Upload
hadiep
View
225
Download
1
Embed Size (px)
Citation preview
3
Dear customers and business partners,
MEDENtika haS CharaCtEr. and it is this character that gives us a morally sound base. in a world that is becoming more and more focused on the laws that drive market forces, we feel that this position is not only right, but important.
What characterises Medentika is also our belief in the power of our ideas and in the innova-tive power of our products. We are Medentika – and if the Medentika label is on the pack-et, there is more than just an implant component inside, but an implant component that bears the knowledge and the experience that we have been putting into our products since Medentika was founded. We offer our customers our enthusiasm – a feature we use to perfect our products on a daily basis. We take this task seriously, but we also embrace it with passion. and the result is an original product manufactured with the highest interface precision from an extremely wide range of prosthetics.
this catalogue reflects our attitude in every single product – and it features over 400 new parts. take a look, for instance at the implant bearing, individually reamed bars, bridges and abut-ments. these solutions open up new, even more diverse treatment options for you and greater comfort and better functionality for your patients.
Yours,Jürgen kälber, Bernd Gaddum, Frank Fix and the entire Medentika team
Precision and Functionality implant Components made in Germany
4
medentiCAD®
digital options
titanium bases1. and 2. Generation
individualAbutments medenti-BASe Bridges and Bars
Medentika Titanium bases:
Suitable for a variety of indications and implant systems..
Individual, single unit titanium abutments:
Construct independently or model manually.
With Medenti-BASE®-Abutments:
Create multi-unit bar and bridge constructions. Constructed digitally or modelled manually.
With MedentiCAD bridges and bars:
Create multi-unit bridge and bar constructions with CaD/CaM.
Whether you are using hybrid abutments on a titanium base, individual titanium abutments or multiple unit bridges and bars: with MedentiCaD you have a wide range of options for creating high precision and functional prosthetics.
5
MedentiCaD bridges and bars allow you to create individual, multi-unit bridge and bar constructions with CaD/CaM on MedentiBaSE abutments.
You can either opt for bar and bridge constructions screwed directly onto MedentiBaSE abutments, or for passive-fit with bar and bridge constructions screwed with MedentiBaSE ad-hesive caps.
You can use our existing CaD system in association with our free-of-charge MedentiCaD library for bridges and bars, avoiding any further investments.
Login to MedentiCaD® to send the bridge or bar construc-tion you have made. On receipt of the construction data the bridge or bar you constructed is produced in high precision and then dispatched to you
barstitanium 2 implants CoCr 2 implants
3 implants 3 implants
4 implants 4 implants
5 implants 5 implants
6 implants 6 implants
7 implants 7 implants
8 implants 8 implants
bridgestitanium 2 implants CoCr 2 implants
3 implants 3 implants
4 implants 4 implants
5 implants 5 implants
6 implants 6 implants
7 implants 7 implants
8 implants 8 implants
medentiCAD®
Bridges and barsNEW
B-Serie6 B-Series
Products indicated with ® are registered brand names of respective manufactures.
the B-Series abutments are compatible with
Sky Bredent® implants
B-Series
LaB aNaLOG
Stainless Steel
NEW
implant connection 3,5–5,5
article Number B 50
aButMENt SCrEW
titanium ti6aL4V
torx t6
recommended torque: 25 Ncm
NEW
implant connection 3,5–5,5
article Number B 60
LaB SCrEW
red-coated
NEW
implant connection 3,5–5,5
article Number B 60 L
implant connection 3,5–5,5
NEW
The B-Series abutments are compatible with Sky Bredent® Implants B-Series
B-S
eri
es
Sky
Bre
den
t®
7
titaNiuM BaSE FOr ZirkONiuM aButMENt 2. GENEratiON
Wax uP hEiGht 3,5 MM
titanium Grade 5 CF
incl. abutment screw
Gingiva height 0,3 mm
recommended torque: 25 Ncm
NEW
implant connection 3,5–5,5
article Number B 1000
titaNiuM BaSE FOr ZirkONiuM aButMENt 2. GENEratiON
Wax uP hEiGht 5,5 MM
titanium Grade 5 CF
incl. abutment screw
Gingiva height 0,3 mm
recommended torque: 25 Ncm
NEW
implant connection 3,5–5,5
article Number B 1100
titaNiuM BaSE FOr BarS aND BriDGES rOtatiNG
Wax uP hEiGht 3,5 MM
titanium Grade 5 CF
incl. abutment screw
Gingiva height 0,3 mm
recommended torque: 25 Ncm
NEW
implant connection 3,5–5,5
article Number B 1500
SCaNBODY 2. GENEratiON
titanium, special-coated incl. Screw
for titanium Base 2. Generation and MedentiCaD abutment
for intra-oral scanning
sterilisable
NEW
implant connection 3,5–5,5
article Number B 1400
MedentiCaD-aButMENt
the customised, single-part abutment incl. abutment screw
titanium Grade 5 CF
recommended torque: 25 Ncm
NEW
implant connection 3,5–5,5
article Number B 9000
implant connection 3,5–5,5
medentiCAD®
B-Serie8 B-Series
NEW
MedentiCaD Wax uP BaSE
incl. Screw incl. Scan
Steel
attENtiON: For use on the Model only!
implant connection 3,5–5,5
article Number B 9100
implant connection 3,5–5,5
The B-Series abutments are compatible with Sky Bredent® Implants B-Series
B-S
eri
es
Sky
Bre
den
t®
9
MedentiBaSE-aButMENt
for bars and bridges
titanium Grade 5 CF
implant connection 3,5–5,5 mm
recommended torque: 25 Ncm
NEW
Gingiva height (mm) 0,5 1,5 2,5 3,5 4,5
article Number B 4000 B 4100 B 4200 B 4300 B 4400
MedentiBaSE PrOSthEtiC-COMPONENtS NEW
Bridge screw B 4600 titanium Cap B 4700 incl. Bridge screw Plastic Cap B 4710 incl. Bridge screw Gold Cap Castable B 4720 incl. Bridge screw
recommended torque: 15 Ncm
article Number B 4600 B 4700 B 4710 B 4720
MedentiBaSE aDhESiVE CaP FOr PaSSiVE-Fit NEW
titanium adhesive Cap short B 4800 incl. Bridge screwPlastic adhesive Casing short B 4810 incl. Modelling screwtitanium adhesive Cap long B 4820 incl. Bridge screwPlastic adhesive Casing long B 4830 incl. Modelling screw
recommended torque: 15 Ncm
article Number B 4800 B 4810 B 4820 B 4830
MedentiBaSE SCaNBODY B 4900 NEW for MedentiBaSE-aButMENt
Stainless Steel, special-coated
incl. Bridge screw
for bridges and bars
for intra-oral scanning
sterilisable
article Number B 4900
MedentiBaSE COVEr CaP B 4610 NEW
MedentiBaSE iMPLaNt PiCk uP B 4620
MedentiBaSE LaB aNaLOG 4630
MedentiBaSE SCrEW DriVEr/ratChEt M 11-6
article Number B 4610 B 4620 4630 M 11-6
MedentiBaSE Finisher Connection geometry M 17 NEW MedentiBaSE Finisher screw head M 18
Carbide
this is used to finish the fitting surfaces for the plastic cap B 4710 after casting. the finishers are used in the processing holder prosthetic M 04.
article Number M 17 M 18
implant connection 3,5–5,5
medentiBASE®
B-Serie10 B-Series
medentiLOC®
attENtiON: You always require a driver hex 1,26 mm M 03-1 or M 10-1 to screw in the MedentiLOC abutments.
MedentiLOC aButMENt
titanium Grade 5 CF
titanium Nitrit Coating
one-piece
implant connection 3,5–5,5 mm
recommended torque: 25 Ncm
NEW
Gingiva height (mm) 1 2 3 4 5
article Number B 2000 B 2100 B 2200 B 2300 B 2400
MedentiLOC aButMENt
aNGLED 15°
titanium Grade 5 CF
titanium Nitrit Coating
two-piece incl. Screw
implant connection 3,5–5,5 mm
recommended torque: 25 Ncm
NEW
Gingiva height (mm) 1 2 3 4 5
article Number B 2500-1 B 2600-1 B 2700-1 B 2800-1 B 2900-1
turNiNG iNStruMENt FOr MedentiLOC- aButMENt
StraiGht/aNGLED
Lab Screwdriver/ratchet
NEW
type MedentiLOC straight
MedentiLOC straight
MedentiLOC angled
MedentiLOC angled
article Number M 03-1 M 10-1 M 03-7 M 10-7
MedentiLOC
LaB aNaLOG
Stainless Steel
NEW
type MedentiLOC straight
MedentiLOC angled
article Number 56 57
iNSErt
For machining holder prosthetic dentistry
Stainless Steel
NEW
implant connection 3,5–5,5
article Number B 40
MaChiNiNG hOLDEr PrOSthEtiC DENtiStrY M 04Stainless Steel massiveFits all seriesMaChiNiNG hOLDEr PrOSthEtiC DENtiStrY iN WOODEN tOOL BOx MB 05
Box incl. machining holder prosthetic dentistry and allen key
NEW
article Number M 04 MB 05
The B-Series abutments are compatible with Sky Bredent® Implants B-Series
B-S
eri
es
Sky
Bre
den
t®
11
NOVaLOC™ PrOCESSiNG PaCkaGE NEW
Matrix housing titanium/PEEk retention insert white : retention value: light retention insert yellow : retention value: medium
retention insert green : retention value: strong
Mounting Collar Silicone
2 Pieces per package
incl. mounting insert
Material Matrix housing
titanium PEEk
article Number 2010.601 2010.611
GiNGiVa hEiGht MEaSuriNG tOOL aLtuStM
NEW
type Gingiva height measuring tool altustM
article Number 2013.901
B-Serie12 B-Series
PLEASE NOTE: All OptilocTM abutments are available at the end of 2013.Find more details about OptiloctM abutments on page 88
OPtiLOC™ aButMENt
titanium Nitrit Coating
one-piece
implant connection 3,5-5,5 mm
recommended torque: 25 Ncm
NEW
Gingiva height (mm) 1 2 3 4 5
article Number B 5000 B 5100 B 5200 B 5300 B 5400
OPtiLOC™ PrOCESSiNG PaCkaGE NEW
Matrix housing CoCr/PEEkretention insert white : retention value: light retention insert yellow : retention value: medium
retention insert green : retention value: strong
Mounting Collar Silicone
2 Pieces per package
Material Matrix housing
CoCr PEEk
article Number 2012.501 2012.511
turNiNG iNStruMENt
FOr OPtiLOCtM aButMENt
Lab Screwdriver/ratchet
NEW
type short long
article Number M 11-9 M 10-9
GiNGiVa hEiGht MEaSuriNG tOOL aLtuStM
NEW
type Gingiva height measuring tool altustM
article Number 2013.901
The B-Series abutments are compatible with Sky Bredent® Implants B-Series
B-S
eri
es
Sky
Bre
den
t®
13
14 C-Series
implant connection 3,3 3,8 4,3
Products indicated with ® are registered brand names of respective manufactures.
the C-Series abutments are compatible to
Camlog® implants
C-Series
aButMENt SCrEW
titanium ti6aL4V
hex 1,26 mm
recommended torque: 20 Ncm
NEW
implant connection 3,3 3,8 4,3
article Number C 60 C 60 C 60
medentiCAD®
titaNiuM BaSE FOr BarS aND BriDGES rOtatiNG
Wax uP hEiGht 3,5 MM
titanium Grade 5 CF
incl. abutment screw
Gingiva height 0,3 mm
recommended torque: 20 Ncm
NEW
implant connection 3,3 3,8 4,3
article Number C 1500 C 1510 C 1520
medentiBASE®
MedentiBaSE aDhESiVE CaP FOr PaSSiVE-Fit
titanium adhesive Cap short C 4800 incl. Bridge screwPlastic adhesive Casing short C 4810 incl. Modelling screwtitanium adhesive base long C 4820 incl. Bridge screwPlastic adhesive base long C 4830 incl. Modelling screw
recommended torque: 15 Ncm
NEW
article Number C 4800 C 4810 C 4820 C 4830
15The C-Series abutments are compatible withCamlog® Implants C-Series
C-S
eri
es
Cam
log
®
MedentiBaSE Finisher connection geometry M 17 NEW MedentiBaSE Finisher screw head M 18
Carbide
this is used to finish the fitting surfaces for the plastic cap C 4710 after casting. the finishers are used in the processing holder prosthetic M 04.
article Number M 17 M 18
NOVaLOC™ PrOCESSiNG PaCkaGE Matrix housing titanium/PEEk retention insert white : retention value: light retention insert yellow : retention value: medium
retention insert green : retention value: strong
Mounting Collar Silicone
2 Pieces per package
incl. mounting insert
Material Matrix housing
titanium PEEk
article Number 2010.601 2010.611
GiNGiVa hEiGht MEaSuriNG tOOL aLtuStM
NEW
type Gingiva height measuring tool altustM
article Number 2013.901
16 C-Series
PLEASE NOTE: All OptilocTM abutments are available at the end of 2013.Find more details about OptiloctM abutments on page 82
OPtiLOCtM aButMENt
titanium Nitrit Coating
one-piece
implant connection 3,3 mm
recommended torque: 20 Ncm
NEW
Gingiva height (mm) 1 2 3 4 5
article Number C 5000 C 5100 C 5200 C 5300 C 5400
OPtiLOCtM aButMENt
titanium Nitrit Coating
one-piece
implant connection 3,8 mm
recommended torque: 30 Ncm
NEW
Gingiva height (mm) 1 2 3 4 5
article Number C 5010 C 5110 C 5210 C 5310 C 5410
OPtiLOCtM aButMENt
titanium Nitrit Coating
one-piece
implant connection 4,3 mm
recommended torque: 30 Ncm
NEW
Gingiva height (mm) 1 2 3 4 5
article Number C 5020 C 5120 C 5220 C 5320 C 5420
OPtiLOC™ PrOCESSiNG PaCkaGE NEW
Matrix housing CoCr/PEEkretention insert white : retention value: light retention insert yellow : retention value: medium
retention insert green : retention value: strong
Mounting Collar Silicone
2 Pieces per package
Material Matrix housing
CoCr PEEk
article Number 2012.501 2012.511
turNiNG iNStruMENt
FOr OPtiLOCtM aButMENt
Lab Screwdriver/ratchet
type short long
article Number M 11-9 M 10-9
GiNGiVa hEiGht MEaSuriNG tOOL aLtuStM
NEW
type Gingiva height measuring tool altustM
article Number 2013.901
18 D-Series
implant connection 3,3 3,8/4,3
LaB aNaLOG
Stainless Steel
NEW
implant connection 3,3 3,8/4,3
article Number D 50 D 51
aButMENt SCrEW
titanium ti6aL4V
hex 1,26 mm
recommended torque: 20 Ncm
NEW
implant connection 3,3 3,8/4,3
article Number D 60 D 60
LaB SCrEW
red-coated
NEW
implant connection 3,3 3,8/4,3
article Number D 60 L D 60 L
tEMPOrarY aButMENt
titanium Grade 5 CF
incl. abutment screw
recommended torque: 20 Ncm
NEW
implant connection 3,3 3,8/4,3
article Number D 3500 D 3510
Products indicated with ® are registered brand names of respective manufactures.
the D-Serie abutments are compatible with
Conelog® implants
D-Series
19The D-Series abutments are compatible with Conelog® Implants D-Series
D-S
eri
es
Co
nel
og
®
implant connection 3,3 3,3 3,8/4,3 3,8/4,3
medentiCAD®
titaNiuM BaSE FOr ZirkONiuM aButMENt 2. GENEratiON
Wax uP hEiGht 3,5 MM
titanium Grade 5 CF
incl. abutment screw
recommended torque: 20 Ncm
NEW
Gingiva height (mm) 0,65 1,15 0,65 1,15
implant connection 3,3 3,3 3,8/4,3 3,8/4,3
article Number D 1000 D 1200 D 1010 D 1210
titaNiuM BaSE FOr ZirkONiuM aButMENt 2. GENEratiON
Wax uP hEiGht 5,5 MM
titanium Grade 5 CF
incl. abutment screw
recommended torque: 20 Ncm
NEW
Gingiva height (mm) 0,65 1,15 0,65 1,15
implant connection 3,3 3,3 3,8/4,3 3,8/4,3
article Number D 1100 D 1300 D 1110 D 1310
titaNiuM BaSE FOr BarS aND BriDGES rOtatiNG
Wax uP hEiGht 3,5 MM
titanium Grade 5 CF
incl. abutment screw
Gingiva height 0,65 mm
recommended torque: 20 Ncm
NEW
implant connection 3,3 3,8/4,3
article Number D 1500 D 1510
SCaNBODY 2. GENEratiON
titanium, special-coated incl. Screw
for titanium Base 2. Generation and MedentiCaD abutment
for intra-oral scanning
sterilisable
NEW
implant connection 3,3 3,8/4,3
article Number D 1400 D 1410
MedentiCaD-aButMENt
the customised, single-part abutment incl. abutment screw
titanium Grade 5 CF
recommended torque: 20 Ncm
NEW
implant connection 3,3 3,8/4,3
article Number D 9000 D 9010
20 D-Series
implant connection 3,3 3,8/4,3
NEWMedentiCaD Wax uP BaSE
incl. Screw incl. Scan
Steel
attENtiON: For use on the Model only!
implant connection 3,3 3,8/4,3
article Number D 9100 D 9110
medentiBASE®
MedentiBaSE aDhESiVE CaP FOr PaSSiVE-Fit
titanium adhesive Cap short D 4800 incl. Bridge screwPlastic adhesive Casing short D 4810 incl. Modelling screwtitanium adhesive base long D 4820 incl. Bridge screwPlastic adhesive base long D 4830 incl. Modelling screw
recommended torque: 15 Ncm
NEW
article Number D 4800 D 4810 D 4820 D 4830
MedentiBaSE Finisher connection geometry M 17 MedentiBaSE Finisher screw head M 18
Carbide
this is used to finish the fitting surfaces for the plastic cap D 4710 after casting. the finishers are used in the processing holder prosthetic M 04.
NEW
article Number M 17 M 18
medentiLOC®
attENtiON: to screw in the angled MedentiLOC abutments you need a special turning instrument Driver hex 1,26 mm M 03-7 or M 10-7.
MedentiLOC aButMENt
aNGLED 15° - tYPE 1
titanium Grade 5 CF
titanium Nitrit Coating
implant connection 3,3 mm
two-piece incl. Screw
recommended torque: 20 Ncm
NEW
Gingiva height (mm) 1 2 3 4 5
article Number D 2500-1 D 2600-1 D 2700-1 D 2800-1 D 2900-1
21The D-Series abutments are compatible with Conelog® Implants D-Series
D-S
eri
es
Co
nel
og
®
MedentiLOC aButMENt
aNGLED 15° - tYPE 2
titanium Grade 5 CF
titanium Nitrit Coating
implant connection 3,3 mm
two-piece incl. Screw
recommended torque: 20 Ncm
NEW
Gingiva height (mm) 1 2 3 4 5
article Number D 2500-2 D 2600-2 D 2700-2 D 2800-2 D 2900-2
MedentiLOC aButMENt
aNGLED 15° - tYPE 1
titanium Grade 5 CF
titanium Nitrit Coating
implant connection 3,8/4,3 mm
two-piece incl. Screw
recommended torque: 20 Ncm
NEW
Gingiva height (mm) 1 2 3 4 5
article Number D 2510-1 D 2610-1 D 2710-1 D 2810-1 D 2910-1
MedentiLOC aButMENt
aNGLED 15° - tYPE 2
titanium Grade 5 CF
titanium Nitrit Coating
implant connection 3,8/4,3 mm
two-piece incl. Screw
recommended torque: 20 Ncm
NEW
Gingiva height (mm) 1 2 3 4 5
article Number D 2510-2 D 2610-2 D 2710-2 D 2810-2 D 2910-2
NOVaLOC™ PrOCESSiNG PaCkaGEMatrix housing titanium/PEEk retention insert white : retention value: light retention insert yellow : retention value: medium
retention insert green : retention value: strong
Mounting Collar Silicone
2 Pieces per package
incl. mounting insert
Material Matrix housing
titanium PEEk
article Number 2010.601 2010.611
GiNGiVa hEiGht MEaSuriNG tOOL aLtuStM
NEW
type Gingiva height measuring tool altustM
article Number 2013.901
22 D-Series
PLEASE NOTE: All OptilocTM abutments are available at the end of 2013.Find more details about OptiloctM abutments on page 82
OPtiLOCtM aButMENt
titanium Nitrit Coating
one-piece
implant connection 3,3 mm
recommended torque: 20 Ncm
NEW
Gingiva height (mm) 1 2 3 4 5
article Number D 5000 D 5100 D 5200 D 5300 D 5400
OPtiLOCtM aButMENt
titanium Nitrit Coating
one-piece
implant connection 3,8/4,3 mm
recommended torque: 20 Ncm
NEW
Gingiva height (mm) 1 2 3 4 5
article Number D 5010 D 5110 D 5210 D 5310 D 5410
OPtiLOC™ PrOCESSiNG PaCkaGE NEW
Matrix housing CoCr/PEEkretention insert white : retention value: light retention insert yellow : retention value: medium
retention insert green : retention value: strong
Mounting Collar Silicone
2 Pieces per package
Material Matrix housing
CoCr PEEk
article Number 2012.501 2012.511
turNiNG iNStruMENt
FOr OPtiLOCtM aButMENt
Lab Screwdriver/ratchet
type short long
article Number M 11-9 M 10-9
GiNGiVa hEiGht MEaSuriNG tOOL aLtuStM
NEW
type Gingiva height measuring tool altustM
article Number 2013.901
24 E-Series
LaB SCrEW
red-coated
NEW
implant connection NP 3,5 rP 4,3 WP 5,0 6,0
article Number E 60 L E 61 L E 61 L E 61 L
tEMPOrarY aButMENt
titanium Grade 5 CF
incl. abutment screw
recommended torque: 35 Ncm
NEW
implant connection NP 3,5 rP 4,3 WP 5,0
article Number E 3500 E 3510 E 3520
tYPE 1 = aNGLED OVEr FLat
DEtaiLED ViEW
Exact view of the direction of the angulation (indexing) of all angled abutments.
tYPE 2 = aNGLED OVEr CaM
Products indicated with ® are regi-stered brand names of respective manufactures.
the E-Series abutments are compatible with
Nobel Biocare replace Select® implants
E-Series
implant connection NP 3,5 rP 4,3 WP 5,0 6,0
25The E-Series abutments are compatible with Nobel Biocare Replace Select® Implantat E-Series
E-S
eri
es
No
bel
Bio
care
R
epla
ce S
elec
t®
implant connection NP 3,5 rP 4,3 WP 5,0 6,0
medentiCAD®
titaNiuM BaSE FOr BarS aND BriDGES rOtatiNG
Wax uP hEiGht 3,5 MM
titanium Grade 5 CF
incl. abutment screw
Gingiva height 0,3 mm
recommended torque: 35 Ncm
NEW
implant connection NP 3,5 rP 4,3 WP 5,0
article Number E 1500 E 1510 E 1520
medentiBASE®
MedentiBaSE aDhESiVE CaP FOr PaSSiVE-Fit
titanium adhesive Cap short E 4800 incl. Bridge screwPlastic adhesive Casing short E 4810 incl. Modelling screwtitanium adhesive base long E 4820 incl. Bridge screwPlastic adhesive base long E 4830 incl. Modelling screw
recommended torque: 15 Ncm
NEW
article Number E 4800 E 4810 E 4820 E 4830
MedentiBaSE Finisher connection geometry M 17 MedentiBaSE Finisher screw head M 18
Carbide
this is used to finish the fitting surfaces for the plastic cap E 4710 after casting. the finishers are used in the processing holder prosthetic M 04.
NEW
article Number M 17 M 18
medentiLOC®
attENtiON: to screw in the angled MedentiLOC abutments you need a special turning instrument Driver hex 1,26 mm M 03-7 or M 10-7.
MedentiLOC aButMENt
aNGLED 15° - tYPE 1
titanium Grade 5 CF
titanium Nitrit Coating
two-piece incl. Screw
implant connection NP 3,5 mm
recommended torque: 35 Ncm
NEW
Gingiva height (mm) 1 2 3 4 5
article Number E 2500-1 E 2600-1 E 2700-1 E 2800-1 E 2900-1
tYPE 2 = aNGLED OVEr CaM
26 E-Series
MedentiLOC aButMENt
aNGLED 15°- tYPE 2
titanium Grade 5 CF
titanium Nitrit Coating
two-piece incl. Screw
implant connection NP 3,5 mm
recommended torque: 35 Ncm
NEW
Gingiva height (mm) 1 2 3 4 5
article Number E 2500-2 E 2600-2 E 2700-2 E 2800-2 E 2900-2
MedentiLOC aButMENt
aNGLED 15° - tYPE 1
titanium Grade 5 CF
titanium Nitrit Coating
two-piece incl. Screw
implant connection rP 4,3 mm
recommended torque: 35 Ncm
NEW
Gingiva height (mm) 1 2 3 4 5
article Number E 2510-1 E 2610-1 E 2710-1 E 2810-1 E 2910-1
MedentiLOC aButMENt
aNGLED 15° - tYPE 2
titanium Grade 5 CF
titanium Nitrit Coating
two-piece incl. Screw
implant connection rP 4,3 mm
recommended torque: 35 Ncm
NEW
Gingiva height (mm) 1 2 3 4 5
article Number E 2510-2 E 2610-2 E 2710-2 E 2810-2 E 2910-2
turNiNG iNStruMENt FOr MEDENtiLOC- aButMENt
aNGLED
Lab Screwdriver/ratchet
NEW
type MedentiLOC angled
MedentiLOC angled
article Number M 03-7 M 10-7
GiNGiVa hEiGht MEaSuriNG tOOL aLtuStM
MedentiLOC
LaB aNaLOG
Stainless Steel
NEW
type Gingiva height measuring tool altustM
MedentiLOC angled
article Number 2013.901 57
SCrEW for MedentiLOC-aButMENt
aNGLED
recommended torque: 35 Ncm
NEW
implant connection NP 3,5 rP 4,3
article Number E 64 E 65
27The E-Series abutments are compatible with Nobel Biocare Replace Select® Implantat E-Series
E-S
eri
es
No
bel
Bio
care
R
epla
ce S
elec
t®
NOVaLOC™ PrOCESSiNG PaCkaGEMatrix housing titanium/PEEk retention insert white : retention value: light retention insert yellow : retention value: medium
retention insert green : retention value: strong
Mounting Collar Silicone
2 Pieces per package
incl. mounting insert
Material Matrix housing
titanium PEEk
article Number 2010.601 2010.611
28 E-Series
PLEASE NOTE: All OptilocTM abutments are available at the end of 2013.Find more details about OptiloctM abutments on page 82
OPtiLOC™ aButMENt
titanium Nitrit Coating
one-piece
implant connection NP 3,5 mm
recommended torque: 35 Ncm
NEW
Gingiva height (mm) 1 2 3 4 5
article Number E 5000 E 5100 E 5200 E 5300 E 5400
OPtiLOC™ aButMENt
titanium Nitrit Coating
one-piece
implant connection rP 4,3 mm
recommended torque: 35 Ncm
NEW
Gingiva height (mm) 1 2 3 4 5
article Number E 5010 E 5110 E 5210 E 5310 E 5410
OPtiLOC™ PrOCESSiNG PaCkaGE NEW
Matrix housing CoCr/PEEkretention insert white : retention value: light retention insert yellow : retention value: medium
retention insert green : retention value: strong
Mounting Collar Silicone
2 Pieces per package
Material Matrix housing
CoCr PEEk
article Number 2012.501 2012.511
turNiNG iNStruMENt
FOr OPtiLOCtM aButMENt
Lab Screwdriver/ratchet
type short long
article Number M 11-9 M 10-9
GiNGiVa hEiGht MEaSuriNG tOOL aLtuStM
NEW
type Gingiva height measuring tool altustM
article Number 2013.901
29The E-Series abutments are compatible with Nobel Biocare Replace Select® Implantat E-Series
E-S
eri
es
No
bel
Bio
care
R
epla
ce S
elec
t®
30 F-Series
tYPE 1 = aNGLED OVEr FLat
DEtaiLED ViEW
Exact view of the direction of the angulation (indexing) of all angled abutments.
tYPE 2 = aNGLED OVEr EDGE
Products indicated with ® are registered brand names of respective manufactures.
the F-Series abutments are compatible with
Nobel active® implantsNobel replace® Conical Connection implants
F-Series
LaB aNaLOG
Stainless Steel
NEW
implant connection 3,0
article Number F 52
aButMENt SCrEW
titanium ti6aL4V
uG
recommended torque 3,0: 15 Ncm
NEW
implant connection 3,0
article Number F 66
LaB SCrEW
red-coated
NEW
implant connection 3,0 NP 3,5 rP 4,3/5,0
article Number F 66 L F 60 L F 61 L
implant connection 3,0 NP 3,5 rP 4,3/5,0
31The F-Series abutments are compatible withNobel Active® Implants F-Series
F-Se
rie
sN
ob
el A
ctiv
e® +
No
bel
Rep
lace
®
Co
nic
al C
on
nec
tio
n
tEMPOrarY aButMENt
titanium Grade 5 CF
incl. abutment screw
recommended torque 3,0: 15 Ncm recommended torque NP/rP: 35 Ncm
NEW
implant connection 3,0 NP 3,5 rP 4,3/5,0
article Number F 3520 F 3500 F 3510
medentiCAD®
titaNiuM BaSE FOr ZirkONiuM aButMENt 2. GENEratiON
Wax uP hEiGht 3,5 MM
titanium
incl. abutment screw
recommended torque 3,0: 15 Ncm
NEW
Gingiva height (mm) 0,65
implant connection 3,0
article Number F 1020
titaNiuM BaSE FOr ZirkONiuM aButMENt 2. GENEratiON
Wax uP hEiGht 5,5 MM
titanium
incl. abutment screw
recommended torque 3,0: 15 Ncm
NEW
Gingiva height (mm) 0,65
implant connection 3,0
article Number F 1120
titaNiuM BaSE FOr BarS aND BriDGES rOtatiNG
Wax uP hEiGht 3,5 MM
titanium Grade 5 CF
incl. abutment screw
Gingiva height 0,65 mm
recommended torque 3,0: 15 Ncm recommended torque NP/rP: 35 Ncm
NEW
implant connection 3,0 NP 3,5 rP 4,3/5,0
article Number F 1520 F 1500 F 1510
SCaNBODY 2. GENEratiON
3,0: titanium, special-coated incl. Screw
for titanium base 2. Generation and MedentiCaD abutment
for intra-oral scanning
sterilisable
NEW
implant connection 3,0
article Number F 1420
implant connection 3,0 NP 3,5 rP 4,3/5,0
tYPE 2 = aNGLED OVEr EDGE
32 F-Series
implant connection 3,0 NP 3,5 rP 4,3/5,0
MedentiCaD-aButMENt
the customised, single-part abutment incl. abutment screw
titanium Grade 5 CF
recommended torque 3,0: 15 Ncm
NEW
implant connection 3,0
article Number F 9020
NEWMedentiCaD Wax uP BaSE
incl. Screw incl. Scan
Steel
attENtiON: For use on the Model only!
implant connection 3,0
article Number F 9120
medentiBASE®
MedentiBaSE aDhESiVE CaP FOr PaSSiVE-Fit
titanium adhesive Cap short F 4800 incl. Bridge screwPlastic adhesive Casing short F 4810 incl. Modelling screwtitanium adhesive base long F 4820 incl. Bridge screwPlastic adhesive base long F 4830 incl. Modelling screw
recommended torque: 15 Ncm
NEW
article Number F 4800 F 4810 F 4820 F 4830
MedentiBaSE Finisher connection geometry M 17 MedentiBaSE Finisher screw head M 18
Carbide
this is used to finish the fitting surfaces for the plastic cap F 4710 after casting. the finishers are used in the processing holder prosthetic M 04.
NEW
article Number M 17 M 18
33The F-Series abutments are compatible withNobel Active® Implants F-Series
F-Se
rie
sN
ob
el A
ctiv
e® +
No
bel
Rep
lace
®
Co
nic
al C
on
nec
tio
n
medentiLOC®
attENtiON: to screw in the angled MedentiLOC abutments you need a special turning instrument Driver hex 1,26 mm M 03-7 or M 10-7.
MedentiLOC aButMENt
aNGLED 15° - tYPE 1
titanium Grade 5 CF
titanium Nitrit Coating
two-piece incl. Screw
implant connection NP 3,5 mm
recommended torque: 35 Ncm
NEW
Gingiva height (mm) 1 2 3 4 5
article Number F 2500-1 F 2600-1 F 2700-1 F 2800-1 F 2900-1
MedentiLOC aButMENt
aNGLED 15° - tYPE 1
titanium Grade 5 CF
titanium Nitrit Coating
two-piece incl. Screw
implant connection rP 4,3/5,0 mm
recommended torque: 35 Ncm
NEW
Gingiva height (mm) 1 2 3 4 5
article Number F 2510-1 F 2610-1 F 2710-1 F 2810-1 F 2910-1
turNiNG iNStruMENt FOr MEDENtiLOC- aButMENt
aNGLED
Lab Screwdriver/ratchet
type MedentiLOC angled
MedentiLOC angled
article Number M 03-7 M 10-7
GiNGiVa hEiGht MEaSuriNG tOOL aLtuStM
MedentiLOC
LaB aNaLOG
Stainless Steel
NEW
type Gingiva height measuring tool altustM
MedentiLOC angled
article Number 2013.901 57
SCrEW for MedentiLOC-aButMENt
aNGLED
recommended torque NP/rP: 35 Ncm
implant connection NP 3,5 rP 4,3/5,0
article Number F 64 F 65
34 F-Series
NOVaLOC™ PrOCESSiNG PaCkaGEMatrix housing titanium/PEEk retention insert white : retention value: light retention insert yellow : retention value: medium
retention insert green : retention value: strong
Mounting Collar Silicone
2 Pieces per package
incl. mounting insert
Material Matrix housing
titanium PEEk
article Number 2010.601 2010.611
35The F-Series abutments are compatible withNobel Active® Implants F-Series
F-Se
rie
sN
ob
el A
ctiv
e® +
No
bel
Rep
lace
®
Co
nic
al C
on
nec
tio
n
PLEASE NOTE: All OptilocTM abutments are available at the end of 2013.Find more details about OptiloctM abutments on page 82
OPtiLOC™ aButMENt
titanium Nitrit Coating
one-piece
implant connection NP 3,5 mm
recommended torque: 35 Ncm
NEW
Gingiva height (mm) 1 2 3 4 5
article Number F 5000 F 5100 F 5200 F 5300 F 5400
OPtiLOC™ aButMENt
titanium Nitrit Coating
one-piece
implant connection rP 4,3/5,0 mm
recommended torque: 35 Ncm
NEW
Gingiva height (mm) 1 2 3 4 5
article Number F 5010 F 5110 F 5210 F 5310 F 5410
OPtiLOC™ PrOCESSiNG PaCkaGE NEW
Matrix housing CoCr/PEEkretention insert white : retention value: light retention insert yellow : retention value: medium
retention insert green : retention value: strong
Mounting Collar Silicone
2 Pieces per package
Material Matrix housing
CoCr PEEk
article Number 2012.501 2012.511
turNiNG iNStruMENt
FOr OPtiLOCtM aButMENt
Lab Screwdriver/ratchet
type short long
article Number M 11-9 M 10-9
GiNGiVa hEiGht MEaSuriNG tOOL aLtuStM
NEW
type Gingiva height measuring tool altustM
article Number 2013.901
36 H-Series
tYPE 1 = aNGLED OVEr FLat
DEtaiLED ViEW
Exact view of the direction of the angulation (indexing) of all angled abutments.
tYPE 2 = aNGLED OVEr EDGE
Products indicated with ® are regi-stered brand names of respective manufactures.
the h-Series abutments are compatible with
Biomet 3i Certain® implants
h-Series
LaB SCrEW
red-coated
NEW
implant connection 3,4 4,1 5,0
article Number h 60 L h 60 L h 60 L
tEMPOrarY aButMENt
titanium Grade 5 CF
incl. abutment screw
recommended torque: 20 Ncm
NEW
implant connection 3,4 4,1
article Number h 3500 h 3510
implant connection 3,4 4,1 5,0
37The H-Series abutments are compatible withBiomet 3i Certain® Implants H-Series
H-S
eri
es
Bio
met
3i C
erta
in®
implant connection 3,4 4,1 5,0
medentiCAD®
titaNiuM BaSE FOr BarS aND BriDGES rOtatiNG
Wax uP hEiGht 3,5 MM
titanium Grade 5 CF
incl. abutment screw
Gingiva height 0,3 mm
recommended torque: 20 Ncm
NEW
implant connection 3,4 4,1 5,0
article Number h 1500 h 1510 h 1520
medentiBASE®
MedentiBaSE aDhESiVE CaP FOr PaSSiVE-Fit
titanium adhesive Cap short h 4800 incl. Bridge screwPlastic adhesive Casing short h 4810 incl. Modelling screwtitanium adhesive base long h 4820 incl. Bridge screwPlastic adhesive base long h 4830 incl. Modelling screw
recommended torque: 15 Ncm
NEW
article Number h 4800 h 4810 h 4820 h 4830
MedentiBaSE Finisher connection geometry M 17 MedentiBaSE Finisher screw head M 18
Carbide
this is used to finish the fitting surfaces for the plastic cap h 4710 after casting. the finishers are used in the processing holder prosthetic M 04.
NEW
article Number M 17 M 18
medentiLOC®
GiNGiVa hEiGht MEaSuriNG tOOL aLtuStM
NEW
type Gingiva height measuring tool altustM
article Number 2013.901
tYPE 2 = aNGLED OVEr EDGE
38 H-Series
NOVaLOC™ PrOCESSiNG PaCkaGEMatrix housing titanium/PEEk retention insert white : retention value: light retention insert yellow : retention value: medium
retention insert green : retention value: strong
Mounting Collar Silicone
2 Pieces per package
incl. mounting insert
Material Matrix housing
titanium PEEk
article Number 2010.601 2010.611
39The H-Series abutments are compatible withBiomet 3i Certain® Implants H-Series
H-S
eri
es
Bio
met
3i C
erta
in®
PLEASE NOTE: All OptilocTM abutments are available at the end of 2013.Find more details about OptiloctM abutments on page 82
OPtiLOC™ aButMENt
titanium Nitrit Coating
one-piece
implant connection 3,4 mm
recommended torque: 20 Ncm
NEW
Gingiva height (mm) 1 2 3 4 5
article Number h 5000 h 5100 h 5200 h 5300 h 5400
OPtiLOC™ aButMENt
titanium Nitrit Coating
one-piece
implant connection 4,1 mm
recommended torque: 20 Ncm
NEW
Gingiva height (mm) 1 2 3 4 5
article Number h 5010 h 5110 h 5210 h 5310 h 5410
OPtiLOC™ PrOCESSiNG PaCkaGE NEW
Matrix housing CoCr/PEEkretention insert white : retention value: light retention insert yellow : retention value: medium
retention insert green : retention value: strong
Mounting Collar Silicone
2 Pieces per package
Material Matrix housing
CoCr PEEk
article Number 2012.501 2012.511
turNiNG iNStruMENt
FOr OPtiLOCtM aButMENt
Lab Screwdriver/ratchet
type short long
article Number M 11-9 M 10-9
GiNGiVa hEiGht MEaSuriNG tOOL aLtuStM
NEW
type Gingiva height measuring tool altustM
article Number 2013.901
40 I-Series
tYPE 1 = aNGLED OVEr FLat
DEtaiLED ViEW
Exact view of the direction of the angulation (indexing) of all angled abutments.
tYPE 2 = aNGLED OVEr EDGE
Products indicated with ® are regi-stered brand names of respective manufactures.
the i-Series abutments are compatible with
Biomet 3i® outer hex implants
i-Series
LaB SCrEW
red-coated
NEW
implant connection 3,4 4,1 5,0
article Number i 61 L i 61 L i 61 L
tEMPOrarY aButMENt
titanium Grade 5 CF
incl. abutment screw
recommended torque: 35 Ncm
NEW
implant connection 3,4 4,1
article Number i 3500 i 3510
implant connection 3,4 4,1 5,0
41The I-Series abutments are compatible withBiomet 3i® outer hex Implants I-Series
I-Se
rie
sB
iom
et 3
i® o
ute
r h
ex
medentiCAD®
titaNiuM BaSE FOr BarS aND BriDGES rOtatiNG
Wax uP hEiGht 3,5 MM
titanium Grade 5 CF
incl. abutment screw
Gingiva height 0,6 mm
recommended torque: 35 Ncm
NEW
implant connection 3,4 4,1 5,0
article Number i 1500 i 1510 i 1520
medentiBASE®
MedentiBaSE aDhESiVE CaP FOr PaSSiVE-Fit
titanium adhesive Cap short i 4800 incl. Bridge screwPlastic adhesive Casing short i 4810 incl. Modelling screwtitanium adhesive base long i 4820 incl. Bridge screwPlastic adhesive base long i 4830 incl. Modelling screw
recommended torque: 15 Ncm
NEW
article Number i 4800 i 4810 i 4820 i 4830
MedentiBaSE Finisher connection geometry M 17 MedentiBaSE Finisher screw head M 18
Carbide
this is used to finish the fitting surfaces for the plastic cap i 4710 after casting. the finishers are used in the processing holder prosthetic M 04.
NEW
article Number M 17 M 18
medentiLOC®
GiNGiVa hEiGht MEaSuriNG tOOL aLtuStM
NEW
type Gingiva height measuring tool altustM
article Number 2013.901
implant connection 3,4 4,1 5,0
tYPE 2 = aNGLED OVEr EDGE
42 I-Series
NOVaLOC™ PrOCESSiNG PaCkaGEMatrix housing titanium/PEEk retention insert white : retention value: light retention insert yellow : retention value: medium
retention insert green : retention value: strong
Mounting Collar Silicone
2 Pieces per package
incl. mounting insert
Material Matrix housing
titanium PEEk
article Number 2010.601 2010.611
43The I-Series abutments are compatible withBiomet 3i® outer hex Implants I-Series
I-Se
rie
sB
iom
et 3
i® o
ute
r h
ex
PLEASE NOTE: All OptilocTM abutments are available at the end of 2013.Find more details about OptiloctM abutments on page 82
OPtiLOC™ aButMENt
titanium Nitrit Coating
one-piece
implant connection 3,4 mm
recommended torque: 35 Ncm
NEW
Gingiva height (mm) 1 2 3 4 5
article Number i 5000 i 5100 i 5200 i 5300 i 5400
OPtiLOC™ aButMENt
titanium Nitrit Coating
one-piece
implant connection 4,1 mm
recommended torque: 35 Ncm
NEW
Gingiva height (mm) 1 2 3 4 5
article Number i 5010 i 5110 i 5210 i 5310 i 5410
OPtiLOC™ PrOCESSiNG PaCkaGE NEW
Matrix housing CoCr/PEEkretention insert white : retention value: light retention insert yellow : retention value: medium
retention insert green : retention value: strong
Mounting Collar Silicone
2 Pieces per package
Material Matrix housing
CoCr PEEk
article Number 2012.501 2012.511
turNiNG iNStruMENt
FOr OPtiLOCtM aButMENt
Lab Screwdriver/ratchet
type short long
article Number M 11-9 M 10-9
GiNGiVa hEiGht MEaSuriNG tOOL aLtuStM
NEW
type Gingiva height measuring tool altustM
article Number 2013.901
44 K-Series
tYPE 1 = aNGLED OVEr FLat
DEtaiLED ViEW
Exact view of the direction of the angulation (indexing) of all angled abutments.
tYPE 2 = aNGLED OVEr EDGE
Products indicated with ® are reg-istered brand names of respective manufactures.
the k-Series abutments are compatible with
Nobel Biocare Brånemark® implants
k-Serie
LaB SCrEW
red-coated
NEW 3,80 Eur 3,80 Eur 3,80 Eur
implant connection 3,5 4,1 5,1
article Number k 60 L k 61 L k 62 L
tEMPOrarY aButMENt
titanium Grade 5 CF
incl. abutment screw
recommended torque: 35 Ncm
NEW
implant connection 3,5 4,1
article Number k 3500 k 3510
implant connection 3,5 4,1 5,1
45The K-Series abutments are compatible withNobel Biocare Brånemark® Implants K-Series
K-S
eri
es
No
bel
Bio
care
Brå
nem
ark®
implant connection 3,5 4,1 5,1
medentiCAD®
titaNiuM BaSE FOr BarS aND BriDGES rOtatiNG
Wax uP hEiGht 3,5 MM
titanium Grade 5 CF
incl. abutment screw
Gingiva height 0,6 mm
recommended torque: 35 Ncm
NEW
implant connection 3,5 4,1 5,1
article Number k 1500 k 1510 k 1520
medentiBASE®
MedentiBaSE aDhESiVE CaP FOr PaSSiVE-Fit
titanium adhesive Cap short k 4800 incl. Bridge screwPlastic adhesive Casing short k 4810 incl. Modelling screwtitanium adhesive base long k 4820 incl. Bridge screwPlastic adhesive base long k 4830 incl. Modelling screw
recommended torque: 15 Ncm
NEW
article Number k 4800 k 4810 k 4820 k 4830
MedentiBaSE Finisher connection geometry M 17 MedentiBaSE Finisher screw head M 18
Carbide
this is used to finish the fitting surfaces for the plastic cap k 4710 after casting. the finishers are used in the processing holder prosthetic M 04.
NEW
article Number M 17 M 18
medentiLOC®
GiNGiVa hEiGht MEaSuriNG tOOL aLtuStM
NEW
type Gingiva height measuring tool altustM
article Number 2013.901
tYPE 2 = aNGLED OVEr EDGE
46 K-Series
NOVaLOC™ PrOCESSiNG PaCkaGEMatrix housing titanium/PEEk retention insert white : retention value: light retention insert yellow : retention value: medium
retention insert green : retention value: strong
Mounting Collar Silicone
2 Pieces per package
incl. mounting insert
Material Matrix housing
titanium PEEk
article Number 2010.601 2010.611
47The K-Series abutments are compatible withNobel Biocare Brånemark® Implants K-Series
K-S
eri
es
No
bel
Bio
care
Brå
nem
ark®
PLEASE NOTE: All OptilocTM abutments are available at the end of 2013.Find more details about OptiloctM abutments on page 82
OPtiLOC™ aButMENt
titanium Nitrit Coating
one-piece
implant connection 3,5 mm
recommended torque: 35 Ncm
NEW
Gingiva height (mm) 1 2 3 4 5
article Number k 5000 k 5100 k 5200 k 5300 k 5400
OPtiLOC™ aButMENt
titanium Nitrit Coating
one-piece
implant connection 4,1 mm
recommended torque: 35 Ncm
NEW
Gingiva height (mm) 1 2 3 4 5
article Number k 5010 k 5110 k 5210 k 5310 k 5410
OPtiLOC™ PrOCESSiNG PaCkaGE NEW
Matrix housing CoCr/PEEkretention insert white : retention value: light retention insert yellow : retention value: medium
retention insert green : retention value: strong
Mounting Collar Silicone
2 Pieces per package
Material Matrix housing
CoCr PEEk
article Number 2012.501 2012.511
turNiNG iNStruMENt
FOr OPtiLOCtM aButMENt
Lab Screwdriver/ratchet
type short long
article Number M 11-9 M 10-9
GiNGiVa hEiGht MEaSuriNG tOOL aLtuStM
NEW
type Gingiva height measuring tool altustM
article Number 2013.901
48 L-Series
tYPE 1 = aNGLED OVEr FLat
DEtaiLED ViEW
Exact view of the direction of the angulation (indexing) of all angled abutments.
tYPE 2 = aNGLED OVEr EDGE
Products indicated with ® are regi-stered brand names of respective manufactures.
the L-Series abutments are compatible with
Straumann Bone Level® implants
L-Series
aButMENt SCrEW
titanium ti6aL4V
torx t6
recommended torque: 35 Ncm
* L 63 for: L 310 r, L 1510
NEW
implant connection NC 3,3 rC 4,1/4,8 rC 4,1/4,8
article Number L 60 L 60 L 63*
LaB SCrEW
red-coated
NEW
implant connection NC 3,3 rC 4,1/4,8
article Number L 60 L L 60 L
tEMPOrarY aButMENt
titanium Grade 5 CF
incl. abutment screw
recommended torque: 35 Ncm
NEW
implant connection NC 3,3 rC 4,1/4,8
article Number L 3500 L 3510
implant connection NC 3,3 rC 4,1/4,8
49The L-Series abutments are compatible withStraumann Bone Level® Implants L-Series
L-Se
rie
sSt
rau
man
n B
on
e Le
vel®
implant connection NC 3,3 rC 4,1/4,8
tYPE 2 = aNGLED OVEr EDGE
medentiCAD®
titaNiuM BaSE FOr BarS aND BriDGES rOtatiNG
Wax uP hEiGht 3,5 MM
titanium Grade 5 CF
incl. abutment screw
recommended torque: 35 Ncm
NEW
implant connection NC 3,3 rC 4,1/4,8
Gingiva height (mm) 1,0 0,8
article Number L1500 L 1510
medentiBASE®
MedentiBaSE aDhESiVE CaP FOr PaSSiVE-Fit
titanium adhesive Cap short L 4800 incl. Bridge screwPlastic adhesive Casing short L 4810 incl. Modelling screwtitanium adhesive base long L 4820 incl. Bridge screwPlastic adhesive base long L 4830 incl. Modelling screw
recommended torque: 15 Ncm
NEW
article Number L 4800 L 4810 L 4820 L 4830
MedentiBaSE Finisher connection geometry M 17 MedentiBaSE Finisher screw head M 18
Carbide
this is used to finish the fitting surfaces for the plastic cap L 4710 after casting. the finishers are used in the processing holder prosthetic M 04.
NEW
article Number M 17 M 18
medentiLOC®
attENtiON: to screw in the angled MedentiLOC abutments you need a special turning instrument Driver hex 1,26 mm M 03-7 or M 10-7.
MedentiLOC aButMENt
aNGLED 15° - tYPE 1
titanium Grade 5 CF
titanium Nitrit Coating
two-piece incl. Screw
implant connection NC 3,3 mm
recommended torque: 35 Ncm
NEW
Gingiva height (mm) 1 2 3 4 5
article Number L 2500-1 L 2600-1 L 2700-1 L 2800-1 L 2900-1
MedentiLOC aButMENt
aNGLED 15°- tYPE 2
titanium Grade 5 CF
titanium Nitrit Coating
two-piece incl. Screw
implant connection NC 3,3 mm
recommended torque: 35 Ncm
NEW
Gingiva height (mm) 1 2 3 4 5
article Number L 2500-2 L 2600-2 L 2700-2 L 2800-2 L 2900-2
50 L-Series
MedentiLOC aButMENt
aNGLED 15°- tYPE 1
titanium Grade 5 CF
titanium Nitrit Coating
two-piece incl. Screw
implant connection rC 4,1/4,8 mm
recommended torque: 35 Ncm
NEW
Gingiva height (mm) 1 2 3 4 5
article Number L 2510-1 L 2610-1 L 2710-1 L 2810-1 L 2910-1
MedentiLOC aButMENt
aNGLED 15°- tYPE 2
titanium Grade 5 CF
titanium Nitrit Coating
two-piece incl. Screw
implant connection rC 4,1/4,8 mm
recommended torque: 35 Ncm
NEW
Gingiva height (mm) 1 2 3 4 5
article Number L 2510-2 L 2610-2 L 2710-2 L 2810-2 L 2910-2
turNiNG iNStruMENt FOr MEDENtiLOC- aButMENt
aNGLED
Lab Screwdriver/ratchet
type MedentiLOC angled
MedentiLOC angled
article Number M 03-7 M 10-7
GiNGiVa hEiGht MEaSuriNG tOOL aLtuStM
MedentiLOC
LaB aNaLOG
Stainless Steel
NEW
type Gingiva height measuring tool altustM
MedentiLOC angled
article Number 2013.901 57
SCrEW for MedentiLOC-aButMENt
aNGLED
recommended torque: 35 Ncm
implant connection NC 3,3 rC 4,1/4,8
article Number L 62 L 62
NOVaLOC™ PrOCESSiNG PaCkaGEMatrix housing titanium/PEEk retention insert white : retention value: light retention insert yellow : retention value: medium
retention insert green : retention value: strong
Mounting Collar Silicone
2 Pieces per package
incl. mounting insert
Material Matrix housing
titanium PEEk
article Number 2010.601 2010.611
51The L-Series abutments are compatible withStraumann Bone Level® Implants L-Series
L-Se
rie
sSt
rau
man
n B
on
e Le
vel®
PLEASE NOTE: All OptilocTM abutments are available at the end of 2013.Find more details about OptiloctM abutments on page 82
OPtiLOC™ aButMENt
titanium Nitrit Coating
one-piece
implant connection NC 3,3 mm
recommended torque: 35 Ncm
NEW
Gingiva height (mm) 1 2 3 4 5
article Number L 5000 L 5100 L 5200 L 5300 L 5400
OPtiLOC™ aButMENt
titanium Nitrit Coating
one-piece
implant connection rC 4,1/4,8 mm
recommended torque: 35 Ncm
NEW
Gingiva height (mm) 1 2 3 4 5
article Number L 5010 L 5110 L 5210 L 5310 L 5410
OPtiLOC™ PrOCESSiNG PaCkaGE NEW
Matrix housing CoCr/PEEkretention insert white : retention value: light retention insert yellow : retention value: medium
retention insert green : retention value: strong
Mounting Collar Silicone
2 Pieces per package
Material Matrix housing
CoCr PEEk
article Number 2012.501 2012.511
turNiNG iNStruMENt
FOr OPtiLOCtM aButMENt
Lab Screwdriver/ratchet
type short long
article Number M 11-9 M 10-9
GiNGiVa hEiGht MEaSuriNG tOOL aLtuStM
NEW
type Gingiva height measuring tool altustM
article Number 2013.901
52 N-Series
tYPE 1 = aNGLED OVEr FLat
DEtaiLED ViEW
Exact view of the direction of the angulation (indexing) of all angled abutments.
tYPE 2 = aNGLED OVEr EDGE
Products indicated with ® are regi-stered brand names of respective manufactures.
the N-Series abutments are compatible with
Straumann SynOcta® implants
N-Serie
aButMENt SCrEW
titanium ti6aL4V
torx t6
recommended torque: 35 Ncm
* N 62 for:
N 310, N 320, N 410, N 420, N 810, N 820, N 910, N 920, N 1000, N 1010, N 1020, N 1100, N 1110, N 1120
NEW
implant connection NNC 3,5 NN 3,5 rN 4,8 WN 6,5 rN 4,8 WN 6,5
article Number N 65 N 60 N 61 N 61 N 62*
LaB SCrEW
red-coated
* N 62 L for:N 310, N 320, N 410, N 420, N 810, N 820,N 910, N 920, N 1000, N 1010, N 1020,N 1100, N 1110, N 1120
NEW
implant connection NNC NN 3,5 rN 4,8 WN 6,5 rN 4,8 WN 6,5
article Number N 65 L N 60 L N 61 L N 61 L N 62 L*
tEMPOrarY aButMENt
titanium Grade 5 CF
incl. abutment screw
recommended torque: 35 Ncm
NEW
implant connection NNC 3,5 NN 3,5 rN 4,8 WN 6,5
article Number N 3530 N 3500 N 3510 N 3520
implant connection NNC 3,5 NN 3,5 rN 4,8 WN 6,5
53The N-Series abutments are compatible withStraumann SynOcta® Implants N-Series
N-S
eri
es
Stra
um
ann
Syn
Oct
a®
implant connection NNC 3,5 NN 3,5 rN 4,8 WN 6,5 WN 6,5
medentiCAD®
titaNiuM BaSE FOr BarS aND BriDGES rOtatiNG
Wax uP hEiGht 3,5 MM
titanium Grade 5 CF
incl. abutment screw
recommended torque: 35 Ncm
NEW
implant connection NNC 3,5 rN 4,8 WN 6,5
article Number N 1530 N 1510 N 1520
medentiBASE®
MedentiBaSE NNC 3,5
MedentiBaSE aDhESiVE CaP FOr PaSSiVE-Fit
titanium adhesive Cap short NNC 4800 incl. Bridge screwPlastic adhesive Casing short NNC 4810 incl. Modelling screwtitanium adhesive base long NNC 4820 incl. Bridge screwPlastic adhesive base long NNC 4830 incl. Modelling screw
recommended torque: 15 Ncm
NEW
article Number NNC 4800 NNC 4810 NNC 4820 NNC 4830
MedentiBaSE Finisher connection geometry M 17 MedentiBaSE Finisher screw head M 18
Carbide
this is used to finish the fitting surfaces for the plastic cap NNC 4710 after casting. the finishers are used in the processing holder prosthetic M 04.
NEW
article Number M 17 M 18
MedentiBaSE rN 4,8
MedentiBaSE aDhESiVE CaP FOr PaSSiVE-Fit
titanium adhesive base N 4800 incl. Bridge screwPlastic adhesive base N 4810 incl. Modelling screw
recommended torque: 15 Ncm
NEW
article Number N 4800 N 4810
MedentiBaSE Finisher connection geometry rN 4,8
MedentiBaSE Finisher screw head
Carbide
this is used to finish the fitting surfaces for the plastic cap N 4710 after casting. the finishers are used in the processing holder prosthetic M 04.
NEW
connection geometry
screw head
article Number M 19 M 18
tYPE 2 = aNGLED OVEr EDGE
54 N-Series
medentiLOC®
attENtiON: to screw in the angled MedentiLOC abutments you need a special turning instrument Driver hex 1,26 mm M 03-7 or M 10-7.
MedentiLOC aButMENt
aNGLED 15° - tYPE 1
titanium Grade 5 CF
titanium Nitrit Coating
two-piece incl. Screw
implant connection rN 4,8 mm
recommended torque: 35 Ncm
NEW
Gingiva height (mm) 0,5 1,5 2,5 3,5 4,5
article Number N 2510 N 2610 N 2710 N 2810 N 2910
turNiNG iNStruMENt FOr MEDENtiLOC- aButMENt
aNGLED
Lab Screwdriver/ratchet
type MedentiLOC angled
MedentiLOC angled
article Number M 03-7 M 10-7
GiNGiVa hEiGht MEaSuriNG tOOL aLtuStM
MedentiLOC
LaB aNaLOG
Stainless Steel
NEW
type Gingiva height measuring tool altustM
MedentiLOC angled
article Number 2013.901 57
SCrEW for MedentiLOC-aButMENt
aNGLED
recommended torque: 35 Ncm
implant connection rN 4,8
article Number N 64
NOVaLOC™ PrOCESSiNG PaCkaGEMatrix housing titanium/PEEk retention insert white : retention value: light retention insert yellow : retention value: medium
retention insert green : retention value: strong
Mounting Collar Silicone
2 Pieces per package
incl. mounting insert
Material Matrix housing
titanium PEEk
article Number 2010.601 2010.611
55The N-Series abutments are compatible withStraumann SynOcta® Implants N-Series
N-S
eri
es
Stra
um
ann
Syn
Oct
a®
PLEASE NOTE: All OptilocTM abutments are available at the end of 2013.Find more details about OptiloctM abutments on page 82
OPtiLOC™ aButMENt
titanium Nitrit Coating
one-piece
implant connection NNC 3,5 mm
recommended torque: 35 Ncm
NEW
Gingiva height (mm) 0,5 1,5 2,5 3,5 4,5
article Number N 5030 N 5130 N 5230 N 5330 N 5430
OPtiLOC™ aButMENt
titanium Nitrit Coating
one-piece
implant connection rN 4,8 mm
recommended torque: 35 Ncm
NEW
Gingiva height (mm) 0,5 1,5 2,5 3,5 4,5
article Number N 5010 N 5110 N 5210 N 5310 N 5410
OPtiLOC™ PrOCESSiNG PaCkaGE NEW
Matrix housing CoCr/PEEkretention insert white : retention value: light retention insert yellow : retention value: medium
retention insert green : retention value: strong
Mounting Collar Silicone
2 Pieces per package
Material Matrix housing
CoCr PEEk
article Number 2012.501 2012.511
turNiNG iNStruMENt
FOr OPtiLOCtM aButMENt
Lab Screwdriver/ratchet
type short long
article Number M 11-9 M 10-9
GiNGiVa hEiGht MEaSuriNG tOOL aLtuStM
NEW
type Gingiva height measuring tool altustM
article Number 2013.901
56 R-Series
the r-Series abutments are compatible with
Zimmer tapered Screw-Vent® implantsMiS® SEVEN implants (hexagon socket)Biohorizons® implants (hexagon socket)
r-Series
tYPE 1 = aNGLED OVEr FLat tYPE 2 = aNGLED OVEr EDGE
COMPariSON Chart Zimmer tapered Screw-Vent® / MiS® Seven / Biohorizons®
Products indicated with ® are registered brand names of respective manufactures.
Biohorizons® Platform 3,0 mm
Platform 3,5 mm
Platform 4,5 mm
Platform 5,7 mm
Implant Ø 3,00 3,80 4,60 5,80
Lab analog Ø 3,00 3,50 4,50 5,70article Number tP3ia SYia SGia SBiaimplant connection
Medentika R-Series Lab analog
XX 3,50 4,50 5,70
article Number xx r 50 r 51 r 52
Zimmer tapered Screw-Vent®
Platform 3,5 mm
Platform 4,5 mm
Platform 5,7 mm
Implant Ø 3,70 4,10 4,70 6,00
Lab analog Ø 3,50 3,50 4,50 5,70article Number ia3 ia3 ia4 ia5
implant connection
Medentika R-Series Lab analog
3,5 3,5 4,5 5,7
article Number r 50 r 50 r 51 r 52
MiS® Seven Narrow-Platform
Standard-Platform
Wide-Platform
Implant Ø 3,30 3,30 3,75 4,20 5,00 6,00
Lab analog Ø 3,30 4,20 4,20 4,20 4,50 4,50article Number MN-rSM10 MD-rSM10 MD-rSM10 MD-rSM10 MW-rSM10 MW-rSM10
implant connection
Medentika R-Series Lab analog
XX 3,50 3,50 3,50 4,50 4,50
article Number xx r 50 r 50 r 50 r 51 r 51
57Zimmer Tapered Screw-Vent® ImplantsMIS® SEVEN Implants (hexagon socket)BioHorizons® Implants (hexagon socket)
The R-Series abutmentsare compatible with R-Series
R-S
eri
es
Zim
mer
Tap
ered
Scr
ew-V
ent®
MIS
® S
even
, B
ioH
ori
zon
s®
tYPE 2 = aNGLED OVEr EDGE
LaB SCrEW
red-coated
NEW
implant connection 3,5 4,5 5,7
article Number r 60 L r 60 L r 60 L
tEMPOrarY aButMENt
titanium Grade 5 CF
incl. abutment screw
recommended torque: 30 Ncm
NEW
implant connection 3,5 4,5
article Number r 3500 r 3510
medentiCAD®
titaNiuM BaSE FOr BarS aND BriDGES rOtatiNG
Wax uP hEiGht 3,5 MM
titanium Grade 5 CF
incl. abutment screw
Gingiva height 0,3 mm
recommended torque: 30 Ncm
NEW
implant connection 3,5 4,5 5,7
article Number r 1500 r 1510 r 1520
medentiBASE®
MedentiBaSE aDhESiVE CaP FOr PaSSiVE-Fit
titanium adhesive Cap short r 4800 incl. Bridge screwPlastic adhesive Casing short r 4810 incl. Modelling screwtitanium adhesive base long r 4820 incl. Bridge screwPlastic adhesive base long r 4830 incl. Modelling screw
recommended torque: 15 Ncm
NEW
article Number r 4800 r 4810 r 4820 r 4830
implant connection 3,5 4,5 5,7
MedentiBaSE Finisher connection geometry M 17 MedentiBaSE Finisher screw head M 18
Carbide
this is used to finish the fitting surfaces for the plastic cap r 4710 after casting. the finishers are used in the processing holder prosthetic M 04.
NEW
article Number M 17 M 18
58 R-Series
medentiLOC®
attENtiON: to screw in the angled MedentiLOC abutments you need a special turning instrument Driver hex 1,26 mm M 03-7 or M 10-7.
MedentiLOC aButMENt
aNGLED 15° - tYPE 1
titanium Grade 5 CF
titanium Nitrit Coating
two-piece incl. Screw
implant connection 3,5 mm
recommended torque: 30 Ncm
NEW
Gingiva height (mm) 1 2 3 4 5
article Number r 2500-1 r 2600-1 r 2700-1 r 2800-1 r 2900-1
turNiNG iNStruMENt FOr MEDENtiLOC- aButMENt
aNGLED
Lab Screwdriver/ratchet
type MedentiLOC angled
MedentiLOC angled
article Number M 03-7 M 10-7
GiNGiVa hEiGht MEaSuriNG tOOL aLtuStM
MedentiLOC
LaB aNaLOG
Stainless Steel
NEW
type Gingiva height measuring tool altustM
MedentiLOC angled
article Number 2013.901 57
SCrEW for MedentiLOC-aButMENt
aNGLED
recommended torque: 30 Ncm
implant connection 3,5 4,5 5,7
article Number r 62 r 62 r 62
NOVaLOC™ PrOCESSiNG PaCkaGEMatrix housing titanium/PEEk retention insert white : retention value: light retention insert yellow : retention value: medium
retention insert green : retention value: strong
Mounting Collar Silicone
2 Pieces per package
incl. mounting insert
Material Matrix housing titanium PEEk
article Number 2010.601 2010.611
59Zimmer Tapered Screw-Vent® ImplantsMIS® SEVEN Implants (hexagon socket)BioHorizons® Implants (hexagon socket)
The R-Series abutmentsare compatible with R-Series
R-S
eri
es
Zim
mer
Tap
ered
Scr
ew-V
ent®
MIS
® S
even
, B
ioH
ori
zon
s®
PLEASE NOTE: All OptilocTM abutments are available at the end of 2013.Find more details about OptiloctM abutments on page 82
OPtiLOCtM aButMENt
titanium Nitrit Coating
one-piece
implant connection 3,5 mm
recommended torque: 30 Ncm
NEW
Gingiva height (mm) 1 2 3 4 5
article Number r 5000 r 5100 r 5200 r 5300 r 5400
OPtiLOC™ PrOCESSiNG PaCkaGE NEW
Matrix housing CoCr/PEEkretention insert white : retention value: light retention insert yellow : retention value: medium
retention insert green : retention value: strong
Mounting Collar Silicone
2 Pieces per package
Material Matrix housing CoCr PEEk
article Number 2012.501 2012.511
turNiNG iNStruMENt
FOr OPtiLOCtM aButMENt
Lab Screwdriver/ratchet
type short long
article Number M 11-9 M 10-9
GiNGiVa hEiGht MEaSuriNG tOOL aLtuStM
NEW
type Gingiva height measuring tool altustM
article Number 2013.901
60 S-Series
LaB aNaLOG
Stainless Steel
NEW
implant connection 3,0
article Number S 53
aButMENt SCrEW
titanium ti6aL4V
hex 1,26 mm
recommended torque: 3,0: 15 Ncm
NEW
implant connection 3,0
article Number S 67
LaB SCrEW
red-coated
NEW
implant connection 3,0 3,5/4,0 3,5/4,0 4,5/5,0
article Number S 67 L S 60 L S 60 L S 61 L
implant connection 3,0 3,5/4,0 4,5/5,0
Products indicated with ® are registered brand names of respective manufactures.
the S-Series abutments are compatible with
astra tech OsseoSpeed® implants
S-Series
61S-Series
S-Se
rie
sA
stra
Tec
h O
sseo
Sp
eed
®
The S-Series abutments are compatible withAstra Tech OsseoSpeed® Implants
tEMPOrarY aButMENt
titanium Grade 5 CF
incl. abutment screw
recommended torque: 3,0: 15 Ncm3,5/4,0: 20 Ncm4,5/5,0: 20 Ncm
NEW
implant connection 3,0 3,5/4,0 4,5/5,0
article Number S 3530 S 3500 S 3520
StraiGht aButMENtGiNGiVa hEiGht 1,5 MM
titanium Grade 5 CF
incl. abutment screw
recommended torque: 3,0: 15 Ncm
NEW
abutment Ø (mm) 3,5
implant connection 3,0
article Number S 130
aNGLED aButMENt 16°GiNGiVa hEiGht 1,5 MM
titanium Grade 5 CF
incl. abutment screw
recommended torque: 3,0: 15 Ncm
NEW
abutment Ø (mm) 3,5
implant connection 3,0
article Number S 230
medentiCAD®
titaNiuM BaSE FOr ZirkONiuM aButMENt 2. GENEratiON
Wax uP hEiGht 3,5 MM
titanium Grade 5 CF
incl. abutment screw
recommended torque: 3,0: 15 Ncm
NEW
Gingiva height (mm) 0,6
implant connection 3,0
article Number S 1030
titaNiuM BaSE FOr ZirkONiuM aButMENt 2. GENEratiON
Wax uP hEiGht 5,5 MM
titanium Grade 5 CF
incl. abutment screw
recommended torque: 3,0: 15 Ncm
NEW
Gingiva height (mm) 0,6
implant connection 3,0
article Number S 1130
implant connection 3,0 3,5/4,0 3,5/4,0 4,5/5,0
62 S-Series
implant connection 3,0 3,5/4,0 3,5/4,0 4,5/5,0 4,5/5,0
titaNiuM BaSE FOr BarS aND BriDGES rOtatiNG
Wax uP hEiGht 3,5 MM
titanium Grade 5 CF
incl. abutment screw
recommended torque: 3,5/4,0: 25 Ncm4,5/5,0: 25 Ncm
NEW
Gingiva height (mm) 0,6 0,6
implant connection 3,5/4,0 4,5/5,0
article Number S 1500 S 1520
SCaNBODY 2. GENEratiON
titanium, special-coated incl. Screw
for titanium base 2. Generation and MedentiCaD abutment
for intra-oral scanning
sterilisable
NEW
implant connection 3,0
article Number S 1430
MedentiCaD-aButMENt
the customised, single-part abutment incl. abutment screw
titanium Grade 5 CF
recommended torque: 3,0: 15 Ncm
NEW
implant connection 3,0
article Number S 9030
NEWMedentiCaD Wax uP BaSE
incl. Screw incl. Scan
Steel
attENtiON: For use on the Model only!
implant connection 3,0
article Number S 9130
63S-Series
S-Se
rie
sA
stra
Tec
h O
sseo
Sp
eed
®
The S-Series abutments are compatible withAstra Tech OsseoSpeed® Implants
medentiBASE®
MedentiBaSE aDhESiVE CaP FOr PaSSiVE-Fit
titanium adhesive Cap short S 4800 incl. Bridge screwPlastic adhesive Casing short S 4810 incl. Modelling screwtitanium adhesive base long S 4820 incl. Bridge screwPlastic adhesive base long S 4830 incl. Modelling screw
recommended torque: 15 Ncm
NEW
article Number S 4800 S 4810 S 4820 S 4830
MedentiBaSE Finisher connection geometry M 17 MedentiBaSE Finisher screw head M 18
Carbide
this is used to finish the fitting surfaces for the plastic cap S 4710 after casting. the finishers are used in the processing holder prosthetic M 04.
NEW
article Number M 17 M 18
64 S-Series
medentiLOC®
attENtiON: to screw in the angled MedentiLOC abutments you need a special turning instrument Driver hex 1,26 mm M 03-7 or M 10-7.
MedentiLOC aButMENt
aNGLED 15°
titanium Grade 5 CF
titanium Nitrit Coating
two-piece incl. Screw
implant connection 3,5/4,0 mm
recommended torque: 25 Ncm
NEW
Gingiva height (mm) 1 2 3 4 5
article Number S 2500 S 2600 S 2700 S 2800 S 2900
turNiNG iNStruMENt FOr MEDENtiLOC- aButMENt
aNGLED
Lab Screwdriver/ratchet
type MedentiLOC angled
MedentiLOC angled
article Number M 03-7 M 10-7
GiNGiVa hEiGht MEaSuriNG tOOL aLtuStM
MedentiLOC
LaB aNaLOG
Stainless Steel
NEW
type Gingiva height measuring tool altustM
MedentiLOC angled
article Number 2013.901 57
SCrEW for MedentiLOC-aButMENt
aNGLED
recommended torque: 25 Ncm
implant connection 3,5/4,0
article Number S 65
NOVaLOC™ PrOCESSiNG PaCkaGEMatrix housing titanium/PEEk retention insert white : retention value: light retention insert yellow : retention value: medium
retention insert green : retention value: strong
Mounting Collar Silicone
2 Pieces per package
incl. mounting insert
Material Matrix housing
titanium PEEk
article Number 2010.601 2010.611
65S-Series
S-Se
rie
sA
stra
Tec
h O
sseo
Sp
eed
®
The S-Series abutments are compatible withAstra Tech OsseoSpeed® Implants
PLEASE NOTE: All OptilocTM abutments are available at the end of 2013.Find more details about OptiloctM abutments on page 82
OPtiLOC™ aButMENt
titanium Nitrit Coating
one-piece
implant connection 3,5/4,0 mm
recommended torque: 25 Ncm
NEW
Gingiva height (mm) 1 2 3 4 5
article Number S 5000 S 5100 S 5200 S 5300 S 5400
OPtiLOC™ PrOCESSiNG PaCkaGE NEW
Matrix housing CoCr/PEEkretention insert white : retention value: light retention insert yellow : retention value: medium
retention insert green : retention value: strong
Mounting Collar Silicone
2 Pieces per package
Material Matrix housing
CoCr PEEk
article Number 2012.501 2012.511
turNiNG iNStruMENt
FOr OPtiLOCtM aButMENt
Lab Screwdriver/ratchet
type short long
article Number M 11-9 M 10-9
GiNGiVa hEiGht MEaSuriNG tOOL aLtuStM
NEW
type Gingiva height measuring tool altustM
article Number 2013.901
66 T-Series
tYPE 1 = aNGLED OVEr FLat
DEtaiLED ViEW
Exact view of the direction of the angulation (indexing) of all angled abutments.
tYPE 2 = aNGLED OVEr EDGE
Products indicated with ® are reg-istered brand names of respective manufactures.
the t-Series abutments are compatible with
Dentsply-Friadent Frialit/xive® implants
t-Series
implant connection 3,4 3,8 4,5 5,5
LaB SCrEW
red-coated
NEW
implant connection 3,4 3,8 4,5 5,5
article Number t 60 L t 60 L t 60 L t 60 L
tEMPOrarY aButMENt
titanium Grade 5 CF
incl. abutment screw
recommended torque: 25 Ncm
NEW
implant connection 3,4 3,8 4,5
article Number t 3500 t 3505 t 3510
67T-Series
T-S
eri
es
Den
tsp
ly-F
riad
ent
Fr
ialit
/Xiv
e®
The T-Series abutments are compatible withDentsply-Friadent Frialit/Xive® Implants
tYPE 2 = aNGLED OVEr EDGE
medentiCAD®
titaNiuM BaSE FOr BarS aND BriDGES rOtatiNG
Wax uP hEiGht 3,5 MM
titanium Grade 5 CF
incl. abutment screw
recommended torque: 25 Ncm
NEW
Gingiva height (mm) 0,3 0,3 0,6 0,6
implant connection 3,4 3,8 4,5 5,5
article Number t 1500 t 1505 t 1510 t 1520
medentiBASE®
MedentiBaSE aDhESiVE CaP FOr PaSSiVE-Fit
titanium adhesive Cap short t 4800 incl. Bridge screwPlastic adhesive Casing short t 4810 incl. Modelling screwtitanium adhesive base long t 4820 incl. Bridge screwPlastic adhesive base long t 4830 incl. Modelling screw
recommended torque: 15 Ncm
NEW
article Number t 4800 t 4810 t 4820 t 4830
MedentiBaSE Finisher connection geometry M 17 MedentiBaSE Finisher screw head M 18
Carbide
this is used to finish the fitting surfaces for the plastic cap t 4710 after casting. the finishers are used in the processing holder prosthetic M 04.
NEW
article Number M 17 M 18
68 T-Series
medentiLOC®
attENtiON: to screw in the angled MedentiLOC abutments you need a special turning instrument Driver hex 1,26 mm M 03-7 or M 10-7.
MedentiLOC aButMENt
aNGLED 15° - tYPE 1
titanium Grade 5 CF
titanium Nitrit Coating
two-piece incl. Screw
implant connection 3,4 mm
recommended torque: 25 Ncm
NEW
Gingiva height (mm) 1 2 3 4 5
article Number t 2500-1 t 2600-1 t 2700-1 t 2800-1 t 2900-1
MedentiLOC aButMENt
aNGLED 15° - tYPE 1
titanium Grade 5 CF
titanium Nitrit Coating
two-piece incl. Screw
implant connection 3,8 mm
recommended torque: 25 Ncm
NEW
Gingiva height (mm) 1 2 3 4 5
article Number t 2505-1 t 2605-1 t 2705-1 t 2805-1 t 2905-1
MedentiLOC aButMENt
aNGLED 15° - tYPE 1
titanium Grade 5 CF
titanium Nitrit Coating
two-piece incl. Screw
implant connection 4,5 mm
recommended torque: 25 Ncm
NEW
Gingiva height (mm) 1 2 3 4 5
article Number t 2510-1 t 2610-1 t 2710-1 t 2810-1 t 2910-1
turNiNG iNStruMENt FOr MEDENtiLOC- aButMENt
aNGLED
Lab Screwdriver/ratchet
type MedentiLOC angled
MedentiLOC angled
article Number M 03-7 M 10-7
GiNGiVa hEiGht MEaSuriNG tOOL aLtuStM
MedentiLOC
LaB aNaLOG
Stainless Steel
NEW
type Gingiva height measuring tool altustM
MedentiLOC angled
article Number 2013.901 57
69T-Series
T-S
eri
es
Den
tsp
ly-F
riad
ent
Fr
ialit
/Xiv
e®
The T-Series abutments are compatible withDentsply-Friadent Frialit/Xive® Implants
SCrEW for MedentiLOC-aButMENt
aNGLED
recommended torque: 25 Ncm
implant connection 3,4 3,8 4,5
article Number t 62 t 62 t 62
NOVaLOC™ PrOCESSiNG PaCkaGEMatrix housing titanium/PEEk retention insert white : retention value: light retention insert yellow : retention value: medium
retention insert green : retention value: strong
Mounting Collar Silicone
2 Pieces per package
incl. mounting insert
Material Matrix housing
titanium PEEk
article Number 2010.601 2010.611
70 T-Series
PLEASE NOTE: All OptilocTM abutments are available at the end of 2013.Find more details about OptiloctM abutments on page 82
OPtiLOC™ aButMENt
titanium Nitrit Coating
one-piece
implant connection 3,4 mm
recommended torque: 25 Ncm
NEW
Gingiva height (mm) 1 2 3 4 5
article Number t 5000 t 5100 t 5200 t 5300 t 5400
OPtiLOC™ aButMENt
titanium Nitrit Coating
one-piece
implant connection 3,8 mm
recommended torque: 25 Ncm
NEW
Gingiva height (mm) 1 2 3 4 5
article Number t 5005 t 5105 t 5205 t 5305 t 5405
OPtiLOC™ aButMENt
titanium Nitrit Coating
one-piece
implant connection 4,5 mm
recommended torque: 25 Ncm
NEW
Gingiva height (mm) 1 2 3 4 5
article Number t 5010 t 5110 t 5210 t 5310 t 5410
OPtiLOC™ PrOCESSiNG PaCkaGE NEW
Matrix housing CoCr/PEEkretention insert white : retention value: light retention insert yellow : retention value: medium
retention insert green : retention value: strong
Mounting Collar Silicone
2 Pieces per package
Material Matrix housing
CoCr PEEk
article Number 2012.501 2012.511
turNiNG iNStruMENt
FOr OPtiLOCtM aButMENt
Lab Screwdriver/ratchet
type short long
article Number M 11-9 M 10-9
GiNGiVa hEiGht MEaSuriNG tOOL aLtuStM
NEW
type Gingiva height measuring tool altustM
article Number 2013.901
71T-Series
T-S
eri
es
Den
tsp
ly-F
riad
ent
Fr
ialit
/Xiv
e®
The T-Series abutments are compatible withDentsply-Friadent Frialit/Xive® Implants
72 Y-Series
aButMENt SCrEW
titanium ti6aL4V
hex 1,0 mm
recommended torque: 25 Ncm
NEW
implant connection 3,5-7,0
article Number Y 61
LaB SCrEW
red-coated
NEW
implant connection 3,5-7,0
article Number Y 61 L
implant connection 3,5-7,0
Products indicated with ® are registered brand names of respective manufactures.
the Y-Series abutments are compatible with
Dentsply-Friadent ankylos® implants
Y-Series
73Y-Series
Y-S
eri
es
Den
tsp
ly-F
riad
ent
A
nky
los®
The Y-Series abutments are compatible withDentsply-Friadent Ankylos® Implants
medentiCAD®
SCaNBODY 2. GENEratiON
rOtatiNG
titan, special-coated
inkl. Screw
for titanium Base bars and bridges
for intra-oral scanning
sterilisable
NEW
implant connection 3,5-7,0
article Number Y 1400
titaNiuM BaSE FOr BarS aND BriDGES rOtatiNG
Wax uP hEiGht 3,5 MM
titanium Grade 5 CF
incl. abutment screw
recommended torque: 25 Ncm
NEW
Gingiva height (mm) 0,65 1,15
implant connection 3,5-7,0 3,5-7,0
article Number Y 1500 Y 1700
titaNiuM BaSE FOr BarS aND BriDGES rOtatiNG
Wax uP hEiGht 5,5 MM
titanium Grade 5 CF
incl. abutment screw
recommended torque: 25 Ncm
NEW
Gingiva height (mm) 0,65 1,15
implant connection 3,5-7,0 3,5-7,0
article Number Y 1600 Y 1800
medentiBASE®
MedentiBaSE aDhESiVE CaP FOr PaSSiVE-Fit
titanium adhesive Cap short Y 4800 incl. Bridge screwPlastic adhesive Casing short Y 4810 incl. Modelling screwtitanium adhesive base long Y 4820 incl. Bridge screwPlastic adhesive base long Y 4830 incl. Modelling screw
recommended torque: 15 Ncm
NEW
article Number Y 4800 Y 4810 Y 4820 Y 4830
MedentiBaSE Finisher connection geometry M 17 MedentiBaSE Finisher screw head M 18
Carbide
this is used to finish the fitting surfaces for the plastic cap Y 4710 after casting. the finishers are used in the processing holder prosthetic M 04.
NEW
article Number M 17 M 18
implant connection 3,5-7,0
74 Y-Series
medentiLOC®
GiNGiVa hEiGht MEaSuriNG tOOL aLtuStM
NEW
type Gingiva height measuring tool altustM
article Number 2013.901
NOVaLOC™ PrOCESSiNG PaCkaGEMatrix housing titanium/PEEk retention insert weiß : abzugsgewicht: light retention insert gelb : abzugsgewicht: medium
retention insert grün : abzugsgewicht: strong
Mounting collar Silicone
2 Stück pro Packung
incl. Montageeinsatz
Material Matrix housing
titanium PEEk
article Number 2010.601 2010.611
75Y-Series
Y-S
eri
es
Den
tsp
ly-F
riad
ent
A
nky
los®
The Y-Series abutments are compatible withDentsply-Friadent Ankylos® Implants
PLEASE NOTE: All OptilocTM abutments are available at the end of 2013.Find more details about OptiloctM abutments on page 82
OPtiLOCtM aButMENt
titanium Nitrit Coating
one-piece
implant connection 3,5-7 mm
recommended torque: 25 Ncm
NEW
Gingiva height (mm) 1 2 3 4 5
article Number Y 5000 Y 5100 Y 5200 Y 5300 Y 5400
OPtiLOC™ PrOCESSiNG PaCkaGE NEW
Matrix housing CoCr/PEEkretention insert weiß : abzugsgewicht: light retention insert gelb : abzugsgewicht: medium
retention insert grün : abzugsgewicht: strong
Mounting collar Silicone
2 Stück pro Packung
Material Matrix housing
CoCr PEEk
article Number 2012.501 2012.511
turNiNG iNStruMENt
FOr OPtiLOCtM aButMENt
Lab Screwdriver/ratchet
type short long
article Number M 11-9 M 10-9
GiNGiVa hEiGht MEaSuriNG tOOL aLtuStM
NEW
type Gingiva height measuring tool altustM
article Number 2013.901
77Tools
To
ols
WOODEN tOOL BOx „MEDENtika“without prostetic tools
article Number MB 01
WOODEN tOOL BOx
„Manual insert long“
Wooden tool box offers space for the optional ratchet M 12 and further Manual inserter
Content: M 10-1, M 10-2,M 10-3, M 10-4, M 10-5
article Number MB 04-k
WOODEN tOOL BOx
„Manual insert short“
Wooden tool box offers space for the optional ratchet M 12 and further Manual inserter
Content:M 11-1, M 11-2,M 11-3, M 11-4, M 11-5
article Number MB 05-k
MaChiNiNG hOLDEr PrOSthEtiC DENtiStrY iN WOODEN tOOL BOx
Box incl. machining holder prosthetic dentistry and allen key
Content: M 04 and allen key
article Number MB 05
78
COMPartMENt BOx
without content
Polystyrene plastic
30 compartments
article Number MB 04
PrOSthEtiC traY
without prosthetic tools
sterilisable
Massive PPP milled
Stainless Steel sliding cover
laser cutted
custom equippedarticle Number M 13
Offers space for: torque ratchet M 12 and inserts for M 12, M 10-1, M 11-1, M 10-2, M 11-2, M 10-3, M 11-3, M 10-4, M 11-4, M 10-5 M 11-5, M 11-6
tOrquE ratChEt
with torque adjustment up to max. 40 Ncm
Stainless Steel hardened
type ratchet/handshaft
article Number M 12
MedentiBaSE SCrEW DriVEr/ratChEt
two-piece
Stainless Steel
article Number M 11-6
aDaPtEr FOr ratChEt M 12
handshaft to iSO-Shaft
article Number M 14
79Tools
To
ols
iNSErt FOr LaBOratOrY SCrEW-DriVEr aND ratChEt
Stainless steel hardened
iSO-long/short for ratchet M 01 hand-long/short for ratchet M 12
C-SeriesD-Seriesi-Seriesr-SeriesS-SeriesMedentiLOC straight
hex 0,05“ (1,26 mm)
type iSO-long iSO-short hand-long hand-short
article Number M 03-1 M 09-1 M 10-1 M 11-1
iNSErt FOr LaBOratOrY SCrEW-DriVEr aND ratChEt
Stainless steel hardened
iSO-long/short for ratchet M 01 hand-long/short for ratchet M 12
t-Seriesh-Series
hex 1,20 mm
type iSO-long iSO-short hand-long hand-short
article Number M 03-2 M 09-2 M 10-2 M 11-2
iNSErt FOr LaBOratOrY SCrEW-DriVEr aND ratChEt
Stainless steel hardened
iSO-long/short for ratchet M 01 hand-long/short for ratchet M 12
Y-Series
hex 1,00 mm
type iSO-long iSO-short hand-long hand-short
article Number M 03-3 M 09-3 M 10-3 M 11-3
iNSErt FOr LaBOratOrY SCrEW-DriVEr aND ratChEt
Stainless steel hardened
iSO-long/short for ratchet M 01 hand-long/short for ratchet M 12
N-SeriesL-SeriesB-Series
torx t6
type iSO-long iSO-short hand-long hand-short
article Number M 03-4 M 09-4 M 10-4 M 11-4
iNSErt FOr LaBOratOrY SCrEW-DriVEr aND ratChEt
Stainless steel hardened
iSO-long/short for ratchet M 01 hand-long/short for ratchet M 12
E-SeriesF-Seriesk-SeriesuG
type iSO-long iSO-short hand-long hand-short
article Number M 03-5 M 09-5 M 10-5 M 11-5
80
turNiNG iNStruMENt FOr MEDENtiLOC- aButMENt
StraiGht/aNGLED
iSO for ratchet M 01
hand for ratchet M 12
type MedentiLOC straight
MedentiLOC straight
MedentiLOC angled
MedentiLOC angled
article Number M 03-1 M 10-1 M 03-7 M 10-7
turNiNG iNStruMENt FOr NOVaLOCtM- aButMENt
hand for ratchet M 12
type short long
article Number M 11-8 M 10-8
turNiNG iNStruMENt FOr OPtiLOCtM- aButMENt
hand for ratchet M 12
type short long
article Number M 11-9 M 10-9
LaBOratOrY SCrEW DriVEr
for iSO-inserts
Stainless Steel
torque 10 Ncm
article Number M 03
MaChiNiNG hOLDEr PrOSthEtiC DENtiStrY
Stainless Steel massive
fits for all inserts of machining holder
article Number M 04
MedentiBaSE Finisher connection geometry MedentiBaSE Finisher connection geometry rN 4,8 MedentiBaSE Finisher screw head
hartmetallthis is used to finish the fitting surfaces for the plastic cap 4710 after casting.
the finishers are used in the processing holder prosthetic M 04. Finisher M 19 is used for plastic cap N 4710.
NEW
connection geometry
connection geometry
rN 4,8
screw head
article Number M 17 M 19 M 18
81Tools
To
ols
PiNS
For titanium base
anodized aluminium
8,00 Eur 8,00 Eur
fits for: C 1500 - C 1520h 800 - h 820h 1000 - h 1020h 1100 - h 1120h 1500 - h 1520k 800, k 1000k 1100, k 1500N 800, N 1000N 1100S 1030, S 1130S 1530t 800 - t 820t 1000 - t 1020t 1100 - t 1120t 1500 - t 1520
fits for: B 1000, B 1100B 1500D 1000, D 1010D 1100, D 1110D 1200, D 1210D 1300, D 1310D 1500, D 1510F 800, F 1000F 1100, F 1200F 1300, F 1500L 801, L 811L 1000, L 1010L 1100, L 1110L 1500, L 1510S 800, S 1000S 1100, S 1200S 1300, S 1500
article Number M 05-1 M 05-2
PiNS
For titanium base
anodized aluminium
fits for: S 820S 1020, S 1220S 1120, S 1320S 1520
fits for: E 800 - E 830E 1000 - E 1030E 1100 - E 1130E 1500 - E 1520F 810, F 1010F 1110, F 1210F 1310, F 1510i 800 - i 820i 1000 - i 1020i 1100 - i 1120i 1500 - i 1520k 810, k 1010k 1110, k 1510N 810, N 820N 1010, N 1020N 1110, N 1120N 1510, N 1520r 800 - r 820r 1000 - r 1020r 1100 - r 1120r 1500 - r 1520
article Number M 05-3 M 05-4
82
Optiloc™
For all those who want to stop searching for the optimal attachment system
or
simply dream of a small diameter Locator®.
83OptilocTM
Slimmer than Locator®, lower than ball attachments.
Optimal dimensions of the matrix housing allow the placement in narrow spaces.
the clever technology also allows a proper fixation of the denture on only 2 implants. the Optiloc™ matrix tolerates small movements of the denture without uncoupling from the abutment.
Well-known problems when fixing a matrix housing chair-side have been solved with Optiloc™.
the matrix has a clear defined position on the abut-ment which also reduces the risk of composite inte-gration into the housing.
1. Optimal dimensions
2. Optimal combination of Locator® and ball abutment
84
the unique design of the abutment facilitates the daily insertion of the denture and prevents the retention inserts from being damaged.
the abutment holds independently on the screw driver and can be safely transferred to the im-plant. improved material properties reduce the wear of abutments. available in various gingiva heights and compatible on a variety of implant systems.
the Optiloc™ matrix system is based on the es-tablished Novaloc™ technology.
Different retention forces fixate the denture and divergences can be corrected up to 40 degrees between two implants. the Optiloc™ system of-fers an optimal user-friendliness and longevity.
3. Optimal comfort for the patient
4. Optimal user-friendliness and wear resistance
5. Optimal matrix system
85OptilocTM
Picture Part no. Part description Specifications Amount per pack-
age
Preis EUR
2012.201 OptilocTM Equipment Box
Incl. 2 tools tool brown 2012.341 tool grey 2012.351 (without initial load)
1 pc.
2012.501OptilocTM Processing package CoCr
• CoCr matrix housing (1 pc)• retention insert white (1 pc)• retention insert yellow (1 pc)• retention insert green (1 pc)• Mounting collar, silicone (1 pc)
2 pcs.
2012.511OptilocTM Processing package PEEK
• PEEk matrix housing (1 pc)• retention insert white (1 pc)• retention insert yellow (1 pc)• retention insert green (1 pc)• Mounting collar, silicone (1 pc)
2 pcs.
2012.301OptilocTM Matrix housing CoCr
Matrix housing: CoCr 4 pcs.
2012.302OptilocTM Matrix housing PEEK
Matrix housing: PEEk 4 pcs.
2012.303OptilocTM Matrix housing elliptic, CoCr
Matrix housing: CoCr 4 pcs.
2012.304OptilocTM Matrix housing elliptic, PEEK
Matrix housing: PEEk 4 pcs.
special accessory
2012.305OptilocTM Matrix housing CoCr with attachment option
Matrix housing: CoCr 4 pcs.
special accessory
2012.310OptilocTM Retention insert red
PEEkRetention force:
extra-light
4 pcs.
2012.311OptilocTM Retention insert white
PEEkRetention force:
light 4 pcs.
2012.312OptilocTM Retention insert yellow
PEEkRetention force:
medium 4 pcs.
2012.313OptilocTM Retention insert green
PEEkRetention force:
strong 4 pcs.
2012.314OptilocTM Retention insert blue
PEEkRetention force:
extra-strong
4 pcs.
special accessory
2012.315OptilocTM Retention insert black
PEEkRetention force:
ultra-strong
4 pcs.
2012.321 OptilocTM Model analogue aluminium 4 pcs.
2012.322OptilocTM
Forming/fixing matrix PEEk 4 pcs.
2012.323 OptilocTM Processing spacer POM C 4 pcs.
2012.324OptilocTM
Mounting collar SiliconeSilicone 10 pcs.
2012.331OptilocTM Model analogue reposition aid + laboratory abutment driver blue
aluminium, Steel 1 pc.
2012.341OptilocTM Mounting and de-mounting tool for Retentions inserts (brown)
aluminium, Steel 1 pc.
2012.351OptilocTM
Matrix housing extractor (grey)
aluminium, Steel 1 pc.
86
Matrix system for MedentiLOC®
10 reasons why you choose Novaloc™
the Novaloc™ matrix system with its newly developed technology is a ready-made con-nective element to fix removable dentures to MedentiLOC® abutments.
Matrix housing in beige PEEk; the solution when there is very little space or when not using metal is a prerequisite.
1. Matrix hOuSiNG MaDE OF titaNiuM Or PEEk
2. StrESS-FrEE MOuNtiNG aND rEMOViNG OF rEtENtiON iNSErtS
1. Mount retention inserts 1. hold demounting tool vertically over the retention insert
2. insert into the matrix housing
2. Set up with slight pressure
3. Clearly audible “click” 3. remove vertically upwards
iNSErt rEMOVE
87NovalocTM
1. Mount model analogue
1. heat extraction head
Special design:No more hot finger!
1. use the stainless steel finish
2. insert model analogue
2. heat matrix housing briefly
2. insert at an angle into the bore of the mounting insert
absolutely safe handling
3. apply leverage to remove matrix housing
3. By tipping easily removed from the matrix housing
3. thE iNGENiOuS NOVaLOC™ MODEL aNaLOGuE rEPOSitiON aiD
4. thE CLEVEr DEMOuNtiNG tOOL FOr MOuNtiNG iNSErtS
5. thE uSEr-FriENDLY NOVaLOC™ EquiPMENt BOx
6. thE “5-SECONDS” Matrix hOuSiNG ExtraCtOr
• No caps in the inventory• Ensures overview and order• Ordering number legible in the cover• No separation when the cover is closed• three special instruments for all sorts of manipulations
88
9. PrOCESSiNG SPaCEr NOW With BLOCkiNG CharaCtEriStiCS
7. NOVaLOC™ ONLY rEquirES 4 rEPLaCEMENt MaLES
8. FOrMiNG/FixiNG Matrix FOr a SaFE aND aCCuratE POSitiONiNG iN thE MOuth.
Conventional damage to Nylon inserts commercially available until now
a 5° inclination for the shaping of a self-retaining box for matrix attachment
For additional mechanical blocking
retention forcelight
retention forcemedium
retention force strong
retention forceextra-strong
Easy to understand colour code according to retention force.
Multivalent can also be used as a fixing matrix for templates, bite registers and rails
NEW: Clearly smaller and more precise than those form-ing matrices commercially available until now
10. CLEarLY LESS WEar aND tEar aS WELL aS SErViCiNG ExPENSE at thE rEtENtiON iNSErtS • Novaloc™ retention inserts need no central retention element
(considerable advantage with regard to damage) • PEEk has better physical properties and is considerably more hygienic than Nylon
89NovalocTM
Picture Part no. Part description Specifications Amount per pack-
age
Preis EUR
2010.101 NovalocTM Equipment Box Incl. 3 tools (without load)
1 pc.
2010.601NovalocTM
Processing package Titanium
• titanium matrix housing incl. mounting insert (1 pc)
• retention insert white (1 pc)• retention insert yellow (1 pc)• retention insert green (1 pc)• Mounting collar, silicone (1 pc)
2 pcs.
2010.611NovalocTM
Processing package PEEK
• PEEk matrix housing incl. mounting insert (1 pc)
• retention insert white (1 pc)• retention insert yellow (1 pc)• retention insert green (1 pc)• Mounting collar, silicone (1 pc)
2 pcs.
2010.701NovalocTM Matrix housing Titanium (incl. black mounting insert)
Matrix housing: titaniumMounting insert: PEEk
4 pcs.
2010.702NovalocTM Matrix housing PEEK (incl. black mounting insert)
Matrix housing: PEEkMounting insert: PEEk
4 pcs.
special accessory
2010.703
NovalocTM Matrix housing Titanium with attachment option (incl. black mounting insert)
Matrix housing: titaniumMounting insert: PEEk
4 pcs.
special accessory
2010.710NovalocTM
Retention insert redPEEkRetention force:
extra-light
4 pcs.
2010.711NovalocTM
Retention insert whitePEEkRetention force:
light 4 pcs.
2010.712NovalocTM
Retention insert yellowPEEkRetention force:
medium 4 pcs.
2010.713NovalocTM
Retention insert greenPEEkRetention force:
strong 4 pcs.
2010.714NovalocTM
Retention insert bluePEEkRetention force:
extra-strong
4 pcs.
special accessory
2010.715NovalocTM
Retention insert blackPEEkRetention force:
ultra-strong
4 pcs.
2010.721 NovalocTM Model analogue aluminium 4 pcs.
2010.722NovalocTM Forming/fixing matrix
PEEk 4 pcs.
2010.723NovalocTM
Processing spacer whitePOM C 4 pcs.
2010.724NovalocTM
Mounting collar, SiliconeSilicone 10 pcs.
2010.725NovalocTM
Mounting insert, blackPEEk 4 pcs.
2010.731NovalocTM Demounting tool for mounting inserts + model analogue reposition aid (blue)
aluminium, Steel 1 pc.
2010.741NovalocTM Mounting and de-mounting tool for Retention inserts (brown)
aluminium, Steel 1 pc.
2010.751NovalocTM Matrix housing Extractor (grey)
aluminium, Steel 1 pc.
90
Altus™ GiNGiVa hEiGht MEaSuriNG tOOL
too high or low lying abutments finally belong to the past!
Locates the highest gingiva position
read the measurement results outside the oral cavity and choose the correct abutment height.
quick positioning without screwing
ACCURATE DETERMINATION OF ThE gINgIvA LEvELS WITh ALTUS™ BEFORE ChOOSINg AN ABUTMENT
RECORD ThE CORRECT hEIghT WITh EASE.
91AltusTM
Locates the highest gingiva position
quick positioning without screwing
Gingiva plate
the altus™ gingiva height measuring tool allows the precise measurement of the gingiva height above the implant for ac-curate determination and choice of the abutment height.
altus™ convinces with ease of use. the positioning onto the implant is done with ease. No time-consuming screwing into the implant.
its specially shaped gingiva plate locates the highest gingiva position in all situations around the implant.
altus™ guarantees longevity in use and can be sterilized easily in the autoclave.
altus™ has a guide for tweezers to even access the most dif-ficult positions in the mouth.
altus™ gingiva height measuring tool consists of a slider (PEEk) and a multifunctional scale part (titanium).
altus™ can be used on a variety of platforms (expandable on request).
92
gUARANTEE
MEDENtika not only offers a 30 year guarantee for the Medentika and MedentiCaD abutments made from titanium manufactured and supplied by MEDENtika, including the abutment screw, but additionally offers a guarantee on the implants of other manufacturers inserted with the abutment. immediate restorations are specifically excluded from this guarantee. the guarantee for the implant applies for example if the manufacturer of the implant inserted with the abut-ment restricts or refuses to offer its guarantee on this because the implant was combined with a MEDENtika or MedentiCaD abutment.
For further information on this, consult our guarantee terms which we hereby explicitly refer you to.
as at: February 2013
93
as at: January 2012
gUARANTEE CONDITIONS
From 1 January 2012 we provide a guarantee on our original Medentika and MedentiCaD abutments („our products“), and additionally a guarantee on implants of other manufacturers combined with our products as follows:
We guarantee the replacement of our products without additional costs if they reveal material or manufactur-ing defects or they do not comply with our quality standards.
We guarantee the reimbursement of proven material costs for a replacement implant if an implant of another manufacturer was combined with our products after its integration and the manufacturer of the implant there-fore refuses to provide its guarantee for the implant because it was combined with our products.
the guarantee period for our products is 30 (thirty) years from delivery. We provide a guarantee on implants of other manufacturers for the same period of time as the manufacturer also provides a guarantee, but for a maximum period of 30 years from delivery. No new guarantee or extension of the guarantee is linked with the guarantee performance.
Our Locator and MedentiLOC abutments and Novaloc and SFiBar components are excluded from this guaran-tee. a guarantee period of 3 (three) applies for these products. all the die plates and their inserts are subject to natural wear and tear and are excluded from the guarantee.
No guarantee shall be granted:
• in the case of immediate restorations • For damage of other products or the implants due to external impacts such as accidents or comparable
events and incorrect treatment • For failure of the implants of other manufacturers, such as material or manufacturing faults• For failure of our products or the implants in the case of contraindications such as alcoholism, diabetes or
drug addiction• For further claims and consequential damages such as laboratory costs or the costs of clinical and/or dental
treatment.
this voluntary guarantee is supplementary to the guarantee rights defined by law and the product liability and does not effect these. in addition, our General terms and Conditions of Sale shall apply.
the assignment of rights from this guarantee requires our consent.
MEDENtika guarantee for our products and the implants of other manufacturers
1 aPPLiCatiON all our deliveries or services (hereinafter, „Service“) and offers - including
those in the future - are effected solely based on our General terms and Conditions of Business (hereinafter, „General terms“). these are a com-ponent of all contracts with us; they are also valid even if no particular reference is made to them. From our website, the General terms can be downloaded or printed as a file. Our General terms apply in relation to companies (§§ 14, 310 of the German Civil Code (Bürgerliches Gesetzbu-ch, „BGB“)). Our General terms have exclusive application. the customer‘s general terms and conditions of business do not apply, even if we have not separately objected to them. these do not become the content of a contract even if an order is accepted or carried out without any reserva-tion.
2 CONCLuSiON OF CONtraCtS unless otherwise expressly declared, our offers are non-binding. For the
scope and the subject matter of the Service, the delivery note is control-ling. if the delivery note includes changes to the customer‘s order, it is deemed to be agreed if the customer receives the Service without any res-ervation and does not object to the Service in writing within a reasonable period.
any reference to technical standards serves the purpose of describing the Service, and is not a warranty for a particular condition. information or il-lustrations (e.g. weights, measures, utility values and technical data) are only approximate, to the extent that the usability for the contractual pur-pose does not require exact conformity. Obvious mistakes and any error in printing, writing, computing or calculation do not result in any obliga-tion and cannot establish any claim.
3 PriCES, PaYMENt Our current list prices apply in every case. unless otherwise agreed, pay-ments are due 10 days after invoicing without any deduction. the timeli-ness of any payment is determined by the crediting of our account. the customer is entitled to a right of retention or the right to engage in a set-off only to the extent that its counterclaims are undisputed or have been established as legally effective.
4 DELiVErY the delivery period amounts to 1 to 2 business days (Mo. - Fr., excluding
holidays). the delivery period is deemed to be adhered to if the shipping company collects the package for shipment within this period. We assume no liability for any delay on the part of the shipping company. We shall insure our Service or the transport at the previous instruction and the ex-pense of the customer. any shipment is effected without any guarantee of the cheapest method, at the expense and risk of the customer.
5 rEtENtiON OF titLE For any Service, we reserve the right of ownership until the receipt of all
payments arising from the business relationship. in the event of a resale, the customer hereby assigns to us as security all claims arising from such resale against the custo-mer and/or its insurance policy. the customer is authorised to collect receivables in our name; this authorisation is revoca-ble.
6 riGhtS rELatiNG tO DEFECtS immediately after receipt, the customer must carefully examine the Ser-
vice that has been received. We must be immediately notified in writing of any defect („Defect Notice“). if there are any transport damages, the shipment company is to be provided documentation. in all other respects, § 377 of the German Commercial Code (handelsgesetzbuch, „hGB“) ap-plies. if there is no notification, the Service is deemed to be acceptable and in accordance with the order, unless this concerns a defect that was not recognisable upon the examination. Such defects must be notified im-mediately after their discovery. this does not apply to any fraudulent con-cealment of a defect. any resale or use of a Service subject to objection is deemed to be its approval, and the contract is deemed to be fulfilled; in this respect, any claim based on the defect is barred.
By entering into negotiations regarding Defect Notices, we do not waive the objection that such Defect Notices are not timely, unfounded or oth-erwise insufficient. any measure to reduce damages is not deemed to be the recognition of a defect.
Deviations from the agreed quality and scope caused by the materials, along with changes to the Service in the course of technical progress, in the design, the embodiment, the dimensions, the weight or the colour are permissible within the framework of tolerances customary in the industry, to the extent that they do not limit usability for the contractually planned use, there is no warranty and, upon an objective assessment, all of the facts are reasonable to the customer.
the customer is liable for unjustified Defect Notices, if the cause of the defect is in its area of responsibility and he was (at a minimum) negligent in not recognising this. We charge for expenses for which we are not re-sponsible within the framework of the liability for defects in accordance with our current list prices.
to the extent not attributable to us, we assume no warranty upon any un-suitable or improper use and/or improvement, any incorrect assembling and/or start-up by the customer or a third party, non-observance of pro-cessing guidelines or operating instructions, natural wear and tear, any incorrect or careless treatment or storage, maintenance or servicing that is not done on an orderly basis, any unsuitable operating material, any chemical, electro-chemical, electrical or environmentally caused influence. the same applies to changes to the Service undertaken without our con-sent, or the exchange of components or use of expendable materials that do not correspond to the original specifications, unless the defect is not based on such. the right to a price reduction is barred, unless the defect that is present is not merely immaterial, the defect was fraudulently con-cealed or the defect concerns a warranty for a particular condition.
in accordance with § 478 of the BGB, claims to recourse on the part of the customer exist only to that extent that the customer has not made an agreement with the consumer going beyond the statutory claims for defects. the suspension of the limitation period under § 479 of the BGB applies only if the customer has verifiably provided a guarantee to its customers.
7 LiaBiLitY in accordance with the statutory provisions, we are liable without any lim-
itation for personal injuries, under product liability law, upon the assump-tion of a warranty for a particular condition, for the malicious conceal-ment of defects, for damages that are based on intentional acts and to the extent that damages are covered by our operating liability insurance policy. Moreover, upon a grossly negligent violation of an obligation, we are liable according to the statutory provisions; solely upon a grossly neg-ligent violation of an obligation not substantial to the contract is our li-ability limited to foreseeable damages typical for contracts.
For slight negligence, we are liable upon the violation of material con-tractual obligations; such liability is hereby limited to foreseeable dam-ages typical for contracts, the emergence of which could be expected. in all other respects, our liability is barred. Material contractual obliga-tions are those whose fulfilment the proper carrying out of the contract is absolutely necessary and whose adherence the customer regularly re-lies and may rely.
Liability exclusions and limitations also apply for the benefit of our gov-erning bodies, statutory representatives, employees and other vicarious agents. the customer is obligated to maintain its own insurance policies in a scope customary in its industry and for its structure (particularly includ-ing business interruption insurance). any contributory negligence on the part of the customer must be taken into account.
8 LiaBiLitY LiMitatiON For any limitation of liability to foreseeable damages typical for contracts,
liability is limited to 50,000.00 euros per loss event; however, for all dam-ages within one calendar year, this is limited to the maximum of double this amount. We are also liable beyond the extent to which our insurer steps in to provide compensation for damages and furnishes payment.
any warranty claims on the part of the customer are time-barred in 12 months after the transfer/delivery of the Service. the statutory periods apply to deliberate or malicious content, to personal injuries or to claims under product liability law.
9 rEturN unopened, undamaged Services without signs of usage may be returned
within 4 weeks from the delivery date. a copy of the invoice must be at-tached. the customer shall bear the costs of the original shipment and the return. any shipment by mail subject to fees will not be accepted.
10 Data PrOtECtiON the customer provides its consent for our saving of its data (communica-
tion data, responsible employees, type and scope of its orders, etc.) until the contract is concluded. We may also use the data to inform customer of our products and Service, if these are typically used in connection with the products and Service that the customer acquired from us.
11 CONCLuDiNG PrOViSiONS any change or supplement to a contract that is not based on an individual
agreement requires written form (including by fax). this also applies to any waiver of the requirement of written form. if any provision of these terms and conditions is or becomes ineffective, this does not otherwise af-fect the validity of the terms and conditions. German law applies. For all disputes arising from the contract, the place of performance and area of jurisdiction of natural and legal entities that, upon the conclusion of the contract, are acting in the exercise of their commercial or independent professional activity (companies) is our registered office. however, we are entitled to bring suit against the customer at the court of the customer‘s residence.
gENERAL TERMS AND CONDITIONS OF BUSINESS OF MEDENTIKA gMBh
as at: January 2012
Medentika Gmbh
hammweg 8–1076549 hügelsheim
tel.: +49 (0)7229-69912-0Fax: +49 (0)7229-69912-20
E-Mail: [email protected]
Der WeberFink Gbr
Graphic Design Studio
www.weberfink.de
Design by:
Editor:
imprint
Product catalogue News 2013 Status July 2013: [PM 003_001]Medentika reserves the right to make modifications to the products through technical and dimensional improvements without prior notice; errors and printing errors excepted.
Edition:
Precision and Functionality:implant Components made in Germany
Medentika Gmbhhammweg 8–1076549 hügelsheim
tel.: +49 (0)72 29-69912-0Fax: +49 (0)72 29-69912-20
E-Mail: [email protected]