Primjer testa zatite na raduBroj tonih odgovorado 3031 - 3637 - 4243 - 4748 - 50

Ocjena12345

1. What is the purpose of The Workplace Safety:a) After passing the test, worker can ask for more non - labor daysb) To protect worker safety and health in the workplacec) To maintain machines and devices more efficiently

2. Employee has the right to refuse working if:a) He has not been paid offb) He works overtimec) He is in direct life danger because of safety standards violation

3. Who is responsible for hand and power tool safety?a) The employerb) The employeec) The National Safety Organizationd) Both a and b

4. If the employee violates safety standards or does not use personal safety equipment, employer is obligated to:a) Send employee home immediatelyb) Warn the employee and forbid future work in repeated casec) Move the employee to another workplace

5. If you spotted the fault in electric device or installation, you are obligated to:a) Repair the fault yourself and continue workingb) Inform the superiorc) Continue working regardless the fault

6. Replacing of damaged fuse or minor repair of electrical devices is allowed to:a) Professional and authorized electricians onlyb) All employees who know how to fix itc) Any employee confirmed by employer7. What does this sign mean?a) Entranceb) Evacuation exitc) Mandatory moving direction

8. Who is responsible for providing you with Personal Protective Equipment (PPE)?a) Your employerb) Your supervisorc) Your co-workerd) Yourself

9. Once your employer has provided you with PPE, you must use it whenever you are at work, even if your job changes.a) Trueb) False

10. What is a hazard:a) Anything with the potential to cause harmb) Where an accident is likely to cause harmc) The likelihood of something going wrongd) An accident waiting to happen

11. At what angle should ladders be placed against a wall?a) 75b) 40c) 50d) 65

12. Which level of AC voltage is considered safe:a) 230 Vb) 110 Vc) 50 Vd) 25 V

13. Maximum recommended load to be lifted for women and young people is:a) 5 kgb) 15 kgc) 25 kgd) None of the above

14. What does the health and safety sign below mean?a) Dangerous to the environmentb) Hot liquidc) Corrosived) Irritant

15. What does this sign mean?a) Eye protection recommendedb) Opaque eye protection must be wornc) Eye protection not needed beyond this pointd) Eye protection must be worn

16. What does the health and safety sign below mean?a) This item is flammableb) This item is corrosivec) This item could exploded) This item is toxic

17. What does this sign mean?a) Fuel stationb) Lightning rodc) High voltage

18. What does this sign mean?a) Switching on not allowedb) Weight dumping not allowedc) Switch off after using

19. What does this sign mean?a) Hand washing areab) Protective gloves must be wornc) Protective gloves recommendedd) Use barrier cream

20. What does this sign mean? a) Rotating part hazardb) Do not clean oiling machineryc) Cleaning oiling machinery mandatory before used) Do not touch rotating parts

21. What does this sign mean?a) General dangerb) Beware of electricityc) Toxicd) Stop your work immediately

22. What does this sign mean?a) Low temperature hazardb) Laser radiation hazardc) Rotating parts hazardd) Radiation hazard

23. Mains supply in EU is:a) 110 V ACb) 230 V DCc) 230 V ACd) 400 V AC

24. Which of the following are contributing causes of back injuries?a) Lifting objects incorrectlyb) Being physically unfitc) Poor postured) All of the above25. Is it allowed to drink alcohol at work:a) No, under any circumstancesb) Yes, if the worker is just assisting to co-workersc) Yes, because its workers right

26. What are the most likely consequences of lifting and carrying weight:a) Arms and legs injuriesb) Spine injuries and herniac) Stomach ache

27. The effects of damage to your hearing by long-term exposure to high noise levels:a) can be corrected by an operationb) are permanentc) will be reduced when you change jobsd) can be reversed to near normal, with time

28. When should you wear eye protection?a) Only when youre working with power toolsb) Only when youre working with hazardous chemicalsc) When the task has a potential for eye injury and if the site rules demand itd) Only when your eyes come into direct sunlight

29. Does smoking affects working capability:a) Smoking increases working capabilityb) Smoking decreases working capabilityc) Smoking does not affect working capability

30. Which of the following should you do first when your co-worker has suffered an electrical shock?a) Move the victim away from the electrical source b) Shut off the source of electricity if possiblec) Check the victims breathing and pulse. Begin CPR if necessaryd) Call or bring in an emergency medical team

31. Electrical fires are best tackled with a:a) Water fire extinguisherb) CO2 fire extinguisherc) Wet chemical fire extinguisherd) Foam fire extinguisher

32. The safest way to lift a load is to:a) Keep you back rounded at all timesb) Keep your back straight at all timesc) Keep your feet as close as possibled) Keep your feet slightly apart with your back rounded

33. What is the recommended limit for a compact load that can be safely carried by a fit, male worker?a) 50kgb) 40kgc) 20kgd) 25kg

34. The electric drill you are about to use has a faulty on/off switch. What action should you take?a) Try and fix the faultb) Find another machine and carry on workingc) Stop work and inform your supervisord) Tape the switch on to keep it running and carry on working

35. The lowest level of electrical current which can harm the human body is normally measured in:a) microampsb) kiloampsc) ampsd) milliamps

36. When should you check your hand tools for damage?a) At least once a monthb) At least once every 3 monthsc) At least once every 6 monthsd) It should always be checked before you use it

37. Hand tool with sharp and peaky parts must be transported in:a) Pockets of working suitb) Workbags or boxesc) Hands

38. The specific effects on the human body of a major electric shock are one of the following:a) Dermatitisb) Burns and cardiac arrestc) Broken bonesd) Chest pains

39. Which of these best describes working at height?a) 5m above the groundb) 6m above the groundc) 10m above the groundd) Any height above or below ground level that can cause an injury if you fall

40. When must injury accidents be recorded?a) Only if you break a boneb) Only if you have time off workc) Any time they occurd) Only if you need to go to hospital

41. Exposure to asbestos fibres may cause which one of the following?a) Dermatitisb) Asthmac) Glandular feverd) Asbestosis42. What is the main color on a safety sign stating that you must NOT do something?a) Blueb) Greenc) Redd) Yellow

43. What is a fire assembly point?a) The place to go when the fire alarm soundsb) A place where the fire brigade goes toc) A place where fire extinguishers are keptd) The place where the fire alarm is

44. When working in dusty conditions, the best way of protection is:a) using a respiratorb) good ventilation inside working placec) wearing a paper mask

45. Your co - worker has a suspected fracture of the spine. The first action should be:a) Place casualty in recovery positionb) Test for response in patients toesc) Seek urgent medical assistanced) Place solid objects on either side of the casualties head to prevent movement of the neck and spine46. If someone's clothing is on fire, how should you extinguish it?a) Get them to run aroundb) Send them outside where it may be colderc) Wrap them in a coat or curtaind) Use a fan to blow out the flames

47. If someone is bleeding from a wound, what can you do to help?a) Let the blood drain out.b) Put pressure on the injury.c) Tie a tourniquet above the injury.

48. What is the most important thing to do to help someone who has a burn?a) Wrap the burn in cling film or a clean plastic bag.b) Wipe the burn with antiseptic wipes.c) Cool the burn under cold running water.

49. How does noise affect human organism:a) Noise causes hearing impairment and lower working capabilityb) Noise causes insomnia and stomach achec) Noise causes sweating, muscle inflammation and hair loss

50. At what amperage should a GFCI trip?a) 0.005 Ab) 0.5 Ac) 5 A

Answers:1. A2. C3. D4. B5. B

6. A7. B8. A9. B10. A

11. A12. C13. B14. C15. D

16. C17. C18. A19. B20. B

21. A22. D23. C24. D25. A

26. B27. B28. C29. B30. B

31. B32. B33. D34. C35. D

36. D37. B38. B39. D40. C

41. D42. C43. A44. A45. D

46. C47. B48. C49. A50.A

9