Product Catalogue 2021 - 2023 - VL Test UK

V L Test Systems LimitedAutomobile Safety Testing Equipment - Test Lanes

3/4 Middle Slade • Buckingham Ind. Park • Buckingham Bucks MK18 1WA Tel. 01280 822488 [email protected] www.vltestuk.com

UK Provider for Vehicle Safety and Emissions Testing Systems

Product Catalogue 2021 - 2023

Catalogus-UK-2012.indd 1 2/19/2013 7:57:10

2

INTRODUCTION

V L Test Systems have provided top of the range Roller Brake Testers and continue to provide first class customer service to the HGV, Transport Operations, Logistics, Emergency Vehicles, MOD, Breakdown & Recovery, Crane Operators and the Bus & Coach Industry.

New and returning customers have reaped the benefits of our world class Roller Brake Testers, with many complimenting their purchase and going for the full lane with Headlight Beam Tester, Wheel Play Detectors and Pit Jacks.

The equipment is manufactured at our state of the art production facility in Holland. Only the best materials are used to produce the products within the ISO9001 certified plant and that is why we have Brake Testers still performing into their third decade, having returned their investment value many times over.

Out on the road our Roller Brake Tester engineers have been supporting our customers to maximise up time and keep the vehicles & trailers on the road and not in the workshop. Engineers based in a network across the UK to ensure the Mean Time to Repair is kept very low, especially since journey times are minimal. Our expert Roller Brake Tester engineers are based in a network from Glasgow to Manchester to Somerset to Swindon to Eastbourne through the Home Counties to Kings Lynn to Sheffield to Newcastle. Our investment in vehicles and van stock clearly demonstrates that our customers remain the focus of our business; and all supplied from our purpose built Head Quarters and Warehouse in Buckingham.

We will be upgrade our IT systems to ensure that the total customer experience is enhanced in line with the anticipated 5G launch in the UK. We know that to continue to provide the excellent customer service, we have to always be the best and that is why we are investing in that vision.

Of course it is not all change, we are proud to continue with our certified memberships of the Garage Equipment Association (GEA), Institute of Road Transport Engineers (IRTE) and of course the Confederation of Passenger Transport (CPT).

Best regards,Brian Beacon

UK Executive & Company SecretaryV L Test Systems Ltd

Page2345678910111218192123252831

Contents: Introduction Driver and Vehicle Standards Agency Ministry of Defence Universal Roller Brake Tester (RBT) RBT Configuration Extra Heavy Duty Roller Brake Testers Subframes Side Slip Tester Load Simulators Play Detectors Roller Brake Tester Range Headlight Beam TestersSmoke Meters Tachographs Pit Jacks Other vehicle Testing Solutions Mobile Inspection Station Vehicle Inspection Station About V L Test Systems Limited 34

nhodges

Stamp

nhodges

Cross-Out

3

Driver and Vehicle Standards Agency (DVSA)VLT 16733/M5/HEAVY/P/CON

This unit can conduct the applied brake test and is the official Roller Brake Tester used by the Vehicle Inspectorate*.We offer you an identical systemincluding the licence to use the VI data base with a PASS/FAIL assignment.

We have manufactured and installed 162 units for the UK Vehicle Inspectorate, an Executive Agency of the Department of Transport and sold early 2012 approx. 1500 more units to pri-vate companies.

An ultra-modern HIGH TECH concept, developed by VLT in close co-operation with officials of the Vehicle Inspectorate.

For those in the business for some time, a reminder that VOSA was renamed to DVSA

Due to constant product improvement and innovation, VLT reserves the right to make changes without prior notice.

Technical specifications:

V L Test Systems Ltd.3/4 Middle Slade • Buckingham Ind. Park • Buckingham • Bucks MK18 1WA • United Kingdom

Tel 01280 822488 [email protected] www.vltestuk.com

Model VLT 16733/M5/HEAVY/P/CON VLT 20733/M5/HEAVY/P/CON VLT 24733/M5/HEAVY/P/CON

Measuring range low 0 - 800 kgf 0 - 1000 kgf 0 - 2000 kgfMeasuring range high 0 - 4000 kgf 0 - 5000 kgf 0 - 6000 kgfAxle weight with 50% braking 16000 kg 20000 kg 24000 kgMaximum drive-over weight 20000 kg 24000 kg 28000 kgTesting speed 1.3 / 2.6 km/h 1.3 / 2.6 km/h 1.15 / 2.3 km/hDimensions of rollers 260 x 1100 mm 260 x 1100 mm 260 x 1800 mmCentre-to-centre rollers 470 mm 470 mm 470 mmAll rollers raised by 40 mm 40 mm 40 mmMotor power (2x) 5.5 / 11 kW 5.5 / 11 kW 5.5 / 11 kWElectr. supply 80 Amps 80 Amps 80 AmpsWeight measuring system 18000 kg 24000 kg 28000 kgAlphanumeric display 16 digits 16 digits 16 digitsComputer database of approx. >12,700 vehiclesComputer Dual core - 2.6 GHz, HDD 160 Gb, incl. Windows XP ProfessionalMonitor TFT-LCD 19” On request available with lift VLT 16733/M5/HEAVY/P/CON/LIFT VLT 20733/M5/HEAVY/P/CON/LIFT VLT 24733/M5/HEAVY/P/CON/LIFT


4

SPECIAL ROLLER BRAKE TESTER DEVELOPED FOR MINISTRY OF DEFENCEVLT 20733/MOD and VLT 24733/MOD, both have NATO numbers


Model VLT 20733/MOD VLT 24733/MOD

NATO stock number W3/4910-99-769-3524 W3/4910-99-474-5325

Measuring range low 0 - 1000 kgf 0 - 2000 kgf

Measuring range high 0 - 5000 kgf 0 - 6000 kgf

Axle weight with 50% braking 20000 kg 24000 kg

Axle weighing system 0 - 24000 kg 0 - 28000 kg

Maximum drive over weight 24000 kg 28000 kg

Tes. ng speed Applied Brake 1.3 km/h 1.15 km/h

Tes ng speed Service Brake 2.6 km/h 2.3 km/h

Tes ng speed Scondary Brake 2.6 km/h 2.3 km/h

Dimensions of rollers 260 x 1100 mm 260 x 1800 mm

Centre-to-centre rollers 470 mm 500 mm

All rollers raised by 40 mm 40 mm

Motor power (2x) 5.5 / 11 kW 5.5 / 11 kW

Electrical supply 415 V, 3 phase 80 Amps 100 Amps

Roller locking device standard standard

Axle load simulator Yes, VLT 18630 no

Li ing device roller pair no Yes, VLT 18245/130

Read out unit, movable Yes, 4 dials Yes, 4 dials

Alphanumeric display 16 characters 90 mm 16 characters 90 mm

Computer control unit PC with 19” TFT/LCD PC with 19” TFT/LCD

Dimensions roller sets (2x) 1450 x 890 x 640 mm 2150 x 890 x 640 mm

One and/or Two men opera on One and Two men One and Two men

VLT 20733/MOD

VLT 24733/MOD

Note: More than 100 units have been supplied and installed to MOD sites worldwide by VLT.


5

Due to constant product improvement and innovation, VLT reserves the right to make changes without prior notice.Due to constant product improvement and innovation, VLT reserves the right to make changes without prior notice.

ROLLER BRAKE TESTER LIFTING DEVICE FOR USING ASUNIVERSAL ROLLER BRAKE TESTER SUITABLE FOR NORMAL ROLLER BRAKE TESTING,

FREELIFTING OF THE AXLE AND/OR AXLE LOAD SIMULATION “ALL.IN ONE”

For this Universal Roller Brake Tester, VLT has designed a special lifting device, installed under the roller sets, which gives this Roller Brake Tester all the flexibility you need.

A. Normal brake testing like a standardRoller Brake Tester.

B. Lifting one axle to increase thetesting weight by factor 1 to 3.

C. Use as Axle Load Simulator by tying downthe axle or chassis by chain/belts andlifting the Lifting System by using theremote control the Roller Brake Tester topredetermined axle weight.

Lifting device is available with a standard hydraulic pump or with an optional high speed hydraulic pump, both with propor-tional value system for accurate axle weight adjustment.

VLT supplies this lifting device in combination with our heavy duty models VLT 16633, VLT 16733, VLT 20733 and VLT 24733 (special version). Technical specifications lift system:

Models Roller Brake Tester suitable for using

on lift:VLT 16633, VLT 16733

and VLT 20733.Heavy Duty Models.

See pages 11, 12 and 13.

Model LD 180 LD 180/2

Li ing capacity 20000 kg 20000 kg

Li ing height 180 mm 180 mm

Motor power 3 kW 3 kW

Li ing me as li 11 sec 11 sec

Li ing me as axle load simulator - 5 - 11 sec

Subframe for RBT and li for pit VLT 16273/T2 VLT 16273/T2/P2

ubframe for RBT and li for non-pit installa on VLT 16276/T2 VLT 16276/T2/P4

Dummy set for later installation of Lift System VLT 14270.


6

VLT M5P 166335410152 CON.630 UK

relay box,emergency stop(wall-mounted)

16004877

roller sets,incl. roller locking deviceand axle weighing

service brake,parking brake,applied test

187334484

controller consoleread-out / display 0 - 800 / 0 - 4000 kgf,control lights,16 digits, 90 mm

166336743 GEN/UK

op onalpedestal, turn able column VLT 0955

Infrared UK remote control298670

VLT M5P 167335417272 HEAVY CON.652B UK


16004877


service brake,parking brake,applied test187334484

controller,TFT screen,keypad,control lights

keyboard

printer compartment

PC compartment

1673306001 (membrane keyboard)

1673306002(standard keyboard)

read-out / display 0 - 1000 / 0 - 5000 kgf,control lights,16 digits, 90 mm

207337043 GEN/UK

op onalpedestal, turn able column VLT 0955

RF UK remote control298620


16004877


service brake,parking brake,applied test

187334484

controller,TFT screen,keypad,control lights

keyboard

printer compartment

PC compartment

1673306001 (membrane keyboard)

1673306002(standard keyboard)

32” TFT/LCD monitorVLT 1832/W TFT LCD

pedestal, VLT 0901

RF UK remote control298620

VLT M5P 167335417472 CON.655B UK


7

Standard read-out

Optional 32” TFT monitorRear roller raised by 60 mm

Electrical motors in front of the rollers

Technical specifications special models 360 mm high:

Model VLT 14333/ M5P

VLT 16333/ M5P

VLT 14433/ M5P

VLT 16433/ M5P

VLT 16833/M5P/AGRI VLT 16833/M5P/ABGR/AGRI

Measuring range low 0 - 7000 N 0 - 8000 N 0 - 7000 N 0 - 8000 N 0 - 8000 N 0 - 8000 NMeasuring range high 0 - 35000 N 0 - 40000 N 0 - 35000 N 0 - 40000 N 0 - 40000 N 0 - 40000 NMax. axle weight with 50% braking 14000 kg 16000 kg 14000 kg 16000 kg 16000 kg 16000 kgMaximum drive-over weight 18000 kg 20000 kg 18000 kg 20000 kg 20000 kg 20000 kgTesting speed 2.6 km/h 2.6 km/h 2.6 km/h 2.6 km/h 2.6 km/h 2.6 km/hExtra testing speed 2.6 - 5.2 km/h 2.6 - 5.2 km/h 2.6 - 5.2 km/h 2.6 - 5.2 km/h 2.6 - 5.2 km/h 2.6 - 5.2 km/hRoller dimensions 260 x 1100 mm 260 x 1100 mm 260 x 1100 mm 260 x 1100 mm 260 x 1100 mm 260 x 1100 mmCentre-to-centre rollers 470 mm 470 mm 470 mm 470 mm 670 mm 670 mmRear roller raised by 60 mm 60 mm - - - -All rollers raised by - - 40 mm 40 mm 40 mm 40 mmMinimum / maximum test width (with VLT 14009)

800 x 3000 mm 800 x 3000 mm 800 x 3000 mm 800 x 3000 mm 800 x 3000 mm(with VLT 14079/T2/680)

800 x 3000 mm(no subframe)

Minimum / maximum test width (with VLT 14004)

1000 x 3200 mm 1000 x 3200 mm 1000 x 3200 mm 1000 x 3200 mm

Facility for other testing width yes yes yes yes yes yesMotor power (2x) 11 kW 11 kW 11 kW 11 kW 11 kW 11 kWElectr. supply at 400 V, 3 Ph, 50 Hz 63 Amps delay 63 Amps delay 63 Amps delay 63 Amps delay 63 Amps delay 63 Amps delayWeight measuring system range 0 - 16000 kg 0 - 18000 kg 0 - 16000 kg 0 - 18000 kg 0 - 20000 kg 0 - 20000 kgAlphanumeric display 100 mm 16 digits 16 digits 16 digits 16 digits 16 digits 16 digitsRoller set dimensions (2x) all models (2x) 1450 x 1350 x 360 mm (2x) 1450 x 1550 x 360 mm 3120 x 1550 x 360 mm

(3720 x 1550 x 360 mm with 1400 mm rollers)

Net weight 2180 kg 2185 kg 2180 kg 2185 kg 2325 kg 2490 kg (2740 kg)

All rollers raised by 40 mmElectrical motors in front of the rollers

[3] Roller set with raised rear rollers [4] Roller set rollers at same level

VLT EXTRA HEAVY DUTY ROLLER BRAKE TESTERS SPECIAL 360 MM HIGHModels VLT 14333/M5P: 18/14 ton, VLT 16333/M5P: 20/16 tonModels VLT 14433/M5P: 18/14 ton, VLT 16433/M5P: 20/16 ton

Models VLT 16833/M5P/AGRI: 20/16 ton

AGRI models

360

Note: Drive-on/off ramps are optionalABGR/AGRI model

AGRI model

670470470

8

Roller Brake Tester Series Inspection Pit Axle Load Simulator Rollerset Lift Subframe

VLT 120/140/160X00 VLT 13003/T2

VLT 120/140/160X00 VLT 13007/T2

VLT 120/140/160X00 VLT 13037/T2

VLT 14/16/20X00 VLT 14003/T2

VLT 14/16/20X00 VLT 14007/T2

VLT 14/16/20X00 VLT 14027/T2

VLT 14/16/20X00 VLT 16273/T2

VLT 14/16/20X00 VLT 16273/T2/P2

VLT 14/16/20X00 VLT 16276/T2

VLT 14/16300 /400 VLT 14004/T2

VLT 14/16300 /400 VLT 14009/T2

VLT 14/16300 /400 VLT 14079/T2

SubframesVLT advises the use of a subframe for installing the roller sets into the concrete floor.All VLT subframes are robot welded and then hot dipped galvanised.

for inspection pit, no load simulator,

no rollerset lift (VLT 13007T2, VLT 14007/T2)

for inspection pit, with load simulator,

no rollerset lift (VLT 13003T2, VLT 14003/T2)

no inspection pit, no load simulator,

no rollerset lift,with optional safety barriers

(VLT 13037T2, VLT 14027/T2)


with rollerset lift,(VLT 16273/T2/P2)


for reduced height rollersets,(VLT 14004/T2)

9

VLT SIDE SLIP TESTERSVLT 3942/20 and VLT 3943/20

FOR HEAVY GOODS VEHICLES AND BUSES

VLT supplies a wide range of Side Slip Testers for heavy vehicles. Robust construction for long life span, especially designed for their special purpose and specifications.

The VLT Side Slip Testers are connected to a VLT Roller Brake Tester controller and displayed on the alphanumeric display or on a large TFT-LCD monitor, depending on the configuration of the system.

VLT FREE ROLLER SETS (BOOGIE ROLLERS)VLT offers two types of free roller sets, developed for intensive and heavy use in automobile Test Stations.

There are two models; the first one is a 8000 kg three rollers pair and the second one is a 16000 kg four rollers pair. Both models have a hydraulic lifting system between the rollers and a Roller Locking System for safe driving over the rollers when not in use, and for easy driving out of the rollers after use of the free rollers.

Free rollers are needed for testing speed on Speedometers for vehicles with double drive axles and can be used for older types of vehicles with double drive rear axles in combination with a transmission hand brake on the propeller shaft. On modern vehicles transmission handbrakes are no longer installed.

The VLT free roller sets have an aluminium coating on the rollers as corrosion protection. Again, VLT decided to use the more expensive hydraulic lifting and braking system instead of the more common pneumatic system because the hydraulic system is more powerful and more reliable.

Normally the VLT Speedometer and the VLT free roller set share the same hydraulic pump and are controlled by the VLT Speedometer controller.



Model VLT 3942/20 VLT 3943/20Linear up to wheel load of 6500 kg 6500 kgMaximum drive-over weight (wheel) 10000 kg 10000 kgDimensions of drive-over plate 950 x 800 mm 950 x 800 mmDimensions of compensation plate 245 x 800 mm 245 x 800 mmMeasuring range toe in / toe out -20 / 0 / +20 mm/m

Contact sensor drive-in / drive-out no yes, twoin and out

Rigid counter plate opposite VLT 39411 VLT 39411Optional subframe VLT 3908 VLT 3909

ONE MODEL FOR STAND-ALONE AND/OR TEST LANE USE

VLT 8103 VLT 16104

Maximum testing speed standard 120 km/h 100 km/hMaximum testing speed short time 140 km/h 120 km/hNumber of rollers each side 3 4Roller dimensions 238 x 950 mm 238 x 1100 mmCentre-to-centre rollers 290 mm 290 mmWorking length (driving direction) 580 mm 870 mmMaximum testing weight (axle) 8000 kg 16000 kgMaximum drive-over weight (axle) 10000 kg 20000 kgLifting / braking system rollers hydraulic hydraulicHydraulic supply from speedometer pump from speedometer pumpRoller set dimensions (2x) (w x l x d) 1280 x 1015 x 640 mm 1430 x 1255 x 640 mmApprox. nett weight 1990 kg 2660 kg

HYDRAULIC PUMP OPTION (IF NOT IN COMBINATION WITH VLT SPEEDOMETER TESTER)Hydraulic pump unit 400 Volt, 3 Ph 3.0 kW 3.0 kW

Speedometer tester Free Roller Set Roller Brake Tester

Monitor display (Test Lane version)

10

VLT AXLE LOAD SIMULATORS

Technical specifications (classic Load Simulator):

Model VLT 18640 VLT 18660 VLT 18630Maximum pulling force 4000 kg 6000 kg 10000 kgRegulated between 500 - 4000 kg 600 - 6000 kg 1000 - 10000 kgCylinder diameter ø 60 mm ø 70 mm ø 90 mmCylinder stroke 250 mm 250 mm 250 mmNumber of cylinders 2 2 2Motor power 3.0 kW 3.0 kW 3.0 kWElectrical supply 230 / 400 V, 3 Ph, 50 HzMaximum hydraulic pressure 100 bar 115 bar 100 barTie down type belts belts belts / chainsModels for connecting to VLT 9054 PRC Play Detector

VLT 18540 VLT 18560 VLT 18530

VLT AXLE load simulators (classic way)A range of three different Axle Load Simulators is available from 4000 kg - 6000 kg and 10000 kg pulling force by two dual action hydraulic cylinders.

These three models can be offered with their own hydraulic pump or can be connected to our VLT 9054/MK2 Play Detector pump unit which has an extra valve set for connecting one of the Load Simulators.

Load adjustment through proportional pressure regulated valve.

Classic way

VLT new way of load simulation

Please see page 7

Load Simulation by use of RBT Lifting Device

Load Simulation by use of RBT Lifting Device

Classic way Load Simulator

11

VLT PLAY DETECTORS

Plate left Plate right VLT 9152 offers manual or automated

program cycles of more than 16 movements


Plate left Plate rightVLT 9043/EURO has

8 movements of the plates

Model VLT 9043/EURO VLT 9152/PR/CR VLT 9054/PRC/CRMaximum axle weight 20000 kg 20000 kg 20000 kgMaximum wheel weight 10000 kg 10000 kg 10000 kgTotal maximum movement 200 mm 200 mm 200 mmMaximum movement each side 100 mm 100 mm 100 mmHorizontal force, opposite 60 kN 60 kN 60 kNHorizontal force, on each plate 30 kN 30 kN 30 kNCars, light goods vehicle program no yes yesHeavy goods vehicle, buses program yes yes yesExtra connection port for load simulator no no yesSpecial steering facilities no no noPit dimensions all models 725 x 985 x 160 mm, use subframe VLT 9005/T2 or VLT 9006/T2Motor power 3.0 kWElectrical supply 230 / 400 V, 3 Ph, 50 HzAutomated program cycles no yes yesManual program yes yes yesRemote control / hand lamp by cable cable remote or radio frequencyMovement of the plates 8 >16 >16

VLT play detectorsWe offer our Extremely Heavy Tolerance Play Detectors with hydraulic pump unit.Large movements, low maintenance, easy to operate, mostly by radio frequency controlled remote control including models with automatic program cycles besides manual operation.

Special model VLT 9054/PRCVLT supplies its special model VLT 9054, which has the same specifications as the VLT 9152, but the hydraulic pump unit has an extra valve set for connection of one of the VLT Load Simulators.

12

VLT ROLLER BRAKE TESTERSVLT ROLLER BRAKE TESTERS CARS • TAXIS • LIGHT GOODS VEHICLESCARS • TAXIS • LIGHT GOODS VEHICLESBRAKE TESTER MODEL SERIES

MAX. AXLE WEIGHT (kg)

VLT 2500 2500

VLT 32/42/5200 3/4/5000

VLT 4400 4000


Model VLT 2522/M/ EURO 4

VLT 2533/M/ EURO 4

VLT 4422/M VLT 4433/M

Measuring range 0 - 6200 N 0 - 6200 N 0 - 10000 N 0 - 10000 NMaximum axle weight with 50% braking

2500 kg 2500 kg 4000 kg 4000 kg

Maximum axle weight with 70% braking 1750 kg 1750 kg 2850 kg 2850 kg

Maximum drive-over weight 4000 kg 4000 kg 5000 kg 5000 kgTesting speed 5.0 km/h 5.0 km/h 5.0 km/h 5.0 km/hRoller dimensions 200 x 700 mm 200 x 700 mm 220 x 860 mm 220 x 860 mmCentre-to-centre rollers 375 mm 375 mm 420 mm 420 mmAll rollers at same level same level same level same levelMinimum / maximum test width

800 x 2200 mm 800 x 2200 mm 800 x 2500 mm 800 x 2500 mm

Motor power (2x) 3.8 kW 3.8 kW 5 kW 5 kWElectrical supply 20 Amps delay 20 Amps delay 25 Amps delay 25 Amps delayFacility for upgrading to VLT 2533/M/

EURO 4- VLT 4433/M -

Weight measuring system range

optional 0 - 3000 kg optional 0 - 5000 kg

Pedestal for monitor standard standard standard standardDrive-over cover plates optional optional optional optionalRadio remote control standard standard standard standardPrinter and RS 232 interface standard standard standard standardRoller locking device optional optional optional optionalPedal force transmitter optional optional optional optionalOpt. subframe for concrete floor

VLT 2605/T2 VLT 2605/T2 VLT 4405/T2 VLT 4405/T2

VLT ROLLER BRAKE TESTERS2500 kg series VLT 2500/M/EURO 4, 4000 kg series VLT 4400/M

VLT 2500 AND VLT 4400 SERIES BRAKE TESTERSThe models in the VLT 2500/VLT 4400 series are especially designed for testing cars and vans. Axles with a weight up to 2500 kg (VLT 2500) or 4000 kg (VLT 4400) can be tested.

These Brake Testers have all rollers at floor level. There are two standard models for each series. One without weighing and one with weighing system. For the models with weighing system, our subframe needs to be installed.As read-out a 22” TFT monitor in console on a pedestal is standard. Also available are a wall mount bracket, an adjustable pedestal and console VLT 0847.

The robust structure of our testing systems together with the available options for extensions guarantee a long technical and economical life time.

Options available at time of ordering Roller Brake Tester:VLT 2039 / VLT 3239Opposite rotating of rollers (4x4)VLT 2538 / VLT 3238Roller locking device (best option)

Printers, keyboard, pedestals, printer/keyboard consoles, pedal force transmitters by cable or radio frequency, PC computer, Brake Data software, etc. on request at time of ordering or later.

Standard 22” TFT readout on pedestal

Standard 22” TFT readout with optional wall-mount

VLT 2533/M/EURO 4 + Subframe VLT 2605/T2 VLT 4433/M + Subframe VLT 4405/T2

13

VLT ROLLER BRAKE TESTERS 3000 KG, 4000 KG AND 5000 KGSeries VLT 3222/3233/M/P/22, VLT 4222/4233/M/P/22 and VLT 5222/5233/M/P/22


Model VLT 3222/M/P/22 VLT 3233/M/P/22 VLT 4222/M/P/22 VLT 4233/M/P/22 VLT 5222/M/P/22 5233/M/P/22Measuring Range each wheel 0 - 8000 N 0 - 8000 N 0 – 10000 N 0 – 10000 N 0 – 12500 N 0 – 12500 NMax. Axle weight with 50% braking 3000 kg 3000 kg 4000 kg 4000 kg 5000 kg 5000 kgMax. Axle weight with 70% braking 2300 kg 2300 kg 2900 kg 2900 kg 3600 kg 3600 kgMaximum drive-over weight 4000 kg 4000 kg 5000 kg 5000 kg 6000 kg 6000 kgAxle weight measuring range - 50 – 3500 kg - 50 – 4500 kg - 50 - 5500 kgTesting Speed 5.2 km/h 5.2 km/h 5.1 km/h 5.1 km/h 4.2 km/h 4.2 km/hRoller dimensions 220 x 750 mm 220 x 750 mm 220 x 860 mm 220 x 860 mm 220 x 860 mm 220 x 860 mmAll Rollers at Floor level Floor level Floor level Floor level Floor level Floor levelMinimum / Maximum test width 1 750 x 2250 mm 750 x 2250 mm 730 x 2450 mm 730 x 2450 mm 730 x 2450 mm 730 x 2450 mmMinimum / Maximum test width 2 650 x 2150 mm 650 x 2150 mm 880 x 2600 mm 880 x 2600 mm 880 x 2600 mm 880 x 2600 mmMinimum / Maximum test width 3 500 x 2000 mm 500 x 2000 mm 480 x 2200 mm 480 x 2200 mm 480 x 2200 mm 480 x 2200 mmMotor Power (2x) 4.0 kW 4.0 kW 5.5 kW 5.5 kW 5.5 kW 5.5 kWMotor voltage standard, 3 Phase 50 HzMotor voltage on request, 3 phase 60 Hz

380/400 Volt 440/480 Volt

380/400 Volt 440/480 Volt

380/400 Volt 440/480 Volt

380/400 Volt 440/480 Volt

380/400 Volt 440/480 Volt

380/400 Volt 440/480 Volt

Facility to upgrade to (*) VLT 3233/M/P/22 - VLT 4233/M/P/22 - VLT 5233/M/P/22 -Drive-over cover plates Optional Optional Optional Optional Optional OptionalRadio remote control Standard Standard Standard Standard Standard StandardPrinter and RS 232 interface Standard Standard Standard Standard Standard StandardOptional Sub frame for concrete floor VLT 3205T2 VLT 3205/T2 VLT 4005T2 VLT 4005T2 VLT 4005T2 VLT 4005T2* Facility to upgrade to RBT with weighing system only when installed in VLT original Sub frame suitable for weighing system.M: MPU Controller – P: Planetary gearbox – TFT 32” on request. Test Lane Model with only Controller on request.

® Patent Pending

VLT’s MOTOR DRIVEN ROLLER CONCEPT EVEN UNIQUE AS SPECIAL.After four years of intensive research VLT has developed the ultimate solution for Roller Brake Testers up to 5000 kg axle weight. VLT’s Motor Driven Rollers are the most innovative solution for Roller Brake Testers nowadays. Strong benefits of this design:• No longer losses of Brake Force due to misalignment. • Internal wear and losses in Gearbox / Motor

Combination Compensated. • Brake Force measurement direct on the Rollers. • Real Brake Force Readings. • By making use of a two step oversized Planetary

gearbox suitable to test: Electrical operated Hand or Parking Brakes in Applied Test mode (this is a Hand Brake Test against locked wheels)

• High IP 65 Protection • Available in three Roller Lengths 750 mm – 860 mm and

1050 mm by 220 mm Roller diameter. • Optional Roller Locking devices installed inside the

Rollers. • Very compact construction.• Low maintenance. • Roller Body made out high tension T 6 Aluminum, no

corrosion. • VLT solutions are known for the highest quality in the

Industry. • Available as VLT3200, VLT 4200 and VLT 5200 series in

standard and/or special versions. As stand-alone, as combination with Suspension Tester and Side Slip Tester (Mini Test Lane) or as fully integrated part of Automated VLT Test Lane.

Standard model Optional with Console

14

VLT ROAD CONTACT/SUSPENSION/ROLLER BRAKE TESTER COMBINATIONSVLT 362522/M/E/22”TFT, VLT 364222/M/P/22”TFT, VLT 365222/M/P/22”TFT

Technical specifications Roller Brake Testers:

Technical specifications Road Contact Suspension Testing System:

Model VLT 362522/M/E/22”TFTVLT 2522/M/E/22”TFT

VLT 364222/M/P/22”TFTVLT 4222/M/P/22”TFT

VLT 365222/M/P/22”TFTVLT 5222/M/P/22”TFT

Measuring range low 0 - 6200 N 0 - 5000 N 0 – 6250 NMeasuring range high - 0 - 10000 N 0 – 12500 NMax. axle weight with 50% braking 2500 kg 4000 kg 5000 kgMax. axle weight with 70% braking 1750 kg 2800 kg 3600 kgMax. drive-over weight 4000 kg 5000 kg 6000 kgTesting speed 5.0 km/h 5.1 km/h 4.2 km/hRoller dimensions 200 x 700 mm 220 x 860 mm 220 x 860 mmCentre-to-centre rollers 375 mm 420 mm 420 mmAll rollers at floor level floor level floor levelMinimum / maximum test width 800 x 2200 mm 730 x 2450 mm 730 x 2450 mmMotor power (2x) 3.8 kW 5.5 kW 5.5 kWEl. supply at 400 V, 3 Ph, 50 Hz 20 Amps delay 20 Amps delay 20 Amps delayMonitor display 22” LCD-TFT 22” LCD-TFT 22” LCD-TFT Drive-over cover plates optional optional optionalRadio frequency remote control standard standard standardPrinter and RS 232 interface standard standard standardPedal force transmitter optional optional optionalOptional subframe VLT 362605/T2 VLT 364005T2/730x2450 VLT 364005T2/730x2450

Note: axle weight is measured by the Suspension Tester.

VLT 362522/M/E/22”TFT, VLT 364222/M/P/22”TFT, VLT 365222/M/P/22”TFT

VLT Road Contact – Suspension / Roller Brake Testers as Stand-alone version. The most advanced solution to offer your Vehicle owners the service they expect from you as Service – maintenance organization.This equipment is made for heavy use! Same as you find in the better equipped Vehicle Testing Stations.Standard available with nice and clear 22”TFT Monitor in Console on Pedestal and wall console for Controller box and motor relays. Or as top model with Style full Console with printer compartment and keyboard shelf. Really an eye catcher in your workshop.

With the purchase of this combination you get the best equipment available in the market. The Road contact Tester operates according the well-known EUSAMA principle. No reference value needed, just give you the correct Safe / Unsafe conditions of the Vehicle.In addition to the usual road contact values, the following values are also measured and displayed: the contact value difference, resonance frequency and wheel weight at minimum contact value, tyre pressure value, wheel weight and axle weight. There is a general final evaluation so that all these values do not have to be interpreted after every test. This is indicated by means of green, orange and red icons.

The Suspension Tester is used in combination with the Brake Tester. The two pieces of equipment are fitted in one single frame, monitored by the same computer. In our standard configuration we make use of a 22”TFT Monitor. The axle weight measured by the Suspension Tester is also used for the calculation of the brake efficiencies.

The VLT 3673/MK2 is the more advanced development of the VLT 3673/M fully based on the EUSAMA principle. The VLT 3673/MK2 has, besides the EUSAMA principle, the new developed phase shift included which makes the EUSAMA measuring somewhat more flexible for the lower wheel weights of smaller vehicles.

Model VLT 3673/M or VLT 3673/MK2Measuring principle Eusama Eusama + phase shiftMotor power (2x) 3.0 kW 3.0 kWMeasuring frequency 25 - 0 Hz 25 - 0 HzFreq. regulated by freq. inverter no yesVertical plate movement 6.0 mm 6.0 mmDim. of measurement plate (2x) 400 x 700 mm 400 x 700 mmWeight measuring system range 25 - 1500 kg each wheel / 50 - 3000 kg per axleMaximum drive-over weight 5000 kg 5000 kg

The above mentioned combinations can easily be extended with a VLT Side Slip Tester.We offer our VLT 3932 for stand-alone use and our VLT 3933 / 3934 for automatic Test Lane use.

Model VLT 3932/MK2 VLT 3934/MK2Linear up to wheel load of (axle) 3500 kg (7000 kg) 3500 kg (7000 kg)Max. drive-over weight wheel (axle) 5000 kg (10000 kg) 5000 kg (10000 kg)Dimensions of drive-over plate 650 x 700 mm 650 x 700 mmDimensions of compensation plate 195 x 700 mm 195 x 700 mmMeasuring range toe in / toe out -20 / 0 / +20 mm/m -20 / 0 / +20 mm/mContact sensor drive-in / drive-out no yesRigid counter plate opposite VLT 39331 VLT 39331Optional subframe VLT 3918 VLT 3919

Technical specifications Side Slip Testers:

Standard model Optional with Console

® Patent Pending

/ / / , / / / , / / /

® Patent Pending

15

VLT ROAD CONTACT/SUSPENSION TESTERSVLT 3673/M - VLT 3673/MK2

VLT SIDE SLIP TESTERSVLT 3932/20 and VLT 3934/20



Model VLT 3673/M VLT 3673/MK2Measuring principle Eusama Eusama + phase shiftMotor power (2x) 3 kW 3 kWMeasuring frequency 25 - 0 Hz 25 - 0 HzFrequency regulated by frequency inverter no yesVertical plate movement 6.0 mm 6.0 mmMax. testing axle weight 2500 kg 2500 kgMax. drive-over axle weight 5000 kg 5000 kgDimensions of measurement plate (2x) 400 x 700 mm 400 x 700 mmWeight measuring system 25 - 1500 kg each wheel / 50 - 3000 kg per axleDimensions of measurement unit (w x l x d) 2350 x 500 x 255 2350 x 500 x 255Optional subframe VLT 3605/T2 VLT 3605/T2Optional subframe for heavy lane VLT 3610/MR/T2 VLT 3610/MR/T2

Model VLT 3932/20 VLT 3934/20Linear up to wheel load of (axle) 3500 kg (7000 kg) 3500 kg (7000 kg)Maximum drive-over weight wheel (axle) 5000 kg (10000 kg) 5000 kg (10000 kg)Dimensions of drive-over plate 650 x 700 mm 650 x 700 mmDimensions of compensation plate 195 x 700 mm 195 x 700 mmMeasuring range toe in / toe out -20 / 0 / +20 mm/m -20 / 0 / +20 mm/mContact sensor drive-in / drive-out no yes, two, one IN, one OUTRigid counter plate opposite VLT 39331 VLT 39331Optional subframe VLT 3918 VLT 3919

VLT 3673/M AND VLT 3673/MK2The Suspension Tester operates according to the well-known EUSAMA principle. However, the diagnostic options are not restricted to the contents of this specification. In addition to the usual road contact values, the following values are also measured and displayed: the contact value difference, resonance frequency and wheel weight at minimum contact value, tyre pressure value, wheel weight and axle weight. There is a general final evaluation so that all these values do not have to be interpreted after every test. The Suspension Tester can be used in combination with a VLT Brake Tester. The two pieces of equipment are monitored by the same computer. A single display cabinet is used for the two pieces of equipment. The axle weight measured by the Suspension Tester is also used for the calculation of the brake efficiencies.Models with 22”, 27” and 32” large TFT-LCD monitors with full colour display for information and results.The VLT 3673/MK2 the more advanced development of the VLT 3673/M fully based on the EUSAMA principle. The VLT 3673/MK2 has beside the EUSAMA the new developed phase shift included what made the EUSAMA measuring somewhat more flexible for the lower wheel weights of smaller vehicles.Further more the frequency at the VLT 3673/MK2 is controlled by a frequency inverter.

VLT SUSPENSION TESTERS ARE DESIGNED TO IMPROVE SAFETY ON THE ROAD. MODELS FOR UP TO 2500 KG AXLE WEIGHT.

VLT 3932/20 AND VLT 3934/20, FOR CARS AND LIGHT GOODS VEHICLESVLT supplies a wide range of Side Slip Testers for cars and light goods vehicles. Robust construction for a long life span, especially designed for their special purpose and specifications. The VLT Side Slip Testers are connected to a VLT Roller Brake Tester controller and displayed on the digital display or on a TFT-LCD monitor, depending on the configuration of the system.

16

VLT 2106 CARAVAN ROLLER BRAKE SIMULATOR WITH FLOOR RAIL (THE ORIGINAL)VLT 2810 CARAVAN ROLLER BRAKE SIMULATOR MOBILE UNIT FOR PRODUCTIVITY

VLT Caravan Roller Brake Simulator VLT 2106

PLAY DETECTOR SERIES FOR CARS AND LIGHT GOODS VEHICLESPLAY DETECTOR SERIES

With our Play Detectors for cars and light goods vehicles, we offer our customers a high quality

product with all possibilities to detect in no time play and wear on vehicles.

Plate left Plate rightVLT 9033 and VLT 9036 have 16 movements of the plates

manual or automated program cycles


Plate left Plate right

Our model VLT 9036 has extra steering facilities to turn the wheel left and right

Model VLT 9032 VLT 9033/PR/CRVLT 9033/PR/RF

VLT 9036/PR/CRVLT 9036/PR/RF

Maximum axle weight 5000 kg 5000 kg 5000 kgMaximum wheel weight 2500 kg 2500 kg 2500 kgTotal maximum movement 140 mm 140 mm 140 mmMaximum movement each side 70 mm 70 mm 70 mmHorizontal force, opposite 36 kN 36 kN 36 kNHorizontal force, on each plate 18 kN 18 kN 18 kNSpecial steering facilities no no yesPit dimensions all models +/- 540 x 740 x 130 mm (2x)Upper plates dimensions all models 590 x 720 mmMotor power all models 2.2 kWElectrical supply all models 230 / 400 V, 3 Phase, 50 HzAutomated program cycles no yes yesManual program yes yes yesRemote control / hand lamp by cable by cable radio frequencyMovement of the plates 8 >16 >16 + 2Subframe order no. all models VLT 9003

Model /PR/CR programmed cable remote controlVLT 9033/PR/CR - VLT 9036/PR/CR

VLT Caravan Roller Brake Simulator VLT 2106THE ORIGINAL CARAVAN ROLLER BRAKE SIMULATOR The VLT Caravan Roller Brake Simulator operates the brake mechanism on the triangle of the caravan. The Brake Simulator also holds the caravan in the roller sets of the Brake Tester. The mechanism in the Brake Simulator, which is activated by hand, Causes force through the coupling device on the overrun brake.This force is measured with a gauge and is displayed on the LED Display or Monitor of the Roller Brake Tester. A simulator locking rail must be ordered separately. Only in combination with VLT Light models Roller Brake Tester and for Heavy models with adapted software.Model VLT 2106 needs a rail to be concreted into the workshop floor: VLT 2106-300 Rail of 3 meterVLT 2106-400 Rail of 4 meterVLT 2106-500 Rail of 5 meter

NOW Available from VLT The All New Mobile Roller Brake Tester Caravan / Trailer Simulator VLT 2810This Caravan Simulator does in fact the same as the Original Model VLT 2106, but there is no need to install the floor rails anymore. It can handle Light Trailers with overrun Brakes up to 3000 kg. The VLT 2810 will be hooked on between the pulling Vehicle and The Caravan / Trailer. The Caravan can be picked up by the Simulator VLT 2810 from outside and bring the Caravan and Simulator up to the Roller Brake Tester, and after the Tests are completed bring the Caravan or Trailer back to the outside/parking area.Available for standard 50 mm ball coupling or for the open Nato Military coupling, or combination of both.Connection Simulator to Roller Brake Tester by cable or by wireless Radio Frequency. Ask for more information.

Model /RF programmed radio frequency remote controlVLT 9033/PR/RF - VLT 9036/PR/RF

VLT Caravan / Trailer Roller Brake Simulator VLT 2810 (Mobile)

17

VLT MOTORCYCLE ROLLER BRAKE TESTERSVLT 0573/M/22”/TFT


Model VLT 0573/M/22”/TFTMeasuring range 0 - 4000 NMaximum wheel weight 750 kgMaximum drive-over weight 1000 kgTesting speed 5.2 km/hRoller dimensions 260 x 350 mmCentre-to-centre rollers 350 mmRollers raised by 40 mm*Motor power (2x) 2.7 kWElectr. supply at 400 V, 3 Phase, 50 Hz 16 AmpsWeight measuring system range 20 - 1000 kgDrive-over cover plates optionalPrinter and RS 232 interface standardOptional subframe for concrete floor VLT 0507/T2Model number for test lane version VLT 0573/M/TL

VLT 0553/EURO Motorcycle wheel clamping device with alignment for checking the frame of the motorcycle

VLT 0554/EURO Motorcycle wheel clamping device, rigidVLT 0556/T2 Special subframe to install in the concrete floor, for VLT 0553/EURO - VLT 0572/

VLT 0573 and VLT 0554/EURO or two times VLT 0554/EURO with VLT 0572/VLT 0573

VLT 0592 Hydraulic pump unit with controls for operating two clamping devices

* = above floor level

Note: when ordering the clamping devices and subframe, there is no need to order subframe VLT 0507/T2.

VLT 0573/M/22”/TFTAll new VLT motorcycle Roller Brake Testers, especially designed for high throughput inspection stations, are also available as stand-alone for the after-market. These can be used in workshops, motor clubs or police stations and (as originally designed for) inspection stations.

This Roller Brake Tester is available as stand-alone unit with TFT-LCD monitor in 22“ size, and of course as part of a fully automated motor cycle inspection lane.

Illustrated optional console,left top the standard readout.

Motorcycle Roller Brake Tester with Wheel Clamping Devices. Pictures as installed in Automated Test Lane.

(Standard) (Optional Console)

VLT 0554/EUROVLT 0573/M/22”/TFTVLT 0554/EURO

18

VLT HEADLIGHT BEAM TESTERS FOR TEST LANE USE: FULLY AUTOMATED AND MANUAL MODELS

VLT 0936/MK2 Test Lane VersionFully digital computer controlled CCD Headlight Beam Tester, with fully automated vertical and horizontal movements, with automated searching of the hot spot of the beam.

This robot type Headlight Beam Tester is connected to the Vehicle Test Lane Computer System and displays instructions and results on one of the large overhead TFT/LCD monitors of the Test Lane.

VLT 0939TL01 Manual Model for Integrated use in VLT Test LanesManual Headlight Beam Tester with the same measuring techniques as our fully automated models. This manually operated model for use in VLT Test Lanes has a cable connection to the Test lane Computer. Including rechargeable battery pack and charger.

VLT 0939TL02RF Advanced Manual Model for Integrated use in VLT Test Lanes Manual Headlight Beam Tester with The same measuring techniques as our fully automated models. This manually operated model for use in VLT Test Lanes comes with RF (Radio Frequency) communication with the Test Lane Computer. Including Battery pack and battery charger (charging overnight)

VLT7457 MK2 Headlight Beam Tester (HBT)Our most popular Headlight Beam Tester, there are thousands of these units in active use throughout the UK. This unit is Robust and excellent value for money. It contains the following components:

Optical unitThe blue optical unit contains the lens, the internal panel with aiming screen, a spirit level, a digital lux meter, a serial interface for connection to a PC, a power inlet for charging the battery. The unit can move vertically over the column and can be tilted for horizontal adjustment.

BaseThe base has 4 wheels and must be placed on guide rails so that it can be positioned easily and remains level.

ColumnThe column has a height indication for easy height adjustment of the optical unit. The column can rotate a little for aligning the optical unit to the vehicle.

VLT offers a range of the advanced Headlight Beam Testers. VLT’s development department was inspired years back by the non-availability of a product which could meet its high quality standard, resulting in the development of an own range of VLT Headlight Beam Testers. The market shows its interest in the developed VLT Headlight Beam Testers. All images shown below are of the VLT7457 MK2 model.

VLT 0938/MK2 Test Lane Version - Fully AutomatedHeadlight Beam Tester with VLT’s patent pending vehicle position scanner system. This model has a fully digital computerized controlled CCD camera, has the same fully automated vertical and horizontal movements, including automated searching of the hot spot of the beam, as the VLT 0936/MK2 model, but also scans the vehicle and measures the centre line of the vehicle and compensates automatically if the angle is not the same. This all at a speed of at least 5 times faster than manually operated testing systems.

19

PREMIER DIAGNOSTICS

The UK's leading range of Emissions Test Equipment

Premier Diagnostics Smoke meters

20

Premier DS2 XP Diesel Smokemeters

The unique DS2 XP Desktop & Roadside range of Cableless Smokemeter systems has been designed for the fleet operator, the mobile van service operator and roadside testing teams. Either working off a portable generator or 230Volt power inverter direct from the vehicle battery. (The inverter being optional).

It comes with a hand-held Tablet PC with Windows® embedded software which allows complete portability of operation within the car, bus or truck cab, combined with the latest Cableless Diesel D52 Smokehead & the PDCom EOBD – our new technology sensing module for rpm & oil temperature measurement.

Fast and easy to use test routines for increased productivityEOBD rpm & oil temperature module for cars & light vansBuilt in printerFully DVSA approved to Class 4, 5, 7.HGV, PSV, RPC, SVA & LFZ meeting all current specifications & all known future legislationThe Diesel D52 Smokehead incorporates automatic calibration with every test. No more filters to lose or breakThe Diesel D52 Smokehead will operate down to -l5c in all weathers with 100 metres range from its DS2 XP WorkstationDesigned to complement the modern MOT & ATF test station for now and the future

Premier Diagnostics Smoke meters

V L Test Roller Brake Tester

Tachograph Calibration Capability

Are you getting the most from your VLT commercial Vehicle Brake Tester?

Are you thinking about purchasing a new VLT Brake Tester?

Do you want to add Tachograph Calibration to your list of customer services?

Are you limited for space?

VLT & Phoenix Equipment have the answer………..

Adding this dual functionality to perform brake testing and tachograph calibration in a single bay cost effectively increases your income through utilisation of existing equipment

Partnering with Phoenix Equipment Ltd offers our customers the opportunity to benefit from market leading knowledge, support and expertise in Brake Tester Tachograph

Calibration technology

21

As the market leader in Brake Tester Tachograph calibration productsupplies, Phoenix Equipment offer a DVSA Approved TachographCalibration solution for your existing (or future) VLT Brake Tester

Add this dual functionality and perform brake testing and tachographcalibration in a single bay, cost effectively increasing your inclomethrough existing equipment

Using the latest wireless technology, you get precise measurements,quickly and easily every time.

VLT 5TH GENERATION

Designed with accuracy and ease of use in mind the integrated components use the latest technology to produce precise measurements every time

Modification of the existing roller assembly along with installation of a high resolution encoder & laser makes the process of tachograph calibration quick & easy

Quick Tachograph Calibration

Utilising the Phoenix wireless console a test typical takes less than 2 minutes to ascertain the W&L factors

Test is carried out in-cab utilising the wireless functionality of the tachograph programming tool and console

Phoenix Equipment are an all makes supplier to the tachograph industry with over 175 years combined experience.

This gives VLT the confidence to know that this partnership offers our customers the very highest

The concept is designed with ease of use in mind, utilising the latest wireless technology to provide precise measurements, quickly, easily and accurately every time.

To find out more please contact VLT on 01280822488 or contact Phoenix direct on 01382 849230

Alternatively you can visit the Phoenix website at www.phoneixequipmentltd.co.uk

22

•Au

tom

atic

and

inst

ant

•Im

prov

ed o

pera

tor s

afet

y•

An a

dditi

on to

our

pro

gram

MEC

HA

NIC

AL

SAFE

TY L

OCK

New

mod

el a

vaila

ble

Not

e:

Cann

ot b

e re

trofi

tted

AC Hydraulic Pit Jacks

SAFE

TY A

BO

VE A

LLPI

T JA

CKS

JACK

ING

BEA

MS

The

GD

-2 p

it ja

ck a

nd th

e FL

-2 ja

ckin

g be

am a

re b

oth

air

hydr

aulic

tw

in r

am u

nits

des

igne

d to

mee

t or

ex

ceed

all

safe

ty d

eman

ds. W

e ar

e ha

ppy

to in

form

yo

u th

at w

e no

w o

ffer

an a

utom

atic

mec

hani

cal

safe

ty l

ock

whi

ch o

ffers

im

prov

ed o

pera

tor

safe

ty

agai

nst u

nint

entio

nal l

ower

ing.

HEL

PIN

G Y

OU

GRO

WD

ue

to

high

sa

fety

st

anda

rds

the

two

mod

els

are

alre

ady

in h

igh

dem

and.

It

is o

ur h

ope

that

th

e ne

w

mec

hani

cal

safe

ty

lock

w

ill

incr

ease

yo

ur o

ppor

tuni

ties

in t

he m

arke

t ev

en m

ore

as it

im

prov

es b

oth

safe

ty a

nd e

ffici

ency

.

QU

ALIT

YTh

e de

sign

and

qua

lity

of o

ur p

it ja

cks

and

jack

ing

beam

s ar

e tr

uste

d by

mec

hani

cs w

orld

wid

e th

us

help

ing

you

to a

str

onge

r co

mpe

titiv

e ed

ge.

Fl-2

Air h

ydra

ulic

twin

ram

jack

ing

beam

GD

-2

Air h

ydra

ulic

twin

ram

pit

jack

AC Hydraulic Pit Jacks

24

25

VLT SPEEDOMETER TESTERS


Taximeter test (Test Lane Version) Speedometer test (Test Lane Version)

Speedometer test (Stand-alone Version)

Speed warning device test (Stand-alone Version)

Speed limiter test (Stand-alone Version)

VLT 3885/MK2 with console and 32”overhead monitor

VLT Speedometer testersVLT has a range of Speedometer Testers from 1000 kg, 3500 kg, 12000 kg up to 14000 kg, developed for intensive and heavy use in Automobile Test Stations. All models consist of 4 special coated rollers of which 2 rollers are connected by a propeller-shaft on which the electronic pulse counter is fitted. The signals are sent to the Speedometer controller.The results are displayed on a 22”TFT monitor. Speedometer Testers are available in TEST LANE or STAND-ALONE version.

The software is standard or tailor made. The VLT 3885 (the 3500 kg version) is available with a taximeter conversion. This means that in a taximeter configuration an electrical motor is driving the rollers, ensuring that the reading is very accurate (less sound and no Emissions). All four models are very robust and can be classified as top of the market, with high value for its price, fitted with a fast hydraulic lifting system which locks the rollers when the lift is up. The 14000 kg version has an independent roller braking system. A hydraulic lifting system is more expensive as the common pneumatic system, but more powerful and more reliable, especially with heavy use of the Speedometer. The Test Lane version has a drive-in sensor device for full automatic use and safety protection.

STAND-ALONE VERSIONTEST LANE VERSION

VLT 1885/MVLT 1885/M/TL

VLT 3885/MK2VLT 3885/MK2/TL



Max. testing speed standard 90 km/h 160 km/h 120 km/h 120 km/h

Max. testing speed 120 km/h 200 km/h 150 km/h 150 km/hMax. drive-over weight (axle) 2000 kg 5000 kg 14000 kg 18000 kg

Max. testing weight (axle) 1000 kg 3500 kg 12000 kg 14000 kgRoller dimensions 250 x 650 mm 238 x 860 mm 315 x 950 mm 400 x 1100 mmCentre-to-centre rollers 325 mm 375 mm 500 mm 630 mmMin. / max. testing width 600 x 1900 mm 880 x 2600 mm 800 x 2800 mm 800 x 3000 mmAll rollers raised by 40 mm 40 mm 40 mm 40 mmRoller set dimensions (w x l x d)

follow 725x3070x450 mm

930x4350x450 mm

1190x3484x640 mm

Hydr. pump unit 3x400 Volt 1.5 kW 3.0 kW 3.0 kW 3.0 kW

Approx. net weight follow 1240 kg 2225 kg 2985 kgMonitor version VLT 1885/M/22” VLT 3885/M/22”

TFT/CONVLT 12885/M/22” TFT/CON

VLT 14885/M/22” TFT/CON

Test lane version TFT-LCD monitor 32”Taximeter extension available only on VLT 3885/MK2 and VLT 3885/MK2/TL

TAXIMETER OPTION VLT VLT 3885/40 VLT 3885/60Electrical motor 400 Volt, 3 Ph 5.5 kW 7.5 kWTesting speed approx. 40 km/h 60 km/h

Speed adjustable by frequency converter

26

ALL NEW VLT CHASSIS DYNAMOMETERS FOR PERFORMANCE MEASUREMENT AND DIESEL SMOKE TESTING UNDER ROAD CONDITIONS (CDST).

VLT Chassis Dynamometers for Diesel Smoke Testing under Road Conditions (CDST).

Diesel Smoke Testing by Free Acceleration Test is one! But how accurate is this Test? We all know that it is a not valuable test, but still better as none testing of Vehicle Diesel Engines. The results are not realistic in many cases. And not as good for the Engine we know.

VLT knows that they are not the First Company to bring this kind of solution. But many of you know when VLT comes in the market it brings a High end solution!VLT offer you a range of three High Tec models, not less than that!

VLT offer our special Cars and Light Vehicles model VLT 038950 (not illustrated), a 6 Ton axle weight Medium Duty model VLT 068950, handling Light and Medium Vehicles, a 14 Ton axle weight Heavy Duty model VLT 148950, handling Light, medium and Heavy Vehicles and the top of our Range is a 24 Ton Dual Drive version model VLT 248950 for Tandem axle dual drive Vehicles, and handles at the same time Light and Medium Vehicles. This Special model comes with a NEW revolutionary VLT Concept (Patent pending).

All models are fully Computer Controlled VLT Solution for Diesel Smoke Testing under Road Conditions.

Revolutionary design of the all new VLT 248950 Chassis Dynamometer

Model VLT 038950 VLT 068950 VLT 148950 VLT 248950Maximum axle Load under test 3000 kg / 6600 lbs 6000 kg / 13200 lbs 14000 kg / 30800 lbs 24000 kg / 52800 lbsMaximum speed at axle load of 150 Km/hour at 3 ton 150 km/h at 6 ton 100 km/h at 14 ton 90 km/h at 24 tonMaximum speed at axle load of 175 Km/hour at 2 ton 175 km/h at 3 ton 120 km/h at 10 ton 100 km/h at 14 tonMaximum speed at axle load of 200 Km/hour at 1 ton 200 km/h at 2 ton 160 km/h at 6 ton 160 km/h at 6 tonNumber of rollers Four (4) four (4) four (4) six (6)Roller diameter x length 320 x 700 mm 400 x 900 mm 400 x 1100 mm 400 x 1100 mmVehicle axle lift capacity 4000 kg 7000 kg 16000 kg 16000 kg **Roller inner / Roller outside dimensions 800 / 2200 mm 700 / 2500 mm 800 / 3000 mm 800 / 3000 mmCentre to centre Rollers 500 mm 550 mm 630 mm 630 mmNumber of Eddy current brake(s) One (1) one (1) two (2) three (3)Maximum brake power 300 kW / 400 hp 300 kW / 400 hp 600 kW / 800 hp 750 kW / 1000 hpNumber of hold / drive out disc brakes four (4) four (4) six (6) eight (8)Hydraulic pump for lift and hold brakes 1,5 kW – 3 phase 3 kW - 3 phase 3 kW - 3 phase 3 kW - 3 phaseAdjustable tandem axle rollers for wheelbases Not applicable not applicable not applicable 1150 - 1550 mmAuxiliary cooling fan 380/400 Volt 3 phase ø500 mm – 0.25 kW * ø630 mm - 0.5 kW * ø630 mm - 0.5 kW * ø630 mm - 0.5 kW *Note * dual speed ** tandem second axle does not need a Lift.Optional subframe for casting into concrete VLT 03806/T2 VLT 06806/T2 VLT 14806/T2 VLT 24806/T2These subframes come with locking attachments to hold the vehicle in place during the test, ask for details.

Additional Technical information on 24 Ton Dual Drive Model VLT 248950:Suitable for the full Range of Vehicles (Excluding permanent four wheel drive Vehicles with wheelbase over 1550 mm)Designed for Heavy Vehicles 6x4, (6x6 if Front axle can be switched off) Heavy Vehicles and Buses 4x2.Also capable of testing CARS and Light Good Vehicles as well due to this Revolutionary design.Maximum Axle Load under Tandem axles: 24000 kg. Maximum Axle Load under Single axle: 14000 kg.


27

VLT has developed a series of Chassis Dynamometers for diesel smoke and other emissions under road conditions where more accurate results are measured as with the common free acceleration tests. Ready for nowadays discussed Partial Measurement Test. CDST tests are far more safe for the vehicle engine than the free acceleration tests.

VLT offer a series of four (4) models. We have 3000 kg and 6000 kg axle weight light versions and the 14000 kg axle weight single axle model and the double drive tandem axle 24.000 kg tandem axles model. This last

double drive tandem unit is revolutionary, unique in the industry. Due the VLT innovations you can test any car – light goods vehicle – buses – heavy goods vehicles single or double drive, on this tandem CDST. Same for the 14000 kg model all vehicles except double drive axles. Ask for more information at Van Leeuwen Test Systems B.V.

For All Wheel Drive cars we can offer VLT’s dual 3000 kg CDST Solution (consisting of two 3000 kg CDST’s controlled by VLT’s one Dual CDST Controller Console).

BA

C

øD

VLT 24806/T2

Model A B C DVLT 038950 800 2200 500 ø320VLT 068950 700 2500 550 ø400VLT 148950 800 3000 630 ø400VLT 248950 800 3000 630 ø400

Subframe for Model Nr.

VLT 038950 VLT 03806/T2VLT 068950 VLT 06806/T2VLT 148950 VLT 14806/T2VLT 248950 VLT 24806/T2

Subframes

VLT MOBILE INSPECTION STATIONVLT MOBILE INSPECTION STATION

28

29

A mobile Vehicle Inspection Station is an ideal solution for performing roadside inspections, or for use in remote locations that have no other vehicle inspection facilities (e.g. inspection station) nearby.

VLT’s Mobile Inspection Station is a fully equipped, fully integrated Test Lane on a semi-trailer. It is suitable for testing cars, vans, light goods vehicles, heavy goods vehicles, trailers and buses.

Features:- Play Detector- Side Slip Tester- Roller Brake Tester (16000 kg) with optional axle lift- Suspension Tester (with drive-over protection)- Speedometer Tester- Emission / Diesel Smoke Tester with Trolley- Headlight Beam Tester- Tablet for Visual Inspection, readout, instructions to the driver, remote control,etc.- Test Lane Computer with software- Power Generator- Office- All the above on a 2-axle semi-trailer with steered axles- Remote control unit for steering axles (for parking)

30

Technical Specifications VLT Mobile:Roller Brake Tester. Model VLT 16233/M5P/MobileMeasuring range .................. 0-8000-40000 Newton or 0-800-4000 KgfMax. axle weight with 50% braking .......................................... 16000 kgMax. drive over axle weight ...................................................... 20000 kgAxle 8 points weighing device ................................................... 18000 kgTesting speed ............................................................................ 2.6 km/hOptional testing speeds (VLT 14134) .................................2.6 / 5.2 km/hDimension of rollers .......................................................260 x 1100 mmCentre-to-centre rollers ............................................................ 470 mmAll rollers raised by ..................................................................... 40 mmMinimum -maximum testing width ............................... 800 – 3000 mmMotor Power (special motors) ....................... 2x 11 kW (11kW / 11kW)Optional on request: VLT 14135 Counter wise Rotating – VLT 14138 Roller Locking – VLT 16132 Two measuring directions.

Power Supply at 400 Volt 3 phases 50 Hz. from Gen Set or local supply .............................................63 Amps (60 Hz on request)Read out standard ......................................................... VLT Tough BookOr on request ................................Digital / Analogue Read out ConsoleRead-out Control unit: VLT Hand Held Tough Book tablet connected by Wireless LAN to Mobile Test Station Computer or Laptop / Notebook Computer under VLT Software program. For the Equipment installed in the Mobile Unit Optional Above and Undercarriage program available.

Optional Side Slip Tester Model VLT 3942/MobileLinear up to wheel load of. ......................................................... 6500 kgMaximum drive over weight (wheel) ........................................ 10000 kgDimension measuring plate ...........................................800 x 1000 mmDimension Compensation plate ........................................800 x 195 mmMeasuring range toe-in / toe out ............................... -20 / 0 / + 20 mm

Optional Suspension / Road Contact Tester Model VLT 3763/MOBILE with Protection platesMeasuring principle .................................................................. EUSAMAMeasuring frequency ................................................................25 – 0 HzVertical movement ..................................................................... 6.0 mmDimension measuring plates .............................................400 x 700 mm Max. axle weight test/drive over unprotected ...........2500 kg / 5000 kgDrive over weight when protection plates closed .................... 15000 kg

Optional Play Detector VLT 9052/MobileMaximum wheel weight / axle weight ........................ 10000 / 20000 kgMaximum movement total / each side .............................200 / 100 mmHorizontal force opposite / on each plate .........................60 kN / 30 kNElectro Pump Motor / hydraulic pressure ....................... 3 kW / 130 Bar

Optional Speedometer VLT 8885/12/MobileMaximum testing speed / short time ................... 125 km/h / 160 km/hMaximum testing weight .....................................................8000 kg axleMaximum drive over weight ..............................................15000 kg axleRoller dimensions ...........................................................238 x 1000 mmMinimum / Maximum testing width ...............................800 / 3000 mmAll roller raised by ....................................................................... 40 mmDrive out help / drive over ......................................hydraulic lift / lift up

Other optional equipment to Mobile Vehicle TesterVLT 4588/MK2/MOB .......................................................Emission Tester VLT 4590/MK2/MOB ................................................Diesel Smoke TesterVLT 0939/TL02RF/MOB ...................................... Manual Head Beam/RFVLT 0893 / VLT 0893/01 .............................................Sound Level Tester Other equipment like ................................... Tinted Glass Tester requestOptional second VLT Hand Held Tough Book ............................ including Software extension for Testing in 2 Stages on request.

VLT MOBILE VEHICLE TEST STATION WITH SAME PERFORMANCE AS EQUIPMENT IN YOUR VEHICLE STATION(S), WITHOUT COMPROMISES!

More about the Mobile Units; Semi Trailer Mobile Vehicle Test Centre or 20’ Container size solution itselfThe standard units comes with a Universal Roller Brake Tester suitable for testing 16 tons axle weights, testing up to 40.000 Newton (4000kgf) with a drive over axle weight of 20 tons, but the Brake Tester is suitable not only for Commercial Vehicles but for Cars and Light Goods Vehicles as well. The Roller Brake Tester can even be supplied with an axle lifting device for load simulation (This option is standard on the DROPS Truck system).Options for your Mobile Vehicle Test UnitsWe can offer the following additional equipment: Side Slip Testers – Wheel Play Detectors – Suspension Testers for Cars & Light Goods Vehicles (with protection plates when driving over with HGV’s) – Speedometer Tester with option for Taximeter testing.Even more options for your Mobile Test Units:Emission and Diesel Smoke Tester – Sound Meter – Headlight Beam Tester – Visual Vehicle Testing, above and below carriage Inspection by our VLT tough Book 10.4” Hand Held Touch screen tablet monitor directly connected by Wireless LAN to the VLT Test Lane computer (This tough book comes as standard with the Basic version of the Mobile units). Optional Read out version on request available.Power Requirements:The mobile units can be used by simply connecting up to a local supply of 380 / 400v 3phase E + N 50Hz supply (60Hz available on request) or you can order your Mobile Test Unit complete with our onboard Diesel GEN SET 70KVA. You can also use a combination of both for road side use if required.Read out & Control units of this unique VLT Mobile Vehicle Test StationThe standard unit is supplied with our newly developed VLT Tough Book Hand Held wireless LAN device. This unit has a 10.4” daylight readable touch screen monitor. The whole unit is Vibration and shock resistant with a magnesium alloy case weighing only 1.2kg. The battery life is 10 hours, but in high volume use we say 6 hours as average. The tough book is wireless connected to the Test Lane Computer installed in the office or a Laptop / Notebook with VLT Vehicle Test Software programmes. The VLT Tough Book will be in use with all test equipment fitted on or around the mobile unit the same as an entry console allowing: Vehicle & owner data – Visual inspection around the vehicle – Side slip test – Suspension test – Emission / Diesel smoke test – Sound meter test – Manual HBT Test – Speedo/ Taxi meter test when these items are installed. If you wish to speed up the testing process then two or three Tough Books can be supplied (at additional cost). Please see the pictures. If you as a customer would like to operate this unit as a standalone unit we can also offer a standard read out Console with Dials and LED display or 32”TFT/LCD Monitor.

Brake Test by Inspector and Vehicle Driver Brake Test by Inspector in Vehicle Steered rear axle, also with remote control

31

VEHICLE INSPECTION STATION

UNIQUE VLT FULLY INTEGRATED VEHICLE TEST LANE CONCEPT

Why unique?• The VLT Integrated Vehicle Test Lane works fully paperless• Has a Vehicle Tracking System, this means the System handles three or more Vehicles at the

same time in one lane and keeps the data and results of each Vehicle separate.• VLT makes use of one Single Test Lane Computer per Test Lane• Only one time Vehicle Data input, mostly only registration number is all you have to put in.

The remaining data is retrieved from the Station Server Database.• Unknown New Vehicles of the Database can be easily created by Menu on the Entry Console

and/or on Reception.• Pass or Fail decision is made by the Computer System, no human influence on vital

inspections, like Brakes, Suspension, etc. etc.• Very easy RETEST facilities, the VLT System knows the FAIL items of the previous inspection

and commands the Vehicle straight to the selected Equipment(s). Time saving for every one, Operator and Vehicle owner as well.

• If Vehicle FAILS, a Full Test Report is printed out and gives the repair workshop all relevantinformation for repair and/or adjustment.

• If Vehicle PASSES, a Vehicle Fitness Certificate can be printed, or if required a Window Sticker can be produced, or even your own special system can be adopted.

• VLT Develops, configures, manufactures, installs and hands over the entire Vehicle Testing System more or less as Turn-Key, including User and Maintenance training by VLT’s own engineers, even All-In Maintenance and Repair over 5 to 10 years period can be contracted out to VLT.

• VLT has its own Software Engineering Department for Machine controlling Embedded Software and its PC – Server application Software Development Department.

• Special Above- and Undercarriage inspection systems are developed by VLT, using special Membrane keyboards and/or Touch Screen Monitors.

• VLT makes your own ideas work! You tell us what you want, we make it. • VLT Test Lanes are known for extreme low maintenance and repair cost, this results in high

availability of your Test Lane to serve your customers.

CHASSIS DYNAMOMETER Tandem model

This model Chassis Dynamometer can test vehicles with a maximum axle weight of 14000 kg for a single axle. The combined weight of

a tandem axle set can be 24000 kg.

FREEROLLER SET

A Freeroller Set is used in combination with a Brake

Tester or a Speedometer Tester, for testing vehicles with driven tandem axles.A hydraulic lifting system and roller brakes are installed for easy driving in/out/over the rollersets.

ROLLER BRAKE TESTER

The Roller Brake Testers for heavy vehicles are

available with all rollers at the same level, or with the rear rollers raised. All rollersets are constructed for very intensive use and minimum required maintenance.

EMISSION and DIESEL SMOKE TESTERSVLT 4588/MK2 Emission Tester measures CO, HC, CO2, O2 and Lambda value.

The VLT 4590/MK3 Diesel Smoke Tester measures the opacity of the exhaust gases.Extra sensors, such as rpm sensor or oil temperature sensor, can be connected.Both units can be placed in a dedicated trolley.

ROLLER BRAKE TESTER

This Roller Brake Tester has motor driven rollers (integrated electric motor and gearbox). This results in a very compact rollerset. VLT uses the most accurate brake force strain gauges available on the market. The rollers are coated with an abrasive grit to emulate a road surface and last for many years.

CHASSIS DYNAMOMETER, light model

This model Chassis Dynamometer can test vehicles with a maximum axle weight of 6000 kg.

SUSPENSION TESTER

The VLT Suspension Testers operate according to the well-known EUSAMA principle. However, the diagnostic options are not restricted to the contents of this specification. In addition to the usual road contact values, the following values are also measured and displayed: the contact value difference, resonance frequency and wheel weight at minimum contact value, tyre pressure value, wheel weight and axle weight.

PRINTER CONSOLE(S)Still the fastest way in printing of the Test report and the fitness certificate at the Lane end. Test reports, are made fully in line with your wishes by data coming

from the Test Lane Computer. Alternative window stickers or similar items can be printed at this station.

VLT FULLY AUTOMATED TWO LANE VEHICLE STATION

INCLUDING TWO CDST’SEMISSION and DIESEL SMOKE TESTERS

PRINTER CONSOLE(S)Still the fastest way in printing of the Test report and the fitnesscertificate at the Lane end. Test reports, are made fully in linewith your wishes by data coming

from the Test Lane Computer. Alternative window stickers or similar items can beprinted at this station.

VLT FULLY AUTOMATED TWO LANE VEHICL

INCLUDING TWO CDST’S

32

SIDE SLIP TESTER

The VLT Side Slip Testers are very robust and require minimal maintenance. They can be equipped with drive-in and/or drive-out sensors to assist

the automatic vehicle tracking system in the test lane. An optional rigid counter plate guarantees a correct and accurate measurement. The maximum drive-over weight of the Sideslip Tester for heavy vehicles is 10000 kg each wheel.

HEADBEAM TESTER

Our VLT CCD camera Head Beam Tester is available from fully automated to manual. But all models send their data to the Test Lane Computer. The top model controls, by using a Vehicle Position Scanner, the Vehicle position in front off the Head Beam Tester. Ask for more information on the different models.

SIDE SLIP TESTER

The VLT Side Slip Testers are very robust and require minimal maintenance. They can be equipped with drive-in and/or drive-out sensors to assist the Automatic Vehicle Tracking System in the test lane. An optional rigid counter plate guarantees a correct and accurate measurement. The maximum drive-over weigh of the Sideslip Tester for light vehicles is 5000 kg each wheel.

TESTLANE ENTRY CONSOLE

The Test Lane Entry Console is the place to enter Vehicle date or select it from the Server and is the beginning of a Vehicle inspection. There is a choice of standard keyboard or a VLT membrane keyboard, both with mouse. The monitor can be standard or with Touchscreen. Above Carriage Inspection can be integrated in the Entry Console or can be set up by it’s own 86 keys special VLT keyboard (this still the fastest way of inspection).

CARS AND UNIVERSAL / HEAVY GOODS VEHICLE LANE WITH CDST TESTERS.

Stage 1 Entry Console for selecting from Vehicle Data of Server or creates new Vehicle.

Under Carriage Visual Inspection.

Play Detector (installed over inspection pit)

Stage 2 Above Carriage Visual Inspection.

Head Beam Tester

Stage 3 Alignment Test

Suspension Test (Road Condition Test) with Protection on Heavy Lane.

Roller Brake Tester (Including Applied electrical Hand brake Test at Light Lane.)

Stage 4 Chassis Dynamometer Light Vehicles with Option Speedometer/Taximeter

Chassis Dynamometer All kind of Vehicles with Option Speedometer/Taximeter

Diesel Smoke Testing on Chassis Dynamometer or Free Acceleration Test

Emission Test for Petrol Driven Vehicles and Alternatively Powered

Stage 5 Printing Test Report

Printing Fitness Certificate

PLAY DETECTOR

VLT Play Detectors are operated by means of a handheld lamp with built-in remote control unit. Different movements of the plates are available and can be selected and activated with the remote control.

LARGE OVERHEAD MONITORS 32”

Each test stage has a number of large overhead monitors for displaying instructions

for the driver, realtime measurement data and test results.

TER

eade

tos

he n

he

on

33

V L Test Systems Ltd

The Original and the Best Roller Brake Testers. Supplying Quality garage equipment for over 65 years

The name you can trust.Suppliers of:• Roller Brake Testers• Headlight Beam Testers• Wheel Play Detectors• Pit Jacks• Tachographs• Emission Testers• Test Lanes

What ever your business, weare here to support you.

Customer Feedback 2020 - Installation The VLT engineers were friendly, efficient and helpful and he couldn’t fault their work. VLT have given us advice and support through the entire process of building our new site. Brian Beacon has a wealth of knowledge and experience and he really held our hand throughout the build phase and in getting approval from the DVSA for our ATF lane and Tacho centre registration.

VLT came and understood what we needed to achieve and what our problems were before giving us some suitable options. I’d be happy to recommend VL Test in the future.

Customer 2 FeedbackJust a quick email to thank you for our recent installation of a new brake tester for depot.The entire process from start to finish was flawless and the guys who installed the new machine were efficient, well organised and professional. A credit to the business.I would also like to thank Adrian for pushing the sale and delivery through at a rapid rate, much appreciated.

34

VLT Comprehensive Service Coverage

Service Engineer, van and SparesHQ, Warehouse and Service Centre

35

V L Test Systems Ltd3-4 Middle Slade, Buckingham Industrial Park, Buckingham; MK18 1WA

United Kingdom01280 822488 [email protected] www.vltestuk.com

V L Test Systems Ltd. Buckingham United Kingdom

Adrian Young

Chris Manby

Brian BeaconDean Noctor Sales &

Installation Administrator

Sophie Beacon Sales Assistant

Tel 01280 822488 [email protected] www.vltestuk.com

Steve Stacey

Gerry McDonald

Documents

Product Catalogue 2021 - 2023 - VL Test UK