PRICE LIST E6 - aliaxis-ui.ataliaxis-ui.at/wp-content/uploads/2017/05/E6.15-PVDF-Pipes-Fittings... · page 13 page 15 page 16 page 18 page 19 page 20 ... • DVS 2207-15 Welding of

PRICE LIST E6.15PVDF PIPE, FITTINGS AND VALVES

2

Since 1954 FIP produces injection moulded valves and fittings in thermopla-stic materials for pressure pipeline systems thus becoming nowadays the lar-gest European valves manufacturer. FIP is a company of the Aliaxis Group: a worldwide industrial holding, ga-thering together a series of companies manufacturing and marketing plastic plumbing products for building, industrial and public utilities applications. FIP products are manufactured on EU production sites, operating to the Quality Assurance System in compliance with ISO 9001 and with the Environmental Management System ISO 14001 standards requirements.Moulded in FIP products there are over 50 years of know-how powered by a strong quest for innovation.

Company Certificates

Cert. N° 1 in compliance with the Standard UNI EN ISO 9001

Cert. N° 70 in compliance with the Standard UNI EN ISO 14001

CE Conformity

CE conformity according to European directives EC/2104/68.

R00-02-2017

Product managerPVC-U Manual & Actuated valves - Lucia Cambiaso Tel. +39 010 9621 266

PVC-C Manual & Actuated valves - Mauro Nobile Tel. +39 010 9621 414

PP-H & PVDF Manual & Actuated valves- Silvia Porcile Tel. +39 010 9621 267

Variable area flowmeters - Alberto Claveri Tel. +39 010 9621 340

PVC-U & PVC-C fittings - Mauro Nobile Tel. +39 010 9621 414

PE, PP-H & PVDF fittings - Silvia Porcile Tel. +39 010 9621 267

PP Compression fittings MAGNUM System& Clamp saddles - Stefano Carrea Tel. +39 010 9621 255

Technical Support [email protected]

3

PVDF PIPE,

FITTINGS AND VALVES

INDEXGeneral info

How to read FIP Valves Commercial CodesHow to read FIP Fittings Commercial CodesReference standardsApprovals and quality marks

page 4page 6page 8page 9

ISO-UNI PIPE

Pressure pipe page 11

ISO-UNI FITTINGS

Fittings for socket welding - Equal socketFittings for socket welding - CapFittings for socket welding - UnionsFittings for socket welding - ReducersFittings for socket welding - StubsFlanges - ISO-DIN seriesFlanges - ANSI series

page 13page 15page 16page 18page 19page 20page 21

ISO-BSP FITTINGS

Adaptor for socket welding - UnionsAdaptor for socket welding - SS A316L Union Ends

page 23page 24

BALL VALVES

VKD DN 10÷50 - DUAL BLOCK® 2-way ball valveVKD DN 65÷100 - DUAL BLOCK® 2-way ball valveVKR DN 10÷50 - DUAL BLOCK® regulating ball valveSR DN 15÷50 - Ball check valve

page 25page 30page 34page 38

BUTTERFLY VALVE

FK DN 40÷400 - Butterfly valve page 40

DIAPHRAGM VALVE

DK DN 15÷65 - DIALOCK® 2-way diaphragm valveVM DN 80÷100 - Diaphragm valveCM DN 12÷15 - Compact diaphragm valve

page 48page 53page 56

CONNECTIONS

Connections for ball valvesSpare end connectors for true union diaphragm valves

page 60page 64

Packaging InformationConditions of supply

page 65page 66

4

FKVALVE MODEL

OCONNECTION STD.

CMATERIALS

VKD ball 2-way DUAL BLOCK® I ISO socket (metric) A ABS

TKD ball 3-way DUAL BLOCK® T D ISO spigot (metric) C PVC-C

LKD portball 3-way DUAL BLOCK® L B ISO butt welding (metric) F PVDF

VKR regulating ball 2-way DUAL BLOCK® BE PE100 ISO butt welding (metric) M PP-H

VXE ball 2-way Easyfit G JIS socket threaded (metric) V PVC-U

VEE ball 2-way Easyfit P Hose adaptor (metric) T PVC-U Transparent

SXE ball spring check valve Easyfit F BSP female threaded (inch)

FK butterfly multi-purpose R BSP male threaded (inch)

FE butterfly water L BS female (inch)

DK diaphragm DIALOCK” M BS male (inch)

VM diaphragm A ASTM socket (inch)

CM compact diaphragm Y ASTM spigot (inch)

CMU unionised compact diaphragm N NPT socket threaded (inch)

DKD direct acting diaphragm (only pneumatically actuated) J JIS socket (inch)

DKDU unionised direct acting diaphragm (only pneumatically actuated) O ISO-DIN flanged (metric)

DKM diaphragm act. diaphragm OA ANSI 150 flanged (inch)

DKP piston act. diaphragm (only pneumatically actuated) OL LUG ISO-DIN (mm) flanged

DKPU unionised piston actuator diaphragm (only pneumatically actuated) OAL LUG ANSI 150 (inch) flanged

RM diaphragm cock

RP piston cock

RV strainer

RVU unionised strainer

VR piston check valve

VRU unionised piston check valve

VV angle seat valve

VVU unionised angle seat valve

SR ball check valve

VZ foot valve

VA air release valve

SV pressure relief valve

CR wafer check valve

Ex: FKOCRM315F FK butterfly valve, PVC-C disc, gear box, d 315, FPM gasket

CODESHOW TO READ FIP VALVES COMMERCIAL CODES

5

RMCOMMAND SYSTEM

315 SIZE

FSEAL

MATERIALMETRIC SERIES d (mm) INCH SERIES d/R (inches)SHX handle block (for VKD ball valves) 006 6 E EPDM

LM lever (for butterfly) 008 8 F FPM

RM gear box (for butterfly) 010 10 N NBR

FM bare shaft (for butterfly) 012 12 014 1/4” P PTFE

NC Pneumatic Normally Closed 016 16 038 3/8”

NO Pneumatic Normally Open 020 20 012 1/2”

DA Pneumatic Double Acting 025 25 034 3/4”

SA Pneumatic Single Acting 032 32 100 1”

EA Electric 230V AC 040 40 114 1” 1/4

EB Electric 115V AC 050 50 112 1” 1/2

EE Electric 24V AC 063 63 200 2”

EF Electric 24V DC 214 2” 1/4

EI Electric 400V three phase 075 75 212 2” 1/2

EM Electric 90-240V AC 234 2” 3/4

EL Electric 24V AC/DC 090 90 300 3”

110 110 400 4”

125 125

140 140 500 5”

160 160 600 6”

180 180

200 200

225 225 800 8”

250 250

280 280 810 10”

315 315 812 12”

355 355 814 14”

400 400 816 16”

6

BTYPE OF FITTINGS

IJOINT SYSTEM

VMATERIALS

A Hose connector C Blind C PVC-C

B Socket union F BSP female threaded (inch) E PE

C End cap G JIS socket threaded (inch) F PVDF

D Reducer bush I ISO socket (metric) M PP-H

E Nut M BS male (inch) V PVC-U

F Fixed flange P Hose adaptor (metric) B PP-steel

F/B Union bush R BSP male threaded (inch) O Brass

G 90° elbow B ISO butt welding (metric)

H 45° elbow D ISO spigot (metric)

J Back nut A ASTM socket (inch)

K Transition fitting

L Tank connector

M Socket

N Nipple

NR Reduced nipple

O Free flange

P Plug

Q Collars

Q/B Union end connector

R Reduction

S 90° bend

T 90° tee

TR 90° tee with reduced offtake

U Clamp saddles

Z Pipe clips

Y 45° tee

X Cross

Ex: BIV050E PVC-U union, d50, socket for solvent welding, EPDM gasket

HOW TO READ FIP FITTINGS COMMERCIAL CODESCODES

7

050 SIZE

ESEAL MATERIAL

METRIC SERIES d (mm) INCH SERIES d/R (inches)006 6 E EPDM

008 8 F FPM

010 10 N NBR

012 12 014 1/4” P PTFE

016 16 038 3/8”

020 20 012 1/2”

025 25 034 3/4”

032 32 100 1”

040 40 114 1” 1/4

050 50 112 1” 1/2

063 63 200 2”

214 2” 1/4

075 75 212 2” 1/2

234 2” 3/4

090 90 300 3”

110 110 400 4”

125 125

140 140 500 5”

160 160 600 6”

180 180

200 200

225 225 800 8”

250 250

280 280 810 10”

315 315 812 12”

355 355

400 400

REFERENCE

Production of the PVDF Solef® lines is carried out according to the highest quality standards and in full compliance with the environmental restrictions set by the applicable laws in force and in accordance with ISO 14001. All products are made in accordance with the quality guarantee system in compliance with ISO 9001.

• ANSI B16.5 Pipe flanges and stubs - NPS 1/2 to NPS 24 mm/inch.• ASTM D3222 PVDF, material for extrusion moulding and coating. • DIN 2501 Flanges, dimensions• DIN 16962 PVDF fittings for socket and butt welding, dimensions.• DIN 16963 Pipe joints and pipe components for pressurised fluids in HDPE.• DVS 2202-1 Imperfections of PVDF welded joints, characteristics, descriptions and

evaluations.• DVS 2207-15 Welding of components in PVDF.• DVS 2208-1 Machinery and equipment for thermocouple welding.• EN 558-1 Industrial valves - Overall dimensions of metal valves for use in flanged

pipe systems - Part 1: PN designated valves.• EN 1092-1 Flanges and their joints - Circular flanges for pipes, valves and accessories

- Part 1: Steel flanges, PN designated.• EN ISO 10931 Specifications for components (Pipes, Fittings and Valves) in PVDF for

industrial applications.• ISO 5211 Part-turn actuator couplings.• ISO 7005-1 Metal flanges; part 1: steel flanges.

STANDARDS

8

APPROVALS AND

• DVGW KTW, W270 Suitability of the SOLVAY PVDF Solef® resin for microbiological tests

• FDA (Food and Drug Administration - USA) Suitability of the SOLVAY PVDF Solef® resin for contact with food

• NSF (National Sanitation Foundation USA) Suitability of the SOLVAY PVDF Solef® resin for use in contact with drink-

ing water

• DIBt FIP PVDF Solef® valves have been tested and certified by DIBt (Deutsches

Institut für Bautechnik)

• GOST-R - EAC PVDF Solef® valves and fittings are GOST-R and EAC certified in accord-

ance with Russian regulations on Safety, Hygiene and Quality

• TA-Luft FIP PVDF Solef® valves have been tested and certified according to “TA-

Luft” by MPA Stuttgart in compliance with the Technical Instruction on Air Quality Control TA-Luft/ VDI 2440

• UKR SEPRO PVDF Solef® valves and fittings are certified in accordance with Ukraine

regulations on Safety, Hygiene and Quality

• WRAS (Water regulations advisory scheme - UK) Suitability of the SOLVAY PVDF Solef® resin for use in contact with drink-

ing water

QUALITY MARKS

9

E6

.15

10

Technical specificationsSize range d 16 ÷ d 110 (mm)Nominal pressure SDR 21 (PN16) with water at 20° C

SDR 33 (PN10) with water at 20° CTemperature range -40 °C ÷ 140 °CCoupling standards Welding: EN ISO 10931.

Can be coupled to pipes according to EN ISO 10931

Reference standards Construction criteria: EN ISO 10931Test methods and requirements: EN ISO 10931Installation criteria: DVS 2201-1, DVS 2207-15, DVS 2208-1

Material PVDF

PIPE

Pressure pipes for connection system by butt or socket welding.

PRESSURE PIPE

ISO-UNI

11

PVDFPRESSURE PIPE

E6

.15

ISO-UNI PIPE

PRESSURE PIPEPVDF Pipe according to ISO 10931-2, translucent white, std length 5m

d DN S (mm) kg/m PN16 code SDR 21 - S10 € pack n./

boxbox

type16 10 1,9 0,137 PIPEF21016 15,87 - - -

20 15 1,9 0,21 PIPEF21020 23,75 - - -

25 20 1,9 0,269 PIPEF21025 30,61 - - -

32 25 2,4 0,435 PIPEF21032 49,85 - - -

40 32 2,4 0,553 PIPEF21040 62,44 - - -

50 40 3 0,825 PIPEF21050 96,56 - - -

63 50 3 1,09 PIPEF21063 123,62 - - -

75 65 3,6 1,55 PIPEF21075 175,89 - - -

90 80 4,3 2,22 PIPEF21090 251,8 - - -

110 100 5,3 3,33 PIPEF21110 376,56 - - -

d DN S (mm) kg/m PN10 code SDR 33 - S16 € pack n./

boxbox

type63 50 2,5 0,93 PIPEF33063 82,34 - - -

75 65 2,5 1,11 PIPEF33075 88,44 - - -

90 80 2,8 1,48 PIPEF33090 117,16 - - -

110 100 3,4 2,20 PIPEF33110 166,82 - - -

12

Technical specificationsSize range d 16 ÷ d 110 (mm)Nominal pressure PN 16 with water at 20° CTemperature range -40 °C ÷ 140 °CCoupling standards Welding: EN ISO 10931.


Flanging system: ISO 7005-1, EN ISO 10931, EN 558-1, DIN 2501, ANSI B.16.5 cl. 150


Fitting material PVDFSeal material FPM

Series of fittings designed forconveying fluids under pressure with a hot weld connection system (socket welding).

FITTINGS

FITTINGS FOR SOCKET WELDING, METRIC SERIES

ISO-UNI

13

PVDFFITTINGS FOR SOCKET WELDING - EQUAL SOCKET

E6

.15

ISO-UNI FITTINGS

GIFElbow 90° for socket welding

d PN Code € pack n./ box

box type

16 16 GIF016 4,72 10 240 04

20 16 GIF020 5,41 10 240 04

25 16 GIF025 6,69 10 160 04

32 16 GIF032 13,91 10 100 04

40 16 GIF040 22,34 5 50 04

50 16 GIF050 33,15 5 30 04

63 16 GIF063 56,18 2 30 03

75 16 GIF075 96,39 2 8 04

90 16 GIF090 142,86 2 6 04

110 16 GIF110 262,61 2 4 04

TIFEqual Tee 90° for socket welding


box type

16 16 TIF016 8,98 10 300 04

20 16 TIF020 9,46 10 160 04

25 16 TIF025 11,60 10 100 04

32 16 TIF032 17,24 10 60 04

40 16 TIF040 26,82 5 40 04

50 16 TIF050 40,92 5 20 04

63 16 TIF063 64,29 2 20 03

75 16 TIF075 121,64 2 8 03

90 16 TIF090 183,47 2 4 04

110 16 TIF110 336,72 2 4 03

14

PVDFFITTINGS FOR SOCKET WELDING - EQUAL SOCKET

ISO-UNI FITTINGS

HIFElbow 45° for socket welding


box type

20 16 HIF020 6,37 10 300 04

25 16 HIF025 9,30 10 160 04

32 16 HIF032 10,89 10 100 04

40 16 HIF040 18,29 5 60 04

50 16 HIF050 20,29 5 30 04

63 16 HIF063 32,75 5 15 04

75 16 HIF075 81,29 2 8 04

90 16 HIF090 123,55 2 6 04

110 16 HIF110 220,11 2 6 03

MIFDouble socket, plain socket for socket welding


box type

20 16 MIF020 3,90 10 300 04

25 16 MIF025 4,63 10 240 04

32 16 MIF032 6,27 10 120 04

40 16 MIF040 9,46 5 90 04

50 16 MIF050 27,90 5 60 04

63 16 MIF063 40,12 2 32 04

75 16 MIF075 42,20 2 24 04

90 16 MIF090 65,26 2 12 04

110 16 MIF110 120,68 2 8 04

15

PVDF

E6

.15

FITTINGS FOR SOCKET WELDING - CAP

ISO-UNI FITTINGS

CIFEnd Cap for socket welding


box type

*16 16 CIF016 5,95 10 1000 04

20 16 CIF020 6,69 10 300 04

25 16 CIF025 7,32 10 240 04

32 16 CIF032 8,42 10 120 04

40 16 CIF040 16,06 5 90 04

50 16 CIF050 18,92 5 90 04

63 16 CIF063 30,51 5 30 04

*75 16 CIF075 32,03 2 24 04

*90 16 CIF090 39,66 2 12 04

*110 16 CIF110 58,25 2 8 04

*Resale product

16

ISO-UNI FITTINGSPVDFFITTINGS FOR SOCKET WELDING - UNIONS

BIGFSocket union with plain end for socket welding, FPM O-ring

d R1 PN FPM code € pack n./

boxbox

type20 1" 16 BIGF020F 17,18 10 80 04

25 1"1/4 16 BIGF025F 23,16 10 60 04

32 1"1/2 16 BIGF032F 28,12 10 40 04

40 2" 16 BIGF040F 40,12 2 24 04

50 2"1/4 16 BIGF050F 55,86 2 24 04

63 2"3/4 16 BIGF063F 84,39 2 12 04

EFGFPVDF Union nut with BS parallel threads for BIGF, BIFXF and BIRXF unions

R d BIGF Code € pack n./ box

box type

1" 20 EFGF100 9,67 - - -

1"1/4 25 EFGF114 13,20 - - -

1"1/2 32 EFGF112 16,37 - - -

2" 40 EFGF200 22,52 - - -

2"1/4 52 EFGF214 32,84 - - -

2"3/4 63 EFGF234 51,03 - - -

17

E6

.15

ISO-UNI FITTINGSPVDF

FITTINGS FOR SOCKET WELDING - UNIONS

Q/BIGFPVDF Union end for socket welding


box type

20 16 QBIGF020 5,89 - - -

25 16 QBIGF025 7,59 - - -

32 16 QBIGF032 8,47 - - -

40 16 QBIGF040 10,81 - - -

50 16 QBIGF050 12,30 - - -

63 16 QBIGF063 17,06 - - -

F/BIGFPVDF Union bush for socket welding

d R1 PN Code € pack n./ box

box type

20 1" 16 FBIGF020 8,72 - - -

25 1"1/4 16 FBIGF025 11,40 - - -

32 1"1/2 16 FBIGF032 12,54 - - -

40 2" 16 FBIGF040 16,15 - - -

50 2"1/4 16 FBIGF050 21,79 - - -

63 2"3/4 16 FBIGF063 34,15 - - -

18

FITTINGS FOR SOCKET WELDING - REDUCERS


RIFReducer: male spigot for socket welding (d) and reduced female socket for socket welding (d[5:1] )

d x d1 PN Code € pack n./ box

box type

25 x 20 16 RIF025020 6,60 10 400 04

32 x 25 16 RIF032025 8,86 10 160 04

40 x 25 16 RIF040025 10,82 10 200 04

40 x 32 16 RIF040032 12,24 10 150 04

50 x 32 16 RIF050032 13,17 5 60 04

50 x 40 16 RIF050040 15,41 5 60 04

63 x 32 16 RIF063032 18,51 5 40 04

63 x 50 16 RIF063050 19,64 5 40 04

75 x 63 16 RIF075063 40,92 2 38 04

90 x 63 16 RIF090063 44,58 2 20 04

90 x 75 16 RIF090075 44,58 2 28 03

110 x 90 16 RIF110090 67,31 2 6 04

19

FITTINGS FOR SOCKET WELDING - STUBS

E6

.15


QRNFStub Flange DIN for socket welding

d DN PN Code € pack n./ box

box type

20 15 16 QRNF020 6,12 10 400 04

25 20 16 QRNF025 7,71 10 120 04

32 25 16 QRNF032 7,85 10 100 04

40 32 16 QRNF040 13,06 5 140 04

50 40 16 QRNF050 15,42 5 100 03

63 50 16 QRNF063 23,54 2 30 04

75 65 16 QRNF075 45,24 2 24 04

90 80 16 QRNF090 61,75 2 12 04

110 110 16 QRNF110 80,27 2 12 04

QRAFStub flange for socket welding for OAB ANSI B16.5 cl.150 backing rings (for other dimensions, use QRNF)

d DN OAB size PN Code € pack n./ box

box type

25 20 3/4" 16 QRAF034 9,24 10 120 04

32 25 1" 16 QRAF100 7,85 10 100 04

40 32 1"1/4 16 QRAF114 15,65 5 70 04

50 40 1"1/2 16 QRAF112 18,52 5 100 03

90 80 3" 16 QRAF300 96,32 - 12 04

20

PVDFFLANGES - ISO-DIN SERIES

ISO-UNI FITTINGS

ODBBacking ring in PP/FRP black with steel core according to EN/ISO/DIN to be used with stub flange QRNM. Drilled: PN 16 up to DN 100

d DN *PMA (bar) Code € pack n./ box

box type

20 15 16 ODB020 See EB price list - - -







**90 80 16 ODB090 See EB price list - - -

***125 100 16 ODB125 See EB price list - - -

*PMA: maximum allowable pressure**to be used with FIP stub flange QRNF090***to be used with FIP stub flange QRNF110

ODBCBacking ring in PP/FRP black with steel core according to EN/ISO/DIN to be used with stub flange QRNM. Drilled: PN16 up to DN 100

d DN *PMA (bar) Code € pack n./ box

box type

20 15 16 ODBC020 See EB price list - - -









*PMA: maximum allowable pressure

21

PVDF

E6

.15

FLANGES - ANSI SERIES

ISO-UNI FITTINGS

OABBacking ring ANSI B16.5 cl.150 in PP/FRP with steel core for stub flange QRAF

d (inch) DN *PMA (bar) Code € pack n./ box

box type

1/2" 15 16 OAB012 See EB price list - - -

3/4" 20 16 OAB034 See EB price list - - -

1" 25 16 OAB100 See EB price list - - -

1"1/4 32 16 OAB114 See EB price list - - -







OABCBlind flange ANSI B16.5 cl.150 in PP/FRP grey with steel core

d (inch) DN *PMA (bar) Code € pack n./ box

box type

1/2" 15 16 OABC012 See EB price list - - -

3/4" 20 16 OABC034 See EB price list - - -

1" 25 16 OABC100 See EB price list - - -

1"1/4 32 16 OABC114 See EB price list - - -







22

Technical specificationsSize range d 20 ÷ 63 (mm); R 3/8” ÷ 2”Nominal pressure PN 16 with water at 20° CTemperature range -40 °C ÷ 140 °CCoupling standards Welding: EN ISO 10931.

Can be coupled to pipes according to EN ISO 10931Thread: ISO 228-1, DIN 2999


Valve material PVDFSeal material FPM

Series of fittings designed for conveyingfluids under pressure with a hot thread and weld connection system (socket welding).

FITTINGS

ADAPTOR FOR SOCKET WELDING

ISO-BSP

23

PVDF

E6

.15

ADAPTOR FOR SOCKET WELDING - UNIONS

ISO-BSP FITTINGS

BIFXFSocket union, one PVDF socket for socket welding, the other Stainless Steel A316L BS parallel female threaded, with FPM O-Ring

d x R R1 PN FPM code € pack n./

boxbox

type20 x 1/2" 1" 16 BIFXF020012F 77,80 40 80 05

25 x 3/4" 1"1/4 16 BIFXF025034F 115,15 16 32 05

32 x 1" 1"1/2 16 BIFXF032100F 141,94 14 28 05

40 x 1"1/4 2" 16 BIFXF040114F 193,52 - - -

50 x 1"1/2 2"1/4 16 BIFXF050112F 206,81 4 8 05

63 x 2" 2"3/4 16 BIFXF063200F 240,61 - - -

BIRXFSocket union, one PVDF socket for socket welding, the other Stainless Steel A316L BS parallel male threaded, with FPM O-Ring

d x R R1 PN FPM code € pack n./

boxbox

type20 x 1/2" 1" 16 BIRXF020012F 87,55 35 70 05

25 x 3/4" 1"1/4 16 BIRXF025034F 128,38 15 30 05

32 x 1" 1"1/2 16 BIRXF032100F 162,84 12 24 05

40 x 1"1/4 2" 16 BIRXF040114F 237,42 - - -

50 x 1"1/2 2"1/4 16 BIRXF050112F 242,02 - - -

63 x 2" 2"3/4 16 BIRXF063200F 279,53 - 10 05

24

PVDFISO-BSP FITTINGS

Q/BFXStainless Steel A316L Union end: BS parallel threaded socket

R Code € pack n./ box

box type

3/8" QBFX038 See E3 price list - - -



1" QBFX100 See E3 price list - - -

1"1/4 QBFX114 See E3 price list - - -

1"1/2 QBFX112 See E3 price list - - -

2" QBFX200 See E3 price list - - -

Q/BRXStainless Steel A316L Union end: BS parallel male threaded

R Code € pack n./ box

box type

3/8" QBRX038 See E3 price list - - -



1" QBRX100 See E3 price list - - -

1"1/4 QBRX114 See E3 price list - - -

1"1/2 QBRX112 See E3 price list - - -

2" QBRX200 See E3 price list - - -

ADAPTOR FOR SOCKET WELDING - SS A316L UNION ENDS

25

E6

.15

Technical specificationsConstruction 2-way True Union ball valve with locked carrier and

lockable union nuts.Size range DN 10 ÷ 50Nominal pressure PN 16 with water at 20° CTemperature range -40 °C ÷ 140 °CCoupling standards Welding: EN ISO 10931.


Flanging system: ISO 7005-1, EN ISO 10931, EN 558-1,DIN 2501, ANSI B.16.5 cl. 150

Reference standards Construction criteria: EN ISO 16135, EN ISO 10931,Test methods and requirements: ISO 9393

Installation criteria: DVS 2201-1, DVS 2207-15, DVS 2208-1Actuator couplings: ISO 5211

Valve material PVDFSeal material FPM (standard size O-Ring, EPDM on request);

PTFE (ball seats)

Control options Manual control; electric actuator; pneumatic actuator

VKD

FIP has developed aVKD DUAL BLOCK®2-way ball valveto introduce ahigh reference standard in thermosplastic valve design. VKD is a True Union ball valve that meets the most stringent needs required by industrial applications.

DUAL BLOCK® 2-WAY BALL VALVE

DN 10÷50

• Connection system for weld and flanged joints• Patented SEAT STOP® ball carrier system that lets you micro-adjust ball

seats and minimise the axial force effect.• Easy radial disassembly allowing quick replacement of O-rings and ball

seats without any need for tools• PN16 True Union valve body made for PVDF injection moulding equipped

with built-in bores for actuation. ISO 9393 compliant test requisites• Option of disassembling downstream pipes with the valve in the closed po-

sition• Floating full bore ball with high surface finish• Integrated bracket for valve anchoring• Ball seat carriers can be adjusted using the Easytorque adjustment kit

26

1 HIPVC Ergonomic multifunctional handle equipped with removable tool to adjust the ball seat carrier

2 Handle lock 0°- 90° SHKD (available as an accessory) ergonomically operable during service and lockable

3 Robust integrated bracket for valve anchoring, for easy and quick automation even after valve installation on the system via the Power Quick module (optional)

4 DUAL BLOCK® patented lock system that ensures union nut tightening hold even in severe conditions such as vibrations or heat dilation

1

2

3

4

27

VKD DN 10÷50PVDF


E6

.15

VKDIFDUAL BLOCK® ball valve with metric plain socket ends for socket welding

d DN PN FPM code € pack n./

boxbox

type16 10 16 VKDIF016F 89,35 1 12 04

20 15 16 VKDIF020F 92,82 1 12 04

25 20 16 VKDIF025F 115,66 1 10 03

32 25 16 VKDIF032F 148,41 1 10 03

40 32 16 VKDIF040F 192,18 1 4 04

50 40 16 VKDIF050F 276,90 1 4 04

63 50 16 VKDIF063F 411,68 1 4 03

VKDIF/SHXDUAL BLOCK® ball valve with handle block and stainless steel inserts for fixation, metric plain socket ends for socket welding


boxbox

type16 10 16 VKDIFSHX016F 113,26 1 22 03

20 15 16 VKDIFSHX020F 116,72 1 12 04

25 20 16 VKDIFSHX025F 139,23 1 10 03

32 25 16 VKDIFSHX032F 172,81 1 10 03

40 32 16 VKDIFSHX040F 226,88 1 8 03

50 40 16 VKDIFSHX050F 307,50 1 8 03

63 50 16 VKDIFSHX063F 444,81 1 4 03

28

VKD DN 10÷50PVDFDUAL BLOCK® 2-WAY BALL VALVE

VKDDFDUAL BLOCK® ball valve with metric plain spigot ends for socket welding


boxbox

type20 15 16 VKDDF020F 109,30 1 22 03

25 20 16 VKDDF025F 136,67 1 10 03

32 25 16 VKDDF032F 173,07 1 6 03

40 32 16 VKDDF040F 218,58 1 8 03

50 40 16 VKDDF050F 318,79 1 6 03

63 50 16 VKDDF063F 473,59 - 1 05

Note: The valve might be supplied in VKDIF version with 2 spigot end connectors included

VKDOFDUAL BLOCK® ball valve with EN/ISO/DIN PN 10/16 fixed flanges, face to face according to EN 558-1


boxbox

type20 15 16 VKDOF020F 204,54 1 12 03

25 20 16 VKDOF025F 247,74 1 8 03

32 25 16 VKDOF032F 319,94 1 8 03

40 32 16 VKDOF040F 392,56 1 4 03

50 40 16 VKDOF050F 565,40 - 1 05

63 50 16 VKDOF063F 763,59 - 1 05

29

VKD DN 10÷50PVDF

E6

.15


VKDOAFDUAL BLOCK® ball valve with ANSI B16.5 cl.150#FF fixed flanges


boxbox

type1/2” 15 16 VKDOAF012F 204,54 1 8 03

3/4” 20 16 VKDOAF034F 247,74 1 8 03

1” 25 16 VKDOAF100F 319,94 1 4 03

1” 1/4 32 16 VKDOAF114F 392,56 1 - -

1” 1/2 40 16 VKDOAF112F 565,40 - 1 05

2” 50 16 VKDOAF200F 763,59 - 1 05

VKDBFDUAL BLOCK® ball valve with PVDF SDR21 metric long spigot ends (CVDF) for butt welding


boxbox

type20 15 16 VKDBF020F 109,30 1 12 03

25 20 16 VKDBF025F 136,67 1 12 03

32 25 16 VKDBF032F 173,07 1 8 03

40 32 16 VKDBF040F 218,58 1 8 03

50 40 16 VKDBF050F 318,79 1 6 03

63 50 16 VKDBF063F 473,59 - 1 05

Note: The valve might be supplied in VKDIF version with 2 CVDF end connectors for butt welding included

30

FIP has developed aVKD DUAL BLOCK®ball valve to introduce a high reference standard in thermosplastic valve design. VKD is a True Union ball valve that meets the most stringent needs required by industrial applications.This valve is alsoequipped with acustomisingLabelling System.

Technical specificationsConstruction 2-way True Union ball valve with locked carrier and

union nuts.Size range DN 65 ÷ 100Nominal pressure PN 16 with water at 20° CTemperature range -40 °C ÷ 140 °CCoupling standards Welding: EN ISO 10931.






PTFE (ball seats)

Control options Manual control; electric actuator; pneumatic actuator

VKD


• Connection system for weld and flanged joints• Patented SEAT STOP® ball seat carrier system that lets you micro-adjust

ball seats and minimise axial force effects• Easy radial disassembly allowing quick replacement of O-rings and ball



sition• Full bore ball with high surface finish• Integrated bracket for valve anchoring• Possibility of installing a gear box or pneumatic and/or electric actuators by

applying an ISO standard bore PP-GR flange• STAINLESS steel co-moulded stem, with square section as per ISO 5211

DN 65÷100

31

E6

.15

1 HIPVC ergonomic multifunctional handle for quick operation, lock and graduated adjustment in 10 positions. Possibility of inhibiting rotation with a lock

2 Customisable Labelling System: built-in LCE module made of a transparent protection plug and customisable tag holder using the LSE set (available as an accessory). The customisation lets you identify the valve on the system according to specific needs

3 DUAL BLOCK® patented lock system that ensures union nut tightening hold even in severe conditions such as vibrations or heat dilation

4 Double stem with double O-Rings for ball centring and operating torque reduction

1

2

3

4

4

32

VKD DN 65÷100PVDF

VKDIFDUAL BLOCK® ball valve with metric plain socket ends for socket welding


boxbox

type75 65 16 VKDIF075F 1.068,84 - 1 04

90 80 16 VKDIF090F 1.346,20 - 1 03

110 100 16 VKDIF110F 1.962,08 1 1 03

VKDDFDUAL BLOCK® ball valve with metric plain spigot ends for socket welding


boxbox

type75 65 16 VKDDF075F 1.175,71 - 1 04

90 80 16 VKDDF090F 1.480,82 - 1 03

110 100 16 VKDDF110F 2.158,33 1 1 03

VKDOFDUAL BLOCK ® ball valve with EN/ISO/DIN PN 10/16 fixed flanges*, face to face according to EN558-1


boxbox

type75 65 16 VKDOF075F 1.389,50 - 1 04

90 80 16 VKDOF090F 1.750,05 - 1 03

110 100 16 VKDOF110F 2.550,73 1 1 03


33

VKD DN 65÷100PVDF

E6

.15

VKDOAFDUAL BLOCK ® ball valve with EN/ISO/DIN PN 10/16 fixed flanges*, face to face according to EN558-1


boxbox

type2" 1/2 65 16 VKDOF075F 1389,50 - 1 04

3" 80 16 VKDOF090F 1750,05 - 1 03

4" 100 16 VKDOF110F 2550,73 1 1 03

VKDBFDUAL BLOCK® ball valve with PVDF SDR21 metric long spigot ends (CVDF) for butt welding


boxbox

type75 65 16 VKDBF075F 1.175,72 - 1 04

90 80 16 VKDBF090F 1.480,82 - 1 03

110 100 16 VKDBF110F 2.158,31 1 1 03


34

Technical specificationsConstruction 2-way True Union regulating ball valve with locked

carrier and lockable union nutsSize range DN 10 ÷ 50Nominal pressure PN 16 with water at 20° CTemperature range -40 °C ÷ 140 °CCoupling standards Welding: EN ISO 10931.






PTFE (ball seats)

Control options Manual control; electric actuator

VKR

The VKR DUALBLOCK® valve combines high reliability and safetyaspects typical ofVKD full bore ball valves with the new flow adjustment function with typical linear curve that meets the most stringent needs typical of industrial applications.

DUAL BLOCK® REGULATING BALL VALVE• Connection system for weld and flanged joints• Patented SEAT STOP® ball carrier system that lets you micro-adjust ball

seats and minimise axial force effects• Easy radial disassembly allowing quick replacement of O-rings and ball



sition• High surface finish stem with double O-Ring and double groove ball con-

nection• Integrated bracket for valve anchoring• Ball seat carrier can be adjusted using the Easytorque adjustment kit• Actuation option: version with electric modulating actuator with

4-20 mA / 0-10 V inlet and 4-20 mA / 0-10 V outlet to monitor the position• Valve suitable for carrying fluids that are clean and free of suspended par-

ticles

DN 10÷50

35

E6

.15

1

2

5

3

4

1 HIPVC ergonomic multifunctional handle with position indicator and removable key to adjust the ball seat carrier

2 Flow direction indication plate and opening angle with graduated scale with 5° detail for clear and accurate readings

3 90° operating angle that permits the use of standard quarter turn actuators

4 The patented ball design provides linear flow adjustment throughout its range of operation even when the valve is open just a few degrees and guarantees minimum pressure drops

5 Patented DUAL BLOCK® system: prevents union nuts from loosening even under extreme operating conditions: e.g. vibration or thermal expansion

36

VKR DN 10÷50PVDFDUAL BLOCK® REGULATING BALL VALVE

VKRIFDUAL BLOCK® regulating ball valve with metric plain socket ends for socket welding


boxbox

type16 10 16 VKRIF016F 183,58 1 12 04

20 15 16 VKRIF020F 187,06 1 12 04

25 20 16 VKRIF025F 213,12 1 10 03

32 25 16 VKRIF032F 258,12 1 10 03

40 32 16 VKRIF040F 314,83 1 4 04

50 40 16 VKRIF050F 523,42 1 4 04

63 50 16 VKRIF063F 881,25 1 4 03

VKRDFDUAL BLOCK® regulating ball valve with metric plain spigot ends for socket welding


boxbox

type20 15 16 VKRDF020F 203,54 1 22 03

25 20 16 VKRDF025F 234,13 1 10 03

32 25 16 VKRDF032F 282,77 1 6 03

40 32 16 VKRDF040F 341,24 1 8 03

50 40 16 VKRDF050F 565,32 1 6 03

63 50 16 VKRDF063F 943,17 - 1 05

Note: The valve might be supplied in VKRIF version with 2 spigot end connectors included

37

VKR DN 10÷50PVDF

DUAL BLOCK® REGULATING BALL VALVE

E6

.15

VKROFDUAL BLOCK® regulating ball valve with EN/ISO/DIN PN 10/16 fixed flanges, face to face according to EN 558-1


boxbox

type20 15 16 VKROF020F 298,78 - 1 05

25 20 16 VKROF025F 345,20 1 - -

32 25 16 VKROF032F 429,65 1 - -

40 32 16 VKROF040F 515,20 1 - -

50 40 16 VKROF050F 811,92 - 1 05

63 50 16 VKROF063F 1.233,17 - 1 05

VKROAFDUAL BLOCK® regulating ball valve with ANSI B16.5 cl.150#FF fixed flanges


boxbox

type1/2” 15 16 VKROAF012F 298,78 1 - -

3/4” 20 16 VKROAF034F 345,20 1 - -

1” 25 16 VKROAF100F 429,65 1 - -

1” 1/4 32 16 VKROAF114F 515,20 - - -

1” 1/2 40 16 VKROAF112F 811,92 - 1 05

2” 50 16 VKROAF200F 1.233,17 - 1 05

VKRBFDUAL BLOCK® regulating ball valve with PVDF SDR21 metric long spigot ends (CVDF) for butt welding


boxbox

type20 15 16 VKRBF020F 203,54 1 12 03

25 20 16 VKRBF025F 234,13 1 12 03

32 25 16 VKRBF032F 282,77 1 8 03

40 32 16 VKRBF040F 341,24 1 8 03

50 40 16 VKRBF050F 565,32 1 6 03

63 50 16 VKRBF063F 943,17 - 1 03

38

Technical specificationsConstruction Ball check valveSize range DN 15÷50Nominal pressure PN 16 with water at 20° CTemperature range -40 °C ÷ 140 °CCoupling standards Welding: EN ISO 10931


Reference standards Construction criteria: EN ISO 16137, EN ISO 10931,Test methods and requirements: ISO 9393Installation criteria: DVS 2202-1, DVS 2207-15, DVS 2208-1

Valve material Body: PVDFBall: PVDF

Seal material FPM (spare set in EPDM available on request)

SR

The SR check valve allows the passage of fluid in a single direction.

BALL CHECK VALVE

• Connection system for weld joints• PN16 valve body made for PVDF injection moulding and European

Directive 97/23/EC compliant for PED pressurised equipment. ISO 9393 compliant test requirements

• The valve can only be used with fluids with specific weight under 1,78 g/cm3

• Sealing system with antiblow out design• Ball completely in PVDF• Can be maintained with the valve body installed• Can be installed in either a vertical (preferable) or horizontal position

DN 15÷50

39

SR DN 15÷50PVDF

BALL CHECK VALVE

E6

.15

SRIFBall check valve with plain socket/spigot ends for socket welding

d DN PN Code € pack n./ box

box type

20 15 16 SRIF020F 125,39 1 16 04

25 20 16 SRIF025F 154,28 1 16 04

32 25 16 SRIF032F 179,52 1 6 04

40 32 16 SRIF040F 313,90 1 3 04

50 40 16 SRIF050F 338,25 1 3 04

63 50 16 SRIF063F 571,84 1 3 04

Note: for EPDM version use the FPM version + spare set in EPDM SETSR…E, ( ER Price List)

40

Technical specificationsConstruction Bi-directional centric butterfly valveSize range DN 40÷400Nominal pressure Wafer version

DN 40÷50: PN 16 with water at 20° CDN 65÷250: PN 10 with water at 20° CDN 300: PN 8 with water at 20° CDN 350: PN 7 with water at 20° CDN 400: PN 6 with water at 20° CLug version DN 65÷200: PN 10 with water at 20° CDN 250÷300: PN 6 with water at 20° C

Temperature range 0 °C ÷ 100 °CCoupling standards Flanging system: EN ISO 10931, DIN 2501, ISO 7005-1,

EN 1092-1, ASTM B16.5 Cl.150

Reference standards Construction criteria: EN ISO 16136, EN ISO 10931,Test methods and requirements: ISO 9393Actuator couplings: ISO 5211

Valve material Body: PP-GRDisk: PVDFStem: STAINLESS steel AISI 316

Seal material Liner: FPM. On request EPDM or NBR

Control options Manual control (DN 40÷200); Gearbox, pneumatic actuator, electric actuator

FK

The FK is a butterfly valve for shutting off or regulating flow, with structural characteristics that make it ideal for industrial applications requiring high performance and long-term reliability. This valve is also equipped with the customisable Labelling System.

BUTTERFLY VALVE

• Interchangeable Disk in PVDF with through shaft, available in different ther-moplastic materials: PVC-U, PP-H, PVC-C, ABS

• Overall dimensions of the valve in accordance with standard ISO 5752 (DN 40÷200 Medium Series 25, DN 250÷ 300 Long Series 16) and DIN 3202 K2 and ISO 5752 (DN 65÷200 K2, DN 250÷300 K3)

• Can also be installed as an end line valve, bottom discharge valve or tank dump valve

• Special Lug version PN 10 fully drilled according to DIN 2501 or ANSI B16.5 cl.150 with molded-in AISI 316 stainless steel threaded inserts

• Possibility of installing a manual reducer or pneumatic and/or electric ac-tuators by applying an ISO standard drilling PP-GR flanges. DN 40 ÷ 200 valve equipped with plate with rack in PP-GR. For actuated versions with flange drilled according to ISO 5211 F05, F07, F10. DN 250÷300 valve, fitted with one-piece top flange in high mechanical strength PP-GR with mount-ing flange for internal components drilled according to standard ISO 5211 F10 (excluding DN 350÷400), F12, F14.

DN 40÷400

41

E6

.15

1 Ergonomic handle in HIPVC equipped with locking and unlocking device, release, quick operation and graduated adjustment in 10 intermediate positions (DN 40÷200). The operating range, starting from the first few degrees of valve opening, also guarantees extremely low pressure drops

2 Customisable Labelling System: integrated module in the handle, made of a transparent protection plug and a customisable tag holder using the LSE set (available as an accessory). The customisation lets you identify the valve on the system according to specific needs

3 STAINLESS steel square section stem completely isolated form the fluid complying with standard ISO 5211:

DN 40÷65: 11 mm DN 80÷100: 14 mm DN 125÷150: 17 mm DN 200: 22 mm DN 250÷400: 27 mm

4 Body in polypropylene based compound reinforced with fibreglass (PP-GR) resistant to UV rays and characterised by high mechanical strength.

5 Drilling pattern using oval slots that allow coupling to flanges according to numerous international standards. The

special self-centring inserts in ABS supplied for DN 40÷200 guarantee the correct axial alignment of the valve during installation.

For DN 250÷400 valves, the drilling pattern for the self-centring system is of the traditional type according to DIN and ANSI standards

6 Interchangeable liner with the dual function of forming a hydraulic seal and isolating the body from the fluid

2

3

1

4 5

6

42

FK DN 40÷400PVDFBUTTERFLY VALVE

FKOF/LMHand operated Butterfly valve

d - Size DN PN FPM code € pack n./

boxbox

type50 - 1"1/2 40 16 FKOFLM050F 320,56 1 6 03

63 - 2" 50 16 FKOFLM063F 339,43 1 6 03

75 - 2"1/2 65 10 FKOFLM075F 377,11 1 6 02

90 - 3" 80 10 FKOFLM090F 392,72 1 6 02

110 - 4" 100 10 FKOFLM110F 417,23 1 5 02

140 - 5" 125 10 FKOFLM140F 554,55 1 4 02

160 - 6" 150 10 FKOFLM160F 570,15 1 4 02

225 - 8" 200 10 FKOFLM225F 739,38 1 2 02

Note: EPDM, NBR (d75-225) primary liner available, ER Price list

FKOF/LM LUG ISO-DINHand operated Butterfly valve, version Lug ISO-DIN


boxbox

type75 65 10 FKOLFLM075F 469,18 1 6 02

90 80 10 FKOLFLM090F 513,00 1 6 02

110 100 10 FKOLFLM110F 547,85 1 5 02

140 125 10 FKOLFLM140F 728,98 1 4 02

160 150 10 FKOLFLM160F 758,73 1 4 02

225 200 10 FKOLFLM225F 934,64 1 2 02


43

FK DN 40÷400PVDF

BUTTERFLY VALVE

E6

.15

FKOF/LM LUG ANSIHand operated Butterfly valve, version Lug ANSI


boxbox

type2” 1/2 65 10 FKOALFLM212F 515,21 1 6 02

3” 80 10 FKOALFLM300F 561,22 1 6 02

4” 100 10 FKOALFLM400F 600,60 1 5 02

5” 125 10 FKOALFLM500F 798,77 1 4 02

6” 150 10 FKOALFLM600F 834,43 1 4 02

8” 200 10 FKOALFLM800F 1.031,85 1 2 02

Note: EPDM, NBR (d 2” 1/2 - 8”) primary liner available, ER Price list

44


FKOF/FMButterfly valve with bare shaft


boxbox

type50 - 1"1/2 40 16 FKOFFM050F 286,49 1 6 03

63 - 2" 50 16 FKOFFM063F 303,33 1 6 03

75 - 2"1/2 65 10 FKOFFM075F 337,04 1 6 02

90 - 3" 80 10 FKOFFM090F 361,62 1 6 02

110 - 4" 100 10 FKOFFM110F 377,86 1 5 02

140 - 5" 125 10 FKOFFM140F 501,83 1 4 02

160 - 6" 150 10 FKOFFM160F 536,75 1 4 02

225 - 8" 200 10 FKOFFM225F 696,35 1 2 02

250 *250 10 FKOFFM280F 2.584,53 - 1 08

280 *250 10 FKOFFM280F 2.584,53 - 1 08

315 *300 8 FKOFFM315F 2.818,42 - 1 08

10" **250 10 FKOAFFM810F 2.584,53 - 1 08

12" **300 8 FKOAFFM812F 2.818,42 - 1 08

355 *350 7 FKOFFM355F 5.486,40 - - -

400 *400 6 FKOFFM400F 6.724,80 - - -

14" **350 7 FKOAFFM814F 5.486,40 - - -

16" **400 6 FKOAFFM816F 6.724,80 - - -

*ISO-DIN**ANSI B.16.5 150


45

FK DN 40÷400PVDF

BUTTERFLY VALVE

E6

.15

FKOF/FM LUG ISO-DINButterfly valve with bare shaft, version Lug ISO-DIN


boxbox

type75 65 10 FKOLFFM075F 429,08 1 6 02

90 80 10 FKOLFFM090F 481,88 1 6 02

110 100 10 FKOLFFM110F 508,54 1 5 02

140 125 10 FKOLFFM140F 676,28 1 4 02

160 150 10 FKOLFFM160F 725,30 1 4 02

225 200 10 FKOLFFM225F 891,57 1 2 02


FKOF/FM LUG ANSIButterfly valve with bare shaft, version Lug ANSI


boxbox

type2” 1/2 65 10 FKOALFFM212F 475,10 1 6 02

3” 80 10 FKOALFFM300F 530,05 1 6 02

4” 100 10 FKOALFFM400F 561,22 1 4 02

5” 125 10 FKOALFFM500F 746,08 1 4 02

6” 150 10 FKOALFFM600F 801,01 1 4 02

8” 200 10 FKOALFFM800F 987,44 1 2 02

10” 250 6 FKOALFFM810F 3.520,50 1 1 08

12” 300 6 FKOALFFM812F 3.775,84 1 1 08


46


FKOF/RMGearbox operated Butterfly valve


boxbox

type75 - 2" 65 10 FKOFRM075F 675,57 - 1 04

90 - 3" 80 10 FKOFRM090F 691,16 - 1 04

110 - 4" 100 10 FKOFRM110F 716,37 - 1 04

140 - 5" 125 10 FKOFRM140F 852,99 1 1 02

160 - 6" 150 10 FKOFRM160F 868,58 - 1 02

225 - 8" 200 10 FKOFRM225F 1.106,14 - 1 02

*280 250 10 FKOFRM280F 2.796,89 - 1 08

*315 300 8 FKOFRM315F 3.030,76 - 1 08

**10" 250 10 FKOAFRM810F 2.796,89 - 1 08

**12" 300 8 FKOAFRM812F 3.030,76 - 1 08

*355 350 7 FKOFRM355F 5.966,40 1 1 -

*400 400 6 FKOFRM400F 7.204,80 1 1 -

**14" 350 7 FKOAFRM814F 5.966,40 1 1 -

**16" 400 6 FKOAFRM816F 7.204,80 1 1 -

*ISO-DIN**ANSI B.16.5 150


FKOM/RM LUG ISO-DINGearbox operated Butterfly valve, version Lug ISO-DIN


boxbox

type75 65 10 FKOLFRM075F 767,62 1 1 04

90 80 10 FKOLFRM090F 811,40 1 1 04

110 100 10 FKOLFRM110F 847,04 1 1 04

140 125 10 FKOLFRM140F 1.027,43 1 1 02

160 150 10 FKOLFRM160F 1.057,12 - 1 02

225 200 10 FKOLFRM225F 1.301,36 - 1 02


47

FK DN 40÷400PVDF

BUTTERFLY VALVE

E6

.15

FKOF/RM LUG ANSIGearbox operated Butterfly valve, version Lug ANSI


boxbox

type2” 1/2 65 10 FKOALFRM212F 813,65 1 1 04

3” 80 10 FKOALFRM300F 859,66 1 1 04

4” 100 10 FKOALFRM400F 899,74 1 5 02

5” 125 10 FKOALFRM500F 1.097,22 1 1 02

6” 150 10 FKOALFRM600F 1.132,84 - 1 02

8” 200 10 FKOALFRM800F 1.398,60 - 1 02

10” 250 6 FKOALFRM810F 3.732,85 - 1 08

12” 300 6 FKOALFRM812F 3.988,20 - 1 08


48

Technical specificationsConstruction Diaphragm valve with maximized flow rate and

DIALOCK® lockable handwheelSize range DN 15 ÷ 65Nominal pressure PN 10 with water at 20° CTemperature range -20 °C ÷ 120 °CCoupling standards Welding: EN ISO 10931


Flanging system: ISO 7005-1, EN ISO 10931, EN 558-1, DIN 2501, ANSI B16.5 Cl.150

Reference standards Construction criteria: EN ISO 16138, EN ISO 10931Test methods and requirements: ISO 9393Installation criteria: DVS 2201-1, DVS 2207-15,DVS 2208-1

Valve material Body: PVDFBonnet and handwheel: PP-GRPosition indicator cap: PVC

Diaphragm material EPDM, FPM, PTFE (on request NBR)Control options Manual control; pneumatic actuator

DK

The DK DIALOCK® diaphragm valve is particularly suitable for shutting off and regulating abrasive or dirty fluids. The new internal geometry of the body optimises fluid dynamic efficiency by increasing the flow rate and ensuring an optimum linearity of the flow adjustment curve. The DK is extremely compact and very light. The innovative handwheel is equipped with a patented immediate and ergonomic operating locking device that allows it to be adjusted and locked in any position.

DIALOCK® 2-WAY DIAPHRAGM VALVE

• Connection system for solvent weld, threaded and flanged joints • Optimised fluid dynamic design: maximum output flow rate thanks to the

optimised efficiency of the fluid dynamics that characterise the new internal geometry of the body

• Internal components in metal, totally isolated from the fluid and external environment

• Modularity of the range: only 2 handwheel and 4 diaphragm and bonnet sizes for 7 different valve sizes

• Non-rising handwheel that stays at the same height during rotation, equipped with a graduated optical indicator protected by a transparent PVC cap with seal O-Ring

• Bonnet fastening screws in stainless steel protected against the external environment by PE plugs. Absence of metal parts exposed to the external environment to prevent any risk of corrosion

• CDSA (Circular Diaphragm Sealing Angle) system that, thanks to the uni-form distribution of shutter pressure on the diaphragm seal, offers the fol-lowing advantages:- reduction in the tightening torque of the screws fixing the actuator to the

valve body- reduced mechanical stress on all valve components (actuator, body and

diaphragm)- easy to clean valve interior- low risk of the accumulation of deposits, contamination or damage to the

diaphragm due to crystallisation- operating torque reduction

DN 15÷65

49

E6

.15

1 High visibility graduated optical position indicator protected by a transparent cap with seal O-Ring

2 Customisation plate: the customisation lets you identify the valve on the system according to specific needs

3 DIALOCK® SYSTEM: innovative handwheel with a patented immediate and ergonomic operating locking device that allows it to be adjusted and locked in over 300 positions

4 Handwheel and bonnet in high mechanical strength and chemically resistant PP-GR, providing full protection by isolating all internal metal parts from contact with external agents

5 Floating pin connection between the control screw and diaphragm to prevent concentrated loads, improve the seal and extend its lifetime

6 New design of valve body interior: substantially increased flow coefficient and reduced pressure drop. The degree of efficiency reached has also enabled the size and weight of the valve to be reduced

7 Adjustment linearity: the internal profiles of the valve also greatly improve its characteristic curve, resulting in extremely sensitive and precise adjustment along the entire stroke of the shutter.

8 Valve anchoring bracket integrated in the body, with threaded metal inserts allowing simple panel or wall mounting using the PMDK mounting plate (supplied as an accessory)

3

4

7

12

6

8

5

50

DK DN 15÷65PVDFDIALOCK® 2-WAY DIAPHRAGM VALVE

DKDFDIALOCK® diaphragm valve with male ends for socket welding, metric series

d DN PN EPDM code € FPM

code € PTFE code € pack n./

boxbox

type20 15 10 DKDF020E 95,63 DKDF020F 130,81 DKDF020P 146,09 1 8 03

25 20 10 DKDF025E 99,27 DKDF025F 136,22 DKDF025P 150,63 1 8 03






DKLDFDIALOCK® diaphragm valve with stroke limiter and male ends for socket welding, metric series



boxbox

type20 15 10 DKLDF020E 167,73 DKLDF020F 202,91 DKLDF020P 218,19 1 8 03

25 20 10 DKLDF025E 171,37 DKLDF025F 208,32 DKLDF025P 222,73 1 8 03






51

DK DN 15÷65PVDF

DIALOCK® 2-WAY DIAPHRAGM VALVE

E6

.15

DKUIFDIALOCK® diaphragm valve with female union ends for socket welding, metric series



boxbox

type20 15 10 DKUIF020E 129,02 DKUIF020F 164,15 DKUIF020P 179,52 1 8 03

25 20 10 DKUIF025E 136,22 DKUIF025F 173,20 DKUIF025P 187,62 1 8 03





DKLUIFDIALOCK® diaphragm valve with stroke limiter and female union ends for socket welding, metric series



boxbox

type20 15 10 DKLUIF020E 201,12 DKLUIF020F 236,25 DKLUIF020P 251,62 1 8 03

25 20 10 DKLUIF025E 208,32 DKLUIF025F 245,30 DKLUIF025P 259,72 1 8 03





52

DK DN 15÷65PVDFDIALOCK® 2-WAY DIAPHRAGM VALVE

DKOFDIALOCK® diaphragm valve with fixed flanges, drilled PN10/16. Face to face according to EN 558-1



boxbox

type20 15 10 DKOF020E 172,92 DKOF020F 208,09 DKOF020P 223,38 1 4 03

25 20 10 DKOF025E 179,89 DKOF025F 216,85 DKOF025P 231,26 1 4 03



50 40 10 DKOF050E 345,65 DKOF050F 406,08 DKOF050P 423,22 - 1 04



DKLOF version available on request

DKOAFDIALOCK® diaphragm valve with fixed flanges, drilled ANSI B16.5 cl. 150 #FF



boxbox

type1/2" 15 10 DKOAF012E 172,92 DKOAF012F 208,09 DKOAF012P 223,38 1 4 03

3/4" 20 10 DKOAF034E 179,89 DKOAF034F 216,85 DKOAF034P 231,26 1 4 03

1" 25 10 DKOAF100E 198,97 DKOAF100F 235,04 DKOAF100P 248,56 1 2 04

1" 1/4 32 10 DKOAF114E 312,56 DKOAF114F 372,07 DKOAF114P 389,23 1 2 04

1" 1/2 40 10 DKOAF112E 345,65 DKOAF112F 406,08 DKOAF112P 423,22 - 1 04

2" 50 10 DKOAF200E 450,34 DKOAF200F 550,49 DKOAF200P 547,74 - 1 04

DKLOAF version available on request

53

E6

.15

Technical specificationsConstruction Single wear diaphragm valveSize range DN 80 ÷ 100

Nominal pressure PN 10 with water at 20° CPN 6 with water at 20° C (PTFE version)

Temperature range -20 °C ÷ 120 °CCoupling standards Welding: EN ISO 10931.


Flanging system: ISO 7005-1, EN ISO 10931, EN 558-1, DIN 2501, ANSI B16.5 Cl.150

Reference standards Construction criteria: EN ISO 16138, EN ISO 10931Test methods and requirements: ISO 9393

Installation criteria: DVS 2201-1, DVS 2207-15, DVS 2208-1

Valve material Body: PVDFBonnet: PP-GRHandwheel: PA-GR

Diaphragm material EPDM, FPM, PTFE (on request NBR)Control options Manual control; pneumatic actuator

VM

The VM is particularly suitable for isolating and regulating abrasive or dirty fluids. The handwheel control and diaphragm seal provide precise and effective control, while reducing the risk of water hammer to a minimum.

DIAPHRAGM VALVE

• Connection system for weld and flanged joints • Compact and lightweight construction • High flow coefficient and minimum pressure drop • Internal components in metal totally isolated from the conveyed fluid,

with anti-friction disk to reduce friction to a minimum • Handwheel that stays at the same height during rotation

DN 80÷100

54

1 Handwheel in (PA-GR) with high mechanical

strength and ergonomic grip for optimum manageability

2 Metal optical position indicator supplied as standard

3 Full protection bonnet in PP-GR. Internal circular and symmetrical

diaphragm sealing area

4 Diaphragm available in EPDM, FPM, PTFE (NBR on request) and easy to replace

5 Threaded metal inserts for anchoring the valve

1

3

5

2

4

55

VM DN 80÷100PVDF

DIAPHRAGM VALVE

E6

.15

VMDFDiaphragm valve with metric spigot ends for socket welding



boxbox

type90 80 *10 VMDF090E 998,70 VMDF090F 1.294,15 VMDF090P 1.137,20 - 1 03

110 100 *10 VMDF110E 1.269,99 VMDF110F 1.763,35 VMDF110P 1.440,97 - 1 02

* PTFE: PN 6

VMOFDiaphragm valve with PN 10/16 fixed flanges. Face to face according to EN 558-1



boxbox

type90 80 *10 VMOF090E 1.279,47 VMOF090F 1.574,92 VMOF090P 1.417,96 - 1 02

110 100 *10 VMOF110E 1.602,78 VMOF110F 2.096,14 VMOF110P 1.773,77 - 1 02

* PTFE: PN 6

VMOAFDiaphragm valve with ANSI B16.5 cl. 150 #FF fixed flanges**

d PN DN EPDM code € FPM


boxbox

type3" *10 80 VMOAF300E 1.279,47 VMOAF300F 1.574,92 VMOAF300P 1.417,96 - 1 02

4" *10 **100 VMOF110E 1.602,78 VMOF110F 2.096,14 VMOF110P 1.773,77 - 1 02

*PTFE: PN 6**with flanges drilled DIN-ANSI

56

Technical specificationsConstruction Compact single wear diaphragm valveSize range DN 12÷15Nominal pressure PN 6 with water at 20° CTemperature range -20 °C ÷ 140 °CCoupling standards Welding: EN ISO 10931

Can be coupled to pipes according to EN ISO 10931Thread: ISO 228-1, DIN 2999

Reference standards Construction criteria: EN ISO 16138, EN ISO 10931Test methods and requirements: ISO 9393

Installation criteria: DVS 2201-1, DVS 2207-15, DVS 2208-1

Valve material Body: PVDFBonnet and handwheel: PA-GR

Diaphragm material EPDM, FPM, PTFEControl options Manual control; pneumatic actuator

CM

The CM is a manually operated diaphragm valve of reduced dimensions and particularly compact structure, ideal for use in confined spaces.

COMPACT DIAPHRAGM VALVE

• Connection system for weld and threaded joints• Extremely compact construction• Internal operating components in metal totally isolated from the

conveyed fluid• Valve stem in STAINLESS steel• Compressor with floating diaphragm support• Easy to replace diaphragm seal• Corrosion-proof internal components• Innovative CDSA (Circular Diaphragm Sealing Angle) system offering the

following advantages:- uniform distribution of shutter pressure on the diaphragm seal- reduction in the tightening torque of the screws fixing the actuator to the

valve body- reduced mechanical stress on all valve components (actuator, body and

diaphragm)- easy to clean valve interior- low risk of the accumulation of deposits, contamination or damage to the

diaphragm due to crystallisation- operating torque reduction

DN 12÷15

57

E6

.15

1 Handwheel in PA-GR, completely sealed, high mechanical strength with ergonomic grip for optimum manageability

2 Integrated adjustable torque limiter designed to prevent excessive compression of the diaphragm and always guarantee a minimum fluid flow

3 Optical position indicator supplied as standard

4 Bonnet in PA-GR with STAINLESS steel nuts fully protected by plastic plugs to eliminate zones where impurities may accumulate. Internal circular and symmetrical diaphragm sealing area

5 STAINLESS steel bolts, can also be inserted from above

6 Threaded metal inserts for anchoring the valve

1

2

3

6

5

4

58

CM DN 12÷15PVDFCOMPACT DIAPHRAGM VALVE

CMDFDiaphragm valve with metric spigot ends for socket welding



boxbox

type20 15 6 CMDF020E 90,16 CMDF020F 96,83 CMDF020P 101,24 1 8 04

CMIFDiaphragm valve with metric socket ends for socket welding



boxbox

type16 12 6 CMIF016E 65,03 CMIF016F 69,65 CMIF016P 77,08 1 8 04

20 15 6 CMIF020E 72,50 CMIF020F 85,51 CMIF020P 93,72 1 8 04

CMFFDiaphragm valve with BS parallel threaded socket ends

R DN PN EPDM code € FPM


boxbox

type3/8” 12 6 CMFF038E 65,03 CMFF038F 69,65 CMFF038P 77,08 1 8 04

1/2” 15 6 CMFF012E 72,50 CMFF012F 85,51 CMFF012P 93,72 1 8 04

59

CM DN 12÷15PVDF

COMPACT DIAPHRAGM VALVE

E6

.15

CMUIFDiaphragm valve with unionised metric socket ends for socket welding



boxbox

type20 15 6 CMUIF020E 94,82 CMUIF020F 101,24 CMUIF020P 105,93 1 8

*Union O-rings in FPM

60

CONNECTIONSPVDFCONNECTIONS FOR BALL VALVES

CVDFEnd Connector SDR21 in PVDF PN16 long spigot for butt welding or IR-welding

d PN to be used with: Code € pack n./box

box type

20 16 VKD - VKR - SR CVDF21020 14,21 1 - -

25 16 VKD - VKR - SR CVDF21025 17,78 1 - -

32 16 VKD - VKR - SR CVDF21032 19,04 1 - -

40 16 VKD - VKR - SR CVDF21040 23,74 1 - -

50 16 VKD - VKR - SR CVDF21050 35,06 1 - -

63 16 VKD - VKR - SR CVDF21063 47,36 1 - -

75 16 VKD CVDF21075 129,34 1 - -

90 16 VKD CVDF21090 162,88 1 - -

110 16 VKD CVDF21110 237,41 1 - -

Flanging Set ISO DIN (PVDF)Standard: DIN 2501 - EN 1092, face to face according to EN558-1 (VKD only) Set composition: 1 flange, 1 locking ring, 1 nut

d to be used with: Code € pack n./box

box type

20 VKD - VKR - SR SETFLOF020 68,85 1 - -






Note: factory assembled

61

CONNECTIONSPVDF

CONNECTIONS FOR BALL VALVES

E6

.15

Flanging Set ANSI (PVDF)Standard: ANSI B16.5 cl.150#FF Set composition: 1 flange, 1 locking ring, 1 nut


box type

1/2" VKD - VKR - SR SETFLOAF012 68,85 1 - -

3/4" VKD - VKR - SR SETFLOAF034 86,62 1 - -

1" VKD - VKR - SR SETFLOAF100 106,22 1 - -

1"1/4 VKD - VKR - SR SETFLOAF114 144,00 1 - -

1"1/2 VKD - VKR - SR SETFLOAF112 175,26 1 - -

2" VKD - VKR - SR SETFLOAF200 229,23 1 - -


Flanging Set ISO DIN - ANSI (PVDF)Standard: EN1092 / DIN2501 and ANSI B16.5 cl.150#FF face to face according to EN558-1.Set composition: 1 socket flange, 1 spigot end connector, 1 nut


box type

75 - 2"1/2 VKD SETFLOF075 352,47 1 - -

90 - 3" VKD SETFLOF090 528,18 1 - -

110 - 4" VKD SETFLOF110 680,67 1 - -


62

CONNECTIONSPVDFCONNECTIONS FOR BALL VALVES

ENDIFStandard: ISO metric plain socket for socket welding


box type

16 VKD - VKR - SR ENDIF016 17,91 1 - -

20 VKD - VKR - SR ENDIF020 17,91 1 - -

25 VKD - VKR - SR ENDIF025 23,31 1 - -

32 VKD - VKR - SR ENDIF032 31,34 1 - -

40 VKD - VKR - SR ENDIF040 40,74 1 - -

50 VKD - VKR - SR ENDIF050 48,23 1 - -

63 VKD - VKR - SR ENDIF063 73,54 1 - -

75 VKD ENDIF075 156,55 1 - -

90 VKD ENDIF090 245,42 1 - -

110 VKD ENDIF110 433,57 1 - -

*One piece

ENDDFStandard: ISO metric plain spigot for socket welding


box type

20 VKD - VKR - SR ENDDF020 17,91 1 - -

25 VKD - VKR - SR ENDDF025 23,31 1 - -

32 VKD - VKR - SR ENDDF032 31,34 1 - -

40 VKD - VKR - SR ENDDF040 40,74 1 - -

50 VKD - VKR - SR ENDDF050 48,23 1 - -

63 VKD - VKR - SR ENDDF063 73,54 1 - -

75 VKD ENDDF075 156,55 1 - -

90 VKD ENDDF090 245,42 1 - -

110 VKD ENDDF110 433,57 1 - -

*One piece

63

CONNECTIONSPVDF

CONNECTIONS FOR BALL VALVES

E6

.15

ENDFFStandard: BS parallel socket threaded*


box type

3/8" VKD - VKR - SR ENDFF038 17,91 1 - -

1/2" VKD - VKR - SR ENDFF012 17,91 1 - -

3/4" VKD - VKR - SR ENDFF034 23,31 1 - -

1" VKD - VKR - SR ENDFF100 31,34 1 - -

1"1/4 VKD - VKR - SR ENDFF114 40,74 1 - -

1"1/2 VKD - VKR - SR ENDFF112 48,23 1 - -

2" VKD - VKR - SR ENDFF200 73,54 1 - -

*One piece

ENDNFStandard: NPT tapered socket threaded*


box type

1/2" VKD - VKR - SR ENDNF012 17,91 1 - -

3/4" VKD - VKR - SR ENDNF034 23,31 1 - -

1" VKD - VKR - SR ENDNF100 31,34 1 - -

1"1/4 VKD - VKR - SR ENDNF114 40,74 1 - -

1"1/2 VKD - VKR - SR ENDNF112 48,23 1 - -

2" VKD - VKR - SR ENDNF200 73,54 1 - -

*One piece

64

CONNECTIONSPVDFSPARE END CONNECTORS FOR TRUE UNION DIAPHRAGM VALVES

Q/BBF-LPVDF SDR 21 end connector, long spigot for butt welding


box type

20 CM - DK - DKL - DKM QBBFL21020 17,05 1 - -

25 DK - DKL - DKM QBBFL21025 21,34 1 - -

32 DK - DKL - DKM QBBFL21032 22,85 1 - -

40 DK - DKL - DKM QBBFL21040 28,48 1 - -

50 DK - DKL - DKM QBBFL21050 42,07 1 - -

63 DK - DKL - DKM QBBFL21063 56,84 1 - -

Q/BIGFPVDF Union end for socket welding

d PN to be used with: Code € pack n./ box

box type

20 16 CM-DK-DKL-DKP-DKM QBIGF020 5,89 - - -

25 16 DK-DKL-DKP-DKM QBIGF025 7,59 - - -





65

pack n./box

box type

Q.ty of products per Pack 1

Q.ty of products per Carton Box 22

Carton Box type 03

Please note that pack and n/box quantities could be modified during the validity of the price list

Carton box dimensionsBox Tipe L (mm) P (mm) H (mm) Volume (m3)

00 800 600 400 0,1920

01 590 390 500 0,1151

02 590 390 300 0,0690

03 390 290 300 0,0339

04 390 290 200 0,0226

05 295 195 200 0,0115

08 680 600 280 0,1142

K01 200 200 130 0,0052

K02 200 200 200 0,0080

K03 300 200 200 0,0120

K04 300 260 200 0,0156

K05 400 300 200 0,0240

K06 400 300 250 0,0300

K07 200 150 100 0,0030

K08 300 100 100 0,0030

K09 300 260 300 0,0234

K10 400 200 200 0,0160

K11 400 400 130 0,0208

K12 400 400 250 0,0400

K13 400 260 420 0,0437

K14 400 300 250 0,0300

K15 400 300 300 0,0360

K16 400 400 250 0,0400

K17 400 400 300 0,0480

K18 600 400 300 0,0720

K19 600 400 500 0,1200

K20 800 600 350 0,1680

N01 160 160 350 0,0090

N02 170 170 300 0,0087

N03 190 190 300 0,0108

N04 210 210 300 0,0132

N05 220 220 220 0,0106

N06 240 240 240 0,0138

N07 280 280 170 0,0133

N08 300 300 180 0,0162

N09 350 350 130 0,0159

N10 410 410 150 0,0252

N11 470 470 90 0,0199

PACKAGING INFORMATION

H

P L

66

CONDITIONS OF SUPPLY• INTRODUCTORY STATEMENT: our supplies include the products specified in our Sales confirmation and are gover-

ned by the following Terms and Conditions which the Customer declares to understand and to accept, except for possible derogations stated in an explicity written agreement. In particular all foreign supplies will be governed by INCOTERMS, as defined by the International Chamber of Commerce.

• PRODUCTS: to prevent regrettable misunderstandings, it is advisable to refer to the nomenclature and codes of our catalogues and/or price lists for the identification of our products.The items featuring an asterisk (*), though currently on hand, are not included in our wide range of products for which stock rebuild is scheduled. Therefore our order acceptance depends upon the actual availability of the product.

• PACKAGING: to speed-up delivery and to facilitate warehousing at the Customer’s, we reserve the right to convert the ordered quantities into multiples of the standard packages, as shown in our price list next to each item.

• MINIMUM PURCHASE: for orders involving a net amount of less than € 258,23 for Italy: we will charge € 15,49, € 516,46 for other Countries: we will charge € 30,99 as partial recovery of the handling costs.

• PRICES: prices will be those in force at the time when the order was placed, except in case of forward delivery In the latter case, the prices in force at the time of shipment will be invoiced. Our prices include normal packing; spe-cial packing, if required by the customer will be charged at cost price.

• DELIVERY: delivery is intended ex our Warehouse or Stores and is normally prompt, subject to being unsold The anticipated delivery terms for unavailable items will be indicated, but these wjll be in no way binding or firm. If these delivery schedules cannot be kept for any reason whatsoever, the Purchaser can cancel the order only if the delay exceeds three months from the anticipated delivery date stated in our Order Confirmation. After this time lapse, we too shall be entitled to cancel any orders for items which delayed deliveries due to serious production problems.

• SHIPMENT: if the mode of shipment is not specifically indicated by the Customer, shipment will be effected as dee-med most suitable by us Even if the goods are sold free to destination, their transport will be at the Customer’s risk. Insurance coverage will only be effected if specifically requested by the Customer.

• PAYMENT: the Customer cannot, for any reason whatsoever, defer payments beyond the established dates. Furthermore, we shall be fully entitled to charge interests in arrears on any and all delayed payments. These intere-sts will be based upon the discount rate in force at that time in Italy, plus 3 unit % .

- Unless otherwise specified, payments shall be made by opening of an irrevocable credit at call (for Foreign Countries).

- Unless otherwise specified, payment shall be telegraphic transfer not !ater than 30 days after the date of invoicing (for Italy)

• OWNERSHIP CLAUSE: the products supplied by us will remain our property until fully paid for.• GUARANTEE CLAUSE: we guarantee the good quality of our products in compliance with the standards publicized

in our catalogues. However, our guarantee is limited to the repair and/or replacement of our materials, excluding any other liability, in particular for damages caused in any way whatsoever by utilization of our products. This gua-rantee terminates and will be no longer valid:

- one year after the delivery of the material in question; - if the material is used in other way than the operating conditions specified by us; - if the materials are modified by people not belonging to our Company. On this subject, it is should be noted that

the Purchaser will incur all liabilities provided by Law for any modification of our products. We shall be duly informed about any accidents in which our products are involved and such accidents shall be re-

ported to us immediately and within 24 Hours of their occurence.• CLAIMS: only complaints/claims reaching us by registered ietter within 30 days after invoicing date will be taken

into consideration. In particular, we will not accept any materials returned to us, unless their reshipment - free at our warehouses - has been duly authorized by our appropriate executive.

• DISPUTES: any disputes which cannot be amicably settled or settled by a court of arbitration, shall be handled by the Court of Genoa which will have jurisdiction.

• CUSTOMER SERVICE: our Technical and Commercial Services are available to all our Customers to provide any in-formation on the characteristics and application sectors of our products.

The above General Terms and Conditions may be changed without previous notice.All information contained in this collection are given in good faith and are correct at date of publication thereof.The drawings and photographs contained in this price list are provided for illustrative purposes.

FIP Formatura Iniezione Polimeri Loc. Pian di Parata, 16015 Casella Genova Italy

Tel. +39 010 9621.1

Fax +39 010 9621.209

[email protected]

www.fipnet.com

Documents

PRICE LIST E6 - aliaxis-ui.ataliaxis-ui.at/wp-content/uploads/2017/05/E6.15-PVDF-Pipes-Fittings... · page 13 page 15 page 16 page 18 page 19 page 20 ... • DVS 2207-15 Welding of