Upload
others
View
8
Download
0
Embed Size (px)
Citation preview
Proceedings of the ASME
International Mechanical Engineering
Congress and Exposition
- 2013 -
VOLUME 9
MECHANICS OF SOLIDS, STRUCTURES AND FLUIDS
presented at
ASME 2013 INTERNATIONAL MECHANICAL ENGINEERING CONGRESS AND EXPOSITION
NOVEMBER 15-21, 2013
SAN DIEGO, CALIFORNIA, USA
ASME
Two Park Avenue * New York, N.Y. 10 016
CONTENTS
MECHANICS OF SOLIDS, STRUCTURES AND FLUIDS
j COMPOSITE MATERIALS FOR RENEWABLE ENERGY SYSTEMS
IMECE2013-63035 V009T10A001
Shear Modulus Degradation in Fiber Reinforced Laminates
M. Salavatian and L. V. Smith
IMECE2013-65549 V009T10A002
A Numerical Analysis of the Solar Panel Support Structure on the Weak Ground
Joo Kang Woo, Jun Kim Young, Park Kyu Tae, and Kim Kwang Sun
IMECE2013-65638 V009T10A003
Effect of Externally Applied Stresses on the Moisture Diffusion Characteristics of
Epoxy Glass CompositesMark T. Stoffels and David A. Miller
IMECE2013-65647 V009T10A004
Numeric Investigation of Fluid Solid Interaction on Wind Turbine Blade
Mohammad A. Hossain, Kyoungsoo Lee, Ziaul Huque, and Raghava R. Kommalapati
DURABILITY AND LIFE PREDICTION OF ADVANCED
COMPOSITE MATERIALS
IMECE2013-63415 V009T10A005
Environmental Durability of Natural Fiber Reinforced Unsaturated Polyester Composite
Mengyuan Liao, Umaru Semo Ishiaku, Zainal Arifin Mohd Ishak, Guijun Xian, and
Hiroyuki Hamada
IMECE2013-63727 V009T10A006
Flow Accelerated Degradation of Corrosion Protective Organic CoatingsQixin Zhou and Yechun Wang
IMECE2013-64436 V009T10A007
A New Approach in Kinetic Modeling Using Thermodynamic Framework for Chemically
Reacting Systems and Oxidative Ageing in Polymer CompositesK. V. Mohankumar and K. Kannan
IMECE2013-64475 V009T10A008
Mechanical Property and Degradation in Hot Water of Injection Molded Glass Short
Fiber/Wood Powder/Polypropylene Hybrid Composites
Xujie Kong, Ying Yu, Yuqiu Yang, Jungang Li, Mengyuan Liao, and Manabu Nomura
IMECE2013-65671 V009T10A009
Durability Study of Low Velocity Impact Responses of Conventional and Nanophased CFRP
Composites Exposed to Seawater
Mohammad K. Hossain, Md. Mahmudur R. Chowdhury, Kazi A. Imran, Mahmud B. Salam,
Mahesh Hosur, and Shaik Jeelani
vii
S
IMECE2013-66771 V009T10A010
Recovery of Low-Velocity Impact Properties of Glass Fiber Reinforced Composites Through
Self-Healing TechniqueShaik Zainuddin, Arifin Tauhid, Mahesh V. Hosur, Shaik Jeelani, and Ashok Kumar
FAILURE MECHANICS OF ADVANCED MATERIALS AND STRUCTURES
IMECE2013-66566 V009T10A011
Stochastic Multiscale Modeling and Damage Progression for Composite Materials
Joel Johnston and Aditi Chattopadhyay
IMECE2013-66836 V009T10A012
Modification of Pullout Behavior of Kevlar Fabric by Zinc Oxide Nanowire Reinforcement
Hyun-Sik Hwang, Brendan A. Patterson, Mohammad H. Malakooti, and Henry A. Sodano
FATIGUE AND FRACTURE OF ENGINEERING MATERIALS AND STRUCTURES
IMECE2013-63163 V009T10A013
Fatigue Crack Growth Analysis of Mild Steel Plate Welded by Friction Stir WeldingK. N. Pandey and Saurabh Kumar Gupta
IMECE2013-63779 V009T10A014
Fatigue Behavior of Pt-20%lr Coils Used as Implanted Electrodes in Medical Devices
Haitao Zhang and Bernard Q. Li
IMECE2013-63961 V009T10A015
A Parametric Study on Failure of Pin-Loaded Unidirectional-Woven Composite Joints
O. Aluko
IMECE2013-64314 V009T10A016
Effect of Alloying Elements on Creep and Fatigue Damage of Ni-Base Superalloy Caused byStrain-Induced Anisotropic Diffusion
Ken Suzuki, Tomohiro Sano, and Hideo Miura
IMECE2013-65388 V009T10A017
Maximizing Strength of Bimaterial Interfaces
P. Nasiri and Gary F. Dargush
IMECE2013-65583 V009T10A018
Incorporating Micro-Thermo-Mechanical Damage Model in Life Prediction Analysis of a
Turbine Engine Blade to Disk Attachment
Sam Naboulsi
IMECE2013-66076 V009T10A019
Experimental and Numerical Investigation of Plasticity-Induced Fatigue Crack Closure in
Overmatched Welds
Diego F. B. Sarzosa and Claudio Ruggieri
IMECE2013-66202 V009T10A020
Transition From Low Cycle to High Cycle in Uniaxial FatigueMohamed E. M. El-Sayed
viii
GENERAL
IMECE2013-63183 V009T10A021
Free Vibration Analysis of Rotating Structures by One-Dimensional, Variable Kinematic Theories
Erasmo Carrera, Matteo Filippi, and Enrico Zappino
IMECE2013-64787 V009T10A022
Dynamic Stability and Natural Frequency of Composite Corrugated Bellow Expansion Joint
Sujana Rao Nakkanti, Radhakrishna Madabhushi, and Murali Krishna Prasad Adusumilli
IMECE2013-65119 V009T10A023
Ac Electrothermal Pumping Improvement by Biocompatible NanocompositeSurface Modification
Nazmul Islam and Davood Askari
IMECE2013-65202 V009T10A024
Integration of Carbon Nanotubes Into a Fiberglass Reinforced Polymer Composite and its
Effects on Electromagnetic Shielding and Mechanical PropertiesMehran Tehran!, Ayoub Y. Boroujeni, Majid Manteghi, Zhixian Zhou, and Marwan Al-Haik
IMECE2013-65396 V009T10A025
Elastoplastic Analysis of a Cantilever Beam Under Combined Compressive and Bending Load
Julio A. Boix Salazar, Dirk F. de Lange, Alberto Torres Cruz, Hugo I. Medellin Castillo, and
Gilberto Mejia Rodriguez
IMECE2013-65599 V009T10A026
Multifunctional Hierarchical Nanocomposites: A Review
Mehrdad N. Ghasemi-Nejhad
IMECE2013-65664 V009T10A027
Tensile Properties Evaluation of Chemically Treated/Untreated Single Sugarcane Fiber
Mohammad K. Hossain, Mohammad R. Karim, Mahmudur R. Chowdhury,Muhammad A. imam, Mahesh Hosur, Shaik Jeelani, and Ramsis Farag
IMECE2013-66146 V009T10A028
Deployment Driving Analysis of Deployable Structure Considering Imperfections
Hongwei Guo, Rongqiang Liu, and Zongquan Deng
IMECE2013-66679 V009T10A029
Prediction of Elastic Modulus of Glass Short Fiber/Wood Powder/Polypropylene
Hybrid Composites
Ying Yu, Manabu Nomura, and Hiroyuki Hamada
HIGH STRAIN-RATE PHENOMENA: MODELING AND EXPERIMENT
IMECE2013-62283 V009T10A030
Energy Absorption Mechanisms in Hard Epoxy Resin Matrix Composite Laminates Subjected to
Dynamic Loading Events
David B. Segala and Paul V. Cavallaro
IMECE2013-63522 V009T10A031
Dynamic Response of Corrugated Sandwich Plates Under Shock Tube Loading
Jeong-Ho Kim, Linhui Zhang, Jefferson T. Wright, Rainer Hebert, and Arun Shukla
IX
i:i
IMECE2013-64770
Interfacial Shear Strength of Banana Fiber in Low-Density PolyethyleneJoshua D. Weed and William Jordan
V009T10A032
IMECE2013-65642 V009T10A033
3-D Characterization of Global and Local Microstructural Effects on Spall Damage in Shoe
Loaded FCC Metals: Experiments and ModelingA. Brown, K. Krishnan, L. Wayne, P. Peralta, S. N. Luo, D. Byler, and B. Patterson
HYBRID MULTIFUNCTIONAL COMPOSITE MATERIALS
IMECE2013-62251 V009T10A034
Mechanical Characterization of a Hybrid Carbon Nanotube/Carbon Fiber Reinforced Composite
Mehran Tehrani, Ayoub Y. Boroujeni, Ramez Ha]], and Marwan Al-Haik
IMECE2013-63071 V009T10A035
Multi-Objective Optimization of Axial Crush Performance of Square Metal-Composite
Hybrid Tubes
Roozbeh Kalhor, Hossein Akbarshahi, and Scott W. Case
IMECE2013-63326 V009T10A036
Temperature Dependent Viscoelastic Behavior of FRP/ZnO Nano-Rods Hybrid Nanocomposites
Amir Alipour Skandani, Ayoub Yari Boroujeni, and Marwan Al-Haik
IMECE2013-65791 V009T10A037
Vibration Damping Enhancement of Fiber Reinforced Polymer Composites with Surface Grown
Zinc Oxide Nanorods
Nejib Masghouni and Marwan Al-Haik
IMECE2013-66509 V009T10A038
Effect of Zinc Oxide Nanowire Length on the Interfacial Strength of Carbon Fiber CompositesBrendan A. Patterson and Henry A. Sodano
MATERIALS AND META-MATERIALS AT VARYING LENGTH SCALES AND
FREQUENCY RANGES
IMECE2013-63992 V009T10A039
Investigating the Effects of the Friction Coefficient and Tool Geometry on the Cup
Thickness in the Deep Drawing Process of SPXI250 AlloyIman Rostamsowlat, Ahmad Afsari, and Maziar Janghorban
IMECE2013-65475 V009T10A040
Topology Optimization for the Single Phase Flow Using Two Point Flux Approximation Model
Guang Dong and Yulan Song
IMECE2013-65533 V009T10A041
A Lattice Boltzmann Approach for Directional Transporting of Droplets Using HeterogeneousSurface Roughness
Jung Shin Lee and Joon Sang Lee
IMECE2013-66720 V009T10A042
Investigation of Some Circular Membrane-Patch Acoustic Meta-Materials
Emmanuel Ay'orinde, Mohammad Al-Zubi, Fouad Mohammad, and Mehmet Akif Dundar
x
IMECE2013-66722
Plate Vibration and Geometry Study of Impact-Control ABS
Mehmet Akif Dundar and Emmanuel Ayorinde
V009T10A043
MECHANICS AND DESIGN OF CELLULAR MATERIALS
IMECE2013-62113 V009T10A044
Study of Impact Properties of a Fluid-Filled Honeycomb Structure
J. Clark, S. Jenson, J. Schultz, J. Hoffman, S. Takak, M. AH, and Tessa Matthews
IMECE2013-63598 V009T10A045
Cellular Materials With Extremely High Negative and Positive Poisson's Ratios:
A Mechanism Based Material DesignKwangwon Kim, Jaehyung Ju, and Doo-Man Kim
IMECE2013-64190 V009T10A046
Micromechanical Modeling of Two-Dimensional Periodic Cellular Materials
Khalid Alzebdeh, Abdullah Al-Shabibi, and Tasneem Pervez
IMECE2013-64914 V009T10A047
An Experimental Study on the Mode I Fracture Behavior of Hexagonal HoneycombsMd Salah Uddin, Jaehyung Ju, and Nandika D'Souza
IMECE2013-65101 V009T10A048
The Role of Water in the Hygro-Thermo-Mechanical Behavior of Wood
Dominique Derome, Alessandra Patera, Ahmad Rafsanjani, Saeed Abbasion, and
Jan Carmeliet
IMECE2013-66684 V009T10A049
Evaluation of Mechanical Properties of Paper Tubes
Takanori Kitamura, Mitsunori Suda, Kanta Ito, Suguru Teramura, Zhiyuan Zhang, and
Hiroyuki Hamada
MECHANICS OF BIOLOGY AND MEDICINE
IMECE2013-63229 V009T10A050
Tissue- and Cell-Level Stress Distributions of the Heart Valve Tissue During Diastole
Siyao Huang and Hsiao-Ying Shadow Huang
IMECE2013-63534 V009T10A051
Numerical Modelling and Experimental Validation of Intervertebral Discs
Marzieh Azarnoosh, Marcus Stoffel, and Dieter Weichert
IMECE2013-63829 V009T10A052
A Biomechanical Study of Directional Mechanical Properties of Porcine Skin Tissues
Hsiao-Ying Shadow Huang, Siyao Huang, Taylor Gettys, Peter M. Prim, and Ola L. Harrysson
IMECE2013-64498 V009T10A053
Bioreactor Development for Cultivating Tenocytes on Collagen Foils Supported byConstitutive Modelling
Wolfgang Willenberg, Marcus Stoffel, and Dieter Weichert
xi
IMECE2013-66383 V009T10A054
Axisymmetric Model of an Intracranial Saccular Aneurysm: Theory and Computation
Colin W. Curtis and Michael L Calvisi
MECHANICS OF SOLFT MATERIALS
IMECE2013-63839 V009T10A055
Mechanics of Air-Inflated Drop Stitch Fabric Panels Subject to Bending Loads
Paul V. Cavallaro, Christopher J. Hart, and AH M. Sadegh
IMECE2013-64014 V009T10A056
Environmental Effects on Flexural Over-Strength Factor of Epoxy Resin Materials
Masoud Yekani Fard, Aditi Chattopadhyay, and Brian Raji
IMECE2013-64344 V009T10A057
Effect of Swelling Behavior on Elastomeric Materials: Experimental and Numerical Investigation
Sayyad Zahid Qamar, Maaz Akhtar, and Moosa S. M. Al-Kharusi
MODELING AND MULTIFUNCTIONAL MATERIALS
IMECE2013-66451 V009T10A058
Non-Linear Dynamic Magneto Electric Effects in Ferromagnetic-Ferroelectric
Layered CompositesSatenik Harutyunyan and Davresh Hasanyan
IMECE2013-66763 V009T10A059
Failure and Sensitivity Analysis of MEMS Based Piezo-Resistive Fingerprint Sensor
Adarsh Venkataraman Ganesan and Sundaram Swaminathan
MULTI-FIELD STUDIES IN HETEROGENEOUS MATERIALS: EXPERIMENTAL,
THEORETICAL AND NUMERICAL APPROACHES
IMECE2013-63282 V009T10A060
Improvement on the Analysis of a Finite Element Composites Model
Atanas A. Atanasov, Thomas J. Wright, and John P. Parmigiani
IMECE2013-63736. V009T10A061
Tailored Polyurea-Glass Interfaces and the Characterization by the Single-Fiber FragmentationZhanzhan Jia, Ravish Rawal, Jon Isaacs, and Sia Nemat-Nasser
IMECE2013-63993 V009T10A062
Experimental and Numerical Techniques to Characterize Structural Properties of
Fresh Concrete
Tony Di Carlo, Behrokh Khoshnevis, and Anders Carlson
IMECE2013-66344 V009T10A063
A Hierarchical Model for Kevlar Fiber Failure
Stephen S. Recchia, Assimina Pelegri, Jan K. Clawson, Korhan Sahin, loannis Chasiotis, and
James Zheng
xii
MULTIFUNCTIONAL AND MICRO/NANO-STRUCTURED MATERIALS:
MODELING AND CHARACTERIZATION
IMECE2013-62427 V009T10A064
Multiscale Analysis of Multifunctional Composite Structures
Yehia Bahei-EI-Din and Amany Micheal
IMECE2013-62602 V009T10A065
A Numerical Model to Study the Effect of Temperature on Electrical Conductivity of
Polymer-CNT NanocompositesAmirhossein B. Oskouyi, Uttandaraman Sundararaj, and Pierre Mertiny
IMECE2013-63744 V009T10A066
Study of Microstructure and Mechanical Properties of Yttrium Stabilized Zirconia CoatingDeposited by Air Plasma SprayChris P. Leither, Lauren E. Roy, Fardad Azarmi, and X. W. Tangpong
IMECE2013-63843 V009T10A067
Mechanical Characterization of Healable Cross-Ply CompositesChristian Nielsen and Sia Nemat-Nasser
MULTI-PHYSICS SIMULATIONS AND EXPERIMENTS FOR SOLIDS
IMECE2013-62519 V009T10A068
A Thermoplastic Constitutive Modeling and Geotechnical Centrifuge Simulation of PartiallySaturated Soil Under Buried Explosive LoadingAsghar Yarahmadi, Rebecca Brannon, and Carlos Bonifasi Lista
IMECE2013-62918 V009T10A069
Investigation on Field-Response Performance of Magnetic-Sensitive Rubber by ImpactExperiments With Adjustable Magnetic Fields
Yi Cheng, Lingyu Sun, Weiwei Chen, Dingxin Leng, Zhongheng Guo, and Dengfeng Wang
IMECE2013-65048 V009T10A070
Modeling the Circular Shear in Light Activated Shape Memory Polymers With Three Networks
Fangda Cui and I. J. Rao
IMECE2013-65356 V009T10A071
Variational Integrators for PiezoelectricityP. Nasiri and Gary F. Dargush
IMECE2013-65584 V009T10A072
Ductile Failure in Processed Thin Sheet Metals
Huafeng Ding, Caichao Zhu, Zhong Zhou, and Dong Qian
MULTI-SCALE COMPUTATIONS IN FLUIDS, STRUCTURES, AND MATERIALS
IMECE2013-64642 V009T10A073
Concurrent Multiple-Time-Scale Simulations With Improved Numerical Dissipation for
Structural Dynamics
Tejas Ruparel, Azim Eskandarian, and James Lee
xiii
MULTISCALE MODELING OF FATIGUE DAMAGE AND FAILURE MECHANICS
IMECE2013-65222 V009T10A074
A Probabilistic Strength Distribution Model in Predicting Damage Evolution Due to
Thermo-Oxidation of Polymeric Matrix Composites
Jianyong Liang and Kishore Pochiraju
IMECE2013-66084 V009T10A075
Atomistic Simulation of Fatigue Crack Growth in Single Crystal Aluminum
Enqiang Lin and Yongming Liu
IMECE2013-66221 V009T10A076
Toward Improving Fracture Toughness of Particle-Reinforced Polymer Matrix CompositesKeyanoush Sadeghipour, Wenhai Wang, and George Baran
NANOCOMPOSITES SYNTHESIS AND PERFORMANCE
IMECE2013-64946 V009T10A077
Development of Novel 'Duplex NiCr-Coated' Nanostructured HVOF WC-17Ni(80/20)Cr
Coatings for Severe Wear ApplicationsGobinda C. Sana, TarekA. ben Mahmud, and Tahir I. Khan
IMECE2013-65060 V009T10A078
Analytical Modeling of Mechanical Properties and Behavior of Nanotube-Based
NanocompositesDavood Askari, Mehrdad N. Ghasemi-Nejhad, and Alexander L. Kalamkarov
IMECE2013-65879 V009T10A079
Investigation of Mechanical Properties of Nanoclay Incorporated Room TemperatureVulcanized (RTV) Silicone Foams
Kaji Fuad, Bipul Barua, Mrinal C. Saha, Thomas Robison, and Sabrina Wells
IMECE2013-66410 V009T10A080Effect of Sizing Removal Method and POSS Coating on Flexural Properties of Carbon
Fiber Epoxy CompositesFariz Ibn Afzal, Mrinal C. Saha, and M. Cengiz Altan
NANOENGINEERED, HIERARCHICAL, AND MULTI-SCALE MATERIALS
IMECE2013-64978 V009T10A081
Multiscale Modeling of Nano-Reinforced Structural Adhesive Bonds
Jacob M. Wernik and ShakerA. Meguid
NANOSCALE MECHANICS OF POLYMER NANOCOMPOSITES AND
NANOSTRUCTURED MATERIALS
IMECE2013-62439 V009T10A082Multiscale-Based Simulations of Longitudinal Mechanical Behaviors of Single-Walled CarbonNanotubes Reinforced Polymer NanocompositesJames Han, Yu-Fu Ko, and Hsien-Yang Yeh
xiv
IMECE2013-64955
On the Time Dependence of Size Effect in PolydimethylsiloxaneF. Alisafaei, Seyed Hamid Heza Sanei, E. J. Smith, and Chung-Souk Han
V009T10A083
IMECE2013-65588 V009T10A084
Thermo-Mechanical Analysis of Structural Elements Incorporating NanocompositesZeaid Hasan and Aditi Chattopadhyay
PLENARY SESSION IN MECHANICS OF SOLIDS, STRUCTURES, AND FLUIDS
IMECE2013-62239 V009T10A085
On Smoothed Finite Element Methods
G. R. Liu
IMECE2013-63601 V009T10A086
Acoustic Fluid-Structure Interaction
Lothar Gaul
SIZE SCALE EFFECTS IN FRACTURE PROCESS
IMECE2013-62916 V009T10A087
Investigation of Scaling Effects on Post-Fatigue Residual Strength of Nanoclay Added
GFRP CompositesNijagal Shanthaveeraradhya Kavitha and Raghu V. Prakash
IMECE2013-64976 V009T10A088
Fracture Toughness Variation Induced by Geometric Confinement in Nanostructures
Shao-Huan Cheng and C. T. Sun
SYMPOSIUM ON APPLICATIONS AND CHALLENGE IN FULL-FIELD
EXPERIMENTAL METHODS
IMECE2013-62332 V009T10A089
Buckling Measurement of Cylindrical Shells by Digital Image Correlation Method
Tzu-Yu Kuo, Wei-Chung Wang, Chun-I Chu, Jia-He Chen, Te-Heng Hung, and
Jen-Yuan (James) Chang
IMECE2013-63512 V009T10A090
Effect of Polyurethane Surface Treatment on Basalt Fiber CompositeTing Yang, Mengyuan Liao, Zhenjin Cui, and Yuqiu Yang
IMECE2013-64584 V009T10A091
Computation of Elastic Constants of Functionally Graded Materials Using the EigenfunctionVirtual Fields Method
Nigamaa Nayakanti and S. J. Subramanian
SYMPOSIUM ON FRACTURE AND LIFETIME OF MATERIALS IN HONOR OF
A. CHUDNOVSKY 75 BIRTHDAY
IMECE2013-62299 V009T10A092
Pre Yield Shear in Glasses
Alexander Patashinski
xv
IMECE2013-62501 V009T10A093
New Insights Into Controlling Sub-Micron Failure Mechanisms in Composites Using Discrete
Functionalized Multiwall Carbon Nanotubes
Clive Bosnyak, Douglas Hunter, Andrew Stewart, Kurt Swogger, and Zhenwen Zhou
IMECE2013-62536 V009T10A094
On Utilization of Material Failure Criterion in Modeling Pull-Out Failure of Spot-Welded Joints
Long Zeng, Yong Xia, He Zhao, and Qing Zhou
IMECE2013-62607 V009T10A095
Random Vibration Fatigue: Frequency Domain Critical Plane ApproachesGiovanni de Morais Teixeira, Radwan Hazime, John Draper, and Dewi Jones
IMECE2013-62988 V009T10A096
Analysis and Life Testing for Design of Cryogenic Bearing Assemblies on the James Webb
Space Telescope Optical Telescope Element
John W. Evans, Allison Barto, Benjamin Gallagher, Paul Finley, Mat Samuel, and Jacob Burke
IMECE2013-63039 V009T10A097
Application of Crack Layer in Modeling of Slow Crack Growth in High-Density Polyethylene
Haiying Zhang, Zhenwen Zhou, and Alexander Chudnovsky
IMECE2013-63062 V009T10A098
Damage and Failures of CGA/BGA Assemblies Under Thermal Cycling and Dynamic Loadings
Reza Ghaffarian
IMECE2013-63417 V009T10A099
Observation and Evaluation of Scratch Damage Characteristics of Injection Molded, Rubber
Toughened Poly(Methylmethacrylate)Jihun An, Byung-Hyun Kang, Byoung-Ho Choi, and Hyoung-Jun Kim
IMECE2013-64485 V009T10A100
Applying an Energy-Based Fatigue Life Prediction Method to Unnotched and Notched
AL6061-T6 SpecimenSepehr Nesaei, Todd Letcher, and Fereidoon Delfanian
IMECE2013-64684 V009T10A101
Hysteresis Strain Energy Behavior of AI6061-T6 With Multi-Fatigue Load Levels as Applied to an
Energy-Based Fatigue Life Prediction Method
Todd Letcher, Sepehr Nesaei, CodyAuen, Matt Nielsen, and Fereidoon Delfanian
IMECE2013-64957 V009T10A102
Chemical Affinity Tensor and Stress-Assist Chemical Reactions Front Propagation in Solids
Alexander B. Freidin
IMECE2013-65353 V009T10A103
The J and M Integrals for a Cylindrical Cavity in a Time-Harmonic Wave Field
B. Y. Gommerstadt
IMECE2013-65844 V009T10A104
Damage Quantification Using Wave Propagation Data With Integrated Numerical and
Experimental ApproachZahra Heidary and Didem Ozevin
xvi
SYMPOSIUM ON MECHANICS OF ADHESION AND FRICTION
IMECE2013-64166 V009T10A105
Boundary Element Analysis of Adhesion Considering Van Der Waals Force
Hideo Koguchi and Kyohei Seki
IMECE2013-64324 V009T10A106
The Influence of the Roughness Parameters on the EHL Line Contact Using the
Free Volume Model
Vincenzo D'Agostino, Vincenzo Petrone, and Adolfo Senatore
IMECE2013-64348 V009T10A107
Elastomer Seal With Frictional Contact: Analytical Solution
Moosa S. M. Al-Kharusi, Sayyad Zahid Qamar, Tasneem Pervez, and Maaz Akhtar
IMECE2013-65254 V009T10A108
A Virtual Tool for Wear Simulation of Plastic Gear Pairs
F. Karpat, S. Ekwaro-Osire, C. Yuce, and E. Karpat
SYMPOSIUM ON MECHANICS OF INTEGRATED STRUCTURES AND
MATERIALS IN ADVANCED TECHNOLOGIES
IMECE2013-64849 V009T10A109
Investigation of Frictional Effects on Buckling Behavior of Drill StringJamil Abdo, Hamed Al-Sharji, Danish Haneef, and Khalid Alzebdeh
Author Index xix
xvii