PRODUCT CATALOG - First Choice Equipment Sales & Servicefirstchoicedryingequipment.com/pdfs/2011_FC_Catalog.pdf 719.372.0990 CALL US 24/7 719.372.0990 AIR MOVERS Phoenix Centrifugal

PRODUCT CATALOG

719.372.0990FAX 719.372.0770

www.firstchoicedryingequipment.comCALL US 24/7

www.firstchoicedryingequipment.com 719.372.0990

719.372.0990CALL US 24/7

AIR MOVERSPhoenix Centrifugal Air Movers• 2-Speed, 1/3 Horsepower Motor • Maximum Velocity – 2700 FPM • Balanced Exhaust Airflow• Directional Airflow Horizontal, 45° Angle, 90° Angle• Durable, rugged, chemical resistant housing.

• Operator interface conveniently located for easy access• Phoenix Pilot Light and Sealed Switch are recessed• Ergonomic carry handle and power cord storage• Non-marking, anti-skid, rubber feet• On-board duplex GFCI outlet and circuit breaker

• Greater air velocities than competitive products • Focused velocities 0 to over 23.5 feet • Directs air flow towards problematic corners• Capable of reducing secondary damage claims• 3000 cfm • Long-life 2-speed motor

• Low noise, quiet operation• Lightweight and compact linear low density

polyethylene • Colored Restoration Red for high visibility • Ergonomic handle

Phoenix Axial Air Movers

Viking PDS-21• Lightweight & Stackable• On Board “Plug off System”• Fast Setup• 21 Outlets for more Drying Capacity• Warm Air for better Drying

• Compact Design• Replaceable Parts Obtainable at Large Box Retail

Stores• 2-Stage Tangenital By-Pass• Double Ball Bearings Construction

• Greater Air Velocities than Competitive Products• Focused Velocities• 3000 CFM at 2.5 AMPS• Long Life 2 Speed Motor• Directs Airflow Towards Problematic Corners

• Capable of Reducing Secondary Damage Claims• Lightweight and Compact• Linear Low Density Polyethylene Housing• Units Interlock for Ease of Stacking• Ergonomic Handle

Viking AX 3000

• 2-Speed 1/3 Horsepower Motor • Speed RPM AMPS , 115 VAC• Balanced Airflow for Quieter Operation• Directional Airflow Horizontal, 45° Angle, 90° Angle• Lightweight and Compact Polyethylene Housing

• Washable and Chemical Resistant• Units Interlock for Ease of Stacking• Ergonomic Handle• Integrally Molded Cord Wrap• Lowest AMPS with the Highest Airflow

Viking 2200 EX

• 2-Speed 1/3 Horsepower Motor • Speed RPM AMPS, 115 VAC • Balanced Airflow for Quieter Operation• Directional Airflow Horizontal, 45° Angle, 90° Angle• Lightweight and Compact Polyethylene Housing

• Washable and Chemical Resistant• Units Interlock for Ease of Stacking• Ergonomic Handle• Integrally Molded Cord Wrap• Lowest AMPS with the Highest Airflow

Viking 2200 EX w/GFIC

Viking ECO CAM PRO w/GFCI and ECO CAM• 1080 RPM / 2800 FPM / 1.6 AMP• Directional Airflow: Horiz. 450 Angle, 900 Angle• Balanced Air Flow• 1/3 Horsepower, Single-Speed• 2 Year Warranty

The EcoCAM is the ideal airmover for the Restoration Specialist, offering maximum airflow and premium features while consuming the fewest amps. This new Viking CAM is a powerhouse; drawing only 1.6 ±0.2 amps RMS.


719.372.0990 CALL US 24/7

GENERATORS

HEATING EQUIPMENT

Magnum Mobile GeneratorsMMG80, MMG100, MMG125, MMG150

Our mobile line of diesel generators fulfill larger power needs while maintaining exceptional mobility. Built for reliability and toughness, they excel in the most extreme conditions from the heat of the desert to the extreme cold of the Arctic Circle – taking power where and when our customers need it.

ELE 6400Thermal Evaporative Accelerator• Outperforms dehumidifiers 100% of the time• Works on 115v circuit or 230v splitter• 100F temperature rise capability • Digital thermostat with 12’ cable • Heavy duty construction, durability & built in pocket to protect thermostat• The ELE 6400 is NEC® compliant (National Electrical Code)• Quick and Safe Heating of Your Restoration or Building Site.• With the ELE 6400 there is No need for external air movement

2200 Windstorm

Filters for Dehumidifiers

Phoenix Internal Condensate Pump For Dehumidifiers

• Phoenix dehumidifier filters available for all models and sizes

• Stultz desiccant dehumidifiers aluminium a nd pleated

• Internal Condensate Pump with 20’ Lift

PARTS


719.372.0990CALL US 24/7

DEHUMIDIFIERSPhoenix 200 HT LGR Dehumidifier Phoenix 200 MAX LGR Dehumidifier

Phoenix R175 LGR DehumidifierPhoenix 270 HTx Refrigerant Dehumidifier

Phoenix 300 LGR Dehumidifier Phoenix R200 LGR Dehumidifier• High capacity – Up to 38 gallons per day• High energy efficiency – Plugs into a

grounded 115-V outlet• Pleated media filter – Built-in air filter

reduces dust and mold• Twist-on duct collar – Direct the drying

power where you need it• Optional high-efficiency filter – Removes

95% of one-micron particles• Reservoir pump system – Strong and

dependable, 20 ft of lift• Pump purge switch – Drains reservoir, no

spills or drips• Pump fail warning light and cut-off –

Prevents reservoir overflow• Lighted power switch – Check machine

status at a glance• Digital hour meter – Easy-to-read for more

accurate billing

The Phoenix R200 is a compact, energy efficient LGR dehumidifier that removes 125 pints per day (AHAM) while drawing only 8.3 amps of electricity. The R200 outperforms the larger competitive dehumidifiers by removing more water, providing larger grain depression and consuming less power. The proven LGR design is surrounded by a durable roto-molded high impact plastic to create a dehumidifier that is smaller and lighter than competitive units.

The Phoenix R175 combines our Proven Performance™ into a compact, state of the art, roto-mold design. The R175 reflects all the ingenuity and engineering expertise that is expected in equipment that bears the Phoenix name.

• Roto-mold design• 92 pints/day at AHAM• 6.1 amps of power• 12-inch recessed wheels• Telescoping handle• Solid state control panel• Multiple ducting options

The Phoenix 270HTx is one of the most effective and versatile drying devices available. The Phoenix 270HTx features more water removal (161 pints per day@AHAM) and higher grain depression that the other refrigerant dehumidifiers, while drawing only 8.9 amps of electricity.

The Phoenix 200 HT is the ultimate in low grain refrigerant dehumidification and high temperature performance. The 200 HT is the first LGR dehumidifier designed to maintain maximum water removal capacity through ambient conditions up to 120°F.The Phoenix 200 HT, featuring its patent-pending technology, not only allows superior performance and greater CFMs in high ambient temperatures, but also exceeds the performance and efficiency of the original Phoenix 200 MAX under all conditions.

• Improved water removal +16 gals/day (133 pints) AHAM (80ºF, 60%) 30 gals/day maximum

• Improved grain depression• The driest air from an LGR with

Multiple air filter options Standard 65% MERV-11, 57% MERV-8, or 95% MERV-14

• Multiple ducting options• 12” intake, 10” layflat supply• Less than 7.5 amps• Removes the most pints of water per

kilowatt• Internal pump with 30 feet of hose• Five-year warranty on the sealed

refrigeration system


719.372.0990 CALL US 24/7

DEHUMIDIFIERSPhoenix 200 MAX LGR Dehumidifier

• Widens the temperature range for LGR performance up to 140°F

• Increases water removal rates up to 100%• Increases grain depression up to 33% for

faster drying of more materials• Drives the grains/lb. in the drying area

from the mid 30’s to the low 20’s

Ingeniously designed to operate vertically or horizontally, the Phoenix D385 provides the wide operating range and ultra-low grains of a desiccant with the water removal capacity of the largest LGRs in cabinet dimensions identical to our popular Phoenix 200 Max.

Phoenix Solution Performance Amplifier

Phoenix D385 Portable Desiccant Dehumidifier

Desiccant Dehumidifiers700 CFM to 9000 CFMA modular desiccant dehumidification system for commercial and industrial applications with unique dehumidification requirements. Industrial design offers precision humidity/temperature control. The Modular concept provides design flexibility for a wide array of options, to form a self contained, TOTAL environmental control, packaged system.

Dry 700 Desiccant Humidifier• Self Contained, Skid or Heavy Duty Wheel Mounted on Solid Steel Axle• Single Point Power Connection • Delivers 700 cfm and removes 13.3 lbs. of H2O/hr. at 75°F/50% RH inlet conditions • Rugged Aluminum Cabinet Construction • Magnahelic Gauges for Balancing Air Flow Across Rotor • Air Inlet Filters: Aluminum Roughing Filters • 12” Self-Storing Power Cord • Proportional Controlled Electric Reactivation • Built in Air Proving and Temperature Overheat Protection • Beaded Air Connections: accommodates 8” round flex-duct

WATER REMOVAL

Phoenix Hydro-X Vacuum Pac

• Portable - applies all of its suction power at the source

• Rust and corrosion resistant stainless steel construction

• Built to withstand daily use • Heavy duty electricals • One year warranty on parts and labor • Can be used separately from the Hydro-X

Xtreme Xtractor • Full stainless steel chassis • Industrial vacuum and water pump • Optional port for other vacuum needs • Dual vac motors

Phoenix Hydro-X Xtreme Xtractor

• Patented suction roller • Self-propelled with positive chain drive — no belts

to break or adjust • Variable speed for every carpet and pad condition • Extracts in both forward and reverse • Rust and corrosion resistant stainless steel

construction • Built to withstand daily use • Heavy duty electricals • One year warranty on parts and labor


719.372.0990CALL US 24/7

CREDIT APPLICATIONFIRST CHOICE EQUIPMENT SALES SERVICE

906 L Street • Penrose, CO 81240Fax: 719.372.0770


719.372.0990 CALL US 24/7

ACCESSORIESPhoenixQuick Chamber System

PhoenixPsychrometric Calculator

PhoenixKestrel 3000 Multi-Meter

PhoenixHMI-41 Precision Thermo Hygrometer

Phoenix HM-34 Thermo Hygrometer

CEP Power Distribution Box

CEP Power Cord, 50 FT 50 AMP

• 8” Diameter x 25 Ft Section, Gray• 18” Diameter x 25 Ft Section• 20” Diameter x 25 Ft Section

Fexible Ducting

D-Ring Layflat Duct Connector

Plastic Layflat Tubing

T1-12060 12” POLY TUBING






Flexible, abrasion-resistant. Reliable performance to -40 degrees C, UL listed file number E-48380.

• Versatile adjustment — 27” out to 73”

• Lightweight rigid aluminum parts• “L” feet positively lock plastic will not

rotate or slip out of position• Spring clip retainers holds plastic to

maintain a tight seal• Carrying case with dividers• One Extender bar, extending the range

of any Quick Chamber to openings from 48” to 73”

Cost effective, time saving and reusable!Better connections and better airflow!Each BOX of D-Rings contains:18 - 18”, 18 - 12”, 18 - 8”, 18 - 6 “

Stainless Steel Clamp

Temporary power distribution center. 50 Amp 125/250 VoltUL listed for outdoor use.

• 9V battery • Attached probe • 0.2 um protective membrane filter • Carrying case • Lightweight, pocket-sized • Extendable probe • Automatic POWER-OFF • Measures humidity and temperature • Fast response

The Phoenix HMI-41 Precision Thermo Hygrometer is the fastest and most accurate humidity meter in the industry. It provides a convenient and reliable way to spot check relative humidity, temperature, dew point, and grains/lb.

Measures Air Flow , Temperature, Relative Humidity, Dew Point, Wind Chill and Heat Stress. User replace-able CR2032 coin cell battery with hard slip-on case

• Provides accurate moisture content information in an easy-to-use tool

• Helps avoid common data input errors • Accepts input data from 3% to 100%

relative humidity • Accepts temperature inputs from

20°F (-7°C) to 120°F (49°C)


719.372.0990CALL US 24/7

HEPA SYSTEMSOmniAire 2000V & 2000CAir scrubber for removal of toxic mold, asbestos and lead dust during renovation and abatement projects. Accessories include HEPA filter, activated carbon filters and germicidal UV-C light for removal of asbestos, lead, chemical fumes and biological contaminants. Provides cleaner and healthier environment at construction/renovation projects and industrial facilities.

OmniAire Nitro 600

Phoenix HEPA SystemsMini-Guardian & Guardian

The Phoenix Guardian HEPA System was the first portable air scrubbing device designed exclusively for the restoration industry. The Guardian can perform several critical air quality remediation functions simultaneously. The Mini-Guardian HEPA System is the compact, variable air speed version of our popular Phoenix Guardian HEPA System that offers fully variable air flow.

Mini-Guardian Features• Less than 2 amps • Compact design • Variable speed flow • Multiple ducting options • Stainless steel cabinet • Optional fourth stage carbon filter • Wheeled cart design

Guardian Features• 2-Speed operation (1400-900 CFM) • Multiple ducting options • Built-in manometer • Only 12 amps • Stainless steel cabinet • Optional fourth stage carbon filter • Wheeled cart design

The NITRO 600, portable air filtration machine with impact resistant polyethylene housing and performance you have learned to expect of OmniAire equipment. The NITRO 600 is UL/CSA listed for your safety and to meet your high expectations and many project requirements.

FIRST CHOICE DRYING EQUIPMENT906 L Street

Penrose, CO 81240Phone: 719.372.0990

Fax: 719.372.0770

[email protected]@bresnan.net

BETH HINTONCell: 719.240.4930

WADE LAUHONCell: 719.240.4929

Documents

PRODUCT CATALOG - First Choice Equipment Sales & Servicefirstchoicedryingequipment.com/pdfs/2011_FC_Catalog.pdf 719.372.0990 CALL US 24/7 719.372.0990 AIR MOVERS Phoenix Centrifugal