Procedura de Conectare La Rețeaua Wireless a UAIC

5/23/2018 Procedura de Conectare La Re eaua Wireless a UAIC

1/9

Procedura de conectare la reeaua wireless a UAICfolosind sistemul de operare Windows XP

Pentru a putea seta conexiunea wireless, calculatorul dv. trebuie sa fie dotat cu un adaptor wireless (placa deretea), driverele corespunzatoare acestuia sa fie instalate corect, in Control Panel -> Network Connectionsinterfata sa fie enable iar adresa IPsa fie obtinuta folosind protocolulDHCP.

Crearea conexiunii de reea presupune parcurgerea urmtorilor pai:

Observaie:Utilizatorii care au deja un cont i o parol de acces n reea vor trece direct la pasul 9 (suntnregistrai n directorul LDAP)

1. Se face click pe icon-ul conexiunii wireless din System Tray, n fereastra Wireless NetworkConnection2. Se selecteaz reeauauaici se apas butonul Connect

3. Reeaua uaic, fiind o reea de tip deschis -open, nu necesit utilizator i parol. Se selecteazopiuneaConnect Anyway.

4. n cateva momente se va realiza conectarea la reeaua uaic. Aceast conexiune va permitenregistrarea dv. ca utilizator al retelei UAIC.

5.6. La deschiderea oricrei pagini web, vei fi redirectai ctre pagina de nregistrare pentru crearea

contului de acces n reea. n cazul n care browser-ul i/sau antivirusul dv. nu permit redirectareaaccesai direct pagina:https://register.uaic.ro

7. Completai cu atenie toate cmpurile formularului de nregistrare corespunztor (angajat / oaspete/student)

8. Completnd formularul de nregistrare, declaraic suntei de acord cuPolitica de SecuritateiPlanulde Securitateale Universitii Alexandru Ioan Cuza. Dup completarea formularului, n maxim 3 zilelucrtoare, datele vor fi prelucrate, iar contul dv. de utilizator va fi creat.

9. Dac nu exist discrepante ntre datele introduse de dvla nregistrare i cele din baza de dateaUniversitii Al. I. Cuza, username-ul cu care v vei autentifica n reea poate fi aflataccesnd, n intervalul celor 3 zile lucrtoare, pagina:https://register.uaic.ro/test-account.php.

10. Dac formularul de nregistrare nu a fost completat corect, solicitarea dv. va fi respins, iarmotivaia poate fi aflat accesnd pagina:https://register.uaic.ro/deleted.php.

11. Dupa ce datele au fost prelucrate si ati obtinut username-ul de acces in retea va trebui sa descarcatisi sa instalati programul de criptare a

conexiunii:https://register.uaic.ro/downloads/SecureW2_TTLS_333.exe12. Instalarea programului SecureW2_TTLS_333.exedecurge astfel:
http://en.wikipedia.org/wiki/Dhcphttp://en.wikipedia.org/wiki/Dhcphttp://en.wikipedia.org/wiki/Dhcphttps://register.uaic.ro/https://register.uaic.ro/https://register.uaic.ro/https://dcd.uaic.ro/?page_id=74https://dcd.uaic.ro/?page_id=74https://dcd.uaic.ro/?page_id=74https://www.dcd.uaic.ro/default.php?t=site&pgid=117&lang=ROhttps://www.dcd.uaic.ro/default.php?t=site&pgid=117&lang=ROhttps://www.dcd.uaic.ro/default.php?t=site&pgid=117&lang=ROhttps://www.dcd.uaic.ro/default.php?t=site&pgid=117&lang=ROhttps://register.uaic.ro/test-account.phphttps://register.uaic.ro/test-account.phphttps://register.uaic.ro/test-account.phphttps://register.uaic.ro/deleted.phphttps://register.uaic.ro/deleted.phphttps://register.uaic.ro/deleted.phphttps://register.uaic.ro/downloads/SecureW2_TTLS_333.exehttps://register.uaic.ro/downloads/SecureW2_TTLS_333.exehttps://register.uaic.ro/downloads/SecureW2_TTLS_333.exehttp://dcd.uaic.ro/wp-content/uploads/2011/01/Wireless-Network-Connection.pnghttps://register.uaic.ro/downloads/SecureW2_TTLS_333.exehttps://register.uaic.ro/deleted.phphttps://register.uaic.ro/test-account.phphttps://www.dcd.uaic.ro/default.php?t=site&pgid=117&lang=ROhttps://www.dcd.uaic.ro/default.php?t=site&pgid=117&lang=ROhttps://dcd.uaic.ro/?page_id=74https://register.uaic.ro/http://en.wikipedia.org/wiki/Dhcp


2/9

Selectai limbajul interfeei i apoi apasai butonulOK:

Pentru a confirma continuarea intalrii, apasai butonulNext:

Apasai butonulI Agree pentru confirmarea i acceptarea liceneiSecureW2

Selectai toate componentele disponibile i apoi apasai butonul Install:
http://dcd.uaic.ro/wp-content/uploads/2011/01/SecureW2_components.pnghttp://dcd.uaic.ro/wp-content/uploads/2011/01/SecureW2_license.pnghttp://dcd.uaic.ro/wp-content/uploads/2011/01/SecureW2_setup.pnghttp://dcd.uaic.ro/wp-content/uploads/2011/01/SecureW2-Language1.pnghttp://dcd.uaic.ro/wp-content/uploads/2011/01/SecureW2_components.pnghttp://dcd.uaic.ro/wp-content/uploads/2011/01/SecureW2_license.pnghttp://dcd.uaic.ro/wp-content/uploads/2011/01/SecureW2_setup.pnghttp://dcd.uaic.ro/wp-content/uploads/2011/01/SecureW2-Language1.pnghttp://dcd.uaic.ro/wp-content/uploads/2011/01/SecureW2_components.pnghttp://dcd.uaic.ro/wp-content/uploads/2011/01/SecureW2_license.pnghttp://dcd.uaic.ro/wp-content/uploads/2011/01/SecureW2_setup.pnghttp://dcd.uaic.ro/wp-content/uploads/2011/01/SecureW2-Language1.pnghttp://dcd.uaic.ro/wp-content/uploads/2011/01/SecureW2_components.pnghttp://dcd.uaic.ro/wp-content/uploads/2011/01/SecureW2_license.pnghttp://dcd.uaic.ro/wp-content/uploads/2011/01/SecureW2_setup.pnghttp://dcd.uaic.ro/wp-content/uploads/2011/01/SecureW2-Language1.png


3/9

Dup efectuarea cu succes a instalrii repornii calculatorul apsnd butonulFinish:

13. Dupa instalarea aplicaieiSecureW2 EAP Suite, pentru a configura o conexiune wireless facei click

peicon-ul acesteia din System Tray, apoi n fereastrea Wireless NetworkConnectionselectaiChange advanced settings:

14. n fereastra Wireless Network Connection Propertiesselectai tab-ul Wireless Networks:
http://dcd.uaic.ro/wp-content/uploads/2011/01/wncp_wn1.pnghttp://dcd.uaic.ro/wp-content/uploads/2011/01/Wireless-Network-Connection-2.pnghttp://dcd.uaic.ro/wp-content/uploads/2011/01/SecureW2_reboot.pnghttp://dcd.uaic.ro/wp-content/uploads/2011/01/wncp_wn1.pnghttp://dcd.uaic.ro/wp-content/uploads/2011/01/Wireless-Network-Connection-2.pnghttp://dcd.uaic.ro/wp-content/uploads/2011/01/SecureW2_reboot.pnghttp://dcd.uaic.ro/wp-content/uploads/2011/01/wncp_wn1.pnghttp://dcd.uaic.ro/wp-content/uploads/2011/01/Wireless-Network-Connection-2.pnghttp://dcd.uaic.ro/wp-content/uploads/2011/01/SecureW2_reboot.png


4/9

15. n tab-ul Wireless Networksselectai opiuneaUse Windows to configure my wireless

network settings,apoi apasai butonulAdd

16. n tab-ulAssociationcompletai opiunile necesare conexiunii:La rubricaNetwork name(SSID)scrieti:

wlcadredac suntei cadru didactic. wlstuddac suntei student. wladmin dac v desfasurati activitatea n cadrul serviciilor administrative ale oricrei

faculti.

wladmdac v desfaurai activitatea n cadrul serviciilor administrative ale universitii. wlextrapentru orice alt persoan fizic sau juridic care are contacte cu universitatea i

beneficiaz de un cont de acces n reea.

17. Selectai opiuneaConnect even if the network is not broadcasting18. Pentru Network Authenticationselectai opiuneaWPA2

Observatie: Dac opiuneaWPA2nu este disponibil va trebui s descrcai i s instalai update-ul:https://register.uaic.ro/downloads/WindowsXP-KB893357-v2-x86-ENU.exe

1. Pentru Data Encryptionselectai opiuneaAES2. NU selectai opiuneaThis is a computer-to-computer (ad-hoc) network; wireless access points

are not used
https://register.uaic.ro/downloads/WindowsXP-KB893357-v2-x86-ENU.exehttps://register.uaic.ro/downloads/WindowsXP-KB893357-v2-x86-ENU.exehttps://register.uaic.ro/downloads/WindowsXP-KB893357-v2-x86-ENU.exehttp://dcd.uaic.ro/wp-content/uploads/2011/01/wnp_associations.pnghttp://dcd.uaic.ro/wp-content/uploads/2011/01/wncp_wn1.pnghttp://dcd.uaic.ro/wp-content/uploads/2011/01/wnp_associations.pnghttp://dcd.uaic.ro/wp-content/uploads/2011/01/wncp_wn1.pnghttps://register.uaic.ro/downloads/WindowsXP-KB893357-v2-x86-ENU.exe


5/9

3. n tab-ulAuthenticationselectai opiuneaEnable IEEE 802.1x authentication for this network,pentru EAP type:selectaiSecureW2 EAP-TTLS,apoi apasai butonulProperties

4. Vom configura parametrii folosii de programulSecureW2.

o n fereastra SecureW2 Configuration apasai butonul Configure
http://dcd.uaic.ro/wp-content/uploads/2011/01/SecureW2_configure.pnghttp://dcd.uaic.ro/wp-content/uploads/2011/01/wnp_authetication.pnghttp://dcd.uaic.ro/wp-content/uploads/2011/01/SecureW2_configure.pnghttp://dcd.uaic.ro/wp-content/uploads/2011/01/wnp_authetication.png


6/9

o n tab-ul Connectionbifai doar opiuneaEnable session resumption (quick connect)

o n tab-ul Certificatesbifai opiunileVerify server certificateiVerify server name. Pentru

numele serverului folosiionix.uaic.ro, apoi apasai butonulAdd CA
http://dcd.uaic.ro/wp-content/uploads/2011/01/SecureW2_certificates_add.pnghttp://dcd.uaic.ro/wp-content/uploads/2011/01/SecureW2_certificates.pnghttp://dcd.uaic.ro/wp-content/uploads/2011/01/SecureW2_connection.pnghttp://dcd.uaic.ro/wp-content/uploads/2011/01/SecureW2_certificates.pnghttp://dcd.uaic.ro/wp-content/uploads/2011/01/SecureW2_connection.pnghttp://dcd.uaic.ro/wp-content/uploads/2011/01/SecureW2_certificates_add.png


7/9

o n fereastra SecureW2 Add Trusted Root CAselectai certificatulAddTrust External CA

Root,apoi apasai butonulAdd CA

o La final, tab-ul Certificatesarat astfel:
http://dcd.uaic.ro/wp-content/uploads/2011/01/SecureW2_certificates_done1.pnghttp://dcd.uaic.ro/wp-content/uploads/2011/01/SecureW2_certificates_add1.pnghttp://dcd.uaic.ro/wp-content/uploads/2011/01/SecureW2_certificates_done1.pnghttp://dcd.uaic.ro/wp-content/uploads/2011/01/SecureW2_certificates_add1.png


8/9

o n tab-ulAuthentication, pentru cmpul Select Authentication Method,selectai valoareaPAP

o n tab-ul User accountputei bifa opiuneaPrompt user for creditentials, caz n care la fiecare

autentificare vei introduce manual numele de utilizator i parola sau putei completa direct, cuvalorile corespunzatoare, cmpurile Username, Passwordsi Domain(pentrucmpul Domainfolosii numeleuaic.ro). n cel de al doilea caz, att numele de utilizator ct iparola, acestea vor fi memorate i nu va mai fi necesar reintroducerea lor ori de cate ori v veiconecta la retea.

o Apsai butonul Advanced
http://dcd.uaic.ro/wp-content/uploads/2011/01/SecureW2_user_account.pnghttp://dcd.uaic.ro/wp-content/uploads/2011/01/SecureW2_authetication.pnghttp://dcd.uaic.ro/wp-content/uploads/2011/01/SecureW2_user_account.pnghttp://dcd.uaic.ro/wp-content/uploads/2011/01/SecureW2_authetication.png


9/9

o n fereastra SecureW2 Advancedbifai opiunea Allow users to setup newconnection,apoi apasai butonul OK

o Folosii butonulOKpentru a nchide tab-ul User account,apoi fereastra SecureW2

Configuration.

5. n acest moment fereastra activa este Wireless Network Properties.Dac dorii ca aceastconexiunes fie facut automat, selectai tab-ul Connection,apoi opiuneaConnect when this network is in

range.

6. Folosii butonul OK pentru a nchide fereastreleWireless Network PropertiesiWireless NetworkConnection Properties.

7. n acest moment conexiunea dv. este configurat i putei folosi reeaua wireless cu ssid -ul corespunzatorstatutului dv.
http://dcd.uaic.ro/wp-content/uploads/2011/01/wnp_connection.pnghttp://dcd.uaic.ro/wp-content/uploads/2011/01/SecureW2_advanced.pnghttp://dcd.uaic.ro/wp-content/uploads/2011/01/wnp_connection.pnghttp://dcd.uaic.ro/wp-content/uploads/2011/01/SecureW2_advanced.png

Documents

Procedura de Conectare La Rețeaua Wireless a UAIC