 50 0.362 19.00EH23C Bracket - Single Support Extended 8.60 each 50 0.378 20.00EH24 Bracket - Double Support 28.50 each 20 0.668 14.00EH26 Bracket - Cavity Fix 10.45 each 40 0.374 16.00 EH27B Bracket - Double Support 13.20 each 50 0.370 19.50EH30 Track End Stop 2.60 each 200 0.032 7.50EH36 Barn Door Apron Set 54.60 each 30 1.055 32.50EH37 Top Plate & Adjusting Nut 11.80 each 100 0.128 14.00EC40 Track Stop 8.10 each 150 0.106 16.00EH44 Bracket - Double Support 23.90 each 25 0.480 13.00EC50 Bracket - Flashing Support 6.40 each 60 0.190 12.50

HERCULES 650 SERIES Heavy Industrial Doors to 650 kgCODE DESCRIPTION LIST $ UNIT PACK ITEM Wt PACK Wt

EF4 Door Frame Perimeter 12.40 metre 40 1.922/mtr n/a EB2 Door Frame Backing Rail 11.20 metre 40 1.536/mtr n/a

DOOR FRAMING CODE DESCRIPTION LIST $ UNIT PACK ITEM Wt PACK Wt





ED2 Door Track Galvanised 15.45 metre 60 1.265/metre n/aED2 600R Door Track Curved Section 116.40 each 20 1.526 n/a EFC15 6.5M Floor Guide Channel Aluminium 96.70 each 60 2.412 n/a EFC15 600R Floor Guide - Curved Section 66.25 each 20 0.502 n/a EDJB Track Joining Bracket 9.50 each 60 0.250 16.00ED7LP 2 Wheel Nylon Carriage 33.00 each 100 0.144 15.50 ED7CB 2 Wheel Carriage/Centre Bracket 44.45 each 50 0.214 11.50 ED7EB 2 Wheel Carriage/End Bracket 44.45 each 50 0.252 13.50 ED7DH 2 Wheel Carriage/Double Hinge 44.45 each 50 0.324 17.00ED7SH 2 Wheel Carriage/Single Hinge 37.35 each 50 0.256 14.00 ED14S 4 Wheel Nylon Carriage 41.25 each 80 0.268 22.50ED14CB 4 Wheel Carriage/Centre Bracket 52.10 each 50 0.324 17.00ED14EB 4 Wheel Carriage/End Bracket 52.10 each 50 0.374 19.50ED14DH 4 Wheel Carriage/Double Hinge 52.10 each 50 0.450 23.50ED14SH 4 Wheel Carriage/Single Hinge 46.90 each 50 0.396 21.00ED62 Double Hinge Assembly 21.50 each 50 0.216 12.00ED6RBCB Roller Guide/Centre Bracket 33.30 each 100 0.090 10.00ED6RBEB Roller Guide/End Bracket 33.30 each 100 0.140 15.00ED6RBDH Roller Guide/Double Hinge 33.30 each 50 0.280 15.00ED6RBSH Roller Guide/Single Hinge 29.80 each 50 0.218 12.00ED19 Bracket - Bolt On Single 4.70 each 140 0.146 21.50ED19BS Bolt Set 2.10 each 140 0.020 4.00ED120 Bracket - Single Side Fix Adaptor 2.35 each 80 0.076 11.30ED23 Bracket - Single Support 6.50 each 80 0.138 12.00ED26 Bracket - Cavity Fix 8.30 each 80 0.246 20.50ED30 Track End Stop 2.20 each 200 0.022 5.50EC40 Track Stop 8.10 each 150 0.112 16.00EBH7050FP Butt Hinge - Fixed Pin 70 x 50 5.05 pair 50 0.409 21.00

BIFOLD & ROUND CORNER LIGHT DUTY SERIES CODE DESCRIPTION LIST $ UNIT PACK ITEM Wt PACK Wt

EM1 Door Track Galvanised 26.20 metre 40 2.473/metre n/aEH1 600R Door Track Curved Section 144.10 each 20 2.792 n/a EFC20 6.5M Floor Guide Channel Aluminium 140.50 each 40 3.633 n/a EFC20 600R Floor Guide - Curved Section 94.00 each 20 0.716 n/a EHJB Track Joining Bracket 16.15 each 40 0.322 14.00 EH7 2 Wheel Nylon Carriage 42.90 each 50 0.356 19.00 EH7CB 2 Wheel Carriage/Centre Bracket 53.70 each 20 0.478 10.50 EH7EB 2 Wheel Carriage/End Bracket 53.70 each 20 0.576 12.50 EH7DH 2 Wheel Carriage/Double Hinge 53.70 each 20 0.604 13.00EH7SH 2 Wheel Carriage/Single Hinge 48.40 each 20 0.530 11.50 EH14M 4 Wheel Nylon Carriage 89.25 each 20 0.636 13.50EH14CB 4 Wheel Carriage/Centre Bracket 99.25 each 20 0.780 16.50EH14EB 4 Wheel Carriage/End Bracket 99.25 each 20 0.858 18.00EH14DH 4 Wheel Carriage/Double Hinge 99.25 each 20 0.856 18.00EH14SH 4 Wheel Carriage/Single Hinge 94.00 each 20 0.762 16.00EH62 Double Hinge Assembly 26.90 each 40 0.314 14.00EH6RBCB Roller Guide/Centre Bracket 38.95 each 80 0.162 14.00EH6RBEB Roller Guide/End Bracket 38.95 each 80 0.262 22.00EH6RBDH Roller Guide/Double Hinge 38.95 each 40 0.430 18.00EH6RBSH Roller Guide/Single Hinge 35.30 each 40 0.350 15.00EH19 Bracket - Bolt On Single 6.85 each 50 0.238 13.00EH19BS Bolt Set 3.40 each 200 0.078 16.50EH120 Adaptor - Single Side Fix 2.40 each 100 0.128 14.00EH23 Bracket - Single Support 8.60 each 50 0.362 19.00EH26 Bracket - Cavity Fix 10.45 each 40 0.374 16.00EH30 Track End Stop 2.60 each 200 0.032 7.50EC40 Track Stop 8.10 each 150 0.106 16.00EBH10075LP Butt Hinge - Loose Pin 100x75 7.00 pair 50 0.409 21.50

BIFOLD & ROUND CORNER HEAVY DUTY SERIES CODE DESCRIPTION LIST $ UNIT PACK ITEM Wt PACK Wt

EHD Door Handle Heavy Duty 12.60 each 30 0.186 6.50 ELD Door Handle Light Duty 14.30 each 30 0.156 5.50 EHS Hasp & Staple Lock 20.55 each 30 0.428 14.00 EPB100 Pad Bolt Lock Standard 100mm 4.65 each 50 0.104 6.00 EPB150 Pad Bolt Lock Long Shoot 150mm 12.10 each 30 0.358 11.50 EDB400 Lockable Drop Bolt 405mm 9.80 each 40 0.556 23.00 EC FGA Floor Guide Angle 6.0 metre 107.45 each n/a 13.000 n/aEC FGAM Floor Guide Angle per metre 22.20 metre n/a 2.166 n/a

DOOR ACCESSORIES CODE DESCRIPTION LIST $ UNIT PACK ITEM Wt PACK Wt

1. GENERAL All goods purchased from Eltrak International & Staff Pty Ltd (the company) are sold subject to the following terms and conditions and comprise the whole contract between the company and the buyer (the customer). These terms and conditions prevail to the exclusion of all terms and conditions whether express or implied except those terms and conditions implied by law.

2. PRICES All prices are subject to alteration without notice. Prices set out or referred to in the company’s price lists are applicable to all orders received on or after the stated effective date of the then current price lists unless otherwise stated in writing by the company.

3. ORDERS Any order placed by the customer is deemed to be an order incorporating these terms and conditions of sale notwithstanding any inconsistency with the customer’s order unless expressly agreed to in writing by the company. Mail and facsimile orders will be treated as new orders unless clearly marked “confirmation”. Any duplication or variances relating to mail and facsimile orders not marked “confirmation” are the customer’s responsibility.

4. DELIVERY Goods delivered to store or depot within the company’s nominated delivery area for the Adelaide metropolitan area will incur a freight charge. Delivery outside this area will incur an additional freight charge at the discretion of and as nominated by the company. Freight Surcharges A surcharge applies at the discretion of the company to small orders (any order of less than AU$100.00 net or such other amount as the company may nominate from time to time). A surcharge also applies for long orders (any order of door tracks and framing material of longer than 7.20m or such other length as the company may nominate from time to time). Goods Damaged in Transit The company is not responsible for loss of or damage to goods in transit except when the goods are carried in the company’s own vehicles or by contractors retained by the company to deliver such goods. If that occurs the company must be notified immediately on the receipt of the goods of the nature and extent of any damage. Any goods must be returned in accordance with clause 6. A copy of the freight note relating to the damaged goods must be forwarded to the company identifying the damaged goods which will be matched with a copy of the freight note obtained from the transport company. This procedure is a standard requirement of the company’s insurer.

5. PAYMENT The company reserves the right to require payment before delivery, or satisfactory evidence of the ability of the customer to pay for the goods ordered. If credit is approved payment for goods must be received by the company within 25 days from the end of the month of invoice. Invoice date is the date of dispatch of goods. The company may at its discretion disallow discount on any overdue account whether or not the company has waived the right to disallow discount on any prior overdue account. Freight Charges Where delivery charges are debited to the customer’s account the charges are payable by the customer as part of the costs of the goods to which the delivery relates. Interest The customer must pay interest on any overdue payment at a rate equivalent to the Indicator Lending Rate of the company’s bankers plus 4% calculated daily from the date when payment was due pursuant to this clause until the date of actual payment. Collection Expenses The customer must pay any expenses whether legal or otherwise incurred by the company in recovering or attempting to recover any overdue amount from the customer.

6. RETURN OF GOODS Goods may only be returned as follows a) If the goods are being returned for credit due to either over-ordering or incorrect ordering the goods will be returnable only at the discretion of the company and at the customer’s cost and provided that the goods are returned within 14 days of the delivery date. A minimum restocking fee of 20% of the invoice value of the goods will apply to such goods should they be accepted by the company. Receipt of any goods returned without the consent of the company does not constitute acceptance of those goods by the company.

b) If the goods are being returned as a result of any error by the company or any defect in the goods or as a result of damage during transit for which the company accepts responsibility pursuant to clause 4 then subject to any law the goods must be returned within 14 days of the delivery date and with prior notification in writing to the company of the reason for the return of the goods. The cartnote number and the invoice number of the goods must be supplied to the company at the time of notification. Goods returned after 14 days from the delivery date may only be returned with the consent of the company. Receipt of any goods returned without the consent of the company does not constitute acceptance of those goods by the company or the acceptance of any error by the company or defect in the goods. Transport of Goods Returned for Credit The customer must return goods by transport of their choice and at their cost unless otherwise agreed by the company. Condition of Returned Goods Credit will only be given for goods returned if the goods are received by the company in the same condition as at the time of dispatch. Assessment of the condition of the goods is strictly at the company’s discretion.

7. EXCLUSIONS OF LIABILITY a) The company accepts no responsibility for loss or damage in transit except where the carriage of the goods is by means of the company’s own vehicles or by contractors retained by the company for delivery of goods.

b) The company accepts no responsibility for damage in transit of sliding door tracks or framing sections where the quantity despatched consists of less than ten (10) lengths. c) The company is not liable for any loss or damage to goods after delivery by the company.

d) Any delivery times quoted are estimates only and the company is not liable for any failure or delay in the delivery of the goods.

e) Unless expressly stated in writing by the company the provisions & tolerances contained in the standard specification to which the goods are manufactured by the company or its suppliers will apply to all orders.

f) Every care is taken to provide correct product specifications and details in the company’s Instruction Manuals but the company makes no warranty that the published Instruction Manuals contain no errors or omissions. To the extent permitted by law, the company excludes all liability which could arise from errors or omissions in the company’s Instruction Manuals.

g) The exclusions contained in this section are subject to any obligation imposed by law.

8. CONSEQUENTIAL LOSS EXCLUDED The company is not liable for any consequential loss suffered by the customer as a result of any negligence or error by the company in connection with the supply of or condition of or defect or damage to goods supplied by the company to the customer and any claim by the customer for loss or damage is limited to the net invoice price of the goods in respect of which the error or defect or damage occurred.

9. RETENTION OF TITLE a) The customer hereby acknowledges that property in the goods remains with the company until the customer has made payment in full for the goods except that the customer is entitled to sell the goods in the ordinary course of its business.

b) In the event that the customer defaults in payment for the goods the customer hereby consents to the company and its employees or agents entering into the customer’s premises or any other premises where the goods are stored for the purpose of taking possession of the goods and for this purpose the customer must grant all reasonable access to the company and its servants or agents and the customer hereby agrees to indemnify and keep indemnified the company in respect of any liability which the company may incur as a result of exercising its rights pursuant to this clause.

c) If the customer sells or otherwise disposes of the goods to a third party prior to making payment of the purchase price the customer holds in trust the proceeds of any such sale for the company.

10. RISK Notwithstanding anything herein contained the goods are at the risk of the customer from the time of delivery.

11. EXCLUSION OF WARRANTIES All Elgate products are designed and manufactured for use as fence or gate fittings. All Eltrak products are designed and manufactured for use as industrial sliding door equipment. Except as expressly provided for herein and subject to any obligation imposed by law, liability for use of the company’s products for any purpose other than for which the products are designed is excluded.

12. SEVERANCE If any part of this Agreement is or becomes void or invalid that part must be severed and the Agreement will continue in force and be interpreted as if it did not include that part.

13. ASSIGNMENT a) The customer must not assign any of its rights or obligations under this Agreement. b) The company may assign to any person any debt owed by the customer to the company under this Agreement. If the company’s business is acquired by another entity this Agreement will thereupon be novated to that entity without any further action by any party.

14. TERMINATION This Agreement may be terminated by the company at any time.

15. CUSTOMER’S WARRANTIES AND ACKNOWLEDGMENTS a) The customer acknowledges that all information supplied by the customer in relation to this Agreement will be relied upon by the company for the purpose of accepting any order placed by the customer and the customer hereby warrants that all information supplied by the customer in relation to this Agreement or any application for credit is accurate and will at the time that any order is placed continue to be accurate.

b) If there is any change in the circumstances of the customer or any person who has guaranteed the performance of the customer which would be material to a decision by the company as to whether to grant or extend credit to the customer the customer must immediately notify the company of any such change.

16. JURISDICTION This Agreement is deemed to be made at the office of the company at 28-32 Morgan Street, Wingfield South Australia 5013 and any legal action taken for enforcement or recovery of monies may be commenced in the appropriate Court in the State of South Australia.

TERMS AND CONDITIONS OF SALE:


Eltrak International & Staff Pty Ltd28-32 Morgan Street, Wingfield, 5013 South Australia, Australia.Telephone: +61 8 8268 3511Facsimile: +61 8 8445 7470Email: [email protected]: www.eltrak.com.au

DISTRIBUTED BY:


G R O U P O F C O M P A N I E S

BN36 Roller Guide Nylon 36dia x 32mm 7.45 each 50 0.129 6.50CN30 Roller Guide Nylon 30dia x 40mm 14.50 each 50 0.144 7.20CN40 Roller Guide Nylon 40dia x 60mm 15.50 each 20 0.383 7.75CR20 Adjustable Weld On Hinge Flat M20 44.50 each 20 0.425 8.50CR24 Adjustable Weld On Hinge Flat M24 55.90 each 10 0.720 7.20CR30 Adjustable Hinge to be Welded M20 46.60 each 20 0.535 10.75CR35 Adjustable Hinge to be Welded M24 49.70 each 10 0.770 7.75CR40 Adjustable Hinge to be Welded M30 51.80 each 10 1.360 13.75PR20 Adjustable Hinge Plate M20 33.10 each 20 0.425 8.70PR24 Adjustable Hinge Plate M24 44.50 each 10 0.700 7.10822PSV Bottom Roller 80dia x 22mm V Welded Supp. 200 kg 36.20 each 12 0.983 12.00830PO Bottom Roller 80dia x 30mm U Outer Supp. 250 kg 36.20 each 12 0.992 12.00926PSO Bottom Roller 90dia x 26mm U Welded Supp. 220 kg 38.30 each 12 1.160 14.001026PSO Bottom Roller 100dia x 26mm U Welded Supp. 260 kg 46.60 each 10 1.397 14.001227PSO Bottom Roller 120dia x 27mm U Welded Supp. 350 kg 58.00 each 6 2.295 14.00830O Bottom Roller Only 80dia x 30mm U 250 kg 35.20 each 12 0.908 11.001230O Bottom Roller Only 120dia x 30mm U 350 kg 55.90 each 8 2.225 18.001230PO Bottom Roller 120dia x 30mm U Outer Supp. 350 kg 55.90 each 6 2.583 15.501030PCO Bottom Roller 100dia x 30mm O Closed Supp. 300 kg 46.60 each 8 1.875 15.1063 Nylon Slotted Rack with Spacer 20 x 30 x 1 metre 32.00 each - 0.454 n/aACRV4 Nylon Gate Rack 1 metre 32.00 each - 0.450 n/aWTS Travel Stop for Sliding Gates Weld On 15.50 each 10 0.600 6.00FMTS Travel Stop for Sliding Gates Floor Mount 24.30 each 10 0.934 10.34TJZ Omega Joining Pin 100 x 13mm 4.45 each 20 0.100 2.00NIG Nylon Incline Guide Block 53.80 each 10 0.510 6.00OMEGAZ3 In Ground Roller Track 20dia 60 x 60 x 3.0 metre 124.00 3.0 mtr - 13.00 n/aOMEGAZ5.8 In Ground Roller Track 20dia 60 x 60 x 5.8 metre 238.00 5.8 mtr - 25.50 n/aFLOORZ3 Above Ground Roller Track 20dia 55 x 16 x 3.0 metre 76.50 3.0 mtr - 5.30 n/aFLOORZ5.8 Above Ground Roller Track 20dia 55 x 16 x 5.8 metre 148.00 5.8 mtr - 10.25 n/a

BOTTOM SLIDING DOOR & GATE HARDWARE CODE DESCRIPTION LIST $ UNIT PACK ITEM Wt PACK Wt

BOTTOM SLIDING DOOR & GATE HARDWARE

Documents

PRICE LIST DECEMBER 2007 - Cyclad Buildingscycladbuildings.com.au/data/eltrack.pdfELTRAK INTERNATIONAL & STAFF PTY LTD 28-32 Morgan Street, Wingfield 5013, South Australia, Australia