Upload
mary
View
62
Download
5
Tags:
Embed Size (px)
DESCRIPTION
Primary and secondary tillage and land modification for Potato. Primary and secondary tillage and land modification for Potato. Abstract : Potato crop prefers well-pulverized seed bed for its better germination, growth and yield. - PowerPoint PPT Presentation
Citation preview
Abstract:
Potato crop prefers well-pulverized seed bed for its better germination,
growth and yield.
Soil is brought to fine tilth through repeated tillage operations prior to
potato planting.
Tillage operations carried in potato cultivation can be grouped in to two,
1. Primary tillage and 2. Secondary tillage.
Country plough, mould board plough, disc plough, Bose plough,
cultivator are some of the commonly used primary tillage implements in
potato cultivation.
Previous Next End
Cultivator, harrows, planks are regularly used for secondary tillage
in potato fields.
However, country plough, cultivators and harrows are used as duel
purpose i.e. for both primary and secondary tillage operations in
potato fields in developing countries.
Land modifications for making preferred method of potato
planting, i.e. ridges and furrows in addition to other methods such
as planting flat beds, shallow furrow planting, planting tubers and
ridging etc. are made either manually or mechanically.
Previous Next End
Learning objectives:
To learn the primary and secondary tillage operations carried out in potato
cultivation in potato.
To know the different land modification needed for planting potato.
Previous Next End
Introduction:
Potato ranks fourth position in the world after wheat, rice and maize as
non-cereal food crop. It is used in many ways like vegetable, potato
wafers/chips, powder, finger chips etc.
Potato tubers constitute a highly nutritious food. It provides
carbohydrates, vitamin C, minerals, high quality protein and dietary fibre.
The potato needs well pulverized seed bed for tuber production.
Previous Next End
The soil is brought to a fine tilth by giving 8-10 ploughings followed by
planking (after each ploughing).
The process of planking levels the land, breaks the clods, collects the
weeds and compresses the soil slightly. The preparation of land is usually
begin at 6-8 weeks before the sowing of potato during which 25 tonnes/ha
of compost or FYM are applied to the soil.
The soil should be made free from stubbles, weeds and clods. Now-a-
days, tractors and power tillers are employed for land preparation the
latter makes the soil more pulverize, free from weeds and clods by
minimum number of tillage than that of country plough
Previous Next End
Primary tillage
The tillage operation that is done after the harvest of crop to bring the
land under cultivation is known as primary tillage or ploughing.
Ploughing is the opening of the compact soil with the help of different
ploughs.
Primary tillage is done mainly to open the hard soil and to separate the top
soil from lower layers and to uprooting of weeds also.
Potato is a crop whose growing season is short and whose planting time is
restricted. Speedy agricultural operations are a basic need to ensure
success. Previous Next End
The primary objective of tillage in potato is to prepare the land for
placement of tubers. The secondary objective of tillage is that is to control
the weeds in potato at the early stages of plant emergences.
Fine soil tilth is maintained for potato cultivation.
To achieve this, a very high number of tillage operations to the extent of
6-12 times is practiced which not only cause delay in planting at optimum
time but also, disturb the aggregation of soil particles as well as moisture
content in the soil.
Previous Next End
Experimental results however, suggest that the number of tillage
operations can be appreciably reduced.
There are several implements used for primary tillage are as follows.
Country plough
It is an indigenous plough and is one of the most common implements
used by potato farmers of developing countries. It is drawn with a pair of
bullocks. It is used both for tilling the land and harvesting of potato.
The plough can work up about 0.14 ha/day in the initial ploughing and
subsequently the efficiency increases to about 0.20 ha/day.
Previous Next End
Mould board plough
It is most suitable for primary tillage of almost all types of soil in potato
cultivation.
It cuts square furrow and the soil is inverted completely depending on the
curvature given to the mould board plough and thus help in burying the
weeds.
The mould board plough ploughs to a depth of 15 cm having width from
15 to 35 cm. It covers 0.20-0.26 ha/day.
Previous Next End
Bose plough
It is a modified form of mould board plough. It is made of wood except
the share which is made of steel or iron.
The structure and function of this plough is almost similar to mould
board plough.
This plough is gaining popularity among the potato farmers. Most of the
farmers of developing countries, cultivating potato are using this plough.
Previous Next End
Disc plough
It is also used for ploughing which have little resemblance to common
mould board plough. It is clod breaking implements which is invariably
used for initial ploughing in hard soil under potato cultivation. It can
cover about two hectares a day.
Spade
Spade is most common implements used for various agricultural
operations like bunding, channeling, ridging and harvesting of potato. It is
used for breaking and preparing of the soil when the land size is small.
Previous Next End
Secondary tillage
The tillage operations that are performed on the soil after primary
tillage to bring a good soil tilth are known as secondary tillage.
Secondary tillage consists of lighter or finer operation which is
done to clean the soil, break the clods and incorporate the manures
and fertilizers. Since the potato prefers fine seedbed, the secondary
tillage operations are inevitable.
Previous Next End
There are some implements used for secondary tillage are as follows
Cultivator
It is one of the most useful implements used for secondary tillage of potato
field.
It may also be used for primary tillage cultivation and weeding purposes soon
after the emergence of the plant.
It can cover 1.0 to 1.5 hectares of land in a working day of 8 hours.
Harrow
It is commonly used for secondary tillage and is drawn by a tractor in potato
fields. Harrows are used for making the soil loose and friable.
Previous Next End
It makes the soil pulverized very well and hurried the weeds completely.
It can cover 1.0 hectares of the land in a working day of 8 hours in tractor
attachment.
Harrows can also be attached with power tillers, but, the area coverage
will be lesser (0.5 ha/day).
Ladder or plank
It is an age old implement used for secondary tillage purposes in potato.
Planking is done to crush the hard clods level the soil surface and to
compact the soil lightly. It is pulled by a pair of bullock or tractor.Previous Next End
Land modification in potato
After tillage operations, potato is planted by different methods in various
parts of the world. However, ridge and furrow method is the most popular
method of potato planting.
The planting of potato can be grouped into two types, viz., manual and
mechanical planting. According to planting methods, resource availability
of farmers and soil types, the land modifications are also varies.
Hence, planting methods along with land modifications are given
hereunderPrevious Next End
Manual planting
Shallow furrows drawn with curved /narrow-blade spade followed by planting and
covered the seed tubers on the North side of the ridge.
Another method is after marking with the rope or marker on the soil surface,
tubers are placed on these lines and then ridges are made either with bullock
drawn implements or with narrow-blade spade manually.
A double row method of planting came into practice in Jalandhar (India) in the
1950s, wherein fertilizers were applied on soil surface as a continuous band in
rows 70-80 cm apart, tubers were placed on soil surface on both sides of the band
about 10-15 cm apart, followed by ridging.
Previous Next End
In fine textured soils, after pre-planting irrigation and when soil is in
working condition, the seed tubers are inserted in about 5 cm below the
bottom of the furrows with sturdy thin edged tool in moist soil.
In some parts of Uttar Pradesh, Madhya Pradesh and Maharashtra (India),
while drawing the furrows with a country plough, cut seed or small tubers
are placed in the furrows by Pora or behind the plough in the furrows
manually, leaving the alternate furrow vacant. Planking is done after
planting.
Previous Next End
In another method, after application of fertilizers, first 10-12 cm high
ridges are formed with hand scraper or narrow blade spade or with
country plough and then tubers are dibbled at a depth of 5-7 cm from the
top in the centre of the ridge with Khurpa (a narrow-blade tool).
In heavy textured soils, furrows are opened first at a distance of 45-50 cm
and light irrigation is given.
At optimum soil moisture, soil is made fine and pulverized by ploughing
and then after placing the tubers, ridges are made.
Previous Next End
Mechanical planting
Tractor drawn 2 or 4 row marker-cum-fertilizer drill is used for making
furrows and placing of fertilizers in the furrows followed by planting with
2 or 4 row potato planter-cum-ridger.
A tractor drawn 2 or 4 row potato planter in which all the operations, viz.,
opening of furrows, application of fertilizers, placement of tubers and
ridging are combined together and done simultaneously.
It saves a lot of time and reduces soil compaction by tractor wheels
compared with the method where these operations are done separately in
two trips.
Previous Next End
After opening shallow furrows, tubers are placed in furrows followed by
ridging with tractor drawn ridger.
In another method, ridges are made with the tractor drawn ridger after
application of fertilizers and tubers are dibbled 5-7 cm deep on the ridges
manually.
Size of the ridge
Ridges and furrows
Size of the ridge depends upon the soil texture, availability of water and the
crop is planted for ware or seed purposes. Generally, 45-60 cm wide ridges are
preferred for potato cultivation.
Previous Next End
Thin and low ridges are favoured for quick emergence; require
low volume of water for getting moistened and save time as well
as cost of labour.
For early potato crop, quick and early emergence and fast grow
and development is important owing to short duration of the
crop.
Hence, it is desirable that only small volume of soil exists over
the seed tubers at planting and full ridge are made at earthing up.
Previous Next End
In the case of main crop, initial ridging to a height of 5, 10
and 15 cm after placing the seed tubers on soil surface
followed by earthing up after emergence to a uniform height
gave similar yields of main crop of potato.
A good ridge having triangular shape is necessary after
emergence to with stand irrigation water, to provide space for
developing tubers and to check greening of tube from
sunlight Previous Next End
The ridge height is reduced gradually with the running water with each
irrigation in coarse textured soil, whereas, in fine textured soil, negligible
reduction takes place and ridges remain firm and intact.
However, delayed irrigation at bulking favours development of cracks in
soils giving passage to sun rays which cause greening to the tubers.
Summary:
Potato crop needs well pulverized soil for its better performance.
The main objectives of tillage in potato are to prepare the land for
placement of tubers and to control the weeds.
Previous Next End
Bose plough is a common plough in developing countries and Disc
plough is used for initial ploughing in hard soil under potato cultivation.
Secondary tillage consists of lighter or finer operation which is done
through harrows, cultivator and planking.
Ridge and furrow method is the most popul
Planting in shallow furrows, marking and tubers are placed on these
lines, planting after pre-planting irrigation, inserting seed tubers 5
cm below the bottom of the furrows, Pora or behind the plough, are
some of the manual methods followed in potato cultivation.
Previous Next End
Tractor drawn 2 or 4 row marker-cum-fertilizer drill, tractor drawn 2 or 4
row potato planter, ridging with tractor drawn ridger are some of the
popular mechanical planting methods of potato.
Generally, 45-60 cm wide ridges are preferred for potato cultivation.
Previous Next End
1. Potato crop needs well pulverized soil (True / False)
2. Main objectives of tillage in potato is to make inter-cultural
operations (True / False)
3. Country plough is one of the most common implements used by
potato farmers of developing countries (True / False)
4. Harrow is commonly used for primary tillage and is drawn by a
tractor in potato fields (True / False)
Previous Next End
5.Cultivators can be used for primary tillage cultivation and weeding
purposes soon after the emergence of the plant (True / False)
6.Ridge and furrow method is the most popular method of potato
planting (True / False)
7.Less than 30 cm wide ridges are preferred for potato cultivation (True /
False)
Previous Next End
Hari Om and R.S. Hooda. 1985. Effect of methods of planting and fertilizer levels
on yield and quality of the potato. Journal of Indian Potato Association. 12 (1-2):
105-109.
http://www.niir.org/books/book/potato-potato-products-cultivation-seed-
production-manuring-harvesting-organic-farming-storage-processing-npcs-board-
consultants-engineers/isbn-9788190439893/zb,,131,a,0,0,a/index.html
Kushwah, V.S. and P.M. Govindakrishnan, 1993. Cultural practices for potato
cultivation. In: Advances in Horticulture, Vol. 7-Potato. Eds. Chandha, K.L. and
J.S. Grewal, Malhotra Publishing House, New Delhi.
Kushwah, V.S. and S.S. Lal. 1988. Cultural practices for seed potato production.
Seeds and Farms. 14 (9): 11-15.
Previous Next End