Embed Size (px)
Citation preview
Heat and Mass Transfer 2006
Proceedings of the
18th National & 7th ISHMT-ASMEHeat and Mass Transfer Conference
January 4-6, 2006
Indian Institute of Technology
Guwahati, India
In Cooperation with Coordinating Scientists
F. Arinc, TurkeyB. Courtois, France
F. Durst, GermanyS. V. Garimella, USA
M. Ishizuka, JapanM. Kawaji, Canada
S. J. Kim, Korea
J. Lohan, Ireland
C. V. Madhusudana, Australia
S. C. Mishra, India
B.Palm, Sweden
B. V. S. S. S. Prasad, India
A. T. Prata, Brazil
K. N. Seetharamu, MalaysiaR. K. Shah, USA
R. J. Shyu, Taiwan
W. Q. Tao, China
K. C. Toh, SingaporeL. L. Vasiliev, Belarus
V.V.Wadekar.UK
Editors
Subhash C. Mishra
Dept. of Mechanical EngineeringJIT Guwahati
Guwahati - 781039, India
Email: [email protected]
B. V. S. S. S. Prasad
Dept. of Mechanical EngineeringHT Madras
Chennai-600 036, India
Email: [email protected]
Suresh V. Garimella
School of Mechanical EngineeringPurdue University585 Purdue Mall
West Lafayette, IN 47907-2088, USA
Email: [email protected]
technische
informationsbiqliothek'
universitAtsbjsliothekhannover
Organized under the auspices of:
Indian Society for Heat
and Mass Transfer
American SocietyofMechanical
Engineers
M
Tata McGraw-Hill Publishing Company LimitedNEWDELHI
McGraw-Hill OfficesNew Delhi New York St Louis San Francisco Auckland Bogota Caracas
Kuala Lumpur Lisbon London Madrid Mexico City Milan Montreal
San Juan Santiago Singapore Sydney Tokyo Toronto
Contents
1SHMT-ASME Joint Committee
National Advisory Committee
Sub-Committees of the Local Organising Committee
SponsorsReviewers-
Foreword
Plenary Lectures
HMT-2006-P1 A Thermal Engineering Approach to Low Temperature Biology and Medicine
Boris Rubinsky
HMT-2006-P2 Experiments in Desalination
A. E. Muthunayagam
v
vi
vii
viii
ix
xi
1-24
Page Nos. Page Nos.
in CD in Volume
PI
P14
Invited Keynote Papers
16
25-236
HMT-2006-K1
HMT-2006-K2
HMT-2006-K3
HMT-2006-K4
HMT-2006-K5
HMT-2006-K6
HMT-20O6-K7
HMT-2006-K8
HMT-2006-K9
HMT-2006-K10
HMT-2006-K11
Flow Boiling Heat Transfer in MicrogravityGian Piero Celata
Enthalpy-Based Macro-Scale and Micro-Scale Models for Solidification
Pradip Dutta
Thermal Phenomena in Biological MicrodevicesAnkur Jain and Kenneth Goodson
Recent Advances in the Transcritical C02 Cycle TechnologyEckhardA. Groll
Heat Transfer and Fluid Flow Issues in the Indian Nuclear Reactors of
the Next Decade
S.K. Gupta
Gas-Liquid Two-Phase Flow in Microchannels: The Effects of
Gas-Liquid Injection MethodsMasahiro Kawaji, Akimaro Kawahara, Koji Mori,
Michio Sadatomi and Kazuyuki Kumagae
Improvement of Condensation Heat Transfer by Surface Modifications
Alfred Leipertz and Andreas Paul Froba
Thermal Challenges in the Semi-Conductor IndustryRavi Mahajan, Chia-Pin Chiu, Ravi Prasher and
loan Sauciuc
Radiative Heat Transfer in Nano to Mega-SystemsShigenao Maruyama
The Evolution of Air Cooling in Electronic Systems and Observations
about its Limits
Alfonso Ortega
Heat Transfer from Rotating SystemsB.V.S.S.S. Prasad
Page Nos.
in CD
Page Nos.
in Volume
K22 27
K30 35
K44 49
K56 61
K66 71
K75 80
K85 90
K100 105
K106 111
K114 119
K129 134
xiii
HMT-2006-K12 Advances in Heat Flux and High Temperature Instrumentation K145
S.V. Subba Rao
HMT-2006-K13 Spectral Remote Sensing for Furnaces and Flames K161
Tae-Ho Song
HMT-2006-K14 Activated Carbon Based Adsorption Systems—Thermodynamics, K174
Heat and Mass Transfer Aspects of Refrigeration and Gas StorageK. Srinivasan
HMT-2006-K15 New Understanding of Convective Heat Transfer Enhancement and its K190
Engineering Applications
Ya-Ling He, Wen-Quan Tao and Zhi-Guo Qu
HMT-2006-K16 Heat Transfer by Impingement of Circular Free-Surface Liquid Jets K206
John H. Lienhard V
HMT-2006-K17 Fuel Cells — An Energy Provider for the Future? K222
Rowland P. Travis
Contributed Papers
I—Radiation, Conduction and Forced Convection 1-294
HMT-2006-C001 Comparison of Discrete Ordinate and Finite Volume Methods in the Solution 1
of Radiative Transfer EquationM. Deiveegan, C. Balaji and S. P. Venkateshan
HMT-2006-C002 Discrete Transfer Method Applied to Radiative Transfer in a Variable Refractive 7
Index Participating MediumN. Ananda Krishna, and Subhash C. Mishra
HMT-2006-C003 Radiation Heat Transfer in 3D Enclosures with Participating Media using 13
Unstructured Mesh
N. V. Saravanan and A. W. Date
HMT-2006-C004 Multi-Dimensional Radiative Transfer in Participating Media with Bounding Walls 19
having both Specular and Diffuse Reflection Componentsy. Shuai, X. F. Zhang, S. K. Dong and H. P. Tan
HMT-2006-C005 Radiative Transfer Simulations with Microphysical Properties of Clouds 27
and Varying HydrometeorsSamir Pokhrel, R, M. Gairola, A. K. Varma and
Vijay K. Agarwal
HMT-2006-C006 Estimates of Nocturnal Near-Surface Radiative Flux Divergence from 33
Observational Data
V. Mukund and K. R. Sreenivas
HMT-2006-C007 Experimental Study of Radiating Pin Fin 39
Ganesh Murali J. and Subrahmanya S. Katte
HMT-2006-C008 Is Thermal Rectification Possible? 43
Greg Walker
HMT-2006-C009 Analysis of Transient Conduction and Radiation Heat Transfer with 51
Variable Thermal Conductivity using the Lattice Boltzmann Method and
the Discrete Ordinate Method
Nishant Gupta, G. Raghu Chaitanya and Subhash C. Mishra
HMT-2006-C010 The Physical Meaning of Heat Transport Potential Capacity 59
Han Guangze and Guo Zengyuan
HMT-2006-C011 Absorptivity Characterization of Anodized Aluminium 65
Alloy Panel using Inverse Heat Conduction Method
Susamma Jacob, Deependran B„ Sundar B. and George Joseph
xiy
HMT-2006-C012
HMT-2006-C013
HMT-2006-C014
HMT-2006-C015
HMT-2006-C016
HMT-2006-C017
HMT-2006-C018
HMT-2006-C019
HMT-2006-C020
HMT-2006-C021
HMT-2006-C022
HMT-2006-C023
HMT-2006-C024
HMT-2006-C025
HMT-2006-C026
HMT-2006-C027
HMT-2006-C028
HMT-2006-C029
Comparisons of the Lattice Boltzmann Method and the Finite Difference 69
Methods for Heat Conduction Problems
Tanuj Kush, B. Siva Rama Krishna and Subhash C. Mishra
An Analytical Solution of a Class ofPohlhausen 's Problem with Hartee's 77
Velocity Profile
A. K. Pramanick and P. K. Das
A Numerical Study of Laminar Flow Field and Heat Transfer Between 84
Parallel Disks
J. A. Esfahani, Y. Daghighi and M. Zare
Comparison and Validation of Heat Transfer Correlations for In-Tube 92
Cooling of Supercritical C02Jahar Sarkar, Souvik Bhattacharyya, M. Ram Gopal and Sunil Goutam
Thermohydraulics of Turbulent Flow through Rectangular and Square 100
Ducts with Transverse Rib Turbulators on Two Opposite Surfaces of the
Ducts Fitted with Twisted TapesAshis K. Mazumder and Sujoy K. Saha
Heat Transfer in Simultaneously Developing Pulsating Pipe Flow 108
Himadri Chattopadhyay, Franz Durst and Subhasis Ray
Experimental Investigation of Heat Transfer Characteristics in Fire Tubes 113
Using Twisted TapesIngole S. B., Loknath M. S. and Yadav S. D.
Prediction of Turbulent Round Jet in a Co-Flowing Ambient Using K-E 118
Model of Turbulence
Anupam Dewan, Manabendra Pathak, Anoop K. Dass and Pintulal Sardar
Effect of Inter-Jet Spacing on Heat Transfer Characteristics for a Triangular 126
Array of Methane/Air Flame Jets Impinging on a Flat Surface
Subhash Chander and Anjan Ray
Effect of Nozzle Geometry of Turbulent Jet on the Impingement Heat 134
Transfer to a Flat Plate
D, P. Mishra
Heat Transfer Characteristics of a Synthetic Jet Impingement 140
X. M. Tan and J. Z. Zhang
Heat Transfer Augmentation between Impinging Circular Air Jet and Flat 146
Plate using Finned Surfaces
P. M. Nakod, S. V. Prabhu and R. P. Vedula
Numerical Study of Jet Impingement on a Concave Surface 154
B. V. N. Rama Kumar and B. V. S. S. S. Prasad
Fluid Flow and Heat Transfer in a Multiple Jet Impingement Oven 160
DilekKocer andMukund V. Karwe
Flow and Heat Transfer characteristics behind a Cube placed in a Uniform Flow 168
A. K. Saha
Vortex Shedding and Heat Transfer from a Square Cylinder with Ground Effect 176
S, Bhattacharyya, D. K. Maiti and S. Dhinakaran
Effect of Peclet Number on the Heat Transfer across a Square Cylinder in the 184
Steady Confined Channel Flow RegimeA. K. Dhiman, R. P. Chhabra and V. Eswaran
Heat Transfer Performance with an Array of Delta Wing Vortex Generators 192
on Two Opposite Walls in a Square Duct
M. K. Nalawade and R. P. Vedula
244
245
245
245
246
246
246
246
247
247
247
248
248
248
248
249
249
249
xv
HMT-2006-C030
HMT-2006-C031
HMT-2006-C032
HMT-2006-C033
HMT-2006-C034
HMT-2006-C035
HMT-2006-C036
HMT-2006-C037
HMT-2006-C038
HMT-2006-C039
HMT-2006-C040
HMT-2006-C041
HMT-2006-C042
Experimental and Numerical Investigation on Flow and Heat Transfer 200
Characteristics in Rectangular Channel with Pin Fins Array
J. Z. Zhang, F. M. Wang and S. F. Wang
Forced Convection Heat Transfer in Mini-Fin Structures 207
R. N. Xu and P. X. Jiang
Effect of Roughness Element Shape and Arrangement on Heat Transfer and 214
Friction Factor: A Review
Karmare S. V. and Tikekar A. N.
Effect of Wall Proximity in Fluid Flow and Heat Transfer from Triangular Prisms 224
(Blockage Ratio = 0.1 and 0.2) Placed inside a Wind Tunnel
Dipes Chakrabarty and Ranajit Brahma
Influence of Aperture Displacement Ratio on Heat Transfer Through
Partially Open Tilted CavityPrasad Kaushal K. and R. K. Brahma
Thermo-Hydraulics of near Compact Heat Exchanger Models: Effect of
Wall Clearance with Turbulent Flow Experiments
K. Sumithra Raju, L.Wilson, Arunn Narasimhan and S. P. Venkateshan
Thermal Analysis of Flow through Packed Beds
SamikJash and P. O. Balachandran
Conjugate and Coupled Heat Transfer in a Gas-Filled Partitioned Enclosure
Ramesh Narayanaswamy, Andrew J. C. King and Tilak T. Chandratilleke
Effect on Heat Transfer and Flow Phenomenon in Coupled Natural Convection
and Radiation by Wall MovementS. K. Mahapatra, P. Nanda and A. Sarkar
Numerical Simulation of Natural Convection Coupled with Thermal Radiation
in the Radiant Floor Heating Room
Ma Liangdong, Tao Wenquan, Dai Ting and Sun Dexing
A Conjugate Analysis of Heat Transfer from a Horizontal Fin Array by
Natural Convection and Radiation with Suction and Blowing at the Base
Vedula Dharma Rao, S. V, Naidu, B. Govinda Rao, K. V. Sharma and
T. Subrahmanyam
Performance Analysis of Fins with Uniform Thickness for a Flat PrimarySurface Subject to Combined Heat and Mass Transfer
B. Kundu, C, Mishra and B. Gayen
Thermal Calculation on Pipelines during Start-upWu Guozhong and Chen Chao
II—Free and Mixed Convection
HMT-2006-C043 Experimental Investigations on Thermal Stratification in Chilled Water
HMT-2006-C044
HMT-2006-C045
HMT-2006-C046
Storage Tanks
N. Gopalakrishnan, B. V. S. 5. S. Prasad and S. Srinivasa Murthy
Natural Convective Heat Transfer in a Vertical Rectangular Cavity
Asish Mitra, Tapas Kumar Dutta and Dibyendu Narayan Ghosh
Experimental Studies on Dynamics of Water and Ethanol in a Vertical Annulus
M. Asif and M. Altamush Siddiqui
CFD Studies on Natural Convective Flow Patterns inside Inclined Cylinders with
Unity Aspect Ratio
Mahesh N. Varma and Kannan A.
234
242
249
257
263
268
274
282
291
295-510
295
302
309
317
xvi
HMT-2006-C047 Comparison ofCoupling Mechanism in Differentially Heated Horizontal 325
Immiscible Fluid Layers Confined in different Geometries
Sunil Punjabi
Natural Convection in Tilted Partially Divided Enclosure 333
C. D, Sankhavara and H. J. Shukla
Natural Convection Heat Transfer Enhancement with Single 341
V-Type Partition Plate
Ravindra L. Edlabadkar, Narayan K. Sane, G. V. Parishwad
and G. S. Tasgaonkar
Natural Convection Heat Transfer Enhancement in Horizontal Rectangular Fin 347
Array with Inverted Notch
Narayan K. Sane, Suneeta S. Sane, S. D. Suryawanshi and Gajanan V. Parishwad
HMT-2006-C048
HMT-2006-C049
HMT-2006-C050
HMT-2006-C051
HMT-2006-C052
HMT-2006-C053
HMT-2006-C054
HMT-2006-C055
HMT-2006-C056
HMT-2006-C057
HMT-2006-C058
HMT-2006-C059
HMT-2006-C060
HMT-2006-C061
HMT-2006-C062
HMT-2006-C063
Natural Convection in an Inclined Rectangular Layered Porous Cavity
R. V. Sharma, N. Kumar and R. P. Sharma
Transient Analysis of Thermal Convection in Square Porous Cavity under
Transverse Sinusoidal Micro Gravity Field
Pradyumna Ghosh and M. K. Ghosh
Steady State Simulation ofNatural Convection in Heat Generating Porous
Medium under Different Boundary Conditions
M. K. Chourasia and T. K. Goswami
352
358
366
373Fluid Flow in Porous Media with Viscous Dissipation Effects
M. Nazari, M. H. Kayhani and M. M. Shahmardan
Thermally Driven Comparison of Small Single-Cyclic Channel and Small Double- 378
Cyclic Channel in Gravitation Field
Xia Jie, Chang Hai-ping and Yang Min
Measurements for Flow Resistance Coefficient Values of Perforated Plates in 382
Natural Air Convection Flows
Masaru Ishizuka, Katsuhiro Koizumi and Shinji Nakagawa
Three Dimensional Analysis ofNatural Convection from a Vertical Wall with 389
Discrete Heat Sources placed at Arbitrary Locations
Dinesh K. K, S. Jayaraj and Mallikarjuna Rao, P.
Natural Convection in a Cavity with a Wavy Wall Heated from below and 397
uniformly cooled from the top and both sides
Amaresh Dalai andManabKumarDas
Laminar Conjugate Natural Convection in a Vertical Channel with Discrete 405
Protruding Heat Sources
G. Madhusudhana Rao, G. S. V. L. Narasimham and M. V. Krishna Murthy
Combined Free-Forced Convection in a Shallow Enclosure with or without 414
partitions with a Series of Heat Generating Components
Mayur T. Bhoite, G. S. V. L, Narasimham and
M.V. Krishna Murthy
Mixed Convection Criteriafor Pol Fluids Flowing in a Vertical Channel 423
Vipin Yadav and Keshav Kant
Flow Structure and Concentration Gradients around a Crystal Growing from 431
its Supersaturated Solution in the Mixed Convection Regime
Atul Srivastava, K. Muralidhar and P. K. Panigrahi
Study of Modular Arrays at PCB Surface for Electronic Cooling Application 440
under Natural, Mixed and Forced Convection
Vipin Yadav, Bijendra S. Rajput and Keshav Kant
258
258
258
259
259
259
260
260
260
260
261
261
261
262
262
263
263
xvii
HMT-2006-C064 A Numerical Study of the Onset of Cellular Motion in a Layer of Shear-Rate 446
dependent Non-Newtonian Fluid
V. Dakshina Murty, David M. Pratt and Larry W. Byrd
HMT-2006-C065 Role ofPrandtl Number on the Stability of Mixed Convection in a Vertical 453
Channel filled with a Porous Medium
P. Bera
HMT-2006-C066 Radiation-Induced Buoyancy-Driven Laminar Natural Convection in a 460
Participating Medium within a Square Enclosure using Finite Element Method
Kunja Bihari Sahu
HMT-2006-C067 Fully Developed Hydrodynamic and Thermal Transport in Combined Pressure 468
and Electrokinetically Driven Flow in a MicroChannel with Asymmetric
Boundary Conditions
Achintya Mukhopadhyay, Sayak Banerjee, Chandrasekhar Gupta and
Devranjan Samanta
HMT-2006-C068 Mixed Convection Heat Transfer in the Entrance Region of Annuli with 475
Peripherally Varying Heat Flux
Abdus Samad, Nazrul Islam and Saleem Anwar Khan
HMT-2006-C069 Sherwood Number Estimation for Mass Transfer from a Rotating Cylinder for 483
very low Reynolds Numbers
R. Srinivasan, S. Jayanti and A. Kannan
HMT-2006-C070 Controlling of Instability of a Rectangular Natural Circulation Loop 488
N. M. Rao, B. V. K. Reddy, B. Maiti and P. K. Das
HMT-2006-C071 Transient Analysis of a Rectangular Natural Circulation Loop with Throughflow 496
N. M. Rao, B. V. K. Reddy, B. Maiti and P. K. Das
HMT-2006-C072 Numerical Prediction of Effect on Orientation to Flow and Thermal 504
Oscillations in Buoyant Jet
5*. Suyambazhahan, T. Sundararajan and Sarit K. Das
III—Solidification, Boiling, Condensation and Multiphase Heat Transfer 511-736
HMT-2006-C073 Solidification of Phase Change Material Inside a Cylindrical Capsule 511
A. Felix Regin, S. C. Solanki and J. S. Saini
HMT-2006-C074 An Enthalpy based Micro-Scale Model for Solidification 518
D. Pal, J. Bhattacharya, P. Dutta and S. Chakraborty
HMT-2006-C075 Analysis of Solidification of a Semitransparent Planar Layer using the Lattice 526
Boltzmann Method and the Discrete Transfer Method
Rishi Raj, Amit Prasad, Pritish Ranjan Parida and Subhash C. Mishra
HMT-2006-C076 CFD Modeling of Two-Phase Bubbly Flow with Heat and Mass Transfer 534
K. S. Bhambare, V. B. Kabra, S. S. Salutagi and A. N. Tikekar
HMT-2006-C077 Experimental Investigation of Pressure Drops across various Components 542
of Fuel Bundle in Two-Phase Flow
M. R. Gartia, D. S. Pilkhwal, P. K. Vijayan and D. Saha
HMT-2006-C078 Heating and Evaporation ofTurbulent Falling Liquid Film on a Vertical Surface 551
K. V. Sharma, J, Saibabu, P. K. Sarma and Vedula Dharma Rao
HMT-2006-C079 A Coupled Map Lattice Model of Flow Boiling of Water in a Horizontal Tube 559
P. S. Ghoshdastidar and Indrajit Chakraborty
HMT-2006-C080 Experimental Study to Investigate Quenching of a Vertical Thin Tube 567
Santosh Kumar Sahu, Prasanta Kumar Das and Souvik Bhattacharyya
xviii
HMT-2006-C081
HMT-2006-C082
HMT-2006-C083
HMT-2006-C084
HMT-2006-C085
HMT-2006-C086
HMT-2006-C087
HMT-2006-C088
HMT-2006-C089
HMT-2006-C090
HMT-2006-C091
HMT-2006-C092
HMT-2006-C093
HMT-2006-C094
HMT-2006-C095
HMT-2006-C096
HMT-2006-C097
HMT-2006-C098
Scaling Criteria for a Natural Circulation Boiling System 578
Dipankar Narayan Basu, Souvik Bhattacharyya and P. K. Das
Enhancement of Saturated Boiling ofIsopropanol on PTFE Coated Heating 584
Surfaces
C. B. Vijaya Vittala, L. Prasad, S. C. Gupta and Vijay K. Agarwal
A Generalized flow Correlation for Two-Phase Natural Circulation Loops 590
M. R. Gartia, P. K. Vijayan and D. S. Pilkhwal
Study on the Stability behavior of Two-Phase Natural Circulation Systems 598
using a Four-Equation Drift Flux Model
A. K. Nayak, P. Dubey, D. N. Chavan and P. K. Vijayan
A Study on Critical Heat Flux Temperature in a Natural Circulation Loop 606
G. S. S. P. Rao, D. K. Chandraker, A. K. Nayak and P. K. Vijayan
Investigation on Dependence of CHF on Two-Phase Flow Pattern Based on 611
CHFLook-Up TableData
D. K. Chandraker, P. K. Vijayan, D. Saha and R. K. Sinha
Prediction of Critical Heat Flux using Temporal Variation of Micro/ 618
Macro Layer Thickness
A. K. Das, P. K. Das, S. Bhattacharyya and P. Saha
Experimental Studies on augmentation of Heat Transfer Coefficients for Nucleate 626
PoolBoiling ofLiquidS. Husain, B. Mohanty and S. C. Gupta
Computational Study on Nucleate Pool Boiling under High Heat Flux Conditions 634
Nadeem Alam, A. M. Jairajpuri and Nazrul Islam
Role of Dynamic Surface Tension and Surface Tension Gradients in Pool Boiling 641
of Aqueous SDS Solutions
Vivek M. Wasekar
Theoretical Modelling on Condensation Heat Transfer on a Finned Tube in die 649
presence of Non-condensable Gas
A. Borgohain, N. K. Maheshwari and D. Saha
Modeling of Filmwise Condensation with Multicomponent 657
Non-condensable Gases
A. G. Patel, N. K. Maheshwari and D. Saha
Condensation of Vapor in the presence of a High Concentration Non-Condensable 666
Gas during Laminar Flow of Air Over a Flat Plate
Vedula Dharma Rao, V. Murali Krishna, K. V. Sharma and P. K. Sarma
Condensation Heat Transfer at Near-Critical Pressures in Refrigerant Blends 673
Yirong Jiang, Biswajit Mitra and Srinivas Garimella
Development of Local Condensation Correlation for a Passive Condenser System 683
Suengmin Oh and Shripad T. Revankar
Exit-Condition, Gravity, and Surface-Tension Effects on Interfacial-Waves and 691
Heat-Transfer Rates in Internal Condensing Flows
L. Phan, X. Wang, S. Kulkarni and A. Narain
Drift Flux Model for Adiabatic Capillary Tubes for Refrigeration Systems 703
Hirendra Kumar Paliwal and Keshav Kant
Experimental and Numerical Investigations on Two-Phase Flow through Straight 709
(Adiabatic and Heated) and Helically Coiled (Adiabatic) Capillary Tubes
Subodh D. Deodhar, S. V. Prabhu and Kannan N. Iyer
271
272
272
272
273
273
273
273
274
274
274
275
275
275
276
276
276
277
xix
HMT-2006-C099 Study of Tube Bundle Heat Transfer in Vertical Foam Flow 716
Jonas Gylys, Stasys Sinkunas and Tadas Zdankus
HMT-2006-C100 Boiling Heat Transfer Enhancement using Micro Machined Porous Channels 722
for Electronics CoolingNovas Khan, K. C. Toh, D. Pinjala and C. C. Wong
HMT-2006-C101 Cooling of Electronics using Phase Change Materials and Thermal 730
Conductivity Enhancers
S. Saha, K. C. Nayak, K, Srinivasan and P. Dutta
IV—Computational Heat Transfer 737-969
HMT-2006-C102 Solution of Steadv State Heat Conduction Problems by Radial Basis Function 737
HMT-2006-C103
HMT-2006-C104
HMT-2006-C105
HMT-2006-C106
HMT-2006-C107
HMT-2006-C108
HMT-2006-C109
HMT-2006-C110
HMT-2006-C111
HMT-2006-C112
HMT-2006-C113
HMT-2006-C114
HMT-2006-C115
745
752
Solution of Steady State Heat Conduction Problems by Radial Basis Function
Neural Network
Ashok Kumar Alwal, Kishore Aggarwal and U. S. Dixit
Application of Artificial Neural Network for Jet Impingement Cooling of
ElectronicPackages
Sanjiv Nair, G. A. Quadir and Z. A. Zainal
Application of Artificial Neural Network for Flow through Porous Medium with
Radiation and Free Convection
Irfan Anjum Badruddin, Z. A. Zainal, K. N. Seetharamuand P. A. Aswatha Narayana
Optimum Predictions of Thermal Energy Storage Heat-sink Quality Factors 759
through Artificial Neural Networks
Jeevan Kanesan, Parthiban Arunasalam, Kankanhalli N. Seetharamu and Ishak A. Azid
Artificial Neural Networks and Genetic Algorithms based retrieval of Geophysical 764
parameters in the AtmosphereV. Swaminathan, R. M. Gairola, S. P. Venkateshan, V. K. Agarwal and C. Balaji
Lattice Boltzmann Simulation of Fluid Flow and Heat Transfer in a
Two-Dimensional Channel
Y. Wang, Y. L. He, G. H. Tang and W. Q. Tao
A Lattice Boltzmann Method for Solid-Liquid Phase Transition Modeling
Dipankar Chatterjee and Suman Chakraborty
Lattice Boltzmann Modelling and Experimental Measurements of Concentration
Profiles in Adsorption Bed
Nilesh Manjhi, Nishith Verma, Karijm Salem and Dieter Mewes
Numerical Simulation of a Complex ADSS using Finite Element Method
K, Ami Prakash, B. V. Rathish Kumar, Gautam Biswas
Finite Element Analysis for Counter Flow Three-Fluid Heat Exchanger
NawafH, Saeid and K. N. Seetharamu
Finite Element Simulation of Multi-Stack Micro-channel Heat-sinks with Parallel
and Counter Two-Phase Flow
Pradeep G. Hegde, K. N, Seetharamu, M. Z. Abdullah and A. Y. Hassan
Analysis of Brick Drying using Finite Element Method
H, N. Suresh, D. S. Nagesh, P. A. Aswatha Narayana and K. N. Seetharamu
A Compact-scheme based comparison between Stream Function-Vorticitymethod and the Primitive Variable ApproachArnab Kumar De and Vinayak Eswaran
A Dynamic Mesh Adaptation Methodology for Multi-Scale Thermo-Fluid Problems 824
Sumit Basil, Debabrata Das Gupta and Suman Chakraborty
111
111
785
792
800
806
812
ili
277
211
278
279-290
281
281
281
282
282
282
283
283
283
283
284
284
284
285
xx
HMT-2006-C116
HMT-2006-C117
HMT-2006-C118
HMT-2006-C119
HMT-2006-C120
HMT-2006-C121
HMT-2006-C122
HMT-2006-C123
HMT-2006-C124
HMT-2006-C125
HMT-2006-C126
HMT-2006-C127
HMT-2006-C128
HMT-2006-C129
HMT-2006-C130
HMT-2006-C131
HMT-2006-C132
HMT-2006-C133
Entropy Generation Analysis in Error Estimation ofApproximate Solution 832
Methods: Implemented to Conductive Problem
J. A. Esfahani and E. Roohi
Convergence Characteristics of Two Numerical Methods: Case Study in 840
Rotating Channel Flow
Pankaj K. Gupta and Krishnan V. Pagalthivarthi
A Fixed Grid Numerical Methodology for Modeling Wet Chemical Etching 846
P. Rath, J. C. Chai, H. Zheng, Y. C. Lam and V. M. Murukeshan
Moving Interfaces in Computational Fluid Dynamics 854
Akshay Prakash and Ashish Choudhary
Flow Topology in Cubical And Square Lid-Driven Cavities 858
Anupam Dewan, Varun Garde, Manish Kumar and Anoop K. Dass
Numerical Heat Transfer Study of Two-Dimensional Laminar Incompressible 866
Offset Jet Flows
P. Rajesh Kanna and Manab Kumar Das
Numerical Study on Effect of Rotation, Channel Orientation and Rib Spacing on 872
the Heat Transfer in Rotating Single Wall Ribbed Square Channel
Aran, K, S. V. Prabhu and R. P. Vedula
Numerical Investigation of Developing Flow and Heat Transfer in a 880
Rectangular Wavy Channel
Atul Sharma
Turbulent Flow through a Corrugated Heat Exchanger Channel 887
P. Nithiarasu and V. V. Wadekar
Computational Fluid Dynamics of a Heated Turbulent Plane Jet in a Cross-Flow 893
Using Reynolds Stress-Transport Model
Manabendra Pathak, Anupam Dewan and Anoop K.'Dass
Fluid Flow in Flip Chip Electronic Packages 901
Venkatesh M. Kulkarni, Heng Chai Wei, Ishak Abdul Azid, K. N. Seetharamu
and P. A. Aswathanarayana
Three Dimensional Conjugate Heat Transfer Analysis of Single-Chip 907
Mounted on PCB
Maram Venkata Ramana, Indra Putra Almanar, M. Z. Abdullah,
Zaidi Mohd. Ripin and K. N. Seetharamu
Numerical Investigation of Electroosmotic Flows for Microelectronics Cooling 913
P. Nithiarasu, A. K. Arnold and P. G. Tucker
Simulation of Spray Combustion Using CFD Techniques 919
Ch. Sivaprasad, Abhishek Jain and lrshad Khan
Numerical Simulation of the Dynamics of a Vapour Film around a Molten 928
Metal Drop in Subcooled Water
Koushik Ghosh, Achintya Mukhopadhyay, Swarnendu Sen and Dipankar Sanyal
Simulation of Flow in Stirred Tank using Multiple Reference Frames Method 936
V. R. Kalamkar, B. K. Gupta, M. Ahmad and G. R. Shevare
Chaotic Mixing in Steel Ladles with Bottom Gas Stirring: a 942
Numerical InvestigationAloke Kumar, Suvankar Ganguly and Suman Chakraborty
Development And Improvement of 3-D CFD-Fluent-REI Model for 948
Wood-Stoker Boiler
P. Deb
285
285
285
286
286
286
286
287
287
287
287
288
288
288
288
289
289
289
xxi
HMT-2006-C134
HMT-2006-C135
Computational Fluid Dynamics Simulation and Experimental Investigation ofFlow Distribution in a Solar Flat Plate Collector
M. Premalatha, V. Kirubakaran, R. Ganesh, V. Sivaramakrishnan
and P. Subramanian
Study of Dust Explosions inside Grain Storage Silos Assessment of VentingAreas by means of the CFD TechniqueM. Campanale, C. Bonacina and L. Moro
V—Measurements and Thermophysical Properties
HMT-2006-C136
956
961
970-1087
970
HMT-2006-C137
HMT-2006-C138
HMT-2006-C139
HMT-2006-C140
HMT-2006-C141
HMT-2006-C142
HMT-2006-C143
HMT-2006-C144
HMT-2006-C145
HMT-2006-C146
HMT-2006-C147
HMT-2006-C148
HMT-2006-C149
HMT-2006-C150
Convective Surface Heat Transfer Measurement using Platinum Thin
Film Sensors in Hypersonic Testing Facilities
Niranjan Sahoo and K. P. J. Reddy
Application of Computational Flow Imaging (CFI) to Temperature 977
Measurement in Flow Fluid
Yaozu Song, Kunlun Yang and Jianxun Ren
Velocity Profile Measurement in Rough Pipes using Non-intrusive Ultrasonic 983
Doppler Shift Echography Method
R. Chaudhary, Vishveshwar Mantha, T. K. Das, A. K. Haruray and P. Satyamurthy
On-line diameter and Edge-Offset Measurement System for Pipe Plant 989
B. N. Ghosh, K. N, Rao, A. K. Paul, B. K. Santra and N, Neogi
Estimation of Absorbed Surface Heat Flux at Material Surface Subjected to a High 993
Energy Laser Beam Using Inverse TechniqueHuiyan Wang and Pradip Majumdar
Emission Spectroscopy Sensor: OH and CH 1001
Chemilumin escence Measurements in an Opposed Flow Diffusion Flame
Maurizio De Leo, Alexei Saveliev, and Lawrence A. Kennedy
Dynamic Measurements of Moisture Loss During Drying Storage of Cell 1009
Suspensions-Model Results
Surbhi Mittal and Ram Devireddy
Estimation of Thermophysical Properties by Temperature Oscillation Method 1014
5. D. Patle and R. K, Sahoo
Thermal Transport Property Measurement of a Two-Dimensional Thin Film 1022
using the 3-co Method
Ankur Jain, Xuejiao Hu and Kenneth Goodson
Radiating Fin Technique for Estimating Temperature Dependent Thermal 1027
ConductivityAmritAmbirahan, N, K. Sundaresan and A. Ramasamy
A Model For Thermal Conductivity of Nanofluids 1032
Hrishikesh E. Patel, T. Pradeep, T. Sundararajan and Sarit K. Das
Theoretical Evaluation of Thermo Physical Properties of Nano Fluids 1036
V, Vasu, K. Rama Krishna and A. C. 5. Kumar
Hot-Wire Method for Characterizing High Temperature Multi-use Thermal 1043
Protection System Materials under Vacuum Environments
S. Kesav Kumar, S. Krishnamoorthy and S. V. Subba Rao
Measurement of Thermophysical Properties of CFRP Laminate for 1-2000 Bus 1050
Ramakrishnan V., Ramasamy A., Gupta P. P. and Bhandari D. R.
Low Temperature Thermal Diffusivity of Glass Fabric Composites using 1058
Modified Angstrom MethodS, Kanagaraj and S. Pattanayak
xxii
HMT-2006-C151 Influence of the Fibre Orientation on Thermal Expansion of Carbon 1063 298
Composites at Low TemperaturesS. Kanagaraj and S. Pattanayak
HMT-2006-C152 Experimental Determination of the Effective Thermal Conductivity of Packed 1070 298
Glass Beads
Chakravarti V. Madhusudana
HMT-2006-C153 Measurement of Pressure Drop and Heat Transfer in a Spirally Grooved Tube 1075 298
with Twisted Tape Inserts under Constant Wall Heat Flux
Priyank Bhardwaj and A. W. Date
HMT-2006-C154 Measurement of Liquid Concentration during Solidification of a Binary Mixture 1081 299
N. Barman, J. Jain and P. Dutta
VI—Heat Transfer Equipment and Augmentation Techniques 1088-1314 301-312
HMT-2006-C155 Recent Technology Developments in AutomotiveAir-Conditioning Evaporators 1088 303
V. Ravindranatha Reddy, A. S. Ravikumar and R. K. Shah
Uncertainties in Estimation of Colburn (j) Factor and Fanning Friction (f) 1096 303
Factor for Offset Strip Fin and Wavy Fin Compact Heat Exchanger Surfaces
C. Vengudupathi, L. Sheik Ismail and Ch. Ranganayakulu
Experimental Study of Turbulent Flow Heat Transfer and Pressure Drop 1104 303
of Refrigerant R134A in a Bubble Finned Plate Heat ExchangerN. Azhagesan, C, K. King Selvan and Balachandran
Effect of Fin Height During Condensation of R-134a Vapor Over Single 1109 304
Horizontal Integral-Fin Tubes
Ravi Kumar, Akhilesh Gupta and Sandeep Vishwakarma
Heat Transfer Augmentation in a Near-Compact Heat Exchanger Using Porous 1115 304
Medium Fins
Arunn Narasimhan and Kapil Das Sahu
Surface Finish Evaluation of Process Surfaces Used in Fouling Applications 1122 304
David J. Kukulka and Mohan Devgun
Analytical and Experimental Investigations on Axially Grooved Aluminium-Ethane 1130 305
HeatPipeAnandA. R., Vedamurthy A. J., Simhachala Rao, Sanjeev Kumar,Dinesh Kumar and Gupta P.
Experimental Studies on Heat Pipes 1138 305
John M. George and Anish K. John
Insights into the Performance Modes of Closed Loop Pulsating Heat Pipes and 1146 305
Some Design HintsSameer Khandekar and Manfred Groll
Preliminary Results from an Experimental Capillary Pumped Loop with a 1158 306
Flat Plate EvaporatorJasvanth V. S., Amrit Ambirajan, Abhijit Avinash Adoni, Dinesh Kumar,
P. P. Gupta, D. R. Bhandari and K. Srinivasan
Validation of Thermal Performance ofAir Flow in Swirl Using Computational 1165 306
Technique at Low Reynolds Number and Prediction of the Performance for
HigherReynolds NumberShah Chetan C, Patel Amit R. and P. Prabhakaran
Optimal Area Targeting of Heat Exchanger Network using Nonlinear 1173 306
ProgrammingS. Khanam and B. Mohanty
HMT-2006-C156
HMT-2006-C157
HMT-2006-C158
HMT-2006-C159
HMT-2006-C160
HMT-2006-C161
HMT-2006-C162
HMT-2006-C163
HMT-2006-C164
HMT-2006-C165
HMT-2006-C166
xxm
HMT-2006-C167
HMT-2006-C168
HMT-2006-C169
HMT-2006-C170
HMT-2006-C171
HMT-2006-C172
HMT-2006-C173
HMT-2006-C174
HMT-2006-C175
HMT-2006-C176
HMT-2006-C177
HMT-2006-C178
HMT-2006-C179
HMT-2006-C180
HMT-2006-C181
HMT-2006-C182
HMT-2006-C183
Simulation of Flat Falling Film Evaporator Network 1182
Ravindra Bhargava, Bikash Mohanty and A.K. Ray
A Parametric Analysis of Flow Mal-distribution and Consequences on the 1190
Thermal Performance of Plate Heat Exchangers
Prabhakara Rao Bobbili, Bengt Sunden and Sarit Kumar Das
Design and Analysis for Tube Sheet of Shell and Tube Type Heat Exchanger 1198
using Finite Element TechniqueV. A. Suryavanshi, S. V. Karmare, S. S. Rao and A. V. Hantodkar
Simulation of a Double Pipe Heat Exchanger 1206
M. A. Hakeem, H. Fatima, M. Kamil and S. S. Alam
Transient Behaviour of Crossflow Heat Exchangers— 1213
The Effect of Axial DispersionManish Mishra, P. K. Das and Sunil Sarangi
Prediction of Transient Performance Characteristics of Compressor Driven 1220
Metal Hydride Cooling Systems
Sagnik Mazumdar, Maddali Ramgopal and Souvik Bhattacharyya
Superheated Layer Thickness and Onset of Nucleate Compressor Driven Metal 1230
in aVertical Thermosiphon Reboiler
M. Kamil and M. A. Hakeem
Thermo Hydraulic Studies to Design and Predict the Performance of Nuclear 1238
Steam Generator
V. Ramesh, 5. Ravikrishnamoorthy and V. Ananthakrishnan
Cooling Tower Performance with Non-Uniform Water Distribution
C S. Mishra and Sanjeev Jain
Simulation of a Commercial Flash Dryer using Finite Difference TechniqueK. S. Rajan, S. N. Srivastava and B. Pitchumani
Performance Analysis of Oil Injected Twin Screw CompressorN, Seshaiah, Subrata Kr. Ghosh, Ranjit Kr. Sahoo and Sunil Kr. Sarangi
The Study of Heat and Mass Transfer Phenomena in the Shaft Furnace on
the Basis of Two-Dimensional Mathematical Model of Gas DynamicsA, N. Dmitriev
Generalized Method for Performance Evaluation of Heat Transfer Augmentation 1277
Swirl Flow of Air Over Horizontal Heated Surfaces
Choksi P. G., Patel A. R, and Prabhakaran P.
Experimental Study of Augmented Heat Transfer and Friction in Asymmetrically 1285
Heated AnnularDuct with Artificial Roughness
Rajendra Karwa, D, K. Sharma, G. Choudhary, J. Jain, J. Suthar, P. SinghandP. Bhardwaj
Augmentation of Heat Transportation by Oscillatory Flow in Grooved Ducts 1294
Tatsuya Motoki, Yuichi Ohno, Gaku Tanaka and Makoto Hishida
A Study on Heat Transfer Characteristics of Heat Exchanger with 1301
Complex Screen
Seong-Yeon Yoo, Hwa-Kil Kwon andSungho Ko
Study of Enhancement of Heat Transfer due to Flow of Nanofluid inside a 1307
Rectangular Duct with Isothermal Heat Sources at Top and Bottom
Apurba Kumar Santra, Swarnendu Sen and Niladri Chakraborty
307
307
307
308
308
308
308
309
1246 309
1253 309
1261 310
1269 310
310
311
311
311
312
xxiv
VII—Combustion and Gasification
HMT-2006-C184 Modeling Heat Transfer in Downdraft (Bio-mass) Gasifier
Avdhesh K. Sharma, M. R. Ravi and S. Kohli
1315-1512 313-324
1315 315
HMT-2006-C185
HMT-2006-C186
HMT-2006-C187
HMT-2006-C188
HMT-2006-C189
HMT-2006-C190
HMT-2006-C191
HMT-2006-C192
HMT-2006-C193
HMT-2006-C194
HMT-2006-C195
HMT-2006-C196
HMT-2006-C197
HMT-2006-C198
HMT-2006-C199
Experimental Investigations of Laminar Burning Velocity ofMethane-Hydrogen 1329 315
Fuel Mixtures
Prathap C.,Anand G., Anjan Ray, M. R. Ravi and J. P. Subrahmanyam
Determination of Adiabatic Burning Velocities of CH4 and CH4—H2 Mixtures 1334 315
using Heat Flux Method
Gaurav Bansal, Hitesh Jain, Nitin Bhan, Reddy H., Anjan Ray and Ravi M. R.
An Investigation on Laminar Burning Velocity for Propane-Air and 1340 316
Methanol-Air Mixtures
Ranajit Kumar Chakrabarti, Soupayan Mitra, Subrata Mondal
and Probir Kumar Bose
Effects of Air Pre-heating on the Soot and NO Formation in a Confined 1345 316
Laminar Diffusion Flame
Bijan Kumar Mandal, Amitava Sarkar and Amitava Datta
Temperature and Species Distribution in a Co-flowing Methane-Air Partially 1353 316
Premixed Flames
Tapas Kumar Mishra, Amitava Datta and Achintya Mukhopadhyay
Effect of Burner Rim Thickness on the Characteristics of a Laminar 1361 317
Non-PremixedFlame
Dipankar Narayan Basu, Amitava Datta and Achintya Mukhopadhyay
Interaction of Heat Loss and Lewis Number Effects on Flame Propagation 1368 317
in a Channel
Subhadeep Chakraborty, Achintya Mukhopadhyay and Swarnendu Sen
Modeling of Evaporation of Dense Cluster of Multi-component Fuel Drops 1374 317
using Spherical Cell Model
Joydeep Ghosh, Achintya Mukhopadhyay, Gurram Venkateswara Rao
and Dipankar Sanyal
Experimental Studies of Low Emission Vortex Burner 1381 317
D. P. Mishra and S. C. Nayak
Predictions of Flow and Heat Transfer in Low Emission Combustors 1387 318
Yiping Lu, Eric Esposito and Srinath V. Ekkad
Effects of External Stimulus on Dynamics of a Thermal Pulse Combustor 1395 318
Subhashis Datta, Achintya Mukhopadhyay andDipankar Sanyal
Numerical Simulation ofThree Dimensional Combustion with Radiation in 1402 318
Porous Medium Burner
M. Steven, P. Talukdar, S. Diezinger, F. Von Issendorff and D. Trimis
Effect of Port-Geometry on Temperature Distribution of Hot-Gases in 1410 319
Pre-mixed Laminar Flames issuing from a Nozzle Burner
K. Vijay, K. Kumaran and U. S. P. Shet
Experimental Analysis and Numerical Simulation of Flame Spread Over 1414 319
Water-in-Oil Emulsions
Azam M. Thatte and Anil K, Kulkarni
Computational Determination of Combustion Characteristics of Multi-Component 1422 319
Gaseous Fuel Mixtures
Ratna Kishore V., Anjan Ray and Ravi M. R.
XXV
HMT-2006-C200 Non-equilibrium Coupled-Vibration-DissociationModel of Nitrogen Speciesunder Shock Wave Heated Conditions
S. K. Dong, Y. Ma, Z. X. Duan and H. P. Tan
HMT-2006-C201
HMT-2006-C202
A Technical assessment of the Potential of Oxy-fuel Technologies for
Combustion and C02 Capture
Soumitra Sharma
Prediction and Validation of Thermal Performance of Combustion Chamber of
Hot Air Generator System Based On Dimension less Performance Parameter 'd'
Namjoshi S. A., Patel A. R. and Prabhakaran P.
HMT-2006-C203 Numerical Study of a Single Cavity Trapped Vortex Combusloi for Aero
Gas Turbine EnginesAtul Singhal and R. V. Ravikrishna
HMT-2006-C204
HMT-2006-C205
HMT-2006-C206
HMT-2006-C207
HMT-2006-C208
HMT-2006-C209
Modeling ofFuel Transport in the Intake Manifold of a Single-CylinderFour-Stroke Engine: Carburetion Vs. Port Fuel InjectionAnand T. N. C. and Ravikrishna R. V.
Simulation of the Combustion ofRenewable Emerging Gaseous Fuels in
Reciprocating Combustion EnginesFrancisco V. Tinaut, Andres Melgar, Alfonso Horrillo and Ana Diez de la Rosa
Study of Downward Smoldering Combustion in Polyurethane Foams
D. P. Mishra andAnurag Verma
Heat Transfer Modeling of Circulating Fluidized Bed Combustor
R. K. Sundaram
Development of a Heat Transfer Model to Determine the size of the Zones
of a Downdraft Bio-mass Gasifier
All Rifau, Zainal A. Z. A.,P. A. Aswatha Narayana and K. N. Seetharamu
CFD Analysis of Bio-mass Down-draft Gasifier
S. Sivakumar, R. Sudhahar and E. Natarajan
HMT-2006-C210 Computational Fluid Dynamics Modelling ofBio-mass Gasifier for Renewable
Energy ApplicationV. Kirubakaran, M. Premalatha, Shoba Jose, V. Sivaramakrishnan
and P. Subramanian
VIII—Nuclear Heat Transfer
HMT-2006-C211
HMT-2006-C212
HMT-2006-C213
HMT-2006-C214
HMT-2006-C215
Effect of Flow Direction on the Steady State and Stability Behaviour of
Single-Phase Natural Circulation in a Rectangular LoopP. K. Vijayan and Manish Sharma
Natural Circulation Performance and Simulation of Start Up Procedure in
an Integral Test LoopManish Sharma, R. K, Bagul, D. S. Pilkhwal and P. K. Vijayan
Simulation ofBoiling Flow Instabilities in a Natural Circulation Based Reactor
using different Two-Phase Flow Models
R. K. Bagul, A. K. Nayak, D. S. Pilkhwal, P. K. Vijayan and D. Saha
Simulation of Start Up Procedures of a Natural Circulation Based Reactor
R. K. Bagul, P. K. Vijayan, D. S. Pilkhwal and A. K. Nayak
1430
1436
1444
1452
1459
1472
1480
1486
1494
1500
1505
1513-1765
1513
1521
1527
1536
Stability Analysis of RELAP5/MOD3 Model using the Method of Characteristics 1545
Mishra V. andMunshiP.
320
320
320
321
321
321
322
322
322
323
323
325-338
327
327
327
328
328
xxvi
HMT-2006-C216
HMT-2006-C217
HMT-2006-C218
HMT-2006-C219
HMT-2006-C220
HMT-2006-C221
HMT-2006-C222
HMT-2006-C223
HMT-2006-C224
HMT-2006-C225
HMT-2006-C226
HMT-2006-C227
HMT-2006-C228
HMT-2006-C229
HMT-2006-C230
HMT-2006-C231
Stability Analysis ofNatural Circulation Boiling Loops using Lumped Parameter 1551
Models
Gonella V. Durga Prasad, Manmohan Pandey and S. K. Gupta
Severe Accident Analysis for Simultaneous Break of all Main Steamlines of 1558
VVER-1000MWe Using SCDAP/RELAP5/MOD3.2R. Srinivasa Rao, S. K. Dubey and S. K. Gupta
Accident Analysis of Station Blackout for VVER-1000 MWe PWR using 1566
Thermal Hydraulic Code RELAP-5/Mod 3.2
S. K. Dubey, Utkarsh S. C., S. K. Pradhan and S. K. Gupta
Numerical Experiments on Natural Circulation Boiling Water Reactorusing RELAP5P. Sankar Sastry, Manmohan Pandey and S. K. Gupta
Reliability Evaluation ofThermal-Hydraulic Passive SystemsR. B. Solanki, S. K. Pradhan, Abhay Kumar and S. K. Gupta
Analyses of Different Station Blackout Scenarios without Scram in
Natural Circulation Reactor
A. Srivastava, H. G. Lele, A. K. Ghosh and H. S. Kushwaha
Severe Core Damage Accidents Beyond the Design Basis for PHWR
S. K. Pradhan, S. K. Tripathi, S. K. Dubey and S. K Gupta
RELAP5 Model for the Passive Condenser System Relevant to Advanced
Light Water Reactor
Shripad T. Revankar and Suengmin Oh
Performance Analysis of Passive/Active Modes of Hot Shutdown for a Natural 1614
Circulation Tube Type Boiling Water Reactor
Rajesh Kumar, Avinash Gaikwad, A. Srivastava, H. G. Lele, G. Chakraborty,A. K, Ghosh andH. S. Kushwaha
Adequacy of Moderator as a Heat Sink During Decrease in Coolant Inventory 1621
Accident for a Natural Circulation Channel Type Boiling Water ReactorB. Chatterjee, A. Srivastava, P. Majumdar, Rajesh Kumar, A. J. Gaikwad,H. G. Lele, A. K. Ghosh and H. S. Kushwaha
Transient Thermal Analysis of an Exposure Device for Normal, Fire and Post 1627
Fire Test Conditions
Seik Mansoor Ali, Vishnu Verma, S. G. Markandeya and A. K. Ghosh
Thermal Analysis of an Advanced Reactor SystemAbhishek Basak, I. V. Dulera, R. K. Sinha and D. Saha
Transient Thermal Analysis of a Horizontal Source Transport Container
Subjected to a Postulated Fire Accident
P. Dubey, A. Borgohain, N. K. Maheshwari and P. K. Vijayan
Thermal Modelling of Ceramic Composite Fuel for Light Water Reactors
Shripad T. Revankar, Ryan Latta and A. A. Solomon
Design Aspects of Experimental Facility for Validation of Leak Flow Rate
Models forLeak Before Break AnalysisS. K, Bandyopadhyay, D. Mukhopadhyay, B. Ghosh, A. K. Pal, V. M. Shanware,
S. G. Markandeya, H. S. Kushwaha, S. Das, D. Mishra, S. Mondal,
A. Bhattacharya and S. K. Saha
Transient Analysis of Pressuriser Valve Stuck Open for Kudankulam NPP 1666
Utkarsh S. Chikkanagoudar, S. K. Dubey, S. K. Gupta and R. I. Gujrathi
328
328
329
1575 329
1582 330
1590 330
1597 331
1607 331
332
332
333
1635 333
1641 333
1649 333
1657 334
334
xxvii
HMT-2006-C232 A Study on the Effect of Rise in Temperatures of Moderator, End-Shield Water 1674
and Components During Selected Postulated Single Failure Events Related to
Moderator System in 540 MWe Indian PHWRs
P. Krishna Kumar, S, Hajela, D. Datta and P. K. Malhotra
HMT-2006-C233 Advanced Process Control Approach to Enhance Performance of the Primary 1682
and the Secondary Pressure Control Systems for 540 MWe PHWR Power Plant
Avinash J. Gaikwad, Rajesh Kumar, B. Chatterjee, H. G. Lele, G. Chakraborty,A, K. Ghosh, H. S. Kushwaha, S. F. Vhora, Ahmed All and S. K. Gupta
HMT-20O6-C234 Thermal Hydraulic Analysis of Decay Heat Exchanger 1692
U. Parthasarathy, P. Selvaraj, P. Chellapandi and S. C. Chetal
HMT-2006-C235 Steam Flow Through the Annular Gap Between Exit of the ASDV Silencer 1698
and Exit PipeJ. S. Bharj, Benny John, R. R. Sahaya and S. P. Dharne
HMT-2006-C236 Assessment of the Heat Transfer and Late Phase Models of the 1706
ICARE/CATHARECode Against Debris Bed "in pile" Experiments
Repetto Georges and Ederli Stefano
HMT-2006-C237 Experimental Investigation of Thermal Stratification in a Reduced Scale
Model ofPFBR
D. Laxman, P. K. Gupta, S. Ajesh Kumar, N. S. Shivakumar, C. A. Gopal,G. Padmakumar V. Prakash, C. Anandbabu and G. Vaidyanathan
HMT-2006-C238
HMT-2006-C239
HMT-2006-C240
Steady State Two Dimensional Flow and Temperature Distribution in Core,
Hot and Cold Pools of an LMFBR
V. Parthasarathy, K. Velusamy, P. Selvaraj, P. Chellapandi and S. C. Chetal
Flow Distribution in SSSF at KalpakkamVishnu Verma, A. K. Ghosh and H. S. Kushwaha
HMT-2006-C241
HMT-2006-C242
Flow Distribution in Rod Bundles
K. Rajesh Reddy and S. Jayanti
Cross-Flow Boiling Outside Horizontal Tube Bundles : A Review
Vikas J. Lakhera, Akhilesh Gupta and Ravi Kumar
Analytical Model for Power Plant Condenser for Transients and
Off-Normal Operating Conditions
Thangamani I., Anu Dutta, S. G. Markandeya, G, Chakraborty,A. K. Ghosh and H. S. Kushwaha
HMT-2006-C243 Modelling of Power Plant Deaerator under Transient Turbine Loads
Anu Dutta, Mansoor Ali, S. G. Markendeya, G. Chakraborty and A. K. Ghosh
IX—Energy Applications
HMT-2006-C244 Optimization of Heat Transfer in Coal Fired Power Stations usingExergy AnalysisYivek Asthana, Keshav Kant and P. K. Panigrahi
HMT-2006-C245 Exergy Analysis of a 210 MW Thermal Power Plant Cycle at Different
Operating Conditions
Suman Sengupta, Subhas Dutta Gupta and Amitava Datta
HMT-2006-C246 Performance Simulation of Heat Recovery Steam Generator in Combined
Cycle Power Plant
N. Ravi Kumar, K. Rama Krishna and A. V. Sita Rama Raju
1715
1723
1729
1737
1743
1751
1759
1766-1916
1766
1774
1781
334
335
335
335
336
336
336
337
337
337
337
338
339-348
341
341
341
xxviii
HMT-2006-C247 Exergy Analysis of an Operating Combined Cycle Plant 1788 342
S. S. Kachhwaha and Shiv Lai
HMT-2006-C248 Second Law Analysis of a Natural Gas Fired Combined Cycle Power 1796 342
Generation Unit
K. Mohamed and B. V. Reddy
HMT-2006-C249 Present Situation and Trends in Small Scale Combined Heat And Power 1805 342
(SSCHP) Generation in Latvia
Daniels Turlajs, Dmitrijs Rusovs, Arnolds Birulis and Anna Ramata
HMT-2006-C250 Second Law Analysis of Gas Turbine Power Plant with Alternative Regenerator 1813 342
ConfigurationN. Ravi Kumar, K. Rama Krishna and A. V. Sita Rama Raju
HMT-2006-C251 Improved Gas Turbine Efficiency using Spray Coolers and through Alternative 1819 343
Regenerator ConfigurationN. Ravi Kumar, K. Rama Krishna and A. V. Sita Rama Raju
HMT-2006-C252 Generalization andThermodynamic Analysis ofRankine Cycle with Feed 1825 343
Water Heaters
T. Srinivas and A. V. S. S. K. S. Gupta
HMT-2006-C253 Exergy Analysis ofSuper Critical Cycle 1833 343
/. Satyanarayana, A. V. S. S. K. S. Gupta, K. Govinda Rajulu and P. K. Nag
HMT-2006-C254 Thermodynamic Analysis of Vortex Tubes 1840 344
Ashwin T. R. and John M. George
HMT-2006-C255 Exergy Analysis of Coal Gasifier and Gas Turbine Combustion Chamber 1847 344
T. Srinivas andA. V. S. S. K. S. Gupta
HMT-2006-C256 Sugarcane Press Mud: Compost Heat Utilization 1855 344
R. Ami Gnanaraj and S. Sundaram
HMT-2006-C257 Some Studies on Fuel Characteristics of Mesua Ferrea 1858 344
Yogendra S. Kushwah, P. Mahanta and Subhash C. Mishra
HMT-2006-C258 Thermo-economic Optimization of a Solar Assisted Single Effect H20-LiBr 1863 345
Vapor Absorption SystemP. K. Sahoo and R. D. Misra
HMT-2006-C259 Performance Characteristics of Solar Flat Plate Collectors with Semi-Circular 1871 345
Risers having Integral Fins in Natural Circulation Mode
Bhore V. R. and Thombre S. B.
HMT-2006-C260 Numerical and Experimental Investigations of Evacuated Tube Liquid 1875 345
Solar Collector
T. Gyanaprakash, R. Varadharaju, Z. A. Zainal and D. Mutharasu
HMT-2006-C261 Effect of Groove on Heat Transfer and Friction Characteristics of Rib 1880 346
Roughened Solar Air Heater Duct
A. R. Jaurker, J. S. Saini and B. K. Gandhi
HMT-2006-C262 Heat Transfer Analysis in Ideal Non-Evacuated Compound Parabolic 1886 346
Concentrating Solar Collector
P. K. Shah and L. N. Patel
HMT-2006-C263 Experimental Studies on In-built Thermal Storage Mixed Mode Agro Solar Dryer 1895 346
P. A. Potdukhe and S. B. Thombre
xxix
HMT-2006-C264
HMT-2006-C265
Heat and Mass Transfer Based Comparison of Metal Hydride Systems for
Hydrogen StorageP. Muthukumar, M. P. Maiya and S. Srinivasa Murthy
Numerical and Experimental Study on the PCM Based Cool Thermal Energy
Storage SystemM. Cheralathan, R. Velraj and S, Renganarayanan
1900
1908
X—Aerospace and Propulsion Applications
HMT-2006-C266 Thermal Analysis of the High Altitude Airship
HMT-2006-C267
HMT-2006-C268
HMT-2006-C269
HMT-2006-C270
HMT-2006-C271
HMT-2006-C272
HMT-2006-C273
HMT-2006-C274
HMT-2006-C275
HMT-2006-C276
HMT-2006-C277
HMT-2006-C278
HMT-2006-C279
HMT-2006-C280
1917-2061
1917
S. V. Bindagi, Navneet Gupta, V. Venkat Reddy and P. S. Nair
Thermal Behaviour of a Rocket Structure Subjected to Laser Beam Impingement 1925
Sundar B. and George Joseph
Thermal Analysis ofAvionics Packages in a Recovery Module During its 1930
Atmospheric Descent
Rakesh Kumar, Leelamma Simon, George Joseph and A. K. Verma
Thermal Control System of INSAT-3A Shunt Regulator and its On-Orbit 1937
Performance
M. K. Shailandran, Srinivas V. Huilgol, Dinesh Kumar, R. A. Katti and D. R. Bhandari
Thermal Control System of INSAT-3A Spacecraft and its On-Orbit Performance 1944
Shrinivas V. Huilgol, Amrit Ambirajan, M. K. Shailandran, Dinesh Kumar,
R. A. Katti and R. Bhandari
Thermal Impact on Satellite Electronics due to Normal Shock Waves in Liquid 1952
Apogee Engine Nozzle during Orbit Raising Mission
Master Anand S., Mahalakshmi N. V., Amit Kumar Sharma and Sivaramkrishnan R.
Thermal Performance Evaluation of Planar Array in KAPLANA-1 Spacecraft 1957
Satishchandra C. Wani, Alok Shrivastava and Vijay K. Kaila
Thermal Analysis of 50-Pin D-Sub Connector 1963
Neeraj Kumar Satya andAlok Shrivastava
Heat Transfer Analysis for Heat Loss Estimation during Canister Launch of a Missile 1970
A. K. Kachroo, G. Vijayakumar and M. Sambasiva Rao
Heat Transfer Analysis for Passively Cooled Scramjet Engine WallsG. Vijayakumar, A. K. Kachroo and M. Sambasiva Rao
Development ofDual Channel Axially Grooved Aluminum-Ammonia Heat
Pipes for Spacecraft ApplicationDinesh Kumar, Purushothama Rao H. and P. P. Gupta
Design and Realization of an Ejector Nozzle for High Pressure COIL
Gaurav Singhal, P. M. V. Subbarao, R. Rajesh, Mainuddin, R. K. Tyagiand A. L. Dawar
Coupled Transient Heat Transfer Analysis for High Speed Flow through a
Divergent Duct
S. Rameche Candane, S, P, Venkateshan and C, Balaji
Numerical Simulation of the Flow Inside a Model Can-Type Gas Turbine
Combustor by Using STAR-CDSubhash Deo Hiwase, Pravin V. Kulkarni and Santoshkumar Reddy
Computation of Velocity, Pressure and Temperature Profiles in a
Cryogenic Turbo-expanderSubrata K. Ghosh, N. Seshaiah, Ranjit K. Sahoo and Sunil K. Sarangi
1976
1983
1991
1999
2005
2015
XXX
HMT-2006-C281 Aero-Thermal Computations of a Transonic High Pressure 2-D Linear 2023 356
Turbine Cascade
Padmesh Mandloi and Bhavin A. Desai
HMT-2006-C282 A CombinedCFD and Network Approach for Conjugate Heat Transfer 2028 356
Analysis ofSimulated Blade CoolingB. V. N. Ramakumar, N. Kulasekharan and B. V. S. S. S. Prasad
HMT-2006-C283 Flow Distribution inside Internally Cooled Gas Turbine Blade without 2036 356
FilmCooling HolesSachin L. Borse and A. W. Date
HMT-2006-C284 Validation ofHigh Pressure Turbine Nozzle Guide Vane Heat Transfer Analysis 2042 357
V. Kesavan, M. Ravitej, S. A. Vasudev and Meera Kaushal
HMT-2006-C285 Experimental Investigation on Heat Transfer Characteristics of Film Cooling 2048 357
with Parallel Discrete Holes
G. F. Ma, J. Z. Zhang and W. H. Yang
HMT-2006-C286 Numerical Investigation of Entrance Condition Effects on Film-Cooling 2054 357
Performance
y. P. Wang and P. X. Jiang
XI—Heat Transfer in Manufacturing Processes 2062-2252 359-368
HMT-2006-C287 Modeling of Heat and Solute Transport during Solidification ofTernary Alloys 2062 361
A. Kumar and P. Dutta
HMT-2006-C288 Numerical Simulation ofFreckles Formation During Directional Solidification of 2072 361
Aqueous Ammonium Chloride
/. Jain, A. Kumar and P. Dutta
HMT-2006-C289 Transport Phenomena in the Production and Use ofExpanded Polystyrene 2080 361
Patterns in Lost Foam CastingX. J, Liu, R. C. Bhat, S. H. Bhavnani and R. A. Overfelt
HMT-2006-C290 Analysis and Suppression of Base Separation in the Casting of a Cylindrical Ingot 2088 362
S. Ravi Annapragada, Dawei Sun, and Suresh V. Garimella
HMT-2006-C291 Development of a Mathematical Model to Predict the Cooling Time of Cold 2098 362
Rolled Coils in the Coil Cooling and Storage Unit (CCSU) of CRM at TATA Steel
Tathagata Bhattacharya, Vikas Singh and Sanjay Chandra
HMT-2006-C292 Assessment of Various Non-Linear Differencing Schemes for the 2109 362
Prediction of Mixing in a Tundish
Pradeep K. Jha
HMT-2006-C293 Effects of Geometrical Parameters on Mixing in a Continuous Casting Tundish 2120 363
Sunil S. Shinde, Pradeep K. Jha andAjitL. Mujumdar
HMT-2006-C294 Simulation of Hollow Continuous Casting 2127 363
Siddhartha Shankar Choudhury, Pradeep K. Jha and P. S. Robi
HMT-2006-C295 Designing Turbulence Inhibitor for a Single Strand Slab Caster Tundish through 2134 363
Mathematical Modeling
Rajeev Kumar Singh, Amitava Paul and A. K. Ray
HMT-2006-C296 Thermal Analysis and Modeling in Squeeze Casting 2141 363
Himadri Chattopadhyay
HMT-2006-C297 Heat Transfer Characterization in the Mould of a High Speed Continuous 2146 364
Steel Slab Caster
S. K. Das, K. M. Godiwalla and S. P. Mehrotra
xxxi
HMT-2006-C298 Mathematical Modelling of Thermal Transport Processes in Coke Oven
S. K. Das and K. M. Godiwalla
2154
HMT-20O6-C299 Modelling Heat/Mass Transfer and Combustion in a Vertical Shaft Brick Kiln (VSBK)2162
P. Kane, S. Maithel, A. Jain and A. W. Date
HMT-2006-C300 Numerical Simulation of Baking in a Hybrid Jet Impingement and Microwave
(JIM) Oven
Dilek Kocer and Mukund V. Karwe
HMT-2006-C301 Numerical Simulation of Smelting Processs in a Reverberatory Furnace
S. M. H. Sarvari, S. H. Mansouri and E. Niknejad
2168
2176
2183HMT-2006-C302 Mathematical Modeling and Simulation of Hydrofluorination of Uranium
Dioxide in a Rotary Kiln
S. Manna, R. K. Saha, S. B. Roy and S. K. Satpati
HMT-2006-C303 Heat and Mass Transfer Calculations during Co-Deposition of Si02 and 2191
Ge02 in the Modified Chemical Vapor Deposition Process
Anugrah Singh
HMT-2006-C304 Welding Considerations for Space-Based Repair of Metallic Components 2196
Jogender Singh, Namhyun Kang and Anil K. Kulkarni
HMT-2006-C305 Blown Powder Laser Cladding Process—Role of Dimensionless Parameters 2204
Subrata Kumar and Subhransu Roy
HMT-2006-C306 Modeling Solutal Transport of Nd Dopants in Moltent YAG During the Czochralski 2212
Growth ofNd: YAG Crystals
Jyotirmay Banerjee, Vinay Kumar and K. Muralidhar
HMT-2006-C307
HMT-2006-C308
HMT-2006-C309
Numerical Simulation of Laminar Natural Convection in a Laterally Heated Vertical 2220
Cylindrical Enclosure with Application to Czochralski CrystalGrowth—Unsteady RegimeAmitesh Kumar and Subhransu Roy
Numerical Simulation of Laminar Natural Convection in a Laterally Heated Vertical 2228
Cylindrical Enclosure with Application to Czochralski Crystal Growth—Steady State RegimeMitesh Vegad and Subhransu Roy
Computation of Heat Transfer in Lubricated Thrust Bearing by usingLobatto Quadrature TechniqueR. K. Sharma and R. K. Pandey
2237
HMT-2006-C310 Prediction of Heat Generations and Temperature Distributions at Critical Contact 2243
Zones ofHigh-Speed Rolling BearingsR. Kashyap and R. Tiwari
HMT-2006-C311 Water Channel Design and Optimisation for Cooling ofX-Ray Head 2249
Dhanushkodi G. and Parameswaran N.
XII—Miscellaneous Applications 2253-2483
HMT-2006-C312 Enhancement of Reduction of Mass Transfer of Volatile Organic Compounds 2253
through Photocatalytic Reactor for Improvement of Indoor Air QualityP. Deb
HMT-2006-C313 Generalized Flow Equation, Validation and Correction Factor Guidelines for the 2261
Mixture of Gas Flow through Venturimeter
KevatM. D., Choksi P. G., Patel A. R. and Prabhakaran P.
364
364
365
365
365
366
366
366
367
367
367
368
368
368
369-382
371
371
xxxii
HMT-2006-C314 Thermal Analysis of Metal Glass Ribbon Formation with Spinning WheelM. Prasad
2268 372
HMT-2006-C315
HMT-2006-C316
HMT-2006-C317
HMT-2006-C318
HMT-2006-C319
HMT-2006-C320
HMT-2006-C321
HMT-2006-C322
HMT-2006-C323
HMT-2006-C324
HMT-2006-C325
HMT-2006-C326
HMT-2006-C327
HMT-2006-C328
HMT-2006-C329
HMT-2006-C330
Energy Simulations of Commercial Buildings for DOE's Standards 2274
Development ProjectsSriram Somasundaram, David W. Winiarski,
Ronald E. Jamagin, Z. Todd Taylor
Climate Chamber Study of Comfort Parameters in Desiccant Air Conditioning 2282
CombinedWith Chilled CeilingAhmadul Ameen, Mohd. Najib bin Yusoffand Khizir Mahmud
Cross Wind and Natural Draft Dry Cooling Towers
M. H. Kayhani, M. Shahsavan and A. Abbasnejad
Drag and Cooling of a Building due to Wind
Arnab Sarkar, Swasti Sundar Mondal and Debojyoti Mitra
Simulation of Heat/Mass Transfer and Electro-chemical Reactions in
Solid OxideFuel Cell—ANovel ApproachK. K. Ramachandran and A. Ramaraju
Numerical Simulation of Transport Processes in a Proton Exchange 2311
Membrane Fuel Cell AssemblyBansode A. S., Rajesh Kumar T„ Muralidhar B., Siddharth Patel,
T. Sundararajan and Sarit K, Das
Numerical Modelling of Fuel Cells 2319
F. Arpino, N. Massarotti and P. Nithiarasu
An Integrated Thermo-Fluid Analysis of Electro-osmotic Separation of 2327
BiologicalMacro-molecules in Micro-channels
Siddhartha Das, Tamal Das and Suman Chakraborty
Parameter Planning for Interstitial Laser Photo-coagulation based on a 2335
Mathematical Model Characterizing the Dynamic Laser-Tissue Interaction
S. C. Jiang and X. X. Zhang
Capillary Flow ofBlood into a Micro-fluidic Channel
Suman Chakraborty
Assessment of Freezing Processes in Mammalian Ovarian Tissue
Guanglei Li and Ram V. Devireddy
Rational Design of Cryo-preservation Protocols for Adipose Tissue Derived
Adult Stem Cells
Ram V, Devireddy, Sreedhar Thirumala and Jeffrey M. Gimble
Experimental and Numerical Analysis of Short Pulse Laser Interaction with 2363
Layered Tissue Media for Bio-medical Imaging
Soumyadipta Basu and Kunal Mitra
Transport to Osteoblast-Seeded Micro-carriers in a Rotating Wall Bioreactor: 2371
Fluid Mechanics and Mass Transfer
K. Mukundakrishnan and P. S. Ayyaswamy
Design and Experimental Study of a Cooler for a Laptop Computer 2376
Chew Lee Khuan and Mani Maran Ratnam
Multi-Stack Micro-channel Heat Sinks with Counter Flow Arrangement for 2380
Efficient Electronics Cooling
Pradeep G. Hegde, M. Z. Abdullah, A. Y. Hassan,
M. S. Rajagopal and K N. Seetharamu
372
372
2287 373
2293 373
2303 373
374
374
374
375
2342 375
2350 375
2356 376
376
376
377
377
xxxiii
HMT-2006-C331 Simulation of Gas Flow through Micro-Heat Sinks
Amit Agrawal and Anandroop Bhattacharya
HMT-2006-C332 Numerical Modeling of Thermo Hydraulic Performance of Micro Channels
Arunabha Chanda, Asis Mazumdar and Nirmalya Bayal
HMT-2O06-C333 Developing Flow in Micro-channels using Continuum Model with Slip
Boundary Conditions
Satish Kalaga and Pradip Majumdar
HMT-2006-C334 Micro-channel Heat Sinks for Electronics Cooling—A Review
X. J. Wei and Yogendra Joshi
HMT-2O06-C335 Convective Heat Transfer Enhancement in Nanofluids
Jacopo Buongiorno
HMT-2006-C336 Experimental Study of Energy Exchange Attending Electron Emission
from Carbon Nano-tubes
Tyler L, Westover, Timothy S. Fisher and Jun Xu
2385 377
2393 377
2399 378
2407 378
2417 378
2424 379
HMT-2006-C337
HMT-2006-C338
HMT-2006-C339
HMT-2006-C340
HMT-2006-C341
Experimental andNumerical Study ofLiquid Flow andHeat
Transfer in Micro-tube
Zhuo Li, Wen-Quan Tao, Ya-Ling He and Jia-Xi Lu
Effect of Heat Fluxes on Gas-Dynamic and Strength Characreistics of Tunnel
Nano Turbo-compressor MEMS
A. Soudarev, A. Souryaninov, A. Molchanov, P. Avran and L, Lelait
Probing Transport Mechanisms in Nano-fluids by
Molecular Dynamics Simulations
Jacob Eapen, Ju Li and Sidney Yip
Thermal Conductance Enhancement with Two-Sided
Carbon Nano-tube Interfaces
Jun Xu and Timothy S. Fisher
Design of Fluidised Bed Reactors for Bio-desulfurisation of Petroleum
Oils—Development of CAD (Software) PackagesC. M. Narayanan
HMT-2006-C342 Unsteady Convective Heat Transfer in a Symmetric Wavy Channel for a
Laminar Developing Flow
S. Blancher and R. Creff
HMT-2006-C343 Numerical Simulation ofthe Ventilation and HeatDispersion of the Cabin
for Generator Set
Sihong Song, Weidong Shen and Jianli Wang
HMT-2006-C344 Double Diffusive Heat and Mass Transfer of Micro-polar Fluid in a
Square Enclosure by Finite Element Method
R. Bhargava, S. Sharma and H. S. Takhar
2433
2440
2446
2453
2461
2467
2472
2478
HMT-2006-C345 Double-Diffusive Finger Convection Near Neutral BuoyancyOm Prakash Singh, K. R. Sreenivas and J. Srinivasan
HMT-2006-C346 Experimental Investigation of Flow and Heat Transfer in Micro-channel
R. Kalaivanan, R. Karthikeyan, R. Rathnasamy and R. Sukumaran
Author Index - Plenary and Keynote PapersAuthor Index - Contributory Papers
379
380
380
381
381
381
381
382
2486 382
2494 382
383
387
xxxiv
