Upload
doankhuong
View
216
Download
1
Embed Size (px)
Citation preview
PRODUCT CATALOGUE 3.15
Innovative dental solutions
: Filling materials
: Bonding systems
: Desensitizer
: Cements
: Relining materials
That figures! TOKUYAMA – quality products from Japan
INNOVATIVE DENTAL SOLUTIONS
The parent company of TOKUYAMA
DENTAL, TOKUYAMA CORPORATION, now
looks back on over 90 years of successful
history as a diversified international che-
mical group. Over the years the product
portfolio has been expanded continuously
and it now contains a wide range of spe-
cial-purpose chemical products, including
product solutions for the dental market.
TOKUYAMA began developing and
manufacturing dental materials over 30
years ago. Our philosophy of developing
innovative dental solutions aims to make
an ongoing and sustainable contribution
towards offering top-quality products and
state-of-the-art solutions for dentistry.
Our always innovative technological
developments contribute to continuous
enhancement of the dental market. An
important acknowledgement of this was
currently experienced by our Research
& Development team in 2015. “DENTAL
ADVISOR”, the internationally recognised
organisation, honoured TOKUYAMA
DENTAL as the supplier of the best pro-
duct in three product categories.
TOKUYAMA DENTAL received an award
for the best composite, the best flowable
composite and the best soft relining
material. Our 7th generation self-etch
bonding agent and our desensitizer also
ranked among the main products that
won awards.
TOKUYAMA DENTAL products increase the
efficiency of dental work and
simultaneously allow optimal dental
solutions.
Japan – the land of the rising sun
TOKUYAMA Corporation
Research & Development Centre in Tsukuba
2
TOKUYAMA DENTAL Deutschland GmbH
has its head office in Altenberge, near
Münster. If you have any enquiries or
requests concerning products, that is
where you will receive personal and
professional advice.
TOKUYAMA DENTAL Deutschland GmbH, Altenberge
PRODUCTS
3
Filling materials
ESTELITE ASTERIA 6
ESTELITE COLOR 7
ESTELITE SIGMA QUICK 8
ESTELITE FLOW QUICK 10
ESTELITE FLOW QUICK HIGH FLOW 11
ESTELITE LV 12
ESTELITE POSTERIOR QUICK 12
Bonding systems
BOND FORCE II 13
EE-BOND & ETCHING GEL HV 14
ONE-UP BOND F PLUS 15
Desensitizer
SHIELD FORCE PLUS 16
Cements
ESTECEM 17
UNIVERSAL PRIMER 18
IONOTITE F 19
Relining materials
REBASE II FAST 20
SOFRELINER TOUGH M 21
SOFRELINER TOUGH S 21
SILICONE REMOVER 22
Accessories
PLT organiser 22
Syringe organiser 22
Light Initiation
RAP Initiator RAP Radical Monomer Polymer
CQ CQ Activating Energy
Light
Light
Light
Light
Light
Light
Light
Camphor-quinone
Light energy is an activator
Free radical
Amine
Monomer PolymerCamphor-quinone
CQActivatedstate
HH
Amine
CQ
Light
Light
ESTELITEThe development concept
A synthesis of aesthetics, reliability and user-friendliness
Production to perfection – ultrafine, spherical fillers
Controlled “QUICK” polymerisation – application to suit requirements
It was a well thought-out and innovative
development concept that brought about
the outstanding composite ESTELITE. Size
and shape-controlled spherical
sub-micron fillers, that are produced in
a delicate manufacturing process, are
setting new standards for aesthetic
composite restorations. Many years of
development preceding the
manufacturing process for fillers with
special aesthetic, physical and
user-friendly properties constitute the
basis of excellent results. An innovative
and controllable polymerisation process
makes ESTELITE easy to apply according to
the user's requirements.
10 seconds of polymerisation time
90 seconds of working time
20 – 30 seconds of polymerisation time
50 – 70 seconds of working time
Size and shape-controlled growth of fillers Uncontrolled grinding process for fillers
1µm
Filtek Supreme XT (3M Espe)
ESTELITE SIGMA QUICK (TOKUYAMA) Tetric EvoCeram (Ivoclar Vivadent)
1µm
1µm
Comparison of production methods: sol-gel method versus conventional grinding process
RAP technology (Radical Amplified Photopolymerisation)
Conventional polymerisation processRAP initiators allow rapid composite curing. Revolving use of CQ enables its reduction, increases the stability of the composite and reduces polymerisation stress.
Raw material
Growth of spherical fillers in the solution
Hydrogen (H) is a controller of Amine.
Without hydrogen (H) amine is activated
Conventional polymeri-sation initiator
When the light energy has been removed from the CQ, the CQ can be reused.If the CQ proportion were increased, the composite would polymerise more rapidly but under ambient light it would cure more rapidly and no longer be sculptable.
= curing= polymerisation
4
Mirror reflection
Lustre effect
Diffusion and transmission
Due to the identically shaped, spherical
sub-micron fillers, ESTELITE reflects light
uniformly – like a mirror. Whilst on rough
surfaces the light is scattered diffusely, on
smooth surfaces it is the law of reflection
that applies: angle of incidence equals
angle of reflection. ESTELITE thus ensures
an aesthetic appearance as in nature.
Smooth surfaces reflect light with equal
angles of incidence and reflection and create
a high degree of lustre. Rough surfaces, on
the other hand, reflect light in a
non-uniform manner and have a matt
visual appearance. The identically shaped
ESTELITE sub-micron fillers create an
extremely smooth surface.
The high diffusion and transmission of
ESTELITE ensure a uniform transition
(intergradation) between natural tooth
substance and composite. ESTELITE acts
like natural tooth enamel and ensures
excellent adaptation to the margin of the
restoration, even without bevels.
Conventional nano-hybrid fillersESTELITE SIGMA QUICK (TOKUYAMA)
ESTELITE SIGMA QUICK
(TOKUYAMA)
Filtek Supreme XT (3M Espe)
Tetric EvoCeram (Ivoclar Viva-
dent)
Venus Diamond (Heraeus Kulzer)ESTELITE SIGMA QUICK (TOKUYAMA) Filtek Supreme XT (3M Espe)
Laser pointer
Cured composite
Very different refractive index of
enamel and composite
Nano-hybrid composite ESTELITE
Virtually identical refractive index
of enamel and composite
Chameleon effect
Due to the intelligent combination of
shape and size-controlled fillers, ESTELITE
adapts to the tooth perfectly.
The resulting chameleon effect makes it
possible to cover the entire range
of shades with just four hues.
ESTELITEInc B1 A1 B2 D2 A2 C1 C2 D4 A3 B3 A3.5 B4 C3 A4 C4
A1
A2
A3
A3.5
Light Dark
Abrasion resistance ESTELITE SIGMA QUICK
(TOKUYAMA) before
the abrasion test.
ESTELITE SIGMA QUICK
(TOKUYAMA) after
50,000 load cycles.
Retention of
smoothness.
Filtek Supreme XT
(3M Espe) before
the test.
Filtek Supreme XT (3M
Espe) after 50,000
load cycles. Fillers that
have fallen out are
visible.
5µm
10µm 10µm
5µm
Uniform, small and spherical fillers in
ESTELITE offer a minimal area of abrasive
attack and produce a high level of
abrasion resistance.
The abrasion-resistant surface of ESTELITE
remains permanently smooth, so the lustre
of the restoration with ESTELITE is
permanent and does not have a matt
appearance.
The principle of aesthetics and reliability –ultrafine, spherical fillers
5
CR
Tooth
CR
Tooth
CR
Tooth
CR
Tooth
6
Filli
ng
mat
eria
ls ESTELITE ASTERIA High-end composite
: Anterior and posterior areas
: Composite veneers
: Diastema closure
: Composite/ceramic repair
: Perfect restorations using just
2 shade layers
: Unique chameleon effect
: Rapid curing in 10 seconds
: Extended working time of 90 seconds
: Very high lustre durability
: Abrasion resistance
: Low linear shrinkage
: Optimal handling
Indications Properties Clinical cases
Essential Kit Single syringe
Syringe Essential Kit: n7 syringes (4g each) in 7 shades
A1B, A2B, A3B, A3.5B, A4B, NE, OcEnClinical Guide
Refill:nSingle syringe (4g)
Custom Shade Selector for 15 shades
Pack sizes available
Class I
Outcome Outcome
Class IV
Available in 12 different shades
Dentine (7)
Enamel (5)
NE TE YE WE OcE
A1B A2B A3B A3.5B A4B B3B BL
7
Filli
ng
mat
eria
lsESTELITE COLOR Flowable composite for shade characterisation
????????????? Single syringe
: Custom shade characterisation of direct
and indirect resin restorations
: Masking of discoloured teeth
: 9 different shades
: 4 different opaquers
: Low viscosity
: Ideal supplement for ESTELITE ASTERIA
Indications Properties
Color Kit
Color Kit:n13 single syringes (0.9 g each) in 13 shades:
blue, grey, lavender, ochre, dark brown, white, yellow, clear, red, pink
opaque, low chroma opaque, medium chroma opaque, high chroma opaque
Pack sizes available
Refill: nSingle syringe (0.9 g)
Brush No. 24:nPack of 5
With the aid of the double-ended brush the stains can be applied
accurately and as required.
Available in 13 different shades
Standard (9)
Opaque (4)
clear white blue yellow grey ochre red lavender dark brown
pink high medium low chroma chroma chroma
ESTELITE SIGMA QUICK
: Anterior and posterior areas
: Composite veneers
: Diastema closure
: Composite/ceramic repair
Syringe Kit of 3:n3 single syringes (3.8g each) in shades
A2, A3, OA3
Syringe Kit of 6:n6 syringes (3.8g each) in 6 shades
A2, A3, OA1, OA2, OA3, OPA2
Syringe Intro Kit:n6 syringes (3.8g) in 6 shades
A1, A2, A3, A3.5, OA2, OPA2n1 x 1ml BOND FORCE II with
25 x microbrushes and 1 x mixing dishn1 shade selector with 20 shades
Syringe System Kit: n6 syringes (3.8g each) in 6 shades
A1, A2, A3, A3.5, OA3, OPA2n3 single syringes (1.8g each) ESTELITE
FLOW QUICK in shades A2, A3, OA3 n27 applicator tipsn1 x 5ml BOND FORCE II with
50 x microbrushes and 1 x mixing dish n1 shade selector with 20 shades
Refill: nSingle syringe (3.8g)
Capsule Intro Kit:n 40 capsules (0.2g each) in 6 shades
5 x A1, 10 x A2, 10 x A3, 5 x A3.5,
5 x OA3, 5 x OPA2n 1 x 1ml BOND FORCE II with
25 x microbrushes and 1 x mixing dish,
1 shade selector with 20 shades
Refill: n20 capsules (0.2g each)
Shade Selector with 20 shades
: Unique chameleon effect
: Rapid curing in 10 seconds
: Extended working time of 90 seconds
: High lustre durability
: Abrasion resistance
: Low linear shrinkage
: Optimal handling
Physical
properties
Flexural strength 115 MPa
Flexural modulus 8.7 GPa
Compressive
strength 400 MPa
Source: TOKUYAMA
DENTAL R&D
Indications
Pack sizes available
Properties Technical information
Universal composite
Filli
ng
mat
eria
ls
Tetric EvoCeram (Ivoclar Vivadent)
ESTELITE SIGMA QUICK (TOKUYAMA)
Scanning electron microscope images of the fillers
1µm
1µm
Syringe Kit of 3 System Kit
8
Filli
ng
mat
eria
ls
Available in 20 different shades
Abrasion test [mm3]Abrasion test with antagonists [µm] Lustre [%]Shrinkage [%]
ESTELITE SIGMA QUICK
Venus
Premise
Tetric EvoCeram
Supreme XT
Esthet-X
0 1.0 3.02.00 0.04 0.06 0.08 0.10 0.120.020 6.00 10.00 14.002.00 0 40 60 80 10020
Excellent radiopacity of ESTELITE SIGMA QUICK
Very user-
friendly –
the material
does not stick to
the instrument
Source: TOKUYAMA DENTAL R&D
Single syringe Capsules
9
Standard (14)
BleachOpalescentOpaque
(2)(3)(1)
B1 B2 B4 C1B3 C2 C3
BW WE OA2OA1 OA3 OPA2
A1 A2 A3 A3.5 CE(Inc.)A4 A5
10
Filli
ng
mat
eria
ls ESTELITE FLOW QUICK
: Anterior and posterior areas
: Cavity liner
: Blocking out undercuts
: Composite/ceramic repair
Syringe Kit of 3:n3 single syringes (1.8g each) in 3
shades
A2, A3, A3.5
Refill:nSingle syringe (1.8g)nSingle L-syringe (3.6g)
Refill: n20 capsules (0.2g each)
: Choice of two viscosities
: Rapid curing in 10 seconds
: Extended working time of 90 seconds
: High lustre durability
: Low shrinkage
: Excellent polishability
Indications
Pack sizes available
Properties Technical information
Flowable composite – perfect aesthetics
Filli
ng
mat
eria
ls
CE(Inc.) A1 A2 A3 A3.5
B1 B2 B3 B4
C1 C2 C3 BWOA1 OA2 OA3
A4(Cerv.)
Syringe Kit of 3 Capsules
Physical properties
Flexural strength 156 MPa
Flexural modulus 8.5 GPa
Compressive strength 391 MPaSource: TOKUYAMA
DENTAL R&D
Available in 17 different shades
11
ESTELITE FLOW QUICK HIGH FLOW
Refill:nSingle syringe (3.6g)
Refill: n20 capsules (0.2g each)
Pack sizes available
Flowable composites
A1 A2 A3 OPA2A1 A2 A3 A3.5
nur Mediumflow
Single syringe Capsules
: Anterior and posterior areas
: Cavity liner
: Blocking out undercuts
: Composite/ceramic repair
: Choice of two viscosities
: Rapid curing in 10 seconds
: Extended working time of 90 seconds
: High lustre durability
: Low shrinkage
: Excellent polishability
Indications Properties Technical information
Physical properties
Flexural strength 160 MPa
Flexural modulus 9.6 GPa
Compressive strength 458 MPaSource: TOKUYAMA
DENTAL R&D
Filli
ng
mat
eria
ls
Available in 4 different shades
SHIELD FORCE SHIELD FORCE
Siti conem facepra eceatias sam num,
elessit, volor arioriatio estium velectas
eostiatibus.
Ovit, ipsam ius aligent uriorio cumque
odist, quam vit et landebit eicilibus et
quat ut fugia nonemporatem venimusa
pro cor sequod es nonsequamus namusda
eceatem harum qui discime turio. Borro et
labor mod quam fuga. Itae doluptatur, in
cus mos sament modi as et, cum dolore,
nonserrovid maion re aute eossero vide-
bitet expla volland itaquam usdanditius
moluptatur?
Siti conem facepra eceatias sam num,
elessit, volor arioriatio estium velectas
eostiatibus.
Ovit, ipsam ius aligent uriorio cumque
odist, quam vit et landebit eicilibus et
quat ut fugia nonemporatem venimusa
pro cor sequod es nonsequamus namusda
eceatem harum qui discime turio. Borro et
labor mod quam fuga. Itae doluptatur, in
cus mos sament modi as et, cum dolore,
nonserrovid maion re aute eossero vide-
bitet expla volland itaquam usdanditius
moluptatur?
Siti conem facepra
eceatias sam num,
elessit, volor arioriatio
estium velectas eos-
tiatibus.
Ovit, ipsam ius aligent
uriorio cumque odist,
quam vit et landebit
eicilibus et quat ut
fugia nonemporatem
venimusa pro cor se-
quod es nonsequamus
namusda eceatem
harum qui discime
turio. Borro et labor
mod quam fuga. Itae
doluptatur, in cus
mos sament modi
as et, cum dolore,
nonserrovid maion re
aute eossero videbitet
expla volland itaquam
usdanditius molup-
tatur?
Siti conem facepra
eceatias sam num,
elessit, volor arioriatio
estium velectas eos-
tiatibus.
Ovit, ipsam ius aligent
uriorio cumque odist,
quam vit et landebit
eicilibus et quat ut
fugia nonemporatem
venimusa pro cor se-
quod es nonsequamus
namusda eceatem
harum qui discime
turio. Borro et labor
mod quam fuga. Itae
doluptatur, in cus
mos sament modi
as et, cum dolore,
nonserrovid maion re
aute eossero videbitet
expla volland itaquam
usdanditius molup-
tatur?
Indikationen Indikationen
Eigenschaften Eigenschaften
Lichthärtende, fließfähige Komposite mit 3 Viskositäten
Lichthärtende, fließfähige Komposite mit 3 Viskositäten
vit
et la
nde
12
Pack sizes available Pack sizes available
ESTELITE POSTERIOR QUICK
Refill:nSingle syringe (4.2g)
: Posterior area
: Composite/ceramic repair
Indications
: Unique chameleon effect
: High physical properties
: Rapid curing in 10 seconds
: Optimal handling
: Low linear shrinkage
: High radiopacity
Properties
Posterior composite
A1 A2 A3 CE
Single syringe
Technical information
Physical properties
Flexural strength 209 MPa
Flexural modulus 20.2 GPa
Compressive strength 443 MPaSource: TOKUYAMA
DENTAL R&D
Single syringes
ESTELITE LV
Flowable composite
ESTELITE LV High Flow:
: Small cavities, extended fissure sealing, cavity liner
ESTELITE LV Medium Flow:
: All fields of application for flow composites
ESTELITE LV Low Flow:
: Class V cavities, small cavities in classes I, II, III
Refill:nHigh Flow single syringe (3g) nMedium Flow single syringe (3g)nLow Flow single syringe (3g)
: Choice of three viscosities
: Chameleon effect
: Excellent polishability
: High lustre durability
: Low shrinkage
: Easy handling
Indications
Properties
Highflow Mediumflow Lowflow
Filli
ng
mat
eria
lsFi
llin
g m
ater
ials
Available in 3 different shades Available in 4 different shades
A1 A2 A3 OPA2A1 A2 A3 A3.5
only Mediumflow
SHIELD FORCE
Siti conem facepra eceatias sam num,
elessit, volor arioriatio estium velectas
eostiatibus.
Ovit, ipsam ius aligent uriorio cumque
odist, quam vit et landebit eicilibus et
quat ut fugia nonemporatem venimusa
pro cor sequod es nonsequamus namusda
eceatem harum qui discime turio. Borro et
labor mod quam fuga. Itae doluptatur, in
cus mos sament modi as et, cum dolore,
nonserrovid maion re aute eossero vide-
bitet expla volland itaquam usdanditius
moluptatur?
13
Siti conem facepra eceatias sam num,
elessit, volor arioriatio estium velectas
eostiatibus.
Ovit, ipsam ius aligent uriorio cumque
odist, quam vit et landebit eicilibus et
quat ut fugia nonemporatem venimusa
pro cor sequod es nonsequamus namusda
eceatem harum qui discime turio. Borro et
labor mod quam fuga. Itae doluptatur, in
cus mos sament modi as et, cum dolore,
nonserrovid maion re aute eossero vide-
bitet expla volland itaquam usdanditius
moluptatur?
Siti conem facepra eceatias sam num,
elessit, volor arioriatio estium velectas
eostiatibus.
Ovit, ipsam ius aligent uriorio cumque
odist, quam vit et landebit eicilibus et
quat ut fugia nonemporatem venimusa
pro cor sequod es nonsequamus namusda
eceatem harum qui discime turio. Borro et
labor mod quam fuga. Itae doluptatur, in
cus mos sament modi as et, cum dolore,
nonserrovid maion re aute eossero vide-
bitet expla volland itaquam usdanditius
moluptatur?
Siti conem facepra eceatias
sam num, elessit, volor
arioriatio estium velectas
eostiatibus.
Ovit, ipsam ius aligent urio-
rio cumque odist, quam vit
et landebit eicilibus et quat
ut fugia nonemporatem
venimusa pro cor sequod
es nonsequamus namusda
eceatem harum qui discime
turio. Borro et labor mod
quam fuga. Itae doluptatur,
in cus mos sament modi as
et, cum dolore, nonserrovid
maion re aute eossero vide-
bitet expla volland itaquam
usdanditius moluptatur?
Indikationen Eigenschaften Technische Informationen
Lichthärtende, fließfähige Komposite mit 3 Viskositäten
vit
et la
nde
Bon
din
g sy
stem
s
Posterior composite
Pack sizes available
BOND FORCE II
: Light-curing, self-etching
single-component adhesive
: Adheres to prepared and
unprepared enamel/dentine
: Repair material for ceramics
and composite
Complete Bottle Kit:n1 x 5ml bottlen25 x microbrushesn1 x mixing dish
Refill:n1 x 5ml bottle
Pen Intro Kit:n1 x 2ml penn25 x microbrushesn1 x mixing dish
Refill:n2 x 2ml pen
Unit Dose Standard Kit:n50 x 0,1ml Unit Dosen50 x microbrushes
: Excellent bond strength
: Ultra-rapid, just 25 seconds
: No etching, no irrigation, no mixing
: Fluoride-releasing
: Pleasantly thin, uniform film layer
: Optimal distribution in stepped cavities
: Perfect marginal integrity
: Unique adhesion due to innovative,
self-reinforcing 3D monomer (3D SR)
: No storing in a fridge
Pen properties: Over 33% saving on material
: Fill level indicator
:Uniform dosage with a click
Unit Dose properties: Particularly hygienic
Micro tensile
strength test
(After 3.000 thermal
cycles)
Indications Properties Technical information
Clinical use
Light-curing, self-etching single-component adhesive
Application 10 sec. Drying 5 sec. Curing 10 sec.
Apply BOND FORCE II 5 sec. gentle air-drying Light-curing
Bottle Refill, Pen, Unit DoseComplete Bottle Kit
Source: TOKUYAMA
DENTAL R&D
0
15
5
20
10
25
30
[MPa]
Enamel
Dentin
Beauti Bond Multi
AdheSE One
Xeno VScotch-bond Uni-
versal
Optibond All in One
G-aenial Bond
Clearfil Bond
SE One
BOND FORCE II
NEW!NEW!
SHIELD FORCE
Siti conem facepra eceatias sam num,
elessit, volor arioriatio estium velectas
eostiatibus.
Ovit, ipsam ius aligent uriorio cumque
odist, quam vit et landebit eicilibus et
quat ut fugia nonemporatem venimusa
pro cor sequod es nonsequamus namusda
eceatem harum qui discime turio. Borro et
labor mod quam fuga. Itae doluptatur, in
cus mos sament modi as et, cum dolore,
nonserrovid maion re aute eossero vide-
bitet expla volland itaquam usdanditius
moluptatur?
14
Siti conem facepra eceatias sam num,
elessit, volor arioriatio estium velectas
eostiatibus.
Ovit, ipsam ius aligent uriorio cumque
odist, quam vit et landebit eicilibus et
quat ut fugia nonemporatem venimusa
pro cor sequod es nonsequamus namusda
eceatem harum qui discime turio. Borro et
labor mod quam fuga. Itae doluptatur, in
cus mos sament modi as et, cum dolore,
nonserrovid maion re aute eossero vide-
bitet expla volland itaquam usdanditius
moluptatur?
Siti conem facepra eceatias sam num,
elessit, volor arioriatio estium velectas
eostiatibus.
Ovit, ipsam ius aligent uriorio cumque
odist, quam vit et landebit eicilibus et
quat ut fugia nonemporatem venimusa
pro cor sequod es nonsequamus namusda
eceatem harum qui discime turio. Borro et
labor mod quam fuga. Itae doluptatur, in
cus mos sament modi as et, cum dolore,
nonserrovid maion re aute eossero vide-
bitet expla volland itaquam usdanditius
moluptatur?
Siti conem facepra eceatias
sam num, elessit, volor
arioriatio estium velectas
eostiatibus.
Ovit, ipsam ius aligent urio-
rio cumque odist, quam vit
et landebit eicilibus et quat
ut fugia nonemporatem
venimusa pro cor sequod
es nonsequamus namusda
eceatem harum qui discime
turio. Borro et labor mod
quam fuga. Itae doluptatur,
in cus mos sament modi as
et, cum dolore, nonserrovid
maion re aute eossero vide-
bitet expla volland itaquam
usdanditius moluptatur?
Indikationen Eigenschaften Technische Informationen
Lichthärtende, fließfähige Komposite mit 3 ViskositätenB
ondi
ng
syst
ems
EE-BOND & ETCHING GEL HVSpecial bonding system for selective enamel etching
Source: TOKUYAMA
DENTAL R&D
Unprepared enamel
Dentine
Unprepared enamel (after TC)
Dentine(after TC)
0 030 3010 1040 4020 2050 50 60
TOKUYAMA EE-BondOptiBond® Solo PlusAdper™ Scotchbond XT XP Bond®
ExciTE® F Syntac®
Technical information
Clinical use Etching and irrigation 10 sec.
Air-drying and bonding >10 sec.
Air-drying and light-curing 20 sec.
Apply ETCHING GEL HV and air dry. Then apply EE-BOND and rinse off. Finally, air dry and then light-cure.
Intro Kit Etching Gel HV
: Light-curing, self-etching single-com-
ponent adhesive with high-viscosity
etching gel for etching the enamel
: Adheres to prepared and unprepared
enamel/dentine
: Repair material for ceramics and
composite
: Extremely high bond strength
: Perfect marginal integrity
: Unique adhesion due to innovative,
self-reinforcing 3D monomer (3D SR)
: Short treatment time due to easy
handling
: Little technique sensitivity
: Fluoride-releasing
: Avoidance of post-operative sensitivity
Indications Properties
Pack sizes available
Intro Kit:n1 x 5ml bottlen1 x 2.5ml syringe of ETCHING GEL HVn25 x microbrushesn1 xmixing dishn10 x applicator tips (superfine)
Refill:n1 x 5ml bottle n2 x 2.5ml syringe of ETCHING GEL HVn50 x applicator tips (superfine)
ETC
HIN
G
GEL
HV
ETC
HIN
G
GEL
HV
Optimised etching gelThe high-viscosity etching
gel can be applied to
exactly the right spot using
the superfine applicator
tips.
Micro tensile strength
before and after thermal
cycling test [MPa]
SHIELD FORCE
Siti conem facepra eceatias sam num,
elessit, volor arioriatio estium velectas
eostiatibus.
Ovit, ipsam ius aligent uriorio cumque
odist, quam vit et landebit eicilibus et
quat ut fugia nonemporatem venimusa
pro cor sequod es nonsequamus namusda
eceatem harum qui discime turio. Borro et
labor mod quam fuga. Itae doluptatur, in
cus mos sament modi as et, cum dolore,
nonserrovid maion re aute eossero vide-
bitet expla volland itaquam usdanditius
moluptatur?
15
Siti conem facepra eceatias sam num,
elessit, volor arioriatio estium velectas
eostiatibus.
Ovit, ipsam ius aligent uriorio cumque
odist, quam vit et landebit eicilibus et
quat ut fugia nonemporatem venimusa
pro cor sequod es nonsequamus namusda
eceatem harum qui discime turio. Borro et
labor mod quam fuga. Itae doluptatur, in
cus mos sament modi as et, cum dolore,
nonserrovid maion re aute eossero vide-
bitet expla volland itaquam usdanditius
moluptatur?
Siti conem facepra eceatias sam num,
elessit, volor arioriatio estium velectas
eostiatibus.
Ovit, ipsam ius aligent uriorio cumque
odist, quam vit et landebit eicilibus et
quat ut fugia nonemporatem venimusa
pro cor sequod es nonsequamus namusda
eceatem harum qui discime turio. Borro et
labor mod quam fuga. Itae doluptatur, in
cus mos sament modi as et, cum dolore,
nonserrovid maion re aute eossero vide-
bitet expla volland itaquam usdanditius
moluptatur?
Siti conem facepra eceatias
sam num, elessit, volor
arioriatio estium velectas
eostiatibus.
Ovit, ipsam ius aligent urio-
rio cumque odist, quam vit
et landebit eicilibus et quat
ut fugia nonemporatem
venimusa pro cor sequod
es nonsequamus namusda
eceatem harum qui discime
turio. Borro et labor mod
quam fuga. Itae doluptatur,
in cus mos sament modi as
et, cum dolore, nonserrovid
maion re aute eossero vide-
bitet expla volland itaquam
usdanditius moluptatur?
Indikationen Eigenschaften Technische Informationen
Lichthärtende, fließfähige Komposite mit 3 Viskositäten
vit
et la
nde
Bon
din
g sy
stem
s
Pack sizes available
ONE-UP BOND F PLUS
: Light-curing adhesive with visual
support for composite fillings
: Can be used for all cavity classes
Complete Kit:n2 x 5ml bottlenQuick’n Easy BoxnMixing dishn50 applicator tips incl. holdernMixing dish
Refill:nFluid A (5ml)nFluid B (5ml)
: Error minimisation due to visual control
: Much shorter treatment time due to
easy handling
: Secure adhesion due to extremely
reliable bond strength
: Fluoride-releasing
: No etching, no irrigation or drying
: Quick’n Easy Box – user-friendly
handling
Very high bond strength - no matter
whether the adhesive layers are thick or
thin. The thickness of the adhesive layer
varies depending on the morphology of
the cavity. The monomer penetrates deep
into the tooth substance, demineralises
it and establishes a firm bond with the
tooth.
Initial bond strength
Enamel 20.7 MPa
Dentine 24.2 MPa
Thermal cycling test
Enamel 21.1 MPa
Dentine 23.6 MPa
Source: TOKUYAMA
DENTAL R&D
Indications Properties Technical information
Light-curing, self-etching adhesive with visual support
5 sec. Mixing
A+B Bonding agent
At least
10 sec. Apply and
rub in
10 sec. Light-curing
Clinical use
Complete Kit
Thin layer
Thick layer
Des
ensi
tize
r
16
SHIELD FORCE PLUS
: Treatment of hypersensitive dentine
: Reduction of abrasion and erosion
of exposed cervical dentine
: Alleviation and/or prevention of tooth
sensitivity following tooth preparation
for direct or indirect restorations.
Complete Kit:n1 x 3mlbottlen25 x microbrushesn1 x mixing dish
Refill:n1 x 3mlbottle
: Rapid and effective treatment
of hypersensitive dentine
: Excellent sealing effect
: Long-lasting protective layer
: Easy handling
: Thin film layer
Indications
Pack sizes available
Properties Technical information
Protective sealant for hypersensitive dentine
SHIELD FORCE PLUS
forms compact resin
villi in the dentinal
tubules (1000x
magnification).
Ca2+
Ca2+
Ca2+
Ca
Ca
Ca
Ca
Ca
Ca2+
Ca2+
TOKUYAMA SHIELD FORCE PLUS reduces dentinal hypersensitivity immediately after applying, by utilizing
Tokuyama's patented technology "Self Reinforcing Monomer (SR Monomer)" it interacts with the calcium ions
sealing the dentinal tubules. The air drying step ensures the formation of a thin protective resin layer over the
dentin surface and resin tags in the tubules, the �nal light curing step polymerizes them to solidify.
Applying TOKUYAMA SHIELD FORCE PLUS in�ltrates and seals exposed dentinal tubules inhibiting the �ow of �uid through the tubules which is the cause of sensitivity.
Dentin hypersensitivity is widely said to be caused by rapid �uid movement in the dentinal tubules.
Mechanism of Hypersensitive Dentin
Sealing tubules with TOKUYAMA SHIELD FORCE PLUS
Q uick and E�ective Treatment of Hypersensitive DentinQ uick and E�ective Treatment of Hypersensitive Dentin
SEM image - Magx1000** In-house data, R&D, Tokuyama Dental Corporation.Note: This is a test model demonstrating hypersensitive dentin, using an extracted human tooth ground on the surface to expose the dentinal tubules.
Sealed with resin tags and layers
Firmly formed resin tags in dentinal tubules.
Ca2+
Ca2+
Ca2+
Ca2+
Ca2+
Ca
Ca
Ca Ca
Ca
Ca2+
Ca2+
Ca2+
Ca
Ca
Ca
Ca
Ca
Ca2+
Ca2+Ca2+
Ca2+
Ca2+
Ca2+
Ca
Ca
Ca Ca
Ca
Ca2+
Fluid
SHIELD FORCE PLUS Air-drying Light-curing
Nerve
Dentine
Mechanism –
hypersensitive
dentine
Clinical use
1
* If using a total etch bonding system, etchant must be applied "AFTER" TOKUYAMA SHIELD FORCE PLUS procedure.
Adhesive treatment Composite resin filling
** BEFORE taking impression, it is essential to wipe dentin surface with alcohol, removing unpolymerized layer of TOKUYAMA SHIELD FORCE PLUS that could prevent an accurate impression.
*** Do NOT use temporary resin-based material, it may adhere to the cured TOKUYAMA SHIELD FORCE PLUS. The use of water-based cement would be recommended for temporary cementing, and temporary stopping would be recommended for temporary filling.
Impression Temporary filling / cementing application Permanent Restoration
2 3 4
1 2 3 4
1 2 3 54**
Dispensing
5 seconds of light air-drying and 5 seconds of intensive air-drying
Light cure for 10 seconds
1
* If using a total etch bonding system, etchant must be applied "AFTER" TOKUYAMA SHIELD FORCE PLUS procedure.
Adhesive treatment Composite resin filling
** BEFORE taking impression, it is essential to wipe dentin surface with alcohol, removing unpolymerized layer of TOKUYAMA SHIELD FORCE PLUS that could prevent an accurate impression.
*** Do NOT use temporary resin-based material, it may adhere to the cured TOKUYAMA SHIELD FORCE PLUS. The use of water-based cement would be recommended for temporary cementing, and temporary stopping would be recommended for temporary filling.
Impression Temporary filling / cementing application Permanent Restoration
2 3 4
1 2 3 4
1 2 3 54**
10 sec.
1
* If using a total etch bonding system, etchant must be applied "AFTER" TOKUYAMA SHIELD FORCE PLUS procedure.
Adhesive treatment Composite resin filling
** BEFORE taking impression, it is essential to wipe dentin surface with alcohol, removing unpolymerized layer of TOKUYAMA SHIELD FORCE PLUS that could prevent an accurate impression.
*** Do NOT use temporary resin-based material, it may adhere to the cured TOKUYAMA SHIELD FORCE PLUS. The use of water-based cement would be recommended for temporary cementing, and temporary stopping would be recommended for temporary filling.
Impression Temporary filling / cementing application Permanent Restoration
2 3 4
1 2 3 4
1 2 3 54**
10 sec.
1
* If using a total etch bonding system, etchant must be applied "AFTER" TOKUYAMA SHIELD FORCE PLUS procedure.
Adhesive treatment Composite resin filling
** BEFORE taking impression, it is essential to wipe dentin surface with alcohol, removing unpolymerized layer of TOKUYAMA SHIELD FORCE PLUS that could prevent an accurate impression.
*** Do NOT use temporary resin-based material, it may adhere to the cured TOKUYAMA SHIELD FORCE PLUS. The use of water-based cement would be recommended for temporary cementing, and temporary stopping would be recommended for temporary filling.
Impression Temporary filling / cementing application Permanent Restoration
2 3 4
1 2 3 4
1 2 3 54**
10 sec.
Complete Kit
Source: TOKUYAMA
DENTAL R&D
Apply and wait 10 seconds
17
Cem
entsESTECEM
Complete Kit (Universal only):nPaste Universal (9.4g)nEstelink Bond A (3ml)nEstelink Bond B (3ml)nUniversal Primer A (1ml)nUniversal Primer B (1ml)n1 x mixing dishn25 x microbrushesn10 x applicator tips
Pack sizes available
Dual-curing luting cement
Complete Kit
: Cementation of crowns, bridges,
inlays, and onlays made of glass/oxide
ceramics (porcelain, zirconia and
alumina), metals/alloys (precious
and non-precious) and resin materials
including inorganic filler (composite
materials).
: Repair of fractured porcelain fused
to metal crowns and all ceramic
restorations
: Cementation of veneers
: Cementation of adhesion bridges
: Cementation of metal or resin cores,
metal or glass-fiber posts
: Reliable bond strength to tooth
structure and prothesis
: Excellent physical properties and high
wear resistance
: Low water absorption and low solubility
: Thin film thickness
: Outstanding esthetics and color stability
: Good radiopacity
: Simple handling and easy removal of
excess material
Indications Properties Technical information
Physical properties
Tensile bond strength enamel 33,1 MPa
Tensile bond strength dentine 29,2 GPa
Flexural strength 158 MPa
Film thickness 8 μm
Solubility 0,0 μg /mm3
Water absorption 12,0 μg /mm3Source: TOKUYAMA
DENTAL R&D
Refill:nPaste Universal (9.4g)nPaste Brown (9.4g)nPaste Clear (9.4g)nPaste White-Opaque (9.4g)nEstelink Kit (3ml Bond A + Bond B each)nEstelink Bond A (3ml)nEstelink Bond B (3ml)nUniversal Primer Kit
(2ml Primer A + Primer B each)nUniversal Primer A (2ml)nUniversal Primer B (2ml)n40 x applicator tips
Clear Universal Brown White-Opaque
Available in 4 shades
NEW!
Cem
ents
18
UNIVERSAL PRIMER
Complete Kit:nUniversal Primer A + Primer B (2ml each)
Refill:nUniversal Primer A (2ml)nUniversal Primer B (2ml)
Pack sizes available
Primer for adhesive bonding of prosthetic materials
: Pretreatment of glass/oxide ceramics
(porcelain, zirconia and alumina), metals/
alloys (precious and non-precious) and resin
materials including inorganic filler (composite
materials) in preparation for bonding with
polymerizable resin materials, such as:
1) Bonding of inlays, onlays, crowns, bridges,
veneers, cores, artificial teeth, orthodontic
brackets etc.
2) Repair of ceramic, metal and composite
materials (including porcelain fused metals).
3) Bonding of denture resin to metal base,
clasp or attachment
4) Repair of denture with metal base, clasp or
attachment
5) Bonding of opaque resin to a metal base in
the fabrication of resin-faced stainless steel
crowns
: Easy of use
: Reliable bond strength to a wide
variety of prosthetic materials
: Low technique sensitivity
: Economical due to its versatility
Indications Properties
RefillComplete Kit
NEW!NEW!
Technical information
Physical properties
Precious metal 23,0 MPa
Non-precious metal 23,8 MPa
Glass ceramics 33,5 MPa
Resin composite 21,8 MPa
Oxide ceramics 25,1 MPaSource: TOKUYAMA
DENTAL R&D
Range of indications
Fiber post Resin core Indirect resin composite
CAD / CAMMetal based denture
PFM Metal crown ZirconiaMetal core Laminate veneer
Tensile bond strength [MPa]
19
Cem
entsIONOTITE F
Complete Kit:nPowder (20g)nFluid (6.4ml)n1 x powder measuring scoopn1 x mixing pad
Refill:nPowder (20g)nFluid (6.4ml)
Pack sizes available
Self-adhesive composite ionomer luting cement system
Complete Kit
Mixing Complete curing
Start 1 minute 2 minutes 3 minutes 4 minutes 5 minutes 6 minutes
IONOTITE FKetac Cem*
Precious metal alloy
without TC without TCwith TC with TC
Non-precious metal alloy
Removal of excess material
Source: Extract from
a study conducted
by the University
of Ulm,
Prof. Haller
: Cementation of porcelain bonded to
metal (PBM) crowns and bridges
: Cementation of cast crowns and bridges
with acrylic facings
: Cementation of inlays, onlays, crowns
and bridges made of metal
: Cementation of cast posts and cores
: Very high level of adhesion to all
metals
: No etching, bonding or priming
required
: Long-term resistance to water and
saliva
: Long-lasting release of fluoride ions
: Thin film thickness
Indications Properties Treatment time
Tensile stress
Tooth enamel 12.0 MPa
Dentine 8.7 MPa
Precious metal 18.0 MPaSource: TOKUYAMA
DENTAL R&D
Technical information
0
10
20
30
40
50
60
20
Relin
ing
mat
eria
ls REBASE II FAST
: Long-lasting, hard relining material
: Relining complete dentures
: Relining partial dentures
: Following soft relining, when
the mucosa has healed
: Chairside use
Complete Kit: nPowder (80g)nLiquid (50ml)nAdhesive (15ml)nMeasuring cup, pipette, mixing crucible,
spatula, plastic cup, brushnHardener (48g) and scoop
Refill: nPowder (80g)nLiquid (50ml)nAdhesive (15ml)nHardener (48g)
: MMA-free
: No development of odour
: Excellent precision fit / optimal
comfort
: Minimal generation of heat
: Time-saving
: Reduces laboratory costs
1. Check
precision fit
3. Application
of adhesive
5. Inserting the
prosthesis
7. Working
on the
prosthesis
9. Finishing
and
polishing
2. Prepare the
prosthesis
4. Dispensing,
mixing and
applying
Rebase II
6. Articulation
motions
8. To increase the
hardness: soak
in Tokuso Resin
Hardener
10. Check
precision fit
Indications
Pack sizes available
Properties Clinical use
Hard relining material chairside method
14
PRODUCTS PACKAGES AVAILABLE
Kit (Normal or Fast): Powder (80g), Liquid (50mL), Adhesive (15mL), Measuring cup, Dropper, Rubber cup, Spatula, 2 Plastic cups, Brush, TOKUSO RESIN HARDNER II, Spoon
Powder Normal/Fast (80g), Liquid Normal/Fast (50mL), Adhesive (15mL), TOKUSO RESIN HARDNER II (48g)
STANDARD HANDLING TIME
14
PRODUCTS PACKAGES AVAILABLE
Kit (Normal or Fast): Powder (80g), Liquid (50mL), Adhesive (15mL), Measuring cup, Dropper, Rubber cup, Spatula, 2 Plastic cups, Brush, TOKUSO RESIN HARDNER II, Spoon
Powder Normal/Fast (80g), Liquid Normal/Fast (50mL), Adhesive (15mL), TOKUSO RESIN HARDNER II (48g)
STANDARD HANDLING TIME
14
PRODUCTS PACKAGES AVAILABLE
Kit (Normal or Fast): Powder (80g), Liquid (50mL), Adhesive (15mL), Measuring cup, Dropper, Rubber cup, Spatula, 2 Plastic cups, Brush, TOKUSO RESIN HARDNER II, Spoon
Powder Normal/Fast (80g), Liquid Normal/Fast (50mL), Adhesive (15mL), TOKUSO RESIN HARDNER II (48g)
STANDARD HANDLING TIME
14
PRODUCTS PACKAGES AVAILABLE
Kit (Normal or Fast): Powder (80g), Liquid (50mL), Adhesive (15mL), Measuring cup, Dropper, Rubber cup, Spatula, 2 Plastic cups, Brush, TOKUSO RESIN HARDNER II, Spoon
Powder Normal/Fast (80g), Liquid Normal/Fast (50mL), Adhesive (15mL), TOKUSO RESIN HARDNER II (48g)
STANDARD HANDLING TIME
14
PRODUCTS PACKAGES AVAILABLE
Kit (Normal or Fast): Powder (80g), Liquid (50mL), Adhesive (15mL), Measuring cup, Dropper, Rubber cup, Spatula, 2 Plastic cups, Brush, TOKUSO RESIN HARDNER II, Spoon
Powder Normal/Fast (80g), Liquid Normal/Fast (50mL), Adhesive (15mL), TOKUSO RESIN HARDNER II (48g)
STANDARD HANDLING TIME
14
PRODUCTS PACKAGES AVAILABLE
Kit (Normal or Fast): Powder (80g), Liquid (50mL), Adhesive (15mL), Measuring cup, Dropper, Rubber cup, Spatula, 2 Plastic cups, Brush, TOKUSO RESIN HARDNER II, Spoon
Powder Normal/Fast (80g), Liquid Normal/Fast (50mL), Adhesive (15mL), TOKUSO RESIN HARDNER II (48g)
STANDARD HANDLING TIME
14
PRODUCTS PACKAGES AVAILABLE
Kit (Normal or Fast): Powder (80g), Liquid (50mL), Adhesive (15mL), Measuring cup, Dropper, Rubber cup, Spatula, 2 Plastic cups, Brush, TOKUSO RESIN HARDNER II, Spoon
Powder Normal/Fast (80g), Liquid Normal/Fast (50mL), Adhesive (15mL), TOKUSO RESIN HARDNER II (48g)
STANDARD HANDLING TIME
14
PRODUCTS PACKAGES AVAILABLE
Kit (Normal or Fast): Powder (80g), Liquid (50mL), Adhesive (15mL), Measuring cup, Dropper, Rubber cup, Spatula, 2 Plastic cups, Brush, TOKUSO RESIN HARDNER II, Spoon
Powder Normal/Fast (80g), Liquid Normal/Fast (50mL), Adhesive (15mL), TOKUSO RESIN HARDNER II (48g)
STANDARD HANDLING TIME
14
PRODUCTS PACKAGES AVAILABLE
Kit (Normal or Fast): Powder (80g), Liquid (50mL), Adhesive (15mL), Measuring cup, Dropper, Rubber cup, Spatula, 2 Plastic cups, Brush, TOKUSO RESIN HARDNER II, Spoon
Powder Normal/Fast (80g), Liquid Normal/Fast (50mL), Adhesive (15mL), TOKUSO RESIN HARDNER II (48g)
STANDARD HANDLING TIME
14
PRODUCTS PACKAGES AVAILABLE
Kit (Normal or Fast): Powder (80g), Liquid (50mL), Adhesive (15mL), Measuring cup, Dropper, Rubber cup, Spatula, 2 Plastic cups, Brush, TOKUSO RESIN HARDNER II, Spoon
Powder Normal/Fast (80g), Liquid Normal/Fast (50mL), Adhesive (15mL), TOKUSO RESIN HARDNER II (48g)
STANDARD HANDLING TIMETreatment time
Application Intraoral curingDip in the hardener to harden
Remove excesses and perform articulation motions
Remove excesses extraorally
Finishing and polishing
Mixing
Extraoral
Extraoral or intraoral
Intraoral
0 1 2 3 4 5 6 7 8 9 min.
Complete Kit
21
Relin
ing
mat
eria
lsSOFRELINER TOUGH M(MEDIUM) & S(SOFT)
: Pain caused by sharp ridges of alveolar
bone and atrophy of mucosa
: Poor retention caused by extreme ridge
atrophy
: Major undercuts or maxillary/
mandibular tori
: Retention of over dentures before the final
attachment is placed
: Temporary relining or tissue
conditioning (TOUGH S only)
Complete Kit Medium: nCartridge (2 x 27g)nPrimer (10ml)n10 x mixing tips XS nPolishing system
Refill: nCartridge (2 x 27g)nPrimer (10ml) nMixing tips XS or S, 50 pcs. each nPolishing system nDispensing gun
Complete Kit Soft:nCartridge (2 x 26g)nPrimer (10ml) n10 x mixing tips XS nPolishing system
Refill:nCartridge (2 x 26g) nPrimer (10ml)nMixing tip XS or S, 50 pcs. each nPolishing systemnDispensing gun
: 100% addition-cured silicone
: Shore hardness 43 (M) / 24 (S)
: Shelf life 2½ years (M) / 1/2 year (S)
: Extreme tear resistance
: Surface and shade stability
: Excellent precision fit
Tensile stress test
Indications
Pack sizes available
Properties Clinical use
Addition-cured silicone based soft relining material
0
05
10
15
20
01 02 03 04 05 06 07
25
Hard
High SOFRELINER TOUGH
Conventional siliconematerials GC Reline Extra Soft 10.0 37
GC Reline Soft 9.0 55
SOFRELINER S 4.0 23
GC Reline Ultra Soft 4.0 25
Tear Shore resistance A
(10.5,24)
SOFRELINER TOUGH S 10.5 24
SOFRELINER TOUGH M 22.5 43
(22.5,43)
Low
Soft
1. Bevelling
the edges
2. Application
of the
primer
4. Finishing the
prosthesis
3. Apply SOFRELINER
TOUGH
5. After 2 years use
Complete M Kit Complete S Kit
SOFRELINER TOUGH M
(Shore A:43)
SOFRELINER TOUGH S
(Shore A:24)
Before
Shore hardness comparison test 10 kg 10 kg10 kg 10 kg10 kg 10 kg10 kg 10 kg10 kg 10 kg10 kg 10 kg10kg 10kg
22
Acc
esso
ries
SILICONE REMOVER ORGANISER
: For removing elastic relining material,
silicone-based
: For removing soft silicone impression
materials
: Syringe organiser provides space for a total of 13 syringes
: PLT organiser provides space for a total of 20 different PLT packs,
ESTELITE SIGMA QUICK, ESTELITE FLOW QUICK and ESTELITE FLOW
QUICK HIGH FLOW
n1 x 7ml bottle nPLT organisernSyringe organiser
: Easy handling
: Removes soft relining materials from
the prosthesis in seconds without
leaving any residues
: No painstaking removal of old material
by grinding is required
: Syringe organiser and PLT organiser –
standing upright for quick access
: Syringe organiser autoclavable
: Practical
: Space-saving
: Clearly arranged
: Time-saving
: Efficient
Indications Indications
Pack sizes available Pack sizes available
Properties Properties
Remover of soft relining material For PLTs and syringes
Bottle Syringe and PLT organiser
Relin
ing
mat
eria
ls
232323
YOUR ORDER
+49 (0)2505 938513 +49 (0)2505 938515
Your customer number (if any)
Date Signature
Practice stamp
No delivery charge will be made for a order amount of at least €100. If the net order amount is below €100, we make a nominal delivery charge of €5. By signing, I recognise Tokuyama's Conditions of Sale 01/2001.
www.tokuyama-dental.de [email protected]
Invoicing depot
Contact person
Email address
Article name Pack size Order quantity Sales unit
Filling materials
ESTELITE ASTERIA
ESTELITE COLOR
ESTELITE SIGMA QUICK
ESTELITE POSTERIOR QUICK
ESTELITE FLOW QUICK
ESTELITE FLOW QUICK HIGH FLOW
ESTELITE LV
Bonding systems
BOND FORCE II
EE-BOND & ETCHING GEL HV
ONE-UP BOND F PLUS
Desensitizer
SHIELD FORCE PLUS
Cements
ESTECEM
UNIVERSAL PRIMER
IONOTITE F
Relining materials
REBASE II FAST
SOFRELINER TOUGH M
SOFRELINER TOUGH S
SILICONE REMOVER
Accessories
Syringe organiser
PLT organiser
Net amount
plus VAT
Total amount
Tokuyama Dental Deutschland GmbH
Siemensstrasse 46 l 48341 Altenberge l Germany
Tel.: +49 (0)2505 938513 l Fax: +49 (0)2505 938515
www.tokuyama-dental.de l [email protected]
Edit
ion
03-2
015
Manufacturer