Pricelist 15 Th Sept 08

PRICE LIST 15TH SEPTEMBER, 2008

Elmex Controls Pvt. Ltd.Econix Hi-Tech Components Pvt. Ltd.12, GIDC EstateMakarpura RoadVadodara - 390010 (Gujarat), India

Note :Standard Colour of Melamine and Polypropylene Terminals and End Plate is Khakhi. All other colours (Red, Yellow, Blue, Black)are non-standard.Standard Colour of Polyamide 66 Terminals and End Plates is Khakhi/Grey. All other colours (Red, Yellow, Blue, Black, Green etc.)are non-standard.Standard Colour of "Econix" PCB Connector is Green. All other colours (Orange, Grey, Red, Yellow, Blue, Black etc.)are non-standard.

Page 1

I) "C" Series 32 mm DIN Rail Mounted Terminals with Melamine Housing:1)A)

100 6.85 7.55100 6.90 7.55100 8.30 9.15100 10.60 11.70100 18.25 21.10100 27.00 29.70100 34.80 38.30

5 190.00 218.505 150.00 172.505 170.00 195.505 380.00 437.005 340.00 391.005 360.00 414.00

B) End Plates For:100 2.90 3.15100 3.35 3.65100 6.10 6.65100 6.60 7.30100 6.80 7.5010 24.15 26.6010 36.80 40.50

C) Barrier Plates For:100 6.90 7.60100 10.65 11.70100 12.65 13.90

2)A)

10 72.00 79.2010 84.00 92.4010 118.00 129.80

Elmex Price List Dated 15th September, 2008

CSTM2.5

Standard TerminalsFor Conductor Size:

CST2.5CST6CST10CST16CST25CST35CST70CST70 BBCST70 BC

Sr.Rate in Rs. (Per Each) Non-Std.

ColourDescription Type Std.Pack. in/Nos. Rate in Rs. (Per

/Each)

CST185 CST185 BBCST185 BC

a)2.5 Sq.mm (Micro)b)4 Sq.mmc)6 Sq.mm d)10 Sq.mme)16 Sq.mm f)25 Sq.mmg)35 Sq.mmh)70 Sq. mm (Clamp – Clamp)i)70 Sq.mm (Bolt – Bolt)J)70 Sq. mm (Bolt – Clamp)k)185 Sq. mm (Clamp-Clamp)l)185 Sq. mm (Bolt- Bolt)m)185 Sq. mm (Bolt-Clamp)

a)CSTM2.5b)CST 2.5, CST6,CST 10c)CST 16d)CST25e)CST 35f) CST 70

KPNSEPXEPYEPTEPZEP70EP185

a)Terminal Type CST 2.5, CST6, CST10

g)CST 185

b)Terminal Type CST 16c)Terminal Type CST 35

BPXBPYBPZ

Power Terminals: (Bus Bar Type)For Conductor Size:a)35 Sq.mmb)35 to 50 Sq.mmc)50 to 70 Sq.mm

CBT100CBT110CBT170

Page 2




/Each)

10 166.00 182.6010 188.00 206.8010 86.50 95.1510 120.50 132.5510 168.50 185.3510 190.50 209.55

B)20 14.50 ----20 18.70 ----

C)100 4.40 5.95

3)A)

50 19.60 21.6050 22.25 24.5050 25.50 28.00

B)

50 22.75 25.0050 25.65 28.2050 37.50 41.2550 72.00 79.2050 44.50 48.95

C)100 3.80 4.15100 5.40 5.95

4)A)

50 44.50 48.95100 7.95 8.95

d)70 to 95 Sq.mme)70 to 120 Sq.mmf)35 to 50 Sq.mmg)50 to 70 Sq.mmh)70 to 95 Sq.mmi)70 to 120 Sq.mm

CBT250CBT 300CBT110TCBT170TCBT250TCBT300T

Barrier Plates (Hylam) For:a)CBT110/CBT 110Tb)CBT170/CBT170T, CBT 250/CBT250T, CBT300/CBT300T

BPH110BPH17/25

End Plate for:CBT100 EPS5/6Stud Type TerminalsScrew Driver OperatedFor Conductor Size:a)4 Sq.mmb)6 Sq.mmc)16 Sq. mm

CATM3CATM4CAT M5

Nut Driver OperatedFor Conductor Size:a)6 Sq.mmb)16 Sq.mmc)25 Sq.mmd)35 Sq.mme)35 Sq.mm (M.S.Bolt & Nut)

CBTM4CBTM5CBTM6CBTM6S1CBTM6S2

End Plates For:a)CATM3,CATM4,CAT M5,CBTM4, CBTM5, CBTM6b)CBTM6 S1,CBTM6S2

EPS4EPS5/6

Special Application Terminals:Test- Disconnect TerminalFor Conductor Size : 2x6 Sq.mmEnd Plate for CATDM4

CATDM4EPD4

Page 3




/Each)

B)50 41.00 45.10

100 7.35 8.10C)

50 34.00 37.40100 6.35 6.95

D)20 168.00 ----

E)

100 9.75 11.20100 14.75 16.95100 20.75 23.85

100 3.30 3.60100 6.00 6.65

1)A) 100 6.50 7.50B) 100 2.88 3.162)A)

100 16.50 18.15100 20.10 23.10

B)100 5.45 6.00

3)---- 33.00 37.95

1)A)

100 6.75 7.45

Test- Disconnect TerminalFor Conductor Size: 2x6 Sq.mmEnd Plate for CLTDM4

CLTDM4EPLD4

Test- Disconnect Terminal(Screw – Clamp Type)For Conductor Size: 6 Sq.mmEnd Plate for CSTD6

CSTD6EPTD

5 Way Plug & Socket TerminalFor Conductor Size 4 Sq.mm PSC 1/5Spring Loaded TerminalsFor Conductor Size:a)4 Sq.mmb)6 Sq.mmb)10 Sq.mm

II) "C" Series 32 mm DIN Rail Mounted Terminals with Nylon 66 Housing:

a)CST2.5 WS, CST6WSb)CSLT1

CST2.5 WSCST6 WSCSLT1

EPXEPSL1

End Plates For:

Standard TerminalsFor Conductor Size : 2.5 Sq.mm End Plates for CUTM2.5

CUTM2.5KPNS

Double Deck Terminals For Conductor Sizea)4 Sq.mm CUDD4b) -do- but with Internally Shorted Tiers CUDD4SEnd Plate ForCUDD4 and CUDD4S EPDD4CUDD4 with Diode/s, LED , Resistor,Zener etc. In Various Combination -----

III) "C" Series 32 mm DIN Rail Mounted Terminals Polypropylene Housing:Standard TerminalsFor Conductor Sizea)4 Sq.mm CUT4

Page 4




/Each)

100 7.80 8.60100 10.50 11.55

B)100 3.30 3.60

C) 100 6.00 6.60

1)A)

100 6.20 6.75100 6.40 7.15100 7.50 8.15100 8.25 8.95100 10.75 11.75100 18.25 20.00100 27.00 29.5050 35.75 39.2510 110.00 121.0010 180.00 198.00

B)100 2.90 3.15100 3.15 3.50100 6.05 6.65100 6.05 6.65

C)100 6.05 6.65100 7.20 7.90100 8.20 9.05

2)A A) For Conductor Size

100 9.50 10.95100 12.00 13.80

KST4U WSKST6WSb)6 Sq.mm

a)4 Sq.mm

b)6 Sq.mmc)10 Sq.mm

CUT6CUT10

End Plate for

Barrier Plate for

IV) "K" Series Universal DIN Rail Mounted Terminals with Nylon 66 Housing: (Grey/ Khakhi)Standard Terminals

CUT4, CUT 6, CUT 10

CUT4, CUT 6, CUT 10

EPX

CBX

For Conductor Sizea)2.5 Sq.mm b)2.5 Sq.mm (Slim)c)4 Sq.mm

KUT2.5KUTM2.5 (Slim)KUT4

KUT10KUT16KUT25

d)6 Sq.mm e)10 Sq.mmf)16 Sq.mm g)25 Sq.mm

KUT6

KUT35KUT50KUT95

End Plate For

h)35 Sq.mmi)50 Sq.mmj) 95 Sq.mm

a)KUT 2.5b)KUT4, KUT6, KUT10c)KUT16d)KUT 25

KPNSKPXKPYKPT

(End Plate For Terminal Type: KUT 35, KUT50, KUT 95 is not required as the housing is completely shrouded)Barrier Plates For:a)KUT 2.5b)KUT4, KUT6, KUT10c)KUT 16

KBMKBXKBY

Spring Loaded Terminals

Page 5




/Each)

B)100 3.15 3.50100 3.75 4.10

2)BA)

100 15.95 18.35100 17.90 20.60100 22.50 25.90

B)100 6.05 6.65

3)AA)

50 19.25 21.2050 22.95 25.2550 26.25 28.90

B)50 23.00 25.3050 27.15 29.9050 38.50 42.35

C)100 4.90 5.40

D) For Screw Driver Operated50 20.75 22.8550 23.25 25.60

E)10 4.90 5.4010 5.30 5.80

3)BA)

50 22.75 26.1550 26.45 30.4550 29.50 33.95

End Plates For: KATM4,KAT M5,KBTM4, KBT M5, KBTM6 KPS4

c)16 Sq.mm

KATM3CKATM4CKATM5C

Stud Type Terminals : Closed Version (Grey/ Khakhi), (Suitable for Ring Type Lug)Screw Driver Operated, For Conductor Sizea)2.5 Sq mmb)10 Sq.mm

b)6 Sq mmOAT2.5OAT6

b)OAT 6OEP2.5OEP6

End Plates For:a)OAT 2.5

a)2.5 Sq mm

Nut Driver Operated For

b)16 Sq.mmc)25 Sq.mm

KBTM4KBTM5-15KBTM6

a)10 sq.mm

b)10 Sq.mmc)16 Sq.mm

KATM3KATM4KATM5

Stud Type Terminals : (Grey/ Khakhi) (Suitable for Ring Type Lug)

a)2.5 Sq mm

Screw Driver OperatedFor Conductor Size:

Spring Loaded Terminals suitable for hook bladed lugs suitable for high vibrationFor Conductor Sizea) 4 Sq.mmb) 6 Sq.mmc) 10 Sq.mm

KULT 4, KULT 6,KULT1

KULT4KULT6KULT1

KPSLEnd Plates For

a)KST 4U WSb)KST6 WS

KPXKSP6WS

End Plates For

Page 6




/Each)

B)

50 26.75 30.7550 30.50 33.9550 42.50 48.90

4)A)

100 29.50 32.40B)

100 39.50 43.45100 40.75 44.85

5)A)

100 43.25 49.75B)

100 52.00 59.80100 53.00 60.95

C) 100 4.00 ----6)A)

100 46.20 50.85B)

100 53.00 58.30100 54.25 59.70100 55.55 63.90

100 63.80 70.20100 64.90 71.40

C)100 6.05 6.65100 8.35 9.20

c) -do- but with LED Indication (Fuse Failure Indication)

End Plate ForFor KUFH 4For KUF10

EPFHEPF

For DC ApplicationFor AC Application

KUF10DKUF10A

KUFH4

b)10 Sq.mm (Suitable for 5X20 / 5X25mm Glass Fuse)

KUFH4DKUFH4AKUF10

a)4 Sq.mm (Suitable for 6.3 X 32mm Glass Fuse)


a) -do- but with LED Indication (Fuse Failure Indication)

Link to use KUDF4 and KUDDF4 as Disconnecting TerminalFuse TerminalFor Conductor Size

KUDDF4DKUDDF4ADL4


Double Deck Fuse Feed Through TerminalsFor Conductor Sizea)4 Sq.mm KUDDF4a) -do- but with LED Indication (Fuse Failure Indication)

KUDF4AFor AC Application

Fuse Terminals : (Grey/ Khakhi)For Conductor Sizea)4 Sq.mm KUDF4a) -do- but with LED Indication (Fuse Failure Indication)For DC Application KUDF4D

Nut Driver OperatedFor Conductor Size:a)10 Sq.mmb)16 Sq.mmc)25 Sq.mm

KBTM4CKBTM5-15CKBTM6C

Page 7




/Each)

7)A) Knife Edge Type Terminal

100 25.00 27.50100 33.90 37.30

B)100 6.35 6.95

8)A

A) 100 30.00 33.00100 51.00 56.10100 59.00 64.90100 44.00 48.40

B)100 6.35 6.95100 6.90 7.60100 8.80 9.70100 5.40 5.95

8)BA)

100 42.00 46.20B)

100 7.20 7.909)A)

100 17.85 18.80100 20.10 22.15

B)100 5.45 6.05

10)A)

100 19.10 20.30

Sliding Link Type Terminals (Suitable for Ring/Fork Type Lugs)

a)2 x 6 Sq. mm

KU2D4

a)4 Sq.mm

a)KLTDM4Double Deck Terminal (Without Offset) For Conductor Sizea)4 Sq.mmb) -do- but with Internally shorted

a) KU2D4/ KU2D4SEnd Plates for

KLTDM4

Double Deck Terminal (with offset)

KUDD4For Conductor Size

d)KUTD 10 KPTD

KPLD4End Plates for

For Conductor Size

KSPDWSKPSLD

b)KSTD 6 WSc)KULTD 6

KU2D4S

EPDD4

For Conductor Sizea)6 Sq.mmb)6 Sq.mm

KPSDa)KUTSD6End Plates for

KUTSD6KSTD6WSKULTD6KUTD10

c)6 Sq.mmd)10 Sq.mm

b)4 Sq.mm (Grey) - Spring LoadedKULTD4KULTD4WS

Sliding Link Type Terminals

End PlateFor KULTD4,KULTD4WS KPSLD

Disconnecting Terminals

For Conductor Sizea)4 Sq.mm (Grey)

Page 8




/Each)

B)100 5.75 6.33

KU2D4/KUDD4 with Diode/s, LED, Resistor, 37.95

12)100 8.90 9.80

100 11.20 12.3013)A)

10 76.00 83.7510 92.50 101.7510 103.50 113.8510 113.50 124.8510 124.50 136.9510 135.50 149.0510 172.00 189.2010 184.00 202.4010 195.00 214.5010 260.00 286.0010 315.00 346.5010 138.00 151.8010 205.00 225.50

B) Barrier Plates For:DPBB50,DPBC50,DPCC50,DPBB 70,DPBC 70,DPCC 70 100 16.00 17.60

100 20.00 22.00DPBB185,DPBB 240 100 37.00 40.00

14)A)

100 48.00 --100 21.50 --

SPT35SPT70

a) 2.5 Sq mmb) Sensor Terminal

DU3D4DUSD4

For Conductor Size35 mm Rail Mounted TRIPLE DECK Terminals (D Series)

m) 70 Sq Mm (Shrouded)

j)185 Sq mm (Bolt-Bolt)k)240 Sq mm (Bolt-Bolt)l) 35 Sq mm (Shrouded)

BPN120DPBB120,DPBC 120,DPCC120

DPBB185DPBB240

f)70 Sq. mm (Clamp – Clamp)

DPBB50DPBC50DPCC50DPBB70d)70 Sq. mm (Bolt – Bolt)DPBC70DPCC70

e)70 Sq. mm (Bolt – Clamp)

DPBB120DPBC120DPCC120

g)120 Sq. mm (Bolt-Bolt)h)120 Sq. mm (Bolt- Clamp)i)120 Sq. mm (Clamp-Clamp)

BPN185

----

KBZF35 mm Rail Mounted Power (BUS BAR) Terminals For Conductor Size

BPN70

a)50 sq.mm (Bolt-Bolt)b)50 sq.mm (Bolt-Clamp)c)50 sq.mm (Clamp – Clamp)

11)

Barrier Plates For Universal Rail Mounted Terminal Blocksa) KUT 2.5,KUT4,KUT 4UWS,KUT6,KST6WS,KUT10,DBK3,DBK8,DBK 1X2,DBK1X4 KBXFDBK1X8,FDBK8,FDBK1X2,,FDBK1X4,FDBK1X8,ET6,ET10,UBT2.5,UBT4,UBT6,UBT10b) KULT1,KUT16,KUT25,KUT35,KUDF4,KUDF4A,KUDFD, ET16, ET35

a)KUDD4 KPDD

Zener etc. In Various Combination -----

End Plate For

33.00

Page 9




/Each)

B)100 7.60 --100 3.75 --

15)AA)

100 6.25 7.15100 8.50 9.60100 15.00 17.00100 29.00 33.50

B)100 10.50 12.00100 12.40 13.65

C)100 5.40 6.20100 7.80 8.60

D)100 4.40 4.85100 6.40 7.05

E)

100 34.80 38.30F)

100 45.00 49.50100 46.00 50.60

F)100 32.10 35.35

15)B100 30.00 --100 34.00 --100 45.00 --

b) For AC Application

DET6

DCF4 A

Spring Clamp Disconnect Terminala) 4 Sq mm DCDT4

DET2.5DET4

35 mm Rail mounted Spring Clamp Earth Terminalsa)2.5 Sq.mmb) 4 Sq.mmc) 6 Sq.mm

Spring Clamp Fuse Terminal

a) 4 Sq mm

a) For DC Application

DCF4

DCF4 D

For Conductor Size

-do- but with LED Indication (Fuse Failure Indication)

b) 4 Sq.mmSCT2.5SCT4

Panel Mounted Spring Clamp Terminalsa) 2.5 Sq mma) 2.5 Sq mm

MCT2.5MCT2.5P4

For Side Entrya) 2.5 Sq mm

b) 4 Sq.mmc) 6 Sq.mm

a) 2.5 Sq mmb) 2.5 Sq mm

DCT2.5-1X2DCT2.5-2X2

DCT2.5DCT4DCT6

For 1x2 ,2x2 input & outputd)10 Sq.mm DST10

b) DU3D4DP3DDPSD

35 mm Rail Mounted Spring Clamp Terminals For Conductor Sizea) 2.5 Sq mm

End Plate Fora) DU3D4

Page 10




/Each)

15) CA)

100 3.75 4.10100 4.60 5.10100 5.20 5.70100 6.50 7.15100 4.70 5.20100 8.60 9.50100 3.45 3.80100 3.85 4.25100 3.45 3.80100 8.60 9.50

B)100 4.90 ----100 9.20 ----100 12.95 ----100 18.00 ----100 8.65 ----100 7.50 ----100 12.10 ----

16)A)

100 34.50 ----50 41.75 ----50 44.75 ----50 55.25 ----20 105.00 ----

17)A)

10 50.00 57.5010 65.00 74.7510 85.00 97.7510 100.00 115.00

DBK3DBK4DBK5DBK6

c) 5 Wayd) 6 Way

Distribution BlocksSuitable for 10 Sq.mm Incoming and Outgoinga) 3 Wayb) 4 Way

e) 35 Sq.mm

ET4ET6ET10ET16ET35

c) 10 Sq.mmd) 16 Sq.mm

Earth TerminalsFor Conductor Sizea) 4 Sq.mmb) 6 Sq.mm

e) DCT2.51X2,SCT2.5f) MCT2.5,MCT2.5P4g) DCF4,DCDT4

DSL2.5DSL4DSL6SSL10SSL2.5MSL2.5SSL4

d) DST10

f) DCF4g) SCT2.5h) SCT4i)MCT2.5,MCT2.5P4j) DCDT4Push In Type Shorting Link -(Insulated) suitable fora) DCT2.5b) DCT4

DFEPSEP2.5SEP 4

c) DCT6

DCEPMEP2.5

e) DCT2.5-1X2,DCT2.5-2X2

b) DCT4, DET4c) DCT6, DET6

DMP2.5d) DST10

DEP4DEP6DSEP10

Accessories for Spring Clamp terminalsEnd Plate Fora) DCT2.5, DET2.5 DEP2.5

Page 11




/Each)

10 112.00 128.80B)

10 37.00 42.5510 47.00 54.0510 58.00 66.7010 70.00 80.5010 90.00 103.50

C)DBK2.5-10Way 10 95.00 109.25

10 84.00 96.6010 116.00 133.4010 168.00 193.20

E)

10 215.00 247.2510 240.00 276.00

F)

10 240.00 276.0010 280.00 322.00

G)

10 290.00 333.5010 330.00 379.50

H)

10 75.00 86.2510 84.00 96.6010 130.00 149.50

I)10 160.00 184.00

Suitable for 4 & 10 sq mm combinationa) 12 way DFBK12

Suitable for 25 Sq.mm (Incoming) WireAnd 4 Sq.mm (Outgoing) Wirea) 1 INPUT X 4 OUTPUTb) 1 INPUT X 8 OUTPUTc) 1 INPUT X 16 OUTPUT

FDBK1x2FDBK1x4FDBK1x8

Suitable for 150 Sq.mm (Incoming) Wireand 35 Sq.mm (Outgoing) Wire - For Ring/Fork Type Lugsa) 1 INPUT X 4 OUTPUTb) 1 INPUT X 8 OUTPUT

DBK150/M6C-1x2DBK150/M6C-1x4

Suitable for 150 Sq.mm (Incoming) Wireand 25 Sq.mm (Outgoing) Wirea) 1 INPUT X 4 OUTPUTb) 1 INPUT X 8 OUTPUT

DBK150/25-1x2DBK150/25-1x4

a) 1 INPUT X 4 OUTPUTb) 1 INPUT X 8 OUTPUT

DBK150/16-1x2DBK150/16-1x4

Suitable for 150 Sq.mm (Incoming) Wireand 16 Sq.mm (Outgoing) Wire

a) 1 INPUT X 4 OUTPUTb) 1 INPUT X 8 OUTPUTc) 1 INPUT X 16 OUTPUT

DBK1x2DBK1x4DBK1x8

a) 10 WaySuitable for 2.5 Sq.mm Incoming and Outgoing

D) Suitable for 35-50 Sq.mm (Incoming) Wireand 10 Sq.mm (Outgoing) Wire

Suitable for 4 Sq.mm Incoming and Outgoinga) 3 Wayb) 4 Wayc) 5 Wayd) 6 Waye) 8 Way

FDBK3FDBK4FDBK5FDBK6FDBK8

e) 8 Way DBK8

Page 12




/Each)

K)10 90.00 103.5010 90.00 103.50

18)A)

10 48.30 52.0010 110.00 116.0010 73.50 78.0010 155.25 164.00

19)A)

100 6.00 6.60100 6.05 6.60100 7.50 8.25100 8.50 9.35100 9.50 10.45

B)100 2.60 2.85100 2.60 2.85100 2.20 2.40100 3.75 4.10100 3.75 4.10

V)1)A)

100 9.00 9.90100 9.90 10.90100 10.90 12.00100 13.55 14.90100 16.35 18.00100 27.00 29.70100 18.00 19.80

f) 4 Sq.mmg) 4 Sq.mm

“U” SERIES TERMINALS (WITH ALL BRASS METAL COMPONENTS)Feed Through Terminals

a)2.5 Sq.mmFor Conductor Size

b)2.5 Sq.mmc) 4 Sq.mm

UBT2.5NUBT2.5UBT4

End Plates Fora) SUT1.5b) SUT 4c) CET 4d) MBT 4e) NET 4

ES2ES4EPMMP1EPMN

e) 0.5- 4 Sq.mm (With All Brass Components)

SUT1.5SUT4CET4MBT4NET4

c) 0.5 – 4 Sq.mm (With All Brass Components)d) 0.5- 4 Sq.mm (With All Brass Components)

15 mm DIN Rail Mounted Micro Terminals For Conductor Sizea) 0.5- 1.5 Sq.mm b) 0.5- 4 Sq.mm

Lighting Pole Terminals For Conductor Sizea) 4-25 sq mmb) 6-35 Sq mmc) 4-25 sq mmd) 6-35 Sq mm

LPT225LPT235LPT325LPT335

Micro Distribution BlocksDBP4-10WayDBM4-10Way

a) 10 ways -Panel Mountedb) 10 ways- Using SUT4

UBT6d) 6 Sq.mme)10 Sq.mm UBT10

UBDD4UBT4TWIN

Page 13




/Each)

2)A) 100 34.25 37.65

B) 100 48.00 52.80100 49.00 53.90

C) 100 10.00 --D)

100 2.90 3.20100 3.15 3.50100 5.75 6.30100 5.50 6.05

3)A)

100 41.00 --100 45.00 --100 50.00 --100 60.00 --

VI) A) 250 6.95 7.65

250 7.30 7.90100 7.50 NA100 11.20 NA100 14.00 NA100 17.50 NA100 23.00 NA100 28.00 NA

100 45.00 NA100 34.00 NA

VII) PA)

50 15.25 NAB) 100 3.00 3.50

Screw – Solder Terminals (With Tab 0.8 x 2.8 mm Size)For Conductor Size

j) Disconnect Type (Pitch 5.08 mm)

PLT1EPL

h) Fuse Connector (Pitch : 10.16 mm)i) Disconnect Type (Pitch 5.08 mm)

ECDFECDTL

PUTS2ECD2

a) 4 sq.mm (Side Entry)End Plate For PLT 1

ECCD2ECDD3

ECDT"elmex" Panel Mounted Terminals

f) Double Deck – 3 way (Pitch 5.08 mm)g) Internal Shorted

EBT6EBT4TWIN

ECDS

"elmex" PCB Connectors a) Pitch 7.5 mmb) (Pitch 5.08 mm)c) Single Deck – 2 Way (Pitch 5.08 mm)d) Single Deck – 3 way (Pitch 5.08 mm)e) Double Deck – 2 way (Pitch 5.08 mm)

PUT2.5

b) UBT2.5N, UBT4, UBT6, UBT10

a) For AC Application

c) UBDD4

ECD3

a)2.5 Sq.mmb) 4 Sq.mmc) 6 Sq.mmd)4 Sq.mm

EBT2.5EBT4

a) 4 Sq.mm

d) UBT4TWIN

UPNSUPXUPDD4UPTWIN

a) UBT2.5

LED Kit suitable for UBDF4 Terminal - Incorporating Fuse Failure Indication Circuit LED Kit

Fuse Terminal

a) For DC Application UBDF4D -do- but LED Indiacation (Fuse Failure Indication)

U Series Earth TerminalsFor Conductor Size

UBDF4A

End Plates for

UBDF4

Page 14




/Each)

C)50 6.30 6.95

D) 100 3.45 3.80IX) ACCESSORIES1)A)

50 1.20 ----50 1.20 ----50 1.60 ----50 1.85 ----50 2.00 ----50 2.30 ----50 2.30 ----

B)50 2.75 ----50 2.90 ----50 3.15 ----50 5.20 ----

C)50 1.50 ----50 1.50 ----50 1.75 ----50 2.00 ----50 2.15 ----50 2.50 ----50 2.9050 1.75 ----

D)50 2.60 ----50 3.10 ----50 4.00 ----50 4.95 ----50 5.75e) RSL35K

LSR2.5-6LSR10-16LSR25LSR35LSR35K

c) RSL 25d) RSL 35

RSL1LLong Stud with Screws for Removable Shorting Link, fora) RSL2.5, RSL 6b) RSL 10, RSL 16

f) CST35g) KUT35h) CSLT1

RSL2.5RSL6RSL10RSL16RSL25RSL35RSL35K

Removable Shorting Links. Fora) CST2.5,CST2.5WS,CUT4,KUT4,KST4UWSb) CST6,KUT6,CUT6,KST6WS,CSTWSc) CST10,CUT10,KUT10d) CST6.KUT16,KUT25e) CST25

Short Stud with Screws for Permanent Shorting Links, fora)PSL2.5, PSL6b)PSL10, PSL 16c)PSL 25d)PSL35

SSP2.5-6SSP10-16SSP25

PSL16

SSP35

e) CST25f) CST35g) KUT35

PSL25PSL35PSL35K

d) CST16,KUT16,KUT25

b) CST6,KUT6,CUT6,KST6WS,CST6WSPSL2.5PSL6

a) 4 Sq. mma) End Plate For PET4

Inter Connecting AccessoriesPermanent Shorting Links – 2 Way , for

c) CST10,CUT10,KUT10 PSL10

PET4EPP

a) CST2.5,CST2.5WS,CUT4,KUT4,KST4UWS

Feed Through Terminals

Page 15




/Each)

50 3.10 ----2)

50 4.9550 5.20 ----50 4.95 ----50 5.20 ----50 5.20 ----50 6.60 ----50 6.70 ----50 6.80 ----50 6.90 ----50 6.90 ----50 5.20 ----50 6.60 ----50 4.60 ----50 5.10 ----50 5.20 ----50 5.75 ----

Available upto 10 ways(No. of ways required = Rate for 2 ways / 2 x No. of ways required)

3)50 8.00 ----50 8.35 ----50 8.60 ----50 8.60 ----50 8.90 ----50 8.90 ----

50 3.05 ----

(No. of ways required = Rate for 2 ways / 2 x No. of ways required)

4)Available upto 6 ways

Available upto 10 ways(No. of ways required = Rate for 2 ways / 2 x No. of ways required)Permanent Shorting Link – 2 Way for CET4, NET4 SLE2

Fork type shorting Links - 2 ways for

b) CATM3c) CATM4,KATM4,KATM5,KBTM4d) CBTM4e) CBTM5, KBTM5-15f) CATDM4, KLTDM4

ASL1ASL2BSL4BSL5ADSL2

CCLA35CCLA35KCCLADDCCLA1L

CCLA6CCLA10CCLA16CCAL25

m) DU3D4,DUSD4n) KULT4

CCLAK6CCLA1LK

CCLATDCCLAK4

o) KULT6p) KULT1

e) CST6,CUT6,KUT6,KST6WS,CST6WS,KUT6Nf) CST10,CUT10,KUT10,KUT10Ng) CST16,KUT16h) CST25,KUT25i) CST35j) KUT35k) CUDD4,KUDD4,KU2D4,SUT4,PET4l) CSLT1

Cross Connection Link assembly for Permanent Shorting 2 way with Captive Screws, Sleeves and spring Washer, fora) KUT2.5N,KUTM2.5b) SUT1.5c) CSTM2.5, CUTM2.5,KUT2.5,KUT4Nd) CST2.5,CST2.5WS,CUT4,KUT4,KST4UWS

CCLK2.5CCLA1.5CCLM2.5CCLA2.5

f) RSL 1L LSR1L

a) KATM3 ASLK1

Page 16




/Each)

5)50 6.33 ----50 6.90 ----50 8.00 ----

6)50 4.60 ----50 5.20 ----50 5.90 ----50 8.95 ----50 8.95 ----50 10.95 ----50 10.15 ----

7)

---- 50.25 -------- 55.25 ----

---- 6.10 -------- 6.50 -------- 6.60 -------- 9.20 -------- 9.60 -------- 9.90 -------- 66.00 -------- 7.75 -------- 12.10 -------- 17.25 -------- 23.30 -------- 26.50 -------- 6.90 ----

73.00

PCP170PCP250PCET4

n)CBT250,CBT250T,CBT300,CBT300T (FOR SINGLE TERMINAL)o)CET4 (FOR SINGLE TERMINAL)

m)CBT170,CBT170T (FOR SINGLE TERMINAL)

PCST(300mm)

PCCM20PCCM30PCCM26

PCCM60

PCCM39PCCM45

PCP110

I)CATDM4,CLTDM4,LTDM4 (COVER 2 TERMINAL BLOCKS)j)CATDM4,CLTDM4,KLTDM4 (COVER 3 TERMINAL BLOCKS)k)CATDM4,CLTDM4,KLTDM4 (COVER 3 TERMINAL BLOCKS)l)CBT110,CBT110T (FOR SINGLE TERMINAL)

PCD3(300 mm)PCDM26PCDM39

KATM5,KBTM4,KBTM5-15,KBTM6c) CATM3,KATM3 (COVER 2 TERMINAL BLOCKS)d)CATM3,KATM3,KBTM5-15(COVER 3 TERMINALS)e)CATM4,CATM5,KATM4,KATM5,KBTM4,KBTM5,(COVER 3 TERMINALS 3 BLOCKS)f)CBTM4,CBTM5,KATM4,KATM5,KBTM4,KBTM5 (COVER 3 TERMINAL BLOCKS)g)CBTM4,CBTM5,KBTM5-15 (COVER FOR 3 TERMINAL BLOCKS)h)CBYM6(COVER 3 TERMINAL BLOCKS)

b)CATM3,CATM4,CATM5,CBTM4,CBTM5,CBTM6,KATM3,KATM4, PCC 3( 300 mm)

f) KULTD6g) UBDF4Available upto 10 ways(No. of ways required = Rate for 2 ways / 2 x No. of ways required)Transparent Protective Cover for(Also available in other length – on request)

UFSL

a)CST2.5,CST6,CST10,CUT4,CUT6,CUT10,KUT4,KUT6,KUT10

KDSLSLD6CLUF

d)KUDF4,KUDDF4e)KUTD10

Comb Type Shorting Links with Insulation – 2 Waysa)KUT2.5,CUTM2.5,CSTM2.5,KU2D4S,KULTD4,CUDD4Sb)CST2.5,CST2.5WS,CUT4,CUT6c)CST6,KUT6,CSTD6,KUTSD6,KSTD6WS

SLCM2.5SLC2.5SLC6

PERMANENET SHORTING LIKS 2- WAYSa)MBT4, UBT2.5,UBT4,UBDD4,UBT4TWINb)UBT6c)UBT10

SLU4SLU6SLU10

p) For Mounting On Entire Stack of the Terminal Blocks With the Help of UHDD PCK3 (300mm)

Page 17




/Each)

8)

---- 36.00 -------- 53.00 -------- 105.00 -------- 210.00 ----

---- 25.00 -------- 35.00 -------- 63.00 ----

---- 73.00

---- 27.50 -------- 55.00 ----

---- 120.00 ----

---- 108.00 ----

9)

200 2.75 ----200 4.50 ----100 3.60 ----100 6.00 ----100 8.50 ----100 7.60 ----100 10.50 ----100 13.50 ----100 12.50 ----

----

SCKNMLH(Polyamide66)SCUN(Polyamide66)

SCS (Metallic)SCSN(Polyamide66)SCMN(Polyamide66)SCKN(Polyamide66)

SCUSL (Polyamide66)

h) -do- but with Marking Label Holderi) 32 and 35 mm Railj) 32 and 35 mm Rail

SCUNMLH(Polyamide66)SCUDD (Polyamide66)

f) 35mm Railg) 32 and 35 mm Rail

f) 35 mm Rail (15mm depth) 1000 mm (1 Mtr.) Length

a) 32 mm Railb) 32 mm Raild) 15 mm Raile) 35 mm Rail

CHKD10

Side Clamps with Fixing ScrewsSuitable for

CHM10 1000 mm (1 Mtr.) Lengthe) 35 mm perforated Rail (15mm depth) 1000 mm (1 Mtr.) Length CHKDS10

c) 35 mm Perforated Rail (7.5mm depth) 1000 mm (1 Mtr.) Length CHKS10d) 15 mm Rails for Micro Terminals 500 mm Length CHM5

300 mm Length 500 mm Length 1000 mm (1 Mtr.) Length

CHK3CHK5CHK10

Mounting AccessoriesA) Mounting Rails (Zinc Plated with Yellow Passivation) - Also available in other length – on request.

2000 mm (2 Mtr.) Length

CHS3CHS5CHS10CHS20

b) 35 mm Rails (7.5mm depth) for K Series Terminals

a) 32 mm Rails for Melamine Series Terminals, K Series Terminals, C Series Terminals 300 mm Length 500 mm Length 1000 mm (1 Mtr.) Length

Page 18




/Each)

10) Snap- On Type Nylon Marking Label Strips ( 1 Strip = 10 Labels)For Terminal Type

LABEL KN 9 (BLANK/PRINTED) 100 4.75/5.75 ----LABEL KN 10 (BLANK/PRINTED)

100 3.50/4.25100 3.50/4.25100 4.00/5.00100 4.00/5.00100 4.75/5.75100 3.25/3.75100 3.50/4.25100 4.00/5.00

11)---- Per Card 35.00 ----

12)10 8.90 ----10 9.80 ----10 10.35 ----10 10.70 ----10 14.75 ----

13)---- 12.65 ----

14) 50 18.00

DPCC50,DPBB70,DPBC70,DPCC70,DPBB120,DPBC120,DPCC120,SPT35,SPT70,DBK8,DBK1X2DBK1X4,DBK1X8,CST16,CST25,CST70,CST70BB,CST70BC,CST185,CST185BC,CBT100, CBT110,CBT170,CBT250,CBT300,MCT2.5P4, DST10

d) KUFH4,KUFH4D,KUFH4A

PVC Group Marking CarrierFor 32 mm DIN Rail GMC

a) CST2.5, CUT4, KUT6b) CST6, CUT6, KUT6c) CST10, CUT10, KUT10d) CST16, KUT16e) CST 35

WL 16WL 35

Snap- On Type Nylon Marking Label CARDS ( 1 Card = 100 Labels)Suitable for Terminals on which Label KN5.5 fits KC5.5Warning Labels with Mounting Screws (Nylon) for Standard Terminals

WL 2.5WL 6WL 10

100

LABEL KN 6.5 (BLANK/PRINTED)

LABEL KN 5.5 (BLANK/PRINTED)

KUTD10,KSTD6WS,KULTD6,CST10,CSLT1,CUT6,,DCF4,DCF4,DCDT4

e) KUT10,KUT16,KUT25,KUT35,KUT50,KUT95,ET10,ET16,ET35,KULT1,KUT10N,KUF10,DPBB50,DPBC50,

c) KUT6,KST6WS,ET6,KULT6,KATM3,KATM3C,KUDF4,KUDDF4,KUTSD6,KUT4,KST4UWS,FDBK8,FDBK1X4,FDBK1X8,NET4,CST6,CST6WS,CATM4,CATM5,CUT4b) KUT4,KST4UWS, ET4, FDBK8,FDBK1X4,FDBK1X8,NET4,CST6,CST6WS,CATM4,CATM5,CUT4

m) DCT6

a) KUT2.5,KU2D4,KU2D4S,KUDD4,DU3D4,DUSD4,KULT4,KUT4N,KUT6N,KUDD4N,KLTDM4,KUKTD4,KULTD4WS,SUT,CET4,PET4,KUDD4(COMPONENT HOUSING),CSTM2.5,CST2.5,CST35,CST2.5WS,CATM3,CBTM4,CBTM5,CBTM6,CBTM6S1,CATDM4,CLTDM4,CSTD6,CUTM2.5,CUDD4,KATM4,KATM5,KBTM5,KBTM6,KATM4C,KATM5C,KBTM4C,KBTM5C,KBTM6C,MCT2.5

f) UBT2.5g) UBT2.5,UBT4,UBDD4,UBT4TWIN,EBT4TWIN,MBT4

LABEL DN 5.2(BLANK/PRINTED)

h) UBT6

LABEL DN8.2(BLANK/PRINTED)

LABEL U8.25(BLANK/PRINTED)LABEL U10(BLANK/PRINTED)

i) UBDF4,UBDF4D,UBDF4Aj) UBT10k) DCT2.5,DCT2.5-1X2,DCT2.5 2X2,SCT2.5,KUTM2.5l)DCT4

100 4.75/5.75 ----

----3.25/3.75

100 3.50/4.25 ----

LABEL KN 8.0 (BLANK/PRINTED) 100 4.00/5.00 ----

Barrier Plate Universal Rail Mounted to Support PCK3 UHDD

LABEL U5(BLANK/PRINTED)LABEL U6(BLANK/PRINTED)LABEL U8(BLANK/PRINTED)

LABEL U6.2(BLANK/PRINTED)

Page 19




/Each)

Note: This supercedes our earlier Price-List Prices are subject to change without prior notice.

Terms & Condition:Prices : Ex Works Vadodara/Por exclusive of Freight , Taxes etc.Excise Duty : Extra as applicable. CST : Extra as applicable. LST : Extra as applicable.Freight : To-pay Insurance : If desired by you at your cost

Place of Jurisdiction : The competent place of jurisdiction will be Vadodara, Gujarat, India

Page 20

Documents

Pricelist 15 Th Sept 08