Product Catalog

Product Catalog2009-2010

®

??

Innovation Movement by MIS...

All rights reserved. No part of this publication may be reproduced, transcribed, stored in an electronic retrieval system, translated into any language or computer language, or be transmitted in any form whatsoever, without the prior written consent of the publisher. Warning: Only a licensed dentist should use these products.

3.

© MIS Corporation. All Rights Reserved.

Contents.

Implant system. UNO

BIOCOM SEVEN

Surgical Instruments.Drills- Internal irrigation

Drills- ExternalCeramic DrillsTrephine Burs

Thread Forms/ Surgical Tools UNOSurgical Tools

Surgical Instruments

Kits. Advanced Surgical Instrument Kit

Drill Stopper KitsYeung Bone Harvest Kit

Crest Widener KitAbrahami Drill Guide Kit

Bone Compression KitUno Implant Surgical Kit

The Basic Kit/ The Organizer KitConvex Osteotome Set

Osteotome Set and Sinus Lift Osteotome Set

Prosthetic.Impression Coping

CPS- Complete Prosthetic SetReverse Abutment Kits

GBK- Gold Base KitPBK- Plastic Base Kit

Direct System- Screw retained reconstruction tableDirect System- Cemented reconstruction tableDirect System- Screw retained reconstruction

Direct System- Cemented reconstructionMulti Unit System

BarsBall Attachment System

Locator Attachments SystemWide Platform- Screw retained reconstruction table

Wide Platform- Cemented reconstruction tableWide Platform- Screw retained reconstruction

Wide Platform- Cemented reconstruction

Accessoies.Zircon Diamond Burr Set

Prosthetic InstrumentsAbutment Holding System Kit

4BONE4BONE 1cc/ 2cc and 4BONE RCM

MIS-MCU Control UnitThe Crown Set

Material Compositions

Index.

6-258-1112-1718-22

26-3528-29303132333435

36-5338-39404142-4344-4546-4748-49505152-53

54-7956-5758-5960-6162-6364-6566676869707172-7374-7576777879

8081828384-8586-8788-899091

92

4.

© MIS Corporation. All rights Reserved.

MIS, vision is to produce user-friendly implants

and superstructures that offer clinicians simple

and creative procedures and keep our customers

continuously smiling.

5.

6.6.

Biocom

Seven

Uno

7.

Implant system.

The wide range of MIS implant product lines provides a variety of clinical solutions

such as reconstruction of a single tooth, screw-retained or cemented fixed bridges

and overdentures. Furthermore, MIS implants can be used in any surgical and bone

augmentation procedures, from the simplest to the most intricate. All MIS implants

adhere to the highest international standards and have ISO, and CE approvals.

They are made of biocompatible medical grade titanium, and their surface is dual-

roughed by sand blasting and acid-etching procedures.

The MIS self-tapping Seven Implants are especially designed for implantation in a wide range of bone types and bone augmentation procedures. Their new geometric design includes dual threads, three spiral channels stemming from the apex, micro rings on the implants’ neck, and a changing thread thickness along the implant. All MIS Seven implants are supplied with a single use final drill for reducing the heat produced during drilling, resulting in improved osseointegration.

MIS BioCom Implants are titanium cylinder screw type implants that are designed for both two-stage and single stage procedures. They are self tapping with a unique wide thread design, and tapered threads on their apical part.

MIS UNO unique implants are specifically engineered for narrow ridges and tight spaces. The insertion of the UNO implant is a quick and simple one stage procedure. Due to their innovative geometries and advanced surface morphology these unique implants offer high initial stability. These versatile implants can be used to restore single crowns and anterior cemented bridges.

8.

8.

16mm13mm10mm 11.50mm

MO2-10300 MO2-11300 MO2-13300 MO2-16300

Ø 3mm

Ø 3.50mm

Ø 3mm

MO1-16300MO1-10300 MO1-11300

MO1-10350 MO1-11350 MO1-13350 MO1-16350

MO1-13300

Screw type implant range.

Type

Length

One piece implant

One piece implant


One Piece implants

Narrow Two Piece implants

Narrow Two Piece implant

9.

9.

1200-1500

1.90 2

900-1200

2.40

700-900

3

15-25

MO1-10300

MO1-13300

MO1-11300

MO1-16300

Ø2.7mm

6.3mm

3

L

Uno screw type implants Ø 3mm One piece.

Ø3mmlength 10mm

Ø3mmlength 13mm

Ø3mmlength 11.50mm

Ø3mmlength 16mm

Dimensions

Titanium grade 5

Material DescriptionCatalog No.

Ø 3mm Implant Procedure

Drill Speed (RPM)

Diameter

Procedure recommended by MIS cannot replace the judgment and the experience of the surgeon

Abutment Part:acid-etched

Implant Part:Sand Blasted and acid-etched

10.

1200-1500

1.90 2

900-1200

3

700-400

2.40

700-900

3.50

15-25

10.

MO1-10350

MO1-13350

MO1-11350

MO1-16350

Ø

2.7mm

6.3mm

3.50

L

Uno screw type implants Ø 3.50mm One piece.

Ø 3.50mm Implant Procedure

Drill Speed (RPM)

Diameter


Ø3.50mmlength 10mm

Ø3.50mmlength 13mm

Ø3.50mmlength 11.50mm

Ø3.50mmlength 16mm

Titanium grade 5

Dimensions Material DescriptionCatalog No.

Abutment Part:acid-etched

Implant Part:Sand Blasted and acid-etched

11.

11.

1200-1500

1.90 2

900-1200

2.40

700-900

3

15-25

L

2mm

MO2-10300

MO2-13300

MO2-11300

MO2-16300


Drill Speed (RPM)

Diameter

Catalog No.

Ø 3mmlength 10mm

Ø 3mmlength 13mm

Ø 3mmlength 11.50mm

Ø 3mmlength 16mm

Dimensions

TitaniumGrade 5

Material Description

Uno screw type implants Ø 3mm Narrow.


Sand Blasted acid-etched

12.

12.

MF4-13330 MF4-16330

13mm8mm 16mm11.50mm10mm

MF4-10330

MF4-08375 MF4-10375 MF4-11375 MF4-13375 MF4-16375

MF4-08420 MF4-10420 MF4-11420 MF4-13420 MF4-16420

MF4-11330

Ø 3.30mm

Ø 4mm

Ø 5.5mm

Ø 5mm

Ø 6.3mm

Ø 3.75mm

Ø 4.20mm

Ø 5mm

MC1-00375

MF4-08500 MF4-10500 MF4-11500 MF4-13500 MF4-16500

MF4-08600 MF4-10600 MF4-11600 MF4-13600

MH-03375MH-04375MH-05375MH-06375

MH-53375MH-54375MH-55375MH-56375

MC1-00470

MH-W3500MH-W4500MH-W5500

3/4/5mm

3/4/5/6mm

3/4/5/6mm

3/4/5mmMH-W3630MH-W4630MH-W5630

Ø 6mm


Type

Length

Screw type implant standard platform

Wide

Standard



Screw type implant wide platform


Standard and wide platform.

Implants cover screws and healing caps.Available in gingival heights: 3,4mm

Available in gingival heights: 5,6mm

Implants cover screws and healing caps.

13.

13.

2.45

Ø 3.75

Ø 3.30

L

1200-1500

1.90 3.30 2.80 2

900-1200

2.80

500-700

3.30 3.75

200-500

3.30

15-25 15-25

MF4-10330

MF4-11330

MF4-13330

MF4-16330

BioCom screw type implants Ø 3.30mm standard platform.

Description

Screw type implant internal hex.

Material

TitaniumGrade 5

Sand Blasted Acid-Etched

Dimensions

Ø 3.30mmlength 10mm

Ø 3.30mmlength 11.50mm



Catalog No.


Optional for dense bone

Drill Speed (RPM)

Diameter


Countersink(MT-GDN30)

14.

14.

2.45

Ø 3.75

Ø 3.75

L

1200-1500

1.90 3.20 2

900-1200

2.80

500-700

3.20

400-700

3.75

200-500

3.75

15-25

3.75

15-25

MF4-08375

MF4-10375

MF4-11375

MF4-13375

MF4-16375

BioCom screw type implants Ø 3.75mm standard platform.

Description


Material

TitaniumGrade 5


Dimensions

Ø 3.75mmlength 8mm





Catalog No.



Drill Speed (RPM)

Diameter



15.

2.45

1mm

0.4mm

Ø 3.75

Ø 4.20

L

1200-1500

1.90 2 2.80 3.80 4.20 4.20 4.20 3.20 3.80

900-1200

500-700

400-700

200-500

200-500 15-25 15-25

MF4-08420

MF4-10420

MF4-11420

MF4-13420

MF4-16420

DescriptionCatalog No.


Material

TitaniumGrade 5


Dimensions

Ø 4.20mmlength 8mm





BioCom screw type implantsØ 4.20mm standard platform.



Drill Speed (RPM)

Diameter


(MT-GDN50)Countersink

16.

16.

1mm0.4mm

Ø4.50

Ø5

L

1200-1500

1.90 4.50 2

900-1200

2.80

500-700

3.20

400-700

3.80

400-600

4.50

400-600

5

200-500

5

15-25

5

15-25

MF4-08500

MF4-10500

MF4-11500

MF4-13500

MF4-16500

2.45

BioCom screw type implants Ø 5mm wide platform.



Dimensions

Ø 5mmlength 8mm

Ø 5mmlength 10mm


Ø 5mmlength 13mm

Ø 5mmlength 16mm


Drill Speed (RPM)

Diameter

Material

TitaniumGrade 5





17.

1200-1500

1.90

900-1200

2

500-700

2.80

400-700

3.20

400-600

3.80

400-600

300-500

300-500

200-500 15-25 15-25

4.50 5 5.50 5.50 6 6 6

1mm

0.4mmØ 4.50

Ø 6

L

MF4-08600

MF4-10600

MF4-11600

MF4-13600

17.

2.45



Material

TitaniumGrade 5


Ø 6mm

Dimensions

Ø 6mmlength 8mm

Ø 6mmlength 10mm


length 13mm

BioCom screw type implants Ø 6mm wide platform.



Drill Speed (RPM)

Diameter



18.

18.

MF7-13375 MF7-16375

13mm 16mm11.50mm8mm 10mm

MF7-10375MF7-08375

MF7-08420 MF7-10420 MF7-11420 MF7-13420 MF7-16420

MF7-08500

MF7-08600

MF7-10500

MF7-10600

MF7-11500

MF7-11600

MF7-13500

MF7-13600

MF7-16500

MF7-11375

Ø 3.75mm

Ø 4.20mm

Ø 5mm

Ø 6mm

MC1-00375

MH-03375MH-04375MH-05375MH-06375

MH-53375MH-54375MH-55375MH-56375

3/4/5/6mm

3/4/5/6mm

Ø 4mm

Ø 5.5mm

MC1-00470

MH-W3500MH-W4500MH-W5500

MH-W3630MH-W4630MH-W5630

3/4/5mm

3/4/5mm

Ø 5mm

Ø 6.3mm

®

Standard and wide platform.

Screw type implant range

Type

Length



Standard



Wide



19.

1200-1500

1.90 2

900-1200

2.80

500-700

2.80 3.60

200-400

3.75

200-500

3.75

15-25

MF7-08375

MF7-16375

MF7-10375

MF7-11375

MF7-13375

Ø 3.10

Ø 3.75

2.45

Ø 2.80

Ø 3.60

®

Seven screw type implants Ø 3.75mm standard platform.

Final Drill A specially designed final drill for 8mm, 10mm, 11.50mm, 13mm and 16mm implants is supplied with every implant, allowing a short and safe drilling procedure.


Drill Speed (RPM)

Diameter

It is recommended to use the final drill in bone types 1 and 2

* all implants include the relevant cover screw and final drill


TitaniumGrade 5


Ø 3.75mmlength 8mm





DimensionsCatalog No. DescriptionMaterial

For bonetype 1&2

For bonetype 3&4

Final drill

OR

Countersink


(MT-GDN33)

20.

20.

1200-1500

1.90 2

900-1200

2.80

500-700

3.20

400-700

3.30 4.10

200-400

4.20

200-500

4.20

15-25

MF7-08420

MF7-16420

MF7-10420

MF7-11420

MF7-13420

Ø3.30

Ø4.10

Ø 3.70

Ø 3.75

2.45

Ø 4.20

0.4mm

®

Seven screw type implants Ø 4.20mm standard platform.



Drill Speed (RPM)

Diameter




DimensionsCatalog No. Description


Material

TitaniumGrade 5


Ø 4.20mmlength 8mm





For bonetype 1&2

For bonetype 3&4

Final drill

OR


21.

21.

1200-1500

1.90 2

900-1200

2.80

500-700

3.20

400-700

3.80

400-600

4.10 4.90

200-400

5

200-500

5

15-25

MF7-08500

MF7-10500

MF7-11500

MF7-13500

MF7-16500

Ø 4.50

Ø 4.50

Ø 5

0.4mm

Ø 4.10

Ø 4.90

2.45

®



Seven screw type implants Ø 5mm wide platform.



Drill Speed (RPM)

Diameter




TitaniumGrade 5

Ø 5mmlength 8mm

Ø 5mmlength 10mm

Ø 5mmlength 13mm


Ø 5mmlength 16mm

For bonetype 1&2

For bonetype 3&4

Final drill Countersink


(MT-GDN50)

22.

22.

Ø 5.10

1200-1500

1.90

900-1200

2

500-700

2.80

400-700

3.20

400-600

3.80

400-600

4.50

300-500

5

200-400

5.10 5.90

200-500

6 6

15-25

MF7-08600

MF7-10600

MF7-11600

MF7-13600

Ø 4.50

Ø 5.50

Ø 6

0.4mm

Ø 5.90

2.45

®

Seven screw type implants Ø 6mm wide platform.


Drill Speed (RPM)

Diameter




TitaniumGrade 5

Ø 6mmlength 8mm

Ø 6mmlength 10mm

Ø 6mmlength 13mm


For bonetype 1&2

For bonetype 3&4

Final drill

OR

Countersink



Final Drill A specially designed final drill for 8mm, 10mm, 11.50mm and 13mm implants is supplied with every implant, allowing a short and safe drilling procedure.


(MT-GDN50)

23. Mountless.

All MIS BIOCOM and SEVEN implants will now be supplied without mounts. These successful implants remain unchanged, but will be supplied without the blue mounts, and will be packaged in distinctive and easily recognizable boxes (Page 24). The BIOCOM and SEVEN mountless implants, have their own tools, available as a set (MK-0037) or purchased separately.

Mountless Tube.

24.Packaging.

Mountless special identification strips.

Implant identification markingsQuick identification of implant size and length. Upper number represents the implant diameter, while the lower represents implant length.

The implant packaging allows a convenient, logical arrangement in the drawer and immediate identification of the parts.

The new packaging is designed for easy identification and use of our new mountless implants. Quick identification features include distinctive color coded boxes, large easy to read lettering and a bright yellow strip which specifically identifies the product as mountless. Added features include a pull tab, for quick and easy opening and newly designed polystyrene tubes for quick and easy extraction of the implants.

Easy pulling tab The pull out tab is easily identified which facilitates quick and easy opening.

25.

Implant identification markingsThe cap of the outer tube is color-coded according to the implant diameter.

White6

26.

Surgical Instruments.

The wide variety of MIS tools is specially designed with the purpose of facilitating a safe, simple and short implantation procedure.

28.

MaterialDimensions

Stainless steelMarking Drill Ø 1.90mmlength 34mm

Ø 2mmlength 26.7mm

Stainless steel

Ø 2mmlength 37.3mm

Stainless steel


Stainless steel


Stainless steel

Ø 3mmlength 37.6mm

Stainless steel


Stainless steel


Stainless steel


Stainless steel


Stainless steel


Stainless steel

MT-TD110

Short Pilot Drill

Pilot Drill

Short Twist Drill

Twist Drill

Twist Drill

Short Twist Drill

Twist Drill

Twist Drill

Short Twist Drill

Twist Drill

MT-TDS20

MT-TD200

MT-TDS28

MT-TD280

MT-TD300

MT-TDS32

MT-TD320

MT-TD350

MT-TDS38

MT-TD380

Ø 5mmlength 38.2mm

Stainless steel


Stainless steel


Stainless steel

Ø 5mmlength 28.9mm

Stainless steel


Stainless steel


Stainless steel

Twist Drill

Twist Drill

Short Twist Drill

Short Twist Drill

Short Twist Drill

Twist Drill

MT-TD500

MT-TD550

MT-TDS55

MT-TDS50

MT-TDS45

MT-TD450

Ø 3.75/4.2mmlength 26mm

Stainless steelMT-GDN33 Countersink for standard platform

Ø 5/6mmlength 26.8mm

Stainless steelMT-GDN50 Countersink for wide platform

Drills.Internal irrigation

Color coding:

Drill diameter 2.80mm

Drill diameter3mm / 3.20mm

Drill diameter3.50mm / 3.80mm

Drill diameter 4.50mm

Drill diameter 5mm / 5.50mm

Note: short drills are only marked with 8, 10 and 11.5mm depths.

30.

MT-SMD10

MT-TDN19

MT-TDN20

MT-TDN28

MT-TDN30

MT-TDN32

MT-TDN35

MT-TDN38

MT-TDN50

MT-TDN45

MT-TDN55

Twist Drill 3.20mmMT-TDN32

length 27.5mm


Stainless steel

Stainless steel

Stainless steel

Stainless steel

Stainless steel

Stainless steel

Stainless steel

Stainless steel

Stainless steel

Stainless steel

Stainless steel

MaterialDimensions

Ø 2mmlength 37.3mm


Ø 3mmlength 37.6mm




Ø 5mmlength 38.2mm



Drills.External irrigation

Marking Drill

Pilot Drill

Twist Drill

Twist Drill

Twist Drill

Twist Drill

Twist Drill

Twist Drill

Twist Drill

Twist Drill

Spade Marking Drill

31.

Twist Ceramic Drill 2.80mmMT-CRD28

Dimensions: Ø 2.10mmlength 28.5mm

Ø 2mmlength 33.5mm


Material: Zircon-dioxide ceramics

Zircon-dioxide ceramics

Zircon-dioxide ceramics

Marking Drill Pilot Drill Twist Drill

Ceramic Drills.External irrigation

The features of the Ceramic Drills include reduced vibration; pleasant, smooth operation; and continuous substance removal, whether used in implantology or oral surgery.

The MIS Ceramic Drills are made of a high performance ceramic mix of partly stabilized by yttrium and aluminium ceramic. The mixture of these two established materials provides MIS Ceramic Drills with an above-average bending strength of 2000 MPa. In comparison, the bending strength of zirconium oxide ceramic, which is used, among other things, for manufacturing root posts, is 1200 MPa.

Advantages- Free of metal - Biocompatible - Corrosion free

MT-CRD21 MT-CRD20 MT-CRD28

32.Trephine Burs.Internal irrigation

Hand Trephine Bur incl. Key

Trephine

Trephine

Trephine

Inner Ø6mm Outer Ø7mm

length 37mm Inner Ø4mm Outer Ø5mm



Stainless steel

Stainless steel

Stainless steel

Stainless steel

Dimensions Material

Manual Trephine Bur, with replaceable drilling tube, /6 mm, adjustable depth, gradation 1mm, inc. key.

Hand Trephine Bur key

MT-HTR10

MT-00400

MT-00500

MT-00600

33. Thread forms.BioCom

Dimensions Material

All MIS implants are self tapping. In most cases thread forms are not necessary.However, in bone type 1 it is recommended, to use thread forms according to MIS implantation procedures.

Surgical Tools.UNO

Ø3.30mm length 28mm

Stainless steelShort Thread FormMT-TNS33


Stainless steelLong Thread FormMT-TNL33









Ø5mm length 28mm


Ø5mm length 36mm


Ø6mm length 28mm


Ø6mm length 36mm


length 12mm Stainless steelUno one piece implant short key MT-HKS15

length 17mm Stainless steelUno one piece implant long key MT-HKL21

length 20mm Stainless steelUNO One piece implant insertion toolMT-HKO21

length 22mm Stainless steelLong ratchet adapter for narrow implantMT-HRL27

length 22mm Stainless steelUNO one piece implant motor adapter, shortMT-UMS21

length 15mm Stainless steelShort ratchet adapter for narrow implantMT-HRS27

length 30mm Stainless steelUNO one piece implant motor adapter, longMT-UML21

34.

Dimensions Material

All MIS implants are self tapping. In most cases thread forms are not necessary.In bone type 1 it is recommended, however, to use thread forms according to MIS implantation procedures.

Surgical Tools.Biocom, Seven

*should not be used for implant insertion

length 22.5mm Stainless steelShort Motor Adapter for Int. Hex. Connection MT-MMH10

Ø3.20/2mm length 24mm

Stainless steelMT-PP001 Parallel Pin

length 10mm Stainless steelMT-HW001 Hand Wrench

length 16mm Stainless steelMT-HDS30 Short Hex. Drive 0.05”

length 22mm Stainless steelMT-HDL30 Long Hex. Drive 0.05”

length 22mm Stainless steelMT-SMK13 Short Motor Key Adapter 0.05"

length 30mm Stainless steelMT-LMK13 Long Motor Key Adapter 0.05"

length 28.7mm Stainless steelMT-DE001 Drill Extender

length 18mm Stainless steelMT-HHK24 Hex. Hand Key for Int. Hex. Connection

length 25mm Stainless steelMT-MMH20 Long Motor Adapter for Int. Hex. Connection

length 22mm Stainless steelMT-MRH20 Hex. Ratchet Long Adapter for Int. Hex. Connection

length 16mm Stainless steelHex. Ratchet Short Adapter for Int. Hex. Connection MT-MRH10

35. Surgical Instruments.

Dimensions:

Dimensions:

Dimensions:

Dimensions:

Material:

Material:

Material:

Material:

Thread Form Adapter

length 14mm

Stainless steel

MT-TFA01

Ratchet

length 75mm

Stainless steel

MT-RI030

Ø3.20 mm length 28.5mmStainless steel

Body Try in 3.20mm MT-BT032





Body Try in 2.80mm


MT-BT028

Ø5.50mm length 28.5mmStainless steel


Ø5mm length 28.5mmStainless steel

Body Try in 5mm MT-BT050

Surgical Adapter Driver

length 120mm

Aluminum + Stainless steel

MT-MSD20

Hammer Solid-Plastic Insert


MT-MAL10Implant site depth probe 8/10/11.50/13/16mm

Ø1.80/2.70mm length 100mm

Ø5.5mm length 75mm

Stainless steel Stainless steel

MT-BTI10

Body Try in 2mm MT-BT020

Ø2 mm, length 28.50mmStainless steel

*

*

should not be used for implant insertion

Motor Tissue Punch MT-TP420

Ø4.2 mm, length 29.50mmStainless steel

Implant Direction Indicator

length 15mm

Stainless steel

MT-DI001Tissue Punch

length 28mm

Stainless steel

MT-TP500

Stainless steel

Torque wrenchMT-RI040

length 80mm

CT-HCK01Holding abutment mount key

36.

37.

Kits.

Ongoing research and development efforts by

MIS engineers and scientists have produced

state-of-the-art kits that simplify common

procedures and provide creative solutions

for dealing with complex cases.

38.MIS presents the Advanced Surgical Kit. The kit includes tools for one stage Mistral implants, as well as tools for two stage Biocom and Seven mountless implants.

MK-0035

MK-EI35 (External irrigation drill version also includes)

MK-IR35 (Internal irrigation drill version also includes)

Mistral abutment extractorHolding abutment/mount keyBody try in 2mmBody try in 2.80mmBody try in 3.20mmBody try in 3.80mmBody try in 4.50mmBody try in 5mmBody try in 5.50mmDrill extenderImplant Direction IndicatorCountersink for standard platformCountersink for wide platformHand key for int. hex. connectionShort screwdriver for 0.05" hex.Long hand screwdriver for 0.05" hex.Insertion tool for Mistral octagon implantHand wrenchLong motor key adapter 0.05"Short motor adapter for int.hex.connectionLong motor adapter for int.hex.connectionHex. ratchet short adapter for int. hex. connectionHex. ratchet long adapter for int. hex. connectionParallel pinRatchet wrenchShort motor key adapter 0.05"

Pcs

Marking drill 1.90mmPilot drill 2mmTwist drill 2.80mmTwist drill 3.20mmTwist drill 3.80mmTwist drill 4.50mmTwist drill 5mmTwist drill 5.50mm

Marking drill 1.90mmPilot drill 2mmTwist drill 2.80mmTwist drill 3.20mmTwist drill 3.80mmTwist drill 4.50mmTwist drill 5mmTwist drill 5.50mm

CT-CE140CT-HCK01MT-BT020MT-BT028MT-BT032MT-BT038MT-BT045MT-BT050MT-BT055MT-DE001MT-DI001MT-GDN33MT-GDN50MT-HHK24MT-HHR07MT-HHR13MT-HK310MT-HW001MT-LMK13MT-MMH10MT-MMH20MT-MRH10MT-MRH20MT-PP001MT-RI030MT-SMK13

MT-TDN19MT-TDN20MT-TDN28MT-TDN32MT-TDN38MT-TDN45MT-TDN50MT-TDN55

MT-TD110MT-TD200MT-TD280MT-TD320MT-TD380MT-TD450MT-TD500MT-TD550

||||||||

||||||||

11111111112111111111111311

11111111

11111111

Kit Contents:

||||||||||||||||||||||||||

39. Advanced

Surgical Instrument Kit.

Additional advantages of the Surgical Instrument Kit:

It is made of medically approved plastic.

It can be fully sterilized using an ultrasonic bath, with a temperature that does not exceed.

It is small in size and, therefore, easy to store.

The modular trays represent the optimal solution in terms of cleaning, decontamination and sterilization due to the absence of hidden surfaces. There is an optimization of the steam flow for better elimination of condensation.

40.Drill Stopper Kits.

The Drill Stopper Kits ensure the dental surgeon simple and accurate depth control.

Stoppers

IN Insert

OUT Insert Drill

Five sleeves for standard implants in 8, 10, 11.5, 13 and 16mm with different-colored rings for each diameter.

Teflon tube simplifies the insertion of the drill into the stopper sleeve.

Teflon tube simplifies the removal of the drill from the stopper sleeve.

Color-coded drill matches sleeve color.

Simple.Quick, easy assembly.

Fast.Color coding for immediate identification of sleeve diameter.

Clear. Clearly arranged matching depth sleeves from 8mm to 16mm.

Safe. Safe drilling to planned depth.

The kit is available in 5 diameters. The MIS Stopper Kit fits MIS drills, enabling the doctor to drill to the exact desired depth during implantation. It is simple to use and available in different diameters (2mm, 2.8mm, 3.2mm, 3.8mm, 4.5mm).

Kit Contents:

Ø 2mm - Standard

Ø 2.80mm - Standard




MK-ST020

MK-ST028

MK-ST032

MK-ST045

MK-ST038

41.Yeung Bone Harvest Kit.

The Bone Harvest Kit ensures the dental surgeon’s easy and simple bone harvesting during surgery.

DrillColor-coded drill matches the sleeve color.

Revolutionary dual action-bone harvesting while drilling; The harvested bone can now be used elsewhere, as needed. A simple procedure enables the use of the patient’s own bone, as opposed to substitute materials. Drills can also be used as final drills.

Simple.The bone will accumulate inside the drill’s slot during drilling.

Kit ContentsThe Bone Harvest Kit includes these drills:

Easy.The Bone Harvest Kit can be used as a final drill while harvesting bone.

Safe. The Bone Harvest Kit can be used with MIS drill stoppers, ensuring a safe drilling procedure.

MK-BH26

Ø 2.80mm

Ø 3.20mm

Ø 3.80mm

Ø 4.50mm

Color coding: Drill diameter 2.80mm Drill diameter 3.80mm

Drill diameter 3.20mm Drill diameter 4.50mm

Recommendation:The drill can be used with external irrigation. Start drilling with a slight push and a little continuous pressure. When the drill is taken out, continue rotation to keep the bone inside the drill’s slot.

* The drills should be used for a maximum of 30 drillings.

Recommended Speed:Recommended speed is between20-50 RPM without irrigation.

Material:The bone harvest drills are made of stainless steel and can be easily cleaned.

MT-BC280

MT-BC320

MT-BC380

MT-BC450

42.Crest

Widener Kit.MK-CW28

The MIS Crest Widener is used to widen a narrow alveolar crest which has sufficient height for implantation. By separating the cortical plates new bone is created in between the plates, and the attached gingiva is extracted simultaneously. With this technique, bone augmentation is avoided, the implant is placed in the correct lateral position and sufficient attached gingiva is obtained. In addition, the widener can be used to allow easy distal or mesial orthodontic movements of the molars.

The Crest widener consists of 4 arms, 2 on each side connected with guiding pins and an activating screw. Also provided in the kit: handle key and titanium wire.

43.

Advantages.

Mucosal Distraction leads to sufficient attached gingiva and soft tissue cover (DistractionHistiogenesis).

Implant placement is possible after extremely short post-operative period (5-8 weeks).

Simple, short, minimal traumatic procedure.

Encourages ideal lateral implant placement when needed.

No pain or morbidity at donor site.

Minimally compromised aesthetics.

Less technique-sensitive.

The transported bone is not stripped from periostium, therefore no post operative bone resorption.

44.Abrahami Drill

Guide Kit.MK-0011

The Abrahami Drill Guide Kit has been designed to enable the dental surgeon to accurately locate and drill the holes of two or more consecutive implants with optimal spacing, angulation and parallelism.

Paralleling PinsThese are dual diameter pins where half of their length is 2mm and half is 2.8mm. They enable the surgeon to visualize the implant position and angulation.

There are 4 different blocks:Short and thin:10mm length, 2mm diameter

Short and wide:10mm length, 2.8mm diameter

Long and thin:16mm length, 2mm diameter

Long and wide:16mm length, 2.8mm diameter

Extension Arms

Short

Medium

Long

There are 3 different extension arms:

6 to 8 mm from the centerline of the central block to the holes in the free end of the extension arm.



45.

Optimal parallelismGuides and ensures complete vertical parallelism between the implants.

The stabilization system

The extension arms

Optimal spacing

Optimal angulation

Located within the top of the block and consists of a screw (top) and a spring-loaded ball (inside). It allows the extension pin to be gradually stabilized at the desired length and inclination.

Permit variable bucco-lingual inclinations and mesio-distal locations relative to the central block. In the extension arm’s free end are 2 holes for 2mm and 2.8mm drills in perpendicular planes.

Optimal spacing enables the surgeon to locate the holes for the planned implants with the required inter-implant distance.

Screw

Spring

Ball

Location pin

Optimal angulation enables the surgeon to drill in the most advantageous bucco-lingual angle possible, within anatomic limits.

Before cleaning, the location pins have to be separated as follows: screws, springs, balls and pins. Cleaning and drying the parts is essential for the good functioning of the system. This will avoid erosion of the parts.

Location Pins Ø2mm

Location Pins Ø2.80mm

Extension Arms

Paralleling Pin 20mm

Short 10mm

Short 10mm

6, 7, 8mm

9, 10, 11mm

Short 16mm

Short 16mm

12, 13, 14mm

46.Bone

Compression Kit.MK-0020

The Bone Compression Kit developed by MIS improves the treatment of sinus lifting and anchoring in relatively soft bone types 3 and 4. A simple bone compression procedure enables better implantation, better primary stability, and the prevention of bone loss.

Advantages.

- Prevents traumatic osteotomy- Increases bone density- Increases primary stability- Gradual control of expansion

47.

1

2

3

4

1.6

2.0

2.4

2.8

Ø=2.3

Ø=2.5

Ø=3.1

Ø=3.5

Ø=2.5

Ø=2.7

Ø=3.3

Ø=3.8

Ø=2.8

Ø=3.3

Ø=3.6

Ø=4.2

3.3

3.75

4.2

5

8 10 13

Kit Contents

Convex Compress Screw 1.6/2.8 mm

Convex Compress Screw 2/3.3 mm


Concave Sinus Screw 3 mm

Concave Sinus Screw 4 mm

Short Motor Mount Adapte

Short Ratchet or Hand Wrench Adapter

Long Ratchet or Hand Wrench Adapter

Spade Marking Dril


Long Motor Mount Adapter

Concave Sinus Screw 3.5 mm

Ratchet Wrench

Indications for use:

- Using the osteotomes depends on the bone type.

- Sensitive manual control of the osteotome reduces the risk of perforation of the upper maxilla to a minimum.

Laser marks on the screw indicate heights of 8,10,13 mm.

Flowchart

*Dimensions (mm)

CompressLength

ØApical ØImplant

MO-CO160

MO-CO200

MO-CO240

MO-SO300

MO-SO400

MT-MMA10

MT-MRS10

MT-MRL10

MO-CO280

MT-MMA20

MO-SO350

MT-SMD10

MT-RI030

48.Uno Implant Surgical Kit.

MK-0036

The MIS UNO implant surgical Kit is a small kit which includes drills, tools and a ratchet wrench.

49.

Kit Contents

Pilot drill 2mm external irrigation

Twist drill 2.40mm external irrigation

Body try in 2mm

Parallel pin

Spade marking drill

Ratchet wrench

MT-TDN20

MT-TDN24

MT-BT020

MT-PP001

MT-SMD10

Long ratchet adapter for narrow implantMT-HRL27

MT-RI030

Hex. Ratchet Long Adapter for Int. Hex. Connection

MT-MRH20

Twist drill 3mm external irrigationMT-TDN30

Ball attachment anchor keyMT-BK235

UNO One piece implant insertion toolMT-HKO21

UNO one piece implant motor adapter, short

MT-UMS21

Long Hex. Drive 0.05”MT-HDL30

Long Motor Adapter for Int. Hex. Connection

MT-MMH20

50.The Basic Kit.MK-0014

MK-0014 Kit Contents.

Body try in 2mmBody try in 2.80mmBody try in 3.20mmBody try in 3.80mmDrill extenderCountersink for standard platformLong hex. drive 0.05"Hand wrenchLong motor adapter for int.hex.connectionHex. ratchet short adapter for int. hex. connectionHex. ratchet long adapter for int. hex. connectionParallel pinRatchet wrenchSpade marking drillPilot drill 2mmTwist drill 2.80mmTwist drill 3.20mmTwist drill 3.80mm

Pcs

The MIS Basic Kit is a smaller kit which contains the minimum surgical instruments necessary for implant placement.

The MIS Organizer Kit is a small kit which includes empty places for drills, tools, ratchets, etc.

The Organizer Kit.MK-0012

MT-BT020MT-BT028MT-BT032MT-BT038MT-DE001MT-GDN33MT-HDL30MT-HW001MT-MMH20MT-MRH10MT-MRH20MT-PP001MT-RI030MT-SMD10MT-TD200MT-TD280MT-TD320MT-TD380

||||||||||||||||||

111111111113111111

51.

6mm

11mm

10mm

The MIS Convex Osteotome Set is more commonly used for expanding the bone while preparing the implant site. The Set can also be used in sinus elevation procedures.

Convex

Convex Osteotome Set.

MK-0024

Convex bajonet Osteotome with Stopper

Catalog No. Dimensions Material

Stainless steel

Stainless steelConvex Osteotome with Stopper

MO-CBS20MO-CBS30MO-CBS32MO-CBS40

MO-CS200MO-CS300MO-CS325MO-CS400

Ø2mm Ø3mm Ø3.25mm Ø4mm


52.

8mm10mm

11.5mm13mm

16mm

8mm10mm

11.5mm13mm

16mm

Osteotome Set.MK-0002

The MIS stainless steel Osteotome Set tools are laser marked for depth, and are used for splitting and expanding the bone while preparing the implant site. The implant site osteotome tools in this set has a convex tip.

Convex

Sharp flat

Implant Site Osteotome

Alveolar Ridge Expanding Osteotome


Stainless steel

Stainless steel

MO-IP180MO-IP280MO-IP320MO-IP380MO-IP435

MO-SP300MO-SP450MO-SP550

Ø1.80mm Ø2.80mm Ø3.20mm Ø3.80mmØ4.35mm

Ø3mm Ø4.50mm Ø5.50mm

53.

6mm

11mm

16mm

Sinus Concave Osteotome with Stopper

Sinus Concave bajonet with Stopper


Stainless steel

Stainless steel

MK-0023

The MIS Alveolar Ridge Expanding Osteotomes Set is used for sinus elevation. The Set includes four straight sinus concave osteotome with stoppers, and four sinus concave bayonet tools with stoppers. All tools in this Kit are made of stainless steel.

ConcaveMO-SLS20MO-SLS30MO-SLS32MO-SLS40

MO-SLA20MO-SLA30MO-SLA32MO-SLA40


Ø2mm Ø3mm Ø3.25mmØ4mm

Sinus Lift Osteotome Set.

54.

Prosthetic.

MIS offers a wide variety of superstructures. This provides many options, with an emphasis on simplicity and convenience in restoration work.

56.

Open Tray

TitaniumClosed tray impression coping length 6.80mm

TitaniumClosed tray impression coping length 6.80mm

PlasticImpression coping plastic cap - 5 pack length 7.50mm

PlasticImpression coping plastic cap - 5 pack length 7.50mm

TitaniumDirect Prosthetic screw length 7.60mm, 30Ncm

TitaniumDirect Prosthetic screw length 7.60mm, 30Ncm

Closed Tray

MaterialDimensions

Stainless steellength 13mm


Titaniumlength 21.30mm

Direct Impression copingMD-I0375

Impression coping for open tray internal hex. Wide platform

MW-I0470

Direct Impression coping guide pinMD-G0213

Impression Coping.

Transfer analogs

Direct Impression Coping Set for Closed Tray int .hex (MD-IT200)

Direct Impression Coping Set for Closed Tray int .hex .Wide platform (MW-IT200)

Note: MD-G0213 is included with MD-I0375 and MW-I0470.


Stainless steel

Titanium

length 11mm

length 16.5mm

Direct impression coping for closed trayMD-IT100

Direct Impression coping for closed tray internal hex. Wide platform

Direct impression coping guide pin internal hex

MW-IT100

MD-GP100





Press fit

Analogs

UNO

Aluminium

Plastic

length 18mm

length 12.40mm

MaterialDimensions

Press fit impression copingMD-PF375

Direct press fit for closed tray. Wide platformMW-PF550

Implant analogMD-RSM10

Wide diameter implant analogMW-RSM10

UNO one piece analogMO1-RSA10

Uno One Piece implant comfort plastic capMM-OUP01

58.Complete Prosthetic Set

CPS.

The Complete Prosthetic Set has been designed to enable an easy impression and transfer technique. It combines solutions for both bridges and single crowns and enables a simple restorative

process without necessary adjustments, nor additional elements. The Complete Prosthetic Set ensures an accurate fit for the impression coping.

Standard platform

Wide platform

MK-WCPS1MK-WCPS2MK-WCPS3MK-WCPS4

MK-CPS01MK-CPS02MK-CPS03MK-CPS04

height 1mmheight 2mmheight 3mmheight 4mm

height 1mmheight 2mmheight 3mmheight 4mm

59.

h

Ø

h

Ø

Standard platform

Wide platform

Stainless steel

Standard abutment analog

MD-RSM48

Titanium

Anatomic cementing transgingival abutment

MD-CPS01

Plastic

Impression coping plastic cap

Plastic

Plastic healing cap

Burn out plastic

Burn out anti-rotation plastic cap

Burn out plastic

Burn out plastic cap

Titanium

Direct prosthetic screw

Titanium


MD-CPS02

Titanium


MD-CPS03

Titanium


MD-CPS04

Material:

Material:

Dimensions:

Titanium Titanium Titanium Titanium Stainless steel

Wide anatomic cementing transgingival abutment




Wide abutment analog

Material:Dimensions:

Plastic Plastic Plastic Burn out plastic Titanium


Wide plastic healing cap

Wide burn out anti-rotation plastic cap

Wide Burn out plastic cap


Material:

MM-MTP53 MM-CHC55 MM-APC49 MM-CPC49 MD-S0220

MW-CPS01 MW-CPS02 MW-CPS03 MW-CPS04 MW-RSM48

MM-MTP53 MW-CHC55 MW-APC49 MW-CPC49 MD-S0220

Height 1mm, Ø4.8 Height 2mm, Ø4.8 Height 3mm, Ø4.8 Height 4mm, Ø4.8

Height 1mm, Ø5.5 Height 2mm, Ø5.5 Height 3mm, Ø5.5 Height 4mm, Ø5.5

60.

4

1

23

5

MK-RADT1RA Technical Kit.

Reverse Abutment Kits

The drilling fixture is a mechanical device for creating the housing of the abutment screw once the PCE and the ICE are definitively connected.

The Drilling Fixture

RA Technical Kit

The fixture is made up of four components:

1. The ”body,” (4) with a Ø2.3 mm hole on top; on the bottom, an aperture allowing the positioning of the footer; and on the lateral side a screw to be activated by an “elen”. 2. The footer is for maintaining the model of the RA; it has a Ø1.8 mm diameter hole at its base (1,2).3. The footer screw (5).4. A stopper used with the acryl ICE (3).

The Reverse Abutment technical kit facilitates the accurate drilling of a screw canal through the completed RA Prior to its casting.

1

2

3

4

5

61.

Stainless Steel

length 55mm

length 40mm

MaterialDimensions

MK-RADT1

Additional components

RA Technician kit

Tools

Drill Ø 1.80mm MT-RAD18

Drill Ø 2.30mmMT-RAD23

Stainless Steellength 40mmMT-RAPP2 Reverse Abutment Parallel Pin

Stainless Steellength 57.7mmAllen key 2mmMT-AL002

Locking fixture nut

Drilling guide

Stopper

Body

Footer screw

MT-RAD10

Stainless Steel

R.AI.C.E

I.EP.C.E

Reverse abutmentImplant connection element

Intermediary elementProsthesis connection element

Acronyms:

62.Gold Base Kit.

GBK.

Standard platform

Wide for standard platform

The Gold Base Kit is conveniently designed to house all the necessary components needed for the fabrication of an RA with a gold I.C.E and for its simple impression transfer.

MK-RAGS1

MK-RAGW1

63.

Standard platform



Gold

Gold

Gold implant Connection element

Gold implant Connection element

Plastic


Plastic

Standard plastic healing cap.

Burn out plastic

Burn out plastic

Burn out plastic

Burn out plastic

Burn out anti rotation standard plastic cap.

Burn out anti rotation wide plastic cap

Burn out plastic

Burn out plastic

Burn out standard plastic cap.

Burn out wide plastic cap

Connector pin

Connector pin

Titanium

Titanium

Plastic

Plastic

Direct prosthetic Screw Internal hex.

Direct prosthetic Screw Internal hex.

Prosthetic connection element-standard

Prosthetic connection element-wide

Material:

Material:

Stainless steel

Material:

Plastic Plastic



Material:


MD-RSM48MD-RAG01 MD-RAI01MD-S0220 MM-RAPE1

MM-MTP53 MM-CHC55 MM-APC49 MM-CPC49

MD-RAG01 MD-RAI01MD-S0220 MW-RAPE1 MW-RSM48

MW-APC49 MW-CPC49MM-MTP53 MW-CHC55

Stainless steel

64.Plastic Base Kit

PBK.

Standard platform


The plastic base kit is conveniently designed to house all the necessary components needed for the fabrication of an RA with a plastic I.C.E and for its simple impression transfer.

MK-RAPS1

MK-RAPW1

65.

Standard platform

Stainless steel

Stainless steel


Direct plastic cylinder with hex.

Plastic


Plastic

PlasticPlastic

Plastic

Standard plastic healing cap.

Burn out plastic

Burn out anti rotation standard plastic cap.

Burn out plastic

Burn out standard plastic cap.

MM-CPC49

Connector pin

Connector pin

Material:

Material:

Material:

Plastic


Plastic


Material:


Burn out plastic

Burn out anti rotation wide plastic cap

Burn out plastic

Burn out wide plastic cap

Titanium Titanium

Titanium

Direct plastic cylinder with hex.

MD-RSM48MD-CPH13 MD-RAI01

MM-MTP53 MM-CHC55 MM-APC49

MD-RAI01 MW-RSM48MD-CPH13

MM-MTP53 MW-CHC55 MW-APC49 MW-CPC49



MD-S0220

MD-S0220

66.

Prosthetic Options

MH-03375MH-04375MH-05375MH-06375

MD-RSM10

MD-I0375

Sta

ndar

d

Sin

gle

toot

h /

Cro

wn

Ana

tom

ic

Brid

ge/B

ar

Direct Temporary Plastic Cylinder

Plastic Cylinder

Gold-Plastic Cylinder

Temporary Titanium Cylinder

AnalogsHealing Caps

ImpressionCoping

MD-TPH50 MD-TCH13 MD-CPH13 MD-GPC10

MD-CPH50

MD-GP010MD-CP013

MD-CP050

MD-RSM10

MD-IT100

MM-MTP53

MD-IT200

MH-53375MH-54375MH-55375MH-56375

reconstruction tablestandard platform

Direct System.

Item descriptions on page 68

67.

3mm4.3mm

1mm2.31mm

2.4mm1.5mm

1.6mm 2.4mm

1mm2mm

1mm 2mm

3mm 4mm

3mm4mm

Prosthetic Options

Esthetic abutment


Sta

ndar

d

Sin

gle

toot

h /

Cro

wn

Ana

tom

ic

Brid

ge/B

ar

Complete ProstheticAbutment

Cementing Post Angulated Abutment

AnalogsHealingCaps

ImpressionCoping

Cemented reconstruction table

standard platform

Direct System.

*MH-03375MH-04375MH-05375MH-06375

MD-I0375

MD-RSM10

MD-RSM10MD-IT200

MM-MTP53

MD-IT100MH-53375MH-54375MH-55375MH-56375

MD-CPS01MD-CPS02MD-CPS03MD-CPS04

MD-TAD10MD-TAD20MD-TAD30MD-TAD40

MM-APC49(Anti rotation)

MM-CPC49

ED-CPH80

ED-CP080

MD-A0010

Zircon abutment

MD-CR010

Standard abutment

MD-CTP10

MD-WMAC1MD-MAC10

MD-MACF1

MD-P0030

MD-AN251

MD-P1530

MD-P2530

MD-A1510

MD-A2510

MD-AN151

68.

L

reconstructionDirect System.

MaterialDimensions

Titaniumlength 11mm

Burn-out plasticlength 11mm




Plasticlength 12mm

Burn-out plastic + gold - a

length 16.20mm


length 18.20mm

Titaniumlength 6.90mm30 Ncm


Gold-slength 7.70mm20 Ncm

Titaniumlength 12mm30 Ncm


Note: all superstructure prices include the MD-S0220 prosthetic screw.

Temporary titanium cylinder with hex. MD-TCH13

Direct plastic cylinder single tooth/crown with internal hexagon

MD-CPH13

Direct plastic cylinder bridge/bar without internal hexagon

MD-CP013

Wide Profile Direct Plastic cylinder without hexagon

MD-CP050

Wide Profile Direct Plastic cylinder with hexagon

MD-CPH50

Direct temporary plastic cylinder internal hexagon

MD-TPH50

Direct gold - plastic abutment cylinder with hexagon

MD-GPC10

Direct gold-plastic cylinder without hexagon

MD-GP010

Mini prosthetic screwMD-S0200

Direct prosthetic screwMD-S0220

Direct gold prosthetic screwMD-G0220

Medium prosthetic screwMD-S0222

Long prosthetic screwMD-S0224

69.

h

L

Cemented reconstructionDirect System.

MaterialDimensions

Direct System- Cemented reconstruction

Titaniumheight 1mmheight 2mmheight 3mmheight 4mm

Direct cementing transgingival postMD-TAD10MD-TAD20MD-TAD30MD-TAD40

Burn-out plasticlength 8mmED-CPH80

Burn-out plasticlength 8mmED-CP080

Titaniumlength 11mmEsthetic abutmentMD-A0010

Titaniumlength 13mmEsthetic abutmentMD-P0030

Zirconlength 11mmStandard platform Zircon abutmentMD-CR010

Titaniumlength 10.5mmNarrow cementing postMD-CTP10

Titaniumlength 11.5mmStandard cementing postMD-MAC10

Titaniumlength 11.5mmMD-WMAC1

Titaniumlength 11mm15° Angulated abutmentMD-AN151

Titaniumlength 10.5mm25° Angulated abutmentMD-AN251

Titaniumlength 11.1mm15° Esthetic angulated abutmentMD-A1510

Titaniumlength 11.1mm25° Esthetic angulated abutmentMD-A2510

Titaniumlength 13.1mm15° Angulated abutmentMD-P1530

Titaniumlength 13.1mm25° Esthetic angulated abutmentMD-P2530

Titaniumlength 6.90/7.60mm30 Ncm

Mini prosthetic screwDirect prosthetic screw

MD-S0200MD-S0220



Titaniumlength 12/14mm30 Ncm

Medium prosthetic screwLong prosthetic screw

MD-S0222MD-S0224

Titaniumlength 13mmFriction fit cementing post platform switching, SPMD-MACF1

Direct cementing post plastic cap with hex

Direct cementing post plastic cap without hex

Patent Pending

Wide cementing post for standard platform

Note: all superstructure prices include the MD-S0220 prosthetic screw.

70.

h

3.2mm2.6mm

1mm1mm

Multi-Unit keyMT-MUK02

Multi-Unit healing cap

MH-00450

Height 3mm

Stainless steel Stainless steellength 22mm


Gold

Multi-Unit bar gold coping

MM-BGC45

Height 3.2mm

Multi-Unit direct prosthetic titanium screw

MM-S0330

Gold 20Ncm

Multi-Unit direct prosthetic gold screw

MM-G0330

length 3.7mm

Material:

Material:

Material:

Material:

Dimensions:

Dimensions:

Dimensions:

Dimensions:

Screw retained reconstruction

Multi Unit System.

Material:Dimensions:

Burn out plastic + gold -a

Multi-Unit direct goldMM-MG450

length 15mmBurn out plastic

Multi-Unit direct plastic cylinder

MM-CP045

length 10mmStainless steel

Multi-Unit abutment analog

MA-RSM10

length 12mm

Multi-Unit impression coping for closed tray

MM-IT450

length 11.7mm

Multi-Unit Ti temporary cylinder

Multi-Unit impression coping for open tray

MM-T0450

MM-I0450

length 10mm

Titanium 30-35Ncm

Titanium 30-35Ncm

Titanium 15 Ncm Titanium 25Ncm

Multi-Unit abutment

Height 1mm

MA-S1375

Titanium 30-35Ncm

Multi-Unit abutment

Height 2mm

MA-S2375

Titanium 30-35Ncm

Multi-Unit abutment

Height 3mm

MA-S3375

Titanium 30-35Ncm

Multi-Unit abutment

Height 4mm

MA-S4375

Wide platform. Multi-Unit abutment

Height 1mm

MA-W1500

Titanium 30-35Ncm


Height 2mm

MA-W2500

Titanium 30-35Ncm


Height 3mm

MA-W3500

Titanium 30-35Ncm


Height 4mm

MA-W4500

Titanium

Multi-Unit 17 deg. angulated abutment with hex.

MA-ANH17

Titanium

MA-ANH30Multi-Unit 30 deg. angulated abutment with hex.

*

Patent Pending

length 3.7mm

Recommended tightening moment

* *

71.Reconstruction system

Bars.

Titanium

Gold - e Burn-out plastic

Plastic bar ovoid

Gold - e

Plastic bar ovoid

Gold - e

Titanium rider

Gold rider Plastic bar round

Plastic bar

Gold bar

Gold bar

Gold riderMM-TRU10

MM-TC100 MM-PC100

MM-PBU10

MM-GB100

MM-GBU10

MM-GRU10

height 2.6mmlength 50mm

height 2.5mmlength 3.5mm

Ø1.9mmlength 85mm


Ø1.9mmlength 50mm



Material:

Material:

Material:

Material:

Dimensions:

Dimensions:

Dimensions:

Dimensions:

Ovoid-shaped bar

Round bar

72.

h

SystemBall Attachment.

MaterialDimensions

Plasticheight 2.6mm

PlasticØ15mm

Titaniumheight 1mmheight 2mmheight 3mmheight 4mmheight 5mm

Ball attachment anchorMB-N1375MB-N2375MB-N3375MB-N4375MB-N5375

Titaniumheight 1mmheight 3mmheight 5mm

Wide platform ball attachment anchorMW-B1500MW-B3500MW-B5500

Stainless steellength 22mmBall attachment anchor keyMT-BK235

Plasticheight 3.5mmPlastic ball capMB-SF200

Gold - eheight 2.4mmGold ball capMB-GPS10

Stainless steelheight 3.2mmX 2

X 2

X 2

Stainless steellength 15.1mmBall attachment analogMB-RS375

Titaniumheight 10mmBall anchor 15 deg. Angulated abutmentMB-AN152

Titaniumheight 10mmBall anchor 25 deg. Angulated abutmentMB-AN252

UNO Narrow

Angulated Ball AttachmentPatent Pending

TitaniumUno Ball anchor screw 0.5mm MB-NR005

TitaniumUno Ball anchor screw 1.5mmMB-NR015

TitaniumUno Ball anchor screw 2.5mm MB-NR025

height 0.5mm

height 1.5mm

height 2.5mm

Plasticheight 2.6mmStandard plastic cap for metal housing

Optional capMB-PPC10

Soft plastic cap for metal housing

Plastic disc for ball attachment

Gold ball capMB-DMH10

MB-DB235

MB-PPR10

MB-MH100

73.

Plastic disc for ball attachmentMB-DMH10

MaterialDimensions

Titaniumheight 3.1mm

Plasticheight 2mm

Stainless steelheight 60mm

steelØ2.5mm

steelØ2.6mm

Titanium ball capMB-TTP10

Plastic mounting sleeveMB-PR010

Screw driver for titanium ball capMT-TSD10

Titanium ball cap spring standardMB-TBS10

Titanium ball cap spring softMB-TBS20

74.

h

h

x2

System

Locator Attachments.

Titanium nitrite coating

Locator Abutment MB-SZL00

height 0mm


height 1.80mmsteelsteel / Titanium nitrite coating


Titanium nitrite coating Titanium nitrite coating Titanium nitrite coating

Titanium nitrite coating Titanium nitrite coating

Titanium nitrite coating Titanium nitrite coating Titanium nitrite coating

Wide Locator Abutment

Locator Core Tool Locator Male Processing Pack-age - Pack of 2

Wide Locator Abutment Wide Locator Abutment Wide Locator Abutment

Wide Locator Abutment Wide Locator Abutment Wide Locator AbutmentMB-WZL00

MM-LCT10 MM-LMP02

MB-WZL04 MB-WZL05 MB-WZL06

MB-WZL01 MB-WZL02 MB-WZL03

height 0mm

height 4mm height 5mm height 6mm


Locator Abutment Locator Abutment Locator Abutment MB-SZL04 MB-SZL05 MB-SZL06




height 1mmTitanium nitrite coating


height 2mmTitanium nitrite coating


height 3mmMaterial:

Material:

Material:

Material:

Material:

Dimensions:

Dimensions:

Dimensions:

Dimensions:

Dimensions:

*Note: Locators should be ordered based on gingival height.

75.

Aluminum polyethylene

Locator Impression Coping - Pack of 4

MM-LIC10

length 4.50mm

Aluminum

Locator Female Analog - 4mm diam. - Pack of 4

MM-LFA40


Aluminum

Locator Female Analog - 5mm diam. - Pack of 4

MM-LFA50

Ø5mmlength 10.40mm

Nylon

Locator Replacement Male clear - Pack of 40°-10°*, 5 lbs**, 2.27 kg

MM-LRM10


Material:

Dimensions:

Nylon Pink

Locator Light Retention - Pack of 40°-10°*, 3 lbs**, 1.36 kg

MM-LLR10


Nylon Blue

Locator Extra Light Retention - Pack of 40°-10°*, 1.5 lbs**, 0.68 kg

MM-LEL10


Nylon Green

Locator Extended Range - Pack of 410°-20°*, 3-4 lbs**, 1.36-1.82 kg

MM-LER10


Material:

Dimensions:

Nylon Red Polyethylene Black Polyethylene Black

Locator Extra Light Extended - Pack of 410°-20°*, 1.5 lbs**, 0.68 kg

Locator Parallel Post - Pack of 4

Locator Black Processing - Pack of 4

MM-LELE1 MM-LPP10 MM-LBP10


Ø4.6mmlength 15mm

Ø4.6mmlength 1.80mm Material:

Dimensions:


Locator Square Drive Torque Wrench Driver

Locator Square Drive Torque Wrench Driver

* = For the correction of the Axes divergences for one implant** = Retentions strength

MM-LSD15 MM-LSD21

length 15mm length 21mm

Material:

Dimensions:

76.

Prosthetic Options

MH-W3500MH-W4500MH-W5500

MW-RSM10

MW-RSM10

MW-I0470 MW-TPH50 MW-CPH13

MW-CPH60

MW-GPC10

MW-GP010MW-CP013

MW-CP060

MW-IT100

MM-MTP53

MW-IT200

MH-W3630MH-W4630MH-W5630

Sta

ndar

d

Sin

gle

toot

h /

Cro

wn

Ana

tom

ic

Brid

ge/B

ar

Direct Temporary Plastic Cylinder

Plastic Cylinder Gold-Plastic Cylinder

Analogs

Analogs Plastic Cylinder

Healing Caps

Healing Caps

ImpressionCoping

Prosthetic Abutment


Wide Diameter- Screw retained reconstruction tableWide Platform.

77.cemented table

Wide Platform.

Prosthetic Options

Sta

ndar

d

Sin

gle

toot

h /

Cro

wn

Complete Prosthetic Abutment

Cementing Post Angulated Abutment

AnalogsHealing Caps

ImpressionCoping

MH-W3500MH-W4500MH-W5500

MW-CTP10

MW-MAC10

MW-AN151

MW-P0010

MW-P1510MW-WMAC1

MW-RSM10

MW-I0470 *MW-CPS01MW-CPS02MW-CPS03MW-CPS04

MW-APC49(Anti rotation)

*MW-CPC49

MW-TAD10MW-TAD20MW-TAD30MW-TAD40

Item descriptions on page 79*Note: The CPS includes these items

Ana

tom

ic

Brid

ge/B

ar

EW-CPH80

EW-CP080

MW-RSM10

MW-IT100

MM-MTP53

MW-IT200

MH-W3630MH-W4630MH-W5630

*

*

78.reconstruction table

Wide Platform Direct system.

MaterialDimensions

Burn-out plasticlength 13mmDirect plastic cylinder single tooth/crown with internal hexagon

MW-CPH13

Burn-out plasticlength 13mmDirect plastic cylinder bridge/bar without internal hexagon

MW-CP013

Plasticlength 14mmDirect temporary plastic cylinder internal hexagon

MW-TPH50

Plastic

Plastic

length 13mmØ6mm

length 13mmØ6mm

Direct plastic cylinder with hex. WP

Direct plastic cylinder without hex. WP

MW-CPH60

MW-CP060


length 18.20mmDirect gold - plastic abutment cylinder with hexagon

MW-GPC10


length 18.20mmDirect gold-plastic cylinder without hexagon

MW-GP010











Note: all superstructure prices include the relevant screw.

79.

h

Cementedreconstruction table

Wide Platform Direct system.

MaterialDimensions






Titaniumlength 11mm

Titaniumlength 11mm

Titaniumlength 11mm

Titanium

Titanium

length 11.50mm

length 13mmØ6mm

Titaniumlength 10.50mm



Titaniumheight 1mmheight 2mmheight 3mmheight 4mm






15° Wide Esthetic angulated abutmentMW-P1510

Wide Esthetic abutmentMW-P0010

15° Wide diameter angulated abutmentMW-AN151

Wide cementing postMW-MAC10

Wide narrow cemented postMW-CTP10

Wide burn out plastic capEW-CP080

Wide burn out anti-rotation plastic capEW-CPH80


MW-TAD10MW-TAD20MW-TAD30MW-TAD40

Wide platform cementing post MW-WMAC1

Note: all superstructure prices include the relevant screw.

80.

Accessories.

MIS offers technicians a range of innovative tools

that ease and simplify lab work, and help reach

higher accuracy in every case.

81.MK-DB01

Zircon Diamond Burr Set.

The Zircon Diamond Burr Set has been designed to enable easy grinding and

preparation of zircon abutments.

Diamond burr 2.10mmMT-F2121

Diamond burr 2.50mmMT-C3125

Diamond burr 1.80mmMT-B4018

Diamond burr 2.30mmMT-K2023

Diamond burr 2.20mm

Zircon Diamond Burr Set

MT-A4022

Kit Contents

82.

L

Prosthetic Instruments.

Stainless steel


Stainless steelanodized aluminum


Stainless steel

Technical hex. screwdriver

Ball attachment anchor key

Screw driver for titanium ball cap

Short hand screwdriver for 0.05" hex

Long hex. driver 0.05”

Int. connection abutment extractor

MT-HHR13

MT-HTS10 MT-BK235

MT-TSD10

MT-HDS30 MT-HDL30

MT-IE172

length 29mm

length 142.5mm length 22mm

length 50mm

length 16mm length 22mm

length 27mm

Stainless steel

Closed tray impression coping keyMT-IT100

length 16.5mm

Material:

Material:

Dimensions:

Dimensions:

Stainless steel

Allen key 0.05”MT-AL005

length 72mmMaterial:

Dimensions:

Stainless steel

Gingival depth measuring 2/4//6/8 mm

MT-GDM01

Stainless steel

Short motor key adapter 0.05” MT-SMK13


Long motor key adapter 0.05”MT-LMK13

length 30mmMaterial:

Dimensions:

MT-HHR07


Short screwdriver for 0.05" hex

Long hand screwdriver for 0.05" hex

83.MK-0001

Abutment Holding

System Kit.

Prosthetic Holder

This prosthetic holder provides an easy way to shape and grind ceramic and titanium abutments without damaging surrounding structures.

84.BS-4BS01

MIS 4BONE is a fully synthetic bone substitute made of fully synthesized HA & βTCP, (60% / 40% ratio) an interconnected micro and 70% macroporosity promotes the invasion of osteogenic cells by osteoconduction and allows biological fluid diffusion. The 4BONE contains optimized morphology and resorption properties that achieve predictable treatment outcomes. The unique packaging (syringe) has excellent wetting properties, that allows a simple approach to handling the product. The 4BONE offers the practitioner flexibility in a large range of oral regeneration procedures.

Background100% bone substitution. boasts the greatest clinical and fundamental literature review of 20 years of human and animal use of micro and macroporous biphasic calcium phosphate materials (4BONE ).

Architectural bone remodelingSpecific microstructure and macro structure represent a dynamic process, including physico-chemical processes, crystal/protein interactions, cell and tissue colonization and bone remodelling.

EasyEasy to handle. The granules of the 4BONE bone replacement substance easily absorb the patient’s blood or physiological solution in the syringe, which is then used to easily apply the substance to the implant site.

Safety100% Synthetic. No human or animal origin. 20 years of clinical studies have demonstrated efficiency, biocompatibility and safety of 4BONE bioceramic.

EfficiencyBioactive. 4BONE allows cell attachment, proliferation and cell invasion.

4BONE

85.

Packaging & Indications.the unique packaging of 4BONE in a syringe, offers the clinician an easy procedure of mixing the substance with the patient’s blood and/or saline water. After the blood and/or saline water is fully absorbed in the 4BONE , placing the substance in the patient’s mouth is simple to perform with the syringe.

MIS 4BONE is indicated for filling and\or augmenting intra oral\maxillofacial os-seous defects. The indications for using MIS 4BONE include bony dehiscences and fenestrations around dental implants. 4BONE is also very efficient in immediate implanting.

Facilitates architectural bone formation by providing an osteoconductive scaffolding. with a homogenous phase distribution that controls excessive resorption. 4BONE serves as a scaffold for bone deposition during the bone formation process. The mechanical stability of the augmentated volume is maintained as a result of the slow resorption rate of hydroxyapatite which prevents excessive resorption. Unlike other biphasic calcium phosphates, 4BONE is not only a mixture of HA and TCP, but is chemically synthesized as a composite, in order to ensure homogenous distribution of the two phases.4BONE is integrated during the natural remodelling process of the human bone, and is replaced by natural bony crystals similar to human bone.Effective bone regeneration, safety, and biocompatibility that have been clinically and scientifically proven for over 20 years in all areas of surgery.4BONE benefits from the largest scientific and clinical literature on the market since 1986 (500 publications).4BONE SBS is used for new therapeutic processes based on tissue engineering procedures (bone reconstruction in ir-radiated sites).

Easy procedure for mixing 4BONE with the patient ’s blood and/or saline water.

One functionBone resorption/substitution.

The 4BONE coms in an easy to use syringe:

Quantity: 0.5cc, 0.37grGranules’ size: 0.5-1.00 mm.

Easy procedure for mixing 4BONE with the patient ’s blood and/or saline water.

86.BS-4BS10, BS-4BS20

4BONE is a non structural bioactive bone graft substitute, which is resorbable and able

to be rapidly replaced by newly-formed bone. The 4BONE is a ceramic constituted

of two-phase of calcium phosphate 60 % hydroxyapatite and 40 % beta tricalcium

phosphate. The hydroxyapatite (HA) - Ca10(PO4)6(OH)2 is chemically comparable to

biological apatite crystals. Both in vitro and in vivo, chemically pure hydroxyapatite

is considered as the least bioactive of calcium phosphate ceramics. Beta tricalcium

phosphate (beta TCP) – Ca3(PO4)2 is recognized to have greater bioactivity, greater

extend of dissolution than HA in vitro and in vivo.

1cc/2cc.

The 4BONE SBS comes in two tubes quantities:BS-SBS10 - 1cc (0.6gr) granules size: 1-2mmBS-SBS20 - 2cc (1.2gr) granules size: 1-2mm

87.

Resorbable collagen membrane 4BONE-RCM is from highly purified collagen fibres type I and III derived from skin of porcine origin. 4BONE-RCM membrane is obtained by collagen cross linking using formaldehyde technology, and neutralized after. 4BONE-RCM membrane is fully resorbable eliminating the need for the second surgical procedure often required to remove a non resorbable membrane. Collagen is currently used for general and dental surgery as an absorbable haemostatic agent and absorbable wound dressing. A control process of collagen cross-linking provides 4BONE RCM Membrane its ability to function as a 4-6 month barrier.

BR-C1525, BR-C2030RCM

4BONE-RCM (Resorbable Collagen Membrane) Comes in two sizes: BR-C1525 - 15x25, BR-C2030 - 20x30

4BONE- Membrane

88.

MWH-M0131 (230V)

MWH-M0132 (115V)

The surgical micromotor has advanced functions for implantology, such as: programs, working steps and low speed with high torque.

Exclusive design, highly practicable and easily portable.

MIS-MCU Control Unit.

89.

Peformance is in line with all the most modern clinical developments in the dentistry field.

Accessories.

MWH-MMOTRMicromotor and cord kit

MWH-M7559Surgical contra-angle 20:1

MWH-1STUBOne way sterile tubes

Outstanding simplicity. All functions have a single key operation and are shown on a clearly visible display panel.

The Motor already offers familiar features: for example thetorque limitation for dental implantations (5-50 Ncm).And the wide speed range of 300-40,000 rpm.And a maintenance-free motor.And the integrated coolant pump.And of course with the implantmed you have a productthat not only meets but exceeds all quality requirements.

* Irrigation tubing is single use only and must be replaced after each use.

. Control Unit (Console)

. Foot Pedal Control

. Irrigation Support Rod

. Rubber Motor Support

. 3 Sterile Irrigation Tubes

. Power Cord (cord length 2m)

. MUC-MIS Control Unit User Manual

. Micromotor and cord kit

The MIS MCU core kit comes with:

Touch button surgical micromotor with a physiodispenser, electronic speed and torque control.

Complies with the most stringent safety requirements for medical equipment. The MIS-MCU is approved by the CE, FDA and manufactured under ISO 9001:2000 regulations.

90.The Crown Set.

With the Crown Set, you’ll immediately notice the ease of seating. The cement extrudes easily around the crown margins and within 90 seconds reaches the first stage of cure. With a coherent rubbery consistency during the first cure stage, removal of the material from the interproximal areas, sulcular tissues and undercuts, is quick and easy. As the material continues to cure,

it achieves a rigid set that easily retains the crown, yet can be simply removed if required. Crown set advanced resin chemistry; 2-stage setting and easy auto mix dispensing system make it ideal for cementing implant-retained crowns. The Crown Set can be auto mixed from a convenient 5 ml hand syringe.

Technical Specifications: Setting time Initial 90-120S Final 240-300SCompressive strength 35 MPa Flexural strength 28.1 MPa Flexural modulus 1500 Mpa

Film thickness 15 micron Water sorption <0.8 mg/cm3Water solubility <0.04 mg/cm3Linear shrinkage 2.5%

The Crown Set contains:1 Mixing padAutomix syringe 5ml10 Mixing tips

MK-0022

91. Material Compositions.

Application C, K L, G, K L, G, K L, K

Gold-eMaterial Ti-6AL-4V Gold-a Gold-s

Composition

Hardness

Legend: C–to bond K–resin L–soldering G–casting onto

Au %

Pt %

Ag %

Pd %

Cu %

Zn %

Ir %

Ti

C (max)

Fe (max)

O (max)

N (max)

H (max)

Al

V

Melting range C°

Soft annealing HV5

Hardened HV5

Soft C° / min

Hardened C° / min

-

-

-

-

-

-

-

Balanced

0.8

0.25

0.13

0.05

0.012

5.6-6.5

3.5-4.5

1604-1660

-

350-385

-

-

60

19

-

20

-

-

Balanced

-

-

-

-

-

-

-

-

1400-1490

145

240

100/30

700/30

61

12

16

-

9

Balanced

-

-

-

-

-

-

-

-

-

900-930

160

250

750/5

350/15

70

8.50

13.40

-

7.50

0.05

0.10

-

-

-

-

-

-

-

-

895-1010

170

295

750/5

450/15

92.

Index.

The index is arranged alphabetically

and in numeric order

93. Index.Alphabetic Order

Abutments


Anatomic cementing transgingival abutment wide dia

Angulated int. hex. Angulated int. hex. Angulated int. hex wide dia. EstheticEsthetic abutment Esthetic angulated Esthetic angulated Esthetic angulated Esthetic angulatedFriction fit cementing post switch platform, sp Multi-unit abutment

Multi-unit abutment wide dia.

Multi unit angulated abutment with hex.Multi unit angulated abutment with hex.Narrow cementing post Narrow cementing post wide dia. Standard cementing post int. hex Standard platform Zircon abutment Transgingival post

wide cementing post for standard diawide dia cementing post int. hex Wide esthetic Wide esthetic angulated Wide Transgingival post

676767677777777767/6967/6977/7967/6967/6967/6967/6967/6967/6967/697070707070707070707067/6977/7967/6967/6967/6967/6967/6967/6967/6977/7977/7977/7977/7977/7977/7977/79

1mm2mm3mm4mm1mm2mm3mm4mm15º25º15º

15º25º15º25º13mm1mm2mm3mm4mm1mm2mm3mm4mm17º30º

1mm2mm3mm4mm

15º1mm2mm3mm4mm

MD-CPS01MD-CPS02MD-CPS03MD-CPS04MW-CPS01MW-CPS02MW-CPS03MW-CPS04MD-AN151MD-AN251MW-AN151MD-P0030MD-A0010MD-A1510MD-A2510MD-P1530MD-P2530MD-MACF1MA-S1375MA-S2375MA-S3375MA-S4375MA-W1500MA-W2500MA-W3500MA-W4500MA-ANH17MA-ANH30MD-CTP10MW-CTP10MD-MAC10MD-CR010MD-TAD10MD-TAD20MD-TAD30MD-TAD40MD-WMAC1MW-MAC10MW-P0010MW-P1510MW-TAD10MW-TAD20MW-TAD30MW-TAD40

Size Cat. No. Page

A

94.

Analogs

Abutment analog Abutment analog Wide diaBall attachment int. hex Implant analog int. hexWide dia. Implant analog int. hexUNO one piece analogMulti unit abutment analog Ball

Attachment int. hex

Attachment int. hex. wide dia

Ball anchor angulated abutment Ball anchor angulated abutment Cap gold Double metal housing Plastic ball cap Plastic mount sleeve Plastic pink Plastic soft disc Standard plastic cap for metal housing Titanium ball cap Titanium ball cap spring softזז Titanium ball cap spring standardGold ball capUno Ball anchor screw

Bar

Multi-unit bar gold coping Ovoid

Round

59597257/66/67575770/76-77

727272727272727272727272727372727273737372

727272

7071717171717171

1mm2mm3mm4mm5mm1mm3mm5mm15º25º

3.2mm

0.5mm0.15mm0.25mm

MD-RSM48MW-RSM48MB-RS375MD-RSM10MW-RSM10MO1-RSA10MA-RSM10

MB-N1375MB-N2375MB-N3375MB-N4375MB-N5375MW-B1500MW-B3500MW-B5500MB-AN152MB-AN252MB-GPS10MB-DMH10MB-SF200MB-PR010MB-PPR10MB-DB235MB-PPC10MB-TTP10MB-TBS20MB-TBS10MB-MH100

MB-NR005MB-NR015MB-NR025

MM-BGC45MM-GBU10MM-GRU10MM-PBU10MM-TRU10MM-GB100MM-PC100MM-TC100

Size Cat. No. Page

B

Index.Alphabetic Order

95.

Drills

Ceramic drills - marking Ceramic drills - pilot Ceramic drills - twist Countersink Countersink External irrigation marking External irrigation pilot External irrigation twist External irrigation twist External irrigation twist External irrigation twist External irrigation twist External irrigation twist External irrigation twist External irrigation twist Internal irrigation twist drill shortInternal irrigation twist drill longInternal irrigation twist drill longInternal irrigation twist drill longInternal irrigation twist drill long Internal irrigation twist drill shortInternal irrigation twist drill longInternal irrigation twist drill shortInternal irrigation twist drill shortInternal irrigation twist drill longInternal irrigation twist drill shortInternal irrigation twist drill longInternal irrigation twist drill shortMarkingPilot long Pilot short Spade marking drill

Healing Caps

Anatomic int. hex

Healing cap Healing cap wide dia Multi-unit Standard int. hex

313131282830303030303030303030282828282828282828282828282828282830

12/18/66/6712/18/66/6712/18/66/6712/18/66/6759597012/18/66/6712/18/66/67

2.10mm2mm2.80mm2.70/3.754.50mm1.9mm2mm2.80mm3mm3.20mm3.50mm3.80mm4.50mm5mm5.50mm2.80mm3.20mm3.80mm4.50mm2.80mm3mm3.20mm3.50mm3.80mm4.50mm5mm5mm5.50mm5.50mm1.90mm2mm2mm

MT-CRD21MT-CRD20MT-CRD28MT-GDN33MT-GDN50MT-TDN19MT-TDN20MT-TDN28MT-TDN30MT-TDN32MT-TDN35MT-TDN38MT-TDN50MT-TDN55MT-TDN45MT-TDS28MT-TD320MT-TD380MT-TD450MT-TD280MT-TD300MT-TDS32MT-TD350MT-TDS38MT-TDS45MT-TD500MT-TDS50MT-TD550MT-TDS55MT-TD110MT-TD200MT-TDS20MT-SMD10

MH-53375MH-54375MH-55375MH-56375MM-CHC55MW-CHC55MH-00450MH-03375MH-04375

Size Cat. No. Page

D

H


96.

Wide dia. anatomic

Wide dia. standard

Impression Coping

Impression coping plastic cap Direct impression coping Direct impression coping - wide diaDirect Impression coping for closed tray Direct Impression coping for closed tray - wide diaDirect Impression coping for closed tray Int. Hex Wide direct Impression coping for closed . tray Int. HexDirect impression coping guide pin internal hexGuide pin Multi unit impression coping for closed trayMulti unit impression coping for closed tray Press fit - wide dia

Implants

UNO One Piece Implant

Ø 3mm

Ø 3.50mm

UNO Narrow Implant

BioCom screw type int. hex Ø 3.30mm

Ø 3.75mm

12/18/66/6712/18/66/6712/18/76/7712/18/76/7712/18/76/7712/18/76/7712/18/76/7712/18/76/77

59/66/67/76/7756/66/6756/76/7756/66/6756/76/7756/66/6756/76/7756567070575757

8-98-98-98-98/108/108/108/108/118/118/118/11

12-1312-1312-1312-1312/1412/1412/14

10mm11.5mm13mm16mm10mm11.5mm13mm16mm10mm11.5mm13mm16mm

10mm11.5mm13mm16mm8mm10mm11.5mm

MH-05375MH-06375MH-W3630MH-W4630MH-W5630MH-W3500MH-W4500MH-W5500

MM-MTP53MD-I0375MW-I0470MD-IT200MW-IT200MD-IT100MW-IT100MD-GP100MD-G0213MM-IT450MM-I0450MD-PF375MW-PF550MM-OUP01

MO1-10300MO1-11300MO1-13300MO1-16300MO1-10350MO1-11350MO1-13350MO1-16350MO2-10300MO2-11300MO2-13300MO2-16300

MF4-10330MF4-11330MF4-13330MF4-16330MF4-08375MF4-10375MF4-11375

Size Cat. No. Page

I


97.

Ø 4.20mm

Ø5mm

Ø6mm

Seven screw type int. hex

Ø3.75mm

Ø4.20mm

Ø 5mm

Ø 6mm

Locator Attachments System

Wide Locator 3.75mm - 4.20mm int. hex

12/1412/1412/1512/1512/1512/1512/1512/1612/1612/1612/1612/1612/1712/1712/1712/17

18-1918-1918-1918-1918-1918/2018/2018/2018/2018/2018/2118/2118/2118/2118/2118/2218/2218/2218/22

747474747474

13mm16mm8mm10mm11.5mm13mm16mm8mm10mm11.5mm13mm16mm8mm10mm11.5mm13mm

8mm10mm11.5mm13mm16mm8mm10mm11.5mm13mm16mm8mm10mm11.5mm13mm16mm8mm10mm11.5mm13mm

0mm1mm2mm3mm4mm5mm

MF4-13375MF4-16375MF4-08420MF4-10420MF4-11420MF4-13420MF4-16420MF4-08500MF4-10500MF4-11500MF4-13500MF4-16500MF4-08600MF4-10600MF4-11600MF4-13600

MF7-08375MF7-10375MF7-11375MF7-13375MF7-16375MF7-08420MF7-10420MF7-11420MF7-13420MF7-16420MF7-08500MF7-10500MF7-11500MF7-13500MF7-16500MF7-08600MF7-10600MF7-11600MF7-13600

MB-WZL00MB-WZL01MB-WZL02MB-WZL03MB-WZL04MB-WZL05

Size Cat. No. Page

L


98.

Locator black processing Locator Core Tool Locator extended range Locator extra light extended Locator extra light retention Locator Female analog Locator Female analog Locator for 3.75mm -4.20mm int. hex

Locator Impression coping Locator Light retention Locator Male Processing Pack Locator parallel post Locator Replacement Locator Square Drive Torque Locator Square Drive Torque

Plastic Cap

Burn out Burn out anti-rotation Burn out anti-rotation Burn out - Wide dia Burn out plastic capBurn out plastic cap-wideBurn out anti-rotation plastic cap Burn out anti-rotation plastic cap-wide

Plastic Cylinder

Direct gold -plastic abutment cylinder with hexDirect gold -plastic abutment cylinder without hex Multi-unit direct gold Direct plastic cylinder. with hexDirect plastic cylinder. without hex Direct gold plastic cylinder without hexGold plastic cylinder wide dia. with hex Multi-unit direct plastic cylinder Plastic cylinder. With hexPlastic cylinder. without hex

74757475757575757474747474747475757475757575

59/6759/7759/6759/7767/697967/6979

66/6876/787066/6866/6866/6876/787076/7876/78

6mm

0mm1mm2mm3mm4mm5mm6mm

MB-WZL06MM-LBP10MM-LCT10MM-LER10MM-LELE1MM-LEL10MM-LFA40MM-LFA50MB-SZL00MB-SZL01MB-SZL02MB-SZL03MB-SZL04MB-SZL05MB-SZL06MM-LIC10MM-LLR10MM-LMP02MM-LPP10MM-LRM10MM-LSD15MM-LSD21

MM-CPC49MW-CPC49MM-APC49MW-APC49ED-CP080EW-CP080ED-CPH80EW-CPH80

MD-GPC10MW-GP010MM-MG450MD-CPH13MD-CP013MD-GP010MW-GPC10MM-CP045MW-CPH13MW-CP013

Size Cat. No. Page

P


99.

Direct plastic cylinder with hex. WPDirect plastic cylinder without hex. WP Wide profile direct Plastic cylinder with hexWide profile direct Plastic cylinder without hex Screws

Cover screw int. hex Cover screw int. hex. wide dia Direct prosthetic screw Direct gold prosthetic screw Long prosthetic screw Medium prosthetic screw Mini prosthetic screw Multi-unit direct prosthetic gold screw Multi-unit direct prosthetic titanium screw

Screwdriver

Allen key Ball attachment anchor key Closed tray impression coping keyGingival depth measuring Hand hex. Driver Hand hex. Driver Implant site depth probe Implant direct indicatorScrew drive for titanium ball cap Technical hexMulti unit key

Set

4Bone 4Bone 1cc4Bone 2cc 4Bone -RCM

Abrahami Drill Guide Kit Alveolar Ridge Expanding Osteotomes Bone Compression Kit Complete prosthetic set

Complete prosthetic set Wide dia

76/7876/7866/6866/68

12/1812/1868/69/78/7959/68/69/78/7968-69/78-7968-69/78-7968-69/78-797070

8272/8282828282353573/828270

84-858686878744-455346-4758-5958-5958-5958-5958-5958-59

4mm

0.05"

0.05"0.05"

MWCPH60MW-CP060MD-CPH50MD-CP050

MC1-00375MC1-00470MD-S0220MD-G0220MD-S0224MD-S0222MD-S0200MM-G0330MM-S0330

MT-AL005MT-BK235MT-IT100MT-GDM01MT-HHR13MT-HHR07MT-BTI10MT-DI001MT-TSD10MT-HTS10MT-MUK02

BS-4BS01BS-4BS10BS-4BS20BR-C1525BR-C2030MK-0011MK-0023MK-0020MK-CPS01MK-CPS02MK-CPS03MK-CPS04MK-WCPS1MK-WCPS2

Size Cat. No. Page

S


100.

Convex Osteotomes SetCrown set Crest Widener KitDrill Stopper Kits

Abutment Holder System Zircon diamond burr set MCU-MIS Control Unit Osteotomes Set RA Technical KitRA Gold Base Kit- standard platformRA Gold Base Kit- wide for standard platformRA Plastic Base Kit- standard platformRA Plastic Base Kit- wide for standard platformSurgical Instruments Kit Surgical Instruments Kit -External irrigation Surgical Instruments Kit - Internal irrigation The Basic Kit The Organizer Kit UNO Implant Surgical KitYeung Bone Harvest Kit

Temporary Cylinders

Direct titanium with hexMulti unit Titanium temporary cylinderPlastic with hexWide

Thread Forms

Thread Forms Short Thread Forms Long Thread Forms Short Thread Forms Long Thread Forms Short Thread Forms Long Thread Forms Short Thread Forms Long Thread Forms Short Thread Forms Long

58-5958-59519042-434040404040838188-895260-6162-6362-6364-6564-6538-3938-3938-39505048-4941

66/687066/6876/78

33333333333333333333

3.30mm3.30mm3.75mm3.75mm4.20mm4.20mm5mm5mm6mm6mm

MK-WCPS3MK-WCPS4MK-0024MK-0022MK-CW28MK-STO20MK-STO28MK-STO32MK-STO38MK-STO45MK-0001MK-DB01MWH-M0131/2MK-0002MK-RADT1MK-RAGS1MK-RAGW1MK-RAPS1MK-RAPW1MK-0035MK-EI35MK-IR35MK-0014MK-0012MK-0036MK-BH26

MD-TCH13MM-T0450MD-TPH50MW-TPH50

MT-TNS33MT-TNL33MT-TNS37MT-TNL37MT-TNS42MT-TNL42MT-TNS50MT-TNL50MT-TNS60MT-TNL60

Size Cat. No. Page

T


101.

Tools

Body Try

Drill extender Hammer solid plastic insert Hand wrench Hex.Drive long Hex.Drive shortHolding abutment mount key Hex. Ratchet long adapter for int. hex connectionHex. Ratchet short adapter for int. hex connectionHex. Hand key for int. hex connectionHolding mount key Motor key adapter 0.05" long Motor key adapter 0.05" short Parallel pin Ratchet Surgical adapter driver Short ratchet adapter for Narrow implantLong ratchet adapter for Narrow implantShort motor adapter for int. hex. ConnectionLong motor adapter for int. hex. ConnectionThread form adapter Uno one piece implant short keyUno one piece implant insertion toolUno one piece implant motor adapter, longUno one piece implant motor adapter, shortUno one piece implant long keyTissue punch Torque wrench Trephine Burrs

Hand key Trephine

3535353535353534353434/8234/823534343434/8234/8234353533333434353333333333353535

32323232

2mm2.80mm3.20mm3.80mm4.50mm5mm5.50mm

75mm

20mm30mm22mm

4mm5mm6mm

MT-BT020MT-BT028MT-BT032MT-BT038MT-BT045MT-BT050MT-BT055MT-DE001MT-MAL10MT-HW001MT-HDL30MT-HDS30CT-HCK01MT-MRH20MT-MRH10MT-HHK24MT-LMK13MT-SMK13MT-PP001MT-RI030MT-MSD20MT-HRS27MT-HRL27MT-MMH10MT-MMH20MT-TFA01MT-HKS15MT-HKL21MT-HKO21MT-UML21MT-UMS21MT-TP500MT-TP420MT-RI040

MT-HTR10MT-00400MT-00500MT-00600

Size Cat. No. Page


102.

BR-C1525

BR-C2030

BS-4BS01

BS-4BS10

BS-4BS20

CT-HCK01

ED-CP080

ED-CPH80

EW-CP080

EW-CPH80

MA-ANH17

MA-ANH30

MA-RSM10

MA-S1375

MA-W1500

MA-S2375

MA-W2500

MA-S3375

MA-W3500

MA-S4375

MA-W4500

MB-AN152

MB-AN252

MB-DB235

MB-DMH10

MB-GPS10

MB-MH100

MB-N1375

MB-N2375

MB-N3375

MB-N4375

MB-N5375

MB-NR005

MB-NR015

MB-NR025

MB-PPC10

MB-PPR10

MB-PR010

MB-RS375

MB-SF200

MB-SZL00

MB-SZL01

MB-SZL02

MB-SZL03

MB-SZL04

MB-SZL05

MB-SZL06

MB-TBS10

MB-TBS20

MB-TTP10

MB-WZL00

MB-WZL01

MB-WZL02

MB-WZL03

MB-WZL04

MB-WZL05

MB-WZL06

MC1-00375

MC1-00470

MD-A0010

MD-A1510

MD-A2510

MD-AN151

MD-AN251

MD-CP013

MD-CPH13

MD-CPH50

MD-CP050

MD-CPS01

MD-CPS02

MD-CPS03

MD-CPS04

MD-CR010

MD-CTP10

MD-G0213

MD-G0220

MD-GP010

MD-GP100

MD-GPC10

MD-GP010

MD-I0375

MD-IT100

MD-IT200

MD-MAC10

MD-MACF1

MD-P0030

MD-P1530

MD-P2530

MD-PF375

MD-RSM10

MD-RSM48

MD-S0200

MD-S0220

MD-S0222

MD-S0224

MD-TAD10

MD-TAD20

MD-TAD30

MD-TAD40

MD-TCH13

MD-TPH50

MD-WMAC1

MF4-08375

MF4-08420

MF4-08500

MF4-08600

MF4-10330

MF4-10375

MF4-10420

MF4-10500

MF4-10600

73

72

72

74

74

74

74

74

74

74

73

73

73

74

74

74

74

74

74

74

12-18

12-18

67-69

67-69

67-69

67-69

67-69

66-68

66-68

66-68

66-68

67

67

67

67

67-69

67-69

56

59/68-69/78-79

76-78

56

66-68

66-68

67

56/66-67

56/66-67

67-69

67/69

67/69

67/69

67/69

57

57/66/67

59

68-69/78-79

68-69/78-79

68-69/78-79

68-69/78-79

67/69

67/69

67/69

67/69

66/68

66/68

67/69

12/14

12/15

12/16

12/17

12-13

12/14

12/15

12/16

12/17

87

87

84-85

86

86

35

67/69

67/69

77/79

77/79

70

70

70/76-77

70

70

70

70

70

70

70

70

72

72

72

72

72

72

72

72

72

72

72

72

72

72

72

72

Index.Numeric Order

Cat. No. Cat. No. Cat. No.Page Page Page

103.

MF4-11330

MF4-11375

MF4-11420

MF4-11500

MF4-11600

MF4-13330

MF4-13375

MF4-13420

MF4-13500

MF4-13600

MF4-16330

MF4-16375

MF4-16420

MF4-16500

MF7-08375

MF7-08420

MF7-08500

MF7-08600

MF7-10375

MF7-10420

MF7-10500

MF7-10600

MF7-11375

MF7-11420

MF7-11500

MF7-11600

MF7-13375

MF7-13420

MF7-13500

MF7-13600

MF7-16375

MF7-16420

MF7-16500

MH-00450

MH-03375

MH-04375

MH-05375

MH-06375

MH-53375

MH-54375

MH-55375

MH-56375

MH-W3500

MH-W3630

MH-W4500

MH-W4630

MH-W5500

MH-W5630

MK-0001

MK-0002

MK-0011

MK-0012

MK-0014

MK-0020

MK-0022

MK-0023

MK-0024

MK-0035

MK-0036

MK-BH26

MK-CPS01

MK-CPS02

MK-CPS03

MK-CPS04

MK-CW28

MK-DB01

MK-EI35

MK-IR35

MK-RADT1

MK-RAGS1

MK-RAGW1

MK-RAPS1

MK-RAPW1

MK-ST020

MK-ST028

MK-ST032

MK-ST038

MK-ST045

MK-WCPS1

MK-WCPS2

MK-WCPS3

MK-WCPS4

MM-APC49

MM-BGC45

MM-CHC55

MM-CP045

MM-CPC49

MM-G0330

MM-GB100

MM-GBU10

MM-GRU10

MM-I0450

MM-IT450

MM-LBP10

MM-LCT10

MM-LEL10

MM-LELE1

MM-LER10

MM-LFA40

MM-LFA50

MM-LIC10

MM-LLR10

MM-LMP02

MM-LPP10

MM-LRM10

MM-LSD15

MM-LSD21

MM-MG450

MM-MTP53

MM-OUP01

MM-PBU10

40

40

40

40

58-59

58-59

58-59

58-59

59/67

70

59

70

59/67

70

71

71

71

70

70

75

74

75

75

75

75

75

75

75

74

75

75

75

75

70

59/66-67/76-77

57

71

12-13

12/14

12/15

12/16

12/17

12/13

12/14

12/15

12/16

12/17

12-13

12/14

12/15

12/16

18-19

18/20

18/21

18/22

18-19

18/20

18/21

18/22

18-19

18/20

18/21

18/22

18-19

18/20

18/21

18/22

18-19

18/20

18/21

70

12-18-66-67

12-18-66-67

12-18-66-67

12-18-66-67

12-18-66-67

12-18-66-67

12-18-66-67

12-18-66-67

12-18-76-77

12-18-76-77

12-18-76-77

12-18-76-77

12-18-76-77

12-18-76-77

83

52

44-45

50

50

46-47

90

53

51

38-39

48-49

41

58-59

58-59

58-59

58-59

42-43

81

38-39

38-39

60-61

62-63

62-63

64-65

64-65

40

Index.Numeric Order

Cat. No. Cat. No. Cat. No.Page Page Page

104.

71

70

70

71

71

8-9

8/10

8-9

8/10

8-9

8/10

8-9

8/10

57

8/11

8/11

8-11

8/11

32

32

32

82

72-82

35

35

35

35

35

35

35

35

31

31

31

34

35

82

28

28

34/82

34/82

34

82

82

33

33

33

33

33

32

82

34

82

34-82

35

34

34

34

34

35

70

34

35

35

30

34-82

28

28

28

28

28

28

28

28

28

28

30

30

30

30

30

30

30

30

30

30

28

28

28

28

28

28

28

35

33

33

33

33

33

33

33

33

33

33

35

35

73/82

33

33

77/79

59/77

72

72

72

59

76/78

76/78

59/77

76-78

76/78

77

77

77

77

77-79

76/78

76-78

88-89

56/76-77

56-76-77

56-76-77

56

77-79

77-79

77-79

57

57

59

77-79

77-79

77-79

77-79

76-78

77/79

MM-PC100

MM-S0330

MM-T0450

MM-TC100

MM-TRU10

MO1-10300

MO1-10350

MO1-11300

MO1-11350

MO1-13300

MO1-13350

MO1-16300

MO1-16350

MO1-RSA10

MO2-10300

MO2-11300

MO2-13300

MO2-16300

MT-00400

MT-00500

MT-00600

MT-AL005

MT-BK235

MT-BT020

MT-BT028

MT-BT032

MT-BT038

MT-BT045

MT-BT050

MT-BT055

MT-BTI10

MT-CRD20

MT-CRD21

MT-CRD28

MT-DE001

MT-DI001

MT-GDM01

MT-GDN33

MT-GDN50

MT-HDL30

MT-HDS30

MT-HHK24

MT-HHR07

MT-HHR13

MT-HKL21

MT-HKO21

MT-HKS15

MT-HRL27

MT-HRS27

MT-HTR10

MT-HTS10

MT-HW001

MT-IT100

MT-LMK13

MT-MAL10

MT-MMH10

MT-MMH20

MT-MRH10

MT-MRH20

MT-MSD20

MT-MUK02

MT-PP001

MT-RI030

MT-RI040

MT-SMD10

MT-SMK13

MT-TD110

MT-TD200

MT-TD280

MT-TD300

MT-TD320

MT-TD350

MT-TD380

MT-TD450

MT-TD500

MT-TD550

MT-TDN19

MT-TDN20

MT-TDN28

MT-TDN30

MT-TDN32

MT-TDN35

MT-TDN38

MT-TDN45

MT-TDN50

MT-TDN55

MT-TDS20

MT-TDS28

MT-TDS32

MT-TDS38

MT-TDS45

MT-TDS50

MT-TDS55

MT-TFA01

MT-TNL33

MT-TNL37

MT-TNL42

MT-TNL50

MT-TNL60

MT-TNS33

MT-TNS37

MT-TNS42

MT-TNS50

MT-TNS60

MT-TP420

MT-TP500

MT-TSD10

MT-UML21

MT-UMS21

MW-AN151

MW-APC49

MW-B1500

MW-B3500

MW-B5500

MW-CHC55

MW-CP013

MW-CP060

MW-CPC49

MW-CPH13

MW-CPH60

MW-CPS01

MW-CPS02

MW-CPS03

MW-CPS04

MW-CTP10

MWGP010

MW-GPC10

MWH-M0131/2

MW-I0470

MW-IC200

MW-IT100

MW-IT200

MW-MAC10

MW-P0010

MW-P1510

MW-PF550

MW-RSM10

MW-RSM48

MW-TAD10

MW-TAD20

MW-TAD30

MW-TAD40

MW-TPH50

MW-WMAC1

Index.Numeric Order

Cat. No. Cat. No. Cat. No. Cat. No.Page Page Page Page

105.

MD-A0010 MD-P0030

MD-MAC10MD-WMAC1

MD-P1530MD-P2530

MD-AN151MD-AN251

MD-GPC10MD-GP010

MD-CR010MD-CTP10MD-A1510MD-A2510

Catalog Number

MD-TAD10MD-TAD20MD-TAD30MD-TAD40

MD-CPS01MD-CPS02MD-CPS03MD-CPS04

Direct cementing transgingival post

Cementing abutment

Esthetic abutment

Esthetic angulated abutment

Angulated abutment

Gold abutmentCeramic - Zro2 abutment

Esthetic angulated abutment

Abutment description

Direct conical titanium post

Anatomic transgingival abutment

Premolars and Molars

Horizontal gingiva level

Crown/Implant angulation up to 4 degrees

Buccal-low levelPalatal-high level


Horizontal gingiva level


According to gingival heightavailable in heights of 1,2,3,4mm

Up to 4mm buccal Up to 6mm lingual/Palatal

Acording to gingival height available in heights of 1,2,3,4mm

Grinding the abutment shoulder to meet the gingival contour

Crown axis parallel to implant axis

Buccal-low levelLingual-high level

Crown/Implant angulation between 15-25 degrees

Grinding the abutment to meet the gingival height


Canine, Premolars& Molars

Incisors to Molars

Incisors to Premolars

Buccal-low levelLingual-high level


Any gingival profile




Up to 2 mm buccalUp to 4 mm lingual

Up to 2 mm buccalUp to 4 mm lingual


Anterior Mandible

Horizontal gingival level


Very low gingival height

Anterior Maxilla

Gingival Height

GingivalProfile

Crown Implant Inclination Ratio

Location




Indications for Using MIS Restorative Components* For recommendation purpose

Restorative components.

Table

106.

All rights reserved. No part of this publ icat ion may be reproduced, transcribed, stored in an electronic retrieval system, translated into any language or computer language, or be transmitted in any form whatsoever, without the prior written consent of the publisher.

MIS’s Quality System complies with international quality control standards: ISO 13485:2003 - Quality Management System for Medical Devices, ISO 9001: 2000 – Quality Management System and CE Directive for Medical Devices 93/42/EEC. MIS’s products are cleared for marketing in the USA and CE approved.

MIS Corporation. All rights Reserved.

MC-CIH06 Rev. 4

MIS Implants Technologies Ltd.www.mis-implants.com

®

Documents

Product Catalog