Embed Size (px)
Citation preview
Reseller:
• Lightning fast automatic recognition of drill forms and toolpath generation from Surface or Solid models
• Graphic verification of possible collisions between the part and the tool
• Graphically define new measurements to drilling tables
• Generate drilling toolpaths for all operations for all planes or on a selective basis
• Optimum manufacturing (intermediate spaces, maximum drill depth, reaming, etc)
• Group toolpaths for optimal tool usage
• Quickly generate and regenerate toolpaths for all drill forms
• Create drill forms using the given tables
• Save time and money
ProDrillFeature based
Drilling for Mastercam
Distributor:
Moldplus, SACP2190CH-1110 Morges 2Tel.: +41 21 802 2790Fax: +41 21 802 2878
http://[email protected]
Mastercam is a registered trademark of CNC Software, Inc.ProDrill is a product from Tecnocim S.L.
Mastercam 9.1 Mill Entry and above Mastercam Solids to create Drilling Forms
Automatic drilling – Fast and Simple!
ProDrillWhat does
ProDrill provide?
ProDrillrequirements
Feature based Drilling for Mastercam
Manufacturing mold plates requires many different drilling operations. ProDrill automates the drilling tasks of the various form types of the plates and components.
• Simple drilling• Drilling• Counter-boring• Reaming and Boring• Chamfering and Counter-sinking• Threading• Easily define forms with no restrictions (Size, Depth, etc.)
With one click of the mouse all the holes are identified and the processes from the drilling processes library are automatically applied to the drill forms.
From simple plates to complex multi-axis drilling – ProDrill can be used to save time and money in every case.
• Easy to use graphical interface
• Automatically recognize drill forms
• Automatically generate drilling operations from solid and surface models regardless of CAD system origin
• Recognizes drilling features designed on any CAD system (feature based or not)
• Identifies drilling operations automatically on any plane on surface and solid models
• Generate toolpaths for all types of drill forms, in complex models on all tool planes with only a few clicks!
• Check for possible collisions between tools and drilling forms
• Create toolpath groups for optimizing tool usage
• Isolate forms that are not typically defined and generate the machining processes with a few clicks of the mouse
• Recognize forms that need reaming or tapping operations automatically
• Automatically identifies drill forms that exceed maximum drilling depth
• Optimizes tool plane rotation to minimize wasteful empty space movements and reduce machining times
Define your standardrepetitive operations.
Drilling parameters can easily be defined with the graphical interface.
Finished Solid modelwith drill forms
Feature Construction
Source – Solid withdrill location points
The drill form parameters are set after selecting the drilling process from the library table.
Directly from the Operations Manager you can simulate the toolpath with Backplot or Verify.
Prodrill delivers a total solution for almost all drilling methodsWith ProDrill, a Mastercam application, repetitive drilling that previously took hours can now be done in a few clicks! Rapid ROI!Automatically identifies drilling operations independent of the CAD system source. Functions automatically with surface and Solid models from any CAD system.Automatically create and insert complex drilling geometry and operations.
3D part with many different types of drill forms
With one mouse click all the complex drilling forms on every toolplane are identified.
With another mouse click all the toolpaths for all planes are generated in a few seconds!
ProDrill gives you easy one click creation of drilling forms with all the associated features. One click more and you have a toolpath. No limit on the number of operations.
Widely usable and highly productive
The standard operations are automatically written to the Operations Manager. You can simulate and control the operations without creating a toolpath!
Easily pick your desired drilling form from the easy to read graphic based dialog window.
Drilling Features
The created drilling geometry is automatically inserted into the Solids Manager.
