PRODUCT CATALOGUE - Аквахолдингaqua-holding.com/files/dl_button_files/2015_06_09_its_water_cataloge... · metals and non-ionic surfactants Alkaline based reagent with addition

1

Innovative Water Treatment Solutions

PRODUCT CATALOGUE

3

COnTEnT

InTRODUCTIOn 5

1 Open cooling systems 71.1 Alkaline complex reagents for inhibition of corrosion and scaling 81.2 Alkaline complex reagents with addition of sodium bromide for inhibition of

corrosion and scaling8

1.3 Biocides based on inorganic and organic chlorine 91.4 Multicomponent systems for biocide treatment by chlorine dioxide 101.5 Biocides based on inorganic and organic bromine 111.6 Peracetic acid based biocides 111.7 Hydrogen peroxide based biocides 111.8 Non-oxidizing and oxidixing biocides 111.9 Dispersants 12

1.10 Defoaming reagents 12

2 Closed cooling systems 132.1 Complex reagents based on organic compounds 142.2 Oxygen scavengers 142.3 Biocides 142.4 Antiscalants and dispersants 152.5 Antifreeze agents 15

3 Boiler water treatment 173.1 Complex reagents based on organic compounds 183.2 Tannin based reagents 183.3 Oxygen scavengers 193.4 Reagents for water treatment and steam line pH correction 193.5 Sludge conditioners 193.6 Reagents for removal of deposits 20

4 Membrane systems 214.1 Antiscalants 224.2 Biocides 224.3 Cleaners 22

5 Ancillary Reagents 235.1 Aluminium based coagulants 235.2 Iron based coagulants 235.3 Chemical for correctional water treatment 235.4 Stabilization treatment for water supply lines 235.5 Drainage systems treatment 245.6 Reagent for water tracing 24

6 Engineering 25

7 Contacts 28

5

InTRODUCTIOn

COAGULAnT Pology Chemical Plant ALC is a Ukraine-based chemical enterprise engaged in development and industrial adaptation of modern technologies in the field of water and wastewater treatment using reagents of its own production.

The company also provides a full range of special purpose chemical products used in the process of thickening and dewatering of sludge, in treatment of industrial circulating water in open and closed cooling systems etc.

Reagents of our production are used in various industries: food, chemical, metallurgical, oil and petrochemical, pulp and paper, as well as in municipal water treatment and purification of domestic wastewater.

In 2014 COAGULAnT launched production of Reagents for Special Water Use under the ITS WATER trademark (license from FEEDWATER LTD., UK). These reagents are specifically designed for reliable and trouble-free operation of the following system types:

•Coolingsystems(closedandopentype); •Waterheatingsystemsandboilerequipment; •Systemsofmembranetechnologies.

ITS WATER™ reagents are manufactured in accordance with TECHNICAL SPECIFICTIONS (UKRAINE) 20.5-03327724-011:2014, TECHNICAL SPECIFICTIONS (UKRAINE) 20.5-03327724-012:2014, and have endorsement from the State Sanitary and Epidemiological Expertise of The Ministry of Healthcare of Ukraine.

7

1 OPEn COOLInG SySTEMS

One of the applications of the ITS WATER™ reagents is to ensure the efficient and uninterrupted operation of circulating cooling systems.

Circulating water supply is the most advanced and cost-effective method of water supply to enterprises, which helps to maximize the preservation of natural water resources.

Organizationofthecirculatingopen-typecoolingsystemimpliesuseofheatexchangeequipmentwith the replenishment of the evaporated water volume from an external source.

Typical problems that arise during operation of open cooling systems are corrosion, fouling and scale formations which occur in heat exchange and pipeline systems.

To ensure the efficient and uninterruptedoperationof equipment in open cooling systems it isrecommended to use ITS WATER™ chemical reagents which maintain a stable water chemistry regime, namely non-oxidizing and oxidizing biocides, anti-foaming agents and complex chemicals based on organic compounds.

8

1.1 Alkaline complex reagents for inhibition of corrosion and scaling

Regent Main components Reagent description

Reagent concentration

in system, cm3/m3

Reagent pH

Density, g/cm3

CG-709Phosphonates, polyacrylates and phosphon carboxylates of alkali metals

Alkaline based reagent with the addition of corrosion inhibitor and scale dispersant. Most effective when combined with biocides. Provides protection of systems made of different metals.

100.0 ÷ 300.0 13.0 ± 0.5 1.11 ± 0.05

CG-710 1Phosphonates and polyacrylates of alkali metals

Alkaline based reagent with the addition of scale and corrosion inhibitors. Used in combination with biocides. Provides protection of systems made of different metals.

100.0 mg/dm3 12.0 ± 0.5 1.12 ± 0.05

CG-715Phosphon carboxylates, pyrophosphates and polyacrylates of alkali metals

Alkaline based reagent with the addition of phosphates. Used as corrosion inhibitor and scale dispersant. Provides protection of systems made of different metals.

100.0 ÷ 200.0 mg/dm3 11.5 ± 0.5 1.29 ± 0.05

CG-717 1,2Phosphonates, polyacrylates of alkali metals and zinc oxide

Alkaline based reagent with the addition of organic and inorganic inhibitors of scale and corrosion.

100.0

> 13.0

1.28 ± 0.05

CG-720 1,2Phosphonates, pyrophos-phates, polyacrylates and silicates of alkali metals


100.0 1.34 ± 0.05

CG-722 1,2Phosphonates and polyacrylates of alkali metals


100.0 1.25 ± 0.05

CG-725 1Phosphonates and polyacrylates of alkali metals

Alkaline based reagent with the addition of corrosion inhibitor. Provides protection of systems made of different metals.

50.0

> 12.0

1.24 ± 0.05

CG-730 1Phosphonates, polyacrylates and molybdates of alkali metals

Alkaline based reagent with additional molyb-dates of alkali metals. Used in soft or softened water. Provides protection of systems made of different metals.

100.0 1.24 ± 0.05

TT-899 Tolyltriazole

Is used as an auxiliary corrosion inhibitor. In combination with other inhibitors effectively prevents corrosion of steel, aluminium and copper.

The dosage of the reagent to be calculated individually 3

1.07 ± 0.05

1Appliedatdifferentratesofwaterqualityandoperatingconditions,namelyinawidetemperatureandpHrange;2 Minimum Reagent concentration, cm3/m3;3 Varies depending on the application.

1.2 Alkaline complex reagents with addition of sodium bromide for inhibition of corrosion and scaling

Reagent Main components Reagent description


in system, mg/dm3

Reagent pH

Density, g/cm3

BG-742 1Pyrophosphates of alkali metals and non-ionic surfactants

Alkaline based reagent with addition of non-ionic surfactants and sodium bromide. Used as corrosion and scale inhibitor. Provides protection of systems made of different metals.

200.0 ÷ 300.0 11.5 ± 0.5 1.21 ± 0.05

BG-744 1Phosphonates, polyacrylates of alkali metals and zinc oxide

Alkaline based reagent with addition of organic and non-organic corrosion and scale inhibitors, as well as sodium bromide. Can be applied in wide range of temperature and pH values.

200.0 ÷ 300.0 > 13.0 1.21 ± 0.05

BG-746 1Pyrophosphates, Phosphonates, polyacrylates and silicates of alkali metals

Alkaline based reagent with addition of organic and non-organic corrosion and scale inhibitors. Does not contain heavy metal salts. Can be applied in wide range of temperature and pH values.

200.0 ÷ 300.0 > 12.5 1.20 ± 0.05

BG-747 1Phosphonates and polyacrylates of alkali metals, non-ionic surfactants

Alkaline based reagent with addition of corrosion and scale inhibitor as well as sodium bromide. Prevents the formation of mineral deposits. Can be applied in wide range of temperature and pH values.

100.0 ÷ 200.0 12.0 ± 0.5 1.21 ± 0.05

BG-737 1Phosphon carboxylates, polyacrylates of alkali metals, non-ionic surfactants

Alkaline based reagent with addition of non-ionic surfactants and sodium bromide. Used as corrosion, scale inhibitor and dispersant. Provides protection of systems made of different metals.

100.0 ÷ 200.0 > 12.0 1.22 ± 0.05

99



in system, mg/dm3

Reagent pH

Density, g/cm3

BG-750 1Phosphonates and polyacrylates of alkali metals

Alkaline based reagent with addition of sodium bromide, corrosion and scale inhibitors. Prevents the formation of mineral deposits. Can be applied in wide range of temperature and pH values. Provides protection of systems made of different metals.

300.0 ÷ 500.0 11.5 ± 0.5 1.07 ± 0.05

BG-740 1Polyacrylates and phosphon carboxylates of alkali metals

Alkaline based reagent with addition of sodium bromide. Used as corrosion inhibitor and scale dispersant. Provides protection of systems made of different metals.

50.0 ÷ 100.0 > 12.0 1.35 ± 0.05

ECB-484 2Sodium hypochlorite and polyphosphates of alkali metals Reagents for reaction initiation of active bromine

formation.

The dosage of the reagent to be calculated

individually

12.5 ± 0.5 1.08 ± 0.05

BGA-404 2 Sodium hypochlorite 13.0 ± 0.5 1.19 ± 0.05

BGA-666 2Sodium hypochlorite and polyacrylates of alkali metals 12.0 ± 0.5 1.25 ± 0.05

1UsedincombinationwithBGAandECBreagentseries;2 Used in combination with BG reagent group.

1.3 Biocides based on inorganic and organic chlorine

Reagent Main components Reagent descriptionBasic substance concentration, as active Сl2, %

Reagent pH

Density, g/cm3

AX-620 Sodium hypochlorite

Reagent for disinfection of potable and household water. Prevents biofouling of cooling system’s main technological equipmentsurfaces. Can be used for removal of odour, dissolved iron, manganese and sulphides.

5.0 > 13.0 1.08 ± 0.05

ECD-644Sodium hypochlorite and polyphosphates of alkali metals

Stabilized sodium hypochlorite reagent for disinfection of potable and household water. 5.0 12.5 ± 0.5 1.08 ± 0.05

TCH-474Sodium hypochlorite and phosphon carboxylates of alkali metals Reagent based on stabilized sodium hypochlorite,

intended to prevent biological growth in open cooling systems (cooling towers).

5.0 12.5 ± 0.5 1.08 ± 0.05

FCB-480Sodium hypochlorite and polyphosphates of alkali metals

10.0 13.0 ± 0.5 1.18 ± 0.05

BCT-410Sodium dichloroisocyanurate (SDIC)

SDIC based reagent. Used for biocidal surface treatmentofequipmentandfightingbiofoulingin cooling systems.

60.0 1.5 ± 0.5 (1% soln.) tablets

BC-444Trichloroisocyanuric acid (TCCA)

TCCA based reagent. Due to its low solubility in water, the reagent is suitable for use in systems requiringpermanentcontentoffreechlorineat0.5% level.

90.0 (The dosage of the reagent to be cal-culated individually for each separate

system)

1.5 ± 0.5 (1% soln.) tablets

PCH-499Dichloroisocyanuric acid sodium salt (NaDCC)

NADCC based reagent. Used for biocidal surface treatmentofequipmentandpreventsbiofoulingin cooling systems.

60.0 (The dosage of the reagent to be cal-culated individually for each separate

system)

1.5 ± 0.5 (1% soln.) granules

DCH-010 Sodium thiosulfateReagent for removing excess chlorine from waste water after disinfection. – 10.0 ± 0.5 1.30 ± 0.05

10

1.4 Multicomponent systems for biocide treatment by chlorine dioxide

Reagent Main components Reagent descriptionReagent

concentration in system

Reagent pH

Density, g/cm3

AX-690 1Chlorite and Sodium hypochlorite

Reagent based on chlorite-hypochlorite solution. Is a component of chlorine dioxide synthesis. Intended for use with reagents-activators AXD-629 and AXD-630. 500.0 ml/m3

AX-690 combined with 500.0 ml/m3 AXD-629 or

AXD-630

11.5 ± 0.5 1.00 ± 0.05

AXD-629Hydrochloric acid

Hydrochloric acid based reagent-activator for initiating the reaction of chlorine dioxide synthesis. Intended for use with AX-690.

< 1.0

1.10 ± 0.05

AXD-630Orthophosphoric acid

Orthophosphoric acid based reagent for initiating reaction of chlorine dioxide synthesis. Intended for use with AX-690.

1.20 ± 0.05


Reagent based on chlorite-hypochlorite solution. Is a component of chlorine dioxide production. Intended for use with reagents-activators AVD-667 and AVD-670.

100.0 ml/m3 AX-677

combined with 100.0 ml/m3

AVD-667

13.0 ± 0.5 1.03 ± 0.05

AX-655 1Reagent based on chlorite-hypochlorite solution. Is a component of chlorine dioxide synthesis. Intended for use with reagents-activators AXD-656.

500.0 ml/m3 AX-655


AXD-656

11.5 ± 0.5 1.00 ± 0.05

AXD-656Orthophosphoric acid

Orthophosphoric acid based reagent based for initiating the reaction of chlorine dioxide synthesis. Intended for use with AX-655.

< 1.0 1.01 ± 0.05

AX-660 1 Sodium ChloriteReagent based on chlorite-hypochlorite solution. Is a component of chlorine dioxide synthesis. Intended for use with reagents-activators AX-662 and AXD-640.

20.0 ml/m3 AXD-660


AX-662 and 20.0 ml/m3

AXD-640

> 12.0 1.022 ± 0.05

AX-662 1Sodium hypochlorite and polyphosphates of alkali metals

Reagent based on chlorite-hypochlorite solution with addition of polyphosphates of alkali metals. Is a reactant for chlorine dioxide synthesis. Intended for use with reagents-activators AX-660 and AXD-640.

12.5 ± 0.5 1.04 ± 0.05

AXD-640Hydrochloric and Orthophosphoric acid

Hydrochloric and Orthophosphoric acid mixture based reagent-activator for initiating the reaction of chlorine dioxide synthesis. Intended for use with reagents AX-660 and AX-662.

0.6 ± 0.1 1.02 ± 0.05

AXD-633Organic fatty acids

Organic fatty acids mixture based reagent-activator for initiating the reaction of chlorine dioxide synthesis. Intended for use with reagent AX-636.

1.0 ml/dm3 AXD-633

combined with 1.0 ml/dm3

AX-636

< 1.0 1.15-1.20


Reagent based on chlorite-hypochlorite solution. Is a component of chlorine dioxide synthesis. Intended for use with reagent-activators AXD-633.

11.5 ± 0.5 1.00 ± 0.05

AX-680 1Reagent based on chlorite-hypochlorite solution. Is a component of chlorine dioxide synthesis. Intended for use with reagents-activators AVD-667 and AVD-670.

50.0 ml/m3 AX-680 (AX-685) combined with

50.0 ml/m3 AVD-667

> 13.0

1.07 ± 0.05

AX-685 1

Sodium Chlorite

Reagent based on sodium chlorite solution. Is a component of chlorine dioxide synthesis. Intended for use with reagents-activators AVD-667 and AVD-670.

1.07 ± 0.05

AX-688 1Reagent based on sodium chlorite solution. Is a component of chlorine dioxide synthesis. Intended for use with reagents-activators AVD-667 and AVD-670.

11.0 ml/m3 AX-688

combined with 11.0 ml/m3 AVD-667

> 12.0 1.10 ± 0.05

AVD-667 Hydrochloric acid, Orthophosphoric acid

Reagent-activator based on hydrochloric and ortho-phosphoric acid for initiating the reaction of chlorine dioxide synthesis. Intended for use with reagents of AX series.

Dosed at a volume ratio

of 1 : 1 with reagents of AX series

0.6 ± 0.05 1.01 ± 0.05

AVD-670 2 < 2.0 1.041 ± 0.05

HAD-606Hydrochloric acid

Reagent-activator based on hydrochloric and ortho-phosphoric acid for initiating the reaction of chlorine dioxide synthesis. Intended for use with SC-610.

Dosed at a volume ratio of

1: 1 with SC-610 reagent

< 1.0 1.05 ± 0.05

SC-610 1 Sodium ChloriteReagent based on sodium chlorite solution. Is a component of chlorine dioxide synthesis. Intended for use with reagent-activator HAD-606.

> 12.0 1.06 ± 0.05

AX-650 1

Chlorite and Sodium hypochlorite, Orthophosphoric acid

Multicomponent reagent for biocidal treatment by chlorine dioxide.

5 ml/dm3 equivalentto

1 mg/dm3 ClO25.0 ÷ 9.0 1.09 ± 0.05

1 The use of chlorine dioxide helps to prevent the formation and emergence of a number of dangerous toxic organochlorine compounds in water (trihalomethanes, chlorophenols, etc.), to oxidize humic acids, eradicate bacterial and viral contaminations, to exterminate algae, biofilms, chlorophyll, surfactants,andimprovetheorganolepticcharacteristicsofwaterduetoitsstrongdeodorizingeffect;2 Designed specifically for food industry.

1111

1.5 Biocides based on inorganic and organic bromine


concentration in system, g/m3

Reagent pH

Density, g/cm3

BCT-4201-bromo-3-chloro-5,5-dimethylhydantoin

Reagent based on chlorobromoderivative heterocyclic compounds. Does not cause adaptation of micro-organisms.

5.0 ÷ 10.0 1.5 ± 0.5 (1% soln.) tablets

FB-699Sodium bromide and Non-ionic surfactants

Reagent based on water solution of sodium bromide with addition of non-ionic surfactants. Is a component of hypobromous acid synthesis. Intended for use with reagent-activator FCD-696. Effective at low concentrations.

The dosage of the reagent

to be calculated individually

for each separate system

5.0 ÷ 9.0 1.14 ± 0.05

FCD-696Sodium hypochlorite and polyphosphates of alkali metals

Reagent based on sodium hypochlorite and poly-phosphates of alkali metals. It is used to initiate the reaction of hypobromous acid synthesis. Is intended for use with FB-699.

13.0 ± 0.5 1.18 ± 0.05

1.6 Peracetic acid based biocides



in system, mg/dm3

Reagent pH

Density, g/cm3

BC-430 Peracetic acidBroad spectrum oxidizing biocide. Prevents algae, fungus and bacteria growth. 10.0 ÷ 50.0 < 1.0 1.08 ± 0.05

1.7 Hydrogen peroxide based biocides



in system, ml/dm3

Reagent pH

Density, g/cm3

BC-455 Hydrogen peroxideBroad spectrum oxidizing biocide. Prevents algae, fungus and bacteria growth. Used in open cooling systems.

150.0 3.0 ± 1.0 1.20 ± 0.05

1.8 non-oxidizing and oxidixing biocides



in system, mg/dm3

Reagent pH

Density, g/cm3

BC-486

N, N-dimethyl-2-hydroxypropyl ammonium chloride (polymeric form)

Non-oxidizing biocide. Is used in water cooling systems. Prevents growth of algae, anaerobic and aerobic bacteria Suitable for use in hard water and in wide range of pH

20.0 ÷ 200.0 6.5 ± 0.5 1.05 ± 0.05

BC-495 IsothiazolinBroad spectrum non-oxidizing biocide. Is used in water cooling systems. Prevents growth of gram (+) and (-) bacteria, fungus and algae. Doesn’t foam.

100.0 ÷ 200.0 3.0 ÷ 5.0 1.02 ± 0.05

BC-477

Tetrakis (hydroxymethyl) phosphonium sulphate and non-ionic surfactants

Broad spectrum non-oxidizing biocide. Used in water cooling systems. Prevents algae, fungus and bacteria growth.

75.0 ÷ 150.0 ml/m3 (shock dosage up to

250 ml/m3)4.5 ± 0.5 1.10 ± 0.05

BC-450N-tallow-1,3-propylenediamine acetate

Broad spectrum non-oxidizing biocide. Prevents algae, fungus and bacteria growth in open and single-pass cooling systems.

10.0 ÷ 50.0 6.5 ± 0.5 1.00 ± 0.05

BC-460 GlutaraldehydeBroad spectrum non-oxidizing biocide. Prevents algae, fungus and bacteria growth. 50.0 ÷ 100.0 3.5 ± 0.5 1.07 ± 0.05

BC-434Poly (2-hydroxypropyl dimethylammonium) chloride

Non-oxidizing biocide. Used in cooling water systems. Prevents algae, anaerobic and aerobic bacteria growth. Suitable for use in hard water and in wide range of pH

20.0 ÷ 200.0 5.5 ± 0.5 1.15 ± 0.05

BC-464Isothiazolin, sulphates and nitrites of transition metals

Broad spectrum non-oxidizing biocide. Used in water cooling systems. Prevents gram (+) and (-) bacteria, fungus and algae growth. Does not foam.

30.0 ÷ 50.0 (shock dosage up

to 200)2.0 ÷ 4.0 1.10 ± 0.05

12



in system, mg/dm3

Reagent pH

Density, g/cm3

BC-422N, N-didecyl dimethylammonium chloride

Broad spectrum non-oxidizing biocide. Used in water cooling systems. Prevents gram (+) and (-) bacteria, fungus and mould growth. Has fungicidal properties.

100.0 ÷ 150.0 6.5 ÷ 8.5 0.91 ± 0.05

BC-4402,2-dibromo-3-nitrilopropionamide

Broad spectrum oxidizing biocide. Prevents algae, fungus and bacteria growth.

30.0 ÷100.0 ml/m3 (shock dosage up to

200 ml/m3)2.5 ÷ 3.5 1.23 ± 0.05

PC-490

N, N-dimethyl-2-hydroxypropyl ammonium chloride (polymeric form)

Non-oxidizing biocide. Used in water cooling systems. Prevents algae, fungus and bacteria growth. Suitable for use in wide pH range.

30.0 ÷ 50.0 ml/m3 6.0 ÷ 8.0 1.02 ± 0.05

1.9 Dispersants



in system, mg/dm3

Reagent pH

Density, g/cm3

BS-494 Phenol ethoxylates

Dispersant of biological deposits based on mixture of low-foam non-ionic surfactants. Improves system performance and prevents biofouling. Can be applied in combination with biocides based on chlorine compounds.

100.0 ml/m3 6.0 ÷ 7.0 1.01 ± 0.05

SS-777Sodium dioctyl sulfosuccinate

Surfactant based reagents. Prevents biofouling of systems. Used in co-current and circulating cooling systems. Used to remove hardly soluble oil contami-nation.

1.0 ÷ 100.0 5.0 ÷ 7.0 1.00 ± 0.05

PS-868 Polyacrylates Reagent based on homopolymers of alkali metals. Prevents formation of organic and mineral deposits in heat exchange systems. The dosage of

the reagent to be calculated

individually for each separate system

7.0 ± 0.5 1.13 ± 0.05

PS-886Polyacrylates of alkali metals and Isothiazolin

Reagent based on homopolymers of alkali metals. Used to control a broad spectrum of mineral deposits, formation of which is caused by the presence of iron and silicon oxides, calcium and magnesium hardness.

8.0 ± 0.5 1.07 ± 0.05

CS-799Nitrilotriacetates and Phosphonates of alkali metals

Reagent for chemical washing of systems. Used to remove scaling, oxides of iron and other metals in open and closed water circulating systems.

5.0 ÷ 7.0 1.33 ± 0.05

1.10 Defoaming reagents



Reagent pH

Density, g/cm3

DF-030 PolyalkyleneglycolDefoamer based on block copolymer of ethylene glycol and propylene glycol. Is used to prevent foam formationinboilerequipment.


individually

6.0 ÷ 7.0 1.01 ± 0.05

DF-040 PolymethylsilaneSilicone emulsion based defoamer. Is widely used for wastewater treatment. 7.0 ± 0.5 1.00 ± 0.05

13

2 CLOSED COOLInG SySTEMS

Thereisarangeofhighrequirementsforbiologicalandchemicalwaterpurityinbothclosedand open water cooling systems.

The formation of scale is not a big problem in closed systems, since due to negligible losses in these systems the volume of water is practically unchanged, and in a completely closed system none of the known scale forming substances precipitates and prevents heat transfer.

However, if water in a closed system is contaminated by microorganisms or contains dissolved oxygen,corrosionandtheformationofdifferenttypesofdepositsonequipmentsurfacescanoccur.

ITS WATERTM reagents (biocides, reagents for removing dissolved oxygen, antiscalants, dispersants and others) are designed specifically for solving problems which are typical for closed water cooling systems.

14

2.1 Complex reagents based on organic compounds



in system, ml/m3

Reagent pH

Density, g/cm3

PT-787Polyacrylates and hydroxides of alkali metals

Alkaline based reagent with addition of acrylic homopolymers of alkali metals. Applicable in soft or moderate hard water, provides a comprehensive balanced treatment. Can be used in conjunction with other reagents to provide control over phosphate levels and protection of condensate pipelines. Prevents corrosion by the principle of dual action: binds oxygen and forms a protective film that prevents scale formation.

~ 1.0 13.5 ± 0.5 1.33 ± 0.05

CB-808 1,2Tetraborates and nitrites of alkali metals, benzotriazole

Reagent based on composition of nitrites, tetraborates of alkali metals and organic corrosion inhibitors. Designed to prevent corrosion of steel, copper and other nonferrous metals.

5.0 ÷ 10.0 11.0 ± 0.5 1.18 ± 0.05

CB-812 1,2Benzotriazole and phosphon carboxylates of alkali metals

Reagent based on organic and inorganic corrosion inhibitors. Designed to prevent corrosion of steel, copper and other nonferrous metals.

1.0 ÷ 2.0 11.5 ± 0.5 1.22 ± 0.05

CB-818 1Monopropylene glycol and non-ionic surfactants


5.0 ÷ 10.0 7.5 ÷ 8.0 1.10 ± 0.05

CB-820 1,2Tetraborates and nitrites of alkali metals, benzotriazole

Reagent based on composition of nitrites, tetraborates of alkali metals and organic corrosion inhibitors. Designed to prevent corrosion of steel, copper and other nonferrous metals.

3.5 ÷ 4.0 g/dm3 13.0 ± 0.5 1.30 ± 0.05

CB-828 1Tetraborates, molybdates, phosphon carboxylates and polyacrylates of alkali metals


5.0 ÷ 10.0 7.0 ÷ 9.0 1.03 ± 0.05

CB-833 1,2Molybdates and phosphon carboxylates of alkali metals


1.5 ÷ 2.0 g/dm3 11.0 ± 0.5 1.27 ± 0.05

TT-899 Tolyltriazole

Auxiliary corrosion inhibitor. Used in open and closed water circulating systems. Creates an insolublefilmonthesurfaceofequipmentmadeof copper and its alloys. Effectively prevents corrosion of steel and aluminium when combined with other inhibitors.

The dosage of the reagent to be calculated individually for each separate

system

> 12.0 1.07 ± 0.05

SG-701

Phosphon carboxylates, molybdates, polyacrylates of alkali metals and anionic surfactants

Corrosion and scale inhibitor for heat exchange systems based on organic and inorganic corrosion inhibitors.

0.5 ÷ 2.0 7.0 ± 0.5 1.03 ± 0.05

1Usedinclosedcoolingsystems,aswellasinwaterboilersoflowpressure;2 Is not applicable for systems made of aluminium and its alloys.

2.2 Oxygen scavengers



in system, ml/m3

Reagent pH

Density, g/cm3

CB-980 Diethyl hydroxylamine

ReagentisareadilyvolatileliquidbasedonDiethylhydroxylamine. Applied to remove oxygen in high-pressure steam generators and circulating installations of hot water systems. Prevents corrosion of steel and copper surfaces.

20.0 (for removing 1 mg/dm3 O2)

10.0 ÷ 11.0 1.00 ± 0.05

2.3 Biocides



in system, mg/dm3

Reagent pH

Density, g/cm3

BC-469 DdichlorophenBroad spectrum biocide. Prevents algae, fungus and bacteria growth in open and single-pass cooling systems.

100.0 ÷ 200.0 13.0 ± 0.5 1.06 ± 0.05

BC-495 IsothiazolinBroad spectrum biocide used in water cooling systems. Prevents gram (+) and (-) bacteria, fungus and algae growth. Does not foam.

500.0 3.0 ÷ 5.0 1.02 ± 0.05

BC-4402,2-dibromo-3-nitrilpropionamid

Broad spectrum oxidizing biocide. Prevents algae, fungus and bacteria growth. 500.0 ml/m

3 3.0 ± 0.5 1.23 ± 0.05

1515

2.4 Antiscalants and dispersants



Reagent pH

Density, g/cm3

DS-762Hydrochloric acid and Ethoxylated fatty polyamines

Reagent based on hydrochloric acid and corrosion inhibitor complex for washing of systems, which forms a protective film on carbon steel, copper and brass. Used for descaling in water-heating, boiler andheatexchangerequipment.Notapplicableforcleaningofequipmentsurfacesmadeofstainlesssteel, aluminium and its alloys or have plating.


system

< 1.0 1.14 ± 0.05

AVI-755Hydrochloric and orthophosphoric acid

Reagent for flushing pipelines based on a mixture of mineral acids. Used mostly for removing intratubal sediments.

0.5 ± 0.5 1.01 ± 0.05

AXI-780 Organic fatty acidsReagent based on mixture of organic acids used for washing of systems. Used to remove “heavy” mineral deposits and metal oxides.

< 1.0 1.15 ÷ 1.20

AXI-784Hydrochloric and orthophosphoric acid

Reagent based on mixture of mineral acids used for washing of systems. Used to remove “heavy” mineral deposits and metal oxides.

0.5 ± 0.5 1.02 ± 0.05

AXI-760 Orthophosphoric acidReagent based on orthophosphoric acid used for washing of systems. Used to remove the “heavy” mineral deposits and metal oxides.

< 1.0 1.01 ± 0.05

DSP-775Sulfamic acid and ethoxylated fatty polyamines

Flushing reagent based on sulfamic acid and corrosion inhibitors complex. The reagent is intended for cleaning scaling from systems. Contains corrosion inhibitors complex for low carbon and stainless steel, copper and brass. Used for removing calcium deposits in water-heating, heat exchanger and boilerequipment.


system (system is filled with 10 ÷ 30 %

solution)

< 2.0 (1% soln.) powder

CS-799Nitrilotriacetates and phosphonates of alkali metals

Reagent is used to remove iron and other metal oxides and scaling. Used in open and closed water circulating systems. When used regularly, prevents formation of mineral deposits.


system (depending on

system condition)

5.0 ÷ 7.0 1.33 ± 0.05

2.5 Antifreeze agents



Reagent pH

Density, g/cm3

CBX-060 Monopropylene glycolMonopropylene glycol based antifreeze. Used in closed water heat and cooling systems.


system (is dosed

proportionally to system volume

to prevent freezing)

7.0 ± 0.5 1.03 ± 0.05

CBX-066 Monopropylene glycol

Monopropylene glycol based antifreeze. Used in closed water heat and cooling systems. Contains a dye for monitoring the level of reagent concentration in system.

7.0 ± 0.5 1.04 ± 0.05

CFZ-069Monoethylene glycol and phosphon carboxylates of alkali metals

Monopropylene glycol based antifreeze, which contains corrosion inhibitors for steel, nonferrous metals and their alloys. Used in water cooling systems.

10.0 ± 0.5 1.12 ± 0.05

CFZ-088 Monopropylene glycolAntifreeze based on pharm grade monopropylene glycol. Used in water cooling systems. 7.0 ± 0.5 1.05 ± 0.05

17

3 BOILER WATER TREATMEnT

Duetothefastincreasingcapacityofmodernboilerequipmentandtighteningofrequirementsfor water quality parameters, the organization of water chemistry is becoming particularlyimportant.

Physico-chemicalwatertreatmentforheatingequipmentcombinesasetofagentsthatensurereliable performance of boilers, heat exchangers, heating systems and construction materials of steam turbines. These reagents prevent destruction from corrosion, as well as formation of mineralandbiologicaldepositsonsurfacesofequipmentwhichareincontactwithwaterandsteam.

The complex of reagents also involves make-up water treatment, cleaning of turbines and production condensates, stabilization processing of feed and boiler water, cooling water and raw treatment, disinfection and treatment of wastewater.

To ensure effective physico-chemical water treatment and stabilization processing it is highly recommended to use the specially designed reagents of ITS WATERTM.

18

3.1 Complex reagents based on organic compounds



in system, mg/dm3

Reagent pH

Density, g/cm3

CB-930Metabisulfites and polyacrylates of alkali metals

Reagent based on sulphites of alkali metals. Used in low and medium pressure boilers for oxygen binding, which helps to ensure effective protection of the feed line and boiler from corrosion. Does not form compounds that have negative influence on technical conditions of the boilers.

Dosage of the reagent to be

calculated individually


> 13.0

1.28 ± 0.05

CB-802Polyacrylates of alkali metals

Alkaline based reagent for monitoring of make-up water pH Contains organic polymers for prevention of mineral deposits formation. Works in the conditions of elevated temperatures.

1.36 ± 0.05

CBX-080Polyacrylates of alkali metals

Alkaline based reagent for monitoring of make-up water pH level. Contains organic polymers for prevention of mineral deposits formation. Works in the conditions of elevated temperatures.

1.21 ± 0.05

CB-837 1,2Polyphosphates of alkali metals

Reagent based on polyphosphates of alkali metals. Used in heating systems of any pressure to reduce calcium and magnesium hardness.

6.5 ÷ 7.0 (1% soln.) powder

CB-838 1,2Polyphosphates and polyacrylates of alkali metals Reagent based on polyphosphates and polyacrylates of

alkali metals. Is used in the food industry.

7.0 ± 0.5

1.19 ± 0.05

CB-840 1,2Polyphosphates and polyacrylates of alkali metals 30.0 ÷ 70.0

(reagent concentration in system,

as Phosphates [PO43−])

1.12 ± 0.05

CB-848 1,2Polyphosphates and polyacrylates of alkali metals, Isothiazolin

Reagent based on polyphosphates and polyacrylates of alkali metals with addition of broad spectrum biocide. Used in heating systems of any pressure to reduce calcium hardness.

1.18 ± 0.05

CB-850Phosphates of alkali metals

Alkaline based reagent, used for high pressure boilers water treatment. Used in systems with about zero make-up water hardness.

Dosage of the reagent to be

calculated individually


11.0 ÷ 12.0 1.02 ± 0.05

CB-970 3Metabisulfites, polyphosphates and polyacrylates of alkali metals

Alkaline based reagent with addition of sulphites, polyphosphates and polyacrylates of alkali metals. Used for removal of oxygen from water. 50.0 ÷ 100.0

(reagent concentration in system,

as sulphites [SO32-])

> 13.0 1.14 ± 0.05

CB-960 3Metabisulfites, polyphosphates and polyacrylates of alkali metals

Reagent based on sulphites, polyphosphates and polyacrylates of alkali metals. Used for removal of oxygen from water.

6.0 ÷ 7.0 1.10 ± 0.05

1Slowstheprocessofscalinginsystem;2Recommendedforuseonanon-goingbasis,throughdosingintothefeedwaterwhichcontainshardnesssalts;3 Is used for treatment of makeup water with high baseline alkalinity, used in low-pressure boilers operating on demineralized water.

3.2 Tannin based reagents

Reagents Main components Reagent description


in system, mg/dm3

Reagent pH

Density, g/cm3

BT-878Quebracho extract and Isothiazolin

Weakly acidic reagent based on tannins with addition of broad range biocide. Used in combination with other ITS WATERTM reagents for balanced chemical treatment of water. Promotes the removal of oxygen and formation of a protective film on metal surfaces.

120.0 ÷ 160.0 3 4.0 ÷ 5.0 1.15 ± 0.05

PT-787 1Quebracho extract and polyacrylates of alkali metals

Strongly alkaline reagent based on tannins and poly-acrylates of alkali metals. Is used for complex balanced treatment of soft or moderately hard water.

12.0 ÷ 20.0 3 13.5 ± 0.5 1.33 ± 0.05

PT-788 1,2Quebracho extract and polyacrylates of alkali metals

Strongly alkaline reagent based on tannins and poly-acrylates of alkali metals. Used in combination with other ITS WATERTM reagents for balanced chemical treatment of water.

120.0 ÷ 160.0 3 12.5 ± 0.5 1.15 ± 0.05

PT-789 1,2Quebracho extract, polyacrylates of alkali metals and Isothiazolin

Weakly acidic reagent based on tannins with addition of dispersants and broad range biocide. Used in combination with other ITS WATERTM reagents for balanced chemical treatment of water.

120.0 ÷ 160.0 3 5.0 ÷ 7.0 1.17 ± 0.05

1Preventscorrosionontheprincipleofdualaction:removesoxygenandformsaprotectivefilmthatpreventsscaleformation;2Doesnotsignificantlyincreasethealkalinityofboilerwaterandthereforeisidealforboilerswheretheformationoffoamispossible;3Requiredreserveofreagentinsystem,astannins.

1919

3.3 Oxygen scavengers



Reagent pH

Density, g/cm3

CB-999Metabisulfites of alkali metals

Reagent for binding of dissolved oxygen. Is used in boilers of low and medium pressure with hot or deaerated makeup water. Is an effective additive for boilers operating units in standby or stop modes. Can be used in food industry.

8 µl/dm3 per 1 mg/dm3 O2

4.5 (1% soln.) powder

CB-980Diethyl hydroxylamine

Reagent is a highly volatile liquid based on Diethylhydroxylamine. Used in the steam generators and hot water recirculating units of high pressure to bind dissolved oxygen.Preventscorrosionofequipmentsurfacesmadeof steel and copper.


10.5 ± 0.5 1.00 ± 0.05

CB-920Polyphosphates and sulphites of alkali metals

Strongly alkaline reagent based on polyphosphates and sulphites of alkali metals. Used to bind dissolved oxygen and increase alkalinity. Suitable for treatment of low pressure boilers that operate on softened makeup water.

50 ÷ 100 µl/dm3 (reagent reserve

in system, as sulphites [SO3

2-])

> 13.0 1.30 ± 0.05

CB-940 1Metabisulfites of alkali metals

Reagent for binding of dissolved oxygen based on Metabisulfites of alkali metals. Is used in boilers of low and medium pressure. Is recommended for food industry, where use of heavy metal salts based reagents is unacceptable.


(50 mg/dm3 - reagent reserve in system, as sulphites [SO3

2-])

5.9 ± 0.1 1.30 ± 0.05

CB-950 1Metabisulfites and sulphates of alkali metals

Reagent for binding of dissolved oxygen based on Metabisulfites and sulphates of alkali metals. Used in boilers of low and medium pressure.

CB-910 1Metabisulfites of alkali metals

Reagent for binding of dissolved oxygen based on Metabisulfites of alkali metals. Is used in boilers of low and medium pressure. Used in installations where due tothehighalkalinityofrawwaterblowdownisrequired.


(50 mg/dm3 - reagent reserve in system, as sulphites [SO3

2-])

5.0 ± 0.5 1.30 ± 0.05

CB-990 CarbohydrazideReagent for binding of dissolved oxygen. Is used in boilers of low and medium pressure.


individuallyfor each separate

system

6.0 ÷ 8.5 1.03 ± 0.05

1 Rapid oxygen binding effect provides complete protection of the makeup line and boiler from corrosion.

3.4 Reagents for water treatment and steam line pH correction



Reagent pH

Density, g/cm3

AM-855 1Cyclohexylamine and diethylaminoethanol

Highly volatile amines based reagent. Used to maintain a constant pH level in steam lines. The dosage

of the reagent to be calculated


11,9 ± 0,1 0,99 ± 0,05

AM-865 1 CyclohexylamineCyclohexylamine based reagent. Used to maintain a constant pH level in steam lines. > 12,0 0,96 ± 0,05

AM-860

Cyclohexylamine and tallow propylene diamine ethoxylate

Reagent based on blend of amines. Used for prevention of corrosion in steam condensate pipes, which can be caused either by carbon dioxide or by dissolved oxygen.

12,0 ± 0,5 0,98 ± 0,05

AMX-050 1 CyclohexylamineCyclohexylamine based reagent. Used to maintain a constant pH level in steam lines.

1,4 ml/m3 of reagent

for 1 mg/dm3 reduction

of alkalinity

> 12,0 0,98 ± 0,05

AB-007 Sodium hydroxide

Strongly alkaline reagent. Used for increasing water рН, acids neutralization and provision of required alkalinelevel. Used in boilers, cooling systems, potable water supply and wastewater systems.

1 mg/dm3 of reagent

for 0,5 mg/dm3 increase

of alkalinity

13,5 ± 0,5 1,35 ± 0,05

1 Used in food industry. Used in hotwater supply systems of high pressure to increase pH without significant change in electrical conductivity.

3.5 Sludge conditioners


concentration in system, ml/m3

Reagent pH

Density, g/cm3

PS-868 1Polyacrylates of alkali metals

Reagent based on polyacrylates of alkali metals. Used in boiler units and cooling systems. 50 7,0 ± 0,5 1,13 ± 0,05

PS-886Polyacrylates of alkali metals and Isothiazolin

Reagent based on polyacrylates of alkali metals and isothiazolin. Used in boiler units and cooling systems. Prevents the formation of a wide range of mineral deposits caused by calcium and magnesium hardness, iron oxides and silica.

100 8,2 ± 0,5 1,07 ± 0,05

PS-887 1Polyacrylates of alkali metals

Reagent based on polyacrylates of alkali metals. Used in boiler units and cooling systems. 100 7,0 ± 0,5 1,05 ± 0,05

1Preventstheformationofplaqueandmineralbiofoulinginheat-exchangesystems,formingeasilyremovablesludge.

20

3.6 Reagents for removal of deposits



Reagent pH

Density, g/cm3

AVI-757Hydrochloric and Orthophosphoric acid

Reagent based on a blend of mineral acids that is used for removal of salt deposits. Specifically designed for use in food industry.




< 2,0 1,04 ± 0,05

AXI-770Orthophosphoric acid

Strongly acidic cleaner. It is used to remove mineral deposits and metal oxides. < 1,0 1,20 ± 0,05

DS-762Hydrochloric acid and Ethoxylated fatty polyamines

Reagent based on a blend of hydrochloric acid and corrosion inhibitors that form a protective film layer on theinternalsurfaceofequipmentthatismadeofcarbonsteel, copper and brass. Used for the descaling of boilers, water-heating and heat-exchange systems. Cannot be applied to systems made of stainless steel or aluminium and its alloys or if galvanized surface is present.



for each separate system (system is filled with 10 - 50 % solution)

< 1,0 1,14 ± 0,05

DSP-775Sulfamic acid and Ethoxylated fatty polyamines

Sulfamic acid based reagent. Used for flushing salt deposits out from systems. Contains a blend of film-forming inhibitors in order to prevent acid corrosion of low carbon and stainless steel, copper and brass. Used to remove calcium deposits from steam boilers, water-heatingequipmentandheatexchangers.



for each separate system (system is filled with 10 - 30 % solution)

< 2,0 (1% soln.)

suspen-sion

21

4 MEMBRAnE SySTEMS

Membrane filtration technologies are most effective in water treatment. They allow potable water to be produced from surface and underground sources with a high degree of purification from impurities and microorganisms. In case of municipal sewage treatment, membrane filtration technologies allow suitable technical water to be produced and in case of industrial water treatment circulated water is obtained.

The membranes used in the processes of water and wastewater treatment can be classified into micro-, ultra-, nano- and hyper filtration (i.e., reverse osmosis) depending on the size of the pores and impurities detained.

Unlike the traditional methods (mechanical filtration, physico-chemical treatment, decontamination),whichrequirea largeterritory,a largenumberofstaffandhighoperatingcosts, membrane technologies have a number of advantages:

•compactnessoftheequipmentandsimplicityofthepowerscaleup; •reliablebarrierfiltrationandsufficientlylowpowerconsumption; •abilitytoprovidefullautomatizationofwatertreatmentprocessesandqualitycontrol.

However, for efficient use of membrane technologies and to maximize production capabilities, it is necessary to carry out a continuous treatment by ITS WATERTM antiscalant and biocide reagents, which will inhibit the formation of mineral and biological deposits in the pores of the membranes.

Ifantiscalantsandbiocideshavenotbeenpreviouslyusedonthemembraneequipment,itisrecommended to use ITS WATERTM cleaners prior to commissioning.

22

4.1 Antiscalants



in system, mg/dm3

Reagent pH

Density, g/cm3

PS-880Phosphonates of alkali metals

Weakly acidic antiscalant which is specially designed for reverse osmosis (RO) systems. Reagent is effective against deposits formed by carbonate, fluoride and calcium sulphate, strontium and barium sulphate, silicon dioxide and iron compounds.

3.0 ÷ 6.0 4.5 ÷ 6.5 1.20 ± 0.05

PS-888Phosphonates of alkali metals

Weakly alkaline antiscalant specifically designed for RO. Reagent is effective against deposits formed by carbonate, fluoride and calcium sulphate, strontium and barium sulphate, silicon dioxide and iron compounds.

2.0 ÷ 5.0 9.0 ÷ 10.5 1.35 ± 0.05

4.2 Biocides



in system, ml/m3

Reagent pH

Density, g/cm3

BC-4402,2-dibromo-3-nitrilpropionamid

Broad spectrum oxidizing biocide. Used for nano-filtration and disinfection of RO membranes. Prevents bacteria, fungus and algae growth.

50.0 ÷ 200.0 2.5 ÷ 3.5 1.23 ± 0.05

BC-405Perasacetic acid

Broad spectrum oxidizing biocide based on perasacetic acid. Used for nano-filtration and disinfection of RO membranes. Kills bacteria, fungus and algae and prevents their growth.

1.0 ÷ 5.0< 1.0 1.12 ± 0.05

BC-413 0.3 ÷ 1.5

4.3 Cleaners



Reagent pH

Density, g/cm3

HAI-727 Hydrochloric acidAcidic based reagent for washing of RO membrane. Used for removing of “heavy” mineral deposits and metal oxides. Can be used for pH level correction.


to be calculated individually for each separate

system

< 1.0 1.05 ± 0.05

ROA-018Glutamic acid salts of alkali metals

Strongly alkaline based cleaning agent for RO membranes and nano-filtration from inorganic and organic deposits. 1.0 ÷ 2.0 %

1 > 13.5 1.15 ± 0.05

ROC-020Ammonium citrate

Ammonium citrate based reagent. Used for removing of mineral deposits, cleaning of RO membranes and nano-filtration.

4.0 % 1 3.5 ÷ 4.0 1.15 ± 0.05

ROE-021 EDTAEDTA based reagent. Used for removing of mineral deposits, cleaning of RO membranes and nano-filtration. 2.0 ÷ 2.5 %

1 11.0 ÷ 12.0 1.30 ± 0.05

1 The concentration of the working solution which is used for cleaning of RO membranes.

23

5 AnCILLARy REAGEnTS

5.1 Aluminium based coagulants

Reagent Main components Reagent descriptionReagent concentration

in systemReagent

pHDensity, g/cm3

AC-140Polyaluminum chloride

Low basity aluminium coagulant. Used for pre-treatment of water from suspended solids.



(a trial coagulation is needed)

< 2.01.36 ± 0.05

AC-168High basity aluminium coagulant. Used for pre-treatment of water from suspended solids. 1.27 ± 0.05

5.2 Iron based coagulants


in systemReagent

pHDensity, g/cm3

FC-117 Ferric chloride

Iron based coagulants. Used for pre-treatment of water from suspended solids.



(a trial coagulation is needed)

< 2.0

1.40 ± 0.05

FC-116 Ferric sulphate 1.50 ± 0.05

FC-118Ferric chloride sulphate 1.50 ± 0.05

5.3 Chemical for correctional water treatment


in systemReagent

pHDensity, g/cm3

DCH-010Sodium thiosulfate Reagent for removing excess chlorine from water.

9 ml/dm3 of reagent reduces the Cl- content

by 1 mg/dm310.0 ± 0.5 1.30 ± 0.05

AB-007Sodium hydroxide

Strongly alkaline reagent. Used to increase pH of the treated water, acid neutralization and providing the necessary level of alkalinity.

1 mg/dm3 of reagent increases alkalinity level

by 0.5 mg/dm3 13.5 ± 0.5 1.35 ± 0.05

HAI-727Hydrochloric acid

Reagent based on hydrochloric acid which is used for lowering рН and total alkalinity. The dosage

of the reagent to be calculated


< 1.0

1.05 ± 0.05

AXI-766Hydrochloric acid

Reagent based on concentrated Hydrochloric acid which is used for lowering рН and total alkalinity. Can be used with corrosion inhibitor for system washing.

1.10 ± 0.05

PLP-099Sodium bicarbonate Reagent for lowering рН and total alkalinity.

50 mg/dm3 of reagent increases alkalinity level by 30 mg/dm3

> 12.0 (1% soln.) powder

PLM-096Sodium hydrosulphate Reagent for lowering рН and total alkalinity.

50 mg/dm3 of reagent reduces the alkalinity

by 20 mg/dm31.2 ÷ 1.3 (1% soln.) powder

PLC-090Calcium chloride Reagent for increasing calcium hardness.

50 mg/dm3 of reagent increases calcium

hardness by 25 mg/dm35.0 ÷ 8.0 (1% soln.) powder

PWD-055Sodium carbonate

Alkaline reagent. Used for pH level correction after acidic treatment.



> 12.0 (1% soln.) powder

5.4 Stabilization treatment for water supply lines


in system, ml/m3Reagent

pHDensity, g/cm3

WG-705Polyphosphates of alkali metals

Reagent is used for water treatment in order to prevent the formation of intratubal corrosion of cold and hot water supply systems.

20.0 ÷ 30.0 7.0 ± 0.5 1.18 ± 0.05

WG-707Silicates of alkali metals

Corrosion inhibitor. Is used to prevent corrosion in pipelines and water storage tanks, especially when the water is soft.

20.0 ÷ 30.0 13.0 ± 0.5 1.40 ± 0.05

24

5.5 Drainage systems treatment



in system, mg/dm3

Reagent pH

Density, g/cm3

BL-412 EnzymesNatural enzyme based biocide which is ecologically friendly. Removes impurities and odours in drainage systems and grease traps.

1.0 ÷ 10.0 6.8 ± 0.5 1.10 ± 0.05

5.6 Reagent for water tracing

Reagent Main components Reagent description !!!


in system, mg/dm3

Reagent pH

Density, g/cm3

FT-077 Dihydroxy fluoranReagent containing organic fluorescent dye. Is used for monitoring and tracing of water flow. 50.0 5.0 ÷ 7.0 1.00 ± 0.05

25

6 EnGInEERInG

In the area of services for complex engineering COAGULANT closely works with the company AQUA-HOLDING.

For over 10 years the project and engineering company AQUA-HOLDING has been working on the Ukrainian market, providing exclusive services in the field of integrated engineering systems, water treatment, wastewater purification technologies and circulating water stabilisation for a number of industries: metallurgical, mining and processing, oil refining, chemical, food and many others. Every year the range of services provided expands. AQUA-HOLDING is also widely known abroad, leading industrial enterprises and international companies are on its client list.

AQUA-HOLDING develops individual projects, supplies water treatment units for industrial purposes and provides wastewater treatment and solution preparation systems, dosing and furtherdilutionequipmentforallsectorsofindustryandproduction.

Depending on the customer’s requests, AQUA-HOLDING specialists not only develop theprojectconceptandassembletheequipment,butalsooffercomprehensivesolutionstoanytechnical problem, including the “turnkey” design and model of operation.

Through an integrated approach to solving technical problems AQUA-HOLDING ensures that its customers increase the economic and technological effectiveness of their manufacturing processes.

26

...........................................................................................................................................................................................................

...........................................................................................................................................................................................................

...........................................................................................................................................................................................................

...........................................................................................................................................................................................................

...........................................................................................................................................................................................................

...........................................................................................................................................................................................................

...........................................................................................................................................................................................................

...........................................................................................................................................................................................................

...........................................................................................................................................................................................................

...........................................................................................................................................................................................................

...........................................................................................................................................................................................................

...........................................................................................................................................................................................................

...........................................................................................................................................................................................................

...........................................................................................................................................................................................................

...........................................................................................................................................................................................................

...........................................................................................................................................................................................................

...........................................................................................................................................................................................................

...........................................................................................................................................................................................................

...........................................................................................................................................................................................................

...........................................................................................................................................................................................................

...........................................................................................................................................................................................................

...........................................................................................................................................................................................................

...........................................................................................................................................................................................................

...........................................................................................................................................................................................................

...........................................................................................................................................................................................................

...........................................................................................................................................................................................................

...........................................................................................................................................................................................................

...........................................................................................................................................................................................................

...........................................................................................................................................................................................................

...........................................................................................................................................................................................................

...........................................................................................................................................................................................................

...........................................................................................................................................................................................................

...........................................................................................................................................................................................................

...........................................................................................................................................................................................................

...........................................................................................................................................................................................................

nOTES

28

For consultation and purchasing of reagents please contact:

Tel./Fax: +380 56 770 22 02

E-mail: [email protected]

Manufacturer:Pology Chemical Plant COAGULANT ALC70605 Pology, Zaporozhye region, 243 Krupskoy st.Tel. +380 6165 31 2 30Fax +380 6165 31 2 34www.coagulant.com.ua

Official representative:Project and engineering company AQUA-HOLDING Ltd.49044, Dnepropetrovsk, 5 Komsomolska st. Tel./Fax +380 56 770 22 01www.aqua-holding.com

This booklet has an informational and advertising character

2015

Documents

PRODUCT CATALOGUE - Аквахолдингaqua-holding.com/files/dl_button_files/2015_06_09_its_water_cataloge... · metals and non-ionic surfactants Alkaline based reagent with addition