Pro-Line II Filing Frame

Efficiency in the office.

The Pro-Line II filing frame is the perfect solution for professional equipment of office cabinets. It combines innovative technology with highly functional design. Its comfort features offer tangible advantages regarding its usage. The results are low production costs and high customer satisfaction.

Schock full extension slide Load capacity 70 Kg (dynamic)

50 mm over-extensionEasy access and tabbing of filing maps

70 mm self-closing deviceSafe closing function

Rack + pinion parallel guidanceOne single locking device is sufficient

Standard colour: blackOther colours available on request

Modular filing frameFinal assembly without toolsSame assemblies for all cabinetsPremounting of filing frame possible

Frame detachable from the slidesEasy disassembly and reassembly

Locking systemsadaptable to modern locking systemsfrom Huwil, Lehmann, Ojmar …

Triple customer benefit.

1. Easy access

The 50 mm over-extension allows for a perfect access to the rear storage space. Protrusions or handles have no negative effect on the convenience of handling. The filing maps can be comfortably removed and filed.

3. Perfect motion

The Schock rack + pinion parallel guidance ensures a synchronized movement. The guides run smoothly without jamming or racking even when closing the drawer from the corner.

2. Safe closing

The 70 mm self closing device guaran-tees a safe and complete closing of the frame. Malfunctions and damages of the furniture are being avoided.

On request also available with additional

damping system "Soft Control 2".

(C) Rack + Pinion parallel guidance "Syncro"

Double cog rows with involute toothing.

OBlocking force is similar to a locking system.

ne single locking device is sufficient.

Schock ball bearing slidewith rack + pinion parallel guidance.

Maintenance-freeDirt will be auto-matically displacedby the balls

Long life durability

Lateral impacts

will be absorbed

elastically

High load capacityLoad rate 70 KgLGA-tested with100.000 cyclesCount: 100.000

(A) 50 mm over-extension

Telescopic extended rack.

No additional space required.

(B) 70 mm self-closing device

Integrated in the rack of the parallel guidance.

No loss of load capacity (e.g. for 3 x A4 width).

Easy access and tabbing of filing maps.

Safe closing function.

Final assembly without tools.

(1) Screw-in the cabinet brackets Hole patterns see page 6-9(2) Attach the slide modules Front cutout of cabinet brackets for installation with front cover. Rear cutout for installation behind doors (see page 8-9)(3) Attach the front and rear panel(4) Insert the connection rod Push both pinion retainer clips (left and right) towards the pinion wheels until they click into place

Order data for basic equipment see page 18-19

Order data for accessories see page 13

Assembly:

The cabinet brackets are screwed into the side walls before the final cabinet assembly. At the end of the production, the filing frame will be mounted without tools. This modular system provides a high flexibility in production as well as considerably low storage costs.

Disassembly:

(1) Pull out the filing frame

(2) Detach the pinion retainer clips

Lift latch and pull the clip backwards

(3) Remove the connection rod

(4) Remove the filing frame (see illustration)

Lock rear panel by bending over the latch at the slide panel.

Lift frame at the frontside and pull forward

until the bayonet lancings are released,

then take off the frame.

325 ø 4,3

Filing map

37

Frame depth / Drawer depth

272

20

64

30

40

94

19

245

20

4,5

43

Vertical graduation system 25 mm.

Interior cabinet depth

325

225

175

125

100

19

69

25

25

20

Frame width / Drawer width

A6 crosswise

A4 longwise

A4 crosswiseA5 longwise

A5 crosswise

Swivel plates

Minimum heightof front cover:

3

Locking bar

80

3

22

69

3

Front edge of cabinet = rear edge of front cover*

Locking bar

Regarding cabinets with a front cover, the hole pattern in the side walls has to be adjusted accordingly in case of additional tacks being used to stop the front cover 1-2 mm before the front edge of the cabinet.

*Minimum dimension with damping system "Soft Control 2": 40 mm

3

+0,541

+1,0Interior cabinet width

+0,541

Pro-Line II wide drawer(see page 14-17)

Filing map

Vertical graduation system 32 mm.

Minimum dimension with damping system "Soft Control 2": 26 mm

Minimum heightof front cover:

320

271

22

37

64

20

244

19

94

40

30

ø 4,3

20

4,5

43

Interior cabinet depth

Frame depth / Drawer depth

Locking bar

80

3

3

Locking bar

69

Front edge of cabinet = rear edge of front cover*

Regarding cabinets with a front cover, the hole pattern in the side walls has to be adjusted accordingly in case of additional tacks being used to stop the front cover 1-2 mm before the front edge of the cabinet.

32

32

20

320

256

192

128

19

69

3

*

3

A6 crosswise

A4 longwise

A4 crosswiseA5 longwise

A5 crosswise

Swivel plates

+0,541

+1,0Interior cabinet width

+0,541Frame width / Drawer width

Pro-Line II wide drawer(seee page 14-17)

Depth dimensions for installation with front cover.

Interior cabinet depth min. 526 mm

Interior cabinet depth min. 376 mm

Interior cabinet depth min. 326 mm

Frame depth: 480 mm

Frame depth: 330 mm (A4)

Frame depth: 280 mm

Cabinet bracket cutout for slide attachment

Interior cabinet depth min. 431 mm

Frame depth: 385 mm (Foolscap)

Front edge of cabinet = rear edge of front cover* The hole pattern in the side walls has to be adjusted accordingly in case of additional tacks being used to stop the front cover 1-2 mm before the front edge of the cabinet.

min. 2

min. 2

min. 2

Option 1 Option 2

64

64

64

384

448

64

320

256

320

256

37

min. 2

64256

320

64

64

64

192

37

37

Option 1

256

192

37

64

64

Option 2

*

Depth dimensions for installation behind doors.

22

22

22

22

min. 2

min. 2

min. 2

64384

448

64256

320

6437

64256

256

320

320

64192

64

64

64

37

37

256

64192

64

min. 2

Option 1 Option 2

Option 1 Option 2

37

Interior cabinet depth min. 348 mm

Interior cabinet depth min. 398 mm

Interior cabinet depth min. 453 mm

Interior cabinet depth min. 548 mm

Cabinet bracket cutout for slide attachment

Frame depth: 480 mm

Frame depth: 330 mm (A4)

Frame depth: 280 mm

Frame depth: 385 mm (Foolscap)

Front edge of cabinet

Width variations.

Standard Pro-Line II filing frames are configured for single cabinets with 19 mm side walls. However, by inserting spacers they can also be used with row cabinets or even adapted to side walls with 16 mm thickness. This allows the same frame to be used for all cabinet variations.

The spacers are mounted between the cabinet brackets and the cabinet wall. When a locking system is installed, the locking bar is routed between spacer and cabinet bracket.

Single cabinet 16 mm

Row cabinet 19 mm

Row cabinet 16 mm

1616

9,5Spacer 9,5 mm

Spacer 3,0 mm

Spacer 11,0 mm 11,0

3,0

Overall cabinet width e.g. 800 mm

19Interior cabinet width e.g. 762 mm19

Cabinet bracket 17 mm

with spacer 9,5 mm

16 16

19 19

Single cabinet 19 mm

41Frame width e.g. 680 mm

Frame width e.g. 680 mm

Frame width e.g. 680 mm

Frame width e.g. 680 mm

2417

8 Locking bar

Cabinet type Spacer type Demand Article No. UQ

Row cabinet 19 mm Spacer 9,5 mm 2 pieces 092.06667H 20 pcs.

Single cabinet 16 mm Spacer 3,0 mm each 092.06666H 20 pcs.

Row cabinet 16 mm Spacer 11,0 mm side wall 092.06668H 20 pcs.

Locking systems.

Standard locking device

The adaptation to a locking system is possible by means of lock-catch plates which will be mounted on the sides of the filing frame. In the shrouds there are holes for installation with a front cover or behind doors (offset 22 mm). The locking bar will be mounted between the cabinet bracket and the side wall.

One locking device is sufficient

Combined with the parallel guidance "Syncro" one single locking device is sufficient. Grace to the double cog rows with involute toothing the blocking force is similar to a locking system.

20

69

Lehmann Simultan Stop

13

13

69

ø 8Ojmar Sistema 1038

12

14

33

12

69

ø 5Huwil SVS 3

7,5

18,5

7 3

ø 7

69

Pro-Line II filing frame with

parallel guidance "Syncro"

and locking device on the

right-hand side.

6

* Lock-catch plates for the left-hand side available on request

Front edge of cabinet = rear edge of front cover

Description Side Colour Article No. UQ

Lock-catch plate Huwil SVS3 right silver grey 092.06674Z 20 pcs.

Lock-catch plate Lehmann Simultan Stop right silver grey 092.06675Z 20 pcs.

Lock-catch plate Ojmar Sistema 1038 right silver grey 092.06676Z 20 pcs.

Lock-catch plate Standard right silver grey 092.06677H 10 pcs.

Customized solutions.

Standard Pro-Line II filing frames have shrouds for completely concealing the slides.

The variant with half shrouds offers a space savings of 6 mm per side, e.g. for installation behind doors (2).

The variant with mixed shrouds allows it to achieve the required partition also with reduced interior width, e.g. 3 x A4 in cabinets with horizontal shutters (3).

Variant (4) is an alternative when locking mechanisms are not needed.

Locking bar

Locking bar

Locking bar

Standard version

Frame width

4141

17 17

A + B C D

* Basis for interior cabinet width: Single cabinet with 19 mm side walls

Variation with half shroudswith locking system

Variation with mixed shroudswith locking system

Variation with half shroudswithout locking system

17

Frame width

4130,5

6,5

1717

Frame width

4141

6,56,5

Frame width

30,530,5

Further special solutions,

e.g. with integrated blocking

device “Tilt-Control” please

find in our brochure “Filing

frame Basic-Line”.

Cabinet width / Partition Frame width

[mm] (1) (2) (3) (4)

Overall cabinet width 600 mm* 480 562 562 - -

Overall cabinet width 800 mm* 680 762 762 - -

Overall cabinet width 1000 mm* 880 962 962 - -

Overall cabinet width 1200 mm* 1080 1162 1162 - -

Partition 1 x A4 324 406 406 396 385

Partition 2 x A4 or 3 x A5 676 758 758 748 737

Partition 3 x A4 1028 1110 1110 1100 1089

Interior cabinet width

8 8

14 14

4

4

8

4

Accessories for Pro-Line II filing frame.

Cross bar made of steel

Frame depth: 280 / 330 / 385 / 480 mmColour: blackincl. 2 plastic retainersOrder data see page 18

Wire bracket for filing maps

Track width: 330 mm [A4]Finish: galvanisedOrder data see page 19

Index-card box made of steel

Frame depth: 330 / 480 mmColour: blackOrder data see chart below

W [mm]

H [

mm

]Frame depth

FD [mm]Interior widthWI [mm]

Description FD H W WI Article No. UQ

Index-card box A4 crosswise 330 210 333,7 323,7 092.09941H 1 pce.

Index-card box A5 crosswise 330 148 222,5 212,5 092.09943H 1 pce.

Index-card box A6 crosswise 330 105 166,9 156,9 092.09945H 1 pce.

Index-card box A4 crosswise 480 210 333,7 323,7 092.09942H 1 pce.

Index-card box A5 crosswise 480 148 222,5 212,5 092.09944H 1 pce.

Index-card box A6 crosswise 480 105 166,9 156,9 092.09946H 1 pce.

Swivel plate A4 crosswise 333,7 323,7 092.06658H 20 pcs.

Swivel plate A5 crosswise 222,5 212,5 092.06660H 20 pcs.

Swivel plate A6 crosswise 166,9 156,9 092.06662H 20 pcs.

(1)-(4) like Pro-Line II filing frame (see page 5)

(5) Remove the edge profiles

from both front panel and rear panel

(6) Install the drawer insert Fix one border of drawer insert on front panel, then slightly overbend the drawer insert, finally fix other border of drawer insert on rear panel.

Order data for basic equipment see page 18-19

Order data for accessories see page 15-17

Assembly:

By assembling a drawer insert, the Pro-Line II filing frame can be converted into an organizable wide drawer. Thanks to its modular construction there are no different parts necessary for filing frames or wide drawers.

Pro-Line II wide drawer.

Drawer partition for drawer depth 330 mm (A4)

A6

16

0

10

16

0

Ordering examplefor partition 6 x A5:

4 pcs. divider panel 092.06669H3 pcs. divider plate 092.08979H

Ordering examplefor partition 10 x A6:

6 pcs. divider panel 092.06669H5 pcs. divider plate 092.08528H

A5

10212,510

33

0

Ordering examplefor partition 3 x A4:

4 pcs. divider panel 092.06669H

A4

Divider panels and divider plates made of steel, incl. 2 plastic adaptersColour: black - UQ: 20 pieces

Example: Drawer width 680 mm

Accessories for Pro-Line II wide drawer.

Divider plate A5 - Article No. 092.08979H

Divider panel 330 mm - Article No. 092.06669H

Divider plate A6 - Article No. 092.08528H

12 x A68 x A5

4 x A4

A6A5A4

156,8 156,8 10323,710

48

07

21

01

26

22

81

02

42

Ordering examplefor partition 2 x A4 + 2 x A5 + 3 x A6:

4 pcs. divider panel 092.06692H1 pce. divider plate 092.06688H4 pcs. divider plate 092.06689H

Alternative partitions

Accessories for Pro-Line II wide drawer.

Drawer partition for drawer depth 480 mm

Divider panels and divider plates made of steel, incl. 2 plastic adaptersColour: black - UQ: 20 pieces

Example: Drawer width 680 mm

Divider plate A5Artikcle No. 092.06689H

Divider plate A4Article No. 092.06688H

Divider panel 480 mm - Article No. 092.06692H

Index-card formation for drawer depth 330 mm / 480 mm

A5 longwise092.06661H

A6 crosswise092.06662H

156,9

212,5

A5 crosswise092.06660H

A4 longwise092.06659H

1010 323,7 10

A4 crosswise092.06658H

33

0 /

48

0

Ordering examplefor formation 4 x A6 crosswise:

Divider panel 330 mm: 5 pcs. 092.06669HDivider panel 480 mm: 5 pcs. 092.06692HSwivel plate A5 longwise: 092.06661HSwivel plate A6 crosswise: 092.06662H

Ordering examplefor formation 3 x A5 crosswise:

Divider panel 330 mm: 4 pcs. 092.06669HDivider panel 480 mm: 4 pcs. 092.06692HSwivel plate A4 longwise: 092.06659HSwivel plate A5 crosswise: 092.06660H

Ordering examplefor formation 2 x A4 crosswise:

Divider panel 330 mm: 3 pcs. 092.06669HDivider panel 480 mm: 3 pcs. 092.06692HSwivel plate A4 crosswise: 092.06658H

Accessories for Pro-Line II wide drawer.

Divider panels and swivel plates made of steel, incl. 2 plastic adaptersColour: black - UQ: 20 pieces

Example: Drawer width 680 mm

Divider panel 330 mm - Article No. 092.06669HDivider panel 480 mm - Article No. 092.06692H

Wide drawer insert(not illustrated)

*

* interior cabinet depth depending on installation (see page 8-9)

Order data - Basic equipment.

No. Description UQ

280 330 385 480[A4] [Foolscap]

1 055.09490H 055.09491H 055.09492H 055.09493H 5 sets

premounted assembly with rack,

side panel, shroud and 70 mm

self-closing device

2 053.06650 053.06650 053.06650 053.06650 20 pcs.4 pieces each filing frame

3 053.09501H 053.09502H 053.09503H 053.09504H 20 pcs.incl. retainers

Frame depth (mm)

Full extension slide Series 038

Cabinet bracket

Cross bar (optional)

No. Description UQ

324 / 406 480 / 562 680 / 762 880 / 962 1080 / 1162[1 x A4] [2 x A4] [3 x A4]

4 Front panel 053.06950H 053.06710H 053.06711H 053.06917H 053.06712H 10 pcs.

5 Rear panel 053.09494H 053.09000H 053.09001H 053.09002H 053.09003H 10 pcs.

6 Connection rod 053.09323H 053.09341H 053.09342H 053.09343H 053.09344H 10 pcs.premounted assembly

Frame width (mm) / Interior cabinet width (mm)

No. Description UQ

324 / 406 480 / 562 680 / 762 880 / 962 1080 / 1162[1 x A4] [2 x A4] [3 x A4]

Frame width (mm) / Interior cabinet width (mm)

Wide drawer insert 092.09820H 092.09822H 092.09824H 092.09826H 092.09828H 2 pcs.Drawer depth 330 mm

Wide drawer insert 092.09821H 092.09823H 092.09825H 092.09827H 092.09829H 2 pcs.Drawer depth 480 mm

7

Installation with front cover:

Bore holes Ø 5 mm for designer handlesDistance 96/128 mm

Installation behind doors:

PLIIHR1007en

Mounting the front cover supports

Filing frame: Insert support pieces from below into the slot of each side panel.

Wide drawer: Remove edge profiles and screw the support pieces from inside in each side panel with self-tapping screw M3 x 6 mm (Article No. 090.09846).

Mounting the cover caps

The cover caps fix the front panel at the side panels of the filing frame.

Put the cover caps (R/L = right/left) on front panel and front end of shroud; pull the edge profile over both cover caps.

Order data - Accessories.

No. Description Finish Article No. UQ

7 Wide drawer insert black see page 18 2 pcs.Dimensions and order data see page 18

8 Front cover support black 092.06651H 20 pairs

9 Cover cap black 092.06670H 10 pairs

10 Wire bracket for filing maps galvanised 092.06673Z 50 pcs.

We offer our help.

Give us a call or write to us. Together you and your Schock specialist can work out the optimum solution for you.

© 2

01

0 S

cho

ck M

etal

lwer

k G

mb

H -

Su

bje

ct t

o t

ech

nic

al a

men

dm

ent

Schock Metallwerk GmbH Siemensstr. 1-3 D-73660 Urbach Tel. +49 7181 808-0 Fax 808-299 E-mail: info@schock-metall.de Internet: www.schock-metall.de

· · · · ·

+49 7181